Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Pennsylvania Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2014

Calibration of a two-dimensional hydrodynamic model for parts of the Allegheny, Monongahela, and Ohio Rivers, Allegheny County, Pennsylvania

The U.S. Geological Survey (USGS), in cooperation with the Allegheny County Sanitary Authority, developed a validated two-dimensional Resource Management Associates2 (RMA2) hydrodynamic model of parts of the Allegheny, Monongahela, and Ohio Rivers (Three Rivers) to help assess the effects of combined sewer overflows (CSOs) and sanitary sewer overflows (SSOs) on the rivers. The hydrodynamic model was used to drive a water-quality model of the study area that was capable of simulating the transport and fate of fecal-indicator bacteria and chemical constituents under open-water conditions. The study area includes 14 tributary streams and parts of the Three Rivers where they enter and exit Allegheny County, an area of approximately 730 square miles (mi 2 ). The city of Pittsburgh is near the center of the county, where the Allegheny and Monongahela Rivers join to form the headwaters of the Ohio River. The Three Rivers are regulated by a series of fixed-crest dams, gated dams, and radial (tainter) gates and serve as the receiving waters for tributary streams, CSOs, and SSOs. The RMA2 model was separated into four individual segments on the basis of the U.S. Army Corps of Engineers navigational pools in the study area (Dashields; Emsworth; Allegheny River, Pool 2; and Braddock), which were calibrated individually using measured water-surface slope, velocity, and discharge during high- and low-flow conditions. The model calibration process included the comparison of water-surface elevations at five locations and velocity profiles at more than 80 cross sections in the study area. On the basis of the calibration and validation results that included water-surface elevations and velocities, the model is a representative simulation of the Three Rivers flow patterns for discharges ranging from 4,050 to 47,400 cubic feet per second (ft 3 /s) on the Allegheny River, 2,550 to 40,000 ft 3 /s on the Monongahela River, and 10,900 to 99,000 ft 3 /s on the Ohio River. The Monongahela River was characterized by unsteady conditions during low and high flows, which affected the calibration range. The simulated low-flow water-surface elevations typically were within 0.2 feet (ft) of measured values, whereas the simulated high-flow water-surface elevations were typically within 0.3 ft of the measured values. The mean error between simulated and measured velocities was less than 0.07 ft/s for low-flow conditions and less than 0.17 ft/s for high-flow conditions.

Pennsylvania↗
USGS2002

Hydrogeological investigation at Site 5, Willow Grove Naval Air Station/Joint Reserve Base, Horsham Township, Montgomery County, Pennsylvania

The U.S. Geological Survey conducted borehole geophysical logging, collected and analyzed water-level data, and sampled sections of a rock core to determine the concentration of volatile organic compounds in the aquifer matrix of the Stockton Formation. Borehole geophysical logs were run in three monitor wells. At well 05MW04I, the vertical gradient was upward at depths above 42 feet below land surface (ft bls), downward between 42 and 82 ft bls, and upward below 82 ft bls. At well 05MW05I, a downward vertical gradient was present. At well 05MW12I, the vertical gradient was downward above 112 ft bls and upward below 112 ft bls. Three water-bearing fractures in a 17-foot long rock core from 23.5 to 40.5 ft bls were identified and sampled. Three samples were analyzed from each water-bearing fracture—at the fracture face, 2 centimeters (cm) below the fracture, and 4 cm below the fracture. Fifteen compounds were detected; however, concentrations of seven compounds were less than 1 microgram per kilogram (mg/kg) when detected. Concentrations of benzene (from 0.39 to 3.3 mg/kg), 1,1-dichloroethene (1,1-DCE) (from 0.15 to 13 mg/kg), 1,1,1-trichloroethane (TCA) (from 0.17 to 22 mg/kg), and trichloroethylene (TCE) (from 0.092 to 9.6 mg/kg) were detected in all samples. The highest concentrations detected were for toluene, which was detected at a concentration of 32 and 86 mg/kg in the samples from unweathered sandstone at 2 and 4 cm below the fracture, respectively. Concentrations generally decreased with distance below the fracture in the mudstone samples. Concentrations of benzene and toluene increased with distance below the fractures in the unweathered sandstone samples. Concentrations of 1,1-DCE, TCA, and TCE were higher in the mudstone samples than in the samples from sandstone. Toluene concentrations were higher in unweathered sandstone than in weathered sandstone or mudstone. The effect of the pumping of Horsham Water and Sewer Authority public supply well 26 (HWSA-26), 0.2 mile southwest of the base boundary, on groundwater levels on the base was determined by shutting the well down for 6 days to allow water levels to recover. Water levels in 22 nearby wells were measured. The only well (02MW01I) that showed an unambiguous response to the shutdown of well HWSA-26 is 1,350 feet directly along strike from well HWSA-26. The recovery of well 05MW11I in response to the shutdown of well HWSA-26 is masked by recharge from snowmelt but probably does not exceed about 0.2 feet on the basis of the water level in well 05MW11I, which showed a response to the pumping of well HWSA-26 that ranged from 0.5 to 0.15 foot. Horizontal gradients differ with depth, and the rate and direction of ground-water flow and contaminant movement is depth dependent. The potentiometric-surface map for water levels measured in wells screened between 5 and 44 ft bls in the aquifer shows a ground-water mound that is the high point on a regional ground-water divide. From this divide, ground water flows both northwest toward Park Creek and southeast toward Pennypack Creek. The hydraulic gradient around this mound is relatively flat to the southeast and particularly flat to the northwest. The potentiometric-surface map for water levels measured in wells screened between 40 and 100 ft bls in the aquifer shows a very flat hydraulic gradient. Differences in the elevation of the potentiometric surface are less than 2 feet. The potentiometric-surface map for water levels measured in wells screened between 105 and 179 ft bls in the aquifer shows a steep hydraulic gradient between Sites 5 and 2 and a relatively flat hydraulic gradient between Sites 5 and 3. Water levels measured on October 7, 1999, showed downward vertical head gradients for all well clusters at Site 5. Vertical gradients ranged from 0.01 at well cluster 05MW10 to 0.2 at cluster 05MW11. Most gradients were between 0.01 and 0.026. Vertical head gradients vary with time. The variability is caused by a difference in the magnitude of water-level fluctuations between shallow and the deep fractures. The difference in the magnitude of water-level fluctuations is because of differences in lithology and aquifer storativity.

Pennsylvania↗
USGS1996

Hydrogeology of, and simulation of ground-water flow in, a mantled carbonate-rock system, Cumberland Valley, Pennsylvania

The U.S. Geological Survey conducted a study in a highly productive and complex regolith-mantled carbonate valley in the northeastern part of the Cumberland Valley, Pa., as part of its Appalachian Valleys and Piedmont Regional Aquifer-system Analysis program. The study was designed to quantify the hydrogeologic characteristics and understand the ground-water flow system of a highly productive and complex thickly mantled carbonate valley. The Cumberland Valley is characterized by complexly folded and faulted carbonate bedrock in the valley bottom, by shale and graywacke to the north, and by red-sedimentary and diabase rocks in the east-southeast. Near the southern valley hillslope, the carbonate rock is overlain by wedge-shaped deposit of regolith, up to 450 feet thick, that is composed of residual material, alluvium, and colluvium. Locally, saturated regolith is greater than 200 feet thick. Seepage-run data indicate that stream reaches, near valley walls, are losing water from the stream, through the regolith, to the ground-water system. Results of hydrograph-separation analyses indicate that base flow in stream basins dominated by regolith-mantled carbonate rock, carbonate rock, and carbonate rock and shale are 81.6, 93.0, and 67.7 percent of total streamflow, respectively. The relative high percentage for the regolith-mantled carbonate-rock basin indicates that the regolith stores precipitation and slowly, steadily releases this water to the carbonate-rock aquifer and to streams as base flow. Anomalies in water-table gradients and configuration are a result of topography and differences in the character and distribution of overburden material, permeability, rock type, and geologic structure. Most ground-water flow is local, and ground water discharges to nearby springs and streams. Regional flow is northeastward to the Susquehanna River. Average-annual water budgets were calculated for the period of record from two continuous streamflow-gaging stations. Average-annual precipitation range from 39.0 to 40.5 inches, and averages about 40 inches for the model area. Average-annual recharge, which was assumed equal to the average-annual base flow, ranged from 12 inches for the Conodoguinet Creek, and 15 inches for the Yellow Breeches Creek. The thickly-mantled carbonate system was modeled as a three- dimensional water-table aquifer. Recharge to, ground-water flow through, and discharge from the Cumberland Valley were simulated. The model was calibrated for steady-state conditions using average recharge and discharge data. Aquifer horizontal hydraulic conductivity was calculated from specific-capacity data for each geologic unit in the area. Particle-tracking analyses indicate that interbasin and intrabasin flows of groundwater occur within the Yellow Breeches Creek Basin and between the Yellow Breeches and Conodoguinet Creek Basins.

Pennsylvania↗
USGS2014

Baseline groundwater quality from 34 wells in Wayne County, Pennsylvania, 2011 and 2013

Wayne County, Pennsylvania, is underlain by the Marcellus Shale, which currently (2014) is being developed elsewhere in Pennsylvania for natural gas. All residents of largely rural Wayne County rely on groundwater for water supply, primarily from bedrock aquifers (shales and sandstones). This study, conducted by the U.S. Geological Survey in cooperation with the Pennsylvania Department of Conservation and Natural Resources, Bureau of Topographic and Geologic Survey (Pennsylvania Geological Survey), provides a groundwater-quality baseline for Wayne County prior to development of the natural gas resource in the Marcellus Shale. Selected wells completed in the Devonian-age Catskill Formation, undifferentiated; the Poplar Gap and Packerton Members of the Catskill Formation, undivided; and the Long Run and Walcksville Members of the Catskill Formation, undivided, were sampled. Water samples were collected once from 34 domestic wells during August 2011 and August and September 2013 and analyzed to characterize their physical and chemical quality. Samples were analyzed for 45 constituents and properties, including nutrients, major ions, metals and trace elements, radioactivity, and dissolved gases, including methane and radon-222. The quality of the sampled groundwater was generally within U.S. Environmental Protection Agency (USEPA) drinking-water standards, although in some samples, the concentrations of a few constituents exceeded USEPA drinking-water standards and health advisories. The pH of water samples ranged from 5.5 to 9.3 with a median of 7.0. The pH was outside the USEPA secondary maximum contaminant level (SMCL) range of 6.5 to 8.5 in water samples from 14 of the 34 wells (41 percent). Eleven samples had a pH less than 6.5, and three samples had a pH greater than 8.5. Dissolved oxygen concentrations ranged from 0.2 to 11.5 milligrams per liter (mg/L) with a median of 4.7 mg/L. The dissolved oxygen concentration was less than 1 mg/L in water samples from 6 wells; 5 of these 6 water samples had a pH greater than 7.7. Concentrations of dissolved methane ranged from less than 0.00006 to 3.3 mg/L. Methane was detectable in 22 of the 34 wells sampled (65 percent). Methane concentrations were greatest in the 5 samples with pH of 7.8 or higher, ranging from 0.040 to 3.3 mg/L. These samples also had among the lowest concentrations of dissolved oxygen. Three water samples, which had sufficient dissolved methane concentrations (greater than 0.9 mg/L), were analyzed for isotopes of carbon and hydrogen in the methane. The isotopic ratio values fell within (two samples) or close to (one sample) the range for a thermogenic natural gas source. The total dissolved solids concentration ranged from 33 to 346 mg/L; the median concentration was 126 mg/L. Sodium concentrations ranged from 1.07 to 116 mg/L; the median concentration was 9.42 mg/L. The sodium concentration exceeded the USEPA health advisory for sodium of 20 mg/L in water samples from 7 of the 34 wells (21 percent). Concentrations of dissolved arsenic ranged from less than 0.06 to 21.8 micrograms per liter (µg/L); the median concentration was 0.59 µg/L. Water samples from 2 of the 34 wells (6 percent) exceeded the USEPA maximum contaminant level (MCL) of 10 µg/L for arsenic. Concentrations of dissolved manganese ranged from less than 0.15 to 61.5 µg/L; the median concentration was 0.42 µg/L. A water sample from 1 of the 34 wells (3 percent) exceeded the USEPA SMCL of 50 µg/L for manganese; the concentration was less than the USEPA lifetime health advisory of 300 µg/L for manganese. Activities of radon-222 in water from the 34 sampled wells ranged from 110 to 7,180 picocuries per liter (pCi/L); the median activity was 2,105 pCi/L. Water samples from 33 of the 34 wells (97 percent) exceeded the proposed USEPA MCL of 300 pCi/L, and 4 water samples (12 percent) exceeded the USEPA proposed alternative MCL of 4,000 pCi/L for radon-222. Differences in groundwater chemistry were related to pH. Water with a pH greater than 7.6 generally had low dissolved oxygen concentrations, indicating reducing conditions in the aquifer. These high pH waters also had relatively elevated concentrations of methane, arsenic, boron, bromide, fluoride, lithium, and sodium but low concentrations of copper, nickel, and zinc. Water samples with a pH greater than 7.8 had methane concentrations equal to or greater than 0.04 mg/L.

Pennsylvania↗
USGS2018

Preliminary geologic framework developed for a proposed environmental monitoring study of a deep, unconventional Marcellus Shale drill site, Washington County, Pennsylvania

Background In the fall of 2011, the U.S. Geological Survey (USGS) was afforded an opportunity to participate in an environmental monitoring study of the potential impacts of a deep, unconventional Marcellus Shale hydraulic fracturing site. The drill site of the prospective case study is the “Range Resources MCC Partners L.P. Units 1-5H” location (also referred to as the “RR–MCC” drill site), located in Washington County, southwestern Pennsylvania. Specifically, the USGS was approached to provide a geologic framework that would (1) provide geologic parameters for the proposed area of a localized groundwater circulation model, and (2) provide potential information for the siting of both shallow and deep groundwater monitoring wells located near the drill pad and the deviated drill legs. The lead organization of the prospective case study of the RR–MCC drill site was the Groundwater and Ecosystems Restoration Division (GWERD) of the U.S. Environmental Protection Agency. Aside from the USGS, additional partners/participants were to include the Department of Energy, the Pennsylvania Geological Survey, the Pennsylvania Department of Environmental Protection, and the developer Range Resources LLC. During the initial cooperative phase, GWERD, with input from the participating agencies, drafted a Quality Assurance Project Plan (QAPP) that proposed much of the objectives, tasks, sampling and analytical procedures, and documentation of results. Later in 2012, the proposed cooperative agreement between the aforementioned partners and the associated land owners for a monitoring program at the drill site was not executed. Therefore, the prospective case study of the RR–MCC site was terminated and no installation of groundwater monitoring wells nor the collection of nearby soil, stream sediment, and surface-water samples were made. Prior to the completion of the QAPP and termination of the perspective case study the geologic framework was rapidly conducted and nearly completed. This was done for three principal reasons. First, there was an immediate need to know the distribution of the relatively undisturbed surface to near-surface bedrock geology and unconsolidated materials for the collection of baseline surface data prior to drill site development (drill pad access road, drill pad leveling) and later during monitoring associated with well drilling, well development, and well production. Second, it was necessary to know the bedrock geology to support the siting of: (1) multiple shallow groundwater monitoring wells (possibly as many as four) surrounding and located immediately adjacent to the drill pad, and (2) deep groundwater monitoring wells (possibly two) located at distance from the drill pad with one possibly being sited along one of the deviated production drill legs. Lastly, the framework geology would provide the lateral extent, thickness, lithology, and expected discontinuities of geologic units (to be parsed or grouped as hydrostratigraphic units) and regional structure trends as inputs into the groundwater model. This report provides the methodology of geologic data accumulation and aggregation, and its integration into a geographic information system (GIS) based program. The GIS program will allow multiple data to be exported in various formats (shapefiles [.shp], database files [.dbf], and Keyhole Markup Language files [.KML]) for use in surface and subsurface geologic site characterization, for sampling strategies, and for inputs for groundwater modeling.

Pennsylvania↗
USGS2006

Physical and vegetative characteristics of a relocated stream reach, constructed wetland, and riparian buffer, Upper Saucon Township, Lehigh County, Pennsylvania, 2000-04

The U.S. Geological Survey, in cooperation with the Pennsylvania Department of Transportation, Engineering District 5-0, investigated physical and vegetative changes within a relocated stream reach, constructed wetland, and riparian buffer from September 2000 to October 2004. This report presents an evaluation of data collected using methods from multiple sources that have been adapted into a consistent approach. This approach is intended to satisfy a need for consistent collection of different types of data with the goal of transferring technology and findings to similar projects. Survey data indicate that adjustment of the upstream part of the relocated stream reach slowed over the monitoring period, but the downstream channel remains unstable as evidenced by excessive deposition. Upstream migration of a nick point has slowed or stopped altogether as of the 2003 assessment when this feature came in contact with the upstream-most part of the channel that is lined with riprap. Documented streambed erosion in the upstream cross sections, along with deposition downstream, has resulted in an overall decrease in slope of the stream channel over the monitoring period. Most streambed erosion took place prior to the 2002 assessment when annual mean streamflows were less than those in the final 2 years of monitoring. An abundance of fine sediment dominates the substrate of the relocated channel. Annual fluctuations of large particles within each cross section demonstrates the capacity of the relocated channel to transport the entire range of sediment. The substrate within the 0.28-acre constructed wetland (a mixture of soil from an off-site naturally occurring wetland and woodchips) supported a hydrophytic-vegetation community throughout the investigation. Eleocharis obtusa (spike rush), an obligate-wetland herb, was the most prevalent species, having a maximum areal cover of 90 percent in fall 2001 and a minimum of 23 percent in fall 2004. Drought-like conditions in water year 2002 (cumulative precipitation was 28.11 inches) allowed species like Panicum dichotomiflorum (witch grass), Salix sp. (willow), Leersia oryzoides (rice cutgrass), and Echinocloa crusgalli (barnyard grass) to become established by fall 2002. Above-average precipitation in water years 2003 and 2004 (58.55 and 53.17 inches, respectively) coincided with increased areal cover by E. obtusa in fall 2003 (56 percent) and decreased areal cover in fall 2004 (23 percent). Pond-like conditions that probably persisted throughout the 2004 growing season favored aquatic species like Alisma subcordatum (water plantain) to the detriment of many emergent species, including E. obtusa. Despite the pond-like conditions, L. oryzoides, an obligate-wetland grass, increased in areal cover (from 12 to 34 percent) between the 2003 and 2004 growing seasons because it was established in the higher elevations and the peripheral areas of the constructed wetland that were less prone to persistent inundation. Canopy development by trees and shrubs in the riparian buffer was initially (fall 2000) poor (39.7 percent), resulting in more available sunlight for the herbaceous understory than in any other growing season. As a result, areal cover of herbaceous species and trees and shrubs less than 1-meter tall was 108 percent in fall 2000 with Lolium perenne (perennial rye), Polygonum persicaria (lady's thumb), and Setaria faberi (foxtail) collectively contributing nearly half the cover (59.2 percent). Because of increases in canopy cover by trees and shrubs (39.7 percent in fall 2000 to 127 percent in fall 2004), herbaceous cover decreased to 76 percent by the fall of 2001 and varied between 72 and 77 percent for the rest of the study period. Tree density in the riparian buffer ranged from 3,078 and 4,130 plants per acre (fall 2000 and 2003, respectively) over the study period but essentially remained constant after fall 2001; computations reported each fall between fall 2001 and fall 2004 are within 10 percent of one another. When the study ended in fall 2004, Acer negundo (box elder) and Fraxinus pennsylvanica (green ash) were the most populous tree species (1,526 and 1,084 plants per acre, respectively) followed by Quercus bicolor (swamp white oak; 720 plants per acre). A. negundo , F. pennsylvanica , and Q. bicolor also contributed the greatest areal cover in fall 2004 (31.2, 24.0, and 18.5 percent,respectively).

Pennsylvania↗
USGS1961

Drainage basins, channels, and flow characteristics of selected streams in central Pennsylvania

The hydraulic, basin, and geologic characteristics of 16 selected streams in central Pennsylvania were measured for the purpose of studying the relations among these general characteristics and their process of development. The basic parameters which were measured include bankfull width and depth, channel slope, bed material size and shape, length of stream from drainage divide, and size of drainage area. The kinds of bedrock over which the streams flow were noted. In these streams the bankfull channel is filled by flows approximating the 2.3-year flood. By measuring the breadth and mean depth of the channel, it was possible to compute the bankfull mean velocity for each of the 119 sampling stations. These data were then used to compute the downstream changes in hydraulic geometry of the streams studied. This method has been called an indirect computation of the hydraulic geometry. The results obtained by the indirect method are similar to those of the direct method of other workers. The basins were studied by examining the relations of drainage area, discharge, and length of stream from drainage divide. For the streams investigated, excellent correlations were found to exist between drainage area and the 2.3-year flood, as well as between length of stream from the basin divide and drainage area. From these correlations it is possible to predict the discharge for the 2.3-year flood at any arbitrary point along the length of the stream. The long, intermediate, and short axes of pebbles sampled from the bed of the stream were recorded to study both size and sphericity changes along individual streams and among the streams studied. No systematic downstream changes in sphericity were found. Particle size changes are erratic and show no consistent relation to channel slope. Particle size decreases downstream in many streams but remains constant or increases in others. Addition of material by tributaries is one factor affecting particle size and another is the parent material. Wear does not appear to account for some of the changes noted in particle size in a downstream direction. Comparison with laboratory studies indicates that at least in some streams the downstream decrease in size is much greater than would be expected from wear alone. The type of bedrock underlying the channels included in this study appears to affect both channel slope and particle size. For a given length of stream, a stream channel underlain by sandstone tends to have a steeper slope and larger bed material than channels underlain by shale or limestone. Hence, a stream which heads in sandstone and ends in limestone tends to have a more rapid decrease in slope and particle size than a stream heading in limestone and ending in sandstone. The association of steep slopes and small particles for limestone channels implies that slope and particle size may show a vague correlation between lithologic groups although no correlation may exist within a given lithologic type. In addition to the effect of bedrock on slope and particle size, there is some evidence that channels in limestone or dolomite have a slightly smaller cross section at bankfull stage than channels in shale or sandstone. Near the headwaters of many of these streams, a deposit of periglacial rubble affects the slope and bed material size. Some of the debris contains residual boulders which are too large to be moved by ordinary floods and, therefore, impose larger particle sizes in the bed of the stream. The addition of this very coarse debris to the bed material is another example of the influence of geologic factors on stream channels even though the channel consists of unconsolidated debris instead of bedrock. The influence of geologic factors noted in selected streams in central Pennsylvania may not be directly applicable to areas other than the Appalachian Mountains, but the general process is no doubt similar in most areas. In large alluvial valleys bedrock cannot be much of an influencing factor; yet large, thick alluvial deposits and terraces are in a sense "bedrock" materials upon which the stream works to form the landscape.

Pennsylvania↗
USGS1953

Geology of anthracite in the western part of the Ashland quadrangle, Pennsylvania

The Western Middle anthracite field is one of four structural basins containing anthracite in eastern Pennsylvania. This report describes the geology of the part of the Western Middle field that lies in the western half of the Ashland quadrangle. (See index map, sheet 2.) The mapped area covers about 19 square miles in Columbia and Schuylkill Counties. The town of Centralia is in the northern part of the area, and the town of Ashland is in the southern part.

Pennsylvania↗