Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources

Flood-inundation maps and wetland restoration suitability index for the Blue River and selected tributaries, Kansas City, Missouri, and vicinity, 2012

Digital flood-inundation maps for a 39.7-mile reach of the Blue River and selected tributaries (Brush Creek, Indian Creek, and Dyke Branch) at Kansas City, Missouri, and vicinity, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Kansas City, Missouri. The flood-inundation maps, accessed through the USGS Flood-Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the spatial extent and depth of flooding corresponding to selected water levels (stages) at 15 reference streamgages and associated stream reaches in the Blue River Basin. Near-real-time stage data from the streamgages may be obtained from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at http://water.weather.gov/ahps/, which also forecasts flood hydrographs at selected sites. Flood profiles were computed for each of 15 reaches by means of one-dimensional or two-dimensional hydraulic models. The models were calibrated by using the current stage-streamflow relations at 10 USGS streamgages and documented high-water marks from the flood of June 14, 2010. Hydraulic models were then used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from the National Weather Service Action stage, or near bankfull streamflow, through the stage corresponding to, or exceeding, the estimated 0.2-percent annual exceedance probability flood (500-year recurrence interval flood). The simulated water-surface profiles were then combined with a geographic information system (GIS) terrain model derived from light detection and ranging (lidar) data having a vertical accuracy of less than 0.6 foot and maximum nominal horizontal post spacing of 2.46–3.28 feet to delineate the area flooded at each 1-foot increment of stage. The availability of these flood-inundation maps, along with Internet information regarding current stage from the USGS streamgages and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts. Additional information in this report includes maps of simulated stream velocity for an 8.2-mile, two-dimensional modeled reach of the Blue River and a Wetland Restoration Suitability Index (WRSI) generated for the study area that was based on hydrologic, topographic, and land-use digital feature layers. The calculated WRSI for the selected flood-plain area ranged from 1 (least suitable for possible wetland mitigation efforts) to 10 (most suitable for possible wetland mitigation efforts). A WRSI of 5 to 10 is most closely associated with existing riparian wetlands in the study area. The WRSI allows for the identification of lands along the Blue River and selected tributaries that are most suitable for restoration or creation of wetlands. Alternatively, the index can be used to identify and avoid disturbances to areas with the highest potential to support healthy sustainable riparian wetlands.

Missouri↗

Flood-inundation maps for the Tippecanoe River at Winamac, Indiana

Digital flood-inundation maps for a 6.2 mile reach of the Tippecanoe River at Winamac, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 03331753, Tippecanoe River at Winamac, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/in/nwis/uv?site_no=03331753 . In addition, information has been provided by the USGS to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http://water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many sites that are often collocated with USGS streamgages, including the Tippecanoe River at Winamac, Ind. NWS AHPS forecast peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation and forecasts of flood hydrographs at this site. For this study, flood profiles were computed for the Tippecanoe River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at the Tippecanoe River streamgage, in combination with the current (2014) Federal Emergency Management Agency flood-insurance study for Pulaski County. The calibrated hydraulic model was then used to determine nine water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The 1-percent annual exceedance probability (AEP) flood stage (flood with recurrence intervals within 100 years) has not been determined yet for this streamgage location. The rating has not been developed for the 1-percent AEP because the streamgage dates to only 2001. The simulated water-surface profiles were then used with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar]) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage 03331753, Tippecanoe River at Winamac, Ind., and forecast stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗

Flood-inundation maps for a 9.1-mile reach of the Coast Fork Willamette River near Creswell and Goshen, Lane County, Oregon

Digital flood-inundation maps for a 9.1-mile reach of the Coast Fork Willamette River near Creswell and Goshen, Oregon, were developed by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers (USACE). The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected stages at the USGS streamgage at Coast Fork Willamette River near Goshen, Oregon (14157500), at State Highway 58. Current stage at the streamgage for estimating near-real-time areas of inundation may be obtained at http://waterdata.usgs.gov/or/nwis/uv/?site_no=14157500&PARAmeter_cd=00065,00060 . In addition, the National Weather Service (NWS) forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, areas of inundation were provided by USACE. The inundated areas were developed from flood profiles simulated by a one-dimensional unsteady step‑backwater hydraulic model. The profiles were checked by the USACE using documented high-water marks from a January 2006 flood. The model was compared and quality assured using several other methods. The hydraulic model was then used to determine eight water-surface profiles at various flood stages referenced to the streamgage datum and ranging from 11.8 to 19.8 ft, approximately 2.6 ft above the highest recorded stage at the streamgage (17.17 ft) since 1950. The intervals between stages are variable and based on annual exceedance probability discharges, some of which approximate NWS action stages. The areas of inundation and water depth grids provided to USGS by USACE were used to create interactive flood‑inundation maps. The availability of these maps with current stage from USGS streamgage and forecasted stream stages from the NWS provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures as well as for post flood recovery efforts.

Oregon↗

Flood-inundation maps for the East Fork White River at Shoals, Indiana

Digital flood-inundation maps for a 5.9-mile reach of the East Fork White River at Shoals, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the East Fork White River at Shoals, Ind. (USGS station number 03373500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at http://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site (NWS AHPS site SHLI3). NWS AHPS forecast peak stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. Flood profiles were computed for the East Fork White River reach by means of a one-dimensional, step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the current stage-discharge relation (USGS rating no. 43.0) at USGS streamgage 03373500, East Fork White River at Shoals, Ind. The calibrated hydraulic model was then used to compute 26 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from approximately bankfull (10 ft) to the highest stage of the current stage-discharge rating curve (35 ft). The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM), derived from light detection and ranging (lidar) data, to delineate the area flooded at each water level. The areal extent of the 24-ft flood-inundation map was verified with photographs from a flood event on July 20, 2015. The availability of these maps, along with information on the Internet regarding current stage from the USGS streamgage at East Fork White River at Shoals, Ind., and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗

Flood-inundation maps for Lake Champlain in Vermont and in northern Clinton County, New York

Digital flood-inundation maps for an approximately100-mile length of Lake Champlain in Addison, Chittenden, Franklin, and Grand Isle Counties in Vermont and northern Clinton County in New York were created by the U.S. Geological Survey (USGS) in cooperation with the International Joint Commission (IJC). The flood-inundationmaps, which can be accessed through the International Joint Commission (IJC) Web site at http://www.ijc.org/en_/ , depict estimates of the areal extent flooding correspondingto selected water levels (stages) at the USGS lake gage on the Richelieu River (Lake Champlain) at Rouses Point, N.Y. (station number 04295000). In this study, wind and seiche effects (standing oscillating wave with a long wavelength) were not taken into account and the flood-inundation mapsreflect 11 stages (elevations) for Lake Champlain that are static for the study length of the lake. Near-real-time stages at this lake gage, and others on Lake Champlain, may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ , which also forecasts flood hydrographs at the Richelieu River (Lake Champlain) at Rouses Point. Static flood boundary extents were determined for LakeChamplain in Addison, Chittenden, Franklin, and Grand Isle Counties in Vermont and northern Clinton County in New York using recently acquired (2013–2014) lidar (light detection and ranging) and may be referenced to any of the five USGS lake gages on Lake Champlain. Of these five lakgages, USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y., is the only USGS lake gage that is also a National Weather Service prediction location. Flood boundary extents for the Lake Champlain static flood-inundation map corresponding to the May 201 flood(103.2 feet [ft], National Geodetic Vertical Datum [NGVD] 29) were evaluated by comparing these boundary extents against the inundation area extents determined for the May 2011 flood (which incorporated documented high-water marksfrom the flood of May 201) (Bjerklie and others, 2014). A digital elevation model (DEM) was created by USGS, within a geographic information system (GIS), from the recently flown and processed light detection and ranging(lidar) data (2013–2014) in Vermont and the lake shore area of northern Clinton County in New York. The lidar data have a vertical accuracy of 0.3 to 0.6-ft (9.6 to 18.0-centimeters [cm]) and a horizontal resolution of 2.3 to 4.6 ft (0.7 to 1.4 meters). This DEM was used in determining the floodboundary for 11 flood stages at 0.5-ft intervals from 100.0 to104.0 ft (NGVD 29) and 1-ft intervals from 104.0 to 106.0 ft (NGVD 29) as referenced to the USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y. In addition, the May 2011 flood-inundation area for elevation103.20 ft (NGVD 29) (102.77 ft, North American Vertical Datum [NAVD] 88) was determined from this DEM. The May 2011 flood is the highest recorded lake water level (stage)at the Rouses Point, N.Y., lake gage. Flood stages greater than 101.5 ft (NGVD 29) exceed the “major flood stage”as defined by the NationalWeather Service for USGS lake gage 04295000. The availability of these maps, along with Internet information regarding current stage from the USGS lake gage and forecasted high-flow stages from the NationalWeather Service, will provide emergency management personnel and residents with information that is critical for flood responseactivities such as evacuations and road closures, as well as for post-flood recovery eforts.

New York, Vermont↗

Flood-inundation maps for the Meramec River at Valley Park and at Fenton, Missouri, 2017

Two sets of digital flood-inundation map libraries that spanned a combined 16.7-mile reach of the Meramec River that extends upstream from Valley Park, Missouri, to downstream from Fenton, Mo., were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers, St. Louis Metropolitan Sewer District, Missouri Department of Transportation, Missouri American Water, and Federal Emergency Management Agency Region 7. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the cooperative USGS streamgages on the Meramec River at Valley Park, Mo., (USGS station number 07019130) and the Meramec River at Fenton, Mo. (USGS station number 07019210). Near-real-time stage data at these streamgages may be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/nwis or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ , which also forecasts flood hydrographs at these sites (listed as NWS sites vllm7 and fnnm7, respectively). Flood profiles were computed for the stream reaches by means of a calibrated one-dimensional step-backwater hydraulic model. The model was calibrated using a stage-discharge relation at the Meramec River near Eureka streamgage (USGS station number 07019000) and documented high-water marks from the flood of December 2015 through January 2016. The calibrated hydraulic model was used to compute two sets of water-surface profiles: one set for the streamgage at Valley Park, Mo. (USGS station number 07019130), and one set for the USGS streamgage on the Meramec River at Fenton, Mo. (USGS station number 07019210). The water-surface profiles were produced for stages at 1-foot (ft) intervals referenced to the datum from each streamgage and ranging from the NWS action stage, or near bankfull discharge, to the stage corresponding to the estimated 0.2-percent annual exceedance probability (500-year recurrence interval) flood, as determined at the Eureka streamgage (USGS station number 07019000). The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.28-ft vertical accuracy and 3.28-ft horizontal resolution) to delineate the area flooded at each flood stage (water level). The availability of these maps, along with internet information regarding current stage from the USGS streamgages and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures and for postflood recovery efforts.

Missouri↗

Flood-inundation maps for the Pawtuxet River in West Warwick, Warwick, and Cranston, Rhode Island

A series of 15 digital flood-inundation maps was developed for a 10.2-mile reach of the Pawtuxet River in the municipalities of West Warwick, Warwick, and Cranston, Rhode Island, by the U.S. Geological Survey (USGS), in cooperation with the Rhode Island Emergency Management Agency and the U.S. Army Corps of Engineers. The coverage of the maps extends downstream from Natick Pond dam near State Route 33/Providence Street bridge in West Warwick to the mouth of the river at Pawtuxet Cove (Broad Street bridge) on the border between Cranston and Warwick, R.I. A one-dimensional step-backwater hydraulic model created and calibrated for the Federal Emergency Management Agency Flood Insurance Studies for Kent and Providence Counties in 2015 was updated for this study. The updated hydraulic model reflects the removal of the Pawtuxet Falls dam during 2011 and the raised elevation of a levee surrounding the Warwick Sewer Authority wastewater treatment facility during 2014–17. The hydraulic model was calibrated by using the current (2018) stage-discharge relation at the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) and documented high-water marks from the March 31, 2010, flood, which had a peak flow greater than the estimated 0.2-percent annual exceedance probability floodflow. The hydraulic model was used to compute water-surface profiles for 15 flood stages at 1-foot (ft) intervals referenced to the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) and ranging from 8.0 ft (15.2 ft, North American Vertical Datum of 1988), which is the National Weather Service Advanced Hydrologic Prediction Service flood category “action stage,” to 22.0 ft (29.2 ft, North American Vertical Datum of 1988), which is the maximum stage of the stage-discharge relation at the streamgage and exceeds the National Weather Service Advanced Hydrologic Prediction Service flood category “major flood stage” of 13.0 ft. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data with a 1.0-ft vertical accuracy to create flood-inundation maps. The flood-inundation maps depict estimates of the areal extent and depth of flooding corresponding to 15 selected flood stages at the streamgage. The flood-inundation maps depict only riverine flooding and do not depict any tidal backwater or coastal storm surge that might occur in the lower part of the river reach. The flood-inundation maps can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation . Near-real-time stages and discharges at the Pawtuxet River streamgage can be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ . The National Weather Service Advanced Hydrologic Prediction Service provides flood forecasts of stage for this site (CRAR1) at https:/water.weather.gov/ahps/ . The availability of flood-inundation maps referenced to current and forecasted water levels at the USGS Pawtuxet River at Cranston, Rhode Island, streamgage (01116500) can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during flood events.

Rhode Island↗

Hydraulic modeling and flood-inundation mapping for the Huron River and Ore Lake Tributary, Livingston County, Michigan

Digital flood-inundation maps for an 8-mile (mi) reach of the Huron River near Hamburg, Michigan (station number 04172000), from downstream of Rickett Road to Strawberry Lake, were created by the U.S. Geological Survey (USGS), in cooperation with Green Oak and Hamburg Townships, Michigan, and the U.S. Army Corps of Engineers. The flood-inundation maps also include a 1.16-mi reach of the Ore Lake Tributary until it joins the Huron River, approximately 2.22 mi downstream of Rickett Road. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Huron River near Hamburg, Michigan (station number 04172000). Near real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ . The NWS Advanced Hydrologic Prediction Service also provides forecasted flood hydrographs at this website. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the current stage-discharge relation at the Huron River near Hamburg, Mich., streamgage and was calibrated to water levels determined with stage sensors (pressure transducers) temporarily deployed along the stream reach. The hydraulic model was used to compute a set of water-surface profiles for flood stages ranging from 7.0 to 10.5 feet (ft). This range represents stages just above 6.0 (bankfull) to 2.04 ft above the maximum recorded stage at the USGS streamgage on the Huron River near Hamburg, Mich. (station number 04172000). The computed water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar] data having a 0.49-ft vertical accuracy and 3.8-ft horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information critical for flood-response activities such as evacuations, road closures, and postflood recovery efforts.

Michigan↗

Flood-inundation maps for the lower Pawcatuck River in Westerly, Rhode Island, and Stonington and North Stonington, Connecticut

A series of 11 digital flood-inundation maps was developed for a 5.5-mile reach of the lower Pawcatuck River in Westerly, Rhode Island, and Stonington and North Stonington, Connecticut, by the U.S. Geological Survey (USGS) in cooperation with the Town of Westerly, Rhode Island, and the Rhode Island Office of Housing and Community Development. The coverage of the maps extends from downstream from the Ashaway River inflow at the State Border between Hopkinton and Westerly, Rhode Island, and North Stonington, Connecticut, to about 500 feet (ft) downstream from the U.S. Route 1/Broad Street bridge on the State border between Westerly, Rhode Island, and Stonington, Connecticut. A one-dimensional step-backwater hydraulic model created and calibrated for an ongoing (2018) Federal Emergency Management Agency Flood-Insurance Study for New London County, Connecticut and Washington County, Rhode Island was updated for this study. The hydraulic model reflects the removal of the White Rock dam during 2015–16, and was calibrated using the stage-discharge relation at the USGS Pawcatuck River at Westerly, Rhode Island, streamgage (01118500) and documented high-water marks from the March 30, 2010, flood, which had a peak flow slightly greater than the estimated 0.2-percent annual exceedance probability floodflow. The hydraulic model was used to compute water-surface profiles for 11 flood stages at 1-ft intervals referenced to the USGS Pawcatuck River at Westerly, Rhode Island, streamgage (01118500) and ranging from 6.0 ft (3.32 ft, North American Vertical Datum of 1988), which is the National Weather Service Advanced Hydrologic Prediction Service flood category “action stage,” to 16.0 ft (13.32 ft, North American Vertical Datum of 1988), which is the maximum stage of the stage-discharge relation at the streamgage and exceeds the National Weather Service Advanced Hydrologic Prediction Service flood category “major flood stage” of 11.0 ft. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data with a 1.0-ft vertical accuracy to create flood-inundation maps. The flood-inundation maps depict estimates of the areal extent and depth of flooding corresponding to 11 selected flood stages at the streamgage. The flood-inundation maps depict only riverine flooding and do not depict any tidal backwater or coastal storm surge that could occur in the lower part of the river reach. The flood-inundation maps can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation . Near-real-time stages and discharges at the Pawcatuck River streamgage can be obtained from the USGS National Water Information System at https://waterdata.usgs.gov/ . The National Weather Service Advanced Hydrologic Prediction Service provides flood forecast of stage for this site (WSTR1) at https://water.weather.gov/ahps/ . The availability of flood-inundation maps referenced to current and forecasted water levels at the USGS Pawcatuck River at Westerly, Rhode Island streamgage (01118500) can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during flood events.

Connecticut, Rhode Island↗

Flood-inundation maps for the North Fork Kentucky River at Hazard, Kentucky

Digital flood-inundation maps for a 7.1-mile reach of the North Fork Kentucky River at Hazard, Kentucky (Ky.), were created by the U.S. Geological Survey (USGS) in cooperation with the Kentucky Silver Jackets and the U.S. Army Corps of Engineers Louisville District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the North Fork Kentucky River at Hazard, Ky. (USGS station number 03277500). Near-real-time stages at this streamgage may be obtained on the internet from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at https://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site (NWS AHPS site HAZK2). NWS AHPS forecast peak stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. Flood profiles were computed for the North Fork Kentucky River reach by means of a one-dimensional, step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the current stage-discharge relation (USGS rating no. 24.0) at USGS streamgage 03277500, North Fork Kentucky River at Hazard, Ky. The calibrated hydraulic model was then used to compute 26 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from approximately bankfull (14 ft) to the highest even-foot increment stage (39 ft) of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system digital elevation model, derived from light detection and ranging data, to delineate the area flooded at each water level. The availability of these maps, along with information on the internet regarding current stage from the USGS streamgage at North Fork Kentucky River at Hazard, Ky., and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Kentucky↗

Flood-inundation maps of the Meramec River from Eureka to Arnold, Missouri, 2018

Libraries of digital flood-inundation maps that spanned a combined 37.2-mile reach of the Meramec River that extended upstream from Eureka, Missouri, to downstream near the confluence of the Meramec and Mississippi Rivers were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers, Metropolitan St. Louis Sewer District, Missouri Department of Transportation, Missouri American Water, Federal Emergency Management Agency Region 7, and the cities of Pacific, Eureka, Wildwood, and Arnold. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the cooperative USGS streamgages for the Meramec River near Eureka, Mo. (USGS station 07019000), the Meramec River at Valley Park, Mo. (USGS station 07019130), the Meramec River at Fenton, Mo. (USGS station 07019210), and the Meramec River at Arnold, Mo. (USGS station 07019300). Near-real-time stage data at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ , which also forecasts flood hydrographs at these sites (listed as NWS sites erkm7, vllm7, fnnm7, and arnm7, respectively). Flood profiles were computed for the stream reach by means of a calibrated one-dimensional step-backwater hydraulic model. The model was calibrated using a stage-discharge relation at the Meramec River near Eureka, Mo., streamgage (USGS station 07019000) and documented high-water marks from the flood of December 2015 through January 2016. The calibrated hydraulic model was used to compute water-surface profiles: 1 set for the Meramec River near Eureka, Mo., streamgage (USGS station 07019000); 1 set for the Meramec River at Valley Park, Mo., streamgage (USGS station 07019130); 7 sets for the Meramec River at Fenton, Mo., streamgage (USGS station 07019210) for a range of Mississippi River conditions; and 8 sets for the Meramec River at Arnold, Mo., streamgage (USGS station 07019300) for a range of Mississippi River conditions. The water-surface profiles were produced for stages at 1-foot (ft) intervals referenced to the datum from each streamgage and ranging from the NWS action stage, or near bankfull discharge, to the stage corresponding to the estimated 0.2-percent annual exceedance probability (500-year recurrence interval) flood, as determined at the Meramec River near Eureka, Mo., streamgage (USGS station 07019000). The simulated water-surface profiles then were combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.28-ft vertical accuracy and 3.28-ft horizontal resolution) to delineate the area flooded at each simulated 1-ft stage increment. Previously published flood-inundation maps were updated and incorporated in the flood map libraries for USGS stations 07019130 and 07019210 to complete the map sets corresponding to eight Mississippi River conditions. The availability of these maps, along with internet information regarding current stage from the USGS streamgages and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures and for postflood recovery efforts.

Missouri↗

Flood-inundation maps for Dardenne Creek in St. Charles County, Missouri, 2019

Digital flood-inundation maps for a 9.9-mile reach of Dardenne Creek, St. Charles County, Missouri, were created by the U.S. Geological Survey (USGS), in cooperation with the Missouri Department of Transportation, St. Charles County, and the Cities of O’Fallon and St. Peters, Mo. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/​mission-​areas/​water-​resources/​science/​flood-​inundation-​mapping-​fim-​program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages 05514860 Dardenne Creek at Old Town St. Peters, Mo., and 05587450 Mississippi River at Grafton, Illinois. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/​10.5066/​F7P55KJN or the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ ahps2/ hydrograph.php? wfo= lsx&gage= drcm7 and https://water.weather.gov/ ahps2/ hydrograph.php? wfo= lsx&gage= grfi2 , which also forecasts flood hydrographs at these sites (sites DRCM7 and GRFI2). Flood profiles were computed for the Dardenne Creek stream reach by means of a one-dimensional model for simulating water-surface profiles with steady-state flow computations. The model was calibrated by using the current stage-streamflow relation at the USGS streamgages 05514840 Dardenne Creek at O’Fallon, Mo., and 05514860 Dardenne Creek at Old Town St. Peters, Mo., and the documented high-water marks from the flood of December 2015. The hydraulic model was then used to compute 17 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 16 ft, or near bankfull, to 32 ft at the reference streamgage 05514860. Stages in the lower Dardenne Creek can be affected by backwater from the Mississippi River; therefore, several sets of water-surface profiles were developed representing the extent of varying levels of backwater as referenced to the USGS streamgage 05587450 on the Mississippi River at Grafton, Ill. The upper stage for each map library exceeds the stage corresponding to the estimated 0.2-percent annual exceedance probability flood (500-year recurrence interval flood) at the streamgage location. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.26-ft vertical accuracy and 0.71-ft horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with real-time information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel and residents with information that is critical for flood mitigation, preparedness and planning, flood-response activities such as evacuations and road closures, and postflood recovery efforts.

Missouri↗

Flood-inundation maps of the Blue River and major tributaries in and near Kansas City, Missouri, 2023–25

Digital flood-inundation maps for 35.5 miles of the Blue River, in and near Kansas City, Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Kansas City. Maps were also developed for a combined 7.3 miles of Brush Creek (4.4 miles) and Indian Creek (2.9 miles), two primary tributaries to the Blue River in the study reach. The flood-inundation maps, available through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding, depth of water above first-floor elevations in selected buildings, water velocity, water-surface elevations, and time of travel corresponding to selected water levels or gage heights (hereafter referred to as “stages”) at nine reference USGS streamgages—five on the Blue River (USGS station numbers 06893590, 06893578, 06893500, 06893150, and 06893100), two on Brush Creek (USGS station numbers 06893562 and 06893557), one on Indian Creek (USGS station number 06893390), and one on the Missouri River (USGS station number 06893000). Near-real-time stages at these streamgages may be obtained from USGS Water Data for the Nation at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at seven of these sites (USGS station numbers 06893000, 06893590, 06893578, 06893500, 06893150, 06893557, and 06893390). Flood profiles were computed for eight map reaches by means of two-dimensional hydraulic models. The models were calibrated using the USGS-developed stage–streamflow relations at each reference streamgage. Two map reaches on the lower Blue River also include the effects of backwater from the Missouri River on flood inundation extent and hydraulic characteristics. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “Action Stage” or near bankfull to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root-mean-square error) to delineate the area flooded at each water level and the associated hydraulic characteristics. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that could be critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Kansas, Missouri↗

Water resources data, Florida, water year 1988. Volume 3A: Southwest Florida - surface water

Water resources data for the 1988 water year in Florida consist of continuous or daily discharge for 338 streams, periodic discharge for 34 streams, miscellaneous discharge for 28 streams, continuous or daily stage for 152 streams, periodic stage for 29 streams, peak discharge for 71 streams and peak stage for 84 streams; continuous daily tide stage for 10 sites, continuous or daily elevations for 73 lakes, periodic elevations for 72 lakes; continuous ground-water levels for 490 wells, periodic ground-water levels for 1620 wells, and miscellaneous water-level measurements for 2678 wells; quality-of-water data for 158 surface-water sites and 884 wells. The data for southwest Florida include records of stage, discharge and water quality of streams; stage, contents, water quality of lakes and reservoirs, and water levels and water quality of ground-water wells. Volume 3A contains continuous or daily discharge for 59 streams, periodic discharge for 5 streams, miscellaneous discharge for 4 streams, continuous daily stage for 25 streams, periodic stage for 2 streams, peak discharge for 15 streams, continuous daily tide stage for 10 sites, continuous elevation for 22 lakes and periodic elevation for 16 lakes, and quality-of-water for 64 surface-water sites. These data represent the National Water Data System records collected by the U. S. Geological Survey and cooperating local, state and federal agencies in Florida.

Florida↗

Water resources data, Florida, water year 1989. Volume 3A: Southwest Florida surface water

Water resources data for the 1989 water year in Florida consist of continuous or daily discharge for 295 streams, periodic discharge for 36 streams, miscellaneous discharge for 75 streams, continuous or daily stage for 154 streams, continuous daily tide stage for 12 sites, periodic stage for 13 streams, peak discharge for 57 streams and peak stage for 30 streams; continuous or daily elevations for 73 lakes, periodic elevations for 72 lakes; continuous ground-water levels for 514 wells, periodic ground-water levels for 798 wells, and miscellaneous water-level measurements for 2687 wells; quality-of-water data for 149 surface-water sites and 827 wells. The data for southwest Florida include records of stage, discharge and water quality of streams; stage, contents, water quality of lakes and reservoirs, and water levels and water quality of ground-water wells. Volume 3A contains continuous or daily discharge for 59 streams, periodic discharge for 4 streams, miscellaneous discharge for 3 streams, continuous daily stage for 24 streams, continuous daily tide stage for 10 sites, periodic stage for 1 stream, peak discharge for 30 streams, continuous elevation for 21 lakes and periodic elevation for 16 lakes, and quality-of-water for 71 surface-water sites. These data represent the National Water Data System records collected by the U. S. Geological Survey and cooperating local, state and federal agencies in Florida.

Florida↗

Water Resources Data, New Jersey, Water Year 2003; Volume 1. Surface-Water Data

Water-resources data for the 2003 Water Year for New Jersey are presented in three volumes, and consists of records of stage, discharge, and water quality of streams; stage and contents of lakes and reservoirs; and water levels and water quality of ground water. Volume 1 contains discharge records for 100 gaging stations; tide summaries at 29 tidal gaging stations; and stage and contents at 39 lakes and reservoirs. Also included are stage and discharge for 106 crest-stage partial-record stations, stage-only at 33 tidal crest-stage gages, and discharge for 142 low-flow partial- record stations. Locations of these sites are shown in figures 8-11. Additional discharge measurements were made at 143 miscellaneous sites that are not part of the systematic data-collection program. Discontinued station tables for gaging stations, crest-stage gages, tidal crest-stage and tidal gaging stations show historical coverage. The data in this report represent that part of the National Water Information System (NWIS) data collected by the United States Geological Survey (USGS). Hydrologic conditions are also described for this water year, including streamflow, precipitation, reservoir conditions, and air temperatures.

Water Data Report↗

Water resources data, New Jersey, water year 2004-volume 1. surface-water data

Water-resources data for the 2004 water year for New Jersey are presented in three volumes, and consists of records of stage, discharge, and water-quality of streams; stage and contents of lakes and reservoirs; and water levels and water-quality of ground water. Volume 1 contains discharge records for 105 gaging stations; tide summaries at 27 tidal gaging stations; stage and contents at 39 lakes and reservoirs; and diversions from 51 surface-water sources. Also included are stage and discharge for 108 crest-stage partial-record stations, stage-only at 34 tidal crest-stage gages, and discharge for 124 low-flow partial-record stations. Locations of these sites are shown in figures 8-11. Additional discharge measurements were made at 131 miscellaneous sites that are not part of the systematic data-collection program. Discontinued station tables for gaging stations, crest-stage gages, tidal crest-stage and tidal gaging stations show historical coverage. The data in this report represent that part of the National Water Information System (NWIS) data collected by the United States Geological Survey (USGS). Hydrologic conditions are also described for this water year, including stream-flow, precipitation, reservoir conditions, and air temperatures.

Water Data Report↗

Water resources data, New Jersey, water year 2005. Volume 1 - surface-water data

Water-resources data for the 2005 water year for New Jersey are presented in three volumes, and consists of records of stage, discharge, and water-quality of streams; stage and contents of lakes and reservoirs; and water levels and water-quality of ground water. Volume 1 contains discharge records for 103 gaging stations; tide summaries at 28 tidal gaging stations; stage and contents at 34 lakes and reservoirs; and diversions from 50 surface-water sources. Also included are stage and discharge for 116 crest-stage partial-record stations, stage-only at 33 tidal crest-stage gages, and discharge for 155 low-flow partial-record stations. Locations of these sites are shown in figures 8-11. Additional discharge measurements were made at 222 miscellaneous sites that are not part of the systematic data-collection program. Discontinued station tables for gaging stations, crest-stage gages, tidal crest-stage and tidal gaging stations show historical coverage. The data in this report represent that part of the National Water Information System (NWIS) data collected by the United States Geological Survey (USGS). Hydrologic conditions are also described for this water year, including stream-flow, precipitation, reservoir conditions, and air temperatures.

Water Data Report↗