Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2007

Hydrogeology and Potentiometric Surface of the Dublin and Midville Aquifer Systems in Richmond County, Georgia, January 2007

INTRODUCTION The Dublin and Midville aquifer systems are part of the Cretaceous aquifer system that underlies most of Richmond County, Georgia (Gorday, 1985; Falls and others, 1997). The Cretaceous aquifer system is the second most productive aquifer in Georgia and is a major source of water in the region. About 220 million gallons per day (Mgal/d) of water was withdrawn from the Cretaceous aquifer system during 2000 in Georgia (Fanning, 2003). The Augusta-Richmond County Water System is the largest public water supplier in the county and withdrew 13 Mgal/d of ground water during 2000; withdrawals decreased from 2001 to 2005. The towns of Hephzibah and Blythe withdrew 0.4 and 0.03 Mgal/d, respectively. Industrial ground-water withdrawals are concentrated along the Savannah River and totaled 2.89 Mgal/d. To monitor seasonal and long-term water-level fluctuations and trends in the aquifers, the U.S. Geological Survey (USGS) - in cooperation with Augusta Utilities - maintains a countywide network of about 100 water-level monitoring wells in various aquifers, including a new continuous monitoring site (well 30AA33) and two existing USGS-Georgia Environmental Protection Division network sites (wells 29AA09 and 30AA04). Data compiled during this study were used to better define the hydrogeologic units and to construct an updated potentiometric-surface map for the area, which is used to better understand ground-water movement in the Cretaceous aquifer system. In addition, the potentiometric surface and related water-level data can be used for water-resource planning and to update ground-water flow models for the region (Clarke and West, 1997; Cherry, 2006).

Georgia↗
USGS2009

Ground-water-withdrawal component of the Michigan water-withdrawal screening tool

A water-withdrawal assessment process and Internet-based screening tool have been developed to evaluate proposed new or increased high-capacity water withdrawals in Michigan. Michigan legislation defines high capacity withdrawals as those capable of removing an average of 100,000 gallons per day for a consecutive 30-day period. This report describes the ground-water component of the screening tool, provides background information used to develop the screening tool, and documents how this component of the screening tool is implemented. The screening tool is based on application of an analytical model to estimate streamflow depletion by a proposed pumping well. The screening tool is designed to evaluate intermittent pumping, to account for the dynamics of stream-aquifer interaction, and to apportion streamflow depletion among neighboring streams. The tool is to be used for an initial screening of a proposed new or increased high-capacity withdrawal in order to identify withdrawals that may cause adverse resource impacts. The screening tool is not intended to be a site-specific design tool. Results of an example application of the screening tool in Kalamazoo County, Mich., are compared to streamflow depletion estimated by use of a regional ground-water-flow model to demonstrate its performance.

Michigan↗
USGS2001

Apparent chlorofluorocarbon age of ground water of the shallow aquifer system, Naval Weapons Station Yorktown, Yorktown, Virginia

Apparent ages of ground water are useful in the analysis of various components of flow systems, and results of this analysis can be incorporated into investigations of potential pathways of contaminant transport. This report presents the results of a study in 1997 by the U.S. Geological Survey (USGS), in cooperation with the Naval Weapons Station Yorktown, Base Civil Engineer, Environmental Directorate, to describe the apparent age of ground water of the shallow aquifer system at the Station. Chlorofluorocarbons (CFCs), tritium ( 3 H), dissolved gases, stable isotopes, and water-quality field properties were measured in samples from 14 wells and 16 springs on the Station in March 1997. Nitrogen-argon recharge temperatures range from 5.9°C to 17.3°C with a median temperature of 10.9°C, which indicates that ground-water recharge predominantly occurs in the cold months of the year. Concentrations of excess air vary depending upon geohydrologic setting (recharge and discharge areas). Apparent ground-water ages using a CFC-based dating technique range from 1 to 48 years with a median age of 10 years. The oldest apparent CFC ages occur in the upper parts of the Yorktown-Eastover aquifer, whereas the youngest apparent ages occur in the Columbia aquifer and the upper parts of the discharge area setting, especially springs. The vertical distribution of apparent CFC ages indicates that groundwater movement between aquifers is somewhat retarded by the leaky confining units, but the elapsed time is relatively short (generally less than 35 years), as evidenced by the presence of CFCs at depth. The identification of binary mixtures by CFC-based dating indicates that convergence of flow lines occurs not only at the actual point of discharge, but also in the subsurface. The CFC-based recharge dates are consistent with expected 3 H concentrations measured in the water samples from the Station. The concentration of 3H in ground water ranges from below the USGS laboratory minimum reporting limit of 0.3 to 15.9 tritium units (TU) with a median value of 10.8 TU. Water-quality field properties are highly variable for ground water with apparent CFC ages less than 15 years because of geochemical processes within local flow systems. Ground water with apparent CFC ages greater than 15 years represents more stable conditions in subregional flow systems. The range of apparent CFC ages is slightly greater than the ranges in time of travel of ground water calculated for shallow wells (less than 60- feet deep) from flow-path analysis. Calculated travel times to springs can be up to two orders of magnitude greater than the CFC-based apparent ages. Reasonable assumptions of values for hydraulic parameters can result in substantial overestimates for time of travel to springs. Recharge rates computed from apparent CFC ages range from 0.29 to 0.89 feet per year (ft/ yr) with an average value of 0.54 ft/yr. The analysis of apparent CFC ages in conjunction with geohydrologic data indicates that young water (less than 50 years) is present at depth (nearly 120 feet) and that both local and subregional flow systems occur in the shallow aquifer system at the Station. The addition of the dimension of time to the three-dimensional framework of Brockman and others (1997) will benefit current (2001) and future remediation activities by providing estimates of advective transport rates and how these rates vary depending upon geohydrologic setting and position within the ground-water-flow system. Estimated ground-water apparent ages and recharge rates can be used as calibration criteria in simulations of ground-water flow on the Station to refine and constrain future ground-water-flow models of the shallow aquifer system.

Virginia↗
USGS1995

Hydrogeology and results of tracer tests at the old Tampa well field in Hillsborough County, with implications for wellhead-protection strategies in west-central Florida

Wellhead-protection strategies were evaluated for the Upper Floridan aquifer of west-central Florida using the old Tampa well field in northeastern Hillsborough County, Florida, as a test site. The upper 400 feet of the Upper Floridan aquifer responded to pumping as an equivalent, porous medium for a range of discharge rates from 450 to 1,000 gallons per minute. Transmissivity and storage coefficient values determined for the Upper Floridan aquifer were 23,000 feet squared per day and 0.0001, respectively. Rock cores from the Upper Floridan aquifer have effective porosity values from 21 to 46 percent. Tracer tests were conducted using a fluorescent dye. A bimodal distribution of tracer arrival times indicates ground-water flow through a dual porosity system. Analysis of tracer test results an effective porosity of 25 percent and a longitudinal dispersivity of 1.3 feet for the aquifer matrix. A numerical aquifer-simulation equivalent porous media model of the Upper Floridan aquifer was calibrated using results of aquifer tests. A particle-tracking program was used to simulate the matrix flow groundwater travel time measured with the fluorescent dye tracer test. An evaluation of wellhead-protection strategies was conducted using the particle-tracking program to simulate areas of contribution from the aquifer matrix. The results of this study demonstrate the heterogeneity of the Upper Floridan aquifer. Because of this heterogeneity, the use of uniform porosity models to delineate time-related areas of wellhead protection in the karst Upper Floridan aquifer is inappropriate; however, ground-water movement in the aquifer matrix can be simulated with uniform porosity models.

Water-Resources Investigations Report↗
USGS1994

Application of a Geographic Information System for regridding a ground-water flow model of the Columbia Plateau Regional Aquifer System, Walla Walla River basin, Oregon-Washington

Computerized Geographic Information Systems (GIS) have become viable and valuable tools for managing,analyzing, creating, and displaying data for three-dimensional finite-difference ground-water flow models. Three GIS applications demonstrated in this study are: (1) regridding of data arrays from an existing large-area, low resolution ground-water model to a smaller, high resolution grid; (2) use of GIS techniques for assembly of data-input arrays for a ground-water model; and (3) use of GIS for rapid display of data for verification, for checking of ground-water model output, and for the cre.ation of customized maps for use in reports. The Walla Walla River Basin was selected as the location for the demonstration because (1) data from a low resolution ground-water model (Columbia Plateau Regional Aquifer System Analysis [RASA]) were available and (2) concern for long-term use of water resources for irrigation in the basin. The principal advantage of regridding is that it may provide the ability to more precisely calibrate a model, assuming chat a more detailed coverage of data is available, and to evaluate the numerical errors associated with a particular grid design.Regridding gave about an 8-fold increase in grid-node density.Several FORTRAN programs were developed to load the regridded ground-water data into a finite-difference modular model as model-compatible input files for use in a steady-state model run.To facilitate the checking and validating of the GIS regridding process, maps and tabular reports were produced for each of eight ground-water parameters by model layer. Also, an automated subroutine that was developed to view the model-calculated water levels in cross-section will aid in the synthesis and interpretation of model results.

Water-Resources Investigations Report↗
USGS2006

Effects of Irrigation, Drought, and Ground-Water Withdrawals on Ground-Water Levels in the Southern Lihue Basin, Kauai, Hawaii

A numerical ground-water-flow model was used to investigate the effects of irrigation on ground-water levels in the southern Lihue Basin, Kauai, Hawaii, and the relation between declining ground-water levels observed in the basin in the 1990s and early 2000s and concurrent drought, irrigation reduction, and changes in ground-water withdrawal. Results of steady-state model simulations indicate that changing from pre-development to 1981 irrigation and ground-water-withdrawal conditions could, given enough time for steady state to be achieved, raise ground-water levels in some areas of the southern Lihue Basin by as much as 200 feet, and that changing from 1981 to 1998 irrigation and ground-water-withdrawal conditions could lower ground-water levels in some areas by as much as 100 feet. Transient simulations combining drought, irrigation reduction, and changes in ground-water withdrawal show trends that correspond with those observed in measured water levels. Results of this study indicate that irrigation reduction was the primary cause of the observed decline in ground-water-levels. In contrast, ground-water withdrawal had a long-duration but small-magnitude effect, and drought had a widespread, high-magnitude but short-duration effect. Inasmuch as irrigation in the future is unlikely to return to the same levels as during the period of peak sugarcane agriculture, the decline in ground-water levels resulting from the reduction and ultimate end of sugarcane irrigation can be considered permanent. Assuming that irrigation does not return to the southern Lihue Basin and that, on average, normal rainfall persists and ground-water withdrawal remains at 1998 rates, model projections indicate that average ground-water levels in the Kilohana-Puhi area will continue to recover from the drought of 1998-2002 and eventually rise to within about 4 feet of the pre-drought conditions. Long-term climate trends, increases in ground-water withdrawal, or other factors not simulated in the model could also affect ground-water levels in the southern Lihue Basin in the future.

Scientific Investigations Report↗
USGS1984

Ground-water models as a management tool in Florida

Highly sophisticated computer models provide powerful tools for analyzing historic data and for simulating future water levels, water movement, and water chemistry under stressed conditions throughout the ground-water system in Florida. Models that simulate the movement of heat and subsidence of land in response to aquifer pumping also have potential for application to hydrologic problems in the State. Florida, with 20 ground-water modeling studies reported since 1972, has applied computer modeling techniques to a variety of water-resources problems. Models in Florida generally have been used to provide insight to problems of water supply, contamination, and impact on the environment. The model applications range from site-specific studies, such as estimating contamination by wastewater injection at St. Petersburg, to a regional model of the entire State that may be used to assess broad-scale environmental impact of water-resources development. Recently, groundwater models have been used as management tools by the State regulatory authority to permit or deny development of water resources. As modeling precision, knowledge, and confidence increase, the use of ground-water models will shift more and more toward regulation of development and enforcement of environmental laws. (USGS)

Water-Resources Investigations Report↗
USGS2001

Vertical profiles of streambed hydraulic conductivity determined using slug tests in central and western Nebraska

Many issues of water-resources management rely on modeling of ground-water/surfacewater interactions, and streambed hydraulic conductivity is a key parameter controlling the water fluxes across the stream/aquifer interface. However, in central and western Nebraska, this parameter is generally undefined. The U.S. Geological Survey, in cooperation with the Nebraska Platte River Cooperative Hydrology Study Group, performed slug tests at 15 stream sites in the Platte, Republican, and Little Blue River watersheds to determine the hydraulic conductivity of streambeds in central and western Nebraska. Slug tests were completed at several discrete depth intervals using pneumatic or mechanical methods, and the water-level response was monitored on site using a pressure transducer and laptop computer. Responses were analyzed using either the Bouwer and Rice or Springer and Gelhar methods. Vertical profiles of hydraulic conductivity with depth were developed and were compared to available information on lithology. The profiles and corresponding lithology showed that different types of streambeds were tested and suggested that some streambeds display a large variability in hydraulic conductivity with depth. In some cases, hydraulic conductivity values associated with nonstreambed materials could be identified from nearby lithologic descriptions. Seven of 15 sites had streambed values that ranged over more than 3 orders of magnitude, and that variability increased significantly when the measurements considered to be from nonstreambed materials were included. Streambed profiles from the Platte and South Platte River sites generally were more homogeneous and of larger hydraulic conductivity than the other sites. No restrictive layers were detected at any of the streambed sites on the main stems or the flood plains of the main stems of their respective watersheds. Alternatively, the profiles characterized by a restrictive streambed layer at some depth below the streambed surface were all from tributary sites out of the main-stem flood plain. These profiles can be used to represent the streambed hydraulic conductivity in central and western Nebraska in various applications, including modeling ground-water/surfacewater interactions.

Nebraska↗
USGS1998

Review of Aquifer Test Results for the Lansdale Area, Montgomery County, Pennsylvania, 1980–95

Aquifer and aquifer-isolation test results in and around North Penn Area 6 Superfund site, Lansdale, Montgomery County, Pennsylvania are reviewed to provide estimated aquifer properties for use in a numerical model of ground-water flow. This review was made to support of remedial action investigations by U.S. Environmental Protection Agency (USEPA), Region III, Philadelphia. The data reviewed are from files of the U.S. Geological Survey, USEPA, and water companies, and from unpublished consultant reports prepared for USEPA and corporations in the Lansdale area. Tested wells are in fractured sedimentary rocks of the Brunswick Formation, which are Triassic-aged, dipping shales and sandstones. Review procedures include, in some cases, new analyses of drawdown during pumping and recovery by use of analytical models of flow to wells. Estimated aquifer transmissivities (T) range from zero to about 1,300 m 2 /d (meters squared per day); most tests indicate T between 10 and 100 m 2 /d. Aquifer-isolation testing results indicate that most flow enters wells at a few discrete zones, probably fractures or bedding-plane openings. The vertical connection between the zones in a single borehole with multiple producing zones commonly is negligible. This suggests that the formation is vertically anisotropic; the hydraulic conductivity is much larger in the horizontal direction than in the vertical direction. Some evidence of well-field-scale horizontal anisotropy exists, with maximum transmissivity aligned with the regional northeast strike of bedding, but this evidence is weak because of the small number of observation wells, particularly wells screened in isolated depth intervals. Analysis of recovery data after constant-pumping-rate aquifer tests and of drawdown during step tests suggests that a significant fraction, perhaps as much as 85 percent, of the drawdown in some production wells is due to well loss or skin effects in or very near the pumped well and is not caused by resistance to flow in the surrounding formations.

Pennsylvania↗
USGS2008

Update of the Accounting Surface Along the Lower Colorado River

The accounting-surface method was developed in the 1990s by the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, to identify wells outside the flood plain of the lower Colorado River that yield water that will be replaced by water from the river. This method was needed to identify which wells require an entitlement for diversion of water from the Colorado River and need to be included in accounting for consumptive use of Colorado River water as outlined in the Consolidated Decree of the United States Supreme Court in Arizona v. California. The method is based on the concept of a river aquifer and an accounting surface within the river aquifer. The study area includes the valley adjacent to the lower Colorado River and parts of some adjacent valleys in Arizona, California, Nevada, and Utah and extends from the east end of Lake Mead south to the southerly international boundary with Mexico. Contours for the original accounting surface were hand drawn based on the shape of the aquifer, water-surface elevations in the Colorado River and drainage ditches, and hydrologic judgment. This report documents an update of the original accounting surface based on updated water-surface elevations in the Colorado River and drainage ditches and the use of simple, physically based ground-water flow models to calculate the accounting surface in four areas adjacent to the free-flowing river.

Scientific Investigations Report↗
USGS2009

Simulation of Variable-Density Ground-Water Flow and Saltwater Intrusion beneath Manhasset Neck, Nassau County, New York, 1905-2005

The coastal-aquifer system of Manhasset Neck, Nassau County, New York, has been stressed by pumping, which has led to saltwater intrusion and the abandonment of one public-supply well in 1944. Measurements of chloride concentrations and water levels in 2004 from the deep, confined aquifers indicate active saltwater intrusion in response to public-supply pumping. A numerical model capable of simulating three-dimensional variable-density ground-water flow and solute transport in heterogeneous, anisotropic aquifers was developed using the U.S. Geological Survey finite-element, variable-density, solute-transport simulator SUTRA, to investigate the extent of saltwater intrusion beneath Manhasset Neck. The model is composed of eight layers representing the hydrogeologic system beneath Manhasset Neck. Four modifications to the area?s previously described hydrogeologic framework were made in the model (1) the bedrock-surface altitude at well N12191 was corrected from a previously reported value, (2) part of the extent of the Raritan confining unit was shifted, (3) part of the extent of the North Shore confining unit was shifted, and (4) a clay layer in the upper glacial aquifer was added in the central and southern parts of the Manhasset Neck peninsula. Ground-water flow and the location of the freshwater-saltwater interface were simulated for three conditions (time periods) (1) a steady-state (predevelopment) simulation of no pumping prior to about 1905, (2) a 40-year transient simulation based on 1939 pumpage representing the 1905-1944 period of gradual saltwater intrusion, and (3) a 60-year transient simulation based on 1995 pumpage representing the 1945-2005 period of stabilized withdrawals. The 1939 pumpage rate (12.1 million gallons per day (Mgal/d)) applied to the 1905-1944 transient simulation caused modeled average water-level declines of 2 and 4 feet (ft) in the shallow and deep aquifer systems from predevelopment conditions, respectively, a net decrease of 5.2 Mgal/d in freshwater discharge to offshore areas and a net increase of 6.9 Mgal/d of freshwater entering the model from the eastern, western, and southern lateral boundaries. The 1995 pumpage rate (43.3 Mgal/d) applied to the 1945-2005 transient simulation caused modeled average water-level declines of 5 and 8 ft in the shallow and deep aquifer systems from predevelopment conditions, respectively, a net decrease of 13.2 Mgal/d in freshwater discharge to offshore areas and a net increase of 30.1 Mgal/d of freshwater entering the model from the eastern, western, and southern lateral boundaries. The simulated decrease in freshwater discharge to the offshore areas caused saltwater intrusion in two parts of the deep aquifer system under Manhasset Neck. Saline ground water simulated in a third part of the deep aquifer system under Manhasset Neck was due to the absence of the North Shore confining unit near Sands Point. Simulated chloride concentrations greater than 250 milligrams per liter (mg/L) were used to represent the freshwater-saltwater interface, and the movement of this concentration was evaluated for transient simulations. The decrease in the 1905-1944 simulated freshwater discharge to the offshore areas caused the freshwater-saltwater interface in the deep aquifer system to advance landward more than 1,700 ft from its steady-state position in the vicinity of Baxter Estates Village, Long Island, New York. The decrease in the 1945-2005 simulated freshwater discharge to the offshore areas caused a different area of the freshwater-saltwater interface in the deep aquifer system to advance more than 600 ft from its steady-state position approximately 1 mile south of the Baxter Estates Village. However, the 1945-2005 transient simulation underestimates the concentration and extent of saltwater intrusion determined from water-quality samples collected from wells N12508 and N12793, where measured chloride concentrations increased from 625 and 18 mg/L in 1997 t

Scientific Investigations Report↗
USGS2008

Base of principal aquifer for the Elkhorn-Loup model area, North-Central Nebraska

In Nebraska, the water managers in the Natural Resources Districts and the Nebraska Department of Natural Resources are concerned with the effect of ground-water withdrawal on the availability of surface water and the long-term effects of ground-water withdrawal on ground- and surface-water resources. In north-central Nebraska, in the Elkhorn and Loup River Basins, ground water is used for irrigation, domestic supply, and public supply; surface water is used in this area for irrigation, recreation, and hydropower production. In recognition of these sometimes competing ground- and surface-water uses in the Elkhorn and Loup River Basins, the U.S. Geological Survey, the Lewis and Clark Natural Resources District, the Lower Elkhorn Natural Resources District, the Lower Loup Natural Resources District, the Lower Niobrara Natural Resources District, the Lower Platte North Natural Resources District, the Middle Niobrara Natural Resources District, the Upper Elkhorn Natural Resources District, and the Upper Loup Natural Resources District agreed to cooperatively study water resources in the Elkhorn and Loup River Basins. The goals of the overall study were to construct and calibrate a regional ground-water flow model of the area and to use that flow model as a tool to assess current and future effects of ground-water irrigation on stream base flow and to help develop long-term water-resource management strategies for this area, hereafter referred to as the Elkhorn-Loup model area. The Elkhorn-Loup model area covers approximately 30,800 square miles, and extends from the Niobrara River in the north to the Platte River in the south. The western boundary of the Elkhorn-Loup model area coincides with the western boundary of the Middle Niobrara, Twin Platte, and Upper Loup Natural Resources Districts; the eastern boundary coincides with the approximate location of the western extent of glacial till in eastern Nebraska. The principal aquifer in most of the Elkhorn-Loup model area is the High Plains aquifer; the principal aquifer in the remaining part of the Elkhorn-Loup model area is an unnamed alluvial aquifer. The upper surface of the geologic units that directly underlie the aquifer is called the 'base of aquifer' in this report. The geologic unit that forms the base of aquifer in the Elkhorn-Loup model area varies by location. The Tertiary-age Brule Formation generally is the base of aquifer in the west; the Cretaceous-age Pierre Shale generally is the base of aquifer in the east. The purpose of this report is to update the altitude and configuration of the base of the principal aquifer in the Elkhorn-Loup model area and a 2-mile buffer area around the Elkhorn-Loup model area, using base-of-aquifer data from test holes, registered water wells, and oil and gas wells within the Elkhorn-Loup model area and a 20-mile buffer area around the Elkhorn-Loup model area that have become available since the publication of earlier maps of the base of aquifer for this area. The base-of-aquifer map is important for the Elkhorn-Loup ground-water flow model because it defines the model's lower boundary. The accuracy of the Elkhorn-Loup ground-water flow model and the accuracy of the model's predictions about the effects of ground-water irrigation on stream base flow are directly related to the accuracy of the model's lower boundary.

Scientific Investigations Map↗
USGS2003

Simulated ground-water flow in the Hueco Bolson, an alluvial-basin aquifer system near El Paso, Texas

The neighboring cities of El Paso, Texas, and Ciudad Juarez, Chihuahua, Mexico, have historically relied on ground-water withdrawals from the Hueco Bolson, an alluvial-aquifer system, to supply water to their growing populations. By 1996, ground-water drawdown exceeded 60 meters in some areas under Ciudad Juarez and El Paso. A simulation of steady-state and transient ground-water flow in the Hueco Bolson in westernmost Texas, south-central New Mexico, and northern Chihuahua, Mexico, was developed using MODFLOW-96. The model is needed by El Paso Water Utilities to evaluate strategies for obtaining the most beneficial use of the Hueco Bolson aquifer system. The transient simulation represents a period of 100 years beginning in 1903 and ending in 2002. The period 1903 through 1968 was represented with 66 annual stress periods, and the period 1969 through 2002 was represented with 408 monthly stress periods. The ground-water flow model was calibrated using MODFLOWP and UCODE. Parameter values representing aquifer properties and boundary conditions were adjusted through nonlinear regression in a transient-state simulation with 96 annual time steps to produce a model that approximated (1) 4,352 water levels measured in 292 wells from 1912 to 1995, (2) three seepage-loss rates from a reach of the Rio Grande during periods from 1979 to 1981, (3) three seepage-loss rates from a reach of the Franklin Canal during periods from 1990 to 1992, and (4) 24 seepage rates into irrigation drains from 1961 to 1983. Once a calibrated model was obtained with MODFLOWP and UCODE, the optimal parameter set was used to create an equivalent MODFLOW-96 simulation with monthly temporal discretization to improve computations of seepage from the Rio Grande and to define the flow field for a chloride-transport simulation. Model boundary conditions were modified at appropriate times during the simulation to represent changes in well pumpage, drainage of agricultural fields, and channel modifications of the Rio Grande. The model input was generated from geographic information system databases, which facilitated rapid model construction and enabled testing of several conceptualizations of hydrogeologic facies boundaries. Specific yield of unconfined layers and hydraulic conductance of Quaternary faults in the fluvial facies were the most sensitive model parameters, suggesting that ground-water flow is impeded across the fault planes.

Water-Resources Investigations Report↗
USGS1999

U.S. Geological Survey middle Rio Grande basin study; proceedings of the third annual workshop, Albuquerque, New Mexico, February 24-25, 1999

Approximately 40 percent (about 600,000 people) of the total population of New Mexico lives within the Middle Rio Grande Basin, which includes the City of Albuquerque. Ongoing analyses of the central portion of the Middle Rio Grande Basin by the U.S. Geological Survey (USGS) in cooperation with the City of Albuquerque and other agencies have shown that ground water in the basin is not as readily accessible as earlier studies indicated. A more complete characterization of the ground-water resources of the entire Middle Rio Grande Basin is hampered by a scarcity of data in the northern and southern areas of the basin. The USGS Middle Rio Grande Basin study is a 5-year effort by the USGS and other agencies to improve the understanding of the hydrology, geology, and land-surface characteristics of the Middle Rio Grande Basin. The primary objective of this study is to improve the understanding of the water resources of the basin. Of particular interest is to determine the extent of hydrologic connection between the Rio Grande and the Santa Fe Group aquifer. Additionally, ground-water quality affects the availability of water supplies in the basin. Improving the existing USGS-constructed ground-water flow model of the Middle Rio Grande Basin will integrate all the various tasks that improve our knowledge of the various components of the Middle Rio Grande water budget. Part of this improvement will be accompanied by extended knowledge of the aquifer system beyond the Albuquerque area into the northern and southern reaches of the basin. Other improvements will be based on understanding gained through process-oriented research and improved geologic characterization of the deposits. The USGS and cooperating agencies will study the hydrology, geology, and land-surface characteristics of the basin to provide the scientific information needed for water-resources management and for managers to plan for water supplies needed for a growing population. To facilitate exchange of information among the scientists working on the Middle Rio Grande Basin study, yearly technical meetings have been held for each of the first 3 years of the anticipated 5-year study. These meetings provide an opportunity to present research results and plan new field efforts. This report documents the results of research presented at the third annual technical workshop held in Albuquerque, New Mexico, February 24-25, 1999. The report is organized into this introduction and five chapters that focus on Middle Rio Grande Basin study investigations in progress in the Middle Rio Grande Basin. The first chapter describes geographic data and analysis efforts in the basin. The second chapter details work being done on the hydrogeologic and geologic framework of the basin. The third chapter describes studies on ground-water recharge in the basin. The fourth chapter provides details on the research on the ground-water flow system in the basin, including modeling efforts. The fifth chapter is devoted to an overview of New Mexico District Cooperative Program studies in the basin. The information in this report presents preliminary results of an evolving study. As the study progresses and individual projects publish their results in more detail, the USGS hopes to expand the scientific basis needed for management decisions regarding the Middle Rio Grande Basin.

Open-File Report↗
USGS2006

MODOPTIM: A general optimization program for ground-water flow model calibration and ground-water management with MODFLOW

MODOPTIM is a non-linear ground-water model calibration and management tool that simulates flow with MODFLOW-96 as a subroutine. A weighted sum-of-squares objective function defines optimal solutions for calibration and management problems. Water levels, discharges, water quality, subsidence, and pumping-lift costs are the five direct observation types that can be compared in MODOPTIM. Differences between direct observations of the same type can be compared to fit temporal changes and spatial gradients. Water levels in pumping wells, wellbore storage in the observation wells, and rotational translation of observation wells also can be compared. Negative and positive residuals can be weighted unequally so inequality constraints such as maximum chloride concentrations or minimum water levels can be incorporated in the objective function. Optimization parameters are defined with zones and parameter-weight matrices. Parameter change is estimated iteratively with a quasi-Newton algorithm and is constrained to a user-defined maximum parameter change per iteration. Parameters that are less sensitive than a user-defined threshold are not estimated. MODOPTIM facilitates testing more conceptual models by expediting calibration of each conceptual model. Examples of applying MODOPTIM to aquifer-test analysis, ground-water management, and parameter estimation problems are presented.

Scientific Investigations Report↗