Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “American Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29Linked to original sources
USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗
USGS2010

Documentation for initial seismic hazard maps for Haiti

In response to the urgent need for earthquake-hazard information after the tragic disaster caused by the moment magnitude (M) 7.0 January 12, 2010, earthquake, we have constructed initial probabilistic seismic hazard maps for Haiti. These maps are based on the current information we have on fault slip rates and historical and instrumental seismicity. These initial maps will be revised and improved as more data become available. In the short term, more extensive logic trees will be developed to better capture the uncertainty in key parameters. In the longer term, we will incorporate new information on fault parameters and previous large earthquakes obtained from geologic fieldwork. These seismic hazard maps are important for the management of the current crisis and the development of building codes and standards for the rebuilding effort. The boundary between the Caribbean and North American Plates in the Hispaniola region is a complex zone of deformation. The highly oblique ~20 mm/yr convergence between the two plates (DeMets and others, 2000) is partitioned between subduction zones off of the northern and southeastern coasts of Hispaniola and strike-slip faults that transect the northern and southern portions of the island. There are also thrust faults within the island that reflect the compressional component of motion caused by the geometry of the plate boundary. We follow the general methodology developed for the 1996 U.S. national seismic hazard maps and also as implemented in the 2002 and 2008 updates. This procedure consists of adding the seismic hazard calculated from crustal faults, subduction zones, and spatially smoothed seismicity for shallow earthquakes and Wadati-Benioff-zone earthquakes. Each one of these source classes will be described below. The lack of information on faults in Haiti requires many assumptions to be made. These assumptions will need to be revisited and reevaluated as more fieldwork and research are accomplished. We made two sets of maps using different assumptions about site conditions. One set of maps is for a firm-rock site condition (30-m averaged shear-wave velocity, Vs30, of 760 m/s). We also developed hazard maps that contain site amplification based on a grid of Vs30 values estimated from topographic slope. These maps take into account amplification from soils. We stress that these new maps are designed to quantify the hazard for Haiti; they do not consider all the sources of earthquake hazard that affect the Dominican Republic and therefore should not be considered as complete hazard maps for eastern Hispaniola. For example, we have not included hazard from earthquakes in the Mona Passage nor from large earthquakes on the subduction zone interface north of Puerto Rico. Furthermore, they do not capture all the earthquake hazards for eastern Cuba.

Open-File Report↗
USGS2015

California State Waters Map Series — Offshore of Tomales Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 200 m) subsurface geology. Tomales Bay, approximately 20-km long and 1- to 2-km wide, formed along a submerged portion of the San Andreas Fault, which forms a right-lateral transform boundary between the North American and Pacific tectonic plates. The fault juxtaposes Cretaceous granitic rock to the southwest (exposed on Tomales Point) with the Jurassic and Cretaceous Franciscan Complex to the northeast (exposed on the northeast coast of the Tomales Bay), and has an estimated slip rate of about 17 to 30 mm/yr in this area. The destructive great 1906 California earthquake (M7.8, 4/18/1906) is thought to have nucleated on the San Andreas Fault about 60 km to the south, offshore of San Francisco, with the rupture extending northward through Tomales Bay and for an additional about 230 km to the south flank of Cape Mendocino. The northwest coast of Tomales Point is characterized by steep, high (as much as 100 m), barren, granitic cliffs and a rugged shoreline with a few small pocket beaches. There has been as much as 48 m of Tomales Point cliff retreat from 1929–30 to 2002. The granite is overlain by less resistant Tertiary sandstones at Kehoe Beach, the northern end of a continuous, wide, sandy beach backed by a large coastal dune field that extends for about 20 km south to Point Reyes Head. This long beach has a mixed history of accretion and retreat since the late 1800s. Tomales Point relief is asymmetrical so that most small coastal watersheds in the map area drain eastward from Inverness Ridge into Tomales Bay. Many of these steep drainages have small sandy beaches at their mouths. The east coast of Tomales Bay is characterized by more gentle, hummocky, hilly relief underlain by the landslide-prone Franciscan Complex. Keys Creek, the most prominent small watershed entering Tomales Bay from the east, has a small subaqueous delta at its mouth. Central Tomales Bay is relatively flat and underlain by fine sand and silt. The mouth of Tomales Bay is characterized by sand waves, dunes, and flats that have formed in response to strong tidal flow. Sand Point and Dillon Beach are located at the mouth of Tomales Bay and on the southeasternmost shores of Bodega Bay, respectively. The wide beach in this area is backed by an extensive (4.8 km 2 ) sand-dune complex. The enormous volume of sand on the beach and in the dune field is derived from southward littoral drift. This sediment is trapped by Tomales Bay and Tomales Point, which function as the south end of the Bodega Bay littoral cell. The continental shelf in California’s State Waters in the Offshore of Tomales Point map area extends to water depths of about 70 m (mean slope of about 0.7°) and is characterized by extensive, rugged, rocky seafloor. Granitic seafloor has a massive and fractured texture, whereas seafloor sedimentary rock outcrops commonly form distinctive “ribs” created by differential seafloor erosion of dipping beds of variable resistance. Direct sediment supply to this shelf is minimal because littoral drift is blocked to the north by Tomales Bay and Tomales Point, and to the south by the Point Reyes headland. Circulation over the continental shelf in the map area (and in the broader northern California region) is dominated by the southward-flowing California Current, the eastern limb of the North Pacific Gyre. Associated upwelling brings cool, nutrient-rich waters to the surface, resulting in high biological productivity. The current flow generally is southeastward during the spring and summer; however, during the fall and winter, the otherwise persistent northwest winds are sometimes weak or absent, causing the California Current to move farther offshore and the Davidson Current, a weaker, northward-flowing countercurrent, to become active. As a result, net flow over the continental shelf can be more southerly during the spring and summer and more northerly during the fall and winter. Throughout the year, this part of the central California coast is exposed to four wave climate regimes—the north Pacific swell, the southern swell, northwest wind waves, and local wind waves. The north Pacific swell dominates in winter months (typically November through March), with wave heights at offshore buoys ranging from 2 to 10 m and wave periods ranging from 10 to 25 s. During summer months, the largest waves come from the southern swell, generated by storms in the south Pacific and offshore Central America. Characteristically, these swells have smaller wave heights (0.3 to 3 m) and similarly long periods (range 10 to 25 s). Northwest wind waves affect the coast throughout the year, while local wind waves are most common from October to April. These two wind-wave regimes typically have wave heights of 1 to 4 m and short periods (3 to 10 s). Potential marine benthic habitats in the Offshore of Tomales Point map area range from unconsolidated continental-shelf sediment, to rocky continental-shelf substrate, to unconsolidated estuary sediments. Rocky-shelf outcrops and rubble are considered to be promising potential habitats for rockfish and lingcod, both of which are recreationally and commercially important species. Dynamic bedforms, such as the sand waves at the mouth of Tomales Bay, are considered potential foraging habitat for juvenile lingcod and possibly migratory fishes, as well as for forage fish such as Pacific sand lance.

California↗
USGS1995

Geometeorological data collected by the USGS Desert Winds Project at Gold Spring, Great Basin desert, northeastern Arizona, 1979-1992

The primary purpose of the Desert Winds Project (DWP) is to obtain high-resolution meteorological data and related surface geological and vegetation data for natural (e.g., uncultivated) desert sites where wind is or has been a major erosive or depositional force. The objectives are twofold: (1) to provide the detailed field measurements needed to carry out quantitative studies of wind as an agent of surface geologic change; and (2) to establish a baseline for defining the 'normal' range of climatic conditions that can be expected to occur on a decadal time scale, in areas considered representative of the major American deserts. The Gold Spring locality was selected to represent that part of the Great Basin Desert that extends into northeastern Arizona. The long-term goal for acquiring and analyzing the Desert Winds Project data is to use them to address problems of land resource degradation by wind, whether resulting from climatic variation aridification) or human activities (desertification), or both (see techinfo.doc).

Arizona↗
USGS1948

Geology of the Southern Guadalupe Mountains, Texas

This report deals with an area of 425 square miles in the western part of Texas, immediately south of the New Mexico line. The area comprises the south end of the Guadalupe Mountains and the adjacent part of the Delaware Mountains; it includes the highest peaks in the State of Texas. The area is a segment of a large mountain mass that extends 50 miles or more northward and southward. The report describes the geology of the area, that is, the nature of its rocks, tectonics, and surface features, and the evidence that they give as to the evolution of the area through geologic time. Incidental reference is made to the geology of surrounding regions in order to place the area in its environment. The Permian system of the southwestern United States has been until recently one of the intriguing but little known subjects of American stratigraphy. In the latter half of the nineteenth century after the western. United States was settled, the "red bed" sections of the Permian were studied and reported on by many geologists, but up to 1920 the existence of a contemporaneous marine sequence in western Texas and southeastern New Mexico was little appreciated. Since that year the discovery of extensive oil fields and potash beds in this region gave an impetus to the study of the Permian rocks, and furnished the geologist with records of hundreds of drill holes from which to deduce the nature of the strata not exposed at the surface. At the same time geologists have studied the rocks in the outcropping areas, and have compared them with the strata encountered by drilling. Much remains to be done in order to understand the history of Permian time in the region. The physical and chemical conditions that caused. the deposition of .the various and often complexly related deposits need to be better understood. More of the fossils of the rich and interesting marine faunas should be described, and the relations of the fossils to their environments should be determined. Further, a satisfactory scheme of correlation is needed, and also a subdivision into series that will express the contemporaneity of strata in different areas. One useful contribution to the solution of these problems is the detailed study of sequences of rocks exposed at the surface in the different mountain ranges of Texas and New Mexico. This report deals with one such sequence of rocks in western Texas, the one exposed in the southern Guadalupe Mountains (fig. 1). Here, the Permian rocks are magnificently exposed, to a thickness of about 4,000 feet (pl. 1). They are all of marine origin, and belong to the middle part of the system, with the base concealed and the top absent. Overlying and underlying beds, however, are found in nearby areas.

Texas↗
USGS1878

Bulletin of the United States Geological and Geographical Survey of the Territories: Volume IV, Number 3

Table of Contents ART. XXV.----Field-notes on Birds observed in Dakota and Montana along the Forty-ninth Parallel during the seasons of 1873 and 1874. By Dr. Elliott Coues, U.S.A., late Surgeon and Naturalist U.S. Northern Boundary Commission.....545-662 ART. XXVI.----Notes on a Collection of Fishes from the Rio Grande, at Brownsville, Texas-Continued. By D.S. Jordan, M.D......663-668 ART. XXVII.---Preliminary Studies on the North American Pyralidae. I. By A.R. Grote..... 669-706 ART. XXVIII.--Paleontological Papers No.6: Descriptions of New Species of Invertebrate Fossils from the Laramie Group. By C.A. White, M.D......707-720 ART. XXIX.----Paleontological Papers No.7: On the Distribution of Molluscan Species in the Laramie Group. By C. A. White, M.D......721-724 ART. XXX.-----On some Dark Shale recently discovered below the Devonian Limestones, at Independence, Iowa\; with a Notice of its Fossils and Description of New Species. By S. Calvin, Professor of Geology, State University of Iowa.....725-730 ART. XXXI.----On the Mineralogy of Nevada. By W.J. Hoffman, M.D......731-745

Report↗
USGS2011

The case for planetary sample return missions

The essential role of planetary sample studies in exploration of the solar system has been well established “Drake et al., 1987”. As part of the larger pursuit of comparative planetology, samples of other rocky planets (Mercury, Venus, Mars), planetary satellites, asteroids, and comets should reveal much about the materials and processes that formed Earth. In that context, Mars is an especially appealing sample target because of its distinctive, Earth‐like characteristics. Here, we review the scientific objectives and justifications for collecting documented samples of Mars and returning them to Earth for laboratory study. A Mars sample‐return mission will be technologically challenging but represents the only way to acquire definitive knowledge about formation of the planet, its geologic and climatic history, and its potential as a haven of life.

Eos, Transactions, American Geophysical Union↗
USGS2003

Phanerozoic strike-slip faulting in the continental interior platform of the United States: examples from the Laramide Orogen, Midcontinent, and Ancestral Rocky Mountains

The continental interior platform of the United States is that part of the North American craton where a thin veneer of Phanerozoic strata covers Precambrian crystalline basement. N- to NE-trending and W- to NW-trending fault zones, formed initially by Proterozoic/Cambrian rifting, break the crust of the platform into rectilinear blocks. These zones were reactivated during the Phanerozoic, most notably in the late Palaeozoic Ancestral Rockies event and the Mesozoic-Cenozoic Laramide orogeny — some remain active today. Dip-slip reactivation can be readily recognized in cross section by offset stratigraphic horizons and monoclinal fault-propagation folds. Strike-slip displacement is hard to document because of poor exposure. Though offset palaeochannels, horizontal slip lineations, and strain at fault bends locally demonstrate strike-slip offset, most reports of strike-slip movements for interior-platform faults are based on occurrence of map-view belts of en echelon faults and anticlines. Each belt overlies a basement-penetrating master fault, which typically splays upwards into a flower structure. In general, both strike-slip and dip-slip components of displacement occur in the same fault zone, so some belts of en echelon structures occur on the flanks of monoclinal folds. Thus, strike-slip displacement represents the lateral component of oblique fault reactivation; dip-slip and strike-slip components are the same order of magnitude (tens of metres to tens of kilometres). Effectively, faults with strike-slip components of displacement act as transfers accommodating jostling of rectilinear crustal blocks. In this context, the sense of slip on an individual strike-slip fault depends on block geometry, not necessarily on the trajectory of regional σ 1 . Strike-slip faulting in the North American interior differs markedly from that of southern and central Eurasia, possibly because of a contrast in lithosphere strength. Weak Eurasia strained significantly during the Alpine-Himalayan collision, forcing crustal blocks to undergo significant lateral escape. The strong North American craton strained relatively little during collisional-convergent orogeny, so crustal blocks underwent relatively small displacements.

Geological Society Special Publication↗
USGS2020

Procedures for developing multi-period response spectra at non-conterminous United States sites

This study complements proposals to the Provisions Update Committee of the Building Seismic Safety Council that would incorporate multi-period response spectra (MPRS) in the 2020 edition of the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (2020 NEHRP Provisions) and related proposals to the ASCE 7-22 Seismic Subcommittee of the American Society of Civil Engineers for incorporation of MPRS in ASCE Standard, ASCE/SEI 7-22, Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-22). Ultimately, the intent is that the proposed MPRS and related design requirements of ASCE 7-22 would be adopted, by reference, as part of the 2024 International Building Code. The technical basis and associated methods herein enable the U.S. Geological Survey (USGS) to develop MPRS for sites in non-conterminous U.S. regions for which seismic hazard analyses have not yet been updated by the USGS to fully define all 22 periods and eight site classes of interest in the MPRS related proposals for the 2020 NEHRP Provisions and ASCE 7-22. These regions include Alaska, Hawaii, Guam and the Northern Mariana Islands, Puerto Rico and the U.S. Virgin Islands, and American Samoa. The methods developed can be used to derive MPRS using only the three currently available ground motion parameters S S , S 1 , and T L for all nonconterminous United States regions of interest. The methods include models that characterize generic shapes of Risk-Targeted Maximum Considered Earthquake (MCE R ) ground motions as a function of these three parameters. For deriving MPRS that represent probabilistic MCE R ground motions, models are based on statistical analyses of large sample sets of probabilistic MCE R response spectra for Western United States (WUS) and Cascadia sites in California, Oregon, Washington (including Puget Sound), Idaho, and Nevada. For deriving MPRS that represent deterministic MCE R ground motions, models are based on sets of deterministic MCE R response spectra calculated using WUS shallow crustal ground motion models for earthquake magnitudes and shaking levels typical of sites governed by deterministic MCE R ground motions.

Alaska, American Samoa, Hawaii, Guam and the North↗
USGS2010

Clockwise rotation and implications for northward drift of the western Transverse Ranges from paleomagnetism of the Piuma Member, Sespe Formation, near Malibu, California

New paleomagnetic results from mid-Tertiary sedimentary beds in the Santa Monica Mountains reinforce the evidence for large-scale rotation of the western Transverse Ranges, and anisotropy measurements indicate that compaction-induced inclination flattening may resolve a long-standing controversy regarding the original paleolatitude of the rotated block. Previously published paleomagnetic data indicate that post-Oligocene rotation amounts to 70°–110° clockwise, affecting the Channel Islands, Santa Monica Mountains, and Santa Ynez Mountains. The Sespe Formation near Malibu consists of a lower member dominated by nonmarine sandstone and conglomerate and an upper section, the Piuma Member, which consists of gray-red sandstone and mudstone interbedded with minor tuff and limestone beds. The Piuma Member has a paleomagnetic pole at 36.6°N, 326.7°E (A 95min = 5.0°, A 95max = 9.6°), obtained by thermal demagnetization of 34 oriented cores from Oligocene and early Miocene beds. After correcting for plunge of the geologic structure, the data are consistent with significant clockwise rotation (77° ± 7°) of the region relative to stable North America. Rotation of the western Transverse Ranges is generally viewed as a consequence of Pacific–North American plate interactions after 28 Ma, when east–west subduction gave way to northwest transform motion in southern California. Inclinations from the Piuma study indicate a paleolatitude anomaly of 11° ± 7° and are consistent with a mean northward drift that exceeds generally accepted San Andreas fault displacement by a factor of 3. However, sedimentary inclination error may accentuate the anomaly. Anisotropy of isothermal remanent magnetization indicates inclination flattening of approximately 8°, and correction for the effect reduces the paleolatitude anomaly to 5.3° ± 5.8°. Compaction may explain the inclination flattening in these sedimentary rocks, but the process does not adequately explain lower-than-expected inclinations found in previous studies of Miocene volcanic rocks of the western Transverse Ranges.

Geochemistry, Geophysics, Geosystems↗
USGS2017

Water quality measurements in San Francisco Bay by the U.S. Geological Survey, 1969–2015

The U.S. Geological Survey (USGS) maintains a place-based research program in San Francisco Bay (USA) that began in 1969 and continues, providing one of the longest records of water-quality measurements in a North American estuary. Constituents include salinity, temperature, light extinction coefficient, and concentrations of chlorophyll- a , dissolved oxygen, suspended particulate matter, nitrate, nitrite, ammonium, silicate, and phosphate. We describe the sampling program, analytical methods, structure of the data record, and how to access all measurements made from 1969 through 2015. We provide a summary of how these data have been used by USGS and other researchers to deepen understanding of how estuaries are structured and function differently from the river and ocean ecosystems they bridge.

California↗
USGS2022

Nanoscale isotopic evidence resolves origins of giant Carlin-type ore deposits

The western North American Great Basin's Carlin-type deposits represent the largest accumulation of gold in the Northern Hemisphere. The controversy over their origins echoes the debate between Neptunists and Plutonists at the birth of modern geology: were the causative processes meteoric or magmatic? Sulfur isotopes have long been considered key to decoding metal cycling in the Earth's crust, but previous studies of Carlin-type pyrite lacked the spatial resolution to quantify differences among the numerous generations of sulfide mineralization. We developed a new dual-method, nanoscale approach to examine the fine-grained ore pyrite. The δ 34 S of the ore pyrite varies systematically with Au concentration at the nanoscale, indicating that both magmatic and meteoric fluids contributed during mineralization, but the magmas brought the gold. Repeated oscillations in fluid ratios upgraded the metal content, resulting in high gold endowment. Our results demonstrate that high-spatial-resolution studies are key to elucidate the spatiotemporal evolution of complex hydrothermal systems.

Nevada↗
USGS1977

Analyses of native water, core material, and elutriate samples collected from the Atchafalaya River and Atchafalaya Bay

During October and November 1976 the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, collected native water and core material from 14 sites along the Atchafalya River in Louisiana (from the head of Whiskey Bay Pilot Channel to American Pass) and 5 sites in Atchafalya Bay for evaluation of possible environmental effects of a proposed channel-enlargement project. Core material from all river sites and one bay site was collected to a depth of 50 feet (15 meters). At the remaining bay sites, samples were collected to a depth of less than 6 inches (15 centimeters) using a pipe dredge. Core material and native water were analyzed (separately and as elutriate samples prepared from mixtures) for selected metals, nutrients, organic compounds, and physical characteristics. No interpretation of the data is given. (Woodard-USGS)

Open-File Report↗
USGS1981

Summary of radiometric anomalies in Alaska

The gamma ray anomalies and their related geological settings shown on this map are a compilation from the NURE reconnaissance surveys (LKB Resources Inc., 1978a, 1978b, 1978c, 1979; Texas Instruments, Inc., 1977, 1978, U.S. Research and Development, 1976; Western Geophysical Company of American, 1980.)

Alaska↗
USGS2020

Total water level data from the January and March 2018 nor’easters for coastal areas of New England

During winter 2017–18 coastal areas of New England were impacted by the January 4, and March 2–4, 2018, nor’easters. The U.S. Geological Survey (USGS), under an interagency agreement with the Federal Emergency Management Agency (FEMA), collected total water level data (the combination of tide, storm surge, wave runup and setup, and freshwater input) using the North American Vertical Datum of 1988 (NAVD 88) from high-water marks and continuous water-level sensors, to better understand the areal extent, timing, and impact of coastal flooding from strong storms. During the January 4, 2018, nor’easter the National Oceanic and Atmospheric Administration (NOAA) Boston, Massachusetts, tide gage recorded the highest total water level on record of 9.66 ft. During the March 2–4, 2018, nor’easter, the Boston tide gage recorded its third highest total water level on record of 9.16 ft. After the January and March 2018 nor’easter storms, the USGS deployed field teams that identified and flagged high-water marks along the coastlines of eastern Massachusetts in January and from Portland, Maine, south to the Connecticut-New York State border in March. In preparation for the approach of the March 2018 nor’easter, the USGS deployed 35 temporary water-level sensors along the coastline of New England to collect total water level data during the storm. Total water level data were also collected at 28 tide gages and 14 coastal streamgages (affected tidally or by tidal backwater during coastal storms) in New England during both nor’easters. Total water level elevations at 71 high-water marks collected after the January 2018 nor’easter in coastal areas of eastern Massachusetts ranged from 5.8 to 15.1 feet (ft), with an average elevation of 9.4 ft and a median elevation of 9.6 ft. Total water level elevations at 10 tide gages and 7 coastal streamgages from Portland to Cape Cod Bay ranged from 4.8 to 11.2 ft, with an average of 9.1 ft and a median of 9.6 ft. Following the March 2018 nor’easter, 111 high-water marks were collected along the New England coastline. Of the 111 high-water marks, 100 were along the eastern coastline of New England from Portland to Cape Cod and had elevations that ranged from 5.3 to 15.1 ft, with an average of 8.9 ft and a median of 8.6 ft. The remaining 11 high-water marks along the southern coastline of New England in Connecticut, Rhode Island, and Massachusetts had elevations that ranged from 3.1 to 7.5 ft, with an average of 4.3 ft and a median of 4.9 ft. Total water level elevations for 19 USGS temporary water-level sensors from Portland to Cape Cod Bay ranged from 6.2 to 10.4 ft, with an average of 8.4 ft and a median of 8.7 ft. Total water level elevations at 10 tide gages and 6 coastal streamgages from Portland to Cape Cod Bay ranged from 7.8 to 10.8 ft, with an average of 9.1 ft and a median of 9.2 ft. There were 10 tide gages and 5 coastal streamgages with data from both nor’easters from Portland to Cape Cod Bay; for the January nor’easter, the average and median elevations were about 0.3 and 0.5 ft higher, respectively, than for the March nor’easter. At the 52 high-water mark locations with data for both nor’easters in Massachusetts, the average and median elevations were 0.1 and 0.4 ft higher, respectively, for the January nor’easter than for the March nor’easter. At 10 tide gages along the coastline from Portland to Cape Cod Bay, the observed peak total water level elevations for the January nor’easter ranged from 1.6 to 3.7 ft higher than the concurrent predicted elevations, with an average of 2.8 ft and a median of 3.0 ft higher. For the March nor’easter, the observed peak total water level elevations ranged from 1.8 to 4.0 ft higher than the concurrent predicted elevations, with an average of 2.7 ft and a median of 3.0 ft higher. This is approximately the amount of storm surge that was experienced during the highest tides of the two nor’easters along the coastline from Portland to Cape Cod Bay.

Connecticut, Maine, Massachusetts, New Hampshire, ↗
USGS2022

GPS velocity field of the Western United States for the 2023 National Seismic Hazard Model update

Global Positioning System (GPS) velocity solutions of the western United States (WUS) are compiled from several sources of field networks and data processing centers for the 2023 U.S. Geological Survey National Seismic Hazard Model (NSHM). These solutions include both survey and continuous‐mode GPS velocity measurements. I follow the data processing procedure of Parsons et al. (2013) for the Uniform California Earthquake Rupture Forecast, version 3 and McCaffrey, Bird, et al. (2013) and Zeng and Shen (2013) for their WUS deformation models in support of the 2014 NSHM update. All GPS velocity vectors are first rotated to a common North American reference frame. I edit the velocities to remove outliers and data with significant influence from volcanism. The solutions are then combined into a final GPS velocity field consisting of 4979 horizontal velocity vectors. I compute strain rates based on these GPS velocities using the method of Shen et al. (2015) . These strain rates correlate closely with seismicity rates in the WUS. The results are used for WUS geodetic and geologic deformation modeling in support of the 2023 NSHM update.

Seismological Research Letters↗
USGS2026

Cambrian and Ordovician stratigraphy, conodont biostratigraphy, and microfacies analysis to support 1:24,000-scale geologic mapping of the southern Lake Champlain valley, New York and Vermont

Introduction Geologic mapping in the southern Lake Champlain valley of New York and Vermont (fig. 1) has required evaluation of stratigraphic nomenclature used since the early 1900s. The paleogeography of the Cambrian and Ordovician adjacent to the Adirondack Highlands, the high-relief mountains of Proterozoic igneous and metamorphic rocks of northern New York, has impacted the lithostratigraphic succession, facies changes, and several hiatuses that occur within the package of clastic and carbonate rocks that demonstrates overall deepening consistent from the southern to northern Appalachians. The stratigraphic nomenclature used for the geologic mapping of the Cambrian and Ordovician strata of the study area is derived from evaluation of names put forth by previous workers from areas of northern New York and western Vermont. Descriptions of type localities or type sections and other criteria set forth by the North American Stratigraphic Code (North American Commission on Stratigraphic Nomenclature [NACSN], 2021) were consulted. The North American Stratigraphic Code states that lithostratigraphic units, such as the fundamental unit, the formation, be defined by lithic character and be mappable (NACSN, 2021, Article 24). However, some early workers (Walcott, 1912; Kay, 1937; Fisher and Hanson, 1951; Oxley and Kay, 1959) have defined stratigraphic units based on fossil content, which may or may not be facies dependent, and hence may not be mappable as lithostratigraphic units. Although preservation of older names takes priority in stratigraphic nomenclature (NACSN, 2021, Article 7), some do not have adequately defined stratotypes or are located a distance away with different lithologies than that in the study area. Biostratigraphy can be a helpful tool for understanding correlations and facies changes. Herein, conodont biostratigraphy is utilized to date and correlate separate lithologic units. Further, microfacies analyses of units through inspection of petrographic thin sections provide paleogeographic information that helps in understanding the genesis of geologic units.

New York, Vermont↗
USGS2012

Climate model simulations of the mid-Pliocene: Earth's last great interval of global warmth

Pliocene Model Intercomparison Project Workshop; Reston, Virginia, 2–4 August 2011 The Pliocene Model Intercomparison Project (PlioMIP), supported by the U.S. Geological Survey's (USGS) Pliocene Research, Interpretation and Synoptic Mapping (PRISM) project and Powell Center, is an integral part of a third iteration of the Paleoclimate Modelling Intercomparison Project (PMIP3). PlioMIP's aim is to systematically compare structurally different climate models. This is done in the context of the mid-Pliocene (~3.3–3.0 million years ago), a geological interval when the global annual mean temperature was similar to predictions for the next century.

Eos, Transactions, American Geophysical Union↗