Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Navigation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific Continental Margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1987

Effect of brief navigation-related dewaterings on fish eggs and larvae

Short-term dewatering of nearshore spawning areas often occurs during passage of commercial tows in the upper Mississippi River as well as in other navigated river systems. This phenomenon was examined experimentally to identify potential effects on survival of fish eggs and larvae. Early life stages of walleyes ( Stizostedion vitreum vitreum ) and northern pike ( Esox lucius ) were dewatered 2 min in laboratory studies at intervals of either 1, 3, 6, or 12 h from just after fertilization to 10-14 d posthatch. Dewatering did not cause mortality of eggs, but significant mortality of larvae of both species occurred at dewatering frequencies of 1 or 3 h. Therefore, significant mortality first was observed at a frequency equivalent to a mean passage of eight tows per day.

upper Mississippi River↗
USGS2017

Measuring fish and their physical habitats: Versatile 2D and 3D video techniques with user-friendly software

Applications of video in fisheries research range from simple biodiversity surveys to three-dimensional (3D) measurement of complex swimming, schooling, feeding, and territorial behaviors. However, researchers lack a transparently developed, easy-to-use, general purpose tool for 3D video measurement and event logging. Thus, we developed a new measurement system, with freely available, user-friendly software, easily obtained hardware, and flexible underlying mathematical methods capable of high precision and accuracy. The software, VidSync, allows users to efficiently record, organize, and navigate complex 2D or 3D measurements of fish and their physical habitats. Laboratory tests showed submillimetre accuracy in length measurements of 50.8 mm targets at close range, with increasing errors (mostly <1%) at longer range and for longer targets. A field test on juvenile Chinook salmon ( Oncorhynchus tshawytscha ) feeding behavior in Alaska streams found that individuals within aggregations avoided the immediate proximity of their competitors, out to a distance of 1.0 to 2.9 body lengths. This system makes 3D video measurement a practical tool for laboratory and field studies of aquatic or terrestrial animal behavior and ecology.

Canadian Journal of Fisheries and Aquatic Sciences↗
USGS2009

Social, political, and institutional setting: Water management problems of the Rio Grande

This paper discusses various water management issues facing federal, state, and local agencies charged with managing the water resources of the Rio Grande River Basin and its major tributaries. The Rio Grande - 3,058 km (=1,900 mi) long - is the fourth longest river in the United States. The river's basin is 870,236 km 2 (=336,000 mi 2 ) and for roughly two-thirds of its length it forms the United States-Mexican border. It is a major recreational resource providing world class trout fishing near its headwaters in Colorado's San Juan Mountains and shoreline, angling, and boating opportunities near the Colorado-New Mexico border. The Rio Grande is the principal tourist attraction of Big Bend National Park and flows through downtown Albuquerque and El Paso. Many reaches are wide and broad, but almost all are relatively shallow and not navigable by commercial ships. Nevertheless, it is one of the most important renewable water resources of the southwestern United States and North America. The issue of the "manageability" of the river in the face of social forces and disparate administrative jurisdictions that adversely impact Rio Grande flows is a thread linking various sections of the paper together. The length of the river; the fact that major reaches lie in Colorado, New Mexico, and Texas; and its unique role as an international boundary pose complex management problems. The allocation status quo formed by the complex nexus of existing river laws make it difficult to reshape Rio Grande management. ?? 2009 ASCE.

Journal of Water Resources Planning and Management↗
USGS2001

Patterns in abundance of fishes in main channels of the upper Mississippi River system

Abundance of fishes of the main channels of the upper Mississippi River system and of other large North American rivers is largely unknown because historic sampling methods have been inadequate. We used a bottom trawl to estimate spatial and temporal patterns in abundance in the navigation channels of Pool 26 of the Mississippi River and the lower Illinois River. Total biomass density averaged 21 and 29 kg&middot;ha -1 in the navigation channels of Pool 26 and the lower Illinois River, respectively. We identified spatial and temporal patterns in catches of key species using a generalized linear model based on the negative binomial distribution. Some species, including shovelnose sturgeon (Scaphirhynchus platorynchus), are persistent residents of the main channel. Multiple-season residents, including freshwater drum (Aplodinotus grunniens), rely heavily on the main channel during most of the year but leave it briefly, for example to seek thermal refugia in backwaters during winters. We suggest revision of the prevailing notion that main channels of large temperate rivers serve mainly as corridors for movement among other habitat types.

Mississippi River↗
USGS2004

Imaging fall Chinook salmon redds in the Columbia River with a dual-frequency identification sonar

We tested the efficacy of a dual-frequency identification sonar (DIDSON) for imaging and enumeration of fall Chinook salmon Oncorhynchus tshawytscha redds in a spawning area below Bonneville Dam on the Columbia River. The DIDSON uses sound to form near-video-quality images and has the advantages of imaging in zero-visibility water and possessing a greater detection range and field of view than underwater video cameras. We suspected that the large size and distinct morphology of a fall Chinook salmon redd would facilitate acoustic imaging if the DIDSON was towed near the river bottom so as to cast an acoustic shadow from the tailspill over the redd pocket. We tested this idea by observing 22 different redds with an underwater video camera, spatially referencing their locations, and then navigating to them while imaging them with the DIDSON. All 22 redds were successfully imaged with the DIDSON. We subsequently conducted redd searches along transects to compare the number of redds imaged by the DIDSON with the number observed using an underwater video camera. We counted 117 redds with the DIDSON and 81 redds with the underwater video camera. Only one of the redds observed with the underwater video camera was not also documented by the DIDSON. In spite of the DIDSON's high cost, it may serve as a useful tool for enumerating fall Chinook salmon redds in conditions that are not conducive to underwater videography.

North American Journal of Fisheries Management↗
USGS2002

Relations between soil moisture and satellite vegetation indices in the U.S. Corn Belt

Satellite-derived vegetation indices extracted over locations representative of midwestern U.S. cropland and forest for the period 1990–94 are analyzed to determine the sensitivity of the indices to neutron probe soil moisture measurements of the Illinois Climate Network (ICN). The deseasoned (i.e., departures from multiyear mean annual cycle) soil moisture measurements are shown to be weakly correlated with the deseasoned full resolution (1 km × 1 km) normalized difference vegetation index (NDVI) and fractional vegetation cover (FVC) data over both land cover types. The association, measured by the Pearson-moment-correlation coefficient, is stronger over forest than over cropland during the growing season (April–September). The correlations improve successively when the NDVI and FVC pixel data are aggregated to 3 km × 3 km, 5 km × 5 km, and 7 km × 7 km areas. The improved correlations are partly explained by the reduction in satellite navigation errors as spatial aggregation occurs, as well as the apparent scale dependence of the NDVI–soil moisture association. Similarly, stronger relations are obtained with soil moisture data that are lagged by up to 8 weeks with respect to the vegetation indices, implying that soil moisture may be a useful predictor of warm season satellite-derived vegetation conditions. This study suggests that a “long-term” memory of several weeks is present in the near-surface hydrological characteristics, especially soil water content, of the Midwest Corn Belt. The memory is integrated into the satellite vegetation indices and may be useful for predicting crop yield estimates and surface temperature anomalies.

Journal of Hydrometeorology↗
USGS2018

Investigating the mixing efficiencies of liquid-to-liquid chemical injection manifolds for aquatic invasive species management

Aquatic invasive species (AIS) have spread throughout the United States via major rivers and tributaries. Locks and dams positioned along affected waterways, specifically lock chambers, are being evaluated as potential management sites to prevent further expansion into new areas. Recent research has shown that infusion of chemicals (e.g., carbon dioxide) into water can block or kill several invasive organisms and could be a viable option at navigational structures such as lock chambers because chemical infusion would not interfere with vessel passage or lock operation. Chemical treatments near lock structures will require large-scale fluid-mechanic systems and significant energy. Mixing must extend to all stagnation regions within a lock structure to prevent the passage of an invasive fish. This work describes the performance of both wall- and floor-based CO 2 -infused-water to water injection manifolds targeted for lock structures in terms of mixing time, mixing homogeneity, injection efficiency, and operational power requirements. Both systems have strengths and weaknesses so selection recommendations are given for applications such as open systems and closed systems.

Journal of Fluids Engineering↗
USGS2023

Adult Sea Lamprey approach and passage at the Milford Dam fishway, Penobscot River, Maine, United States

Objective Sea Lamprey Petromyzon marinus provide important ecological services within their native range, such as nutrient cycling, and can also act as a prey source for other species. Adult Sea Lamprey must access freshwater rivers to spawn, and because of this they are susceptible to changes in river connectivity. Human-made structures, such as dams, can exclude them from usable habitat. Sea Lamprey dam passage has not been extensively studied in Maine, despite Maine being within the native range of this species. The goals of this study were to evaluate upstream passage efficiency at the Milford Dam on the Penobscot River, Maine, and to provide comprehensive information about adult Sea Lamprey passage at five other dams throughout the Penobscot River watershed. Methods In 2020–2021 we captured and tagged 150 Sea Lamprey at the Milford Dam, the lowest dam in the Penobscot River, Maine, and displaced them downstream to assess passage efficiency at this dam and five upstream dams. In 2020, 50 Sea Lamprey were released on the east shore of the river downstream of Milford Dam; in 2021, the east shore release was repeated with an additional 50 fish and another 50 fish were released on the west shore. Result Between 70–82% of Sea Lamprey were observed passing Milford Dam again after mean delay times of 9–11 days. The release location did not affect dam passage success or the amount of time that was required to locate and use the passage structures. Sea Lampreys from both release groups were equally likely to approach the entrance to the fishway upon returning to Milford Dam, despite the fishway being located against the eastern shore of the river. However, high flows shortly after release may have resulted in higher attraction to the fishway in 2020. Passage success at dams upstream of Milford was highly variable. All Sea Lamprey were able to successfully navigate past West Enfield Dam (100% passage, n = 63), whereas Brownsmill Dam apparently acted as a complete barrier to further migration (0% passage, n = 7). Fish from all years and release groups together had a median upstream migration distance of 38.8 km after fish had passed Milford Dam, and a maximum observed upstream travel distance of approximately 100 km, indicating that most tagged Sea Lamprey ended their migration in the vicinity of a dam. Conclusion The results of this study indicate that Sea Lamprey have high passage efficiency at the Milford Dam and highlight areas within the Penobscot River basin—such as the Brownsmill Dam—where passage facilities are currently inadequate for Sea Lamprey.

Maine↗
USGS2025

Between a rock and a hard place: Experiences of the chronic wasting disease management community

Chronic wasting disease (CWD) is a widespread and incurable cervid disease. Despite continuing investments, the logistical challenges of CWD have required wildlife managers and researchers to navigate changing priorities with conflicting public perceptions. When overcoming difficult management problems, leveraging exploratory methods may identify previously unrecognized hypotheses. In this study, we interviewed wildlife managers and researchers to describe the diverse experiences of experts in the CWD management community. Our study asked about common management strategies used, challenges experienced, and attempted to understand how decision-making in CWD management is shaped and constrained. Our study participants experienced a wide range of constraining factors, primarily related to external influences. We also identified connections between these constraints and a common concern for staff and public burnout. The results of this study provide insight on constraints limiting CWD management success and possible explanations for some commonly recognized challenges resulting from social and ecological interactions.

Journal of Society and Natural Resources↗
USGS2006

Spirit rover localization and topographic mapping at the landing site of Gusev crater, Mars

By sol 440, the Spirit rover has traversed a distance of 3.76 km (actual distance traveled instead of odometry). Localization of the lander and the rover along the traverse has been successfully performed at the Gusev crater landing site. We localized the lander in the Gusev crater using two-way Doppler radio positioning and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were used to verify the determined lander position. Visual odometry and bundle adjustment technologies were applied to compensate for wheel slippage, azimuthal angle drift, and other navigation errors (which were as large as 10.5% in the Husband Hill area). We generated topographic products, including 72 ortho maps and three-dimensional (3-D) digital terrain models, 11 horizontal and vertical traverse profiles, and one 3-D crater model (up to sol 440). Also discussed in this paper are uses of the data for science operations planning, geological traverse surveys, surveys of wind-related features, and other science applications.

Journal of Geophysical Research E: Planets↗
USGS2023

Sound and sturgeon: Bioacoustics and anthropogenic sound

Sturgeons are basal bony fishes, most species of which are considered threatened and/or endangered. Like all fishes, sturgeons use hearing to learn about their environment and perhaps communicate with conspecifics, as in mating. Thus, anything that impacts the ability of sturgeon to hear biologically important sounds could impact fitness and survival of individuals and populations. There is growing concern that the sounds produced by human activities (anthropogenic sound), such as from shipping, commercial barge navigation on rivers, offshore windfarms, and oil and gas exploration, could impact hearing by aquatic organisms. Thus, it is critical to understand how sturgeon hear, what they hear, and how they use sound. Such data are needed to set regulatory criteria for anthropogenic sound to protect these animals. However, very little is known about sturgeon behavioral responses to sound and their use of sound. To help understand the issues related to sturgeon and anthropogenic sound, this review first examines what is known about sturgeon bioacoustics. It then considers the potential effects of anthropogenic sound on sturgeon and, finally identifies areas of research that could substantially improve knowledge of sturgeon bioacoustics and effects of anthropogenic sound. Filling these gaps will help regulators establish appropriate protection for sturgeon.

The Journal of the Acoustical Society of America↗
USGS2003

Mars Exploration Rover engineering cameras

In January 2004 the Mars Exploration Rover mission will land two rovers at two different landing sites that show possible evidence for past liquid‐water activity. The spacecraft design is based on the Mars Pathfinder configuration for cruise and entry, descent, and landing. Each of the identical rovers is equipped with a science payload of two remote‐sensing instruments that will view the surrounding terrain from the top of a mast, a robotic arm that can place three instruments and a rock abrasion tool on selected rock and soil samples, and several onboard magnets and calibration targets. Engineering sensors and components useful for science investigations include stereo navigation cameras, stereo hazard cameras in front and rear, wheel motors, wheel motor current and voltage, the wheels themselves for digging, gyros, accelerometers, and reference solar cell readings. Mission operations will allow commanding of the rover each Martian day, or sol, on the basis of the previous sol's data. Over a 90‐sol mission lifetime, the rovers are expected to drive hundreds of meters while carrying out field geology investigations, exploration, and atmospheric characterization. The data products will be delivered to the Planetary Data System as integrated batch archives.

Journal of Geophysical Research E: Planets↗
USGS2024

Applying local and global sensitivity analysis to inform bigheaded carp management

Natural resource managers commonly use population-level models to aid in understanding the status of target populations or the potential implications of management actions. Sensitivity analyses, specifically, local sensitivity analysis (LSA) and global sensitivity analysis (GSA), exist as tools to improve understanding of these models, the importance of specific parameters to model outcomes, and the assumptions inherent to population models. However, applied ecology and closely related fields such as fisheries and wildlife management rarely use LSA or GSA. Here, we apply LSA and GSA to the Spatially Explicit Invasive Carp Population model, a population-level model used to simulate and compare management actions on the invasive silver carp Hypophthalmichthys molitrix population in the Illinois River. The spatial structure within the model arises from the navigation “pools” that exist between navigation lock-and-dam in the river and are also the focus of fisheries management in the river. We completed LSA and GSA for two reasons: (1) to compare the importance of model input parameters on simulated model populations and (2) to demonstrate the use of LSA and GSA for population-level models. In our system, the most important sensitivity values generally were detected in Alton Pool. This pool is the farthest downstream and includes a direct connection with the Mississippi River. These results indicate that the population dynamics in Alton Pool are an important driver of the population dynamics throughout the Illinois River. Management outcomes in this system will, therefore, be strongly dependent on the dynamics of Alton Pool.

Illinois↗
USGS1984

Relationship of young-of-the-year northern pike to aquatic vegetation types in backwaters of the upper Mississippi River

The association of young-of-the-year northern pike ( Esox lucius ) with different aquatic plant types (e.g., submerged, emergent, floating) was studied to evaluate the impacts of a potential loss of backwaters on available fish nursery habitats in the upper Mississippi River. Eight biweekly collections were made at each of six representative lentic habitats in Navigation Pool 7. In the spring, average catches of northern pike from areas with submerged vegetation were nearly three times greater than from areas with emergent vegetation, and more than 10 times greater than from an area with no vegetation. This pattern was consistent until late summer, when the young became more common in the more highly oxygenated, less heavily vegetated waters. Food and growth were examined as possible indicators for the selection of areas with submerged vegetation over other habitats. Food varied among fish in the different vegetation types; however, no significant patterns of improved growth or condition were apparent. Young northern pike apparently were successful, opportunistic feeders. Although preference for habitats with submerged vegetation was seemingly not related to food, the overall production of young was clearly best in these habitats.

Illinois, Iowa, Minnesota, Missouri, Wisconsin↗
USGS2003

Movement and habitat use by radio-tagged paddlefish in the upper Mississippi River and tributaries

We used radio telemetry to evaluate the movement and habitat use of paddlefish Polyodon spathula in the upper Mississippi River and two tributary rivers. Radio transmitters were surgically implanted into 71 paddlefish in Navigation Pools 5A and 8 of the upper Mississippi River, the Chippewa River, and the Wisconsin River during fall 1994 through fall 1996. Radiotagged paddlefish were located through summer 1997. The range of paddlefish movement was typically low during all seasons except spring, but some paddlefish moved throughout the 420-km extent of the study area. Paddlefish tagged in the Chippewa River were closely linked with the upper Mississippi River, as substantial portions of the population inhabited the adjacent Navigation Pool 4 each spring; paddlefish in the Wisconsin River, however, rarely ventured out of that tributary. The use of aquatic area types by paddlefish varied among the study reaches. A cartographic model of paddlefish habitat suitability was developed for Navigation Pool 8 based on geographic information systems (GIS) coverages of bathymetry and current velocity. The value of paddlefish habitat in the cartographic model increased with depth and decreased with current velocity. For example, areas modeled as excellent corresponded to regions classified as having both deep water (greater than or equal to6.0 m) and negligible (<5 cm/s) current velocities. Our study suggests that aquatic area types are an inadequate basis for making sound management decisions regarding the critical habitats of paddlefish in complex riverine systems because such strata rely on gross geomorpological features rather than on the physicochemical variables that fish use to choose habitats. The development of systemic GIS coverages of such variables could improve the understanding of fish habitat selection and management in the upper Mississippi River.

North American Journal of Fisheries Management↗