SEARCH · Geology Reports

Results for “Lateral Lines”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

USGS1990

Faults of the central part of the Lewis and Clark line and fragmentation of the Late Cretaceous foreland basin in west-central Montana

The Lewis and Clark line is a prominent zone of strike-slip, dip-slip, and oblique-slip faults that extends from near Wallace, Idaho, to east of Helena, Montana. Faults of this zone have been intermittently active from Middle Proterozoic to Holocene time, and because of numerous tectonic overprints, controversy continues about displacement directions and times of displacement along specific faults. Geologic mapping shows evidence that many principal faults of the Lewis and Clark line, such as the St. Marys-Helena Valley, Bald Butte, Ninemile, and Osburn faults, had right separation or slip that ranged between 28 and 11 km, and this displacement probably occurred during Late Cretaceous time. Other faults, such as the Elevation Mountain, Placer Creek, and Ranch Creek faults, have Late Cretaceous right separations that range between 8 and 3.2 km, and the Mount Sentinel fault zone has between 6.5 and 3 km of right separation of probable Late Cretaceous age. Subsidiary structures of the Lewis and Clark line postdate Paleozoic and Lower Cretaceous rocks and predate Late Cretaceous stocks at some places; subsidiary faults and folds that have age constraints have slip directions compatible with right slip along adjacent, principal faults. Sedimentation patterns of Lower and Upper Cretaceous rocks indicate that faults of the Lewis and Clark line fragmented the foredeep region of the foreland basin into separate northern and southern basins in Late Cretaceous time. The Lower and Upper Cretaceous Blackleaf Formation (Albian and lower Cenomanian) was deposited in a continuous foredeep basin that extended across the Lewis and Clark line from north of the Canadian border to southwestern Montana, a distance of about 450 km. North of the Lewis and Clark line, middle and upper Cenomanian rocks are absent, and a thin sequence of uppermost Cenomanian to Campanian rocks was deposited in a marine environment that changed to a strand-line and continental environment in early Campanian time. South of the Lewis and Clark line, middle and upper Cenomanian deposits are also absent, but a thick sequence of Turonian-to-Campanian rocks was deposited in brackish water and strand-line environments, and during later Campanian time, in a continental environment. In the region between the St. Marys-Helena Valley and Bald Butte faults, a barrier may have formed that served as a local sediment source between foredeep regions in the northern and southern foreland basin during the period 91 to 75 Ma. South of the Bald Butte fault, an extensional tectonic regime contributed to a higher sediment-accumulation rate in the foredeep region along the north border of the southern basin (30 cm/1,000 yr), as compared to lower sediment-accumulation rates (6.9 and 7.8 cm/ 1,000 yr) in the foredeep region of the south part of the northern basin.

Montana↗

USGS2002

Influence of rock composition on the geochemistry of stream and spring waters from mountainous watersheds in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado

The ranges of geochemical baselines for stream and spring waters were determined and maps were constructed showing acid-neutralizing capacity and potential release of total dissolved solids for streams and spring waters for watersheds underlain by each of ten different rock composition types in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado (GMUG). Water samples were collected in mountainous headwater watersheds that have comparatively high precipitation and low evapotranspiration rates and that generally lack extensive ground-water reservoirs. Mountainous headwaters react quickly to changes in input of water from rain and melting snow and they are vulnerable to anthropogenic impact. Processes responsible for the control and mobility of elements in the watersheds were investigated. The geochemistry of water from the sampled watersheds in the GMUG, which are underlain by rocks that are relatively unmineralized, is compared to the geochemistry of water from the mineralized Redcloud Peak area. The water with the highest potential for release of total dissolved solids is from watersheds that are underlain by Paleozoic sedimentary rocks; that high potential is caused primarily by gypsum in those rocks. Water that has the highest acid-neutralizing capacity is from watersheds that are underlain by Paleozoic sedimentary rocks. The water from watersheds underlain by the Mancos Shale has the next highest acid-neutralizing capacity. Water that has the lowest acid-neutralizing capacity is from watersheds that are underlain by Tertiary ash-flow tuff. Tertiary sedimentary rocks containing oil shale, the Mesavede Formation containing coal, and the Mancos Shale all contain pyrite with elevated metal contents. In these mountainous head-water areas, water from watersheds underlain by these rock types is only slightly impacted by oxidation of pyrite, and over-all it is of good chemical quality. These geochemical baselines demonstrate the importance of rock composition in determining the types of waters that are in the headwater areas. The comparison of these geochemical baselines to later geochemical base-lines will allow recognition of any significant changes in water quality that may occur in the future.

Colorado↗

USGS2012

Comparison of soil thickness in a zero-order basin in the Oregon Coast Range using a soil probe and electrical resistivity tomography

Accurate estimation of the soil thickness distribution in steepland drainage basins is essential for understanding ecosystem and subsurface response to infiltration. One important aspect of this characterization is assessing the heavy and antecedent rainfall conditions that lead to shallow landsliding. In this paper, we investigate the direct current (DC) resistivity method as a tool for quickly estimating soil thickness over a steep (33–40°) zero-order basin in the Oregon Coast Range, a landslide prone region. Point measurements throughout the basin showed bedrock depths between 0.55 and 3.2 m. Resistivity of soil and bedrock samples collected from the site was measured for degrees of saturation between 40 and 92%. Resistivity of the soil was typically higher than that of the bedrock for degrees of saturation lower than 70%. Results from the laboratory measurements and point-depth measurements were used in a numerical model to evaluate the resistivity contrast at the soil-bedrock interface. A decreasing-with-depth resistivity contrast was apparent at the interface in the modeling results. At the field site, three transects were surveyed where coincident ground truth measurements of bedrock depth were available, to test the accuracy of the method. The same decreasing-with-depth resistivity trend that was apparent in the model was also present in the survey data. The resistivity contour of between 1,000 and 2,000 Ωm that marked the top of the contrast was our interpreted bedrock depth in the survey data. Kriged depth-to-bedrock maps were created from both the field-measured ground truth obtained with a soil probe and interpreted depths from the resistivity tomography, and these were compared for accuracy graphically. Depths were interpolated as far as 16.5 m laterally from the resistivity survey lines with root mean squared error (RMSE) = 27 cm between the measured and interpreted depth at those locations. Using several transects and analysis of the subsurface material properties, the direct current (DC) resistivity method is shown to be able to delineate bedrock depth trends within the drainage basin.

Oregon↗

USGS2025

Reply to, “Comment on ‘The 1886 Charleston, South Carolina, earthquake: Relic railroad offset reveals rupture,’ by Roger Bilham and Susan E. Hough”

We welcome this opportunity to respond to Pratt et al. (2024) (hereinafter P24). Bilham and Hough (2023) proposed a “first-cut” elastic deformation model for the 1886 earthquake, a quantitative source model constrained by identified coseismic constraints. A key observation was the measurement of a lateral offset of a railroad line south of Summerville, leading to a model with predominately dextral slip and minor convergence, from which we concluded that active faulting had raised the Penholoway Marine Terrace >6 m since ∼770 ka. P24 questioned these constraints and proposed an alternative rupture model with predominantly reverse slip. This alternative model is neither consistent with coseismic constraints nor with other geophysical data. In a revised model presented here, we recognize that uplift of the Penholoway Terrace is confined to the eastern edge of the terrace, which we conclude results from active folding and tectonic transpression centered on the dextral fault that offset the railroad in 1886.

South Carolina↗

USGS1950

Geologic interpretation of seismic data relocation Route 2, Littleton Road grade separation stations 243-252 in Harvard, Mass.

During parts of June and July 1949 nine seismic traverses were made at this site. Upon preliminary office development, the velocity data for some of these traverses were though to be inadequate and it was recommended that these lines be re-surveyed. Later surveys (March 1950), however, of nearby sites indicated that the original data were reliable and that a re-survey was unnecessary. The work was done as part of a cooperative program of the Massachusetts Department of Public Works and the United States Geological Survey.

Massachusetts↗

USGS2000

Lateral ramps in the folded Appalachians and in overthrust belts worldwide— A fundamental element of thrust-belt architecture

Lateral ramps are zones where decollements change stratigraphic level along strike; they differ from frontal ramps, which are zones where decollements change stratigraphic level perpendicular to strike. In the Appalachian Mountains, the surface criteria for recognizing the subsurface presence of lateral ramps include (1) an abrupt change in wavelength or a termination of folds along strike, (2) a conspicuous change in the frequency of mapped faults or disturbed zones (extremely disrupted duplexes) at the surface, (3) long, straight river trends emerging onto the coastal plain or into the Appalachian Plateaus province, (4) major geomorphic discontinuities in the trend of the Blue Ridge province, (5) interruption of Mesozoic basins by cross-strike border faults, and (6) zones of modern and probable ancient seismic activity. Additional features related to lateral ramps include tectonic windows, cross-strike igneous intrusions, areas of giant landslides, and abrupt changes in Paleozoic sedimentation along strike. Proprietary strike-line seismic-reflection profiles cross three of the lateral ramps that were identified by using the surface criteria. The profiles confirm their presence and show their detailed nature in the subsurface. Like frontal ramps, lateral ramps are one of two possible consequences of fold-and-thrust-belt tectonics and are common elements in the Appalachian fold-and-thrust belt. A survey of other thrust belts in the United States and elsewhere strongly suggests that lateral ramps at depth can be identified by their surface effects. Lateral ramps probably are the result of thrust sheet motion caused by continued activation of ancient cratonic fracture systems. Such fractures localized the transform faults along which the continental segments adjusted during episodes of sea-floor spreading.

Pennsylvania↗

USGS1995

Seismic Sources and Recurrence Rates as Adopted by USGS Staff for the Production of the 1982 and 1990 Probabilistic Ground Motion Maps for Alaska and the Conterminous United States

The construction of a probabilistic ground-motion hazard map for a region follows a sequence of analyses beginning with the selection of an earthquake catalog and ending with the mapping of calculated probabilistic ground-motion values (Hanson and others, 1992). An integral part of this process is the creation of sources used for the calculation of earthquake recurrence rates and ground motions. These sources consist of areas and lines that are representative of geologic or tectonic features and faults. After the design of the sources, it is necessary to arrange the coordinate points in a particular order compatible with the input format for the SEISRISK-III program (Bender and Perkins, 1987). Source zones are usually modeled as a point-rupture source. Where applicable, linear rupture sources are modeled with articulated lines, representing known faults, or a field of parallel lines, representing a generalized distribution of hypothetical faults. Based on the distribution of earthquakes throughout the individual source zones (or a collection of several sources), earthquake recurrence rates are computed for each of the sources, and a minimum and maximum magnitude is assigned. Over a period of time from 1978 to 1980 several conferences were held by the USGS to solicit information on regions of the United States for the purpose of creating source zones for computation of probabilistic ground motions (Thenhaus, 1983). As a result of these regional meetings and previous work in the Pacific Northwest, (Perkins and others, 1980), California continental shelf, (Thenhaus and others, 1980), and the Eastern outer continental shelf, (Perkins and others, 1979) a consensus set of source zones was agreed upon and subsequently used to produce a national ground motion hazard map for the United States (Algermissen and others, 1982). In this report and on the accompanying disk we provide a complete list of source areas and line sources as used for the 1982 and later 1990 seismic hazard maps for the conterminous U.S. and Alaska. These source zones are represented in the input form required for the hazard program SEISRISK-III, and they include the attenuation table and several other input parameter lines normally found at the beginning of an input data set for SEISRISK-III.

Open-File Report↗

USGS2000

Meter-Scale Characteristics of Martian Channels and Valleys

Mars Global Surveyor images, with resolutions as high as 1.5 m pixel, enable characterization of martian channels and valleys at resolutions one to two orders of magnitude better than was previously possible. A major surprise is the near-absence of valleys a few hundred meters wide and narrower. The almost complete absence of fine-scale valleys could be due to lack of precipitation, destruction of small valleys by erosion, or dominance of infiltration over surface runoff. V-shaped valleys with a central channel, such as Nanedi Vallis, provide compelling evidence for sustained or episodic flow of water across the surface. Larger valleys appear to have formed not by headward erosion as a consequence of groundwater sapping but by erosion from water sources upstream of the observed sections. The freshest appearing valleys have triangular cross sections, with talus from opposing walls meeting at the center of the valley. The relations suggest that the width of the valleys is controlled by the depth of incision and the angle of repose of the walls. The flat floors of less fresh-appearing valleys result primarily from later eolian fill. Several discontinuous valleys and lines of craters suggest massive subsurface solution or erosion. The climatic implications of the new images will remain obscure until the cause for the scarcity of fine-scale dissection is better understood. ?? 2000 Academic Press.

Icarus↗

USGS1948

The bedding-replacement fluorspar deposits of Spar Valley, Eagle Mountains, Hudspeth County, Texas

The Spar Valley fluorspar district in the Eagle Mountains, Hudspeth County, Texas, is one of the few in the western United States containing bedding-replacement fluorspar deposits. The deposits at Spar Valley resemble the bedding-replacement deposits of the Cave in Rock fluorspar district of southern Illinois. Two distinct deposits, the North and the South ore bodies, are present. The North ore body is larger and has been developed by diamond drilling and mining; the following statements apply chiefly to it.The fluorspar partly replaces a sequence of three sandy limestones interbedded with four calcareous shales in the lower part of the Edwards limestone of Lower Cretaceous age. The fluoritized beds, which dip 40 degrees SW in conformity with underlying limestone, are overlain by thick impermeable gouge along a bedding-plane fault dipping slightly more than 40 degrees SW. The high-grade beds were derived from the sandy limestones, and the low-grade beds, which contain as much as 28 percent of CaF 2 , were formed from the calcareous shales. The selectiveness of replacement by the fluorine-bearing solutions, due to differences in the chemical composition, texture, and degree of brecciation of the original rock, resulted in bedding-replacement deposits of variable fluorite content.A reduction in volume, which accompanied the replacement, led to the development of many cavities. During the later stages of fluoritization these cavities were lined with fluorite crystals, early fluorite grains were coated and interstices between them were filled, and fluorite veins were formed in the ore beds and the underlying dense limestone.

Texas↗

USGS1966

Tectonic creep in the Hayward fault zone, California

Tectonic creep is slight apparently continuous movement along a fault. Evidence of creep has been noted at several places within the Hayward fault zone--a zone trending northwestward near the western front of the hills bordering the east side of San Francisco Bay. D. H. Radbruch of the Geological Survey and B. J. Lennert, consulting engineer, confirmed a reported cracking of a culvert under the University of California stadium. F. B. Blanchard and C. L. Laverty of the East Bay Municipal Utility District of Oakland studied cracks in the Claremont water tunnel in Berkeley. M. G. Bonilla of the Geological Survey noted deformation of railroad tracks in the Niles district of Fremont. Six sets of tracks have been bent and shifted. L. S. Cluff of Woodward-Clyde-Sherard and Associates and K. V. Steinbrugge of the Pacific Fire Rating Bureau noted that the concrete walls of a warehouse in the Irvington district of Fremont have been bent and broken, and the columns forced out of line. All the deformations noted have been right lateral and range from about 2 inches in the Claremont tunnel to about 8 inches on the railroad tracks. Tectonic creep almost certainly will continue to damage buildings, tunnels, and other structures that cross the narrow bands of active movement within the Hayward fault zone.

Circular↗

USGS2011

A beaded collar for dual micro GPS/VHF transmitter attachment to nutria

We report on the development of an approximately 85-g beaded collar for dual micro GPS/VHF transmitter attachment to semi-aquatic nutria (Myocastor coypus). Prototype collars were tested on captive nutria and refined during field trials. Central to the design was novel use of the VHF transmitter antenna as a collar. A circular collar was formed by passing the 44-cm antenna cable through a pre-made hole in the transmitter, leaving an approximately 16-cm upright antenna. GPS units were mounted separately via a hole in the base of each unit. For good satellite contact, GPS units (28 g) were maintained at the nape of the neck by counterbalance of the heavier VHF transmitters (50 g) positioned under the neck. To reduce friction, we lined the collar with alternate-sized plastic and, later, more durable nylon beads. The final collar configuration was worn for approximately 1 month deployments with only minor neck abrasion; one collar was worn successfully for 5 months. Foot entanglement remained the greatest risk of injury from the collar. By fitting collars tightly, we reduced the incidence of foot entanglement to 2 of 33 deployments (6%). Successful GPS tracks were acquired on 29 of 33 deployments (88%).

Mammalia↗

USGS1906

Twenty-seventh annual report of the Director of the United States Geological Survey

During the last fiscal year the character of the work and the organization of the force remained substantially the same as described in the Twenty-sixth Annual Report. Accounts of the work performed in geology and paleontology, chemistry and physics, topography and geography, and hydrography, hydrology, and hydro-economics, as well as in the lines of publication and administration, will be found on later pages. Appropriations and allotments .--A plan of operations, including an itemized statement of the appropriations, amounting to $1,513,482.30, and the allotments thereof, was approved by the Secretary of the Interior on May 15, 1905. The work of the year conformed to this plan, copies of which are on file at the Department and the Survey. State cooperation .--Many of the States, following a well-established policy, cooperated with the National Survey in geologic, topographic, and hydrographic work; details are given on pages 12, 29, 72, and 74.

Annual Report↗

USGS1905

Record of deep-well drilling for 1904

In this report, which is the first of a proposed series of annual publications, are presented the results of the first six months' work by the United States Geological Survey in the systematic collection of well records and samples. Much time having been occupied in organization and preliminary correspondence, the results of only about three months' actual work are included. The report is issued for the purpose of giving to present or prospective well owners and drillers the results of drilling as reported to the Survey, with the object of furnishing them as good a basis as possible for future drilling in the regions discussed, and to afford geologists and others a more complete knowledge of the rock succession and structure. It is intended that the reports of the series shall present records of contemporaneous drilling rather than the results of past work, a special attempt being made to secure records accompanied by samples. The logs of completed wells, however, will be incorporated when practicable; but as records of such wells are seldom preserved for any length of time, their number will probably decrease in proportion to new wells as the work continues. All well records received during the year 1904 that were accompanied by complete sets of samples are presented in this report, as are also a considerable number furnished by drillers, contractors, well owners, etc., representing other completed wells. The report does not, however, include all records furnished the Survey, a great number being furnished by oil companies and others interested in the development of oil or mineral lands. Many of these are confidential and can not be published, while others will be compiled and embodied in reports on special regions, which will be published later.

Bulletin↗

USGS1979

Restored stratigraphic cross sections and coal correlations in the Tongue River member of the Fort Union Formation, Powder River area, Montana

Exposures of the lower two thirds of the Tongue River Member of the Paleocene Fort Union Formation were measured along the Powder River valley in southeastern Montana in the Moorhead and Birney-Broadus coalfields. This report documents the stratigraphic variations, lateral continuity of partly eroded coal beds along the line of section, and shows ten sections for the Tongue River Member in this study area. This report is a companion to the report by Flores and Canavello (1979). The study area represents a linear distance of 35 miles along the Powder River valley and extends from the Wyoming-Montana State line to a point 7 miles southeast of Broadus. Mont. (see index map). Within this area are relatively continuous outcrops of the middle and lower parts of the Tongue River Member.

Montana↗

USGS2024

Monitoring aquifer-storage change from artificial recharge with repeat microgravity along Santa Cruz River, Tucson, Arizona, 2019–22

The City of Tucson water utility, Tucson Water, began releasing treated effluent into the Santa Cruz River channel near downtown Tucson in 2019. This recharge project—the Heritage Project—is intended to create a reach of consistent flow in the channel and recharge water to the aquifer. Tracking the dispersal of recharged water is important for management decisions because groundwater movement depends on spatially variable characteristics of the subsurface and cannot be fully predicted in advance. Groundwater-level measurements in wells are useful, but the relation between water storage and groundwater-level change depends on the unknown storage coefficient of the aquifer. To estimate storage changes caused by recharge of reclaimed effluent released into the channel for the Heritage Project, the U.S. Geological Survey (USGS) collected repeat microgravity data along the Santa Cruz River in Tucson, Arizona, from 2019 to 2022. This method augments groundwater-level monitoring by providing a direct quantitative measurement of changes in the quantity of water stored in the subsurface. Preliminary results of the monitoring through 2022 showed consistent storage increases only near and upstream from the Heritage Project outfall site. Initially high storage increases at some locations west of the channel and in line with Sentinel Peak reached roughly steady state in later times. North of Sentinel Peak, a storage increase from 2020 to 2021 was followed by a storage decrease from 2021 to 2022. Storage changes in the area north of Sentinel Peak appear to be related to the number of days flows in the channel were observed farther downstream from the outfall site (at USGS streamgage 09482500). This observation is likely due to the potential formation of a clogging layer that would allow surface water to disperse farther horizontally (downstream) before infiltrating. This phenomenon has been observed downstream of other recharged effluent projects and has been reduced by large flows in the channel, such as those occurring during large runoff events. There were no large or consistent storage increases near the Water Quality Assurance Revolving Fund (WQARF) sites included in this study area.

Arizona↗

USGS2023

Exploring the geology of the Midcontinent Rift under western Lake Superior using a preliminary velocity model of seismic line GLIMPCE C

Seismic-reflection data were collected in the 1980s as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE) to investigate the 1.1 Ga Midcontinent Rift System (MRS). GLIMPCE Line C crosses western Lake Superior from north to south shores (Fig. 1 inset). Many previous workers have interpreted the MRS in Line C as an asymmetric central graben filled with 10–20 km of subaerial basalt flows, overlain by 7-10 km of sedimentary section, and underlain by magmatic underplating. The central graben was interpreted to have formed from extensional normal faults, later reactivated as high-angle reverse faults. The northern part of Line C crosses over a prominent gravity low called the Grand Marais Ridge (GMR; Fig. 1 inset), previously interpreted as an Archean granitic basement high.

Lake Superior↗

USGS2006

Uplift and subsidence associated with the great Aceh-Andaman earthquake of 2004

Rupture of the Sunda megathrust on 26 December 2004 produced broad regions of uplift and subsidence. We define the pivot line separating these regions as a first step in defining the lateral extent and the downdip limit of rupture during that great Mw ??? 9.2 earthquake. In the region of the Andaman and Nicobar islands we rely exclusively on the interpretation of satellite imagery and a tidal model. At the southern limit of the great rupture we rely principally on field measurements of emerged coral microatolls. Uplift extends from the middle of Simeulue Island, Sumatra, at ??? 2.5??N, to Preparis Island, Myanmar (Burma), at ??? 14.9??N. Thus the rupture is ??? 1600 km long. The distance from the pivot line to the trench varies appreciably. The northern and western Andaman Islands rose, whereas the southern and eastern portion of the islands subsided. The Nicobar Islands and the west coast of Aceh province, Sumatra, subsided. Tilt at the southern end of the rupture is steep; the distance from 1.5 m of uplift to the pivot line is just 60 km. Our method of using satellite imagery to recognize changes in elevation relative to sea surface height and of using a tidal model to place quantitative bounds on coseismic uplift or subsidence is a novel approach that can be adapted to other forms of remote sensing and can be applied to other subduction zones in tropical regions. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS2015

Hydrothermal alteration and diagenesis of terrestrial lacustrine pillow basalts: Coordination of hyperspectral imaging with laboratory measurements

We investigate an outcrop of &sim;187 Ma lacustrine pillow basalts of the Talcott Formation exposed in Meriden, Connecticut, USA, focusing on coordinated analyses of one pillow lava to characterize the aqueous history of these basalts in the Hartford Basin. This work uses a suite of multidisciplinary measurements, including hyperspectral imaging, other spectroscopic techniques, and chemical and mineralogical analyses, from the microscopic scale up to the scale of an outcrop. The phases identified in the sample are albite, large iron oxides, and titanite throughout; calcite in vesicles; calcic clinopyroxene, aegirine, and Fe/Mg-bearing clay in the rind; and fine-grained hematite and pyroxenes in the interior. Using imaging spectroscopy, the chemistry and mineralogy results extend to the hand sample and larger outcrop. From all of the analyses, we suggest that the pillow basalts were altered initially after emplacement, either by heated lake water or magmatic fluids, at temperatures of at least 400-600°C, and the calcic clinopyroxenes and aegirine identified in the rind are a preserved record of that alteration. As the hydrothermal system cooled to slightly lower temperatures, clays formed in the rind, and, during this alteration, the sample oxidized to form hematite in the matrix of the interior and Fe 3+ in the pyroxenes in the rind. During the waning stages of the hydrothermal system, calcite precipitated in vesicles within the rind. Later, diagenetic processes albitized the sample, with albite replacing plagioclase, lining vesicles, and accreting onto the exterior of the sample. This albitization or Na-metasomatism occurred when the lake within the Hartford Basin evaporated during a drier past climatic era, resulting in Na-rich brines. As Ca-rich plagioclase altered to albite, Ca was released into solution, eventually precipitating as calcite in previously-unfilled vesicles, dominantly in the interior of the pillow. Coordinated analyses of this sample permit identification of the alteration phases and help synthesize the aqueous history of pillow lavas of the Talcott formation. These results are also relevant to Mars, where volcanically-resurfaced open basin lakes have been found, and this Hartford Basin outcrop may be a valuable analog for any potential volcano-lacustrine interactions. The results can also help to inform the utility and optimization of potentially complementary, synergistic, and uniquely-suited techniques for characterization of hydrothermally-altered terrains.

Connecticut↗