Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Quality, Exposure, and Health”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2013

Histopathological analysis of fish from Acorn Fork Creek, Kentucky exposed to hydraulic fracturing fluid releases

Fracking fluids were released into Acorn Fork, KY, a designated Outstanding State Resource Water, and habitat for the threatened Chrosomus cumberlandensis (Blackside Dace). As a result, stream pH dropped to 5.6 and stream conductivity increased to 35,000 μS/cm, and aquatic invertebrates and fish were killed or distressed. The objective of this study was to describe post-fracking water quality in Acorn Fork and evaluate if the changes in water quality could have extirpated Blackside Dace populations. Semotilus atromaculatus (Creek Chub) and Lepomis cyanellus (Green Sunfish) were collected from Acorn Fork a month after fracking in lieu of unavailable Blackside Dace. Tissues were histologically analyzed for indicators of stress and percent of fish with lesions. Fish exposed to affected Acorn Fork waters showed general signs of stress and had a higher incidence of gill lesions than unexposed reference fish. Gill lesions observed were consistent with exposure to low pH and toxic concentrations of heavy metals. Gill uptake of aluminum and iron was demonstrated at sites with correspondingly high concentrations of these metals. The abrupt and persistent changes in post-fracking water quality resulted in toxic conditions that could have been deleterious to Blackside Dace health and survival.

Southeastern Naturalist↗
USGS2018

Concentrations of lead and other inorganic constituents in samples of raw intake and treated drinking water from the municipal water filtration plant and residential tapwater in Chicago, Illinois, and East Chicago, Indiana, July–December 2017

The U.S. Geological Survey (USGS) Environmental Health Mission Area (EHMA) is providing comprehensive science on sources, movement, and transformation of contaminants and pathogens in watershed and aquifer drinking-water supplies and in built water and wastewater infrastructure (referred to as the USGS Water and Wastewater Infrastructure project) in the Greater Chicago Area and elsewhere in the United States, to fill data gaps identified by stakeholders and collaborators in drinking water and public health. EHMA Water and Wastewater Infrastructure research specifically provides insight into natural factors in the environment as well as those water-infrastructure components and processes (such as source-water corrosivity, treatment, plumbing, and so forth) that might influence human exposure to chemical and microbial contaminants at the residential tap. This infrastructure-exposure research role is fulfilled uniquely by the USGS and not by the U.S. Environmental Protection Agency (EPA), other agencies, or municipalities that focus on regulatory and policy activities and related compliance. The USGS approach to assessing the possible links between human health and chemical contaminant and pathogen exposure in drinking water is conducted in collaboration with public health experts and includes comprehensive characterization of the presence/absence and concentrations of more than 500 organic and 27 inorganic chemical constituents at the point of use (tap). Laboratory results for lead and other inorganic contaminants in Chicago, Illinois, and East Chicago, Indiana, residential tapwater are being released to ensure the timely release of quality-assured data to participants in the study. Concentrations of lead and other inorganic constituents were assessed in drinking water at the point of use (kitchen tap or filter) in 45 residential locations and in two locations within each of the two Chicago water purification plants and the two East Chicago water filtration plants during July–December 2017. Three methods were used for analyzing lead. The most sensitive method had a reporting limit of 0.020 micrograms per liter (µg/L). When using the most sensitive analytical method, lead was detected in 39 of 45 residential tapwater samples, with concentrations ranging from less than 0.020 µg/L to 5.31 µg/L (median of the detected values = 0.481 µg/L). Concentrations of lead also were detected in Lake Michigan intake water at all water purification/filtration plant facilities at concentrations ranging from 0.083 to 0.330 µg/L, but were not detected above the reporting limit in any samples of treated, pre-distribution drinking water at any of the water purification/filtration plant facilities. Because the USGS Water and Wastewater Infrastructure project in the Greater Chicago Area is focused on the potential human exposure to a broad suite of organic and inorganic contaminants in drinking water and is not focused specifically on lead, the sampling protocol did not include “first-draw,” stagnant sampling and samples were collected with point-of-use treatment in place, if present. Thus, the lead results reported herein are not appropriate for assessment of compliance with the EPA 1991 Lead and Copper Rule. Information resources for lead mitigation and water filtration are provided.

Illinois, Indiana↗
USGS2015

Agencies collaborate, develop a cyanobacteria assessment network

Cyanobacteria are a genetically diverse group of photosynthetic microorganisms that occupy a broad range of habitats on land and water all over the world. They release toxins that can cause lung and skin irritation, alter the taste and odor of potable water, and cause human and animal illness. Cyanobacteria blooms occur worldwide, and climate change may increase the frequency, duration, and extent of these bloom events. Rapid detection of potentially harmful blooms is essential to protect humans and animals from exposure. Information about potential for exposure, such as bloom duration, frequency, and extent, is especially critical for developing environmental management decisions during periods of limited resources and funding. The National Research Council (NRC) report Exposure Science in the 21st Century suggested that effectively assessing and mitigating exposures requires techniques for rapid measurement of a stressor, such as an algal bloom, across diverse geographic, temporal, and biologic scales (e.g., various bloom concentrations) and an enhanced infrastructure to address threats [ NRC , 2012]. The report specifically calls for approaches that use diverse information, such as satellite remote sensing, to identify and understand exposures that may pose a threat to ecosystems or human health. A collaborative effort integrates the work of the U.S. Environmental Protection Agency (EPA), NASA, the National Oceanic and Atmospheric Administration (NOAA), and the U.S. Geological Survey (USGS) to provide an approach for using satellite ocean color capabilities in U.S. fresh and brackish water quality management decisions. The overarching goal of this collaborative project is to detect and quantify cyanobacteria blooms using satellite data records in order to support the environmental management and public use of U.S. lakes and reservoirs. Satellite remote sensing tools may enable policy makers and environmental managers to assess the sustainability of watershed ecosystems and the services they provide, now and in the future. Satellite technology allows us to develop early-warning indicators of cyanobacteria blooms at the local scale while maintaining continuous national coverage.

Eos, Earth and Space Science News↗
USGS2004

Effects of Abandoned Coal-Mine Drainage on Streamflow and Water Quality in the Mahanoy Creek Basin, Schuylkill, Columbia, and Northumberland Counties, Pennsylvania, 2001

This report assesses the contaminant loading, effects to receiving streams, and possible remedial alternatives for abandoned mine drainage (AMD) within the Mahanoy Creek Basin in east-central Pennsylvania. The Mahanoy Creek Basin encompasses an area of 157 square miles (407 square kilometers) including approximately 42 square miles (109 square kilometers) underlain by the Western Middle Anthracite Field. As a result of more than 150 years of anthracite mining in the basin, ground water, surface water, and streambed sediments have been adversely affected. Leakage from streams to underground mines and elevated concentrations (above background levels) of acidity, metals, and sulfate in the AMD from flooded underground mines and (or) unreclaimed culm (waste rock) degrade the aquatic ecosystem and impair uses of the main stem of Mahanoy Creek from its headwaters to its mouth on the Susquehanna River. Various tributaries also are affected, including North Mahanoy Creek, Waste House Run, Shenandoah Creek, Zerbe Run, and two unnamed tributaries locally called Big Mine Run and Big Run. The Little Mahanoy Creek and Schwaben Creek are the only major tributaries not affected by mining. To assess the current hydrological and chemical characteristics of the AMD and its effect on receiving streams, and to identify possible remedial alternatives, the U.S. Geological Survey (USGS) began a study in 2001, in cooperation with the Pennsylvania Department of Environmental Protection and the Schuylkill Conservation District. Aquatic ecological surveys were conducted by the USGS at five stream sites during low base-flow conditions in October 2001. Twenty species of fish were identified in Schwaben Creek near Red Cross, which drains an unmined area of 22.7 square miles (58.8 square kilometers) in the lower part of the Mahanoy Creek Basin. In contrast, 14 species of fish were identified in Mahanoy Creek near its mouth at Kneass, below Schwaben Creek. The diversity and abundance of fish species in Mahanoy Creek decreased progressively upstream from 13 species at Gowen City to only 2 species each at Ashland and Girardville. White sucker (Catostomus commersoni), a pollution-tolerant species, was present at each of the surveyed reaches. The presence of fish at Girardville was unexpected because of the poor water quality and iron-encrusted streambed at this location. Generally, macroinvertebrate diversity and abundance at these sites were diminished compared to Schwaben Creek and other tributaries draining unmined basins, consistent with the observed quality of streamwater and streambed sediment. Data on the flow rate and chemistry for 35 AMD sources and 31 stream sites throughout the Mahanoy Creek Basin were collected by the USGS during high base-flow conditions in March 2001 and low base-flow conditions in August 2001. A majority of the base-flow streamwater samples met water-quality standards for pH (6.0 to 9.0); however, few samples downstream from AMD sources met criteria for acidity less than alkalinity (net alkalinity = 20 milligrams per liter as CaCO3) and concentrations of dissolved iron (0.3 milligram per liter) and total manganese (1.0 milligram per liter). Iron, aluminum, and various trace elements including cobalt, copper, lead, nickel, and zinc, were present in many streamwater samples at concentrations at which continuous exposure can not be tolerated by aquatic organisms without an unacceptable effect. Furthermore, concentrations of sulfate, iron, manganese, aluminum, and (or) beryllium in some samples exceeded drinking-water standards. Other trace elements, including antimony, arsenic, barium, cadmium, chromium, selenium, silver, and thallium, did not exceed water-quality criteria for protection of aquatic organisms or human health. Nevertheless, when considered together, concentrations of iron, manganese, arsenic, cadmium, chromium, copper, lead, nickel, and zinc in a majority of the streambed sediment samples from Mahanoy Creek and

Scientific Investigations Report↗
USGS2020

Evaluating the potential role of bioactive chemicals on the distribution of invasive Asian carp upstream and downstream from river mile 278 in the Illinois waterway

Two non-native carp species have invaded the Illinois Waterway and are a threat to Great Lakes ecosystems. Poor water quality in the upper Illinois Waterway, may be a factor contributing to the stalling of the carp population front near river mile 278. In 2015, the U.S. Geological Survey collected 4 sets of water samples from two sites upstream and 4 sites downstream from river mile 278, and one tributary. Each sample was analyzed for up to 649 unique parameters of which 287 were detected including 96 pesticides, 62 pharmaceuticals, 39 wastewater indicator compounds, 29 metals, 19 volatile organic compounds (VOCs), six disinfection by-products (DBPs), five hormones, and five carboxylic acids. Potential for bioactivity was estimated by comparing chemical concentrations to aquatic life or human health criteria and to in-vitro bioactivity screening results in the U.S EPA ToxCast™ database. The resulting hazard quotients and exposure-activity ratios (EARs) are toxicity indexes, that can be used to rank potential bioactivity of individual chemicals and chemical mixtures. This analysis indicates that several bioactive chemicals (BCs) including: carbendazim, 2,4-D, metolachlor, terbuthylazine, and acetochlor (pesticides); 1,4-dioxane (VOC); metformin, diphenhydramine, sulfamethoxazole, tramadol, fexofenadine, and the anti-depressants (pharmaceuticals); bisphenol A, 4-nonylphenol, galaxolide, 4-tert-octylphenol (wastewater indicator chemical); lead and boron (metals); and estrone (hormone) all occur in the upper Illinois Waterway at concentrations that produce elevated EARs values and may be adversely affecting carp reproduction and health. The clear differences in water quality upstream and downstream from river mile 278 with higher contaminant concentrations and potential bioactivity upstream could represent a barrier to carp range expansion.

Illinois↗
USGS2012

USGS Environmental health science strategy: providing environmental health science for a changing world: Public review release

America has an abundance of natural resources. We have bountiful clean water, fertile soil, and unrivaled national parks, wildlife refuges, and public lands. These resources enrich our lives and preserve our health and wellbeing. These resources have been maintained because of our history of respect for their value and an enduring commitment to their vigilant protection. Awareness of the social, economic, and personal value of the health of our environment is increasing. The emergence of environmentally driven diseases caused by environmental exposure to contaminants and pathogens is a growing concern worldwide. New health threats and patterns of established threats are affected by both natural and anthropogenic changes to the environment. Human activities are key drivers of emerging (new and re-emerging) health threats. Societal demands for land and natural resources, a better quality of life, improved economic prosperity, and the environmental impacts associated with these demands will continue to increase. Natural earth processes, climate trends, and related climatic events will add to the environmental impact of human activities. These environmental drivers will influence exposure to disease agents, including viral, bacterial, prion, and fungal pathogens, parasites, natural earth materials, toxins and other biogenic compounds, and synthetic chemicals and substances. The U.S. Geological Survey (USGS) defines environmental health science broadly as the interdisciplinary study of relations among the quality of the physical environment, the health of the living environment, and human health. The interactions among these three spheres are driven by human activities, ecological processes, and natural earth processes; the interactions affect exposure to contaminants and pathogens and the severity of environmentally driven diseases in animals and people. This definition provides USGS with a framework for synthesizing natural science information from across the Bureau and providing it to environmental, natural resource, agricultural, and public-health managers. The USGS is a Federal science agency with a broad range of natural science expertise relevant to environmental health. USGS provides scientific information and tools as a scientific basis for management and policy decision making. USGS specializes in science at the environment-health interface, by characterizing the processes that affect the interaction among the physical environment, the living environment, and people, and the resulting factors that affect ecological and human exposure to disease agents. This report describes a 10-year strategy that encompasses the portfolio of USGS environmental health science. It summarizes national environmental health priorities that USGS is best suited to address, and will serve as a strategic framework for USGS environmental health science goals, actions, and outcomes for the next decade. Implementation of this strategy is intended to aid coordination of USGS environmental health activities and to provide a focal point for disseminating information to stakeholders. The "One Health" paradigm advocated by the World Health Organization (WHO, 2011), and the American Veterinary Medicine Association (AVMA, 2008), among others, is based on a general recognition that the health of humans, animals, and the environment are inextricably linked. Thus, successful efforts to protect that health will require increased interdisciplinary research and increased communication and collaboration among the broader scientific and health community. This strategy is built upon that paradigm. The vision, mission, and five cornerstone goals of the USGS Environmental Health Science Strategy were developed with significant input from a wide range of stakeholders. Vision - The USGS is a premier source of the environmental health science needed to safeguard the health of the environment, fish, wildlife, and people. Mission - The mission of USGS in environmental health science is to contribute scientific information to environmental, natural resource, agricultural, and public-health managers, who use that science to support sound decision making. USGS provides the science to: - Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Goal 5: Prepare for and respond to environmental impacts and related health threats of natural and anthropogenic disasters. Goals 1 through 4 are intended to provide science to address environmental health threats in a logical order, from informing prevention and preparedness, to supporting systematic management response to environmental health issues. Goal 4 addresses the interaction among contaminants and pathogens, an issue of emerging concern in environmental health science. Goal 5 acknowledges the fact that natural and anthropogenic disasters can cause immediate and prolonged adverse environmental health threats. This strategy proposes that USGS take the following strategic science actions to achieve each of the five goals of this strategy: Goal 1: Identify, prioritize, and detect contaminants and pathogens of emerging environmental concern. - Strategic Science Action 1. - Prioritize contaminants and pathogens of emerging concern to guide research, detection, and management activities. - Strategic Science Action 2. - Conduct surveillance and monitoring to provide early warning of emerging health threats. - Strategic Science Action 3. - Develop approaches and tools that identify vulnerable environmental settings, ecosystems, and species. Goal 2: Reduce the impact of contaminants on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Systematically characterize the sources, occurrence, transport and fate of environmental contaminants to guide efforts to manage and mitigate contamination. - Strategic Science Action 2. - Evaluate the threats of contamination on the health of the environment, fish, wildlife, and people, and inform the associated management and protection efforts. - Strategic Science Action 3. - Characterize potential human exposure to support establishment of health-based standards or guidelines and contamination-reduction efforts. Goal 3: Reduce the impact of pathogens on the environment, fish, wildlife, and people. - Strategic Science Action 1. - Determine the biotic and abiotic factors that control the ecology of infectious diseases affecting natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 2. - Establish how natural and anthropogenic environmental changes affect the distribution and severity of infectious diseases in natural populations of aquatic and terrestrial species and potential transmission to other animals and humans. - Strategic Science Action 3. - Develop surveillance systems to identify changing patterns of disease activity in priority geographic areas. Goal 4: Discover the complex interactions and combined effects of exposure to contaminants and pathogens. - Strategic Science Action 1. - Identify how exposure to one class of disease agents (contaminants or pathogens) can make an organism more susceptible to effects from exposure to the other class of disease agents. - Strategic Science Action 2. - Implement interdisciplinary studies that characterize the effects of combined exposure to pathogens and contaminants. Goal 5: Prepare for and respond to the environmental impacts and related health threats of natural and anthropogenic disasters. - Strategic Science Action 1. - Establish a formal interdisciplinary science capability to rapidly assess the environmental health risks associated with disasters. - Strategic Science Action 2. - Enhance methods to anticipate, prepare for, and identify environmental, ecological, and related health impacts of future disasters. This strategy is one of seven USGS science strategies developed concurrently: - Climate and Land Use Change - Core Science Systems - Ecosystems - Energy and Mineral Resources - Environmental Health - Natural Hazards - Water. This strategy describes how USGS will address the highest priority environmental health issues facing the Nation. The ultimate intended outcome of this science strategy is prevention and reduction of adverse impacts to the quality of the environment, the health of our living resources, and human health. Communication with, and receiving input from, partners and stakeholders regarding their science needs is essential for successful implementation of this strategy. It is incumbent on USGS to reach out to all stakeholders to ensure that USGS efforts are focused on the highest priority environmental health issues and that products are provided in the most timely and usable form to all those who can use them. USGS must reach out to the scientific community, internally and externally, to ensure that our efforts are integrated with and take full advantage of the activities of others.

Open-File Report↗
USGS2018

When oil and water mix: Understanding the environmental impacts of shale development

Development of shale gas and tight oil, or unconventional oil and gas (UOG), has dramatically increased domestic energy production in the U.S. UOG resources are typically developed through the use of hydraulic fracturing, which creates high-permeability flow paths into large volumes of tight rocks to provide a means for hydrocarbons to move to a wellbore. This process uses significant volumes of water, sand, and chemicals, raising concerns about risks to the environment and to human health. Researchers in various disciplines have been working to make UOG development more efficient, and to better understand the risks to air quality, water quality, landscapes, human health, and ecosystems. Risks to air include releases of methane, carbon dioxide, volatile organic compounds, and particulate matter. Water-resource risks include excessive withdrawals, stray gas in drinking-water aquifers, and surface spills of fluids or chemicals. Landscapes can be significantly altered by the infrastructure installed to support large drilling platforms and associated equipment. Exposure routes, fate and transport, and toxicology of chemicals used in the hydraulic fracturing process are poorly understood, as are the potential effects on terrestrial and aquatic ecosystems and human health. This is made all the more difficult by an adaptable and evolving industry that frequently changes methods and constantly introduces new chemicals. Geoscientists responding to questions about the risks of UOG should refer to recent, rigorous scientific research.

GSA Today↗
USGS2017

Nutrient and pesticide contamination bias estimated from field blanks collected at surface-water sites in U.S. Geological Survey Water-Quality Networks, 2002–12

Potential contamination bias was estimated for 8 nutrient analytes and 40 pesticides in stream water collected by the U.S. Geological Survey at 147 stream sites from across the United States, and representing a variety of hydrologic conditions and site types, for water years 2002–12. This study updates previous U.S. Geological Survey evaluations of potential contamination bias for nutrients and pesticides. Contamination is potentially introduced to water samples by exposure to airborne gases and particulates, from inadequate cleaning of sampling or analytic equipment, and from inadvertent sources during sample collection, field processing, shipment, and laboratory analysis. Potential contamination bias, based on frequency and magnitude of detections in field blanks, is used to determine whether or under what conditions environmental data might need to be qualified for the interpretation of results in the context of comparisons with background levels, drinking-water standards, aquatic-life criteria or benchmarks, or human-health benchmarks. Environmental samples for which contamination bias as determined in this report applies are those from historical U.S. Geological Survey water-quality networks or programs that were collected during the same time frame and according to the same protocols and that were analyzed in the same laboratory as field blanks described in this report. Results from field blanks for ammonia, nitrite, nitrite plus nitrate, orthophosphate, and total phosphorus were partitioned by analytical method; results from the most commonly used analytical method for total phosphorus were further partitioned by date. Depending on the analytical method, 3.8, 9.2, or 26.9 percent of environmental samples, the last of these percentages pertaining to all results from 2007 through 2012, were potentially affected by ammonia contamination. Nitrite contamination potentially affected up to 2.6 percent of environmental samples collected between 2002 and 2006 and affected about 3.3 percent of samples collected between 2007 and 2012. The percentages of environmental samples collected between 2002 and 2011 that were potentially affected by nitrite plus nitrate contamination were 7.3 for samples analyzed with the low-level method and 0.4 for samples analyzed with the standard-level method. These percentages increased to 14.8 and 2.2 for samples collected in 2012 and analyzed using replacement low- and standard-level methods, respectively. The maximum potentially affected concentrations for nitrite and for nitrite plus nitrate were much less than their respective maximum contamination levels for drinking-water standards. Although contamination from particulate nitrogen can potentially affect up to 21.2 percent and that from total Kjeldahl nitrogen can affect up to 16.5 percent of environmental samples, there are no critical or background levels for these substances. For total nitrogen, orthophosphate, and total phosphorus, contamination in a small percentage of environmental samples might be consequential for comparisons relative to impairment risks or background levels. At the low ends of the respective ranges of impairment risk for these nutrients, contamination in up to 5 percent of stream samples could account for at least 23 percent of measured concentrations of total nitrogen, for at least 40 or 90 percent of concentrations of orthophosphate, depending on the analytical method, and for 31 to 76 percent of concentrations of total phosphorus, depending on the time period. Twenty-six pesticides had no detections in field blanks. Atrazine with 12 and metolachlor with 11 had the highest number of detections, mostly occurring in spring or early summer. At a 99-percent level of confidence, contamination was estimated to be no greater than the detection limit in at least 98 percent of all samples for 38 of 40 pesticides. For metolachlor and atrazine, potential contamination was no greater than 0.0053 and 0.0093 micrograms per liter in 98 percent of samples. For 11 of 14 pesticides with at least one detection, the maximum potentially affected concentration of the environmental sample was less than their respective human-health or aquatic-life benchmarks. Small percentages of environmental samples had concentrations high enough that atrazine contamination potentially could account for the entire aquatic-life benchmark for acute effects on nonvascular plants, that dieldrin contamination could account for up to 100 percent of the cancer health-based screening level, or that chlorpyrifos contamination could account for 13 or 12 percent of the concentrations in the aquatic-life benchmarks for chronic effects on invertebrates or the criterion continuous concentration for chronic effects on aquatic life.

Scientific Investigations Report↗
USGS2012

Modeling groundwater flow and quality

In most areas, rocks in the subsurface are saturated with water at relatively shallow depths. The top of the saturated zone—the water table—typically occurs anywhere from just below land surface to hundreds of feet below the land surface. Groundwater generally fills all pore spaces below the water table and is part of a continuous dynamic flow system, in which the fluid is moving at velocities ranging from feet per millennia to feet per day (Fig. 33.1). While the water is in close contact with the surfaces of various minerals in the rock material, geochemical interactions between the water and the rock can affect the chemical quality of the water, including pH, dissolved solids composition, and trace-elements content. Thus, flowing groundwater is a major mechanism for the transport of chemicals from buried rocks to the accessible environment, as well as a major pathway from rocks to human exposure and consumption. Because the mineral composition of rocks is highly variable, as is the solubility of various minerals, the human-health effects of groundwater consumption will be highly variable.

Book chapter↗
USGS2013

A review on cylindrospermopsin: the global occurrence, detection, toxicity and degradation of a potent cyanotoxin

Cylindrospermopsin is an important cyanobacterial toxin found in water bodies worldwide. The ever-increasing and global occurrence of massive and prolonged blooms of cylindrospermopsin-producing cyanobacteria poses a potential threat to both human and ecosystem health. Its toxicity is associated with metabolic activation and may involve mechanisms that adversely affect a wide variety of targets in an organism. Cylindrospermopsin has been shown to be cytotoxic, dermatotoxic, genotoxic, hepatotoxic in vivo, developmentally toxic, and may be carcinogenic. Human exposure may occur through drinking water, during recreational activities and by consuming foods in which the toxin may have bioaccumulated. Drinking water shortages of sufficient quality coupled with growing human pressures and climate variability and change necessitate an integrated and sustainable water management program. This review presents an overview of the importance of cylindrospermopsin, its detection, toxicity, worldwide distribution, and lastly, its chemical and biological degradation and removal by natural processes and drinking water treatment processes.

Environmental Science: Processes and Impacts↗
USGS2011

Source-water susceptibility assessment in Texas—Approach and methodology

Public water systems provide potable water for the public's use. The Safe Drinking Water Act amendments of 1996 required States to prepare a source-water susceptibility assessment (SWSA) for each public water system (PWS). States were required to determine the source of water for each PWS, the origin of any contaminant of concern (COC) monitored or to be monitored, and the susceptibility of the public water system to COC exposure, to protect public water supplies from contamination. In Texas, the Texas Commission on Environmental Quality (TCEQ) was responsible for preparing SWSAs for the more than 6,000 public water systems, representing more than 18,000 surface-water intakes or groundwater wells. The U.S. Geological Survey (USGS) worked in cooperation with TCEQ to develop the Source Water Assessment Program (SWAP) approach and methodology. Texas' SWAP meets all requirements of the Safe Drinking Water Act and ultimately provides the TCEQ with a comprehensive tool for protection of public water systems from contamination by up to 247 individual COCs. TCEQ staff identified both the list of contaminants to be assessed and contaminant threshold values (THR) to be applied. COCs were chosen because they were regulated contaminants, were expected to become regulated contaminants in the near future, or were unregulated but thought to represent long-term health concerns. THRs were based on maximum contaminant levels from U.S. Environmental Protection Agency (EPA)'s National Primary Drinking Water Regulations. For reporting purposes, COCs were grouped into seven contaminant groups: inorganic compounds, volatile organic compounds, synthetic organic compounds, radiochemicals, disinfection byproducts, microbial organisms, and physical properties. Expanding on the TCEQ's definition of susceptibility, subject-matter expert working groups formulated the SWSA approach based on assumptions that natural processes and human activities contribute COCs in quantities that vary in space and time; that increased levels of COC-producing activities within a source area may increase susceptibility to COC exposure; and that natural and manmade conditions within the source area may increase, decrease, or have no observable effect on susceptibility to COC exposure. Incorporating these assumptions, eight SWSA components were defined: identification, delineation, intrinsic susceptibility, point- and nonpoint-source susceptibility, contaminant occurrence, area-of-primary influence, and summary components. Spatial datasets were prepared to represent approximately 170 attributes or indicators used in the assessment process. These primarily were static datasets (approximately 46 gigabytes (GB) in size). Selected datasets such as PWS surface-water-intake or groundwater-well locations and potential source of contamination (PSOC) locations were updated weekly. Completed assessments were archived, and that database is approximately 10 GB in size. SWSA components currently (2011) are implemented in the Source Water Assessment Program-Decision Support System (SWAP-DSS) computer software, specifically developed to produce SWSAs. On execution of the software, the components work to identify the source of water for the well or intake, assess intrinsic susceptibility of the water- supply source, assess susceptibility to contamination with COCs from point and nonpoint sources, identify any previous detections of COCs from existing water-quality databases, and summarize the results. Each water-supply source's susceptibility is assessed, source results are weighted by source capacity (when a PWS has multiple sources), and results are combined into a single SWSA for the PWS.'SWSA reports are generated using the software; during 2003, more than 6,000 reports were provided to PWS operators and the public. The ability to produce detailed or summary reports for individual sources, and detailed or summary reports for a PWS, by COC or COC group was a unique capability of SWAP-DSS. In 2004, the TCEQ began a rotating schedule for SWSA wherein one-third of PWSs statewide would be assessed annually, or sooner if protection-program activities deemed it necessary, and that schedule has continued to the present. Cooperative efforts by the TCEQ and the USGS for SWAP software maintenance and enhancements ended in 2011 with the TCEQ assuming responsibility for all tasks.

Texas↗
USGS2018

Volcanic eruptions and threats to respiratory health

In early May 2018, Kīlauea volcano became increasingly active, posing an increase in threat to respiratory health. The emission of gases such as sulfur dioxide from Kīlauea produces large amounts of respirable acid particles as the gases react with water vapor and sunlight, resulting in a visible haze called “vog”. Additionally, the lava lake at Kīlauea’s summit crater has fallen, leading to explosions of “ash” that have reached as high up as 30,000 feet above sea level. Finally, lava entering the Pacific Ocean boils sea water to dryness, creating thick clouds of “laze” that is filled with hydrochloric acid and tiny shards of glass. Depending on your location and wind direction and speed, vog, ash, and laze can reach hazardous levels of air pollution that are toxic to humans. This fact sheet serves to inform you of potential adverse health effects following exposure to these airborne products of volcanic activity. This outdoor air quality issue is relevant to other locations worldwide at risk for volcanic activity.

American Journal of Respiratory and Critical Care ↗
USGS2025

Refining PAH and PCB bioavailability predictions in industrial sediments using source-fingerprinting, particle size, and bulk carbon, Puget Sound, Washington

Nearshore marine sediments in a Puget Sound, Washington industrial embayment had elevated levels of PAHs, PCBs and DDTs. Chemical fingerprints implicated nearshore sources including creosote, industrial oil and tar waste, and a landfill. Elevated concentrations were confined to an approximate 300-m shoreline buffer in the industrial waterfront, suggesting high site fidelity and limited along-shore or off-shore transport. Total PAH concentrations approximately doubled when including alkylated compounds. The industrial sediments often exceeded toxicity criteria; however, chemicals were likely less bioavailable than predicted, in part, due to assumed strong sorption to anthropogenic carbon like coal tar. Analyses of separated particle-size fractions showed that approximately half of PAHs were associated with particles greater than 500 μm, suggesting that a wide range of particle sizes are relevant to occurrence and transport. Predicted freely dissolved chemical concentrations in sediment pore water were unrealistically high using a bulk organic carbon sorption coefficient. When reduced to environmentally reasonable levels by applying a high-sorption partition coefficient applicable to contaminated sediments, predicted freely dissolved concentrations in some industrial sediments exceeded sublethal effect levels or surface water quality standards. Chemical assemblages predicted in the freely dissolved aqueous fraction, which is relevant for biotic uptake from water, shifted to predominantly low molecular weight as compared to sediment, highlighting the role of exposure pathways in bioavailability. Insights from chemical fingerprinting coupled with co-analysis of bulk carbon and grain size allowed refinement of bioavailability assessments of complex chemical mixtures in contaminated nearshore environments that are relevant for ecosystem health and restoration.

Washington↗
USGS2011

Distribution of Fecal Indicator Bacteria along the Malibu, California, Coastline

Each year, over 550 million people visit California's public beaches. To protect beach-goers from exposure to waterborne disease, California state law requires water-quality monitoring for fecal indicator bacteria (FIB), such as enterococci and Escherichia coli (E. coli), at beaches having more than 50,000 yearly visitors. FIB are used to assess the microbiological quality of water because, although not typically disease causing, they are correlated with the occurrence of certain waterborne diseases. Tests show that FIB concentrations occasionally exceed U.S. Environmental Protection Agency (USEPA) public health standards for recreational water in Malibu Lagoon and at several Malibu beaches (Regional Water Quality Control Board, 2009). Scientists from the U.S. Geological Survey's (USGS) California Water Science Center are doing a study to identify the distribution and sources of FIB in coastal Malibu waters (fig. 1). The study methods were similar to those used in a study of FIB contamination on beaches in the Santa Barbara, California, area (Izbicki and others, 2009). This report describes the study approach and presents preliminary results used to evaluate the distribution and source of FIB in the Malibu area. Results of this study will help decision-makers address human health issues associated with FIB contamination in Malibu, and the methods used in this study can be used in other coastal areas affected by FIB contamination.

Open-File Report↗
USGS1993

1993 Annual Report: San Francisco estuary regional monitoring program for trace substances

This first annual report of the San Francisco Estuary Regional Monitoring Program contains the results of monitoring measurements made in 1993. Measurements of conventional water quality parameters and trace contaminant concentrations were made at 16 stations throughout the Estuary three times during the year: the wet period (March), during declining Delta outflow (May), and during the dry period (September). Water toxicity tests were conducted at 8 of those stations. Measurements of sediment quality and contaminant concentrations were made at the same 16 stations during the wet and dry sampling periods. Sediment toxicity was measured at 8 of those stations. Transplanted, bagged bivalve bioaccumulation and condition was measured at 11 stations during the wet and dry sampling periods. Water Monitoring. Total or near-total (dissolved + particulate, see text) arsenic, cadmium, selenium, and dissolved (0.45 µm filtered) arsenic, cadmium, copper, nickel, silver, and zinc in water were highest in the South Bay. In general, dissolved metals in water were usually lowest in the Central Bay due to ocean influences. Near-total nickel and total mercury in water were highest in the northern estuary (San Pablo and Suisun Bays). Dissolved chromium and lead were highest at the Sacramento and San Joaquin River confluence stations. Six of the ten dissolved trace metals were highest in March during high runoff. Dissolved and total arsenic, selenium, and near-total cadmium were highest in September. Concentrations of trace organic contaminants are reported for the March sampling period. Total PAHs and PCBs were highest in the South Bay, but PCBs were also high in the Napa River. Dissolved PAHs were highest in the Central Bay, and dissolved PCBs were highest in the Napa River. Total and dissolved pesticides were highest in the Sacramento River and in the Extreme South Bay. Concentrations of trace elements in water (except selenium) were usually closely related with other environmental parameters. Total or near-total metals concentrations in water were most often associated with the amount of particulate material (TSS) in the water. Dissolved concentrations were usually associated with salinity or dissolved organic carbon (DOC) content. Dissolved PAHs were well correlated with TSS, but dissolved and total trace organic contaminants were poorly correlated with other water parameters. Based on deviations from conservative mixing of fresh and salt water, three different patterns of possible sources of metals were identified in 1993. For dissolved chromium and lead, rivers and local runoff appeared to be important sources. For dissolved arsenic, cadmium, copper, and nickel year-round inputs from the South Bay appeared to be important sources. Dissolved mercury, selenium, and zinc were associated with local runoff in the South Bay during the wet period. Dissolved silver did not fit any of these patterns. Although most contaminant concentrations were below water quality objectives, several trace contaminants were above the objectives at some stations. Comparisons to water quality objectives are used as a guide for evaluation of contaminant concentrations, but there are some differences in the way the RMP data are measured and that prescribed for regulatory purposes (see text). Concentrations of 5 metals in water were above EPA or Regional Basin Plan water quality objectives at six stations (see Table 30). Most of these elevated levels occurred at the northern estuary stations. Total PCB concentrations were above EPA human health objectives at all RMP stations. The pesticides chlordane, dieldrin, and DDTs were above the EPA objectives at several RMP stations, particularly at the northern-most, and river confluence stations. Although some of the contaminant concentrations were above water quality objectives, water toxicity tests (96 hour algal growth and 48 hour bivalve larval development tests) did not indicate toxicity (sometimes inconclusive) associated with the water samples collected at any of the RMP stations in 1993. Exposure to Bay San Francisco Estuary Regional Monitoring Program Regional Monitoring Program 1993 Report ii water actually enhanced algal growth at most stations. In addition to the Estuary-wide sampling, the Sacramento and San Joaquin Rivers were sampled upstream from their confluence. Stations in each river were sampled six times over a 6 week period of high flows. In the Sacramento River, seven of the ten dissolved metals measured had concentrations lower than those measured at the river confluence stations. Some metals concentrations in the San Joaquin River were higher, and some were lower than concentrations from the river confluence station. Metals concentrations in the Sacramento River were poorly related to river flow because the station at Rio Vista is under considerable tidal influence. In the San Joaquin River, flows were inversely related to 7 of 10 total metals concentrations. Sediment Monitoring. Concentrations of silver, mercury, and lead in sediment were highest in the South Bay. However, concentrations of most trace metals in sediments were highest in the northern estuary at stations with the finest (silt, clay) sediments. The northern estuary stations with the coarsest (sand, shell) sediments generally had the lowest metals concentrations. There were differences in concentrations of cadmium, lead, and selenium in sediments between the sampling periods, but no consistent trend as to which sampling period had higher values. In September, PAHs and PCBs in sediments were highest in the Central Bay, but pesticides in sediments were highest in the northern estuary and Extreme South Bay. NOAA’s Median Effects Ranges (ERM) for sediments were used as a guide for evaluation of sediment contaminant concentrations. Nickel was the only trace contaminant in sediment above the ERM guidelines, and it was high at all RMP stations. These high levels are probably due to natural, geologic sources. Although sediment contaminant concentrations were below ERMs, sediment toxicity tests (10 day amphipod mortality, and 48 hour bivalve larval development in elutriates) indicated toxicity at all stations tested. Sediment factors that could have caused the toxicity were not investigated. Bivalve Bioaccumulation. Mussels, oysters, and freshwater clams were transplanted to the RMP stations to evaluate bioaccumulation of trace substances. Trace metals were bioaccumulated at nearly all RMP stations. However, arsenic, lead, and mercury did not appear to bioaccumulate. There was generally more bioaccumulation during the dry season than during the wet season. In September, PAHs, PCBs, and pesticides accumulated in all samples. Bioaccumulation of PAHs and pesticides was generally highest at the river confluence stations, and the Napa River. PCBs accumulated most at Redwood Creek. There were substantial differences in the degree of bioaccumulation among the species. Oysters appeared to accumulate higher concentrations of trace metals than the other species, especially copper, which may be a natural phenomenon. There are no established tissue contaminant standards for trace metal and organic contaminants. Therefore, comparisons to Median International Standards (MIS) for human consumption, or U.S. Food and Drug Administration (USFDA) action levels for trace organics are used to evaluate the bioaccumulation results. Concentrations of selenium were higher than MIS guidelines at all stations during the wet season. Other trace metal concentrations were higher than MIS guidelines at various stations during one or the other sampling period. However, none of the bivalves contained concentrations above the USFDA or National Academy of Sciences (NAS) guidelines for trace organic contaminants. The transplanted bivalves survived well at all stations except in the Napa River where less than 35% survived during both sampling seasons. Measures of bivalve condition (dry weight, shell volume) indicated that bivalves deployed in the Central Bay grew significantly, but those at most other stations actually lost weight. Whether these differences were due to natural causes such as salinity or food supply, or to contamination, was not determined. Pilot Studies. Two pilot monitoring studies were conducted in 1993. A pilot study of Estuary hydrography and phytoplankton was conducted by scientists from the U.S. Summary Geological Survey in Menlo Park and U.C. Davis. Water column profiles at up to 37 stations were monitored along a transect of the Estuary run monthly between the South Bay and the Delta. The primary objective of this study was to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a) characteristics of Estuary water that may influence other chemical and biological reactions. A second objective was to investigate planktonic indicators of ecosystem structure and function. The data collected in 1993 showed the extent and duration of the spring phytoplankton bloom in the South Bay, other localized blooms in the northern estuary, the stratification and mixing associated with the entrapment zone in the northern estuary, and mixing in the Estuary resulting from the high rainfall in 1993. Knowledge of the duration and extent of these natural features of the Estuary provide context for interpretation of the RMP contaminant data collected only 3 times per year. Another pilot study of suspended sediment transport processes was conducted by the USGS in Sacramento. This study used continuous recording sensors at Point San Pablo and the Bay Bridge to measure the amount of suspended sediment in the water at mid-depth and near the bottom, as well as tide height. The objectives of this study were to estimate which factors determine suspended solids concentrations in the Central Bay and to collect time series of suspended solids that are appropriate for continuous monitoring of suspended solids and for calibration and validation of numerical models. The investigators determined that spring tides accounted for most of the variation in suspended solids concentrations at the stations monitored, not runoff from the Sacramento or San Joaquin Rivers, or semidiurnal and diurnal tides. Comparisons were also made between measurements made by the continuous recordings and the RMP samples collected during the regular monitoring cruises. The different ways of measuring TSS were generally comparable, however only 3 measurements per year as made by the RMP could not provide the information of TSS variation actually occurring in the Estuary. This information is important because as shown by the RMP data, total contaminant concentrations in Estuary water is largely dependent on the TSS in the water. This implies that the RMP measurements alone cannot determine accurately the range of contaminant concentrations without better characterizing the dynamics of TSS. The RMP Pilot Studies are important to the developing RMP because they will help put RMP measurements into the perspective of Estuary processes and mechanisms at other time scales. The studies can relate those processes to the RMP measurements and will facilitate revision of sampling design and interpretation. Summaries of other monitoring activities pertinent to regional monitoring are also included in the Report: a description of the Regional Board’s Bay Protection Studies, the Sacramento Coordinated Monitoring Program, and a wetlands monitoring plan are included.

California↗
USGS2014

Routine screening of harmful microorganisms in beach sands: implications to public health

Beaches worldwide provide recreational opportunities to hundreds of millions of people and serve as important components of coastal economies. Beach water is often monitored for microbiological quality to detect the presence of indicators of human sewage contamination so as to prevent public health outbreaks associated with water contact. However, growing evidence suggests that beach sand can harbor microbes harmful to human health, often in concentrations greater than the beach water. Currently, there are no standards for monitoring, sampling, analyzing, or managing beach sand quality. In addition to indicator microbes, growing evidence has identified pathogenic bacteria, viruses, and fungi in a variety of beach sands worldwide. The public health threat associated with these populations through direct and indirect contact is unknown because so little research has been conducted relating to health outcomes associated with sand quality. In this manuscript, we present the consensus findings of a workshop of experts convened in Lisbon, Portugal to discuss the current state of knowledge on beach sand microbiological quality and to develop suggestions for standardizing the evaluation of sand at coastal beaches. The expert group at the “Microareias 2012” workshop recommends that 1) beach sand should be screened for a variety of pathogens harmful to human health, and sand monitoring should then be initiated alongside regular water monitoring; 2) sampling and analysis protocols should be standardized to allow proper comparisons among beach locations; and 3) further studies are needed to estimate human health risk with exposure to contaminated beach sand. Much of the manuscript is focused on research specific to Portugal, but similar results have been found elsewhere, and the findings have worldwide implications.

Science of the Total Environment↗
USGS2021

Environmental and anthropogenic drivers of contaminants in agricultural watersheds with implications for land management

If not managed properly, modern agricultural practices can alter surface and groundwater quality and drinking water resources resulting in potential negative effects on aquatic and terrestrial ecosystems. Exposure to agriculturally derived contaminant mixtures has the potential to alter habitat quality and negatively affect fish and other aquatic organisms. Implementation of conservation practices focused on improving water quality continues to increase particularly in agricultural landscapes throughout the United States. The goal of this study was to determine the consequences of land management actions on the primary drivers of contaminant mixtures in five agricultural watersheds in the Chesapeake Bay, the largest watershed of the Atlantic Seaboard in North America where fish health issues have been documented for two decades. Surface water was collected and analyzed for 301 organic contaminants to determine the benefits of implemented best management practices (BMPs) designed to reduce nutrients and sediment to streams in also reducing contaminants in surface waters. Of the contaminants measured, herbicides (atrazine, metolachlor), phytoestrogens (formononetin, genistein, equol), cholesterol and total estrogenicity (indicator of estrogenic response) were detected frequently enough to statistically compare to seasonal flow effects, landscape variables and BMP intensity. Contaminant concentrations were often positively correlated with seasonal stream flow, although the magnitude of this effect varied by contaminant across seasons and sites. Land-use and other less utilized landscape variables including biosolids, manure and pesticide application and percent phytoestrogen producing crops were inversely related with site-average contaminant concentrations. Increased BMP intensity was negatively related to contaminant concentrations indicating potential co-benefits of BMPs for contaminant reduction in the studied watersheds. The information gained from this study will help prioritize ecologically relevant contaminant mixtures for monitoring and contributes to understanding the benefits of BMPs on improving surface water quality to better manage living resources in agricultural landscapes inside and outside the Chesapeake Bay watershed.

Delaware, Maryland, New Jersey, New York, Pennsylv↗
USGS2017

Methods used to characterize the chemical composition and biological activity of environmental waters throughout the United States, 2012-14

A vast array of chemical compounds are in wide commercial use in the United States, and the potential ecological and human-health effect of exposure to chemical mixtures has been identified as a high priority in environment health science. Awareness of the potential effects of low-level chemical exposures is rising. The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, conducted a study in which samples were collected from 38 streams in 25 States to provide an overview of contaminants found in stream water across the Nation. Additionally, biological screening assays were used to help determine any potential ecological and human-health effects of these chemical mixtures and to prioritize target chemicals for future toxicological studies. This report describes the site locations and the sampling and analytical methods and quality-assurance procedures used in the study.

Open-File Report↗