Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS1999

Ghaba salt basin province and Fahud salt basin province, Oman; geological overview and total petroleum systems

Three Total Petroleum Systems each consisting of one assessment unit have been identified in the Ghaba and Fahud Salt Basin Provinces of north-central Oman. One Total Petroleum System and corresponding assessment unit, the North Oman Huqf/?Q??Haushi(!) Total Petroleum System (201401) and Ghaba- Makarem Combined Structural Assessment Unit (20140101), were identified for the Ghaba Salt Basin Province (2014). In the Fahud Salt Basin Province, however, two overlapping Total Petroleum Systems (TPS) were recognized: (1) the North Oman Huqf?Shu?aiba(!) TPS (201601); Fahud-Huqf Combined Structural Assessment Unit (20160101), and (2) the middle Cretaceous Natih(!) TPS (201602); Natih-Fiqa Structural/Stratigraphic Assessment Unit (20160201). The boundary for each Total Petroleum System also defines the boundary of the corresponding assessment unit and includes all trap styles and hydrocarbon-producing reservoirs within the petroleum system. In both the Ghaba and Fahud Salt Basin Provinces, hydrocarbons were generated from several deeply buried source rocks within the Infracambrian Huqf Supergroup. One general ?North Oman Huqf? type oil is dominant in the Fahud Salt Basin. Oils in the Ghaba Salt Basin are linked to at least two distinct Huqf source-rock units based on oil geochemistry: a general North Oman Huqf-type oil source and a more dominant ?questionable unidentified source? or ?Q?-type Huqf oil source. These two Huqf-sourced oils are commonly found as admixtures in reservoirs throughout northcentral Oman. Hydrocarbons generated from Huqf sources are produced from a variety of reservoir types and ages ranging from Precambrian to Cretaceous in both the Ghaba and Fahud Salt Basin Provinces. Clastic reservoirs of the Gharif and Al Khlata Formations, Haushi Group (middle Carboniferous to Lower Permian), dominate oil production in the Ghaba Salt Basin Province and form the basis for the Huqf/?Q??Haushi(!) TPS. In contrast, the Lower Cretaceous Shu?aiba and middle Cretaceous Natih limestones account for most of the production in the Fahud Salt Basin with about 50 percent of the basin?s production from porous, fractured Shu?aiba limestones in Yibal field, thus the name North Oman Huqf? Shu?aiba(!) TPS. Deep gas is produced mainly from Middle Cambrian to Lower Ordovician clastic reservoirs of the Haima Supergroup. Traps in nearly all hydrocarbon accumulations of these petroleum systems are mainly structural and were formed by one or more 3 mechanisms. These trap-forming mechanisms were mainly periodic halokinesis of the thick Cambrian Ara Salt and consequent folding and faulting from basin loading, rifting, or other major tectonic events, particularly those events forming the Oman Mountains and associated foreland-basin system during the Late Cretaceous and late Tertiary. Many of the future new-field targets will likely be low-relief, subtle structures, as many of the large structures have been drilled. Oman?s recent interest and commitments to liquid natural gas export make deep gas a primary objective in the two North Oman Huqf petroleum systems. New-field exploration of deep gas and exploring deeper targets for gas in existing fields will likely identify a significant gas resource in the next 30 years. Moreover, salt-diapir flank traps in these two North Oman Huqf petroleum systems and salt basin provinces have gone essentially untested and will likely be targeted in the near future. The middle Cretaceous Natih(!) TPS is a small efficient system of the Fahud Salt Basin. Natih source rocks are only mature in the Late Cretaceous/Tertiary foredeep and production is primarily from Natih reservoirs; minor production from the Shu?aiba limestone is documented along fault-dip structures. Most traps are structural and are related to development of the foreland basin and formation of the Oman Mountains. Future targets of the Natih TPS will be less obvious

Bulletin↗
USGS2003

Petroleum system and production characteristics of the Muddy (J) Sandstone (Lower Cretaceous) Wattenberg continuous gas field, Denver basin, Colorado

Wattenberg field is a continuous-type gas accumulation. Estimated ultimate recovery from current wells is 1.27 tcf of gas from the Lower Cretaceous Muddy (J) Sandstone. Mean gas resources that have the potential to be added to these reserves in the next 30 yr are 1.09 tcf; this will be primarily through infill drilling to recover a greater percentage of gas in place and to drain areas that are isolated because of geologic compartmentalization. Greatest gas production from the Muddy (J) Sandstone in Wattenberg field occurs (1) from within the most permeable and thickest intervals of Fort Collins Member delta-front and nearshore-marine sandstones, (2) to a lesser extent from the Horsetooth Member valley-fill channel sandstones, (3) in association with a large thermal anomaly that is delineated by measured temperatures in wells and by vitrinite reflectance contours of 0.9% and greater, (4) in proximity to the bounding Mowry, Graneros, and Skull Creek shales that are the hydrocarbon source rocks and reservoir seals, and (5) between the Lafayette and Longmont right-lateral wrench fault zones (WFZs) with secondary faults that act as conduits in areas of the field. The axis of greatest gas production is north 25 to 35 degrees northeast, which parallels the basin axis. Recurrent movement along five right-lateral WFZs that crosscut Wattenberg field shifted the Denver basin axis to the northeast and influenced depositional and erosional patterns of the reservoir and seal intervals. Levels of thermal maturity within the Wattenberg field are anomalously high compared to other areas of the Denver basin. The Wattenberg field thermal anomaly may be due to upward movement of fluids along faults associated with probable igneous intrusions. Areas of anomalous high heat flow within the field correlate with an increased and variable gas-oil ratio. Debra Higley has 5 years experience in uranium exploration and 20 years as a petroleum geologist with the U.S. Geological Survey. Her research interests include and integrate reservoir characterization, thermal maturation studies, and petroleum resource assessment in basins in North and South America. She received a B.S. degree in geology from Mesa State College (Colorado) and an M.S. degree in geochemistry and Ph.D. in geology from the Colorado School of Mines.Dave Cox is vice president of Reservoir Engineering for Questa Engineering in Golden, Colorado. He has 25 years experience in the oil and gas industry, primarily in reservoir engineering and property evaluations, and has analyzed reservoirs in 31 states of the United States and 19 other countries. He is an expert in coalbed methane, tight gas reservoirs, and enhanced oil recovery. He has B.S. and M.S. degrees in petroleum engineering from the Colorado School of Mines. Robert Weimer has taught courses in stratigraphy, regional and field geology, and energy resource exploration and development for 43 years. He earned B.A. and M.A. degrees from the University of Wyoming and his Ph.D. from Stanford University. He has been a visiting professor at universities in Calgary, Canada; Adelaide, Australia; and Bandung, Indonesia. He is currently professor emeritus, Colorado School of Mines. Weimer has been honored for teaching excellence, blending basic and applied research, national and international continuing education, and service to scientific societies and to state and national boards.

Colorado↗
USGS2021

Machine learning to identify geologic factors associated with production in geothermal fields: A case-study using 3D geologic data, Brady geothermal field, Nevada

In this paper, we present an analysis using unsupervised machine learning (ML) to identify the key geologic factors that contribute to the geothermal production in Brady geothermal field. Brady is a hydrothermal system in northwestern Nevada that supports both electricity production and direct use of hydrothermal fluids. Transmissive fluid-flow pathways are relatively rare in the subsurface, but are critical components of hydrothermal systems like Brady and many other types of fluid-flow systems in fractured rock. Here, we analyze geologic data with ML methods to unravel the local geologic controls on these pathways. The ML method, non-negative matrix factorization with k -means clustering (NMF k ), is applied to a library of 14 3D geologic characteristics hypothesized to control hydrothermal circulation in the Brady geothermal field. Our results indicate that macro-scale faults and a local step-over in the fault system preferentially occur along production wells when compared to injection wells and non-productive wells. We infer that these are the key geologic characteristics that control the through-going hydrothermal transmission pathways at Brady. Our results demonstrate: (1) the specific geologic controls on the Brady hydrothermal system and (2) the efficacy of pairing ML techniques with 3D geologic characterization to enhance the understanding of subsurface processes.

Nevada↗
USGS2021

Dating by cosmogenic nuclides

Since the 1990s, cosmogenic nuclides have revolutionized the study of Earth surface processes, particularly the understanding of rates and dates. These nuclides, including 3 He, 10 Be, 14 C, 21 Ne, 26 Al, and 36 Cl, enable dating of landforms and the measurement of erosion rates both at the scale of drainage basins and at specific locations on Earth's surface. Cosmogenic nuclides are produced at low rates (several to hundreds of atoms per gram per year) by the interaction of cosmic rays with elements both in the atmosphere and in surficial materials, including in rock and soil. Measuring nuclide concentrations requires elemental separation from source geologic material followed by counting of atoms using sensitive accelerator mass spectrometers. Because nuclide production rates have been quantified, the measured concentration of these nuclides can be interpreted as a near-surface residence time. Here, we review the systematics of commonly used cosmogenic nuclides, describe how they are extracted and measured, and then present case studies focusing on the most commonly measured cosmogenic nuclide, 10 Be. We present common applications such as dating surface features, including moraines and outcrops shaped by glaciation, the use of cosmogenic nuclides for inferring tectonic and erosion processes in drainage basins, and the use of these nuclides to trace sediment sources in drainage basins. When multiple nuclides are measured in one sample, they can be used to model burial and exposure histories in stratigraphic sections. We conclude by exploring what the future might bring in terms of measurements and applications.

Book chapter↗
USGS2019

Age of the dacite of Sunset Amphitheater, a voluminous Pleistocene tephra from Mount Rainier (USA), and implications for Cascade glacial stratigraphy

The dacite of Sunset Amphitheater, Mount Rainier (USA), illustrates the difficulties in establishing accurate ages of Pleistocene tephra eruptions. Nearly uniform whole-rock, glass, and mineral compositions, texture, and phenocryst assemblage establish that certain conspicuous dissected pumice exposures scattered from Mount Rainier to southern Puget Sound are products of the same Pleistocene Plinian eruption . Deposit thicknesses and pumice sizes support an eruption on the order of low Volcanic Explosivity Index (VEI) 5, atypically explosive for dominantly lava-producing Mount Rainier. Statistically permissible 40 Ar/ 39 Ar plateau ages of plagioclase phenocryst separates are 138 ± 20 ka and 101 ± 11 ka (2σ). A previously published result of 206 ± 11 ka is herein shown to result from a sample selection error. Zircon from the pumice yields a U-Th crystallization age of 147 ± 8 ka if the isochron is required to pass through the tephra U-Th isotopic composition . In contrast, pooled (U-Th)/He measurements on the zircon yield an age of 85 ± 6 ka (2σ), which accords with well-behaved 40 Ar/ 39 Ar ages of stratigraphically associated lavas high on Mount Rainier, and is the best estimate of the pumice's true eruption age. Inclusions of undegassed melt (glass) in the plagioclase separates are proposed as biasing apparent 40 Ar/ 39 Ar plateau ages to old values through coupling of undegassed magmatic excess Ar with radiogenic Ar that accumulated post-eruptively from relatively K-rich glass. U-Th ages record zircon growth prior to eruption, consistent with a possible complex history of advanced solidification followed by remobilization . The ca. 85 ka eruption age confirms that bracketing glacial tills on the flanks of Mount Rainier were products of the Penultimate Glaciation (MIS 6) and Last Glacial Maximum (MIS 2). This eruption age also provides an important time marker for glacial and other sedimentary deposits in southern Puget Sound lowland that, excepting the Vashon Drift (MIS 2), generally lack reliable age determinations.

Washington↗
USGS1983

Isotopic evidence from the eastern Canadian shield for geochemical discontinuity in the proterozoic mantle

Most workers agree that Proterozoic anorthosite massifs represent the crystallization products of mantle-derived magmas1,2, although the composition of the parental melts is a major unsolved petrological problem 3. As mantle-derived rocks, the massifs can be used as geochemical probes of their late Precambrian upper mantle sources. We report here Nd and Sr isotopic compositions of anorthosites and related rocks from the Grenville and Nain Provinces of the eastern Canadian shield. Here 75% of the Earth's known anorthosite is found in a 1,600-km belt from the Adirondack Mountains of northern New York State to the eastern coast of Labrador4 (Fig. 1). The results indicate that the massifs were derived from at least two distinct mantle source regions which were established before 1,650 Myr ago, and were episodically involved in magmatism over ???500 Myr. One reservoir, below the Grenville Province, and probably below much of the eastern Superior Province, was isotopically similar to the depleted, modern-day mid-ocean ridge basalt (MORB) source. The other reservoir was chondritic to moderately enriched, and is most easily identified in the Nain Province, but may have occurred scattered throughout the Superior Province. ?? 1983 Nature Publishing Group.

Nature↗
USGS1997

Coal fields and federal lands of the conterminous United States

The map depicts the relationship of coal and public lands in the conterminous U. S. Multiple GIS layers are being created for the purpose of deriving estimates of how much coal is owned and administered by the Federal government. Federal coal areas have a profound effect on land-management decisions. Regulatory agencies attempt to balance energy development with alternative land-use and environmental concerns. A GIS database of Federal lands used in energy resource assessments is being developed by the U. S. Geological Survey (USGS) in cooperation with the U.S. Bureau of Land Management (BLM) to integrate information on status of public land, and minerals owned by the Federal government with geologic information on coal resources, other spatial data, coal quality characteristics, and coal availability for development. Using national-scale data we estimate that approximately 60 percent of the area underlain by coal-bearing rocks in the conterminous United States are under Federal surface. Coal produced from Federal leases has tripled from about 12 percent of the total U.S. production in 1976 to almost 34 percent in 1995 (Energy Information Administration website ftp://ftp.eia.doe.gov/pub/coal/cia_95_tables/t13p01.txt). The reason for this increase is demand for low-sulfur coal for use in power plants and the fact that large reserves of this low-sulfur coal are in the western interior U.S., where the Federal government owns the rights to most of the coal reserves. The map was created using Arc/Info 7.0.3 on a UNIX system. The HPGL2 plot file for this map is available from the USGS Energy Resource Surveys Team from http://energy.cr.usgs.gov:8080/energy/coal.html.

Conterminous United States↗
USGS1984

Evidence for magma mixing within the Laacher See magma chamber (East Eifel, Germany)

The final pyroclastic products of the late Quaternary phonolitic Laacher See volcano (East Eifel, W.-Germany) range from feldspar-rich gray phonolite to dark olivine-bearing rocks with variable amounts of feldspar and Al-augite megacrysts. Petrographically and chemically homogeneous clasts occur along with composite lapilli spanning the compositional range from phonolite (MgO 0.9%) to mafic hybrid rock (MgO 7.0%) for all major and trace elements. Both a basanitic and a phonolitic phenocryst paragenesis occur within individual clasts. The phonolite-derived phenocrysts are characterized by glass inclusions of evolved composition, rare inverse zoning and strong resorption indicating disequilibrium with the mafic hybrid matrix. Basanitic (magnesian) clinopyroxene and olivine, in contrast, show skeletal (normally zoned) overgrowths indicative of post-mixing crystallization. In accord with petrographical and other chemical evidence, mass balance calculations suggest mixing of an evolved Laacher See phonolite containing variable amounts of mineral cumulates and a megacryst-bearing basanite magma. Magma mixing occurred just prior to eruption (hours) of the lowermost magma layer of the Laacher See magma chamber but did not trigger the volcanic activity. ?? 1984.

Journal of Volcanology and Geothermal Research↗
USGS1999

Ghaba salt basin province and Fahud salt basin province, Oman; geological overview and total petroleum systems

Three Total Petroleum Systems each consisting of one assessment unit have been identified in the Ghaba and Fahud Salt Basin Provinces of north-central Oman. One Total Petroleum System and corresponding assessment unit, the North Oman Huqf/`Q'? Haushi(!) Total Petroleum System (201401) and Ghaba-Makarem Combined Structural Assessment Unit (20140101), were identified for the Ghaba Salt Basin Province (2014). In the Fahud Salt Basin Province, however, two overlapping Total Petroleum Systems (TPS) were recognized: 1) the North Oman Huqf ? Shu'aiba(!) TPS (201601); Fahud-Huqf Combined Structural Assessment Unit (20160101), and 2) the Middle Cretaceous Natih(!) TPS (201602); Natih-Fiqa Structural/Stratigraphic Assessment Unit (20160201). The boundary for each Total Petroleum System also defines the boundary of the corresponding assessment unit and includes all trap styles and hydrocarbon producing reservoirs within the petroleum system. In both the Ghaba and Fahud Salt Basin Provinces, hydrocarbons were generated from several deeply-buried source rocks within the Infracambrian Huqf Supergroup. One general `North Oman Huqf' type oil is dominant in the Fahud Salt Basin. Oils in the Ghaba Salt Basin are linked to at least two distinct Huqf source-rock units based on oil geochemistry: a general North Oman Huqf-type oil source and a more dominant `questionable unidentified-source' or `Q'-type Huqf oil source. These two Huqf-sourced oils are commonly found as admixtures in reservoirs throughout north-central Oman. Hydrocarbons generated from Huqf sources are produced from a variety of reservoir types and ages ranging from Precambrian to Cretaceous in both the Ghaba and Fahud Salt Basin Provinces. Clastic reservoirs of the Gharif and Al Khlata Formations, Haushi Group (M. Carboniferous to L. Permian), dominate oil production in the Ghaba Salt Basin Province and form the basis for the Huqf/`Q' ? Haushi(!) TPS. In contrast, the Lower Cretaceous Shu'aiba and Middle Cretaceous Natih limestones account for most of the production in the Fahud Salt Basin with about 50 percent of the basin's production from porous, fractured Shu'aiba limestones in Yibal field, thus the name North Oman Huqf ? Shu'aiba(!) TPS. Deep gas is produced mainly from Middle Cambrian to Lower Ordovician clastic reservoirs of the Haima Supergroup. Traps in nearly all hydrocarbon accumulations of these petroleum systems are mainly structural and were formed by one or more mechanisms. These trap-forming mechanisms were mainly periodic halokinesis of the thick Cambrian Ara Salt and consequent folding and faulting from basin loading, rifting, or other major tectonic events, particularly those events forming the Oman Mountains and associated foreland-basin system during the Late Cretaceous and Late Tertiary. Many of the future new-field targets will likely be low-relief, subtle structures, as many of the large structures have been drilled. Oman's recent interest and commitments to liquid natural gas export make deep gas a primary objective in the two North Oman Huqf petroleum systems. New-field exploration of deep gas and exploring deeper targets for gas in existing fields will likely identify a significant gas resource in the next thirty years. Moreover, salt-diapir flank traps in these two North Oman Huqf petroleum systems and salt basin provinces have gone essentially untested and will likely be targeted in the near-future. The Middle Cretaceous Natih(!) TPS is a small efficient system of the Fahud Salt Basin. Natih source rocks are only mature in the Late Cretaceous/Tertiary foredeep and production is primarily from Natih reservoirs; minor production from the Shu'aiba limestone is documented along fault-dip structures. Most traps are structural and are related to development of the foreland basin and formation of the Oman Mountains. Future targets of the Natih TPS will be less obvious than those of Fahud and Natih fields and likely includ

Open-File Report↗
USGS2012

Using rocks to reveal the inner workings of magma chambers below volcanoes in Alaska’s National Parks

Alaska is one of the most vigorously volcanic regions on the planet, and Alaska’s national parks are home to many of the state’s most active volcanoes. These pose both local and more distant hazards in the form of lava and pyroclastic flows, lahars (mudflows), ash clouds, and ash fall. Alaska’s volcanoes lie along the arc of the Aleutian-Alaskan subduction zone, caused as the oceanic Pacific plate moves northward and dips below the North American plate. These volcanoes form as water-rich fluid from the down-going Pacific plate is released, lowering the melting temperature of rock in the overlying mantle and enabling it to partially melt. The melted rock (magma) migrates upward, collecting at the base of the approximately 25 mile (40 km) thick crust, occasionally ascending into the shallow crust, and sometimes erupting at the earth’s surface. During volcanic unrest, scientists use geophysical signals to remotely visualize volcanic processes, such as movement of magma in the upper crust. In addition, erupted volcanic rocks, which are quenched samples of magmas, can tell us about subsurface magma characteris-tics, history, and the processes that drive eruptions. The chemical compositions of and the minerals present in the erupted magmas can reveal conditions under which these magmas were stored in crustal “chambers”. Studies of the products of recent eruptions of Novarupta (1912), Aniakchak (1931), Trident (1953-74), and Redoubt (2009) volcanoes reveal the depths and temperatures of magma storage, and tell of complex interactions between magmas of different compositions. One goal of volcanology is to determine the processes that drive or trigger eruptions. Information recorded in the rocks tells us about these processes. Here, we demonstrate how geologists gain these insights through case studies from four recent eruptions of volcanoes in Alaska national parks.

Alaska↗
USGS1988

Experimental Mycoplasma gallisepticum infections in captive-reared wild turkeys

The effects of Mycoplasma gallisepticum (MG) infections on egg production, fertility, and hatchability were studied in captive-reared wild turkeys ( Meleagris gallopavo ). Three groups of adult birds, each consisting of four hens and two toms, were exposed to MG by the respiratory route at the beginning of their breeding season. Fourteen control birds received sterile growth medium. Although no mortality of infected or control birds occurred, egg production during the first breeding season after infection was reduced. The mean number of eggs/hen/day produced by infected groups the first breeding season postexposure (PE) was significantly lower than the control value. The mean number of eggs produced daily by the same hens 1 yr later was unaffected by MG infection. The pecentage of fertile eggs produced by infected groups was slightly reduced in both the first and second breeding seasons PE. Hatchability of fertile eggs from infected hens was significantly lower than eggs from control hens. Productivity may be impaired if MG infections occur in free-ranging wild turkey populations.

Journal of Wildlife Diseases↗
USGS2003

Comparison of artificial maturation of lignite in hydrous and nonhydrous conditions

The objectives of the study are to compare product compositions and yields generated from lignite artificially matured by open nonhydrous pyrolysis, closed nonhydrous pyrolysis, and hydrous pyrolysis. The pyrolysis products were fractionated into CO2, H2O, CH4, C2-C5, C8-C14, C14+ saturates, C14+ aromatics and NSOs (resins+asphaltenes). All three methods generated high and similar quantities of water during pyrolysis that ranged between 14.6 and 15.2 wt.% of the original lignite. As a result of this high water content generated by the lignite, the experiments with no added water are referred to as nonhydrous rather than anhydrous. Rock-Eval pyrolysis and elemental analyses were conducted on the recovered lignite after solvent extraction to determine their residual hydrocarbon generation potential and to plot their position in a van Krevelen diagram, respectively. Residual lignite from the closed nonhydrous and hydrous experiments showed relationships between vitrinite reflectance (%Ro) values and atomic H/C ratios that occurred within the fields observed for natural maturation of coal. Although no significant differences in the atomic H/C ratios were observed between closed nonhydrous and hydrous pyrolysis, the vitrinite reflectance values were on the average 0.2% Ro lower in the residual lignite from the nonhydrous experiments. The remaining hydrocarbon generation potential as determined by Rock-Eval pyrolysis of the residual lignite showed that the nonhydrous residuals had on the average 16 mg more hydrocarbon potential per gram of original lignite than the hydrous residuals. This suggests there is a better release of the pyrolysis products from the lignite network in the hydrous experiments once generation occurs. For gas generation, at maximum yields, open nonhydrous pyrolysis generates the most hydrocarbon gas (21.0 mg/g original lignite), which is 20% more than closed nonhydrous pyrolysis and 29% more than hydrous pyrolysis. Closed nonhydrous pyrolysis generates on the average 14% more gas than hydrous pyrolysis, but the proportionality of the generated hydrocarbon gases is essentially the same for both pyrolysis methods. At maximum yields, CO2 generation is greatest in hydrous pyrolysis (99.5 mg/g original lignite), with yields being 37 percent higher than closed nonhydrous pyrolysis and 26% higher than open nonhydrous pyrolysis. The maximum yields of C14+ products are highest and similar for open nonhydrous pyrolysis and hydrous pyrolysis (125.6 and 125.9 mg/g lignite, respectively), and are more than 70% higher than closed nonhydrous pyrolysis. This difference in the maximum yields of C14+ products can be explained by differences in the proportionality between either cracking reactions that result in liquid product and char formation or trapping of generated products within the coal network (cross-linking reactions). Maximum yields of C14+ aliphatics from hydrous experiments may not have been attained, but the maximums that were observed and their GC traces are similar for the three pyrolysis systems.

Organic Geochemistry↗
USGS2018

Shrimp U-Pb zircon and opal geochronology, isotope geochemistry, and genesis of the super large Be deposit at Spor Mountain, Utah, USA

Ongoing studies of the Spor Mountain beryllium (Be) deposit are focused on (1) characterizing the role of igneous rocks in the genesis of the ore zones, (2) determining the timing and duration of magmatic-hydrothermal events, and (3) establishing processes related to beryllium transport and accumulation. The Spor Mountain Formation (SMF) hosts the deposit, which is the largest known volcanic rock-related Be deposit in the world. Discovery of the Be deposit at Spor Mountain in the 1960s displaced beryl as the main commercial source of beryllium in the global supply chain. Technological advances in mineral processing enabled bertrandite (Be4Si2O7(OH)2) ore of variable grade and composition from Spor Mountain to compete with beryl ore derived from pegmatite. The deposit currently accounts for approximately 85% of the global beryllium mine production. The Be deposit is in the Basin and Range province of North America, which is characterized by Oligocene and Eocene calderas, extensive alkalic rhyolitic lava and ash flow tuffs, widespread uranium and fluorite occurrences, and Precambrian to Paleozoic sedimentary rocks. The SMF consists of a hydrothermally-altered, fluorite-bearing, lithic-rich (clasts of carbonate, quartzite, and older volcanic rocks) pyroclastic tuff (informal name: Be tuff member) that is overlain by altered, porphyritic, and topaz-rich rhyolite (alkali rhyolite member). The tuff encloses elongate mineralized layers containing numerous nodules that consist of calcite, chalcedony, opal, fluorite, and bertrandite (Be4Si2O7(OH)2, the main ore mineral.

Utah↗
USGS2008

Characteristics, extent and origin of hydrothermal alteration at Mount Rainier Volcano, Cascades Arc, USA: Implications for debris-flow hazards and mineral deposits

Hydrothermal alteration at Mount Rainier waxed and waned over the 500,000-year episodic growth of the edifice. Hydrothermal minerals and their stable-isotope compositions in samples collected from outcrop and as clasts from Holocene debris-flow deposits identify three distinct hypogene argillic/advanced argillic hydrothermal environments: magmatic-hydrothermal, steam-heated, and magmatic steam (fumarolic), with minor superimposed supergene alteration. The 3.8 km 3 Osceola Mudflow (5600 y BP) and coeval phreatomagmatic F tephra contain the highest temperature and most deeply formed hydrothermal minerals. Relatively deeply formed magmatic-hydrothermal alteration minerals and associations in clasts include quartz (residual silica), quartz–alunite, quartz–topaz, quartz–pyrophyllite, quartz–dickite/kaolinite, and quartz–illite (all with pyrite). Clasts of smectite–pyrite and steam-heated opal–alunite–kaolinite are also common in the Osceola Mudflow. In contrast, the Paradise lahar, formed by collapse of the summit or near-summit of the edifice at about the same time, contains only smectite–pyrite and near-surface steam-heated and fumarolic alteration minerals. Younger debris-flow deposits on the west side of the volcano (Round Pass and distal Electron Mudflows) contain only low-temperature smectite–pyrite assemblages, whereas the proximal Electron Mudflow and a < 100 y BP rock avalanche on Tahoma Glacier also contain magmatic-hydrothermal alteration minerals that are exposed in the avalanche headwall of Sunset Amphitheater, reflecting progressive incision into deeper near-conduit alteration products that formed at higher temperatures. The pre-Osceola Mudflow alteration geometry is inferred to have consisted of a narrow feeder zone of intense magmatic-hydrothermal alteration limited to near the conduit of the volcano, which graded outward to more widely distributed, but weak, smectite–pyrite alteration within 1 km of the edifice axis, developed chiefly in porous breccias. The edifice was capped by a steam-heated alteration zone, most of which resulted from condensation of fumarolic vapor and oxidation of H 2 S in the unsaturated zone above the water table. Weakly developed smectite–pyrite alteration extended into the west and east flanks of the edifice, spatially associated with dikes that are localized in those sectors; other edifice flanks lack dikes and associated alteration. The Osceola collapse removed most of the altered core and upper east flank of the volcano, but intensely altered rocks remain on the uppermost west flank. Major conclusions of this study are that: (1) Hydrothermal–mineral assemblages and distributions at Mount Rainier can be understood in the framework of hydrothermal processes and environments developed from studies of ore deposits formed in analogous settings. (2) Frequent eruptions supplied sufficient hot magmatic fluid to alter the upper interior of the volcano hydrothermally, despite the consistently deep (≥ 8 km) magma reservoir which may have precluded formation of economic mineral deposits within or at shallow depths beneath Mount Rainier. The absence of indicator equilibrium alteration-mineral assemblages in the debris flows that effectively expose the volcano to a depth of 1–1.5 km also suggests a low potential for significant high-sulfidation epithermal or porphyry-type mineral deposits at depth. (3) Despite the long and complex history of the volcano, intensely altered collapse-prone rocks were spatially restricted to near the volcano's conduit system and summit, and short distances onto the upper east and west flanks, due to the necessary supply of reactive components carried by ascending magmatic fluids. (4) Intensely altered rocks were removed from the summit, east flank, and edifice interior by the Osceola collapse, but remain on the upper west flank in the Sunset Amphitheater area and present a continuing collapse hazard. (5) Visually conspicuous rocks on the lower east and mid-to-lower west flanks are not intensely altered and probably have not significantly weakened the rock, and thus do not present significant collapse hazards. (6) Alteration developed most intensely within breccia units, because of their high permeability and porosity. Volcanoes with abundant near-conduit upper-edifice breccias are prone to alteration increasing the possibility of collapse, whereas those that are breccia-poor (e.g., massive domes) are less prone to alteration.

Journal of Volcanology and Geothermal Research↗
USGS1993

The Geysers-Clear Lake area, California: Thermal waters, mineralization, volcanism, and geothermal potential

Manifestations of a major thermal anomaly in the Geysers-Clear Lake area of northern California include the late Pliocene to Holocene Clear Lake Volcanics, The Geysers geothermal field, abundant thermal springs, and epithermal mercury and gold mineralization. The epithermal mineralization and thermal springs typically occur along high-angle faults within the broad San Andreas transform fault system that forms the western boundary of the North American plate in this area. The young volcanic rocks overlie Mesozoic marine rocks of the Great Valley sequence which have been thrust above the coeval Franciscan Complex and penecontemporaneously dropped back down along low-angle detachment faults.Many of the waters of the region are nonmeteoric as defined by their isotopic signature. One type of isotopically shifted water emerges from or near Great Valley sequence rocks and is the most chloride rich. It is interpreted to be evolved connate in origin. A second type, evolved meteoric water, has moderate chloride contents, high boron contents, and high B/Cl ratios and is found locally in Franciscan rocks, notably at the Sulphur Bank mercury mine, where it probably results from near-closed-system, repeated boiling of meteoric water in host rocks that also contribute organic components to the water. At the Sulphur Bank mine fracturing of otherwise impermeable Franciscan rocks by faulting has created a localized zone of permeability in which thermal water boils repeatedly with limited venting to the surface. Boron-rich fluids were apparently present at depth in The Geysers geothermal field when intrusion of silicic magma occurred, because the concealed intrusion of felsite is surrounded by a halo of tourmaline-bearing hornfels. The volume of this poorly dated early to middle Quaternary intrusive body probably exceeds the 100 km 3 of erupted Clear Lake Volcanics. Similar intrusions may have occurred in the eastern part of the area at Wilbur Springs and the McLaughlin mine, where gold deposition and evidence of hydrothermal phenomena suggest more magmatic activity than is indicated by the small exposed bodies of early Quaternary basaltic lava. The Clear Lake Volcanics are the present locus of volcanism in the northern Coast Ranges and progressively older volcanic centers occur to the south. Geophysical data suggest that a large silicic magma body may be centered north of The Geysers steam field, providing the heat for the geothermal field.Geothermal power production has peaked at The Geysers and pressure declines indicate significant depletion of the fluid resource. The vapor-dominated field evolved from a preexisting hydrothermal system within fractured, otherwise impermeable Franciscan metamorphic rocks. A deep water table of saline fluid has been postulated to be present under the steam field, but no chloride-rich water has been found at drillable depth. We propose that recently discovered, isotopically shifted steam in the northwest Geysers area indicates the presence not of deep connate water but xather of boiled-down, boron-rich Franciscan evolved meteoric water. This water is likely to be present in limited quantities and will not provide a significant hot water resource for geothermal power production at The Geysers field or from the main Clear Lake volcanic field.

Economic Geology↗
USGS2017

Titanium

Titanium is a mineral commodity that is essential to the smooth functioning of modern industrial economies. Most of the titanium produced is refined into titanium dioxide, which has a high refractive index and is thus able to impart a durable white color to paint, paper, plastic, rubber, and wallboard. Because of their high strength-to-weight ratio and corrosion resistance, titanium metal and titanium metal alloys are used in the aerospace industry as well as for welding rod coatings, biological implants, and consumer goods. Ilmenite and rutile are currently the principal titanium-bearing ore minerals, although other minerals, including anatase, perovskite, and titanomagnetite, could have economic importance in the future. Ilmenite is currently being mined from two large magmatic deposits hosted in rocks of Proterozoic-age anorthosite plutonic suites. Most rutile and nearly one-half of the ilmenite produced are from heavy-mineral alluvial, fluvial, and eolian deposits. Titanium-bearing minerals occur in diverse geologic settings, but many of the known deposits are currently subeconomic for titanium because of complications related to the mineralogy or because of the presence of trace contaminants that can compromise the pigment production process. Global production of titanium minerals is currently dominated by Australia, Canada, Norway, and South Africa; additional amounts are produced in Brazil, India, Madagascar, Mozambique, Sierra Leone, and Sri Lanka. The United States accounts for about 4 percent of the total world production of titanium minerals and is heavily dependent on imports of titanium mineral concentrates to meet its domestic needs. Titanium occurs only in silicate or oxide minerals and never in sulfide minerals. Environmental considerations for titanium mining are related to waste rock disposal and the impact of trace constituents on water quality. Because titanium is generally inert in the environment, human health risks from titanium and titanium mining are minimal; however, the processes required to extract titanium from titanium feedstock can produce industrial waste.

Professional Paper↗
USGS1918

Baked shale and slag formed by the burning of coal beds

The baking and reddening of large masses of strata caused by the burning of coal beds is a striking feature of the landscape in most of the great western coal-bearing areas. The general character and broader effects of the burning have been described by many writers, but the fact that in places enough heat is generated to fuse and thoroughly recrystallize the overlying shale and sandstone has received less attention. Some of the natural slags thus formed simulate somewhat abnormal igneous rocks, but others consist largely of rare and little known minerals. A wide range in the mineral composition of such slags is to be expected, depending on the composition of the original sediment and the conditions of fusion and cooling. These products of purely thermal metamorphism offer a fertile field for petrologic investigation. The writer has observed the effects produced by the burning of coal beds in several localities in Montana, particularly along upper Tongue River in the southern part of the State, in the district lying southeast of the mouth of Bighorn River, and in the Little Sheep Mountain coal field north of Miles City. A number of specimens of the rock formed have been examined under the microscope, though time has not been available for a systematic examination. The writer is greatly indebted to Mr. E. S. Larsen for assistance in the study of some of the minerals.

Montana↗
USGS2003

Density and magnetic susceptibility values for rocks in the Talkeetna Mountains and adjacent region, south-central Alaska

This report presents a compilation and statistical analysis of 306 density and 706 magnetic susceptibility measurements of rocks from south-central Alaska that were collected by U.S. Geological Survey (USGS) and Alaska Division of Geological and Geophysical Surveys (ADGGS) scientists between the summers of 1999 and 2002. This work is a product of the USGS Talkeetna Mountains Transect Project and was supported by USGS projects in the Talkeetna Mountains and Iron Creek region, and by Bureau of Land Management (BLM) projects in the Delta River Mining District that aim to characterize the subsurface structures of the region. These data were collected to constrain potential field models (i.e., gravity and magnetic) that are combined with other geophysical methods to identify and model major faults, terrane boundaries, and potential mineral resources of the study area. Because gravity and magnetic field anomalies reflect variations in the density and magnetic susceptibility of the underlying lithology, these rock properties are essential components of potential field modeling. In general, the average grain density of rocks in the study region increases from sedimentary, felsic, and intermediate igneous rocks, to mafic igneous and metamorphic rocks. Magnetic susceptibility measurements performed on rock outcrops and hand samples from the study area also reveal lower magnetic susceptibilities for sedimentary and felsic intrusive rocks, moderate susceptibility values for metamorphic, felsic extrusive, and intermediate igneous rocks, and higher susceptibility values for mafic igneous rocks. The density and magnetic properties of rocks in the study area are generally consistent with general trends expected for certain rock types.

Alaska↗