Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Coal Preparation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1982

Determination of the true density of pulverized coal samples

A method using the gas-comparison pycnometer with helium gas as the penetrating medium measures precisely the true volume of a pulverized coal sample. The true density of a solid is calculated as the true unit volume of the solid exclusive of its pore space which is divided into the weight of the sample. The method is similar to that used to determine the density of refractory materials but the procedure is modified to yield precise density determinations of coal samples. These modifications diminish effects of trapped moisture and gases on the volume measurement. The helium gas-comparison pycnometer method is rapid, reliable, precise, and requires minimal analytical equipment and sample preparation, and also is non-destructive to the coal sample. Using this method, densities can be determined on coal samples of subbituminous to low-volatile bituminous rank and perhaps also on samples of lignite. The density of anthracite samples has not been determined by this method.

Open-File Report↗
USGS1995

Petrography, geochemistry, and depositional setting of the San Pedro and Santo Tomas coal zones: Anomalous algae-rich coals in the middle part of the Claiborne Group (Eocene) of Webb County, Texas

Two coal zones, the San Pedro and the overlying Santo Tomas, are present for nearly 35 km in outcrop, surface and underground mines, and shallow drill holes along the strike of the middle part of the Claiborne Group (Eocene) in Webb County, Texas. A sandstone-dominated interval of 25 to 35 m separates the two coal zones, which range up to 3 m in thickness. Each coal zone contains carbonaceous shales, thin (<0.75 m) impure coal beds, and thin (<0.85 m) but commercially significant nonbanded coal beds. The nonbanded coals are different from other Tertiary coals of the Gulf of Mexico Coastal Plain: unlike lignites that are typical of the older Wilcox Group (Paleocene-Eocene) and younger Jackson Group (Eocene), nonbanded coals of the Claiborne Group have high vitrinite-reflectance values (0.53 R max ) and high calorific yields (average 6670 kcal/kg or 12,000 Btu, dry basis). The coals are weakly agglomerating (free-swelling index is 1.5–2.0) and have an apparent rank of high-volatile bituminous. The coal-bearing portion of the middle Claiborne Group in the Rio Grande area represents a fining-upward transition from sandstone-dominated, marine-influenced, lower delta plain depositional environments to more inland, mudstone-rich, predominantly freshwater deltaic settings. Discontinuities within the San Pedro coal zone are attributed mainly to the influence of contemporaneous deposition of distributary mouth-bar sand bodies. The less variable nature of the Santo Tomas coal zone reflects its origin in the upper part of an interlobe basin that received only minor clastic influx. Petrographic attributes of the nonbanded coals indicate that they formed subaqueously in fresh to possibly brackish waters. A highly degraded groundmass composed of eugelinite is the main petrographic component (approximately 71%, mineral-matter-free basis). An enriched liptinite fraction (approximately 23%) probably accounts for unusually high calorific values. There is negligible inertinite. Petrographic study of polished blocks indicates that approximately 10 percent of the nonbanded coal from both coal zones is composed of green algae fructifications, which also occur in clastic rocks of the coal-bearing interval. Such algal material cannot be identified or quantified by conventional coal petrographic techniques that utilize particle pellets or by palynological analyses that include acid preparation.

International Journal of Coal Geology↗
USGS1954

Geology and coal deposits of the Shelburn quadrangle, Sullivan County, Indiana

The Shelburn quadrangle is the fifth in a series of quadrangle maps prepared as a part of a program by the Geological Survey, Indiana Department of Conservation, and the U.S. Geological Survey to appraise the coal resources of Indiana. The field work was done by the writer, assisted by Dick S. Horton and Robert E. Hurley, during the summer of 1949 and for a short period during the summer of 1950. Data on mines, records of past production, and records of exploratory drilling for coal and oil were provided by the operators in the quadrangle, whose help and advice has been most helpful in the preparation of this report. The Indiana Bureau of Mines and Mining provided much valuable information on abandoned mines in the quadrangle.

Indiana↗
USGS2019

Application of electron microscopy TEM and SEM for analysis of coals, organic-rich shales and carbonaceous matter

This paper provides a brief summary of the history, development and variety of applications of electron microscopy techniques to analyze coals, organic-rich shales, and carbonaceous materials. General construction and principles of operation of transmitted (TEM) and scanning electron microscope (SEM) are outlined, along with guidance on specimen preparation, and a brief overview of published TEM and SEM applications related to coal, shales, and carbonaceous materials. This work was accepted as the chapter 18.2 of International Committee for Coal and Organic Petrology Methods Handbook at the ICCP Plenary Session on September 27, 2018 in Brisbane (Australia).

International Journal of Coal Geology↗
USGS2005

Determination of total mercury in biological and geological samples

The analytical chemist is faced with several challenges when determining mercury in biological and geological materials. These challenges include widespread mercury contamination, both in the laboratory and the environment, possible losses of mercury during sample preparation and digestion, the wide range of mercury values commonly observed, ranging from the low nanogram per gram or per liter for background areas to hundreds of milligrams per kilogram in contaminated or ore-bearing areas, great matrix diversity, and sample heterogeneity1. These factors can be naturally occurring or anthropogenic, but must be addressed to provide a precise and accurate analysis. Although there are many instrumental methods available for the successful determination of mercury, no one technique will address all problems or all samples all of the time. The approach for the determination of mercury used at the U.S. Geological Survey, Crustal Imaging and Characterization Team, Denver Laboratories, utilizes a suite of complementary instrumental methods when approaching a study requiring mercury analyses. Typically, a study could require the analysis of waters, leachates or selective digestions of solids, vegetation, and biological materials such as tissue, bone, or shell, soils, rocks, sediments, coals, sludges, and(or) ashes. No one digestion or sample preparation method will be suitable for all of these matrices. The digestions typically employed at our laboratories include: (i) a closed-vessel microwave method using nitric acid and hydrogen peroxide, followed by digestion/dilution with a nitric acid/sodium dichromate solution, (ii) a robotic open test-tube digestion with nitric acid and sodium dichromate, (iii) a sealed Teflon? vessel with nitric acid and sodium dichromate, (iv) a sealed glass bottle with nitric acid and sodium dichromate, or (v) open test tube digestion with nitric and sulfuric acids and vanadium pentoxide. The common factor in all these digestions is that they are very oxidative to ensure the conversion of all mercury forms into Hg (II). Each method of digestion has its advantages and limitations. The method of detection used in our laboratories involves a combination of an in-house, custom, classic continuous-flow cold-vapor atomic absorption spectrometry (CVAAS), a commercially available, automated, flow-injection and a continuous flow cold-vapor atomic fluorescence spectrometry (CV-AFS) systems, and a relatively new, automated and integrated approach where solid or liquid samples are thermally decomposed under an oxygen atmosphere (a nitrogen atmosphere is used for coals) and the released mercury vapor trapped onto a gold gauze and then thermally released into an AAS system. Other less frequently used instrumental methods available for the determination of mercury include inductively coupled plasma ? optical emission spectrometry (ICP-OES), inductively couple plasma ? mass spectrometry (ICP-MS) (both solution nebulization and laser ablation), and instrumental neutron activation analysis (INAA). Results from two case studies involving the determination of mercury in the challenging matrices of biological materials will be presented. These will include fillet, liver and stomach-content samples from grayling for a baseline/background study in Alaska, and samples of meat tissue and shell material from Tanner crabs from Glacier Bay, Alaska. These studies show that the method of digestion is more important than a very sensitive detection limit for mercury.

Open-File Report↗
USGS1984

Hydrology of Area 62, Northern Great Plains and Rocky Mountain Coal Provinces, New Mexico and Arizona

This report summarizes available hydrologic data for Area 62 and will aid leasing decisions, and the preparation and appraisal of environmental impact studies and mine-permit applications. Area 62 is located at the southern end of the Rocky Mountain Coal Province in parts of New Mexico and Arizona and includes approximately 9,500 square miles. Surface mining alters, at least temporarily, the environment; if the areas are unreclaimed, there can be long-term environmental consequences. The land-ownership pattern in Area 62 is complicated. The checkerboard pattern created by several types of ownership makes effective management of these lands difficult. The climate generally is semiarid with average annual precipitation ranging from 10 to 20 inches. Pinons, junipers, and grasslands cover most of the area, and much of it is used for grazing by livestock. Soils vary with landscape, differing from flood plains and hillslopes to mountain slopes. The major structural features of this area were largely developed during middle Tertiary time. The main structural features are the southern San Juan Basin and the Mogollon slope. Coal-bearing rocks are present in four Cretaceous rock units of the Mesaverde Group: the Gallup Sandstone, the Dileo Coal Member, and the Gibson Coal Member of the Crevasse Canyon Formation, and the Cleary Coal Member of the Menefee Formation. Area 62 is drained by Black Creek, the Puerco River, the Zuni River, Carrizo Wash-Largo Creek, and the Rio San Jose. Only at the headwaters of the Zuni River is the flow perennial. The streamflow-gaging station network consists of 25 stations operated for a variety of needs. Streamflow changes throughout the year with variation related directly to rainfall and snowmelt. Base flow in Area 62 is zero indicating no significant ground-water discharge. Mountainous areas contribute the highest mean annual runoff of 1.0 inch. Very few water-quality data are available for the surface-water stations. Of the nine surface-water stations that have water-quality data, only one has chemical analyses from more than 10 samples. Therefore, sufficient data to characterize the area in detail are not available. Suspended sediment data are available only for a few surface- water stations in the area. Erosion rates generally are less than 1 acre-foot per square mile per year. Greater erosion rates are found within the badland areas. Water levels are periodically measured at 21 selected wells in Area 62. These observation wells are located mostly along the Rio San Jose and northeast of Gallup, New Mexico. The recharge to ground-water aquifers generally coincide with areas of greater precipitation in the mountainous areas. Depth to water below land surface is generally less than 200 feet. Well yields of 100 gallons per minute are common in most of the area. Ground-water quality is variable both within each aquifer and between aquifers. Water quality generally is best near recharge areas. Historical and current data related to stream discharge, water quality, and suspended sediment are available from computer files in the U.S. Geological Survey's National Water Data Storage and Retrieval System (WATSTORE) and through the National Water Data Exchange (NAWDEX).

Open-File Report↗
USGS1984

Hydrology of Area 62, Northern Great Plains and Rocky Mountain Coal Provinces, New Mexico and Arizona

This report summarizes available hydrologic data for Area 62 and will aid leasing decisions, and the preparation and appraisal of environmental impact studies and mine-permit applications. Area 62 is located at the southern end of the Rocky Mountain Coal Province in parts of New Mexico and Arizona and includes approximately 9,500 square miles. Surface mining alters, at least temporarily, the environment; if the areas are unreclaimed, there can be long-term environmental consequences. The land-ownership pattern in Area 62 is complicated. The checkerboard pattern created by several types of ownership makes effective management of these lands difficult. The climate generally is semiarid with average annual precipitation ranging from 10 to 20 inches. Pinons, junipers, and grasslands cover most of the area, and much of it is used for grazing by livestock. Soils vary with landscape, differing from flood plains and hillslopes to mountain slopes. The major structural features of this area were largely developed during middle Tertiary time. The main structural features are the southern San Juan Basin and the Mogollon slope. Coal-bearing rocks are present in four Cretaceous rock units of the Mesaverde Group: the Gallup Sandstone, the Dileo Coal Member, and the Gibson Coal Member of the Crevasse Canyon Formation, and the Cleary Coal Member of the Menefee Formation. Area 62 is drained by Black Creek, the Puerco River, the Zuni River, Carrizo Wash-Largo Creek, and the Rio San Jose. Only at the headwaters of the Zuni River is the flow perennial. The streamflow-gaging station network consists of 25 stations operated for a variety of needs. Streamflow changes throughout the year with variation related directly to rainfall and snowmelt. Base flow in Area 62 is zero indicating no significant ground-water discharge. Mountainous areas contribute the highest mean annual runoff of 1.0 inch. Very few water-quality data are available for the surface-water stations. Of the nine surface-water stations that have water-quality data, only one has chemical analyses from more than 10 samples. Therefore, sufficient data to characterize the area in detail are not available. Suspended sediment data are available only for a few surface- water stations in the area. Erosion rates generally are less than 1 acre-foot per square mile per year. Greater erosion rates are found within the badland areas. Water levels are periodically measured at 21 selected wells in Area 62. These observation wells are located mostly along the Rio San Jose and northeast of Gallup, New Mexico. The recharge to ground-water aquifers generally coincide with areas of greater precipitation in the mountainous areas. Depth to water below land surface is generally less than 200 feet. Well yields of 100 gallons per minute are common in most of the area. Ground-water quality is variable both within each aquifer and between aquifers. Water quality generally is best near recharge areas. Historical and current data related to stream discharge, water quality, and suspended sediment are available from computer files in the U.S. Geological Survey's National Water Data Storage and Retrieval System (WATSTORE) and through the National Water Data Exchange (NAWDEX).

Water-Resources Investigations Report↗
USGS1979

Hydrologic reconnaissance of the Wasatch Plateau-Book Cliffs coal-fields area, Utah

Data obtained during a hydrologic reconnaissance in 1975-77 in the Wasatch Plateau-Book Cliffs coal area of Utah were correlated with existing long-term data. Maps were prepared showing average precipitation, average streamflow, stream temperature, ground- and surface-water quality, sediment yield, and geology. Recommendations were made for additional study and suggested approaches for continued monitoring in the coal areas. During the 1931-75 water years, the minimum discharges for the five major streams that head in the area ranged from about 12,000 to 26,000 acre-feet per year, and the maximum discharges ranged from about 59,000 to 315,000 acre-feet per year. Correlations indicate that 3 years of low-flow records at stream sites in the Wasatch Plateau would allow the development of relationships with long-term sites that can be used to estimate future low-flow records within a standard error of about 20 percent. Most water-quality degradation in streams occurs along the flanks of the Wasatch Plateau and Book Cliffs. In the uplands, dissolved-solids concentrations generally ranged from less than 100 to about 250 milligrams per liter, and in the lowlands the concentrations ranged from about 250 to more than 6,000 milligrams per liter. In the lowland areas, the Ferron Sandstone Member of the Mancos Shale appears to have the most potential for subsurface development of water of suitable chemical quality for human consumption. Three wells in the Ferron yielded water with dissolved-solids concentrations ranging from about 650 to 1,230 milligrams per liter.

Utah↗
USGS2018

Hydrologic assessment and numerical simulation of groundwater flow, San Juan Mine, San Juan County, New Mexico, 2010–13

Coal combustion byproducts (CCBs), which are composed of fly ash, bottom ash, and flue gas desulfurization material, produced at the coal-fired San Juan Generating Station (SJGS), located in San Juan County, New Mexico, have been buried in former surface-mine pits at the San Juan Mine, also referred to as the San Juan Coal Mine, since operations began in the early 1970s. This report, prepared by the U.S. Geological Survey in cooperation with the Mining and Minerals Division of the New Mexico Energy, Minerals and Natural Resources Department, describes results of a hydrogeologic assessment, including numerical groundwater modeling, to identify the timing of groundwater recovery and potential pathways for groundwater transport of metals that may be leached from stored CCBs and reach hydrologic receptors after operations cease. Data collected for the hydrologic assessment indicate that groundwater in at least one centrally located reclaimed surface-mining pit has already begun to recover. The U.S. Geological Survey numerical modeling package MODFLOW–NWT was used with MODPATH particle-tracking software to identify advective flow paths from CCB storage areas toward potential hydrologic receptors. Results indicate that groundwater at CCB storage areas will recover to the former steady state, or in some locations, groundwater may recover to a new steady state in 6,600 to 10,600 years at variable rates depending on the proximity to a residual cone-of-groundwater depression caused by mine dewatering and regional oil and gas pumping as well as on actual, rather than estimated, groundwater recharge and evapotranspirational losses. Advective particle-track modeling indicates that the number of particles and rates of advective transport will vary depending on hydraulic properties of the mine spoil, particularly hydraulic conductivity and porosity. Modeling results from the most conservative scenario indicate that particles can migrate from CCB repositories to either the Shumway Arroyo alluvium after 1,320 years and from there to the San Juan River alluvium after 1,520 years or from southernmost CCB repositories directly to the San Juan River alluvium after 2,400 years after the cessation of mining.

New Mexico↗
USGS1952

Stratigraphic sections of the Phosphoria formation in Wyoming, 1947-48

As part of a comprehensive investigation of the phosphate deposits of the western field begun in 1947, the U. S. Geological Survey has measured and sampled the Permian Phosphoria formation at many localities in Wyoming and adjacent states. Because these data will not be fully synthesized for many years, segments of the data, accompanied by little or no interpretation, will be published as preliminary reports as they are assembled. This report, which contains abstracts of some of the sections measured in western Wyoming (pl. 1), is one of this series. The field and laboratory procedures adopted in these investigations are described rather fully in a companion report (McKelvey and others, 1952a). Many people have taken part in this investigation. R. M. Campbell, R. A. Gulbrandsen, R. A. Harris, D. M. Larrabee, F. W. O'Malley, O. A. Payne, R. S. Sears, R. P. Sheldon, and R. A. Smart participated in the description of the strata and the collection of the samples referred to in this report. D. B. Dimick, H. A. Larsen, and T. K. Rigby assisted in the preparation of exposures and the crushing and splitting of samples in the field. The laboratory preparation of samples for chemical analysis was done in Denver, Colo., under the direction of W. P. Huleatt. Most of the P 2 O 5 and acid-insoluble analyses were made for the Survey by the U. S. Bureau of Mines at the Northwest Electrodevelopment Laboratory, Albany, Oreg., under the direction of S. M. Shelton and M. L. Wright. Most of the Al 2 O 3 , Fe 2 O 3 , and loss-on-ignition analyses were made by the Trace Elements Section laboratory of the Survey in Washington, D. C., under the direction of J. C. Rabbitt by chemists I. Barlow, A. Caemmerer, J. Greene, F. S. Grimadli, N. Guttag, H. Levine, H. Mela, Jr., and R. G. Milkey, and most of the spectrographic reports were prepared in this laboratory by C. L. Waring. The samples from one locality (Coal Canyon) were analyzed for P 2 O 5 , Al 2 O 3 , Fe 2 O 3 , V 2 O 5 , F, loss on ignition, and acid insoluble in the Chemical Laboratory of the Tennessee Valley Authority at Wilson Dam, Alabama, and spectrographically by D. M. Mortimer, of the Bureau of Mines at Albany. Compilation of the data has been largely by R. P. Sheldon and F. D. Frieske under the supervision of R. W. Swanson. Organization of the tabular data has been largely by Anita Cozzetto.

Wyoming↗
USGS1986

Thermal maturity map of the lower part of the Upper Cretaceous Mesaverde Group, Uintah Basin, Utah

The ability of rock to generate oil and gas is directly related to the type and quantity of kerogen and to its thermal maturity; therefore, thermal maturity is a commonly used tool for oil and gas exploration. The purpose of this study ws to provide a thermal-maturity map for the lower part of the Upper Cretaceous Mesaverde Group in the eastern part of the Uinta Basin. Prior to this study, thermal-maturity data were not available for the Uinta Basin. This study uses coal rank to show the thermal maturity of the associated rocks. The map was prepared in cooperation with the U.S. Department of Energy under its western gas sands project.

Utah↗
USGS2007

New vitrinite reflectance data for the Bighorn Basin, north-central Wyoming and south-central Montana

The Bighorn Basin is a large Laramide (Late Cretaceous through Eocene) structural and sedimentary basin that encompasses about 10,400 mi2 in north-central Wyoming and south-central Montana (fig. 1). Important conventional oil and gas resources have been discovered and produced from reservoirs ranging in age from Cambrian through Tertiary (Fox and Dolton, 1989, 1996a, b; De Bruin, 1993). In addition, a potential unconventional basin-centered gas accumulation may be present in Cretaceous reservoirs (Johnson and Finn, 1998; Johnson and others, 1999). The purpose of this report is to present new vitrinite reflectance data to be used in support of the U.S Geological Survey’s assessment of undiscovered oil and gas resources of the Bighorn Basin. These new data supplement previously published data by Nuccio and Finn (1998), and Yin (1997), and lead to a better understanding and characterization of the thermal maturation and burial history of potential source rocks. Eighty-nine samples of Cretaceous and Tertiary strata (fig. 2) were collected and analyzed—15 samples were from outcrops around the margins of the basin and 74 samples were well cuttings (fig. 1). Forty-one of the samples were shale, two were carbonaceous shale, and the remainder from coal. All samples were analyzed by vitrinite reflectance to determine levels of thermal maturation. Preparation of samples for reflectance analysis required (1) crushing the larger pieces into 0.25-to 1-mm pieces, (2) casting the pieces with epoxy in pre-cut and drilled plugs, and (3) curing the samples overnight. Subsequently, a four-step grinding and polishing process was implemented that included sanding with progressively finer sandpaper (60 and 600 grit) followed with a two-step polishing process (0.3 and 0.05 micron). Vitrinite reflectance measurements were determined at 500 X magnification using plane-polarized incident white light and a 546-nm monochromatic filter in immersion oil. For samples containing sufficiently high quality vitrinite, at least 25 measurements were recorded. For samples of poorer quality, either due to a poor polish or to the presence of mineral or other inorganic material, fewer measurements were recorded. Analytical results are given in tables 1 and 2.

Open-File Report↗
USGS1981

Hydrologic reconnaissance of the Wasatch Plateau-Book Cliffs coal-fields area, Utah

Data obtained during a hydrologic reconnaissance in 1975-77 in the Wasatch Plateau-Book Cliffs coal-fields area of Utah were correlated with existing long-term data. Maps were prepared showing average precipitation, average streamflow, stream temperature, ground- and surface-water quality, sediment yield, and geology. Recommendations were made for additional study and suggested approaches for continued monitoring in the coalfields areas. moDuring the 1931-75 water years, the minimum discharges for the five major streams that head in the area ranged from about 12,000 to 26,000 acre-feet per year, and the maximum discharges ranged from about 59,000 to 315,000 acre-feet per year. Correlations indicate that 3 years of low-flow records at stream sites in the Wasatch Plateau would allow the development of relationships with long-term sites that can be used to estimate future low-flow records within a standard error of about 20 percent. Most water-quality degradation in streams occurs along the flanks of the Wasatch Plateau and Book Cliffs. In the uplands, dissolved-solids concentrations generally ranged from less than 100 to about 250 milligrams per liter, and in the lowlands, the concentrations ranged from about 250 to more than 6,000 milligrams per liter. Most springs in the Wasatch Plateau and Book Cliffs discharge from the Star Point Sandstone or younger formations, and the water generally contains less than about 1,000 milligrams per liter of dissolved solids. The discharges of 65 springs ranged from about 0.2 to 200 gallons per minute. The Blackhawk Formation, which is the principal coal-bearing formation, produces water in many of the mines. The dissolved-solids concentration in water discharging from springs and mines in the Blackhawk ranged from about 60 to 800 milligrams per liter. In the lowland areas, the Ferron Sandstone Member of the Maneos Shale appears to have the most potential for subsurface development of water of suitable chemical quality for human consumption. Three wells in the Ferron yielded water with dissolved-solids concentrations ranging from about 650 to 1,230 milligrams per liter.

Utah↗
USGS2014

Modeling uncertainty in coal resource assessments, with an application to a central area of the Gillette coal field, Wyoming

Standards for the public disclosure of mineral resources and reserves do not require the use of any specific methodology when it comes to estimating the reliability of the resources. Unbeknownst to most intended recipients of resource appraisals, such freedom commonly results in subjective opinions or estimations based on suboptimal approaches, such as use of distance methods. This report presents the results of a study of the third of three coal deposits in which drilling density has been increased one order of magnitude in three stages. Applying geostatistical simulation, the densest dataset was used to check the results obtained by modeling the sparser drillings. We have come up with two summary displays of results based on the same simulations, which individually and combined provide a better assessment of uncertainty than traditional qualitative resource classifications: (a) a display of cell 90 percent confidence interval versus cumulative cell tonnage, and (b) a histogram of total resources. The first graph allows classification of data into any number of bins with dividers to be decided by the assessor on the basis of a discriminating variable that is statistically accepted as a measure of uncertainty, thereby improving the quality and flexibility of the modeling. The second display expands the scope of the modeling by providing a quantitative measure of uncertainty for total tonnage, which is a fundamental concern for stockholders, geologists, and decision makers. Our approach allows us to correctly model uncertainty issues not possible to predict with distance methods, such as (a) different levels of uncertainty for individual beds with the same pattern and density of drill holes, (b) different local degrees of reduction of uncertainty with drilling densification reflecting fluctuation in the complexity of the geology, (c) average reduction in uncertainty at a disproportionately lesser rate than the reduction in area per drill hole, (d) the proportional effect of higher uncertainty in areas of higher tonnages, despite a regular drilling pattern, (e) the possibility of a local increase in uncertainty despite drilling densification to reflect a more complex geology as the deposit is known in more detail, and (f) for exactly the same drilling pattern, tonnage per individual beds with different uncertainty than the aggregated tonnage. These results should be considered realistic improvements over distance methods used for quantitative classification of uncertainty in coal resource, such as U.S. Geological Survey Circular 891. 1 The approach should be a welcome addition to the toolkit of Competent Persons preparing public disclosures according to international mineral codes such as those promoted by the Combined Reserves International Reporting Standards Committee 2 and the Joint Ore Reserve Committee. 3 1 Wood, G.H., Jr., Kehn, T.M., Carter, M.D., and Culbertson, W.C., 1983, Coal resources classification system of the U.S. Geological Survey: U.S. Geological Survey Circular 891, 65 p. 2 CRIRSCO (Combined Reserves International Reporting Standards Committee), 2013, International reporting template for the public reporting of exploration results, mineral resources and mineral reserves: Accessed February 2014 at http://www.crirsco.com/crirsco_template_may2013.pdf. 3 JORC (Joint Ore Reserves Committee), 2012, Australasian code for reporting of exploration results, mineral resources and ore reserves: Accessed September 2014 at http://www.jorc.org/docs/jorc_code2012.pdf.

Wyoming↗
USGS2025

Preparation and analysis methods for fish tissue collected from Lake Koocanusa, Montana

Lake Koocanusa, a reservoir, receives mine wastes from metallurgical coal mines in the Elk River Valley of British Columbia, Canada. Selenium and other elements discharged by the mines into the waters of the United States can pose unknown risks to aquatic life. The U.S. Geological Survey Wyoming-Montana Water Science Center can collaborate with Montana Fish, Wildlife and Parks and other State and Federal agencies to design studies and to collect fish tissues to help fill this knowledge gap. This report describes the processes, techniques, and methods used to collect and analyze fish tissue collected from Lake Koocanusa; and procedures used to review and manage data, including quality assurance and quality control procedures used by the U.S. Geological Survey Wyoming-Montana Water Science Center and supporting analytical laboratories. These fish tissue collections began in 2021.

Montana↗
USGS2014

Thermal maturity patterns in Pennsylvanian coal-bearing rocks in Alabama, Tennessee, Kentucky, Virginia, West Virginia, Ohio, Maryland, and Pennsylvania

Thermal maturation patterns of Pennsylvanian strata in the Appalachian basin and part of the Black Warrior basin were determined by compiling previously published and unpublished percent-vitrinite-reflectance (%R 0 ) measurements and preparing isograd maps on the basis of the measurements. The isograd values range from 0.6 %R 0 in Ohio and the western side of the Eastern Kentucky coal field to 5.5 %R 0 in the Southern field in the Pennsylvania Anthracite region, Schuylkill County, Pa. The vitrinite-reflectance values correspond to the American Society of Testing Materials (ASTM) coal-rank classes of high-volatile C bituminous to meta-anthracite, respectively. In general, the isograds show that thermal maturity patterns of Pennsylvanian coals within the Appalachian basin generally decrease from east to west. In the Black Warrior basin of Alabama, the isograds show a circular pattern with the highest values (greater than 1.6 %R 0 ) centered in Jefferson County, Ala. Most of the observed patterns can be explained by variations in the depth of burial, variations in geothermal gradient, or a combination of both; however, there are at least four areas of higher ranking coal in the Appalachian basin that are difficult to explain by these two processes alone: (1) a set of west- to northwest-trending salients centered in Somerset, Cambria, and Fayette Counties, Pa.; (2) an elliptically shaped, northeast-trending area centered in southern West Virginia and western Virginia; (3) the Pennsylvania Anthracite region in eastern Pennsylvania; and (4) the eastern part of the Black Warrior coal field in Alabama. The areas of high-ranking coal in southwestern Pennsylvania, the Black Warrior coal field, and the Pennsylvania Anthracite region are interpreted here to represent areas of higher paleo-heat flow related to syntectonic movement of hot fluids towards the foreland associated with Alleghanian deformation. In addition to the higher heat flow from these fluids, the Pennsylvania Anthracite region also was buried more deeply than other parts of the Appalachian basin. The area of high rank coal in southwestern Virginia probably was controlled primarily by overburden thickness, but may also have been influenced by higher geothermal gradients.

Appalacian basin↗
USGS1982

Obtaining maps and data from the U.S. Geological Survey

The U.S. Geological Survey produces a variety of resource information for the United States. This includes many data bases of particular interest to planners such as land use and terrain information prepared by the National Mapping Division, water quantity and quality data collected by Water Resources Division, and coal resource information gathered by the Geologic Division. These data are stored in various forms, and information on their availability can be obtained from appropriate offices in the U.S. Geological Survey as well as from USGS Circular 777. These data have been used for the management, development, and monitoring of our Nation's resources by Federal, State, and local agencies.

Computers, Environment and Urban Systems↗