Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geostandards and Geoanalytical Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,226 records · Page 3Linked to original sources
USGS2025

A northeast-dipping zone of low frequency earthquakes at the southern edge of Cascadia subduction

Tectonic tremor monitoring occasionally detects events in an anomalous zone in southern Cascadia, 50–100 km west of the main tremor band, near the expected southern edge of the subducting Gorda slab at the Mendocino triple junction. To investigate the geometry and temporal behavior of this tremor, we examine its constituent low-frequency earthquakes (LFEs) by developing 27 stacked LFE waveform templates that we use to detect events from 2018 to 2024. We then relocate LFE sources together with regional seismicity. We find that LFE hypocenters form a northeast-dipping alignment at 22–29 km depth, extending eastward from a zone of micro-earthquakes, ∼15 km south of the southern edge of Gorda slab seismicity. These LFE families exhibit small bursts of activity every few days. Considering the strong world-wide association of tremor and LFEs with high slip-rate, plate-bounding faults, we hypothesize these LFEs may demark the southern edge of Cascadia subduction.

California↗
USGS2025

Strong shaking from past Cascadia Subduction Zone earthquakes encoded in coastal landforms

Strong earthquakes along subduction zones are often devastating events, but sparse records along some tectonic margins limit our understanding of seismic hazards. Constraining shaking intensities is critical, especially in subduction zones with infrequent but large-magnitude earthquakes like the Cascadia Subduction Zone (CSZ), where the lack of recorded ground motions has led to uncertainty in the severity and potential impacts of future earthquakes. Here we fill this observational gap with a novel inventory of quantitative estimates of past shaking intensities from geotechnical modeling of coastal landforms. One hundred fifty-four deep-seated landslides and 65 fragile geologic features constrain minimum and maximum peak ground accelerations, respectively. These estimates are broadly consistent with model predictions of M9 ruptures, suggesting strong shaking of 0.4–0.8 g during past CSZ earthquakes. Local discrepancies between our geologic shaking constraints and earthquake simulations may inform past rupture behavior, leading to better predictions of shaking intensity for future earthquakes.

California, Oregon, Washington↗
USGS2025

Improved prediction of postfire debris flows through rainfall anomaly maps

Predicting where runoff-generated debris flows might occur during rainfall on steep, recently burned terrain is challenging. Studies of mass-movement processes in unburned areas indicate that event locations are well-predicted by rainfall anomaly, R* , in which peak observed rainfall is normalized by local rainfall climatology. Here, we use remote and field methods to map debris flows triggered within the 2020 Dolan Fire burn area in coastal California, demonstrate that a short-duration R* metric predicts debris-flow occurrence more effectively than absolute peak intensity or longer-duration rainfall metrics, and show that incorporating an R* criterion into an existing debris-flow likelihood model can reduce false positive predictions and improve accuracy. We test R * at three other climatically distinct fires in California, demonstrating its utility for mapping likely debris-flow locations in different climates. We also consider how R* can benefit postfire debris-flow prediction given recent increases in climatological variability within individual burn perimeters.

Callifornia↗
USGS2025

Ubiquity and causes of soil water preferential flow across 17 ecoregions

Preferential flow (PF) in soil causes the rapid transport of water, nutrients, and contaminants into the subsurface, influencing groundwater recharge and streamflow. Data scarcity has hindered the quantification of PF occurrence and the identification of its drivers across diverse ecoregions. We address this gap by analyzing high-frequency, multi-depth soil moisture data across 17 ecoregions in the USA, using ∼1,500 sensors at 40 sites. We discovered that PF is widespread, with sites experiencing PF in up to 60% of rainfall events ≥2 mm. Multiple approaches consistently show that PF is more likely to occur with increased peak rainfall intensity, finer textured material, low soil moisture variability, humid climate, and higher net primary productivity. This suggests that PF patterns could shift with projected climate changes, increasing uncertainty in predictions of groundwater recharge, water quality, and streamflow generation.

conterminous United States and Puerto Rico↗
USGS2025

Bølling-Allerød productivity in the subarctic Pacific driven by seasonal upwelling

The Bølling-Allerød deglacial event is marked by high diatom productivity and opal deposition throughout the subarctic Pacific. This opal could either constitute a strengthened biological pump and thus carbon sequestration, or a weakened biological pump and release of marine-sequestered CO 2 to the atmosphere. We quantify silicic acid supply at IODP Site U1340 in the Bering Sea using biogenic opal and δ 30 Si of Coscinodiscus , a diatom genus. These records, along with diatom environmental indicators, suggest the Bølling-Allerød had high silicic acid availability related to a shift from stratification to seasonal upwelling dynamics. We thus propose the primary cause of the high productivity event was increased macronutrient supply from vertical exchange that injected old, nutrient-rich, CO 2 -rich waters into the surface. Enhanced CO 2 release from the subarctic Pacific may help explain critical intervals of CO 2 rise that occur at the onsets of the Bølling-Allerød and PreBoreal.

Geophysical Research Letters↗
USGS2025

Dating a medieval tsunami with uranium-series techniques on Caribbean corals

Uranium-series dates from coral boulders constrain the timing of a medieval tsunami from the Puerto Rico Trench. Previously reported evidence for this tsunami includes hundreds of coral boulders that came to rest hundreds of meters inland on Anegada, British Virgin Islands. New U-series dates on these coral boulders provide limiting dates for the tsunami. The narrowest limits were by dating interior bands of a coral that retains the hemispherical form of a living coral colony, and which include adjustments for the number of annual density band couplets between the dated samples and the boulder exteriors. By those limits, the tsunami dates between 1381 and 1391 CE, and likely occurred during summer or fall. The tsunami is important as the only reported sign that the eastern Puerto Rico Trench has produced a great earthquake. The dating may aid in defining the earthquake source and in communicating tsunami hazards.

British Virgin Islands, Puerto Rico↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2026

Preface to the focus section on intraplate earthquakes

More than a half century after plate tectonics provided an overarching framework to explain earthquakes along active plate boundaries, numerous theories have been proposed to explain where, why, and how often earthquakes occur well away from active plate boundaries, but a paradigm remains elusive. Even the classification of earthquakes away from active plate boundaries as "intraplate" raises issues, with potentially important distinctions between Stable Continental Regions and more actively deforming regions including passive margins and failed rifts. Some of the largest known intraplate earthquakes themselves remain enigmatic, having occurred before the modern instrumental era. Hazard assessments are often data-limited: low fault-slip rates relative to landscape modification rates result in poor discoverability of fault sources, challenging the characterization of source zones and earthquake recurrence; the completeness and homogenization of instrumental earthquake catalogs using uncertain magnitude conversions can lead to uncertainties in earthquake recurrence; and, limited strong-motion observations for large-magnitude events at near-source distances leads to uncertainties in the selection and development of ground-motion models for seismic hazard studies. Data from recent intraplate earthquakes around the world—from the moment magnitude M 7.7 2001 Bhuj, India, earthquake 25 years ago to the 2024 M 4.8 Tewksbury, New Jersey earthquake—have yielded both new insights and new questions. The papers in this special focus discuss many of the long-standing challenges involved with intraplate earthquake investigations and provide a snapshot of the state of the art with current research to advance our understanding.

Seismological Research Letters↗
USGS2025

Mapping a Carrington storm

A map is presented of median 1-min-resolution peak geoelectric-field strength across the United States as would be induced by magnetic storms as intense as the 2 September 1859 Carrington storm. The map is constructed from two data sets: Magnetometer time series from 22 ground-based observatories recording 40 magnetic storms, and surface impedance tensors derived from magnetotelluric measurements acquired at 1616 survey sites across the contiguous United States. Carrington-class storm geoelectric fields are likely to be very strong in the United States East and Midwest; > 5.00 V/km at many places. In Virginia, strengths would likely range from 30.30 V/km, with a 68% confidence interval of [19.44,47.20] V/km, to as low as 0.05 [0.03,0.07] V/km. Comparison of model geopotentials with those measured on 30 long lines, indicates errors of about 18%. A Carrington-class storm would likely induce geoelectric fields with strengths 55% greater than for the 13–14 March 1989 storm.

contiguous United States↗
USGS2024

Evaluation of an open earthquake early warning system in Mexico, and laboratory tests of their sensors

Microelectromechanical system (MEMS) accelerometers are useful for seismological and engineering applications because of their ability to record unsaturated large seismic signals. Recent advances in MEMS technologies enable the design of instruments with improved capabilities that also allow the recording of small signals. As a result, MEMS can be useful across a broad dynamic range and for both major earthquakes and smaller magnitude events. Here, we analyze the performance of a MEMS‐based accelerometer with the capability of real‐time data transmission. We discuss the self‐noise level, dynamic range, and sensitivity, along with the timing precision and data transmission latency, and compare these parameters to other MEMS‐based instruments. We also summarize observations from a regional network deployed in southern Mexico over a period of 3+ yr for the purpose of earthquake early warning. In addition to the sensor evaluation, we present a large, openly available data set of strong motion data from the Mexican network that comprises continuous ground‐motion records from 24 accelerometers in the period between 2017 and 2022.

Seismological Research Letters↗
USGS2026

Subsurface vertical connectivity shapes solute transport to montane streams: Insights from watershed-scale geophysics-informed modeling

Headwater catchments provide essential water and nutrients to downstream ecosystems. The timing and evolution of their transport is shaped in part by the “invisible” subsurface structure but have been largely unexplored at the watershed scale. This raises a fundamental question: how and to what extent does subsurface structure influence streamflow and solute transport in montane watersheds? Here, we test controls of three-dimensionally resolved subsurface structure on solute transport, which reflects source waters and water residence time. We integrate the geophysically mapped architecture of Coal Creek, a headwater catchment in the Colorado River Basin, into numerical flow-transport models. Our results reveal greater vertical connectivity elongates flow paths and enhances deep groundwater contributions to streams, therefore substantially influencing the timing and magnitude of solute transport. In contrast, watershed-integrated outlet discharge can be predicted without high-resolution subsurface information. These findings demonstrate incorporating subsurface architecture is critical for predicting ecosystem health and contaminant transport.

Colorado↗
USGS2026

Synthesizing a twelve-year sediment trap time series of planktic foraminiferal flux in the Gulf of America (Mexico)

Sediment trap time series provide powerful frameworks for testing hypotheses about planktic foraminiferal assemblage composition, seasonality, and geochemical responses to environmental variability, all of which are central to improving paleoceanographic reconstructions. We present high resolution foraminiferal assemblage data from a long-running sediment trap (2008–2020) in the northern Gulf of America (Mexico). This study summarizes the species composition, seasonality, and size distribution of the fifteen most abundant species of planktic foraminifera, which account for 98% of total flux. Foraminiferal flux peaks in winter and reaches a minimum in summer, following the seasonal pattern of primary production in the northern Gulf. Winter assemblages are dominated by non-spinose taxa, whereas spinose taxa prevail during summer. Across nearly all species, average monthly test size covaries with temperature, independent of seasonal flux trends. Notably, Trilobatus sacculifer and Neogloboquadrina dutertrei show a significant decline in relative abundance and flux during 2017–2020, nearly disappearing from the assemblage.

Journal of Foraminiferal Research↗
USGS2026

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2025

Slow rupture, long rise times, and multi-fault geometry: The 2020 M6.4 southwestern Puerto Rico mainshock

The M 6.4 mainshock of the southwestern Puerto Rico seismic sequence on 7 January 2020, was one of the most impactful modern earthquakes in the northeastern Caribbean. Due to its offshore location and complex aftershock distribution, its source kinematics remain poorly constrained. This active sequence illuminated a complex set of previously unrecognized structures that indicate multiple causative faults may have slipped during its rupture. Here, we utilize seismic and geodetic observations to enhance model resolution, estimate the finite slip of the mainshock, and test a multi-segment, geologically realistic fault geometry. Our refined model finds a lower rupture velocity and longer rise times than typical for an event of this magnitude. This indicates a slow-evolving rupture process that resembles characteristics of a tsunami earthquake. Although this normal/strike-slip faulting event was not tsunamigenic, these qualities, if pervasive for this region, have important implications for future seismic monitoring and hazards in southwestern Puerto Rico.

Puerto Rico↗
USGS2025

The impact of 3D structure on coseismic coastal land-level change and tsunami generation in the Cascadia Subduction Zone

Estimates of coseismic vertical displacements from past and potential future subduction zone earthquakes provide critical constraints on regional seismic and tsunami hazard. Many studies use elastic homogeneous half-space models to calculate vertical displacements from a specified earthquake slip distribution, neglecting complexities of 3D structure in subduction zone settings. Here, we use 3D ground motion simulations of potential Cascadia Subduction Zone earthquakes to investigate the impact of realistic 3D Earth structure on estimated vertical displacements. We show that offshore uplift increases when including 3D structure due to high fault slip in low-rigidity accretionary wedge sediments and coastal subsidence decreases due to higher rigidity material at depth. These larger offshore uplifts cause increased tsunami maximum wave heights, and coastal subsidence at paleoseismic sites decreases on average by ∼17 cm, or ∼60%, which can have important implications for the amplitude and extent of slip in earthquake scenarios developed based on paleoseismic data constraints.

California, Oregon, Washington↗
USGS2026

Earthquake catalog for the Fairbanks region of central Alaska, 2014–2024, based on waveform cross-correlation

The Fairbanks region of central Alaska is part of a broad zone of intraplate crustal deformation, situated north of the Denali fault and north of the ongoing collision and flat‐slab subduction of the Yakutat oceanic plateau. Seismicity in the Fairbanks region occurs both in diffuse areas as well as in well‐defined lineaments, such as the left‐lateral Salcha fault, which hosted the 1937 M 8 7.3 earthquake. Starting with the regional seismicity catalog, we perform waveform cross‐correlation, network‐matched filtering, and relative relocation to obtain an enhanced seismicity catalog over the time period 2014–2024. Based on the relocated catalog, we interpret a set of 15 fault segments, including two conjugate faults and two new faults east of the previously documented fault system. Considering the combined seismicity in the Minto and Fairbanks regions, the median depth of seismicity decreases from east (6 km) to west (20 km). Our interpreted faults provide guidance for future tectonic modeling and assessment of seismic hazards in this region.

Alaska↗
USGS2026

Standardized method for logging drill core at the Idaho National Laboratory, Idaho

The U.S. Geological Survey’s (USGS) Lithologic Core Storage Library (CSL) at the Idaho National Laboratory stores more than 120,000 feet of drill core that is accessible to the public for research and sampling. To effectively convey the physical and descriptive properties of the drill core, USGS staff at the Idaho National Laboratory Project Office log the drill core and publish the lithologic logs as data releases. The logs provide essential data on the lithology, texture, mineralogy, alteration, and other physical properties of the core, which serve as valuable information for researchers to guide their research and sampling efforts. To ensure consistent, quality, and dependable lithologic logs, this document outlines the procedures and expectations for logging drill core at the CSL. This document describes the processes for storing, photographing, and logging core, and includes a variety of resources, reference materials, and appendixes designed to standardize and aid the logging process. Following the procedures outlined in this document will produce consistent, detailed logs that facilitate dependable observations and serve as an easy reference for researchers and other interested parties.

Idaho↗
USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗