SEARCH · Geology Reports

Results for “Nuclear Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

USGS2013

Methods for estimating water consumption for thermoelectric power plants in the United States

Water consumption at thermoelectric power plants represents a small but substantial share of total water consumption in the U.S. However, currently available thermoelectric water consumption data are inconsistent and incomplete, and coefficients used to estimate consumption are contradictory. The U.S. Geological Survey (USGS) has resumed the estimation of thermoelectric water consumption, last done in 1995, based on the use of linked heat and water budgets to complement reported water consumption. This report presents the methods used to estimate freshwater consumption at a study set of 1,284 power plants based on 2010 plant characteristics and operations data. Power plants were categorized for estimation of water consumption in two tiers. First, generating units were assigned to categories based on the technology used to generate electricity. These generation-type categories are combustion steam, combined-cycle, nuclear, geothermal, and solar thermal. Second, cooling systems were separately categorized as either wet cooling towers or surface-water cooling systems, and the surface-water cooling systems were subcategorized as cooling ponds, lakes, and rivers. Heat budgets were constructed for the first four generation-type categories; data at solar thermal plants were insufficient for heat budgets. These heat budgets yielded estimates of the amount of heat transferred to the condenser. The ratio of evaporation to the heat discharged through the condenser was estimated using existing heat balance models that are sensitive to environmental data; this feature allows estimation of consumption under different climatic conditions. These two estimates were multiplied to yield an estimate of consumption at each power plant.

Scientific Investigations Report↗

USGS2026

Uranium—Deposits, production and resources, market dynamics, and supply chain risks

Introduction Interest in nuclear power for the generation of electricity has risen with the increase in the need for more diverse baseload power, enhanced energy security, and the development of new technologies, such as small modular reactors (SMRs), which could provide power for remote areas, industrial applications, and artificial intelligence (AI) data centers. In 2024, the U.S. Department of Energy received $2.7 billion in congressional funding to bolster the domestic uranium production and nuclear fuel supply chain and address reliance on imports from foreign suppliers. In 2025, the U.S. Government issued several Executive and Secretary’s orders aimed at revitalizing the U.S. nuclear sector. If SMRs are to be as widely deployed in the United States and worldwide as envisioned, demand for uranium (nuclear reactor fuel) will likely increase. After the Fukushima nuclear accident in 2011, the market spot price of uranium began a decline, followed by a decrease in U.S. and global uranium exploration and mine development expenditures that led to a uranium supply deficit until 2020, when prices started to recover, prompting a resurgence in uranium exploration and development. In January of 2024, the uranium spot price rose to a 17-year high $106 (U.S. dollars) per pound of U3O8 (triuranium oxide, commonly known as “yellowcake”), which is expected to increase uranium exploration, mine development, and uranium production domestically and worldwide.

Fact Sheet↗

USGS1983

Disposal of high-level nuclear waste above the water table in arid regions

Locating a repository in the unsaturated zone of arid regions eliminates or simplifies many of the technological problems involved in designing a repository for operation below the water table and predicting its performance. It also offers possible accessibility and ease of monitoring throughout the operational period and possible retrieval of waste long after. The risks inherent in such a repository appear to be no greater than in one located in the saturated zone; in fact, many aspects of such a repository's performance will be much easier to predict and the uncertainties will be reduced correspondingly. A major new concern would be whether future climatic changes could produce significant consequences due to possible rise of the water table or increased flux of water through the repository. If spent fuel were used as a waste form, a second new concern would be the rates of escape of gaseous iodine-129 and carbon-14 to the atmosphere.

Circular↗

USGS1996

Joint US Geological Survey, US Nuclear Regulatory Commission workshop on research related to low-level radioactive waste disposal, May 4-6, 1993, National Center, Reston, Virginia; Proceedings

This report contains papers presented at the "Joint U.S. Geological Survey (USGS) and U.S. Nuclear Regulatory Commission (NRC) Technical Workshop on Research Related to Low-Level Radioactive Waste (LLW) Disposal" that was held at the USGS National Center Auditorium, Reston, Virginia, May 4-6, 1993. The objective of the workshop was to provide a forum for exchange of information, ideas, and technology in the geosciences dealing with LLW disposal. This workshop was the first joint activity under the Memorandum of Understanding between the USGS and NRC's Office of Nuclear Regulatory Research signed in April 1992. Participants included invited speakers from the USGS, NRC technical contractors (U.S. Department of Energy (DOE) National Laboratories and universities) and NRC staff for presentation of research study results related to LLW disposal. Also in attendance were scientists from the DOE, DOE National Laboratories, the U.S. Environmental Protection Agency, State developmental and regulatory agencies involved in LLW disposal facility siting and licensing, Atomic Energy Canada Limited (AECL), private industry, Agricultural Research Service, universities, USGS and NRC.

Water-Resources Investigations Report↗

USGS2017

Beryllium

Beryllium is a mineral commodity that is used in a variety of industries to make products that are essential for the smooth functioning of a modern society. Two minerals, bertrandite (which is supplied domestically) and beryl (which is currently supplied solely by imports), are necessary to ensure a stable supply of high-purity beryllium metal, alloys, and metal-matrix composites and beryllium oxide ceramics. Although bertrandite is the source mineral for more than 90 percent of the beryllium produced globally, industrial beryl is critical for the production of the very high purity beryllium metal needed for some strategic applications. The current sole domestic source of beryllium is bertrandite ore from the Spor Mountain deposit in Utah; beryl is imported mainly from Brazil, China, Madagascar, Mozambique, and Portugal. High-purity beryllium metal is classified as a strategic and critical material by the Strategic Materials Protection Board of the U.S. Department of Defense because it is used in products that are vital to national security. Beryllium is maintained in the U.S. stockpile of strategic materials in the form of hot-pressed beryllium metal powder. Because of its unique chemical properties, beryllium is indispensable for many important industrial products used in the aerospace, computer, defense, medical, nuclear, and telecommunications industries. For example, high-performance alloys of beryllium are used in many specialized, high-technology electronics applications, as they are energy efficient and can be used to fabricate miniaturized components. Beryllium-copper alloys are used as contacts and connectors, switches, relays, and shielding for everything from cell phones to thermostats, and beryllium-nickel alloys excel in producing wear-resistant and shape-retaining high-temperature springs. Beryllium metal composites, which combine the fabrication ability of aluminum with the thermal conductivity and highly elastic modulus of beryllium, are ideal for producing aircraft and satellite structural components that have a high stiffness-to-weight ratio and low surface vibration. Beryllium oxide ceramics are used in a wide range of applications, including missile guidance systems, radar applications, and cell phone transmitters, and they are critical to medical technologies, such as magnetic resonance imaging (MRI) machines, medical lasers, and portable defibrillators. The United States is expected to remain self-sufficient with respect to most of its beryllium requirements, based on information available at the time this chapter was prepared (2013). The United States is one of only three countries that currently process beryllium ores and concentrate them into beryllium products, and these three countries supply most of the rest of the world with these products. Exploration for new deposits in the United States is limited because domestic beryllium production is dominated by a single producer that effectively controls the domestic beryllium market, which is relatively small and specialized, and the market cannot readily accommodate new competition on the raw material supply side.

Professional Paper↗

USGS2022

Comprehensive pressure core analysis for hydrate-bearing sediments from Gulf of Mexico Green Canyon Block 955, including assessments of geomechanical viscous behavior and nuclear magnetic resonance permeability

Quantifying the petrophysical and geomechanical properties of gas hydrate reservoirs is essential for understanding the natural hydrate system and predicting gas production behavior for future resource development. Pressure-core analysis tools were used to characterize methane hydrate–bearing sediments recovered from the Gulf of Mexico Green Canyon Block 955, under an international collaboration with The University of Texas and the National Institute of Advanced Industrial Science and Technology. Pressure-core samples were successfully transferred from Austin, Texas to Sapporo, Japan. Index property measurements (grain size, grain density, hydration number, gas composition, thermal conductivity), along with triaxial compression, consolidation, and permeability tests with a nuclear magnetic resonance (NMR) analyzer were conducted. Compression tests at different strain rates confirmed a strain rate dependence for hydrate-bearing sediment, and an equation for predicting strength as a function of hydrate saturation and strain rate is proposed. Compression and swelling indices were obtained from high-effective stress consolidation tests. Furthermore, secondary compression coefficients for hydrate-bearing sediments were obtained, suggesting that hydrate exhibits creeping behavior on timescales of minutes to hours. A relatively high initial permeability of a few millidarcys was confirmed. In addition, the first NMR signal measurement was performed on a hydrate-bearing pressure core to acquire the NMR transverse or spin-spin ( T 2 ) distribution. Results confirm that the Schlumberger Doll Research model and Timur-Coates model predictions underestimate permeability measured directly via fluid flow. Permeability estimated using specific surface values derived from NMR T 2 distributions is in good agreement with flow test results. Finally, an extended Timur-Coates model was proposed and predicts intrinsic permeability with high accuracy.

Texas↗

USGS2003

Mobilization of radionuclides from uranium mill tailings and related waste materials in anaerobic environments

Specific extraction studies in our laboratory have shown that iron and manganese oxide- and alkaline earth sulfate minerals are important hosts of radium in uranium mill tailings. Iron- and sulfate-reducing bacteria may enhance the release of radium (and its analog barium) from uranium mill tailings, oil field pipe scale [a major technologically enhanced naturally occurring radioactive material (TENORM) waste], and jarosite (a common mineral in sulfuric acid processed-tailings). These research findings are reviewed and discussed in the context of nuclear waste forms (such as barium sulfate matrices), radioactive waste management practices, and geochemical environments in the Earth's surficial and shallow subsurface regions.

Journal of Radioanalytical and Nuclear Chemistry↗

USGS2000

Taking the Earth's Pulse

During the past 35 years, scientists have developed a vast network of seismometers that record earthquakes, volcanic eruptions, and nuclear explosions throughout the world. Seismographic data support disaster response, scientific research, and global security. With this network, the United States maintains world leadership in monitoring the greatest natural and technological events that threaten our planet's population.

Fact Sheet↗

USGS1997

Taking the Earth's pulse

Fact Sheet↗

USGS2011

Abbreviated bibliography on energy development—A focus on the Rocky Mountain Region

Energy development of all types continues to grow in the Rocky Mountain Region of the western United States. Federal resource managers increasingly need to balance energy demands, effects on the natural landscape and public perceptions towards these issues. To assist in efficient access to valuable information, this abbreviated bibliography provides citations to relevant information for myriad of issues for which resource managers must contend. The bibliography is organized by seven large topics with various sup-topics: broad energy topics (energy crisis, conservation, supply and demand, etc.); energy sources (fossil fuel, nuclear, renewable, etc.); natural landscape effects (climate change, ecosystem, mitigation, restoration, and reclamation, wildlife, water, etc.); human landscape effects (attitudes and perceptions, economics, community effects, health, Native Americans, etc.); research and technology; international research; and, methods and modeling. A large emphasis is placed on the natural and human landscape effects.

Idaho;Montana;Wyoming;Utah;Colorado;New Mexico;Ari↗

USGS2010

Derivation of cat embryonic stem-like cells from in vitro-produced blastocysts on homologous and heterologous feeder cells

The domestic cat is a focal mammalian species that is used as a model for developing assisted reproductive technologies for preserving endangered cats and for studying human diseases. The generation of stable characterized cat embryonic stem cells (ESC) lines to use as donor nuclei may help to improve the efficiency of interspecies somatic cell nuclear transfer for preserving endangered cats and allow the creation of knockout cell lines to generate knockout cats for studying function of specific genes related to human diseases. It will also enable the possibility of producing gametes in vitro from ESC of endangered cats. In the present study, we report the generation of cat embryonic stem-like (cESL) cells from blastocysts derived entirely in vitro. We generated 32 cESL cell lines from 331 in vitro derived blastocysts from which inner cell masses were isolated by immunosurgery or by a mechanical method. Inhibition of cat dermal fibroblast (CDF) proliferation after exposure to mitomycin-C was both dose and time dependent, where doses of 30 to 40 microg/mL for 5 h were most efficient. These dosages were higher than that required to inhibit cell proliferation of mouse fetal fibroblasts (MFF; 10 microg/mL for 2.5 h). Mitomycin-C did not significantly increase necrosis of cells from either species, and had an anti-proliferative effect at concentrations below cytotoxicity. A clear species-specific relationship between feeder layers and derivation of cESL cell lines was observed, where higher numbers of cESL cell lines were generated on homologous cat feeder layers (n = 26) than from those derived on heterologous mouse feeder layers (n = 6). Three cESL cell lines generated from immunosurgery and cultured on CDF maintained self-renewal and were morphologically undifferentiated for nine and twelve passages (69-102 days). These lines showed a tightly packed dome shaped morphology, exhibited alkaline phosphatase activity and immuno-expression of the pluripotent marker OCT-4 and surface marker SSEA-1. Primary colonies at P0 to P3 and cat blastocysts expressed transcription factors OCT-4, NANOG and SOX-2 and the proto-oncogene C-MYC. However, expression was at levels significantly lower than in vitro produced blastocysts. During culture, cESL colonies spontaneously differentiated into fibroblasts, cardiomyocytes, and embryoid bodies. Development of techniques to prevent differentiation of cESL cells will be essential for maintaining defined cell lines

Theriogenology↗

USGS2020

Petrophysical and geomechanical properties of gas hydrate-bearing sediments recovered from Alaska North Slope 2018 Hydrate-01 Stratigraphic Test Well

Knowledge of petrophysical and geomechanical properties of gas hydrate-bearing sediments are essential for predicting reservoir responses to gas production. The same information is also needed for the designing of production well completions such as specifications for artificial lift, test site water storage capacity, and mesh size for the sand control systems. In December 2018, the Stratigraphic Test Well Hydrate-01 was drilled in the western part of the Prudhoe Bay Unit on the Alaska North Slope as part of the technical planning effort for a future long-term production test being planned and led by a collaborative team from the U.S. Department of Energy - National Energy Technology Laboratory (DOE-NETL), U.S. Geological Survey (USGS), and Japan’s Research and Development Consortium for Pore Filling Hydrate in Sand (MH21-S) (Boswell et al., 2020, Collett et al., 2020, Okinaka et al., 2020). Logging-while-drilling (LWD) data were acquired (Haines et al., 2020, Suzuki et al., 2019) and sidewall core sampling depths were selected from the LWD logs. Sidewall pressure coring was conducted to recover gas hydrate-bearing sediments from two reservoir sections named Unit B and Unit D. A total of 34 cores were successfully recovered by 5 runs of a wireline deployed pressure coring system (CoreVault® System - Halliburton). The core analysis plan for this project is shown in Figure 1. Upon recovery, the pressure core autoclaves were transported from the Alaska North Slope to the Stratum Reservoir laboratory in Anchorage Alaska. To access the cores, they were first quenched in liquid nitrogen while still at high pressure in the core system autoclaves (Figure 1a). The cores were next removed from the pressure corer autoclaves with temperature control support from dry ice and stored under liquid nitrogen at atmospheric pressure. A total of 19 disturbed low-quality cores were processed for index property measurements, which included grain size and grain density analysis. Another 4 core samples were depressurized, trimmed, and core plugs were cut from each core and used to measure intrinsic permeabilities of host sediments (Figure 1). Unsteady-state permeability measurements were conducted on two samples to obtain relative water permeability (Rel.-Perm.) to gas and core scale Nuclear Magnetic Resonance (NMR) transverse relaxation time (T2) distribution measurements were performed to evaluate pore size distribution (Figure 1b). A total of 13 remaining high-quality cores with significant gas hydrate concentrations were preserved for advanced laboratory analysis. The National Institute of Advanced Industrial Science and Technology, as a part of the Japanese National Hydrate Research Program (MH21-S, funded by Ministry of Economy, Trade and Industry), received the 13 remaining high-quality core samples at their laboratories in Sapporo, Japan for advanced core analysis. High-resolution X-ray computed tomography (CT) was used to analyze the physical characteristics of the samples, which showed for the most part undisturbed lithological layers. Cores were lathed into cylindrical shapes and prepared for multi property measurements (Figure 1c). As a result, sediment from Unit D was characterized as silty-sand at ~37% porosity with ~80% gas hydrate saturation. An average hydration number n = 6.16 was measured for the recovered gas hydrate samples by Raman spectroscopy. An average intrinsic permeability of ~400 mD and in situ effective permeability (with hydrate) on the order of ~10 mD was measured for a total of five core samples. The Unit B recovered cores consisted of well sorted sand at ~40% porosity with ~95% gas hydrate saturation. An average intrinsic permeability of ~1 Darcy and in situ effective permeability on the order of ~30 mD was measured for the Unit B cores. Additional laboratory measurements yielded small permeability reductions due to porosity loss with increasing effective stress that simulated sediment consolidation along with depressurization in the highly permeable sandy sediment. The apparent limited change in porosity and permeability may be caused by the low compressibility of quartz sand grains in the recovered cores. X-ray diffraction (XRD) and thermal conductivity analysis also indicated a high quartz content within the recovered cores. Completed triaxial compression tests established internal friction angles based on the Mohr-Coulomb's failure criterion, which were calculated at 40° for hydrate-bearing sediment and 29.8° for hydrate free sediment.

Alaska↗

USGS2009

Deep Resistivity Structure of Mid Valley, Nevada Test Site, Nevada

The U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) at their Nevada Site Office (NSO) are addressing ground-water contamination resulting from historical underground nuclear testing through the Environmental Management (EM) program and, in particular, the Underground Test Area (UGTA) project. From 1951 to 1992, 828 underground nuclear tests were conducted at the Nevada Test Site northwest of Las Vegas (DOE UGTA, 2003). Most of these tests were conducted hundreds of feet above the ground-water table; however, more than 200 of the tests were near, or within, the water table. This underground testing was limited to specific areas of the Nevada Test Site including Pahute Mesa, Rainier Mesa/Shoshone Mountain (RM-SM), Frenchman Flat, and Yucca Flat. One issue of concern is the nature of the somewhat poorly constrained pre-Tertiary geology and its effects on ground-water flow in the area subsequent to a nuclear test. Ground-water modelers would like to know more about the hydrostratigraphy and geologic structure to support a hydrostratigraphic framework model that is under development for the Rainier Mesa/Shoshone Mountain (RM-SM) Corrective Action Unit (CAU) (National Security Technologies, 2007). During 2003, the U.S. Geological Survey (USGS), in cooperation with the DOE and NNSA-NSO collected and processed data at the Nevada Test Site in and near Yucca Flat (YF) to help define the character, thickness, and lateral extent of the pre-Tertiary confining units. We collected 51 magnetotelluric (MT) and audio-magnetotelluric (AMT) stations for that research (Williams and others, 2005a, 2005b, 2005c, 2005d, 2005e, and 2005f). In early 2005 we extended that research with 26 additional MT data stations (Williams and others, 2006) located on and near Rainier Mesa and Shoshone Mountain (RM-SM). The new stations extended the area of the hydrogeologic study previously conducted in Yucca Flat, further refining what is known about the pre-Tertiary confining units. In particular, a major goal was to define the extent of the upper clastic confining unit (UCCU). The UCCU is composed of late Devonian to Mississippian siliciclastic rocks assigned to the Eleana Formation and Chainman Shale (National Security Technologies, 2007). The UCCU underlies the Yucca Flat area and extends southwestward toward Shoshone Mountain, westward toward Buckboard Mesa, and northwestward toward Rainier Mesa. Late in 2005 we collected data at an additional 14 MT stations in Mid Valley, CP Hills, and northern Yucca Flat. That work was done to better determine the extent and thickness of the UCCU near the boundary between the southeastern RM-SM CAU and the southwestern YF CAU, and also in the northern YF CAU. The MT data have been released in a separate U.S. Geological Survey report (Williams and others, 2007). The Nevada Test Site magnetotelluric data interpretation presented in this report includes the results of detailed two-dimensional (2-D) resistivity modeling for each profile and inferences on the three-dimensional (3-D) character of the geology within the region.

Nevada↗

USGS2019

Establishing genome sizes of focal fishery and aquaculture species along Baja California, Mexico

Genome size—the total haploid content of nuclear DNA— is constant in all cells in individuals within a species, but differs among species. Consequently, the genome size is a quantifiable genetic signature that not only characterizes a species, but it can reflect chromatin modifications, which play fundamental roles in most biological processes that are involved in the manipulation and expression of DNA. This characteristic makes the genome size a crucial parameter for genetic research on endemic aquatic species and for genetic manipulations in aquaculture species. Technologies for genetic assessments and improvements applied to fishery and aquaculture species use genome size values as a means by which hybrids, polyploids, and sex can be identified, when sex chromosomes exist. The objectives of this study were to determine genome sizes of aquatic species with economic and biological importance along the Pacific coast of Mexico, as well as to identify the appropriate reference standards for use in this study. Blood, hemolymph or milt were collected from 10 species occurring along the coast of Baja California: Sablefish Anoplopoma fimbria , Black Snapper Lutjanus novemfasciatus , California Halibut Paralichthys californicus , Pacific Sardine Sardinops sagax , Flag Rockfish Sebastes rubrivinctus , Starry Rockfish Sebastes constellatus, Totoaba Totoaba macdonaldi , Whiteleg Shrimp Litopenaeus vannamei and two Yellowtail Seriola lalandi and S. dorsalis . Nuclear DNA was stained with propidium iodide solution and the genome size was determined by flow cytometry, with results ranging from 0.61 pg (1.22 pg/diploid cell) to 2.59 pg (5.18 pg/diploid cell), with the smallest value in Sablefish and the largest in the Whiteleg Shrimp. No significant differences were detected ( P ≤ 0.05) among individuals of the same species; the likely reason behind any dissimilar DNA content values with those from the literature were differences in methodologies or variations in genetics. Red-ear Slider Turtle Trachemys scripta elegans 2.65 pg (5.30 pg/diploid cell) and Red Junglefowl Gallus gallus 1.27 pg (2.54 pg/diploid cell) were chosen as the standards for reference values. These results establish the basis for the Mexican National Aquatic Genetic Resources project supporting genetic improvements for aquaculture and conservation status parameters for fisheries species.

Baja California↗

USGS2023

Global seismic networks operated by the U.S. Geological Survey

The U.S. Geological Survey (USGS) Global Seismographic Network (GSN) Program operates two thirds of the GSN, a network of state‐of‐the‐art, digital seismological and geophysical sensors with digital telecommunications. This network serves as a multiuse scientific facility and a valuable resource for research, education, and monitoring. The other one third of the GSN is funded by the National Science Foundation (NSF), and the operations of this component are overseen by EarthScope. This collaboration between the USGS, EarthScope, and NSF has allowed for the development and operations of the GSN to be a truly multiuse network that provides near real‐time open access data, facilitating fundamental discoveries by the Earth science community, supporting the earthquake hazards mission of the USGS, benefitting tsunami monitoring by the National Oceanic and Atmospheric Administration, and contributing to nuclear test monitoring and treaty verification. In this article, we describe the installation and evolution of the seismic networks operated by the USGS that ultimately led to the USGS portion of the GSN (100 stations under network codes IU, IC, and CU) as they are today and envision technological advances and opportunities to further improve the utility of the network in the future. This article focuses on the USGS‐operated component of the GSN; a companion article on the GSN stations funded by the NSF and operated by the Cecil and Ida Green Institute of Geophysics and Planetary Physics, Scripps Institution of Oceanography, University of California at San Diego by Davis et al. (2023) appears in this volume.

Seismological Research Letters↗

USGS2012

Field experiment provides ground truth for surface nuclear magnetic resonance measurement

The need for sustainable management of fresh water resources is one of the great challenges of the 21st century. Since most of the planet's liquid fresh water exists as groundwater, it is essential to develop non-invasive geophysical techniques to characterize groundwater aquifers. A field experiment was conducted in the High Plains Aquifer, central United States, to explore the mechanisms governing the non-invasive Surface NMR (SNMR) technology. We acquired both SNMR data and logging NMR data at a field site, along with lithology information from drill cuttings. This allowed us to directly compare the NMR relaxation parameter measured during logging, T 2 , to the relaxation parameter T 2 * measured using the SNMR method. The latter can be affected by inhomogeneity in the magnetic field, thus obscuring the link between the NMR relaxation parameter and the hydraulic conductivity of the geologic material. When the logging T 2 data were transformed to pseudo- T 2 * data, by accounting for inhomogeneity in the magnetic field and instrument dead time, we found good agreement with T 2 * obtained from the SNMR measurement. These results, combined with the additional information about lithology at the site, allowed us to delineate the physical mechanisms governing the SNMR measurement. Such understanding is a critical step in developing SNMR as a reliable geophysical method for the assessment of groundwater resources.

Geophysical Research Letters↗

USGS2026

Colocating artificial intelligence data centers with energy infrastructure on Federal public lands—A science synthesis and spatial analysis to inform decision making

Executive Summary Artificial intelligence (AI) is rapidly transforming industries and economies, creating an urgent need to strategically plan for the energy and infrastructure required to support increasing AI use. U.S. Federal agencies and bureaus have been directed to explore ways to accelerate permitting, development, and deployment of energy resources and AI technologies, including encouraging the colocation of energy infrastructure and data centers. To inform these initiatives, this report synthesizes relevant scientific information and presents a spatial analysis of existing energy infrastructure and data centers on or near U.S. Federal public lands managed by the Bureau of Land Management (BLM). The purpose of this science synthesis and spatial analysis is to provide the BLM with foundational information for considering potential colocation of data centers with energy infrastructure on Federal public lands to support evidence-based decisions. Additionally, this report provides insight into current (2025) and potential future energy demands by providing projections of a range of potential future environmental conditions relevant to maintaining industry-recommended cooling temperature standards necessary for efficient data center operations. As a part of this effort, a rapid response literature review was conducted of the best available science on the topic of data center development and energy infrastructure in July–August 2025, supplemented by additional resources recommended by U.S. Federal agency and bureau subject matter experts (hereafter experts; including the U.S. Department of Energy National Laboratory of the Rockies) and peer reviewers. To better understand current conditions relevant to AI data center development, a spatial analysis was conducted across Alaska and 11 States in the Western United States, Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming, all of which contain extensive BLM-managed surface lands (hereafter referred to as “BLM lands”) that could be considered for the colocation of energy infrastructure and AI data centers. This effort identified BLM lands within 10 miles of existing transmission lines, consistent with methods used in previous BLM programmatic environmental impact statements. This report describes the types of data centers operating within the United States, which vary in ownership, size, technology, and proximity to end users. This report then outlines the primary considerations of data center development, including reliable energy supply, natural resources (such as water availability to support cooling requirements), and relevant policy and regulatory considerations. Energy supply considerations are pivotal for data center operation. Between 2014 and 2018, data centers in the United States accounted for nearly 2 percent of the Nation’s total electricity consumption, and data center energy consumption is projected to increase from 2 to 6.7–12 percent of total U.S. electricity use by 2028. These energy requirements necessitate careful consideration of energy supply when considering potentially suitable locations for data center development. Experts anticipate that an increase in renewable energy generation will likely support most potential future power demand needs, including for data centers, followed by increases in natural gas, nuclear, and geothermal energy production. Additional capacity in the form of battery storage will likely not generate electricity, but may improve the reliability and flexibility of supply, helping to ensure that growing data center loads can be met. However, the U.S. Department of Energy estimates that the United States will need, on average, 57 percent more energy transmission infrastructure by 2035 to account for the growing power demand introduced by development such as data centers. Cooling server equipment in data centers requires large amounts of electricity and water, and this demand can be exacerbated by hot and humid conditions. Energy efficient water-based cooling technologies may reduce electricity consumption onsite but require more water consumption. This additional water demand has the potential to increase water stress and competition with other users. As such, developing data centers will likely need a thorough assessment of current and potential future water availability, as well as consideration of how water demand may change across other sectors. Data center development involves policy and regulatory considerations, as projects must undergo environmental review and authorization processes that can take 18–24 months. Coordinating these environmental reviews and authorizations with other energy development projects, such as building new transmission lines, may cause additional delays. Recent efforts by the U.S. Department of Energy and U.S. Department of the Interior aim to expedite environmental reviews and authorizations and improve coordination across agencies. The spatial analysis identified 771 existing AI data centers and more than 3,300 power plants. The spatial analysis found that 6 percent of AI data centers and 22 percent of power plants in the Western United States were on or within 1 mile of BLM lands, and California had the largest number of facilities. Most existing AI data centers were near high-voltage transmission lines and close to power plants, supporting efficient energy delivery. More than 90,000,000 acres of BLM lands were within 10 miles of existing high-voltage transmission lines, representing 38 percent of BLM lands in the study area. Available transmission infrastructure and the overlap with BLM lands varied by State, and Alaska had limited overlap compared to the rest of the Western United States. To operate most efficiently, data center temperatures must be at or below 80.6 degrees Fahrenheit. This analysis of future temperature and precipitation projections indicated increasing cooling demands for data centers, particularly in Arizona, California, and Nevada, where rising temperatures are expected to increase energy and operational costs while potentially stressing current regional electrical grid infrastructure. This report highlights relevant energy supply, natural resources, and regulatory considerations for data center development on BLM lands. This report does not provide a comprehensive ecological, regulatory, land suitability, or permitting analysis. The factors described here are contextual considerations only and are not intended to identify, rank, quantify, or recommend optimal areas for data center colocation. This spatial analysis focused solely on energy considerations relevant to data centers and did not consider water availability, critical habitats, BLM National Conservation Lands, areas of cultural or historical significance, and other sensitive resources. These topics are recognized as critical but were not within the scope of this science synthesis and spatial analysis.

Scientific Investigations Report↗

USGS1998

Molecular contributions to conservation

Recent advances in molecular technology have opened a new chapter in species conservation efforts, as well as population biology. DNA sequencing, MHC (major histocompatibility complex), minisatellite, microsatellite, and RAPD (random amplified polymorphic DNA) procedures allow for identification of parentage, more distant relatives, founders to new populations, unidentified individuals, population structure, effective population size, population-specific markers, etc. PCR (polymerase chain reaction) amplification of mitochondrial DNA, nuclear DNA, ribosomal DNA, chloroplast DNA, and other systems provide for more sophisticated analyses of metapopulation structure, hybridization events, and delineation of species, subspecies, and races, all of which aid in setting species recovery priorities. Each technique can be powerful in its own right but is most credible when used in conjunction with other molecular techniques and, most importantly, with ecological and demographic data collected from the field. Surprisingly few taxa of concern have been assayed with any molecular technique. Thus, rather than showcasing exhaustive details from a few well-known examples, this paper attempts to present a broad range of cases in which molecular techniques have been used to provide insight into conservation efforts.

Ecology↗