SEARCH · Geology Reports
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We provide an initial checklist of the herpetofauna of Baramita, a lowland rainforest site in the Northwest Region of Guyana. Twenty-five amphibian and 28 reptile species were collected during two separate dry-season visits. New country records for two species of snakes are documented, contributing to the knowledge on the incompletely known herpetofauna of Guyana.
The habitat in the vicinity of Kurupukari, on the Essequibo River in central Guyana, is tall evergreen lowland forest. The area has suffered some human disturbance from agriculture, road construction and ferry activity. The area was sampled for 10 days in 1990 and 12 days in 1997; seven days in rainy season and 15 in dry season. During this sampling 23 anuran and 17 reptile species were collected. Some differences exist between species collected on either side of the river. Comparisons are made with collections from other locations in Guyana.
This is a report on the state of the art methodology and on questions that arise while one is preparing to use aircraft in a biotelemetry study. In general the first step in preparing to mount an antenna on an aircraft is to consult with a certified aircraft mechanic. Aircraft certification is discussed to provide background information concerning the role of the Federal Aviation Administration (FAA) in regulating the use of biotelemetry antennas on aircraft. However, approval of any specific design of antenna mount rests with local FAA authority. Airplane and helicopter antenna attachments are described. Performance of the receiving antenna system is discussed with emphasis on how variables as aircraft type and antenna configuration may influence reception. The side-looking vs. front-looking antenna configuration and the VHF vs. HF frequency band are generally recommended for most aerial tracking studies. Characteristics of receivers, transmitters, and antennas that might influence tracking are discussed. Specific topics such as calibration of receivers and transmitter quality control are considered. Suggestions in preparing for and conducting tracking flights that will improve overall efficiency and safety are presented. Search techniques, including procedures for conducting large and specific area surveys as well as methods to improve and evaluate search efficiency, are discussed. A concluding section considers special topics such as low-level operations and the use of helicopters. Diagrams of antenna mounts, equipment check-off lists, and antenna test procedures are included as appendices.
As part of an investigation of the stratigraphic and environmental distributions of siliceous algal resting cysts, we have assembled this bibliography. The emphasis is on papers that illustrate these cysts, and our annotation concentrates on the nature of the illustrations. In some cases, we have also listed taxonomic names of the species illustrated in the paper, as well as those of any new species described, but this part of the annotation is not yet complete. The taxonomic names given here are always those given by the original author. The references have been selected by starting with a few papers and extracting relevant titles from their reference lists. We have included not only relevant works, but also a few that sounded relevant but turned out not to be. This bibliography is, we believe, fairly complete for references that describe fossil occurrences of cysts, but much less thorough for the taxonomic literature. The list of references is still evolving, and we welcome additions or corrections. We have checked and verified many of the references listed here; those that we have not yet seen are indicated by an asterisk preceding the authorship. We have also indicated the source of each reference which we have not seen. Most such references were found in the reference lists of other papers listed here. Other references have been taken from the VanLandingham bibliography, which is an unpublished manuscript on file at the Diatom Library of the California Academy of Sciences in San Francisco. We wish to thank Mrs. Margaret Hanna, curator of the Diatom Library at the California Academy of Sciences (San Francisco) and Mrs. Jacquelyn Freeberg, of the USGS Menlo Park Library, for help in locating many of the references, which are often tantalizingly obscure. Some of the references are incomplete; they have been included anyway in order to preserve as much information as possible. For the same reason, the bibliographic style of the references is not consistent throughout; we prefer to include such information as the authors' full names and issue numbers of journals when we have it available, rather than discard good information about one paper just because we lack similar information about another.
EXPLANATION The purpose of developing a new 10m resolution digital elevation model (DEM) of the Charleston Region was to more accurately depict geologic structure, surfical geology, and landforms of the Charleston County Region. Previously, many areas northeast and southwest of Charleston were originally mapped with a 20 foot contour interval. As a result, large areas within the National Elevation Dataset (NED) depict flat terraced topography where there was a lack of higher resolution elevation data. To overcome these data voids, the new DEM is supplemented with additional elevation data and break-lines derived from aerial photography and topographic maps. The resultant DEM is stored as a raster grid at uniform 10m horizontal resolution. The elevation model contained in this publication was prodcued utilizing the ANUDEM algorthim. ANUDEM allows for the inclusion of contours, streams, rivers, lake and water body polygons as well as spot height data to control the development of the elevation model. A preliminary statistical analysis using over 788 vertical elevation check points, primarily located in the northeastern part of the study area, derived from USGS 7.5 Minute Topographic maps reveals that the final DEM, has a vertical accuracy of ?3.27 meters. A table listing the elevation comparison between the elevation check points and the final DEM is provided.
The many individual salamanders, frogs, caecilians, and their larvae encountered during the course of an inventory or monitoring project will have to be identified to species. Depending on the goals and sampling method(s) used, some individuals will be identified from a distance by their calls, others will be handled. At the same time, some will be marked for recapture, and others will be sampled as vouchers. For each, certain minimum data should be recorded. In this section, data pertaining to locality and sampling methodology are considered, information on microhabitats and specimen vouchers is covered in sections that follow. I feel strongly that the data outlined here should be the minimum for any project. Investigators with specific goals may require additional types of data as well. Standardized, printed sheets containing the required data categories provide a convenient, inexpensive, and effective way to ensure that all the desired information is recorded in a consistent format, Data sheets should be well organized, printed on good-quality paper (75%-100% cotton content) and include extra space (e.g., other side of sheet) for notes that do not fit preestablished categories Data should be recorded in the field with permanent (waterproof) ink as simply and directly as possible. I strongly recommend against the use of data codes in the field; it is too easy to forget codes or to enter the wrong code. Original data sheets can be photocopied for security, but they should not be copied by hand. If data are to be coded for computer analysis, the original or photocopied sheets should be used for data entry to minimize transcription errors. Some workers prefer recording information on small tape recorders; this also works well if a list of the standard data categories is checked during taping to ensure that all required information is recorded. Information recorded on tapes should be transcribed to data sheets or into a computer within 24 hours of the sample.
The documentation of a computer code for the numerical solution of the linear diffusion equation in one or two dimensions in Cartesian or cylindrical coordinates is presented. Applications of the program include molecular diffusion, heat conduction, and fluid flow in confined systems. The flow media may be anisotropic and heterogeneous. The model is formulated by replacing the continuous linear diffusion equation by discrete finite-difference approximations at each node in a block-centered grid. The resulting matrix equation is solved by the method of preconditioned conjugate gradients. The conjugate gradient method does not require the estimation of iteration parameters and is guaranteed convergent in the absence of rounding error. The matrixes are preconditioned to decrease the steps to convergence. The model allows the specification of any number of boundary conditions for any number of stress periods, and the output of a summary table for selected nodes showing flux and the concentration of the flux quantity for each time step. The model is written in a modular format for ease of modification. The model was verified by comparison of numerical and analytical solutions for cases of molecular diffusion, two-dimensional heat transfer, and axisymmetric radial saturated fluid flow. Application of the model to a hypothetical two-dimensional field situation of gas diffusion in the unsaturated zone is demonstrated. The input and output files are included as a check on program installation. The definition of variables, input requirements, flow chart, and program listing are included in the attachments. (USGS)
Priority Geographic Area: The outer continental shelf and upper continental slope from Canada/U.S. border offshore Washington State to the Mendocino Fracture Zone (Northern California), entirely within the U.S. Exclusive Economic Zone (EEZ), from the outermost shelf to at least 2000 m water depth (Figure 1). Description of Priority Area: Since 2015, over a thousand water column gas plumes originating at seafloor gas seeps have been discovered landward of the Cascadia deformation front (e.g., Embley et al., 2016; Johnson et al., 2015, 2019; Merle and Embley, 2016; NA-95 Cruise Report, 2018; Riedel et al., 2018), adding to those that had long been known on Hydrate Ridge (e.g., Heeschen et al., 2003; Tréhu et al., 2004). The recently-discovered seeps stretch from offshore Vancouver Island to the Mendocino Fracture Zone and from the outer shelf to ~2000 m water depth, occurring both landward and seaward of the nominal limit for gas hydrate stability zone on the upper continental slope (Figure 1). Hundreds of seeps likely remain undiscovered. Water column imaging is incomplete both within the target geographic area and farther seaward, between the 2000 m isobath and the deformation front, which is the subject of an imaging study described in a white paper by Watt et al. The recently-discovered Cascadia Margin cold seeps partially overlap an important active margin gas hydrate province (Spence et al., 2001; Tréhu et al., 2003, 2004), as well as an area where sediments on the North American plate are folded and faulted and affected by fluids generated in the subduction complex beneath the Cascadia forearc (e.g., Saffer and Tobin, 2011). Several Ocean Drilling Program expeditions have focused on hydrate systems offshore Vancouver and Oregon (e.g., Riedel et al., 2009; Tréhu et al., 2004) and on the connection between the shallow and deep hydrogeologic systems. Cabled observatories now continuously monitor physical, chemical, and venting processes on south Hydrate Ridge (OOI; e.g., Philip et al., 2016a) and offshore Vancouver Island (NEPTUNE; e.g. Römer et al., 2016). Outside of these well-studied gas hydrate areas, a subset of the recently-discovered Cascadia seeps, including some that we visited with R/V Falkor in 2019 (e.g., https://schmidtocean.org/cruise/methane-seeps-at-edge-of-hydrate-stability/), also likely emit methane associated with shallow subseafloor gas hydrate systems. Other seeps are delivering not only methane, but also deep-derived gases (Baumberger et al., 2018, 2020) to the seafloor. Many Cascadia Margin seeps have also been recognized at water depths too shallow (e.g., 175 m) to be connected to gas hydrate dynamics. These seeps are postulated to be emitting gas and fluids that originated deep in accretionary wedge before migrating up normal faults generated during forearc extension associated with large earthquakes (Johnson et al., 2019). Only a small fraction of the recently discovered U.S. Cascadia Margin water column gas plumes has so far been verified by ROVs (Hercules from E/V Nautilus in 2016 and 2018; SuBastian from R/V Falkor in 2018 and 2019) to correspond to seafloor seeps. Careful scientific mapping, investigation, and sampling at the seeps have also been limited (e.g., Baumberger et al., 2018, 2020; Merle and Embley, 2016; Seabrook et al., 2018; Greinert et al. 2019). This white paper focuses on expanding exploration of already-identified U.S. Cascadia Margin cold seeps through a multipronged and multidisciplinary discovery program that could be accomplished with a variety of NOAA assets. The goals of the proposed exploration activities are to develop high-resolution maps of seep fields from deep ocean vehicles; to verify (and sample) seafloor gas emissions at the locations of water column plumes for compositional and isotopic studies; to map, sample, and conduct analyses on chemosynthetic communities and deep-sea coral habitats near seep sites to document species distributions and habitats as a function of depth and latitude along the margin; to collect seep geologic samples that can constrain the timing of methane emissions through geochronology; and to record environmental data (e.g., CTD) near the seafloor and in the water column above the seeps. Seafloor mapping using shipboard systems (multibeam/backscatter) would be needed to characterize seafloor features near seep sites. Water column imaging (EK60/80 and/or multibeam WCD data) conducted before and after seafloor explorations would capture active methane plumes and constrain temporal variations in seep emissions (e.g., Kannberg et al., 2013; Philip et al., 2016a, 2016b), which are known to vary on time scales as rapid as tidal cycles on this margin (e.g., Römer et al., 2016). What are the characterization and data needs in this area? Check all that apply: __x_ Biology, Geology, Physical Oceanography, Chemistry ___ Marine Archaeology ___ Other Provide a list or brief description of the data needed within this area, from your perspective: 1. Water column backscatter to image active gas plumes 2. High-resolution multibeam bathymetry, seafloor backscatter, and shallow sub-bottom imaging 3. Visual characterization and ground truthing of potential seeps, including high-resolution mapping and photography from near-seafloor vehicles; collection of seep-associated species, corals, sediments, authigenic carbonates, gases, and seawater Describe relevance to national security, conservation, and/or the economy: The Cascadia margin seeps provide significant ecosystem services, including habitat for commercially important fishes and support for diversity along the continental margin. Methane seeps are also biological hotspots for krill, plankton, and crustaceans, which in turn sustain higher trophic levels (e.g., whales). Methane-derived authigenic carbonates serve as a hard substrate for deep-sea corals and sponges on millennial time scales. The studies proposed here will elucidate the relationship among seep environments, deep-sea corals, sponges, fisheries, and other organisms and provide new insight into subduction zone and hydrate-associated fluids in this important seismogenic zone. The studies address fishery management concerns and inform future conservation of sensitive species (e.g., deep-sea corals) and benthic habitats. From your perspective, what makes this area unique? The Cascadia Margin seeps are a critical component of the leaky margin that stretches from Baja California to the Aleutian Arc along the Pacific coastline of North America. Cold seeps have been intensely studied on the Gulf of Mexico and U.S. Atlantic passive margins with a focus on chemosynthetic communities, deep-sea corals, and leakage of microbially-generated and/or thermogenic hydrocarbons; however, the recently-discovered Cascadia Margin seeps, as well as active margin seep systems in general, remain more poorly characterized. Such seeps not only contribute to the ocean carbon cycle (e.g., Pohlman et al., 2011), thereby fueling the base of the food chain in these settings, but also emit subduction zone fluids that provide clues about processes within the seismogenic zone and the accretionary complex. The Cascadia seeps area allows both biological (e.g., benthic habitats, coral distributions) and physical processes (e.g., generation of subduction zone fluids) to be studied along both depth (perpendicular to the deformation front) and latitudinal gradients.
Version 1.00 of the Asynchronous Communications Support supplied with the IBM Personal Computer must be modified to be used for communications with Multics. Version 2.00 can be used as supplied, but error checking and screen printing capabilities can be added by using modifications very similar to those required for Version 1.00. This paper describes and lists required programs on Multics and appropriate modifications to both Versions 1.00 and 2.00 of the programs supplied by IBM.
Data collected with the GeoXT Trimble GPS unit using ArcPad 6.1. (summer 2006-2007). Files were created within a geodatabase to create a data dictionary for use in ArcPad during data collection. Drop down lists for habitat type, substrate, depth, width, length, and descriptions were included. Data files produced on the GeoXT were point shapefiles that could be checked back into the geodatabase and viewable as a layer. Points were gathered while canoeing along the South Fork Shenandoah River. Each location marked a change in meso-scale habitat type. GPS points were supplemented with GIS-derived points in areas where manual measurements were made. The points were used to generate a line coverage. This coverage represents physical habitat at a meso-scale (width of stream).
Background Among the most widely anticipated climate-related impacts to biodiversity are geographic range shifts, whereby species shift their spatial distribution in response to changing climate conditions. In particular, a series of commonly articulated hypotheses have emerged: species are expected to shift their distributions to higher latitudes, greater elevations, and deeper depths in response to climate change, reflecting an underlying hypothesis that species will move to cooler locations to track spatial changes in the temperature of their current range. Yet, many species are not demonstrating range shifts consistent with these hypotheses. Resolving this discrepancy and providing effective explanations for the observed variability in species’ range shifts is urgently needed to help support a range of natural resource management decisions. Here, we propose a protocol to review the body of evidence for commonly-held climate change range shift hypotheses at the species level focusing on observed latitudinal, longitudinal, elevational, and depth shifts in response to temperature and precipitation changes. We aim to answer the question: what is the impact of anthropogenic climate change (specifically changes in temperature and precipitation) on species ranges? Methods In this review protocol, we propose to conduct a systematic search of literature from internet databases and search engines in English. Articles will be screened in a two-stage process (title/abstract and full text) to evaluate whether they meet a list of eligibility criteria (e.g., presents species-level data, compares >1 time period). Initial data coding and extraction will be completed by four reviewers and checked by a secondary reviewer from among our co-authors. We will perform a formal meta-analysis to document estimated effect size using the subset of available range-shift data expressed in distance per time (e.g., km/decade). We will also use multinomial logistic regression models to assess the probability that species are shifting in a direction that supports our hypotheses (i.e. towards higher latitudes, greater elevations, and deeper depths). We will account for study methodology as a potential source of variation.
This annotated bibliography was prepared by Warren I. Finch from a rough copy compiled by the late James C. Wright in either late 1967 or early 1968 as an aid to his understanding of the stratigraphic distribution of uranium deposits in Triassic rocks of the Southern high Plains. He did not finish it, inasmuch as several references listed are not annotated. Nevertheless, it is fairly complete for North American literature for years prior to 1967, but it does not contain any papers published in Europe, several of which are pertinent. A few papers oil localities in Wyoming, the Colorado Plateau region, and Mexico are annotated for the purposes of generic and stratigraphic comparison. Wright collated many of the data; cross references are abundant. The bibliography is presented as prepared by Wright; editing was held to a minimum. No additional check was made of the source materials for accuracy of the data--for example, spellings of fossil names. The stratigraphic nomenclature is that: used in the reports cited and may or may not conform to that currently accepted by the U.S. Geological Survey. A list of non-annotated references cited in the annotations was added.
The magnitude 5.2 (mb) northern Kentucky earthquake of July 27, 1980, at 18:52:21.8 UTC, located at 38.17N, 83.91W with a depth of 8 km (as determined by the National Earthquake Information Service), was particularly notable for the widespread damage it did, especially to older chimneys. Investigators from several different organizations were in the field shortly after the earthquake recording aftershocks and checking intensities. The data from postal intensity surveys and field personnel are still coming in, and it will be some time before it is all evaluated and analyzed. This preliminary list of the results of our own field investigations is being produced now in order that the information we gathered may be combined with that of other researchers for analysis. Our investigation, conducted from July 28 to August 3, was designed to delineate the areal distribution of the intensities and to document the amount and type of damage in the epicentral region. Tentative intensities have been assigned to these reports and they have been plotted in figure 1. However, as more information becomes available from other investigators, some of these values may be changed and other locations may be added. Therefore no attempt has been made to contour the data. A maximum Modified Mercalli intensity of VII was assigned to Maysville, Ky., approximately 50 km north of the epicenter, based on the concentrated chimney and other types of building damage there. Elsewhere, similar but scattered chimney damage has been assigned intensity VI.
This bibliography of Klamath Mountains geology was begun, although not in a systematic or comprehensive way, when, in 1953, I was assigned the task of preparing a report on the geology and mineral resources of the drainage basins of the Trinity, Klamath, and Eel Rivers in northwestern California. During the following 40 or more years, I maintained an active interest in the Klamath Mountains region and continued to collect bibliographic references to the various reports and maps of Klamath geology that came to my attention. When I retired in 1989 and became a Geologist Emeritus with the Geological Survey, I had a large amount of bibliographic material in my files. Believing that a comprehensive bibliography of a region is a valuable research tool, I have expended substantial effort to make this bibliography of the Klamath Mountains as complete as is reasonably feasible. My aim was to include all published reports and maps that pertain primarily to the Klamath Mountains, as well as all pertinent doctoral and master's theses. In addition, I included reports in which the Klamath Mountains are of significance but not the primary focus; these latter kinds are mostly reports that correlate the Klamath terranes with those of other provinces, that compare the genesis of Klamath rocks with those elsewhere, or that include the Klamath Mountains in a continental framework. Reports describing the geology of the overlap sequences such as the Great Valley sequence, Hornbrook Formation, and Tertiary sediments and volcanics are included where those rocks lie within the limits of the Klamath Mountains province, but are only selectively included where the overlap sequences are mainly peripheral to the province. The alphabetical part of the bibliography consists of approximately 1700 entries. The list of primary references probably is virtually complete through 1994 and includes some 1995 references. The earliest reference is to James Dwight Dana in 1849. In order to restrict the size of the topical part of the bibliography to reasonable limits, each reference is listed under only one subject although many references may be applicable to two or more subjects. Titles in the topical section are abbreviated to conserve space and still retain identity. The bibliography was compiled from a variety of sources. Some of the references have not been checked against the original publications for accuracy. Caveat emptor! I would appreciate being informed of any errors or ommissions in order that a corrected and updated version of the bibliography may be prepared. I thank Nancy Blair for assistance in verifying some of the references, and thank Mary Donato and Robert Brown for helpful suggestions regarding the topical part of the bibliography. Since the first version of this bibliography was released in 1995, the total number of entries has increased from approximately 1700 to 1937, which indicates a continued high interest in the geology of the Klamath Mountains province. The total number of entries includes 73 Ph.D. theses and 123 Masters theses representing 26 universities.
This paper presents a synthesis of multichannel seismic data on the Western Florida shelf (Fig. 1). This work is part of an ongoing regional program conducted by the U.S. Geological Survey in studying the Exclusive Economic Zones of the United States. The data include 1270 km of 32-fold, common-depth-point (CDP), reflection seismic line obtained with a 3200 m, 64 channel, hydrophone streamer and a 2000 in 3 airgun array. The rationale for the line layout was to tie eight key exploration wells among the 14 existing in federal waters prior to 1980 to 4 key wells in Florida. An attempt was also made to connect our survey with that of the University of Texas Institute of Geophysics in the deep Gulf of Mexico basin. A second set of 1500 km of 24-fold CDP data were collected using a 1200 m, 24-channel streamer and a 550 in 3 airgun source. This set was intended to tie additional wells, drilled between 1979 and 1983, and to infill our original net. Gravity and magnetic measurements were also made along these lines. Our subsurface information in federal waters consists of well logs and files released to us initially by the Conservation Division of the U.S. Geological Survey and subsequently by the U.S. Minerals Management Service. Most information from wells in state waters was provided by the Florida Geological Survey. Table 1 lists wells included in our study and summarizes the types of logs and other information available from each well. Spontaneous potential or gamma ray, resistivity or conductivity, sonic and density logs were generally available. Lithologic information, paleontologic and log picks on stratigraphic units and dip-meter data were also common. Check shot surveys for velocity analysis were available in three wells.
Storm runoff water-quality samples were collected as part of the State of Hawaii Department of Transportation Stormwater Monitoring Program. The program is designed to assess the effects of highway runoff and urban runoff on Halawa Stream and to assess the effects from the H-1 storm drain on Manoa Stream. For this program, rainfall data were collected at three stations, continuous discharge data at four stations, and water-quality data at six stations, which include the four continuous discharge stations. This report summarizes rainfall, discharge, and water-quality data collected between July 1, 2007, and June 30, 2008. A total of 16 environmental samples were collected over two storms during July 1, 2007, to June 30, 2008, within the Halawa Stream drainage area. Samples were analyzed for total suspended solids, total dissolved solids, nutrients, chemical oxygen demand, and selected trace metals (cadmium, chromium, copper, lead, and zinc). Additionally, grab samples were analyzed for oil and grease, total petroleum hydrocarbons, fecal coliform, and biological oxygen demand. Some samples were analyzed for only a partial list of these analytes because an insufficient volume of sample was collected by the automatic samplers. Three additional quality-assurance/quality-control samples were collected concurrently with the storm samples. A total of 16 environmental samples were collected over four storms during July 1, 2007, to June 30, 2008 at the H-1 Storm Drain. All samples at this site were collected using an automatic sampler. Samples generally were analyzed for total suspended solids, nutrients, chemical oxygen demand, oil and grease, total petroleum hydrocarbons, and selected trace metals (cadmium, chromium, copper, lead, nickel, and zinc), although some samples were analyzed for only a partial list of these analytes. During the storm of January 29, 2008, 10 discrete samples were collected. Varying constituent concentrations were detected for the samples collected at different times during this storm event. Two quality-assurance/quality-control samples were collected concurrently with the storm samples. Three additional quality-assurance/quality-control samples were collected during routine sampler maintenance to check the effectiveness of equipment-cleaning procedures.
The proliferation of geographic information systems and digital data bases is creating a need for efficient methods to convert data from one spatial data structure to another. One approach is to create ad hoc interfaces, with a potential of N(N-1) interfaces for N data structures. Using an intermediate data structure, at most 2N interfaces are required. An intermediate relational data structure is therefore proposed that takes the form of a set of normalized relations stored in a relational information management system. The advantages of this approach are found in the simplicity of the relational approach, and the availability of relational operators to be used as higher level tools, to convert from and to the relational data structure. The Relational Information Management System (RIM) is used for the ongoing research. In conjunction with the relational data structure, another higher level tool has been developed to cope with linked lists, tree structures, vectors, and matrices, which are not otherwise easily reduced. This data tracking system is programmable at a higher level, in a syntax that allows a concise expression of the desired restructuring. Output from this system can be further operated on by relational operators to arrive at the desired intermediate data structure. This, and other topology verification and checking tools, are visualized as part of a core system dedicated to the conversion and collation of spatial data from diverse origins.
The U.S. Geological Survey, in cooperation with the Colorado Division of Parks and Recreation, collected and analyzed water-quality data for the Government Highline Canal and Highline Lake from July 2000 through September 2003. Implementation of modernization strategies for the canal, which supplies most of the water to the lake, would decrease the amount of water spilled to Highline Lake from August through October. A reduction in spill water into Highline Lake could adversely affect the recreational uses of the lake. To address this concern and to characterize the water quality in the Government Highline Canal and Highline Lake, the U.S. Geological Survey conducted a study to evaluate limnological conditions prior to implementation of the modernization strategies. This report characterizes the water quality of inflow from the Government Canal and in Highline Lake prior to implementation of modernization strategies in the Government Canal. Flow entering the lake from the Government Canal was characterized using field properties and available chemical, sediment, and bacteria concentrations. Data collected at Highline Lake were used to characterize the seasonal stratification patterns, water-quality chemistry, bacteria populations, and phytoplankton community structure in the lake. Data used for this report were collected at one inflow site to the lake and four sites in Highline Lake. Highline Lake is a mesotrophic/eutrophic lake that has dimictic thermal stratification patterns. Samples collected in the photic zone indicated that there was little physical, chemical, or biological variability at this depth at any of the sampled sites in Highline Lake. Strong thermal and dissolved-oxygen stratification patterns were observed during summer. Dissolved-oxygen concentrations of less than 1 milligram per liter were observed during the summer. Ammonia likely was released from the bottom sediments of Highline Lake. The limiting nutrient in Highline Lake could be nitrogen or phosphorus. In general, the seasonal succession of phytoplankton was similar to that of other lakes in the temperate zone. Several types of algae associated with taste and odor issues were identified in samples, but critical concentrations were not exceeded for any listed algal group with the exception of the diatom genus Cyclotella in one sample. Bacteria concentrations were determined at the public swim beach at Highline Lake. E. coli samples were collected periodically by the USGS and weekly by the Colorado Division of Parks and Recreation. During the study period, no reported E. coli concentration exceeded the standard for natural swimming areas. Inflow water quality was characterized by samples collected at the Camp 7 check structure on the Government Canal. Inflow water temperatures reflected the seasonal patterns of the source water in the Colorado River. The water was well oxygenated. Nitrogen and phosphorus concentrations were low, and concentrations did not differ substantially from year to year or seasonally within a year. All samples had reportable numbers of fecal streptococcus. The maximum reported concentration of E. coli was reported at 77 colonies per 100 milliliters of sample. Suspended-sediment concentrations were relatively low.