Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of the Mechanics and Physics of Solids”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,261 records · Page 3Linked to original sources
USGS2026

Predictable seismic cycles result from structural rupture barriers on oceanic transform faults

Earthquakes of magnitude ( M ) >5.5 on oceanic transform faults (OTFs) repeatedly rupture the same locked patches, sometimes quasiperiodically. These patches are separated by “barriers” that halt earthquake propagation and slip mostly aseismically. However, the physical processes governing this systematic behavior remain unclear. We analyzed two barriers along the Gofar transform fault that have arrested ~15 M 6 earthquakes over the past three decades. Ocean bottom seismometer data indicate that the barriers hosted intense microseismicity before the mainshocks and comprise multistrand faults and transtensional stepovers with 100- to 400-m lateral offset. These characteristics contradict earthquake rupture termination models invoking velocity-strengthening friction or large geometric steps and instead point to damage-enhanced porosity and dilatancy-strengthening mechanisms. By isolating rupture segments, the barriers regulate the quasiperiodic recurrence of OTF earthquakes.

Science↗
USGS2025

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology↗
USGS2025

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench↗
USGS2025

Rapid fault healing from cementation controls the dynamics of deep slow slip and tremor

Despite its status as one of the most important discoveries in geophysics, the physical mechanism(s) responsible for slow slip events (SSEs) are not well understood. Here, we synthesize observations of deep SSEs in the Cascadia Subduction Zone and argue that rapid, cohesive fault strengthening may control the dynamics of deep SSEs. Cohesive strength is frequently ignored in constitutive laws used to describe fault rheology in numerical simulations of earthquakes and SSEs alike. To demonstrate its importance, we perform and analyze a suite of petrological experiments that simulate fault healing under representative pressure and temperature conditions. We show that significant cohesive strength recovery caused by dissolution-precipitation processes occurs on timescales of just a few hours. Together, our experimental and observational results support the idea that cohesion is a key component of fault strength under SSE conditions and highlight the need for its inclusion in both future experiments and numerical models of fault slip.

British Columbia, Washington↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS2026

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota↗
USGS2025

Quality of groundwater used for domestic supply in the Gilroy-Hollister basin and surrounding areas, California, 2022

More than 2 million Californians rely on groundwater from domestic wells for drinking-water supply. This report summarizes a 2022 California Groundwater Ambient Monitoring and Assessment Priority Basin Project (GAMA-PBP) water-quality survey of 33 domestic and small-system drinking-water supply wells in the Gilroy-Hollister Valley groundwater basin and the surrounding areas, where more than 20,000 residents are estimated to utilize privately owned domestic wells. The study area includes the Llagas subbasin in the north, the North San Benito subbasin in the south, and the surrounding uplands. The study was focused on groundwater resources used for domestic drinking-water supply, which are mostly drawn from shallower parts of aquifer systems rather than those of groundwater resources used for public drinking-water supply in the same area. This assessment characterized the quality of ambient groundwater in the aquifer before filtration or treatment, rather than the quality of drinking water delivered to the tap. To provide context, the measured concentrations of constituents in groundwater were compared to Federal and California State regulatory and non-regulatory benchmarks for drinking-water quality. A grid-based method was used to estimate the areal proportions of groundwater resources used for domestic drinking wells that have water-quality constituents present at high concentrations (above the benchmark), moderate concentrations (between one-half of the benchmark and the benchmark for inorganic constituents, or between one-tenth of the benchmark and the benchmark for organic constituents), and low concentrations (less than one-half or one-tenth the benchmark for inorganic and organic constituents, respectively). This method provides statistically representative results at the study-area scale and permits comparisons to other GAMA-PBP study areas. In the study area, inorganic constituents in groundwater were greater than regulatory benchmarks (U.S. Environmental Protection Agency [EPA] or State of California maximum contaminant levels [MCLs]) for public drinking-water quality in 24 percent of domestic groundwater resources. The inorganic constituents present at concentrations greater than MCLs for drinking water were nitrate (as nitrogen), barium, chromium, and selenium. Total dissolved solids (TDS) or manganese were present at concentrations greater than the secondary maximum contaminant levels (SMCLs) that the State of California uses as aesthetic-based benchmarks in 48 percent of domestic groundwater resources. No volatile organic compounds or pesticide constituents were present at concentrations greater than regulatory benchmarks. Total coliform bacteria and enterococci were detected in 4 percent of domestic groundwater resources. Per- and polyfluoroalkyl substances (PFAS) were detected in 19 percent of domestic groundwater resources, and 10 percent had concentrations greater than recently enacted (April 2024) EPA MCLs. Physical and chemical factors from natural and anthropogenic sources that could affect the groundwater quality were evaluated using results from statistical testing of associations between constituent concentrations and potential explanatory variables. In this study, relevant physical factors include well construction characteristics, groundwater age, site proximity to groundwater recharge or discharge zones, and potential sources of contamination. Relevant chemical factors include the initial chemistry of the recharge water, the mineralogy of the aquifer sediments, and the subsequent shifts in chemistry as biologic and geologic reactions alter groundwater in the subsurface. Nitrate concentrations were correlated to agricultural land use, distance from the boundary of the Gilroy-Hollister Valley groundwater basin, and the proportion of modern (post-1950s) water captured by the well. Denitrification under anoxic redox conditions can mitigate some nitrate derived from fertilizer application. Total dissolved solids primarily were derived from water-rock interactions with soils and aquifer materials in the study area, but there were high concentrations where agricultural practices contributed additional TDS. Mineralogy of aquifer sediments and rocks also affect barium, selenium, boron, and chromium concentrations in the Gilroy-Hollister Valley groundwater basin. PFAS were positively correlated with urban land use and the proportion of modern water captured by the well.

California↗
USGS2026

Determination of baseline water-quality conditions using continuous specific conductance and discrete measurements of total dissolved solids and selected major ions, Arkansas River Basin, Colorado

From 2022 through 2024, the U.S. Geological Survey (USGS) in cooperation with the Regional Resources Planning Group (Southeastern Colorado Water Conservancy District, Colorado Springs Utilities, Pueblo Water, Lower Arkansas Valley Water Conservancy District, Aurora Water, and Upper Arkansas Water Conservancy District) established a basinwide water-quality monitoring network in the Arkansas River Basin in Colorado. The study leveraged ongoing continuous measurements of streamflow and specific conductance (SC) at 13 sites along the main stem Arkansas River and Fountain Creek from the USGS 07108600 Arkansas River at Granite, Colo., (Ark Granite) site to the USGS 07137500 Arkansas River near Coolidge, Kansas, (Ark Coolidge) site. Baseline water-quality conditions were established using data from October 1989 through September 2022 to help identify changes in water quality that could result from changes in land and water use. Total dissolved solids (TDS) concentration was the main indicator of general water quality in this study because it can be accurately estimated from SC and is sensitive to changes in streamflow, water operations, and source contributions. Median TDS concentrations in Arkansas River samples (October 1989 through December 2023) ranged from 75 milligrams per liter (mg/L) at Ark Granite near the headwaters to 3,660 mg/L at Ark Coolidge near the Colorado–Kansas State line. Distinct seasonal differences in median streamflow and TDS were apparent during the winter and summer months. Seasonal Kendall tests showed no significant trends in monthly mean streamflow (October 1995 through September 2022) at Arkansas River sites upstream from Pueblo Reservoir. Upward trends in TDS concentrations and loads occurred only at Ark Granite. Downward trends in streamflow, TDS concentrations, and TDS loads occurred at Arkansas River sites from USGS 07109500 Arkansas River near Avondale, Colo., to Ark Coolidge. Downward trends in streamflow and SC (surrogate for TDS) were more prevalent during winter base flow months and may indicate changes in groundwater quantity, and possibly groundwater quality, potentially affecting the river water-quality condition.

Colorado↗
USGS2024

Editorial: From cold seeps to hydrothermal vents: Geology, chemistry, microbiology, and ecology in marine and coastal environments

This Research Topic compiles contemporary studies on cold seeps, hydrothermal vents, mud volcanoes, and related seafloor features that are associated with focused fluid emissions and the transfer of carbon, other chemical species, and sometimes heat from the geosphere to the ocean. Because these features sometimes tap fluids and gas originating kilometers below the seafloor, they provide an important window into deep processes that are otherwise inaccessible to scientists. At the shallow portion of their journey, migrating fluids nearing the seafloor contribute to a range of unique biological, physical, and chemical processes within the sediments themselves and at the sediment-water interface. Seafloor fluid emissions play a critical role in global biogeochemical cycles, ocean chemistry, and possibly even climate change. Seafloor leakage points often emit hydrocarbon gases (especially methane and CO 2 ) and are sometimes the loci for deposition of seafloor minerals that have economic value. A burgeoning area of research focuses on natural products generated at these features, seeking compounds with potential pharmaceutical or other applications. Multidisciplinary studies have become routine for characterization of seafloor fluid emission sites, attesting to the inseparability of geologic, physical, chemical, and biological processes in these settings. It is increasingly common for researchers to combine in a single research cruise: subbottom imaging and seafloor mapping; porewater and water column geochemistry and gas sampling; sediment retrieval for lithologic, biostratigraphic, and solid phase analyses; and studies of benthic and subseafloor communities at the microbial to macrofaunal scales. This multidisciplinary approach has the advantage of ensuring the spatial and temporal coincidence of surveys and samples, an important factor at highly dynamic seafloor fluid emission sites. In addition, researchers often use remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or human-occupied vehicles (HOVs) to record video of the seafloor, compile photomosaics, collect targeted samples, and survey with high-resolution geophysical near-seafloor systems, providing a degree of detail about seafloor fluid emission sites that is unprecedented compared to most areas of the deep ocean. While rarer, long-term cabled observatories or shorter-term deployments of portable observatories are also used at some loci for seafloor fluid flux and are particularly helpful for capturing temporal variations at these dynamic features. Here we summarize the Research Topic’s contribution to multidisciplinary seafloor emission studies in the categories of cold seeps, mud volcanoes, and hydrothermal vents. Figure 1 shows the geographic distribution of the studies in this Research Topic and key features referred to in this Introduction.

Frontiers in Earth Science↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS2025

No evidence for an active margin-spanning megasplay fault at the Cascadia Subduction Zone

It has been previously proposed that a megasplay fault within the Cascadia accretionary wedge, spanning from offshore Vancouver Island to Oregon, has the potential to slip during a future Cascadia subduction zone earthquake. This hypothetical fault has major implications for tsunami size and arrival times and is included in disaster-planning scenarios currently in use in the region. This hypothesis is evaluated in this study using CASIE21 deep-penetrating and U.S. Geological Survey high-resolution seismic reflection profiles. We map changes in wedge structural style and seismic character to identify the inner-outer wedge transition zone where a megasplay fault has been previously hypothesized to exist and evaluate evidence for active faulting within this zone. Our results indicate that there is not an active, through-going megasplay fault in Cascadia, but instead, the structure and activity of faulting at the inner-outer wedge transition zone is highly variable and segmented along strike, consistent with the segmentation of other physical and mechanical properties in Cascadia. Wedge sedimentation, plate dip, and subducting topography are proposed to play a major role in controlling megasplay fault development and evolution. Incorporating updated megasplay fault location, geometry, and activity into modeling of Cascadia earthquakes and tsunamis could help better constrain associated hazards.

British Columbia, Oregon, Washington↗
USGS2025

Evidence for nonlocal sediment transport on hillslopes from fault scarp morphology

Hillslope sediment transport processes such as bioturbation, rainsplash, and granular mechanics occur across the entire planet. Yet, it remains uncertain how these small-scale processes act together to shape landscapes. Longstanding hillslope diffusion theory posits that hillslope processes are spatially limited, whereas new concepts of nonlocal sediment transport argue otherwise. However, each theory produces subtly different, but distinct, predictions for the evolution of fault scarps. We use the topographic change of fault scarps to demonstrate that hillslope processes produce nonlocal sediment transport. Analysis of a global compilation of 340 dated single-earthquake scarp profiles reveals a statistically significant ( p < 0.05 ) relationship between scarp age and scarp asymmetry, here defined as the ratio of imaginary to real components of the Fourier transform of absolute slope. Numerical simulations show that nonlocal models predict this relationship, whereas hillslope diffusion models do not. To further investigate this result, we examined the depositional geometry of a well-exposed colluvial wedge along the Wasatch fault in central Utah, United States. Our quantitative comparison between the exposure and numerical simulations reveals better agreement with the nonlocal model. Nonlocal sediment transport theory appears to best capture the physics of how hillslope processes shape fault scarps, yet hillslope diffusion provides a useful approximation in many cases. As the processes that act on fault scarps are nearly identical to those acting on hillslopes, our results provide evidence supporting nonlocality as a generalized model of hillslope sediment transport.

Utah↗
USGS2025

Cascading land surface hazards as a nexus in the Earth system

Earth’s surface is sculpted by numerous processes that move sediment, ranging from gradual and benign to abrupt and catastrophic. Although infrequent, high-magnitude sediment mobilization events can be hazardous to people and infrastructure, leaving topographic imprints on the landscape and remarkable narratives in the historical record. Hazardous events such as fires, storms, and earthquakes accelerate erosion and sediment transport, increasing landscape sensitivity to subsequent perturbations, thus forming a cascading hazard. Although the redistribution of sediment across Earth’s landscape can result in higher risks to vulnerable populations, cascading processes are commonly unaccounted for in hazard assessments. Cascading hazards can occur almost immediately after triggering events, such as coseismic landslides, or over months, years, or even decades after an initial perturbation, such as debris flows after wildfires or flooding in channels alluviated by volcanic debris. Sediment cascades span Earth’s surface, from mountaintops to river valleys, where erosion, deposition, and aggradation can lead to a myriad of hazardous processes, including decreased river conveyance capacity, which increases the likelihood of downstream flooding. An improved understanding of the magnitude, frequency, and persistence of cascading hazards is critical given the rapid changes in the frequency and severity of storms, fires, sea-level change, and cryospheric melting, as well as the expansion of high-population-density urban footprints in regions susceptible to solid Earth hazards. Understanding the full consequences and underlying physics of Earth’s cascading land surface hazards can help minimize future human and economic losses.

California↗
USGS2026

Selected water-quality data from the Cedar River and Cedar Rapids well fields, Cedar Rapids, Iowa, 2017–22

The Cedar River alluvial aquifer is the source of drinking water in Cedar Rapids, Iowa. Production wells are completed in the alluvial aquifer approximately 40 to 80 feet below land surface. The City of Cedar Rapids and the U.S. Geological Survey have studied the groundwater-flow system and water quality of the aquifer in the vicinity of Cedar Rapids since 1992. Results of these studies documented hydrologic conditions, water quality, and geochemistry of the alluvial aquifer and interactions with the Cedar River. Water-quality samples were collected for studies involving well field monitoring, trends, source-water protection, groundwater geochemistry, surface-water–groundwater interaction, and pesticides in groundwater and surface water. Water quality was analyzed for dissolved major ions (boron, bromide, calcium, chloride, fluoride, iron, magnesium, manganese, potassium, silica, sodium, sulfate, and total dissolved solids), dissolved nutrients (ammonia as nitrogen, ammonia plus organic nitrogen as nitrogen, nitrite plus nitrate as nitrogen, nitrite as nitrogen, orthophosphate as phosphorus, and phosphorus), dissolved organic carbon, and selected pesticides. Physical characteristics (alkalinity, dissolved oxygen, pH, specific conductance, and water temperature) were measured on site and recorded for each water sample collected. This report presents the results of routine water-quality data-collection activities from October 2017 through September 2022. Methods of data collection, quality assurance, water-quality analyses, and statistical procedures are presented. Data include the results of water-quality analyses from quarterly sampling from monitoring wells, production wells, two water treatment plants, and the Cedar River at Blairs Ferry Road at Palo, Iowa, streamgage (U.S. Geological Survey station number 05464420), as well as monthly nutrient sampling from the Cedar River and Morgan Creek near Covington, Iowa, streamgage (U.S. Geological Survey station number 05464475).

Iowa↗
USGS2026

pySATSI: A Python package for computing focal mechanism stress inversions

We introduce pySATSI, a Python package for computing earthquake focal mechanism stress inversions. This algorithm can handle a wide variety of types of stress inversion problems with a single script and can duplicate many capabilities of preceding methodologies. We also add new capabilities that include spatiotemporally variable inversion grids, damped stress estimates for clusters with few or no focal mechanisms, and variable fault‐plane ambiguities that the user can assign to individual events. In addition, we added the ability to use damped stress inversions with fault‐plane ambiguity probabilities that are weighted by fault instabilities. Our algorithm is computationally efficient with faster runtimes than previous algorithms, scales well for large datasets, and can be easily parallelized.

Seismological Research Letters↗
USGS2025

S/P amplitude ratios with Distributed Acoustic Sensing and application to earthquake focal mechanisms

Distributed acoustic sensing (DAS), which transforms a fiber optic cable into an array of high frequency strainmeters, has the potential to help us characterize earthquakes with a dense sampling of measurements. While earthquake focal mechanisms are frequently determined using P -wave polarities and S / P amplitude ratios with inertial seismometers, the dense sampling of DAS over potentially large portions of the focal sphere can aid our solutions. Here, we consider ∼200 regional earthquakes and thousands of S / P measurements on a DAS cable colocated with a network of inertial seismometers near Arcata, California. We demonstrate the S / P ratio measurements made on DAS are similar to those made on the inertial seismometers and can be used to constrain focal mechanism solutions.

California↗
USGS2025

A glimpse into the future of tectonic tremor monitoring

Tectonic tremor is a weak, long-duration seismic signal often observed in subduction zones and on some other plate-bounding faults. Because of tremor's characteristically low amplitude (and low signal-to-noise) and lack of clear phase arrivals, detecting and locating tremor usually requires techniques distinct from those applied to typical earthquakes. Major advances in detection and understanding of tremor have derived in the past from a powerful combination of new data and new analysis techniques. In a recent study, Sagae et al. (2025, https://doi.org/10.1029/2025jb031348 ) exploit that combination again, developing a new machine-learning based workflow and applying it to the S-net cabled seismic network in the Japan trench offshore northern Honshu. Their approach, although complex, succeeds in detecting several times more tremor activity than earlier studies, resulting in new insights and providing a blueprint for similar approaches that could be applied elsewhere. As real-time earthquake monitoring adopts similar tools, it may present an opportunity to bring tremor monitoring into operational workflows. In turn, this could solidify tremor monitoring as a component of future operational earthquake forecasting.

JGR Solid Earth↗