Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Developments in Sedimentology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS2022

Sedimentological and geochemical perspectives on a marginal lake environment recorded in the Hartmann’s Valley and Karasburg members of the Murray formation, Gale crater, Mars

This study utilizes instruments from the Curiosity rover payload to develop an integrated paleoenvironmental and compositional reconstruction for the 65-m thick interval of stratigraphy comprising the Hartmann's Valley and Karasburg members of the Murray formation, Gale crater, Mars. The stratigraphy consists of cross-stratified sandstone (Facies 1), planar-laminated sandstone (Facies 2), and planar-laminated mudstone (Facies 3). Facies 1 is composed of sandstone showing truncated sets of concave-curvilinear laminae stacked into cosets. Sets are estimated to be meter-to sub-meter-scale, consistent with low-height dunes. Thin stratigraphic intervals of Facies 1 and stacking patterns with Facies 2 and 3 support a wet aeolian dune interpretation. Meter-thick packages of planar-laminated sandstone (Facies 2) are interpreted to represent interfingering dune-interdune strata. Facies 3 consists of meter-thick packages of planar-laminated mudstone interpreted to represent lacustrine deposition with persistent standing water. Integration of geochemistry with each facies reveals some compositional control based on the depositional process. Models for source rock composition from Alpha Particle X-Ray Spectrometer measurements show that facies derived from a basaltic source. Alteration indices and geochemical trends provide evidence that moderate chemical weathering occurred before compositional changes due to diagenesis. Differences in wt% FeO (T) and TiO 2 between facies are minimal, though trends point to sediment sorting in transport. Comparisons to terrestrial basaltic sedimentary systems indicate that the Hartmann's Valley and Karasburg facies reflect deposition in an environment where diverse subaqueous and subaerial facies persisted adjacent to a long-lived body of water.

Journal of Geophysical Research Planets↗
USGS1991

Molluscan paleoecology and sedimentation patterns of the Cenomanian-Turonian extinction interval in the southern Colorado Plateau region

Lithology, carbonate and organic carbon geochemistry, and molluscan macrofauna were investigated in fine-grained clay-dominated strata spanning the Cenomanian-Turonian Stage boundary in the southern Colorado Plateau region. Analyses of these data show basinal and onshore to offshore changes in sedimentologic and molluscan assemblage trends through the upper Cenomanian Sciponoceras gracile and Neocardioceras juddii and lower Turonian Watinoceras coloradoense Biozones. Diverse infaunal/epifaunal bivalve assemblages are best developed in the Sciponoceras gracile Biozone and at the more clay-rich nearshore sections. Gastropod and infaunal bivalve abundance and diversity decrease in an offshore and up-section direction as carbonate and organic carbon percentages generally increase. The Neocardioceras juddii Biozone precedes the stage boundary and is characterized in Utah and Arizona by pulsed increases in organic carbon and detrital-feeding gastropods, and by a shift in infaunal bivalve dominance toward species adapted for soft-substrate conditions. These data suggest that pulses of increased organic detrital resources and decreased substrate firmness were associated with the stage boundary extinctions. The stage boundary is marked by a change to depauperate epifaunal assemblages at western sections. At all sections, the base of the Watinoceras coloradoense Biozone is reflected by an abrupt increase in carbonate and decrease in organic carbon percentages as well as by the immigration of Mytiloides bivalves. Periods of progressive recovery through this biozone were associated with carbonate-rich depositional periods.

Arizona, Colorado, New Mexico, Utah↗
USGS2023

Observations of coastal circulation, waves, and sediment transport along West Maui, Hawaiʻi (November 2017– March 2018), and modeling effects of potential watershed restoration on decreasing sediment loads to adjacent coral reefs

Terrestrial sediment discharging from watersheds off West Maui, Hawaiʻi, has been documented as a primary stressor to local coral reefs, causing coral reef health to decline. The U.S. Geological Survey acquired and analyzed physical oceanographic and sedimentologic field data off the coast of West Maui to calibrate and validate physics-based, numerical hydrodynamic and sediment transport models of the study area developed by Deltares. These models simulated terrestrial sediment transport and dispersal from West Maui watersheds into coastal waters and how terrestrial sediment affects nearby coral reefs under different oceanographic forcing and watershed restoration scenarios. Wave energy and near-bed turbidity are positively correlated in the field observations, illustrating a process not captured by the model simulations in which sediment already deposited on the seabed is resuspended by wave action and subsequently transported by prevailing currents. In the model simulations, large waves during flood events led to a decrease in suspended-sediment concentrations. Notably, however, the model results only consider sediment entering coastal waters from five stream sources and do not simulate sediment already present on the seabed. The model simulations project that the Honokeana and Māhinahina coral reefs would experience the greatest reduction in sediment impacts from theoretical watershed restoration. Additionally, when large waves coincide with flood events, post-storm sedimentation generally decreases in the nearshore region, but increases in the region offshore of the reefs. The measured and modeled sediment dynamics demonstrate a demarcation between the coral reefs sheltered within embayments (Honolua reef) or behind points (Wahikuli reef) and those along the relatively open coastline between Kapalua and Kāʻanapali (Kapalua, Honokeana, Māhinahina, and Honokōwai reefs). The sheltered sites are affected by terrestrial sediment from single stream mouths, where most sediment is delivered within hours of a flood (rain) event. Once this sediment enters the nearshore, it settles out and remains within the reef area for a prolonged period owing to a lack of wave or current-driven bed shear stress. Thus, the primary effect of sediment on the reefs within these sheltered areas is sedimentation. In contrast, coral reefs along the unsheltered (or “open”) section of coastline (between Kapalua and Kāʻanapali) are more exposed to waves and terrestrial sediment from multiple stream sources. At these reefs, fine-grained terrestrial sediment can rarely settle but instead remains in suspension. Thus, even long after a flood event has occurred, these sites chronically experience light attenuation from suspended sediment. These analyses underscore the importance of understanding how coastal ocean waves and circulation can lead to different sediment dynamics and stressors for coral reefs along the same region of the West Maui coastline. These differing factors indicate that the most effective watershed restoration and mitigation strategies may vary among the different coral reefs and streams. An important next step is to determine how the science of this study can support management goals for these coral reefs: what are target reductions of sedimentation, suspended-sediment concentrations, or the resulting light attenuation? Then, using the coupled hydrodynamic-sediment model, we can examine which watershed restoration scenarios in each stream will best achieve those targets.

Hawaii↗
USGS2005

Origin and development of plains-type folds in the mid-continent (United States) during the late Paleozoic

Plains-type folds are local, subtle anticlines formed in the thin sedimentary package overlying a shallow, crystalline basement on the craton. They are small in areal extent (usually less than 1-3 km 2 [0.4-1.2 mi2]), and their amplitude increases with depth (usually tens of meters), which is mainly the result of differential compaction of sediments (usually clastic units) over tilted, rigid, basement fault blocks. The development of these structural features by continuous but intermittent movement of the basement fault blocks in the late Paleozoic in the United States mid-continent is substantiated by a record of stratigraphic and sedimentological evidence. The recurrent structural movement, which reflects adjustment to external stresses, is expressed by the change in thickness of stratigraphic units over the crest of the fold compared to the flanks. By plotting the change in thickness for different stratigraphic units of anticlines on different fault blocks, it is possible to determine the timing of movement of the blocks that reflect structural adjustment. These readjustments are confirmed by sedimentological evidence, such as convolute, soft-sediment deformation features and small intraformational faults. The stratigraphic interval change in thickness for numerous structures in the Cherokee, Forest City, and Salina basins and on the Nemaha anticline of the mid-continent United States was determined and compared for location and timing of the adjustments. Most of the adjustment occurred during and after time of deposition of the Permian-Pennsylvanian clastic units, which, in turn, reflect tectonic disturbance in adjacent areas, and the largest amount of movement on the plains-type structures occurred on those nearest and semiparallel to major positive features, such as the Nemaha anticline. Depending on the time of origin and development of plains-type folds, they may control the entrapment and occurrence of oil and gas. Copyright ??2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2022

Chandeleur Islands to Breton Island bathymetric and topographic datasets and operational sediment budget development: Methodology and analysis report

This study is part of the Coastal Protection and Restoration Authority (CPRA) Louisiana Barrier Island Comprehensive Monitoring (BICM) program. The goal of the BICM program is to provide long-term data on the barrier islands of Louisiana for monitoring change and assisting in coastal management. The BICM program uses historical data and acquires new data to map and monitor shoreline position, sediment properties, topography, bathymetry, and habitat. Since 2006, the U.S. Geological Survey (USGS) has collected geophysical and sedimentologic data across the Breton National Wildlife Refuge (BNWR) through the BICM program and collaborative USGS projects such as the Barrier Island Evolution Research project (under CPRA contract number 2000339324, BICM2–Chandeleurs TopoBathy DEM), which builds upon the previous BICM physical assessment of the BNWR outlined in a separate report. This project uses topographic and bathymetric data from three periods (1917–1922, 2006–2007, and 2013–2015) to develop digital elevation models (DEMs), measure elevation change, and calculate sediment budgets for the barrier island system. The sediment budget analysis, derived from the volumetric change between the three periods, is necessary for understanding sediment transport dynamics along barrier islands and providing information for effective coastal management. This report describes the methods used to acquire, process, and produce these products.

Louisiana↗
USGS1999

Techniques for restoration of disturbed coastal wetlands of the Great Lakes

A long history of human-induced degradation of Great Lakes wetlands has made restoration a necessity, but the practice of wetland restoration is relatively new, especially in large lake systems. Therefore, we compiled tested methods and developed additional potential methods based on scientific understanding of Great Lakes wetland ecosytems to providc an overview of approaches for restoration. We addressed this challenge by focusing on four general fields of science: hydrology, sedimentology, chemistry, and biology. Hydrologic remediation methods include restoring hydrologic connections between diked and hydrologically altered wetlands and the lakes, restoring water tables lowered by ditching, and restoring natural variation in lake levels of regulated lakes Superior and Ontario. Sedimentological remediation methods include management of sediment input from uplands, removal or proper management of dams on tributary rivers, and restoration of protective barrier beaches and sand spits. Chemical remediation methods include reducing or eliminating inputs of contaminants from point and non-pont sources, natural sediment remediation by biodegradation and chemical degradation, and active sediment remediation by removal or by in situ treatment Biological remediation methods include control of non-target organisms, enhancing populations of target organisms, and enhancing habitat for target organisms. Some of these method were used in three major restoration projects (Metzger Marsh on Lake Erie and Cootes Paradise and Oshawa Second Marsh on Lake Ontario), which are described as case studies to show practical applications of wetland restoration in the Great Lakes. Successful restoration techniques that do not require continued manipulation must be founded in the basic tenets of ecology and should mimic natural processes. Success is demonstrated by the sustainability, productivity, nutrient-retention ability, invasibility, and biotic interactions within a restored wetland.

Wetlands↗
USGS2018

Aeolian stratigraphy describes ice-age paleoenvironments in unglaciated Arctic Alaska

Terrestrial paleoenvironmental records with high dating resolution extending into the last ice age are rare from the western Arctic. Such records can test the synchronicity and extent of ice-age climatic events and define how Arctic landscapes respond to rapid climate changes. Here we describe the stratigraphy and sedimentology of a yedoma deposit in Arctic Alaska (the Carter Section) dating to between 37,000 and 9000 calibrated radiocarbon years BP (37–9 ka) and containing detailed records of loess and sand-sheet sedimentation, soil development, carbon storage, and permafrost dynamics. Alternation between sand-sheet and loess deposition provides a proxy for the extent and activity of the Ikpikpuk Sand Sea (ISS), a large dune field located immediately upwind. Warm, moist interstadial times (ca. 37, 36.3–32.5, and 15–13 ka) triggered floodplain aggradation, permafrost thaw, reduced loess deposition, increased vegetation cover, and rapid soil development accompanied by enhanced carbon storage. During the Last Glacial Maximum (LGM, ca. 28–18 ka), rapid loess deposition took place on a landscape where vegetation was sparse and non-woody. The most intense aeolian activity occurred after the LGM between ca. 18 and 15 ka when sand sheets fringing the ISS expanded over the site, possibly in response to increasingly droughty conditions as summers warmed and active layers deepened. With the exception of this lagged LGM response, the record of aeolian activity at the Carter Section correlates with other paleoenvironmental records from unglaciated Siberia and Alaska. Overall, rapid shifts in geomorphology, soils, vegetation, and permafrost portray an ice-age landscape where, in contrast to the Holocene, environmental change was chronic and dominated by aeolian processes.

Alaska↗
USGS2008

A Visual Basic program to plot sediment grain-size data on ternary diagrams

Sedimentologic datasets are typically large and compiled into tables or databases, but pure numerical information can be difficult to understand and interpret. Thus, scientists commonly use graphical representations to reduce complexities, recognize trends and patterns in the data, and develop hypotheses. Of the graphical techniques, one of the most common methods used by sedimentologists is to plot the basic gravel, sand, silt, and clay percentages on equilateral triangular diagrams. This means of presenting data is simple and facilitates rapid classification of sediments and comparison of samples. The original classification scheme developed by Shepard (1954) used a single ternary diagram with sand, silt, and clay in the corners and 10 categories to graphically show the relative proportions among these three grades within a sample. This scheme, however, did not allow for sediments with significant amounts of gravel. Therefore, Shepard's classification scheme was later modified by the addition of a second ternary diagram with two categories to account for gravel and gravelly sediment (Schlee, 1973). The system devised by Folk (1954, 1974)\ is also based on two triangular diagrams, but it has 21 categories and uses the term mud (defined as silt plus clay). Patterns within the triangles of both systems differ, as does the emphasis placed on gravel. For example, in the system described by Shepard, gravelly sediments have more than 10% gravel; in Folk's system, slightly gravelly sediments have as little as 0.01% gravel. Folk's classification scheme stresses gravel because its concentration is a function of the highest current velocity at the time of deposition as is the maximum grain size of the detritus that is available; Shepard's classification scheme emphasizes the ratios of sand, silt, and clay because they reflect sorting and reworking (Poppe et al., 2005). The program described herein (SEDPLOT) generates verbal equivalents and ternary diagrams to characterize sediment grain-size distributions. It is written in Microsoft Visual Basic 6.0 and provides a window to facilitate program execution. The inputs for the sediment fractions are percentages of gravel, sand, silt, and clay in the Wentworth (1922) grade scale, and the program permits the user to select output in either the Shepard (1954) classification scheme, modified as described above, or the Folk (1954, 1974) scheme. Users select options primarily with mouse-click events and through interactive dialogue boxes. This program is intended as a companion to other Visual Basic software we have developed to process sediment data (Poppe et al., 2003, 2004).

Computers & Geosciences↗
USGS2019

Estimating sand concentrations using ADCP‐based acoustic inversion in a large fluvial system characterized by bi‐modal suspended‐sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro‐geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down‐looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi‐modal particle size distributions, wash load and suspended‐sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro‐sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended‐sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended‐sand concentrations for all sites and ADCP frequencies, resulting in mean suspended‐sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers.

Earth Surface Processes and Landforms↗
USGS2009

Recognizing former flood-tide deltas in the Holocene stratigraphic record from the Outer Banks, North Carolina, USA

Foraminiferal and sedimentologic data were collected by vibracoring a small, relict, short-lived, migrating inlet (New Inlet) and its flood-tide delta on the Outer Banks, North Carolina. These data, placed in the context of geospatial data derived from ground penetrating radar, were developed into a stratigraphic model for this sedimentary environment. The model was applied to vibracores collected from two additional barrier island segments within which historic inlets had not been recorded to investigate whether inlets had existed in these segments in the past. Five foraminiferal biofacies were recognized within the three barrier island segments. Biofacies 1 through 5 are all associated with interior and back-barrier depositional environments but Biofacies 4 and 5 contained foram-inifera indicating a sediment source on the shoreface or shallow inner shelf. Biofacies 4 and 5 thus represent overwash or flood-tide delta depositional settings. Utilizing the model as an interpretive tool, we recognized a previously undocumented inlet and flood-tide delta that existed prior to 962-662 cal. yrs BP, a few kilometers north of Rodanthe, NC. However, at a barrier island segment between Avon and Buxton, NC., the lack of information on stratal geometry and foraminiferal assemblages meant that it could not be determined whether this sedimentary succession was influenced more by overwash or inlet dynamics. Given the similarity of foraminiferal assemblages in overwash and flood-tide delta sediments, it is clear that additional lines of evidence (lithologic and geospatial) are required to recognize small-scale flood-tide delta deposits in the subsurface.

Stratigraphy↗
USGS2006

Controls on the accumulation of coal and on the development of anastomosed fluvial systems in the Cretaceous Dakota Formation of southern Utah

Alluvial strata of the Cretaceous Dakota Formation of southern Utah are part of a transgressive systems tract associated with a foreland basin developed adjacent to the Sevier orogenic belt. These strata contain valley fill deposits, anastomosed channel systems and widespread coals. The coals constitute a relatively minor part of the Dakota Formation in terms of sediment volume, but may represent a substantial amount of the time represented by the formation. The coals are separated by clastic units up to 20 m thick. The stratigraphically lowest clastic unit of the Dakota Formation lies above an unconformity cut into Jurassic rocks. Incised valleys associated with the unconformity are up to 12 m deep. Two discrete episodes of valley fill sedimentation are recognized, including a lower sandstone unit with conglomerate layers, and an upper, discontinuous, coal-bearing unit. After the valleys filled, the area became one of low relief where extensive mires formed. Peat accumulation was interrupted at least three times by deposition of clastic sediment derived from the west. The clastic units consist of sandstone, mudstone or heterolithic ribbon bodies, stacked tabular sandstones, and laminated mudstones, and contain minor coal beds less than 0·35 m thick. Ribbon bodies are 1–9 m thick and 15–160 m wide, have pronounced basal scours, and are filled with both lateral and vertical accretion deposits. An anastomosed channel complex is suggested by the large number of coeval channels of varying dimensions, the variation in the structure and grain size of channel fills, and the presence of abundant tabular sandstones interpreted as crevasse splays. Although some sandstone bodies have well developed lateral accretion surfaces, the overall ribbon geometry indicates that mature meandering streams were not well developed. This is in contrast to modern anastomosed systems, which are commonly thought to be a transitional morphology caused by avulsion of a meander belt to a new position on its floodplain. Rather than being a transitional channel pattern related to river avulsion, the anastomosed channels of the Dakota Formation may have formed part of a large inland delta that episodically invaded widespread mires. The mires developed during periods when clastic influx was reduced either by high rates of subsidence close to the thrust belt or by deflection of rivers by emergent thrusts.

Utah↗
USGS2007

Sedimentology, stratigraphy, and depositional environment of the Crystal Geyser Dinosaur Quarry, east-central Utah

The Crystal Geyser Dinosaur Quarry, near Green River, Utah, is located at the base of the Lower Cretaceous (Barremian) Yellow Cat Member of the Cedar Mountain Formation. The quarry preserves a nearly monospecific accumulation of a new basal therizinosauroid, Falcarius utahensis. We used field descriptions and petrographic analysis to determine the depositional environment and development of the quarry strata. Results of these analyses suggest that the quarry represents multiple episodes of bone accumulation buried by spring and overbank flood deposits. Evidence for these previously undescribed spring deposits includes calcite macroscopic structures within the quarry strata - such as pisolites and travertine fragments - and calcite micromorphologies - including radial-fibrous, feather, and scandulitic dendrite morphologies and tufa clasts. At least two episodes of bone incorporation are preserved in the quarry based on their stratigraphic position and lithologic associations. The unique depositional setting in and around the Crystal Geyser Dinosaur Quarry appears to have been favorable for the preservation of vertebrate fossils and provides insight into early Cretaceous environments in North America. Copyright ?? 2007, SEPM (Society for Sedimentary Geology).

Palaios↗
USGS1980

Bibliography of fine-grained siliceous deposits

This bibliography was compiled under the auspices of the International Geologic Correlations Project's (IGCP) Research Group 115, "Siliceous Deposits of the Pacific Region"; IGCP is sponsored by UNESCO and the International Union of Geological Sciences (IUGS). Research Group 115 was originally proposed to IGCP in 1974 by Professor Azuma Iijima, University of Tokyo, and is now headed by James R. Hein, U.S. Geological Survey. Cooperative efforts by 86 members from 17 countries help in accomplishing Research Group 115's objectives of correlating sedimentary processes of siliceous deposits in the Pacific Basin and neighboring geosynclinal areas by means of stratigraphy, sedimentology, geochemisty, and paleontology. These correlations will allow us to estimate the geochemical silica budget in the Earth's crust; to estimate the production of silica in the marine environment through geologic time; to formulate a general rule on sedimentation of siliceous deposits in geosynclines; to increase understanding of the development of circum-Pacific orogenic belts; and to obtain basic methods to evaluate siliceous deposits of economic interest. The group agreed to focus on fine-grained siliceous deposits (cherts, siliceous shales, diatomites, and the like) and to exclude quartz sand deposits and quartzose sandstones.

Open-File Report↗
USGS2023

Hydrogeologic framework of the Red River alluvial aquifer and Carrizo-Wilcox aquifer in northwestern Louisiana

Groundwater in northwestern Louisiana is a valuable resource needed for expanding public-supply needs as well as possible energy development needs arising from Haynesville Formation natural-gas production. The Red River alluvial and the Carrizo-Wilcox aquifers are two of the most important and heavily pumped aquifers in northwestern Louisiana; however, little documentation of the regional hydrogeologic framework is available. The U.S. Geological Survey and the Louisiana Department of Transportation and Development have consolidated information from, and built upon, previous studies of the Red River alluvial and the Carrizo-Wilcox aquifers to characterize and document the regional hydrogeologic framework of northwestern Louisiana. The study area has been tectonically modified and includes abundant structural features such as salt domes and areally extensive faulting in addition to minor folding related to these features, all of which impact the sedimentological and hydraulic characteristics of the freshwater-bearing strata. The hydrogeologic framework of northwestern Louisiana comprises a sequence of structurally modifi ed, complexly interbedded, varyingly interconnected, clayey, sandy, and gravelly alluvial sediments. The important freshwater hydrogeologic units include the Quaternary Red River alluvial and upland terrace aquifers, and the underlying Tertiary Sparta, Cane River, and Carrizo-Wilcox aquifers. The Midway confining unit underlies the Carrizo-Wilcox aquifer throughout the study area. No freshwater is present in or below the Midway Group. Tertiary-age formations exposed at land surface in the study area have been incised by the Red River and are hydraulically connected to the Quaternary Red River alluvium in the Red River valley. In 2010, 7.73 million gallons per day (Mgal/d) of water were withdrawn from the Red River alluvial aquifer in the study area, representing an increase of 2.00 Mgal/d, or about 35 percent, over 2005 withdrawal rates. The Tertiary Carrizo Sand and Wilcox Group crop out across much of the study area. The two units are hydraulically connected and function as a single hydrologic unit referred to as the Carrizo-Wilcox aquifer. In 2010, 19.33 Mgal/d of water were withdrawn from the Carrizo-Wilcox aquifer in the study area, representing an increase of nearly 1.8 Mgal/d, or about 10 percent, over 2005 withdrawal rates. Any expansion in energy development, as well as water needs of an increasing population, could result in an increased demand on groundwater in northwestern Louisiana.

Louisiana↗
USGS1996

Identifying coseismic subsidence in tidal-wetland stratigraphic sequences at the Cascadia subduction zone of western North America

Tidal-wetland stratigraphy reveals that great plate boundary earthquakes have caused hundreds of kilometers of coast to subside at the Cascadia subduction zone. However, determining earthquake recurrence intervals and mapping the coastal extent of past great earthquake ruptures in this region are complicated by the effects of many sedimentologic, hydrographic, and oceanographic processes that occur on the coasts of tectonically passive as well as active continental margins. Tidal-wetland stratigraphy at many Cascadia estuaries differs little from that at similar sites on passive-margin coasts where stratigraphic sequences form through nonseismic processes unrelated to coseismic land level changes. Methods developed through study of similar stratigraphic sequences in Europe provide a framework for investigating the Cascadia estuarine record. Five kinds of criteria must be evaluated when inferring regional coastal subsidence due to great plate boundary earthquakes: the suddenness and amount of submergence, the lateral extent of submerged tidal-wetland soils, the coincidence of submergence with tsunami deposits, and the degree of synchroneity of submergence events at widely spaced sites. Evaluation of such criteria at the Cascadia subduction zone indicates regional coastal subsidence during at least two great earthquakes. Evidence for a coseismic origin remains equivocal, however, for the many peat-mud contacts in Cascadia stratigraphic sequences that lack (1) contrasts in lithology or fossils indicative of more than half a meter of submergence, (2) well-studied tsunami deposits, or (3) precise ages needed for regional correlation. Paleoecologic studies of fossil assemblages are particularly important in estimating the size of sudden sea level changes recorded by abrupt peat-mud contacts and in helping to distinguish erosional and gradually formed contacts from coseismic contacts. Reconstruction of a history of great earthquakes for the Cascadia subduction zone will require rigorous application of the above criteria and many detailed investigations.

Journal of Geophysical Research B: Solid Earth↗
USGS2019

Chesapeake Bay impact structure—Development of "brim" sedimentation in a multilayered marine target

The late Eocene Chesapeake Bay impact structure was formed in a multilayered target of seawater underlain sequentially by a sediment layer and a rock layer in a continental-shelf environment. Impact effects in the “brim” (annular trough) surrounding and adjacent to the transient crater, between the transient crater rim and the outer margin, primarily were limited to the target-sediment layer. Analysis of published and new lithostratigraphic, biostratigraphic, sedimentologic, petrologic, and mineralogic studies of three core holes, and published studies of a fourth core hole, provided information for the interpretation of the impact processes, their interactions and relative timing, their resulting products, and sedimentation in the brim. Most studies of marine impact-crater materials have focused on those found in the central crater. There are relatively few large, complex marine craters, of which most display a wide brim around the central crater. However, most have been studied using minimal data sets. The large number of core holes and seismic profiles available for study of the Chesapeake Bay impact structure presents a special opportunity for research. The physical and chronologic records supplied by study of the sediment and rock cores of the Chesapeake Bay impact indicate that the effects of the initial, short-lived contact and compression and excavation stages of the impact event primarily were limited to the transient crater. Only secondary effects of these processes are evident in the brim. The preserved record of the brim was created primarily in the subsequent modification stage. In the brim, the records of early impact processes (e.g., outgoing tsunamis, overturned flap collapse) were modified or removed by later processes. Transported and rotated, large and small clasts of target sediments, and intervals of fluidized sands indicate that seismic shaking fractured and partially fluidized the Cretaceous and Paleogene target sediments, which led to their inward transport by collapse and lateral spreading toward the transient crater. The succeeding inward seawater-resurge flow quickly overtook and interacted with the lateral spreading, further facilitating sediment transport across the brim and into the transient crater. Variations in the cohesion and relative depth of the target sediments controlled their degree of disaggregation and redistribution during these events. Melt clasts and shocked and unshocked rock clasts in the resurge sediments indicate fallout from the ejecta curtain and plume. Basal parautochthonous remnant sections of target Cretaceous sediments in the brim thin toward the collapsed transient crater. Overlying seawater-resurge deposits consist primarily of diamictons that vary laterally in thickness, and vertically and laterally in maximum grain size. After cessation of resurge flow and re-establishment of pre-impact sea level, sandy sediment gravity flows moved from the margin to the center of the partially filled impact structure (shelf basin). The uppermost unit consists of stratified sediments deposited from suspension. Postimpact clayey silts cap the crater fill and record the return to shelf sedimentation at atypically large paleodepths within the shelf basin. An unresolved question involves a section of gravel and sand that overlies Neoproterozoic granite in the inner part of the brim in one core hole. This section may represent previously unrecognized, now parautochthonous Cretaceous sediments lying nonconformably above basement granite, or it may represent target sediments that were moved significant distances by lateral spreading above basement rocks or above a granite megaclast from the overturned flap. The Chesapeake Bay impact structure is perhaps the best documented example of the small group of multilayer, marine-target impacts formed in continental shelves or beneath epeiric seas.

Chesapeake Bay↗
USGS1999

Interaction of tectonic and depositional processes that control the evolution of the Iberian Gulf of Cadiz margin

This study provides an integrated view of the growth patterns and factors that controlled the evolution of the Gulf of Cadiz continental margin based on studies of the tectonic, sedimentologic and oceanographic history of the area. Seven sedimentary regimes are identified, but there are more extensive descriptions of the late Cenozoic regimes because of the larger data base. The regimes of the Mesozoic passive margin include carbonate platforms, which become mixed calcareous-terrigenous deposits during the Late Cretaceous-early Tertiary. The Oligocene and Early Miocene terrigenous regimes developed, in contrast, over the active and transcurrent margins near the African-Iberian plate boundary. The top of the Gulf of Cadiz olistostrome, emplaced in the Late Miocene, is used as a key horizon to define the 'post-orogenic' depositional regimes. The Late Miocene progradational margin regime is characterized by a large terrigenous sediment supply to the margin and coincides with the closing of the Miocene Atlantic-Mediterranean gateways. The terrigenous drift depositional regime of the Early Pliocene resulted from the occurrence of high eustatic sea level and the characteristics of the Mediterranean outflow currents that developed after the opening of the Strait of Gibraltar. The Late Pliocene and Quaternary regimes are dominated by sequences of deposits related to cycles of high and low sea levels. Deposition of shelf-margin deltas and slope wedges correlate with regressive and low sea level regimes caused by eustasy and subsidence. During the highstand regimes of the Holocene, inner shelf prograding deltas and deep-water sediment drifts were developed under the influence of the Atlantic inflow and Mediterranean outflow currents, respectively. A modern human cultural regime began 2000 years ago with the Roman occupation of Iberia; human cultural effects on sedimentary regimes may have equalled natural factors such as climate change. Interplay of tectonic and oceanographic controls dominated the evolution of the Cadiz margin during the Cenozoic. Depositional sequences formed where the tectonic setting provided the accommodation space and the shape of the deposits has been greatly influenced by the strong unidirectional Atlantic inflow currents on the shelf and Mediterranean outflow currents on the slope. The entire cycle of the inflow and outflow deposition along the margin has been controlled first by the tectonic evolution of the Betic and Rif gateways, which become closed during the Late Miocene, and after the Messinian by the opening of the Strait of Gibraltar. Strong current development during eustatic sea level highstands of the Pliocene and Quaternary has controlled deposition because of maximum sill depths at Gibraltar for water circulation. Lowstand sea levels slowed circulation and resulted in mud drapes over the slope and regressive stratigraphic sequences over the shelf. More recently, the human industrial revolution has caused heavy metal contamination of sediment and water over the Cadiz margin. Human activity also has affected sedimentation rates because of deforestation that caused increased depositional rates near undammed rivers and decreased rates where rivers have been dammed. Future research efforts will need to focus on: (1) the effect of increased Mediterranean outflow caused by river damming plus global warming and the increased outflow as a potential trigger for new ice ages; (2) assessments of geologic hazards for planning man-made shoreline structures, developing offshore petroleum resources and maintaining undersea communications cables; and (3) confirmation of the general geologic history of the Cadiz margin.

Marine Geology↗
USGS2011

The Holocene history of Nares Strait: Transition from glacial bay to Arctic-Atlantic throughflow

Retreat of glacier ice from Nares Strait and other straits in the Canadian Arctic Archipelago after the end of the last Ice Age initiated an important connection between the Arctic and the North Atlantic Oceans, allowing development of modern ocean circulation in Baffin Bay and the Labrador Sea. As low-salinity, nutrient-rich Arctic Water began to enter Baffin Bay, it contributed to the Baffin and Labrador currents flowing southward. This enhanced freshwater inflow must have influenced the sea ice regime and likely is responsible for poor calcium carbonate preservation that characterizes the Baffin Island margin today. Sedimentologic and paleoceanographic data from radiocarbon-dated core HLY03-05GC, Hall Basin, northern Nares Strait, document the timing and paleoenvironments surrounding the retreat of waning ice sheets from Nares Strait and opening of this connection between the Arctic Ocean and Baffin Bay. Hall Basin was deglaciated soon before 10,300 cal BP (calibrated years before present) and records ice-distal sedimentation in a glacial bay facing the Arctic Ocean until about 9,000 cal BP. Atlantic Water was present in Hall Basin during deglaciation, suggesting that it may have promoted ice retreat. A transitional unit with high ice-rafted debris content records the opening of Nares Strait at approximately 9,000 cal BP. High productivity in Hall Basin between 9,000 and 6,000 cal BP reflects reduced sea ice cover and duration as well as throughflow of nutrient-rich Pacific Water. The later Holocene is poorly resolved in the core, but slow sedimentation rates and heavier carbon isotope values support an interpretation of increased sea ice cover and decreased productivity during the Neoglacial period.

Nares Strait↗