Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

Sedimentology of Permian upper part of the Minnelusa Formation, eastern Powder River Basin, Wyoming, and a comparison to the subsurface

Describes dolomite, gypsum, and sandstone units deposited in transgressive-regressive cycles. Three depositional cycles are partly exposed. The cycles observed in outcrop were informally labelled cycle 1, cycle 2, and cycle 3 in ascending stratigraphic order. West Mellott field represents a subsurface example of the facies and facies relationships observed in outcrop. The eolian-dune sandstone of the C cycle, which was partially reworked by the transgression of the B cycle, produces oil at West Mellott. The draping of dolomite and anhydrite of the B cycle on the eolian-dune sandstone of the C cycle is analogous to the draping gypsum on dune sand in cycle 2 in outcrop. -from Authors

Mountain Geologist↗

Gas in the Uinta Basin, Utah - Resources in continuous accumulations

Continuous-type gas plays can be envisioned as large areas within which the reservoir rock is everywhere charged with gas. As part of its 1995 National Assessment of oil and gas resources, the U.S. Geological Survey identified four continuous-type gas plays in the Uinta Basin. These occur in sandstone reservoirs of the lower Tertiary Wasatch Formation (two plays) and the underlying Upper Cretaceous Mesaverde Group (two plays). Only the play representing the eastern part of the Wasatch Formation continuous accumulation (Natural Buttes area) has been the target of appreciable drilling activity to date. The volume of undiscovered gas estimated to be recoverable from these four plays using existing technology and development practices ranges between 3.7 trillion cubic feet of gas (TCFG) (95th fractile) and 11.9 TCFG (5th fractile), and averages 7.0 TCFG. However, these are geologically based resource estimates, made without direct reference to economic viability. Economic analysis indicates that only a fraction of this assessed resource could be economically found and produced at prices less than $2.00 per thousand cubic feet of gas (MCFG), based on costs that prevailed at the beginning of 1993. Production characteristics of continuous-type gas plays vary significantly from well to well. Difficulty in identifying locations with poor production characteristics in advance of drilling contributes to the unfavorable economics of some plays. The need exists for improvements in technology and geologic understanding that increase the chances of selectively drilling the more productive locations within a continuous-type play.

Mountain Geologist↗

The Point Lookout Sandstone: a tale of two cores, or petrology, diagenesis, and reservoir properties of Point Lookout Sandstone, Southern Ute Indian Reservation, San Juan Basin, Colorado

The Point Lookout sandstones are quartz-rich, fine to very-fine grained, and contain moderately variable quantities of potassium feldspar (2 to 20 modal percent) and lithic fragments (9 to 20 modal percent). Locally, sandstone is tightly cemented by carbonate cement; clays are not important as cementing agents, although they significantly reduce permeability of some samples. Pores are small; many are intergranular micropores between crystals of authigenic clay. Depositional environments are highly variable and range from lower shoreface to coastal plain and include minor deltaic environments. The best reservoir characteristics are generally in the upper shoreface sandstones. -from Authors

Mountain Geologist↗

Provenance of the Tullock Member of the Fort Union Formation, Powder River Basin, Wyoming and Montana: evidence for early Paleocene Laramide uplift

A petrologic and provenance study indicates that Laramide uplifts to the west and south of the Powder River Basin (PRB) were emergent and shedding detritus by early Paleocene time. This conclusion is based largely on the presence of abundant first-cycle carbonate clasts in the northwestern PRB, and metamorphic and igneous clasts and labile heavy-mineral grains in the Tullock throughout the basin. The proximity and composition of the north end of the Bighorn uplift strongly suggest that it was the source for carbonate, igneous, and metamorphic rock fragments in northwestern Tullock outcrops. The conclusions are supported by recent fission-track, palynological, and sedimentological studies that indicate that Laramide-style foreland deformation in southwestern Montana began in late Cenomanian to Turonian time and migrated through central Wyoming to the Colorado Front Range by late Maastrichtian time. -from Authors

Mountain Geologist↗

A resource evaluation of the Bakken Formation (Upper Devonian and Lower Mississippian) continuous oil accumulation, Williston Basin, North Dakota and Montana

The Upper Devonian and Lower Mississippian Bakken Formation in the United States portion of the Williston Basin is both the source and the reservoir for a continuous oil accumulation - in effect a single very large field - underlying approximately 17,800 mi2 (46,100 km2) of North Dakota and Montana. Within this area, the Bakken Formation continuous oil accumulation is not significantly influenced by the water column and cannot be analyzed in terms of conventional, discrete fields. Rather, the continuous accumulation can be envisioned as a collection of oil-charged cells, virtually all of which are capable of producing some oil, but which vary significantly in their production characteristics. Better wellperformance statistics are linked regionally to higher levels of thermal maturity and to lower levels of reservoir heterogeneity. Although portions of the Bakken Formation continuous oil accumulation have reached a mature stage of development, the accumulation as a whole is far from depleted.

Mountain Geologist↗

Middle Jurassic incised valley fill (eolian/estuarine) and nearshore marine petroleum reservoirs, Powder River Basin

Paleovalleys incised into the Triassic Spearfish Formation (Chugwater equivalent) are filled with a vertical sequence of eolian, estuarine, and marine sandstones of the Middle Jurassic (Bathonian age) Canyon Springs Sandstone Member of the Sundance Formation. An outcrop exemplifying this is located at Red Canyon in the southern Black Hills, Fall River County, South Dakota. These paleovalleys locally have more than 300 ft of relief and are as much as several miles wide. Because they slope in a westerly direction, and Jurassic seas transgressed into the area from the west there was greater marine-influence and more stratigraphic complexity in the subsurface, to the west, as compared to the Black Hills outcrops. In the subsurface two distinctive reservoir sandstone beds within the Canyon Springs Sandstone Member fill the paleovalleys. These are the eolian lower Canyon Springs unit (LCS) and the estuarine upper Canyon Springs unit (UCS), separated by the marine "Limestone Marker" and estuarine "Brown Shale". The LCS and UCS contain significant proven hydrocarbon reservoirs in Wyoming (about 500 MMBO in-place in 9 fields, 188 MMBO produced through 1993) and are prospective in western South Dakota, western Nebraska and northern Colorado. Also prospective is the Callovian-age Hulett Sandstone Member which consists of multiple prograding shoreface to foreshore parasequences, as interpreted from the Red Canyon locality. Petrographic, outcrop and subsurface studies demonstrate the viability of both the Canyon Springs Sandstone and Hulett Sandstone members as superior hydrocarbon reservoirs in both stratigraphic and structural traps. Examples of fields with hydrocarbon production from the Canyon Springs in paleovalleys include Lance Creek field (56 MMBO produced) and the more recently discovered Red Bird field (300 MBO produced), both in Niobrara County, Wyoming. At Red Bird field the primary exploration target was the Pennsylvanian "Leo sands" of the Minnelusa Formation, and production from the Canyon Springs was not anticipated. Canyon Springs reservoirs are easily bypassed because they are relatively unconsolidated, underpressured, low-resistivity, and difficult to evaluate from petrophysics, drill-stem tests, or well cuttings.

Mountain Geologist↗

Stratigraphy and depositional environment of nonmarine facies of Frontier Formation, Eastern Pioneer Mountains, southwestern Montana

The Upper Cretaceous Frontier Formation in the eastern Pioneer Mountains of southwestern Montana was deposited in nonmarine environments west of the Western Interior Seaway within the Cordilleran foreland basin. These rocks have been assigned to the Frontier because they contain lithologies typical of the Frontier in the region even though they are entirely nonmarine and are thicker than the correlative marine Frontier to the east. The Frontier in the eastern Pioneer Mountains is underlain by the Vaughn Member of the Blackleaf Formation, but the upper part of the Frontier has been eroded and locally is overlain by rocks of Tertiary age. Geologic mapping was conducted and four sections were measured and described to determine facies, thickness variations, and depositional environments. In the eastern Pioneer Mountains study area, the Frontier ranges in thickness from about 1200 ft (366 m) in the south to more than 3400 ft (1036 m) in the north\. Frontier strata in the study area cannot be readily subdivided into mappable units, but two broadly-defined informal lithic units are described. The lower unit contains yellow-brown weathering siltstone, mudstone, and fine-grained quartz-rich sandstone, and is about 250 ft (76 m) thick. The upper unit is composed of yellow-brown to dark-gray siltstone and mudstone, quartz- and chert-rich sandstone, conglomeratic sandstone, and limestone, and is more than 2100 ft (640 m) thick in one measured section. The lower contact of the Frontier is placed at the top of a porcellanite bed that is associated with maroon mudstone and siltstone, limestone, and calcareous dark-gray shale in the underlying Vaughn Member of the Blackleaf Formation. The porcellanite bed directly overlies the highest maroon mudstone-siltstone bed of the upper Vaughn. The Frontier Formation in the eastern Pioneer Mountains was deposited on a broad delta plain dominated by fine-grained sediments. Sandstones exhibit characteristics of anastomosing fluvial channels, average 5% to 10% of the entire formation, and have width to depth ratios of less than 30. The Frontier in the eastern Pioneer Mountains is lithostratigraphically equivalent to the Frontier to the east in the Gravelly, Greenhorn, and Madison Ranges, but may include strata that are younger in age. Frontier strata to the south at Lima Peaks are the thickest in the region (up to 7000 ft; 2100 m) and include facies that are time-equivalent to the marine Frontier, the overlying Cody Shales, and the Telegraph Creek Formation of the Madison Range to the east. The Frontier in the eastern Pioneer Mountains is in part lithostratigraphically equivalent to the Coberly Formation in the Drummond, Montana area (50 mi [80 km] northwest of Butte, Montana) and the Marias River Shales near Great Falls (150 mi [240 km] northeast of Butte) in west-central Montana.

Mountain Geologist↗

Laramide structure of the central Sangre de Cristo Mountains and adjacent Raton Basin, southern Colorado

Laramide structure of the central Sangre de Cristo Mountains (Culebra Range) is interpreted as a system of west-dipping, basement-involved thrusts and reverse faults. The Culebra thrust is the dominant structure in the central part of the range; it dips 30 -55?? west and brings Precambrian metamorphic base-ment rocks over unmetamorphosed Paleozoic rocks. East of the Culebra thrust, thrusts and reverse faults break the basement and overlying cover rocks into north-trending fault blocks; these boundary faults probably dip 40-60?? westward. The orientation of fault slickensides indicates oblique (northeast) slip on the Culebra thrust and dip-slip (ranging from eastward to northward) movement on adjacent faults. In sedimentary cover rocks, east-vergent anticlines overlie and merge with thrusts and reverse faults; these anticlines are interpreted as fault-propagation folds. Minor east-dipping thrusts and reverse faults (backthrusts) occur in both the hanging walls and footwalls of thrusts. The easternmost faults and folds of the Culebra Range form a continuous structural boundary between the Laramide Sangre de Cristo highland and the Raton Basin. Boundary structures consist of west-dipping frontal thrusts flanked on the basinward side by poorly exposed, east-dipping backthrusts. The backthrusts are interpreted to overlie structural wedges that have been emplaced above blind thrusts in the basin margin. West-dipping frontal thrusts and blind thrusts are interpreted to involve basement, but backthrusts are rooted in basin-margin cover rocks. At shallow structural levels where erosion has not exposed a frontal thrust, the structural boundary of the basin is represented by an anticline or monocline. Based on both regional and local stratigraphic evidence, Laramide deformation in the Culebra Range and accompanying synorogenic sedimentation in the western Raton Basin probably took place from latest Cretaceous through early Eocene time. The earliest evidence of uplift and erosion of a highland is the appearance of abundant feldspar in the Late Cretaceous Vermejo Formation. Above the Vermejo, unconformities overlain by conglomerate indicate continued thrusting and erosion of highlands from late Cretaceous (Raton) through Eocene (Cuchara) time. Eocene alluvial-fan conglomerates in the Cuchara Formation may represent erosion of the Culebra thrust block. Deposition in the Raton Basin probably shifted north from New Mexico to southern Colorado from Paleocene to Eocene time as movement on individual thrusts depressed adjacent segments of the basin.

Mountain Geologist↗

Zircon geochronology of the Webb Canyon Gneiss and the Mount Owen Quartz Monzonite, Teton Range, Wyoming: Significance to dating late Archean metamorphism in the Wyoming craton

The Webb Canyon Gneiss is a strongly foliated and lineated orthogneiss intercalated with layered Archean gneisses in the northern part of the Teton Range in northwestern Wyoming. The Mount Owen Quartz Monzonite is a non-foliated or weakly flow foliated rock which forms a discordant pluton exposed in the central part of the range and that cuts the Webb Canyon Gneiss and the associated layered gneisses. U-Pb zircon geochronology reported here indicates that euhedral pink zircon grew in the Webb Canyon Gneiss at about 2680 Ma, probably during the peak of regional metamorphism and that the Mount Owen was emplaced at 2547??3 Ma. These dates provide the best constraints so far reported on the age of Late Archean regional metamorphism in the western part of the Wyoming craton.

Mountain Geologist↗

Prediction of gas production using well logs, Cretaceous of north-central Montana

Cretaceous gas sands underlie much of east-central Alberta and southern Saskatchewan, eastern Montana, western North Dakota, and parts of South Dakota and Wyoming. Estimates of recoverable biogenic methane from these rocks in the United States are as high as 91 TCF. In northern Montana, current production is localized around a few major structural features, while vast areas in between these structures are not being exploited. Although the potential for production exists, the lack of commercial development is due to three major factors: 1) the lack of pipeline infrastructure; 2) the lack of predictable and reliable rates of production; and 3) the difficulty in recognizing and selecting potentially productive gas-charged intervals. Unconventional (tight), continuous-type reservoirs, such as those in the Cretaceous of the northern Great Plains, are not well suited for conventional methods of formation evaluation. Pay zones frequently consist only of thinly laminated intervals of sandstone, silt, shale stringers, and disseminated clay. Potential producing intervals are commonly unrecognizable on well logs, and thus are overlooked. To aid in the identification and selection of potential producing intervals, a calibration system is developed here that empirically links the 'gas effect' to gas production. The calibration system combines the effects of porosity, water saturation, and clay content into a single 'gas-production index' (GPI) that relates the in-situ rock with production potential. The fundamental method for isolating the gas effect for calibration is a crossplot of neutron porosity minus density porosity vs gamma-ray intensity. Well-log and gas-production data used for this study consist of 242 perforated intervals from 53 gas-producing wells. Interval depths range from about 250 to 2400 ft. Gas volumes in the peak calendar year of production range from about 4 to 136 MMCF. Nine producing formations are represented. Producing-interval data show that porosity and gas production are closely linked to clay volume. Highest porosities and maximum gas production occur together at an intermediate clay content of about 12% (60 API). As clay volume exceeds 35% (130 API), minimum porosity required for production increases rapidly, and the number of potential producing intervals declines. Gas production from intervals where clay volume exceeds 50% is rare. Effective porosities of less than about 8% are probably inadequate for commercial gas production in these rocks regardless of clay content.

Mountain Geologist↗

Late Cenozoic regional collapse due to evaporite flow and Dissolution in the Carbondale Collapse Center, West-Central Colorado

Dissolution and flow of Pennsylvanian evaporitic rocks in west-central Colorado created the Carbondale Collapse Center, a 450 mi2 structural depression with about 4,000 ft of vertical collapse during the late Cenozoic. This paper describes evidence of collapse in the lower Roaring Fork River valley. Both the lateral extent and amount of vertical collapse is constrained by deformed upper Cenozoic volcanic rocks that have been correlated using field mapping, 40Ar/39Ar geochronology, geochemistry, and paleomagnetism. The Carbondale Collapse Center is one of at least two contiguous areas that have experienced major evaporite tectonism during the late Cenozoic. Historic sinkholes, deformed Holocene deposits, and modern high-salinity loads in the rivers and thermal springs indicate the collapse process continues today. Flow of evaporitic rocks is an important element in the collapse process, and during initial stages of collapse it was probably the primary causative mechanism. Dissolution, however, is the ultimate means by which evaporite is removed from the collapse area. As the Roaring Fork River began to rapidly down-cut through a broad volcanic plateau during the late Miocene, the underlying evaporite beds were subjected to differential overburden pressures. The evaporitic rocks flowed from beneath the upland areas where overburden pressures remained high, toward the Roaring Fork River Valley where the pressures were much lower. Along the valley the evaporitic rocks rose upward, sometimes as diapirs, forming or enhancing a valley anticline in bedrock and locally upwarping Pleistocene terraces. Wherever the evaporites encountered relatively fresh ground water, they were dissolved, forming underground voids into which overlying bedrock and surficial deposits subsided. The saline ground water eventually discharged to streams and rivers through thermal springs and by seepage into alluvial aquifers.

Mountain Geologist↗

Geochemical and mineralogical studies of dinosaur bone from the Morrison Formation at Dinosaur Ridge

The dinosaur bones first discovered in 1877 in the Upper Jurassic Morrison Formation at Morrison, Colorado were the first major find of dinosaur skeletons in the western U.S. and led to the recognition of four new dinosaur genera (Apatosaurus, Allosaurus, Diplodocus, and Stegosaurus). Eight articles dealing with these bones which appeared as research reports in the annual reports of the Friends of Dinosaur Ridge from 1990-1999 are condensed and summarized with some additional comments. Two of the articles are about the mineralogy and preservation of the bones; two are about the physical description of the bone occurrence; two are about the history of the site, and two are about use of novel instrumental methods (ground-penetrating radar and a directional scintillometer) to search for new bones.

Mountain Geologist↗

The Middle Jurassic Entrada Sandstone near Gallup, New Mexico

Near Gallup, New Mexico, the Middle Jurassic Entrada Sandstone consists of, in ascending order, the Iyanbito Member, the Rehoboth Member, and an upper sandstone member. The Rehoboth Member is named herein to replace the middle siltstone member, with a type section located 26 km east of Gallup. The Iyanbito Member has been erroneously equated with the Wingate Sandstone of northeast Arizona, and the Rehoboth Member has been miscorrelated with the Dewey Bridge Member of the Entrada in Utah. The Dewey Bridge is an older unit that does not extend into New Mexico. The Iyanbito Member, east of Gallup, overlies the J-2 unconformity and the eroded tops of the Owl Rock and Petrified Forest Members of the Chinle Formation. The Wingate Sandstone of the Lower Jurassic Glen Canyon Group overlies the J-0 unconformity and the underlying Rock Point Member (topmost unit) of the Chinle Formation in northeast Arizona. Both the Wingate Sandstone and the Rock Point Member are missing east of Gallup below the J-2 unconformity. Similarly, the Wingate is missing southwest of Gallup, near Lupton, Arizona, but the Rock Point Member is present and underlies the Iyanbito from Zuni northward to Toadlena, New Mexico. The Wingate and other formations of the Glen Canyon Group thin and wedge out southward and eastward in northeast Arizona. The J-2 unconformity truncates the Wingate Sandstone and the underlying J-0 unconformity, 5 km north of Toadlena.

Mountain Geologist↗

Subsurface fluid pressures from drill-stem tests, Uinta Basin, Utah

High fluid pressures are known to be associated with oil and gas fields in the Uinta Basin, Utah. Shut-in pressure measurements from drill-stem tests show how pressure varies with depth and by area within the basin. The data base used in this report incorporates over 2,000 pressure measurements from drill-stem tests in wells completed prior to 1985. However, the number of useful pressure measurements is considerably less, because many drill-stem tests fail to stabilize at the actual formation pressure if the permeability is low. By extracting the maximum pressure measurements recorded in a collection of wells within an area, the trend of formation pressure within that area can be approximated. Areal compilations of pressures from drill-stem tests show that overpressured rock formations occur throughout much of the northern and eastern areas of the Uinta Basin. In particular, significant overpressuring (0.5 < pressure gradient < 0.8 psi/ft) is found throughout much of the Altamont-Bluebell field at depths ranging from 10,000 to 13,000 ft, equivalent to 5,000 to 8,000 ft below sea level. Limited data indicate that the pressure gradient declines at depths greater than 13,000 ft. An underpressured zone appears to exist in the Altamont-Bluebell field at depths shallower than 5,000 ft. Throughout the eastern Uinta Basin, moderately overpressured zones (0.46 < pressure gradient < 0.5 psi/ft) are common, with local evidence of significantly overpressured zones, but pressure gradients greater than 0.6 psi/ft are rare.

Mountain Geologist↗

A review of the multiwell experiment in tight gas sandstones of the Mesaverde Group, Piceance Basin, Colorado

The Cretaceous Iles and Williams Fork Formations of the Mesaverde Group contain important reservoir and source rocks for basin-centered gas accumulations in the Piceance Basin of northwestern Colorado. The sandstones in these formations have very low permeability, so low that successful production of gas requires the presence of fractures. To increase gas production, the natural fracture system of these "tight gas sandstones" must be augmented by inducing artificial fractures, while minimizing the amount of formation damage due to introduced fluids. The Multiwell Experiment was undertaken to provide geological characterization, obtain physical property data, and perform stimulation experiments in the Iles and Williams Fork Formations. Three vertical wells and one follow-up slant well were drilled, logged, partially cored, tested for gas production, stimulated in various manners, and tested again. Drawing from published reports and papers, this review paper presents well log, core, and test data from the Multiwell Experiment while emphasizing the geological controls on gas production at the site. Gas production is controlled primarily by a set of regional fractures trending west-northwest. The fractures are vertical, terminating at lithologic boundaries within and at the upper and lower boundaries of sandstone beds. Fractures formed preferentially in sandstones where in situ stress and fracture gradients are lower than in shales and mudstones. The fractures cannot be identified adequately in vertical wellbores; horizontal wells are required. Because present-day maximum horizontal stress is aligned with the regional fractures, artificial fractures induced by pressuring the wellbore form parallel to the regional fractures rather than linking them, with consequent limitations upon enhancement of gas production.

Mountain Geologist↗

Characterization of petroleum reservoirs in the Eocene Green River Formation, Central Uinta Basin, Utah

The oil-productive Eocene Green River Formation in the central Uinta Basin of northeastern Utah is divided into five distinct intervals. In stratigraphically ascending order these are: 1) Uteland Butte, 2) Castle Peak, 3) Travis, 4) Monument Butte, and 5) Beluga. The reservoir in the Uteland Butte interval is mainly lacustrine limestone with rare bar sandstone beds, whereas the reservoirs in the other four intervals are mainly channel and lacustrine sandstone beds. The changing depositional environments of Paleocene-Eocene Lake Uinta controlled the characteristics of each interval and the reservoir rock contained within. The Uteland Butte consists of carbonate and rare, thin, shallow-lacustrine sandstone bars deposited during the initial rise of the lake. The Castle Peak interval was deposited during a time of numerous and rapid lake-level fluctuations, which developed a simple drainage pattern across the exposed shallow and gentle shelf with each fall and rise cycle. The Travis interval records a time of active tectonism that created a steeper slope and a pronounced shelf break where thick cut-and-fill valleys developed during lake-level falls and rises. The Monument Butte interval represents a return to a gentle, shallow shelf where channel deposits are stacked in a lowstand delta plain and amalgamated into the most extensive reservoir in the central Uinta Basin. The Beluga interval represents a time of major lake expansion with fewer, less pronounced lake-level falls, resulting in isolated single-storied channel and shallow-bar sandstone deposits.

Mountain Geologist↗

Vertical hydraulic conductivity measurements in the Denver Basin, Colorado

The Denver Basin is a structural basin on the eastern flank of the Rocky Mountain Front Range, Colorado, containing approximately 3000 ft of sediments that hold a critical groundwater resource supplying many thousands of households with water. Managing this groundwater resource requires understanding how water gets into and moves through water-bearing layers in a complex multiple-layered sedimentary sequence. The Denver Basin aquifer system consists of permeable sandstone interbedded with impermeable shale that has been subdivided into four principle aquifers named, in ascending order, the Laramie-Fox Hills, Arapahoe, Denver, and Dawson aquifers. Although shale can dominate the stratigraphic interval containing the aquifers, there is very little empirical data regarding the hydrogeologic properties of the shale layers that control groundwater flow in the basin. The amount of water that flows vertically within the basin is limited by the vertical hydraulic conductivity through the confining shale layers. Low vertical flow volumes translate to low natural recharge rates and can have a profound negative impact on long-term well yields and the economic viability of utilizing the resource. To date, direct measurements of vertical hydraulic conductivity from cores of fine-grained sediments have been published from only five locations; and the data span a wide range from 1??10-3 to 1??10-11 cm/sec. This range may be attributable, in part, to differences in sample handling and analytical methods; however, it may also reflect subtle differences in the lithologic characteristics of the fine-grained sediments such as grain-size, clay mineralogy, and compaction that relate to position in the basin. These limited data certainly call for the collection of additional data.

Mountain Geologist↗

Aquifers of the Denver Basin, Colorado

Development of the Denver Basin for water supply has been ongoing since the late 1800s. The Denver Basin aquifer system consists of the water-yielding strata of Tertiary and Cretaceous sedimentary rocks within four overlying formations. The four statutory aquifers contained in these formations are named the Dawson, Denver, Arapahoe, and Laramie-Fox Hills. For water rights administrative purposes, the outcrop/subcrop of the Laramie-Fox Hills aquifer defines the margins of the Basin. Initial estimates of the total recoverable groundwater reserves in storage, under this 6700-mi2 area, were 295 million acre-ft. Recent geologic evidence indicates that the aquifers are very heterogeneous and their composition varies significantly with distance from the source area of the sediments. As a result, available recoverable reserves may be one-third less than previously estimated. There is no legal protection for pressure levels in the aquifer, and water managers are becoming increasingly concerned about the rapid water level declines (30 ft/yr). Approximately 33,700 wells of record have been completed in the sedimentary rock aquifers of the Denver Basin for municipal, industrial, agricultural, and domestic uses.

Mountain Geologist↗