Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “National Park Service Natural Resource Data Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

52 records · Page 3Linked to original sources
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2009

EAARL Coastal Topography-Assateague Island National Seashore, 2008: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Assateague Island National Seashore in Maryland and Virginia, acquired March 24-25, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for pre-survey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2009

EAARL coastal topography — Northern Gulf of Mexico, 2007: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar -derived bare earth ( BE ) topography were produced as a collaborative effort between the U.S. Geological Survey ( USGS ), Florida Integrated Science Center ( FISC ), St. Petersburg, FL ; the National Park Service ( NPS ), Gulf Coast Network, Lafayette, LA ; and the National Aeronautics and Space Administration ( NASA ), Wallops Flight Facility, VA . The purpose of this project is to provide highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired on June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar ( EAARL ), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar , a down-looking red-green-blue ( RGB ) digital camera, a high-resolution multi-spectral color infrared ( CIR ) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system and the resulting data were then processed using the Airborne Lidar Processing System ( ALPS ), a custom-built processing system developed in a NASA - USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

northern Gulf of Mexico↗
USGS2010

EAARL coastal topography-Cape Hatteras National Seashore, North Carolina, post-Nor'Ida, 2009: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2008

EAARL submerged topography– U.S. Virgin Islands 2003

These remotely sensed, geographically referenced elevation measurements of Lidar-derived submerged topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), South Florida-Caribbean Network, Miami, FL; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate bathymetric datasets of a portion of the U.S. Virgin Islands, acquired on April 21, 23, and 30, May 2, and June 14 and 17, 2003. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

St John Island↗
USGS2010

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography and Imagery-Naval Live Oaks Area, Gulf Islands National Seashore, Florida, 2007

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) topography, first-surface (FS) topography, and canopy-height (CH) datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Naval Live Oaks Area in Florida's Gulf Islands National Seashore, acquired June 30, 2007. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography-Fire Island National Seashore, New York, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2015

Evaluation of fisher (Pekania pennanti) restoration in Olympic National Park and the Olympic Recovery Area: 2014 annual progress report

With the translocation and release of 90 fishers ( Pekania pennanti ) from British Columbia to Olympic National Park during 2008–2010, the National Park Service and Washington Department of Fish and Wildlife accomplished the first phase of fisher restoration in Washington State. Beginning in 2013, we initiated a new research project to determine the current status of fishers on Washington’s Olympic Peninsula 3–5 years after the releases and evaluate the short-term success of the restoration program. Objectives of the study are to determine the current distribution of fishers and proportion of the recovery area that is currently occupied by fishers, determine several genetic characteristics of the reintroduced population, and determine reproductive success of the founding animals through genetic studies. During 2014, we continued working with a broad coalition of cooperating agencies, tribes, and nongovernmental organizations (NGO) to collect data on fisher distribution and genetics using noninvasive sampling methods. The primary sampling frame consisted of 157 24-square-kilometer hexagons (hexes) distributed across all major land ownerships within the Olympic Peninsula target survey area. In 2014 we expanded the study by adding 58 more hexes to an expanded study area in response to incidental fisher observations outside of the target area obtained in 2013; 49 hexes were added south and 9 to the east of the target area. During 2014, federal, state, tribal and NGO biologists and volunteers established three baited motion-sensing camera stations, paired with hair snaring devices, in 80 hexes; 69 in the targeted area 11 in the expansion areas. Each paired camera/hair station was left in place for approximately 6 weeks, with three checks on 2-week intervals. We documented fisher presence in 5 of the 80 hexagons, and identified 5 different fishers through a combination of microsatellite DNA analyses and camera detections. All fisher detections were in the target area. These 5 individuals included 2 of the original founding population of 90, 1 of the 2 rescued and rehabilitated kits that were released in 2010, and 1 new recruit to the population (1 individual was not identified). Additionally, we identified more than 40 other species of wildlife at the baited camera stations. We also obtained eight incidental fisher observations through photographs and carcass retrieval. During 2015, we plan to sample 75 hexagons in the target area and 12 in the expansion area. We plan to sample all unsampled accessible hexes in the target area (26 hexes), and re-sample accessible hexes sampled in 2013 (49 hexes).

Washington↗
USGS2011

Data compilation and assessment for water resources in Pennsylvania state forest and park lands

As a result of a cooperative study between the U.S. Geological Survey and the Pennsylvania Department of Conservation and Natural Resources (PaDCNR), available electronic data were compiled for Pennsylvania state lands (state forests and parks) to allow PaDCNR to initially determine if data exist to make an objective evaluation of water resources for specific basins. The data compiled included water-quantity and water-quality data and sample locations for benthic macroinvertebrates within state-owned lands (including a 100-meter buffer around each land parcel) in Pennsylvania. In addition, internet links or contacts for geographic information system coverages pertinent to water-resources studies also were compiled. Water-quantity and water-quality data primarily available through January 2007 were compiled and summarized for site types that included streams, lakes, ground-water wells, springs, and precipitation. Data were categorized relative to 35 watershed boundaries defined by the Pennsylvania Department of Environmental Protection for resource-management purposes. The primary sources of continuous water-quantity data for Pennsylvania state lands were the U.S. Geological Survey (USGS) and the National Weather Service (NWS). The USGS has streamflow data for 93 surface-water sites located in state lands; 38 of these sites have continuous-recording data available. As of January 2007, 22 of these 38 streamflow-gaging stations were active; the majority of active gaging stations have over 40 years of continuous record. The USGS database also contains continuous ground-water elevation data for 32 wells in Pennsylvania state lands, 18 of which were active as of January 2007. Sixty-eight active precipitation stations (primarily from the NWS network) are located in state lands. The four sources of available water-quality data for Pennsylvania state lands were the USGS, U.S. Environmental Protection Agency, Pennsylvania Department of Environmental Protection (PaDEP), and the Susquehanna River Basin Commission. The water-quality data, which were primarily collected after 1970, were summarized by categorizing the analytical data for each site into major groups (for example, trace metals, pesticides, major ions, etc.) for each type (streams, lakes, ground-water wells, and springs) of data compiled. The number of samples and number of detections for each analyte within each group also were summarized. A total of 410 stream sites and 205 ground-water wells in state lands had water-quality data from the available data sets, and these sites were well-distributed across the state. A total of 107 lakes and 47 springs in state lands had water-quality data from the available data sets, but these data types were not well-distributed across the state; the majority of water-quality data for lakes was in the western or eastern sections of the state and water-quality data for springs was primarily located in the central part of the Lower Susquehanna River Valley. The most common types of water-quality data collected were major ions, trace elements, and nutrients. Physical parameters, such as water temperature, stream discharge, or water level, typically were collected for most water-quality samples. Given the large database available from PaDEP for benthic macroinvertebrates, along with some data from other agencies, there is very good distribution of benthic-macroinvertebrate data for state lands. Benthic macroinvertebrate samples were collected at 1,077 locations in state lands from 1973 to 2006. Most (980 samples) of the benthic-macroinvertebrate samples were collected by PaDEP as part of the state assessment of stream conditions required by the Clean Water Act. Data compiled in this report can be used for various water-resource issues, such as basin-wide water-budget analysis, studies of ecological or instream flow, or water-quality assessments. The determination of an annual water budget in selected basins is best supported by the availab

Pennsylvania↗
USGS2013

Pacific Island landbird monitoring annual report, Haleakalā National Park, 2012

Haleakalā National Park (HALE) was surveyed for landbirds and habitat characteristics from March 20 through July 26, 2012. This information provides data in the time-series of landbird monitoring for long-term trends in forest bird distribution, density, and abundance. The Kīpahulu District of eastern Haleakalā Volcano was surveyed using point-transect distance sampling to estimate bird abundance. We surveyed 160 stations and detected a total of 2,830 birds from 12 species. Half of the species were native and half were non-native. Numbers of detections per species ranged from 1 to 849. There were sufficient detections of seven species to allow density estimation. Āpapane ( Himatione sanguinea ) was the most widely distributed and abundant native species detected in the survey. ‘Alauahio ( Paroreomyza montana newtoni ), Maui ‘Amakihi ( Hemignathus virens wilsoni ), and I‘iwi ( Vestiaria coccinea ) were widespread and occurred in relatively modest densities. Only eight Kiwikiu ( Pseudonestor xanthophrys ) and 20 ‘Ākohekohe ( Palmeria dolei ) were detected and were restricted to high elevation wet forest. We estimated an abundance of 495 ± 261individuals of Kiwikiu in a 2,036 ha inference area which likely includes the entire suitable habitat for this species in HALE. For ‘Ākohekohe, we estimated an abundance of 1,150 ± 389 individuals in the 1,458 ha inference area. There was a strong representation of non-native landbirds in the survey area. The Japanese White-eye ( Zosterops japonicus ), Japanese Bush-warbler ( Cettia diphone ), and Red-billed Leiothrix ( Leiothrix lutea ) accounted for nearly half of all landbird detections. Each species was common in predominantly native forests. Vegetation and topographic characteristics were recorded on 160 landbird monitoring stations. HALE canopy and understory composition was predominantly native, especially at elevations above 1,100 m. Much of the forest canopy was comprised of `ohi`a ( Metrosideros polymorpha ) interspersed with mature olapa ( Cheirodendron platyphyllum ). This canopy class occurred at 92.5% of the stations surveyed. More than three-quarters (77.5%) of the monitoring stations had a dense canopy with most crowns interlocking (> 60% cover). More than half (52%) of the stations surveyed had trees taller than 10 m, while almost a third (31%) had trees 5-10 m. Only 17% of the stations had a canopy shorter than 5 m. The native shrubs Vaccinium calycinum , Broussaisia arguta , and Leptecophylla tameiameae were the most common understory plants recorded, occurring at more than 30% of the stations sampled. Native mosses and ferns were also common at stations, occurring at more than 90% of the stations sampled. The invasive Psidium cattleainum , Clidemia hirta , and Hedychium gardnerianum occurred at approximately 14% of the stations sampled, predominantly at elevations below 1,100 m.

Hawai'i↗
USGS2013

Pacific island landbird monitoring annual report, National Park of American Samoa, Ta‘u and Tutuila units, 2011

The National Park of American Samoa (NPSA) was surveyed for landbirds and habitat characteristics from June through August, 2011. This information provides the first data in the time-series of landbird monitoring for long-term trends in forest bird distribution, density, and abundance within the NPSA. The NPSA survey area was comprised of the terrestrial portions of the Ta‘u and Tutuila Units. Each Unit was surveyed using point-transect distance sampling to estimate bird abundance. Sampling was conducted using a split-panel design where legacy transects are visited during each sampling occasion and newly, randomly located transects are visited only during one sampling occasion. This design optimizes trend detection while allowing for measuring and correcting for estimator bias. A total of 2,516 birds was detected from 13 species in both Units. All species were either endemic or indigenous to the islands of American Samoa. Numbers of detections ranged from 7 to 1,111. Nearly every species detected was broadly distributed in the predominantly native forests of NPSA. Sufficient detections were made of seven species, allowing for density estimation. Densities of species were higher in the Tutuila Unit; with the exception of the Wattled Honeyeater ( Foulehaio carunculata ), which was the most abundant species in both Units. The species occurred at nearly every station sampled and had densities much higher than the Samoan Starling ( Aplonis atrifusca ), Polynesian Starling ( Aplonis tabuensis ), and Collared Kingfisher ( Halcyon chloris ) which occurred in modest densities. The remaining species detected occurred at less than 20% of stations sampled and we were only able to determine the number of birds per station and percent occurrence. The White-rumped Swiftlet ( Aerodramus spodiopygius ) and Cardinal Honeyeater ( Myzomela cardinalis ) were detected in small numbers, but both species can be difficult to detect in closed canopy forests. The Purple Swamphen ( Porphyrio porphyrio ) and Banded Rail ( Gallirallus philippensis ) were most often detected in areas close to villages and agroforestry plantations. The Blue-crowned Lorikeet ( Vini australis ) and Fiji Shrikebill ( Clytorhynchus vitiensis ) only occur in the Manu‘a Island Group. The former was detected in most survey areas and the latter was patchily distributed in the Ta‘u Unit. The Many-colored Fruit-dove ( Ptilinopus perousii ), a species of concern, was detected in very small numbers in both Units. The Spotless Crake ( Porzana tabuensi ), which is extirpated on Tutuila Island, has been incidentally detected in small numbers on Ta‘u Island. However, the species was neither seen nor heard during this survey and remains a species of concern. NPSA canopy and understory composition was predominantly native, and trees formed a dense closed canopy at nearly 90% of the stations sampled. More than half of the tree heights in both units were taller than 5 m and the majority of slopes were steeper than 20 degrees. There were no clear dominant tree species in the mixed native forests. The most common tree species documented included Syzygium spp., Dysoxylum spp., Ficus spp., Hibiscus tiliaceus and Rhus taitensis (among others). There were significant differences in the distribution of bird densities between legacy and random transects. Determining differences in detection probabilities cannot be definitively assessed from a single survey. We recommend both panels be sampled in the future until bias in density and abundance can be evaluated, or if sampling may be reduced.

American Samoa;National Park Of American Samoa↗
USGS2014

U.S. Geological Survey Karst Interest Group Proceedings, Carlsbad, New Mexico, April 29-May 2, 2014

Karst aquifer systems are present throughout parts of the United States and some of its territories, and have developed in carbonate rocks (primarily limestone and dolomite) that span an interval of time encompassing more than 550 million years. The depositional environments, diagenetic processes, post-depositional tectonic events, and geochemical weathering processes that form karst aquifers are varied and complex, and involve biological, chemical, and physical changes. These factors, combined with the diverse climatic regimes under which karst development in these rocks has taken place, result in the unique dual- or triple-porosity nature of karst aquifers. These complex hydrogeologic systems typically represent challenging and unique conditions to scientists attempting to study groundwater flow and contaminant transport in these terrains. The dissolution of carbonate rocks and the subsequent development of distinct and beautiful landscapes, caverns, and springs has resulted in the most exceptional karst areas of the United States being designated as national or state parks; commercial caverns and known privately owned caves number in the tens of thousands. Both public and private properties provide access for scientists to study the flow of groundwater in situ. Likewise, the range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than for any other aquifer type. Karst aquifers and landscapes that form in tropical areas, such as the cockpit karst along the north coast of Puerto Rico, differ greatly from karst landforms in more arid climates, such as the Edwards Plateau in west-central Texas or the Guadalupe Mountains near Carlsbad, New Mexico, where hypogenic processes have played a major role in speleogenesis. Many of these public and private lands also contain unique flora and fauna associated with these karst hydrogeologic systems. As a result, numerous federal, state, and local agencies have a strong interest in the study of karst terrains. Many of the major springs and aquifers in the United States have developed in carbonate rocks, such as the Floridan aquifer system in Florida and parts of Alabama, Georgia, and South Carolina; the Ozark Plateaus aquifer system in parts of Arkansas, Kansas, Missouri, and Oklahoma; and the Edwards-Trinity aquifer system in west-central Texas. These aquifers, and the springs that discharge from them, serve as major water-supply sources and as unique ecological habitats. Competition for the water resources of karst aquifers is common, and urban development and the lack of attenuation of contaminants in karst areas can impact the ecosystem and water quality of these aquifers. The concept for developing a platform for interaction among scientists within the U.S. Geological Survey (USGS) working on karst-related studies evolved from the November 1999 National Ground-Water Meeting of the USGS. As a result, the Karst Interest Group (KIG) was formed in 2000. The KIG is a loose-knit, grass-roots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst science. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. Additionally, the KIG encourages collaborative studies between the different mission areas of the USGS as well as other federal and state agencies, and with researchers from academia and institutes. The KIG also encourages younger scientists by participation of students in the poster and oral sessions. To accomplish its mission, the KIG has organized a series of workshops that are held near nationally important karst areas. To date (2014) six KIG workshops, including the workshop documented in this report, have been held. The workshops typically include oral and poster sessions on selected karst-related topics and research, as well as field trips to local karst features. Proceedings of the workshops are published by the USGS and are available online at http://water.usgs.gov/ogw/karst/kig . The first KIG workshop was held in St. Petersburg, Florida, February 13–16, 2001, in the vicinity of the large springs and other karst features of the Floridan aquifer system. The second KIG workshop was held August 20–22, 2002, in Shepherdstown, West Virginia, in proximity to the carbonate aquifers of the northern Shenandoah Valley and highlighted an invited presentation on karst literature by the late Barry F. Beck of P.E. LaMoreaux and Associates. The third KIG workshop was held September 12–15, 2005, in Rapid City, South Dakota, nearby to karst features in evaporites and limestones of the Madison Group in the Black Hills of South Dakota, including Wind Cave National Park and Jewel Cave National Monument. The workshop also included a featured presentation by Thomas Casadevall, Central Region Director, USGS, on the status of earth science at the USGS and evening trips to Jewel Cave led by Mike Wiles, National Park Service (NPS) and Wind Cave led by Rod Horrocks, NPS. The fourth KIG workshop was held May 27–29, 2008, and hosted by the Hoffman Environmental Research Institute and Center for Cave and Karst Studies at Western Kentucky University in Bowling Green, Kentucky, near Mammoth Cave National Park and karst features of the Chester Upland and Pennyroyal Plateau. The workshop featured a late-night field trip into Mammoth Cave with Rickard Toomey and Rick Olsen, NPS. The fifth workshop was held April 26–29, 2011, and was a joint meeting of the USGS KIG and University of Arkansas HydroDays, hosted by the Department of Geosciences at the University of Arkansas in Fayetteville. The workshop featured an outstanding field trip to the unique karst terrain along the Buffalo National River of the southern Ozarks and a keynote presentation on paleokarst in the United States by Art and Peggy Palmer. This sixth and current 2014 KIG workshop is hosted by the National Cave and Karst Research Institute (NCKRI) in Carlsbad, New Mexico, with Director of NCKRI, George Veni, serving as co-chair of the workshop with Eve Kuniansky, USGS. The session planning committee for this sixth workshop includes Van Brahana, USGS retired and University of Arkansas Professor Emeritus; Tom Byl, USGS and Tennessee State University; Zelda Bailey, former Director of NCKRI and retired Director, National Institute of Standards and Technology, Boulder Laboratory, Colorado; Patrick Tucci, USGS retired; and Mike Bradley, Allan Clark, Geoff Delin, Daniel Doctor, James Kaufmann, Eve Kuniansky, Randy Orndorff, Larry Spangler, and Dave Weary of the USGS. The karst hydrology field trip on Thursday will be led by Lewis Land (NCKRI karst hydrologist) and the optional Friday field trip on the geology of Carlsbad Caverns National Park will be led by George Veni. The keynote speaker is Dr. Penelope Boston, Director of Cave and Karst Studies at New Mexico Tech, Socorro, and Academic Director at NCKRI, who will address the future of karst research. Additionally, there is a featured presentation “Irish karst and its management,” by Caoimhe Hickey, The Geological Survey of Ireland, preceding a panel discussion on “Collaboration During Times of Limited Resources.” The extended abstracts of USGS authors were peer reviewed and approved for publication by the U.S. Geological Survey. Articles submitted by university researchers and other federal and state agencies did not go through the formal USGS peer review and approval process, and therefore may not adhere to our editorial standards or stratigraphic nomenclature and is not research conducted or data collected by the USGS. However, all articles had at a minimum of two peer reviews, and all articles were edited for consistency of appearance in the published Proceedings. The use of trade, firm or product names in any article is for descriptive purposes only and does not imply endorsement by the U.S. Government. The USGS, Office of Groundwater, provides technical support for the Karst Interest Group website and public availability of the Proceedings from these workshops, and the USGS Groundwater Resources Program funds the publication costs. Finally, the cover illustration is the work of Ann Tihansky, USGS, used since the first KIG workshop in 2000.

Scientific Investigations Report↗