SEARCH · Geology Reports

Results for “Research and Exploration”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

USGS2013

Colloid transport in saturated porous media: Elimination of attachment efficiency in a new colloid transport model

A colloid transport model is introduced that is conceptually simple yet captures the essential features of colloid transport and retention in saturated porous media when colloid retention is dominated by the secondary minimum because an electrostatic barrier inhibits substantial deposition in the primary minimum. This model is based on conventional colloid filtration theory (CFT) but eliminates the empirical concept of attachment efficiency. The colloid deposition rate is computed directly from CFT by assuming all predicted interceptions of colloids by collectors result in at least temporary deposition in the secondary minimum. Also, a new paradigm for colloid re-entrainment based on colloid population heterogeneity is introduced. To accomplish this, the initial colloid population is divided into two fractions. One fraction, by virtue of physiochemical characteristics (e.g., size and charge), will always be re-entrained after capture in a secondary minimum. The remaining fraction of colloids, again as a result of physiochemical characteristics, will be retained “irreversibly” when captured by a secondary minimum. Assuming the dispersion coefficient can be estimated from tracer behavior, this model has only two fitting parameters: (1) the fraction of the initial colloid population that will be retained “irreversibly” upon interception by a secondary minimum, and (2) the rate at which reversibly retained colloids leave the secondary minimum. These two parameters were correlated to the depth of the Derjaguin-Landau-Verwey-Overbeek (DLVO) secondary energy minimum and pore-water velocity, two physical forces that influence colloid transport. Given this correlation, the model serves as a heuristic tool for exploring the influence of physical parameters such as surface potential and fluid velocity on colloid transport.

Water Resources Research↗

USGS2013

Bridging groundwater models and decision support with a Bayesian network

Resource managers need to make decisions to plan for future environmental conditions, particularly sea level rise, in the face of substantial uncertainty. Many interacting processes factor in to the decisions they face. Advances in process models and the quantification of uncertainty have made models a valuable tool for this purpose. Long-simulation runtimes and, often, numerical instability make linking process models impractical in many cases. A method for emulating the important connections between model input and forecasts, while propagating uncertainty, has the potential to provide a bridge between complicated numerical process models and the efficiency and stability needed for decision making. We explore this using a Bayesian network (BN) to emulate a groundwater flow model. We expand on previous approaches to validating a BN by calculating forecasting skill using cross validation of a groundwater model of Assateague Island in Virginia and Maryland, USA. This BN emulation was shown to capture the important groundwater-flow characteristics and uncertainty of the groundwater system because of its connection to island morphology and sea level. Forecast power metrics associated with the validation of multiple alternative BN designs guided the selection of an optimal level of BN complexity. Assateague island is an ideal test case for exploring a forecasting tool based on current conditions because the unique hydrogeomorphological variability of the island includes a range of settings indicative of past, current, and future conditions. The resulting BN is a valuable tool for exploring the response of groundwater conditions to sea level rise in decision support.

Water Resources Research↗

USGS2015

Summer of Applied Geophysical Experience (SAGE): Training for our future geoscientists

Energy and natural resources are crucial to the sustainability of worldwide economies, security, and overall well-being. However, the future workforce in the energy and natural-resources sector is at risk, and meeting the challenges of this dwindling workforce requires well-educated geoscientists in exploration and applied geophysics and related geoscience and technology disciplines. Programs such as geophysical field courses that are supported by SEG and industry, in partnership with academic institutions and government laboratories, are important approaches to maintaining and enhancing expertise in exploration geophysics. One example of a geophysical field course devoted to educating our future workforce is the Summer of Applied Geophysical Experience (SAGE), a four-week program based in Santa Fe, New Mexico, designed to actively engage students in all phases of applied geophysical research. SAGE is a unique educational experience that combines teaching and research as a partnership among universities, industry, government agencies, and professional societies. SAGE teaches the principles and applications of refraction and reflection seismology, magnetics, gravity, GPS, heat flow, several electromagnetic (EM) methods, and ground-penetrating radar (GPR) in a field-based, hands-on setting. More than 850 students and qualified professionals have attended SAGE, many of whom have gone on to become leaders in academia, industry, and government. SAGE students are exposed to the exciting challenges that face earth scientists today, and they develop skills that are necessary to address the world's growing energy demands. Examples of SAGE research projects include mapping archaeological sites and tectonic structure and investigating water and geothermal resources in the Rio Grande rift.

Leading Edge (Tulsa, OK)↗

USGS2014

Movement-based estimation and visualization of space use in 3D for wildlife ecology and conservation

Advances in digital biotelemetry technologies are enabling the collection of bigger and more accurate data on the movements of free-ranging wildlife in space and time. Although many biotelemetry devices record 3D location data with x, y , and z coordinates from tracked animals, the third z coordinate is typically not integrated into studies of animal spatial use. Disregarding the vertical component may seriously limit understanding of animal habitat use and niche separation. We present novel movement-based kernel density estimators and computer visualization tools for generating and exploring 3D home ranges based on location data. We use case studies of three wildlife species – giant panda, dugong, and California condor – to demonstrate the ecological insights and conservation management benefits provided by 3D home range estimation and visualization for terrestrial, aquatic, and avian wildlife research.

PLoS ONE↗

USGS1996

Maps showing petroleum exploration intensity and production in major Cambrian to Ordovician reservoir rocks in the Anadarko Basin

The Anadarko basin is a large, deep, two-stage Paleozoic basin (Feinstein, 1981) that is petroleum rich and generally well explored. The Anadarko basin province, a geogrphic area used here mostly for the convenience of mapping and data management, is defined by political boundaries that include the Anadarko basin proper. The boundaries of the province are identical to those used by the U.S. Geological Survey (USGS) in the 1995 National Assessment of United Stated Oil and Gas Resources. The data in this report, also identical to those used in the national assessment, are from several computerized data bases including Nehring Research Group (NRG) Associates Inc., Significant Oil and Gas Fields of the United States (1992); Petroleum Information (PI), Inc., Well History Control System (1991); and Petroleum Information (PI), Inc., Petro-ROM: Production data on CD-ROM (1993). Although generated mostly in response to the national assessment, the data presented here arc grouped differently and arc displayed and described in greater detail. In addition, the stratigraphic sequences discussed may not necessarily correlate with the "plays" of the 1995 national assessment. This report uses computer-generated maps to show drilling intensity, producing wells, major fields, and other geologic information relevant to petroleum exploration and production in the lower Paleozoic part of the Anadarko basin province as defined for the U.S. Geological Survey's 1995 national petroleum assessment. Hydrocarbon accumulations must meet a minimum standard of 1 million barrels of oil (MMBO) or 6 billion cubic feet of gas (BCFG) estimated ultimate recovery to be included in this report as a major field or revoir. Mapped strata in this report include the Upper Cambrian to Lower Ordovician Arbuckle and Low Ordovician Ellenburger Groups, the Middle Ordovician Simpson Group, and the Middle to Upper Ordovician Viola Group.

Colorado, Kansas, Oklahoma, Texas↗

USGS2002

Bioavailability and toxicity of dietborne copper and zinc to fish

To date, most researchers have used dietborne metal concentrations rather than daily doses to define metal exposure and this has resulted in contradictory data within and between fish species. It has also resulted in the impression that high concentrations of dietborne Cu and Zn (e.g.>900 mg kg −1 dry diet) are relatively non-toxic to fish. We re-analyzed existing data using rations and dietborne metal concentrations and used daily dose, species and life stage to define the toxicity of dietborne Cu and Zn to fish. Partly because of insufficient information we were unable to find consistent relationships between metal toxicity in laboratory-prepared diets and any other factor including, supplemented metal compound (e.g. CuSO 4 or CuCl 2 ), duration of metal exposure, diet type (i.e. practical, purified or live diets), or water quality (flow rates, temperature, hardness, pH, alkalinity). For laboratory-prepared diets, dietborne Cu toxicity occurred at daily doses of >1 mg kg −1 body weight d −1 for channel catfish ( Ictalurus punctatus ), 1–15 mg kg −1 body weight d −1 (depending on life stage) for Atlantic salmon ( Salmo salar ) and 35–45 mg kg −1 body weight d −1 for rainbow trout ( Oncorhynchus mykiss ). We found that dietborne Zn toxicity has not yet been demonstrated in rainbow trout or turbot ( Scophthalmus maximus ) probably because these species have been exposed to relatively low doses of metal (<90 mg kg −1 body weight d −1 ) and effects on growth and reproduction have not been analyzed. However, daily doses of 9–12 mg Zn kg −1 body weight d −1 in laboratory-prepared diets were toxic to three other species, carp Cyprinus carpio , Nile tilapia Oreochromis niloticus , and guppy Poecilia reticulata . Limited research indicates that biological incorporation of Cu or Zn into a natural diet can either increase or decrease metal bioavailability, and the relationship between bioavailability and toxicity remains unclear. We have resolved the contradictory data surrounding the effect of organic chelation on metal bioavailability. Increased bioavailability of dietborne Cu and Zn is detectable when the metal is both organically chelated and provided in very low daily doses. We have summarized the information available on the effect of phosphates, phytate and calcium on dietborne Zn bioavailability. We also explored a rationale to understand the relative importance of exposure to waterborne or dietborne Cu and Zn with a view to finding an approach useful to regulatory agencies. Contrary to popular belief, the relative efficiency of Cu uptake from water and diet is very similar when daily doses are compared rather than Cu concentrations in each media. The ratio of dietborne dose:waterborne dose is a good discriminator of the relative importance of exposure to dietborne or waterborne Zn. We discuss gaps in existing data, suggest improvements for experimental design, and indicate directions for future research.

Comparative Biochemistry and Physiology, Part C: T↗

USGS2024

Fisheries research and monitoring activities of the Lake Erie Biological Station, 2023

This report presents biomass-based summaries of fish communities in western Lake Erie derived from USGS bottom trawl surveys conducted from 2013 to 2023. Analyses herein evaluated trends in total biomass, abundance of dominant predator and forage species, non-native species composition, biodiversity and community structure. Data from this effort can be explored interactively online and are accessible for download. Annual survey data are added to these sources as data become available.

Lake Erie↗

USGS2024

Seismic tomography 2023

Seismic tomography is the most abundant source of information about the internal structure of the Earth at scales ranging from a few meters to thousands of kilometers. It constrains the properties of active volcanoes, earthquake fault zones, deep reservoirs and storage sites, glaciers and ice sheets, or the entire globe. It contributes to outstanding societal problems related to natural hazards, resource exploration, underground storage, and many more. The recent advances in seismic tomography are being translated to nondestructive testing, medical ultrasound, and helioseismology. Nearly 50 yr after its first successful applications, this article offers a snapshot of modern seismic tomography. Focused on major challenges and particularly promising research directions, it is intended to guide both Earth science professionals and early‐career scientists. The individual contributions by the coauthors provide diverse perspectives on topics that may at first seem disconnected but are closely tied together by a few coherent threads: multiparameter inversion for properties related to dynamic processes, data quality, and geographic coverage, uncertainty quantification that is useful for geologic interpretation, new formulations of tomographic inverse problems that address concrete geologic questions more directly, and the presentation and quantitative comparison of tomographic models. It remains to be seen which of these problems will be considered solved, solved to some extent, or practically unsolvable over the next decade.

Bulletin of the Seismological Society of America↗

USGS2025

Environmental controls of suppressed fall crop productivity in an agrivoltaic solar array

Globally, agrivoltaics (AV) research has revealed how microclimates created by photovoltaic (PV) panels can be leveraged to promote reciprocal benefits for agricultural land use and PV energy generation. Yet, in regions of the United States where emissions reduction laws are likely to lead to greater PV development on croplands, empirical evaluation of such co-location remain under explored. Furthermore, the most common approach to AV in the United States is one that maximizes energy generation and secondarily accommodates for agricultural management, and the controls of crop production in facilities that employ such an approach are underrepresented in the AV literature. Here, we assessed the agronomic and physiological response of two vegetable crops (radish and radicchio) with different carbon allocation patterns (belowground and aboveground, respectively) in an energy focused AV facility during a fall growing season, in New York, United States. We found that a reduction in total irradiance (−24%) within the AV array decreased total biomass in both crop types (46% and 49%), with significant alterations to root-shoot ratios in radish. Reductions in total biomass were not a result of physiological acclimation, indicating that AV crops had similar photosynthetic capacity as control crops; however, the environmental constraints imposed by energy focused AV design (i.e. reduced irradiance) limited C uptake overall. Our findings highlight the need for novel management approaches (e.g. earlier planting of AV fall crops) to help overcome yield penalties incurred by energy focused AV designs.

New York↗

USGS2011

Probabilistic estimates of number of undiscovered deposits and their total tonnages in permissive tracts using deposit densities

Empirical evidence indicates that processes affecting number and quantity of resources in geologic settings are very general across deposit types. Sizes of permissive tracts that geologically could contain the deposits are excellent predictors of numbers of deposits. In addition, total ore tonnage of mineral deposits of a particular type in a tract is proportional to the type’s median tonnage in a tract. Regressions using size of permissive tracts and median tonnage allow estimation of number of deposits and of total tonnage of mineralization. These powerful estimators, based on 10 different deposit types from 109 permissive worldwide control tracts, generalize across deposit types. Estimates of number of deposits and of total tonnage of mineral deposits are made by regressing permissive area, and mean (in logs) tons in deposits of the type, against number of deposits and total tonnage of deposits in the tract for the 50th percentile estimates. The regression equations ( R 2 = 0.91 and 0.95) can be used for all deposit types just by inserting logarithmic values of permissive area in square kilometers, and mean tons in deposits in millions of metric tons. The regression equations provide estimates at the 50th percentile, and other equations are provided for 90% confidence limits for lower estimates and 10% confidence limits for upper estimates of number of deposits and total tonnage. Equations for these percentile estimates along with expected value estimates are presented here along with comparisons with independent expert estimates. Also provided are the equations for correcting for the known well-explored deposits in a tract. These deposit-density models require internally consistent grade and tonnage models and delineations for arriving at unbiased estimates.

Natural Resources Research↗

USGS1996

Analysis of nitrate in near-surface aquifers in the midcontinental United States: An application of the inverse hyperbolic sine Tobit model

A nonnormal and heteroscedastic Tobit model is used to determine the primary factors that affect nitrate concentrations in near-surface aquifers, using data from the U.S. Geological Survey collected in 1991. Both normality and homoscedasticity of errors are rejected, justifying the use of a nonnormal and heteroscedastic model. The following factors are found to have significant impacts on nitrate concentrations in groundwater: well screen interval, depth to top of aquifers, percentages of urban residential, forest land, and pasture within 3.2 km, dissolved oxygen concentration level, and presence of a chemical facility and feedlot. The effects of explanatory variables on nitrate concentration are explored further by calculating elasticities. Dissolved oxygen concentration level has more notable effects on nitrate concentrations in groundwater than other variables.

Water Resources Research↗

USGS2000

Geology and coastal hazards in the northern Monterey Bay, California: Field trip guidebook, November 4, 2000

The purpose of this field trip is to explore the relationships between local geology, coastal hazards, and human influences in the northern Monterey Bay, which is a tectonically active high wave energy coastal environment. Seacliffs, shore platforms, pocket beaches and a headland/embayment morphology characterize this rocky coastline. Many studies of the onshore and offshore geology and geophysics, the local wave climate, and the effects of large storm events and earthquakes on the coastline have been conducted in this region (see Related Reading section). This field trip summarizes many of the findings of these research investigations, and also considers the relationship between the rates and styles of seacliff erosion and the variations in the local geology. The field trip stops allow the participant to examine seacliff sites of different geological lithologies, geographic orientations, and varying protection from wave attack, and consider how these variables affect not only the rate or magnitude of seacliff retreat but also the styles of retreat. In general the two primary forcing factors in the retreat of seacliffs are marine and terrestrial processes. At the various field trip stops, the relative importance of these processes in shaping the coastline at that particular location will be explored. Where beaches have developed, whether naturally or by emplacement of man-made structures, field trip stops are designed to look at the occurrence of the beaches (why they exist where they do) and to understand the response of the beaches to large storm events. Finally, this trip focuses on the various coastline protection structures that have been built in the area, and their effectiveness in protecting development on the beaches or at the tops of the seacliffs. The first stop of the trip is the Long Marine Lab facility where the seacliffs are composed of the most resistant geological unit in the area, the Miocene Santa Cruz Mudstone. This stop also includes discussion of some of the interesting geological features associated with this part of the Bay, including the arches at Natural Bridges State Beach. The field trip stops are progressively east and south, moving into the inner Monterey Bay, as well as into the less resistant lithologies of the late Miocene to Pliocene Purisima Formation, and finally the Pleistocene Aromas Sand. The route will follow the coast wherever possible so participants can get a full perspective of the northern Monterey Bay coastline, even where stops have not been planned.

California↗

USGS2014

Tracking changes in volcanic systems with seismic Interferometry

The detection and evaluation of time-dependent changes at volcanoes form the foundation upon which successful volcano monitoring is built. Temporal changes at volcanoes occur over all time scales and may be obvious (e.g., earthquake swarms) or subtle (e.g., a slow, steady increase in the level of tremor). Some of the most challenging types of time-dependent change to detect are subtle variations in material properties beneath active volcanoes. Although difﬁcult to measure, such changes carry important information about stresses and ﬂuids present within hydrothermal and magmatic systems. These changes are imprinted on seismic waves that propagate through volcanoes. In recent years, there has been a quantum leap in the ability to detect subtle structural changes systematically at volcanoes with seismic waves. The new methodology is based on the idea that useful seismic signals can be generated “at will” from seismic noise. This means signals can be measured any time, in contrast to the often irregular and unpredictable times of earthquakes. With seismic noise in the frequency band 0.1–1 Hz arising from the interaction of the ocean with the solid Earth known as microseisms, researchers have demonstrated that cross-correlations of passive seismic recordings between pairs of seismometers yield coherent signals (Campillo and Paul 2003; Shapiro and Campillo 2004). Based on this principle, coherent signals have been reconstructed from noise recordings in such diverse ﬁelds as helioseismology (Rickett and Claerbout 2000), ultrasound (Weaver and Lobkis 2001), ocean acoustic waves (Roux and Kuperman 2004), regional (Shapiro et al. 2005; Sabra et al. 2005; Bensen et al. 2007) and exploration (Draganov et al. 2007) seismology, atmospheric infrasound (Haney 2009), and studies of the cryosphere (Marsan et al. 2012). Initial applications of ambient seismic noise were to regional surface wave tomography (Shapiro et al. 2005). Brenguier et al. (2007) were the ﬁrst to use ambient noise tomography (ANT) to map the 3D structure of a volcanic interior (at Piton de la Fournaise). Subsequent studies have imaged volcanoes with ANT at Okmok (Masterlark et al. 2010), Toba (Stankiewicz et al. 2010), Katmai (Thurber et al. 2012), Asama (Nagaoka et al. 2012), Uturuncu (Jay et al. 2012), and Kilauea (Ballmer et al. 2013b). In addition, Ma et al. (2013) have imaged a scatterer in the volcanic region of southern Peru by applying array techniques to ambient noise correlations. Prior to and in tandem with the development of ANT, researchers discovered that repeating earthquakes, which often occur at volcanoes, could be used to monitor subtle time-dependent changes with a technique known as the doublet method or coda wave interferometry (CWI) (Poupinet et al. 1984; Roberts et al. 1992; Ratdomopurbo and Poupinet 1995; Snieder et al. 2002; Pandolﬁ et al. 2006; Wegler et al. 2006; Martini et al. 2009; Haney et al. 2009; De Angelis 2009; Nagaoka et al. 2010; Battaglia et al. 2012; Erdem and Waite 2005; Hotovec-Ellis et al. 2014). Chaput et al. (2012) have also used scattered waves from Strombolian eruption coda at Erebus volcano to image the reﬂectivity of the volcanic interior with body wave interferometry. However, CWI in its original form was limited in that repeating earthquakes, or doublets, were not always guaranteed to occur. With the widespread use of noise correlations in seismology following the groundbreaking work by Campillo and Paul (2003) and Shapiro et al. (2005), it became evident that the nature of the ambient seismic ﬁeld, due to its oceanic origin, enabled the continuous monitoring of subtle, time-dependent changes at both fault zones (Wegler and Sens-Schönfelder 2007; Brenguier et al. 2008b; Wegler et al. 2009; Sawazaki et al. 2009; Tatagi et al. 2012) and volcanoes (Sens-Schönfelder and Wegler 2006; Brenguier et al. 2008a) without the need for repeating earthquakes. Seismic precursors to eruptions based on ambient noise we

Book chapter↗

USGS2009

Addressing foundational elements of regional land-use change forecasting

Regional land-use models must address several foundational elements, including understanding geographic setting, establishing regional land-use histories, modeling process and representing drivers of change, representing local land-use patterns, managing issues of scale and complexity, and development of scenarios. Key difficulties include managing an array of biophysical and socioeconomic processes across multiple spatial and temporal scales, and acquiring and utilizing empirical data to support the analysis of those processes. The Southeastern and Pacific Northwest regions of the United States, two heavily forested regions with significant forest industries, are examined in the context of these foundational elements. Geographic setting fundamentally affects both the primary land cover (forest) in the two regions, and the structure and form of land use (forestry). Land-use histories of the regions can be used to parameterize land-use models, validate model performance, and explore land-use scenarios. Drivers of change in the two regions are many and varied, with issues of scale and complexity posing significant challenges. Careful scenario development can be used to simplify process-based land-use models, and can improve our ability to address specific research questions. The successful modeling of land-use change in these two areas requires integration of both top-down and bottom-up drivers of change, using scenario frameworks to both guide and simplify the modeling process. Modular approaches, with utilization and integration of existing process models, allow regional land-use modelers the opportunity to better represent primary drivers of land-use change. However, availability of data to represent driving forces remains a primary obstacle.

Landscape Ecology↗

USGS2020

The method controls the story - Sampling method impacts on the detection of pore-water nitrogen concentrations in streambeds

Biogeochemical gradients in streambeds are steep and can vary over short distances often making adequate characterisation of sediment biogeochemical processes challenging. This paper provides an overview and comparison of streambed pore-water sampling methods, highlighting their capacity to address gaps in our understanding of streambed biogeochemical processes. This work reviews and critiques available pore-water sampling techniques to characterise streambed biogeochemical conditions, including their characteristic spatial and temporal resolutions, and associated advantages and limitations. A field study comparing three commonly-used pore-water sampling techniques (multilevel mini-piezometers, miniature drivepoint samplers and diffusive equilibrium in thin-film gels) was conducted to assess differences in observed nitrate and ammonium concentration profiles. Pore-water nitrate concentrations did not differ significantly between sampling methods ( p -value = 0.54) with mean concentrations of 2.53, 4.08 and 4.02 mg l − 1 observed with the multilevel mini-piezometers, miniature drivepoint samplers and diffusive equilibrium in thin-film gel samplers, respectively. Pore-water ammonium concentrations, however, were significantly higher in pore-water extracted by multilevel mini-piezometers (3.83 mg l − 1 ) and significantly lower where sampled with miniature drivepoint samplers (1.05 mg l − 1 , p -values <0.01). Differences in observed pore-water ammonium concentration profiles between active (suction: multilevel mini-piezometers) and passive (equilibrium; diffusive equilibrium in thin-film gels) samplers were further explored under laboratory conditions. Measured pore-water ammonium concentrations were significantly greater when sampled by diffusive equilibrium in thin-film gels than with multilevel mini-piezometers (all p -values ≤0.02). The findings of this study have critical implications for the interpretation of field-based research on hyporheic zone biogeochemical cycling and highlight the need for more systematic testing of sampling protocols. For the first time, the impact of different active and passive pore-water sampling methods is addressed systematically here, highlighting to what degree the choice of pore-water sampling methods affects research outcomes, with relevance for the interpretation of previously published work as well as future studies.

Science of the Total Environment↗

USGS2011

Workshop discusses community models for coastal sediment transport

Numerical models of coastal sediment transport are increasingly used to address problems ranging from remediation of contaminated sediments, to siting of sewage outfalls and disposal sites, to evaluating impacts of coastal development. They are also used as a test bed for sediment-transport algorithms, to provide realistic settings for biological and geochemical models, and for a variety of other research, both fundamental and applied. However, there are few full-featured, publicly available coastal sediment-transport models, and fewer still that are well tested and have been widely applied. This was the motivation for a workshop in Woods Hole, Massachusetts, on June 22–23, 2000, that explored the establishment of community models for coastal sediment-transport processes.

Eos Science News↗

USGS2011

Evaluation of landslide monitoring in the Polish Carpathians

In response to the June 15, 2010 request from the Polish Geological Institute (PGI) to the U.S. Geological Survey (USGS) for assistance and advice regarding real-time landslide monitoring, landslide specialists from the USGS Landslide Hazard Program visited PGI headquarters and field sites in September 2010. During our visit we became familiar with characteristics of landslides in the Polish Carpathians, reviewed PGI monitoring techniques, and assessed needs for monitoring at recently activated landslides. Visits to several landslides that are monitored by PGI (the Just, Hańczowa, Szymbark, Siercza and Łasńica landslides) revealed that current data collection (monthly GPS and inclinometer surveys, hourly piezometers readings) is generally sufficient for collecting basic information about landslide displacement, depth, and groundwater conditions. Large landslides are typically hydrologically complex, and we would expect such complexity in Carpathian landslides, given the alternating shale and sandstone stratigraphy and complex geologic structures of the flysch bedrock. Consequently groundwater observations could be improved by installing several piezometers that sample the basal shear zone of each landslide being monitored by PGI. These could be supplemented by additional piezometers at shallower depths to help clarify general flow directions and hydraulic gradients. Remedial works at Hańczowa make the landslide unsuitable for monitoring as part of an early warning network. Monitoring there should focus on continued performance of the remedial works. Our suggestions for new monitoring at recently activated landslides are summarized in table 1. Displacement monitoring using extensometers and (or) GPS is a high priority at Kłodne, Łaśnica, Łazki, and Siedloki. Geomorphologic mapping of active surface features (scarps, cracks, shear zones, folds, and thrusts) in sufficient detail to reveal the kinematics of each landslide would greatly help in planning subsurface exploration and monitoring. Mapping should take advantage of existing and future airborne lidar data sets of specific areas, where available. Borehole inclinometers and piezometers would complete the basic monitoring package for these landslides. The landslide at Kłodne may be well suited for more detailed monitoring for landslide process research, although research opportunities exist at the other landslides as well. The landslide near Siedloki may be a good candidate for terrestrial laser scanning (TLS). Tandem streamflow gages upstream and downstream from the Siedloki landslide, or laser distance meters to monitor advancement of the toe, may be needed to provide warning of stream blockage of Potok Milowski. A real-time warning system specifically for the Łazki landslide might be considered due to potential concerns about catastrophic movement into Międzybrodzie Reservoir. Challenges associated with the establishment of a complete real-time monitoring and early warning system are far greater than just the technical and logistical aspects of installing remote monitoring systems at a large number of landslides. Long-term maintenance of a landslide monitoring network will involve considerable effort and expense as sensors break-down from exposure to weather, landslide movement, and harsh underground environmental conditions. Once PGI’s planned pilot network of 10-20 monitored landslides is operating, a period of observation and analysis will be needed to establish appropriate alert levels and criteria for issuing alerts and warnings. Simultaneously, discussions with authorities will be needed to develop action plans for responding to landslide notifications and (or) warnings. Public resistance to landslide warnings and mandated evacuations may be high given the low historical incidence of fatalities and injuries resulting from Carpathian landslides and the small potential for warnings to reduce landslide damage to homes and land. Careful weighing of purpose, advantages, and costs of a large-scale monitoring and early warning program is needed early in the planning process and should be revisited regularly throughout pilot and final implementation. In this report, we present a generic plan for monitoring of a hypothetical Carpathian landslide that illustrates how our suggestions for each of the specific landslides could be implemented. The plan includes basic pore pressure, displacement, and weather monitoring, along with supplemental monitoring for special conditions at specific landslides. Table 2 summarizes the overall approach and basic equipment and software requirements.

Open-File Report↗

USGS2023

One byte at a time: Gathering best practices, guidelines, and resources for data standards to support ocean exploration and characterization

Initiated through Presidential direction and now codified, the National Ocean Mapping, Exploration, and Characterization (NOMEC) Council comprises leaders from U.S. federal agencies with a shared goal of mapping all waters of the United States and exploring and characterizing priority areas. The NOMEC Council’s two Interagency Working Groups, Ocean and Coastal Mapping (IWG-OCM) and Ocean Exploration and Characterization (IWG-OEC), both achieved major milestones recently with the 2023 release of the Draft Standard Ocean Mapping Protocols (SOMP) and the 2022 publication of the National Priorities for Ocean Exploration and Characterization. Building on this groundwork, the IWG-OEC is now looking to define and share best practices, guidelines, and resources for ocean exploration and characterization with the long-term goal of increasing community wide standardization to help achieve consistent common practices. First, the IWG-OEC plans to compile federal agency resources and share them in a newly developed online resource repository. The next phase is for the IWG-OEC to create opportunities for non-federal sectors to provide input on developing and populating this repository with additional content (existing standards and protocols, best practice and guidelines documents, etc.). After experts representing multiple sectors are identified, a series of results-oriented workshops are planned to provide input on all aspects of the data, products, and services from exploration and characterization. Finally, the IWG-OEC plans to widely share the online repository of best practices and standard operating procedures. A systematic, transparent, and collaborative process to share standards and protocols can help to enhance the interoperability of data and inform new lines of inquiry, discovery, research, and innovation.

Frontiers in Marine Science↗