SEARCH · Geology Reports

Results for “Journal of Morphology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

503 records · Page 28Linked to original sources

USGS2017

Unraveling the channel–lobe transition zone with high-resolution AUV bathymetry: Navy Fan, offshore Baja California, Mexico

Ultra-high-resolution (1 m * 1 m * 0.25 m) bathymetry was acquired with an autonomous underwater vehicle (AUV) over a sector of the Navy Fan offshore Baja California. The survey specifically targeted an area where the former interpretation of the fan showed a channel–lobe transition; however, the lobe and the transition were not recognized. Instead, the newly acquired bathymetry shows that the previously identified channel continues basinward changing its overall morphology and stratigraphic architecture, becoming gradually but significantly wider (650–1000 m) and of lower relief (3–4 m). Cores from the channel thalweg recovered mud-poor (< 5%) well-sorted sands, interpreted as deposited by fully turbulent flows. The cores also show several mud-rich (9–18%) poorly sorted sands, probably indicating deposition from more cohesive flows. The high-resolution bathymetry shows large sectors of the seafloor sculpted by elaborate bedforms and scours. The overbank area north of the channel exhibits the most numerous and prominent scours, interpreted to have been largely generated by flow stripping at a bend in the channel. Along high-gradient sectors (more than approximately 1¯) of this area, the scours are largest and deepest. Some of these scours show an erosional headwall and a distal upflow-dipping depositional bulge, forming repetitive bedforms interpreted as erosional cyclic steps associated with locked-in-place trains of hydraulic jumps. The scours seem to coalesce to form an incipient channel, which would likely drive the avulsion of the main channel. Further basinward, average gradients decrease (< 0.6¯ ) and scours become smaller and less deep suggesting a gradient control on erosion. The southern channel margin and adjacent overbank area exhibit a trend of scours that are elongated transverse to flow, that successively repeat themselves basinwards, and that at times merge with sediment waves. Probably these scours are genetically linked to sediment waves, and they may have been formed by cyclic-step-like processes as well. The acquired bathymetry represents a breakthrough in the imaging of the proximal sectors of deep-sea fans, which provides the basis for an accurate morphometric characterization and the understanding of sedimentary processes and morphodynamics associated with the delivery of sediment into the deep sea.

Baja California↗

USGS1999

Debris-flow origin for the Simud/Tiu deposit on Mars

A late Hesperian smooth plains deposit on Mars interpreted as a debris flow extends more than 2000 km from Hydraotes Chaos, through Simud and Tiu Valles, and into Chryse Planitia. The Simud/Tiu deposit widens out to >1000 km and embays streamlined landforms and knobs made up of sedimentary and perhaps volcanic deposits that were carved by earlier channeling activity. Morphologic features of the Simud/Tiu deposit observed in Viking and Pathfinder images are generally consistent with a debris-flow origin, but some of the deposit's salient features are not readily explained by catastrophic flooding or ice flow. Internal depressions appear to be bounded by linear scarps along flow margins where differential shearing may have occurred and in areas where flow spreading may have produced zones of extensional breakup and thinning within the flow. Possible flow lobes within the deposit may have formed by successive flow surges within the flow unit. The Pathfinder landing site is on the Simud/Tiu deposit, and the observations there are consistent with debris flow. The low, longitudinal ridges at the site may have formed by clast interactions as the flow ground to a halt. Imbricated, planar rocks on the ridges, such as in the Rock Garden, also may have been emplaced by debris or ice flow. However, stream energy calculations at Ares Vallis and channel geology indicate that flooding probably was incapable of emplacing the meter-size boulders observed at the Pathfinder site. Dewatering of pressurized zones in the debris flow or underlying material may be responsible for mud eruptions that formed a couple of patches of low pancakelike shields up to 5 km in diameter and for probable water flows that formed two small rille channels a few kilometers long. Local irregular grooves may be cracks that resulted from later desiccation and contraction of the flow material. The debris-flow unit apparently coalesced from outflows of water-fluidized debris originating from beneath chaotic and hummocky terrains within and along the margins of Simud and Tiu Valles. The deposit is onlapped from the north by another flow deposit originating from Acidalia Planitia. If the Simud/Tiu debris flow had entered a standing body of water, a turbidity current may have arisen from the debris flow and then backflowed over the debris flow to account for the Acidalia deposit.

Journal of Geophysical Research E: Planets↗

USGS2007

Variation in salinity tolerance, gill Na+/K+-ATPase, Na+/K+/2Cl– cotransporter and mitochondria-rich cell distribution in three salmonids Salvelinus namaycush, Salvelinus fontinalis and Salmo salar

We compared seawater tolerance, gill Na + /K + -ATPase and Na + /K + /2Cl – cotransporter (NKCC) abundance, and mitochondria-rich cell (MRC) morphology of three salmonids, lake trout Salvelinus namaycush , brook trout Salvelinus fontinalis and Atlantic salmon Salmo salar . They were transferred directly from 0 p.p.t. (parts per thousand; freshwater) to 30 p.p.t. seawater, or transferred gradually from 0 to 10, 20 and 30 p.p.t. at 1-week intervals and kept in 30 p.p.t. for 3 weeks. The survival rates of lake trout, brook trout and Atlantic salmon were 80%, 50% and 100% following direct transfer, and 80%, 100% and 100% during gradual transfer, respectively. Plasma Na + , K + and Cl – concentrations in surviving lake trout increased rapidly and remained at high levels in 30 p.p.t. of both direct and gradual transfer, whereas those in brook trout showed a transient increase following direct transfer but did not change significantly during gradual transfer. Only minor changes in plasma ions were observed in Atlantic salmon smolts in both direct and gradual transfer. These results suggest that lake trout retains some degree of euryhalinity and that brook trout possesses intermediate euryhalinity between lake trout and Atlantic salmon smolts. Gill Na + /K + -ATPase activity of lake trout and brook trout increased in seawater, whereas that of Atlantic salmon smolts was already upregulated in freshwater and remained high after seawater exposure. NKCC abundance was upregulated in parallel with gill Na + /K + -ATPase activity in each species. Immunocytochemistry with anti-Na + /K + -ATPaseα -subunit and anti-NKCC revealed that the two ion transporters were colocalized on the basolateral membrane of gill MRCs. Immunopositive MRCs were distributed on both primary filaments and secondary lamellae in all three species kept in freshwater; following transfer to seawater this pattern did not change in lake trout and brook trout but lamellar MRCs disappeared in Atlantic salmon. Previous studies on several teleost species have suggested that filament and lamellar MRCs would be involved in seawater and freshwater acclimation, respectively. However, our results in lake trout and brook trout suggest that lamellar MRCs could be also functional during seawater acclimation.

Journal of Experimental Biology↗

USGS2000

Sedimentary petrology of a declining reef ecosystem, Florida reef tract (U.S.A.)

Petrologic evaluation of biogenic sediments collected shelf-wide along the Florida reef tract in 1989 revealed three principal components: coral, the calcareous green alga Halimeda, and mollusc. The dominant grain was dependent in part upon local morphology that controlled composition and vitality of the biota. Either Halimeda or mollusc grains prevailed in sands off the upper Keys. In the middle and lower Keys, Halimeda grains prevailed nearshore and coral grains offshore. Comparison with similar analyses of samples collected in 1952 and 1963 indicates that, over 37 years, the relative abundance of molluscan grains more than doubled in the upper Keys and that of particulate coral tripled in the middle Keys. These changes can be interpreted in the context of physical and biological events that affected Florida Keys reefs over that period of time. In the 1970s, outbreaks of extremely cold water killed even representatives of the hardiest coral species. In the 1980s, black-band and white-band diseases decimated the major reef-building acroporid corals, and the pivotal herbivore, Diadema antillarum, disappeared. Although Diadema is a major coral bioeroder, the sea urchin is also essential to healthy reef growth. The increase in coral debris in the middle Keys may be related to Hurricane Donna in 1960, but it is also consistent with the prediction of accelerated bioerosion by boring organisms in response to increased plankton productivity. Plankton productivity is stimulated by nutrients from Florida Bay and by well-documented eutrophication of nearshore environments. In the upper Keys, where reefs are somewhat removed from bay and nearshore influence, a relative decrease in coral debris over the 37 years may reflect proliferation of algae and algae-grazing molluscs as well as suppressed rates of bioerosion in the absence of Diadema. Human activities have substantially increased the natural flux of fixed nitrogen to coastal systems worldwide. Waters in the Florida Keys are no exception. Spatial and temporal trends in sediment constituents are compared to a previously published model that predicts the response of benthic biota to changes in nutrient supply. As adapted to interpret changes observed in reef-tract sediments, the model provides insights into the natural nutrient gradient along the Florida reef tract.

Journal of Coastal Research↗

USGS2020

Wildfire reveals transient changes to individual traits and population responses of a native bumble bee ( Bombus vosnesenskii )

1. Fire-induced changes in the abundance and distribution of organisms, especially plants, can alter resource landscapes for mobile consumers driving bottom-up effects on their population sizes, morphologies, and reproductive potential. We expect these impacts to be most striking for obligate visitors of plants, like bees and other pollinators, but these impacts can be difficult to interpret due to the limited information provided by forager counts in the absence of survival or fitness proxies. 2. Increased bumble bee worker abundance is often coincident with the pulses of flowers that follow recent fire. However, it is unknown if observed postfire activity is due to underlying population growth or a stable pool of colonies recruiting more foragers to abundant resource patches. This distinction is necessary for determining the net impact of disturbance on bumble bees: are there population-wide responses or do just a few colonies reap the rewards? 3. We estimated colony abundance before and after fire in burned and unburned areas using a genetic mark-recapture framework. We paired colony abundance estimates with measures of body size, counts of queens, and estimates of foraging and dispersal to assess changes in worker size, reproductive output, and landscape-scale movements. 4. Higher floral abundance following fire not only increased forager abundance, but also the number of colonies from which those foragers came. Importantly, despite a larger population size we also observed increased mean worker size. Two years following fire, queen abundance was higher in both burned and unburned sites, potentially due to the dispersal of queens from burned into unburned areas. The effects of fire were transient; within two growing seasons, worker abundance was substantially reduced across the entire sampling area and body sizes were similar between burned and unburned sites. 5. Our results reveal how disturbance can temporarily release populations from resource limitation, boosting the genetic diversity, body size, and reproductive output of populations. Given that the effects of fire on bumble bees acted indirectly through pulsed resource availability, it is likely our results are generalizable to other situations, such as habitat restorations, where resource density is enhanced within the landscape.

California↗

USGS2003

Mars Exploration Rover Athena Panoramic Camera (Pancam) investigation

The Panoramic Camera (Pancam) investigation is part of the Athena science payload launched to Mars in 2003 on NASA's twin Mars Exploration Rover (MER) missions. The scientific goals of the Pancam investigation are to assess the high‐resolution morphology, topography, and geologic context of each MER landing site, to obtain color images to constrain the mineralogic, photometric, and physical properties of surface materials, and to determine dust and aerosol opacity and physical properties from direct imaging of the Sun and sky. Pancam also provides mission support measurements for the rovers, including Sun‐finding for rover navigation, hazard identification and digital terrain modeling to help guide long‐term rover traverse decisions, high‐resolution imaging to help guide the selection of in situ sampling targets, and acquisition of education and public outreach products. The Pancam optical, mechanical, and electronics design were optimized to achieve these science and mission support goals. Pancam is a multispectral, stereoscopic, panoramic imaging system consisting of two digital cameras mounted on a mast 1.5 m above the Martian surface. The mast allows Pancam to image the full 360° in azimuth and ±90° in elevation. Each Pancam camera utilizes a 1024 × 1024 active imaging area frame transfer CCD detector array. The Pancam optics have an effective focal length of 43 mm and a focal ratio of f /20, yielding an instantaneous field of view of 0.27 mrad/pixel and a field of view of 16° × 16°. Each rover's two Pancam “eyes” are separated by 30 cm and have a 1° toe‐in to provide adequate stereo parallax. Each eye also includes a small eight position filter wheel to allow surface mineralogic studies, multispectral sky imaging, and direct Sun imaging in the 400–1100 nm wavelength region. Pancam was designed and calibrated to operate within specifications on Mars at temperatures from −55° to +5°C. An onboard calibration target and fiducial marks provide the capability to validate the radiometric and geometric calibration on Mars.

Journal of Geophysical Research E: Planets↗

USGS2012

The geology and distribution of impact craters on Venus: What are they telling us?

Magellan has revealed an ensemble of impact craters on Venus that is unique in many important ways. We have compiled a data base describing the 842 craters on 89% of Venus' surface mapped through orbit 2578. (The craters range in diameter from 1.5 to 280 km.) We have studied the distribution, size‐density, morphology, geology, and associated surface properties of these craters both in the aggregate and, for some craters, in greater detail. We find that (1) the spatial distribution of craters is highly uniform; (2) the size‐density distribution of large craters (diameters ≥35 km) is similar to the young crater populations on other terrestrial planets but at a much lower density that indicates an average age of only about 0.5 Ga (based on the estimated population of Venus‐crossing asteroids); (3) unlike the case on other planets, the density of small craters (diameters ≤35 km) declines rapidly with decreasing diameters because of atmospheric filtering; (4) the spectrum of crater modification differs greatly from that on other planets: 62% of all craters are pristine, only 4% are embayed by lavas, and the remainder are affected by tectonism, but none are severely and progressively depleted (as extrapolated from the size‐density distribution of larger craters); (5) large craters have a progression of morphologies generally similar to those on other planets, but small craters are typically irregular or multiple rather than bowl shaped; (6) diffuse radar‐bright or ‐dark features surround some craters, and 367 similar diffuse “splotches” with no central crater are observed; and (7) other crater features unique to Venus include radar‐bright or ‐dark parabolic arcs opening westward and extensive outflows originating in crater ejecta. The first three of these observations are entirely unexpected. We interpret them as indicating that the planet's cratering record was erased by a global resurfacing event or events, the latest ending about 0.5 Ga, after which volcanic activity declined (but did not cease entirely). Since the last resurfacing event, a maximum of 10% of the planet has been resurfaced and only about 4% of the craters have been obliterated. Convective thermal evolution models support this interpretation (Arkani‐Hamed and Toksoz, 1984). Observations 3–7 confirm quantitatively the expectation that the dense atmosphere of Venus has strongly affected the production of craters. Large impactors have been relatively unaffected, intermediate‐sized ones have been fragmented and have produced overlapping or multiple craters, a narrow size range has produced shock‐induced “splotches” but no craters, and the smallest bodies have had no observable effect on the surface. The number of craters eliminated by the “atmospheric filter” is enormous, about 98% of the craters between 2 and 35 km in diameter that Magellan might have observed on a hypothetical airless Venus. Unique crater‐related features such as parabolas and outflow deposits demonstrate the roles of Venus' high atmospheric density and temperature in modifying the crater formation process. Finally, heavily fractured craters and lava‐embayed craters are found to have higher than average densities along the major fracture belts and rifted uplands connecting Aphrodite Terra and Atla, Beta, Themis, and Phoebe regiones. These craters thus provide physical evidence for recent volcanic and tectonic activity at a low level.

Journal of Geophysical Research E: Planets↗

USGS1999

Overview of the Mars Pathfinder Mission: Launch through landing, surface operations, data sets, and science results

Mars Pathfinder successfully landed at Ares Vallis on July 4, 1997, deployed and navigated a small rover about 100 m clockwise around the lander, and collected data from three science instruments and ten technology experiments. The mission operated for three months and returned 2.3 Gbits of data, including over 16,500 lander and 550 rover images, 16 chemical analyses of rocks and soil, and 8.5 million individual temperature, pressure and wind measurements. Path‐finder is the best known location on Mars, having been clearly identified with respect to other features on the surface by correlating five prominent horizon features and two small craters in lander images with those in high‐resolution orbiter images and in inertial space from two‐way ranging and Doppler tracking. Tracking of the lander has fixed the spin pole of Mars, determined the precession rate since Viking 20 years ago, and indicates a polar moment of inertia, which constrains a central metallic core to be between 1300 and ∼2000 km in radius. Dark rocks appear to be high in silica and geochemically similar to anorogenic andesites; lighter rocks are richer in sulfur and lower in silica, consistent with being coated with various amounts of dust. Rover and lander images show rocks with a variety of morphologies, fabrics and textures, suggesting a variety of rock types are present. Rounded pebbles and cobbles on the surface as well as rounded bumps and pits on some rocks indicate these rocks may be conglomerates (although other explanations are also possible), which almost definitely require liquid water to form and a warmer and wetter past. Air‐borne dust is composed of composite silicate particles with a small fraction of a highly magnetic mineral, interpreted to be most likely maghemite; explanations suggest iron was dissolved from crustal materials during an active hydrologic cycle with maghemite freeze dried onto silicate dust grains. Remote sensing data at a scale of a kilometer or greater and an Earth analog correctly predicted a rocky plain safe for landing and roving with a variety of rocks deposited by catstrophic floods, which are relatively dust free. The surface appears to have changed little since it formed billions of years ago, with the exception that eolian activity may have deflated the surface by ∼3–7 cm, sculpted wind tails, collected sand into dunes, and eroded ventifacts (fluted and grooved rocks). Pathfinder found a dusty lower atmosphere, early morning water ice clouds, and morning near‐surface air temperatures that changed abruptly with time and height. Small scale vortices, interpreted to be dust devils, were observed repeatedly in the afternoon by the meteorology instruments and have been imaged.

Journal of Geophysical Research E: Planets↗

USGS2012

Morphology and growth history of Delgada Fan: Implications for the Neogene evolution of Point Arena Basin and the Mendocino Triple Junction

Long-range side scan (GLORIA) sonographs and seismic reflection data acquired during a survey of the western U.S. Exclusive Economic Zone in 1984, coupled with information from Deep Sea Drilling Project sites, provide new insights into the growth and evolution of the Delgada Fan. Construction of the fan commenced in the latest Miocene (∼6 Ma) following the filling of the Neogene Point Arena Basin. The fan presently covers more than 50×10 3 km 2 of the Pacific plate and contains approximately 15×10 3 km 3 of predominantly terrigenous detritus. The large size of the fan is incompatible with the small present-day supply of sediment to the canyon system. The GLORIA data show the Delgada Fan to be a hybrid-type fan, exhibiting characteristics of both elongate and radial fans. The morphology and volume of the fan, along with evidence for a decline in accumulation rates on the lower fan during the Quaternary period, suggest that the fan experienced an early growth phase (latest Miocene and Pliocene) characterized by relatively rapid progradation of elongate fan lobes followed by a period (Quaternary) of slower growth that has featured a shift of depocenters to sites closer to the canyons and a transition to distributary channels bordered by less prominent levees and overbank deposits. We examine the growth of Delgada Fan in relation to the Neogene evolution of the North American-Pacific plate boundary using a series of paleogeographic reconstructions based on recently published time displacement histories of the Mendocino triple junction (MTJ), the San Andreas fault (SAF), and the Pacific plate, upon which the fan rests. The time displacement curves for the SAF and the MTJ suggest that the MTJ and Mendocino Fracture Zone overtook and passed Point Arena Basin at about 10 Ma when the basin lay immediately southwest of the present San Francisco Bay area. We suggest that the MTJ joined the SAF at approximately that time and location, thus making the SAF the master fault in the transform system. This interpretation is compatible with evidence from seismic reflection profiles over the fan, which demonstrate that the fan and the canyon system and therefore Point Arena Basin have moved as a unit since the inception of fan growth (∼6–7 Ma). Point Arena Basin lay southwest of the San Francisco area at 10–12 Ma, and the passage of the MTJ caused the disruption of the forearc shelf and slope and the development of local uplifted and subsiding blocks. In particular, uplift of the “bay block” immediately east of the SAF may have provided the source area for the late Miocene sediments that filled Point Arena Basin and set the stage for the growth of Delgada Canyon and Fan system. The growth rate of the fan has decreased, and the style of deposition has changed as the system was tectonically transported to its present location adjacent to the small youthful drainages of the King Range.

Journal of Geophysical Research Solid Earth↗

USGS2019

Monitoring, forecasting collapse events, and mapping pyroclastic deposits at Sinabung volcano with satellite imagery

During the ongoing (2013–present) eruption of Sinabung volcano, north Sumatra, we have routinely used a variety of satellite remote sensing data to observe and forecast lava dome and lava flow collapse events, to map the resulting pyroclastic deposits, and to estimate effusion rates. In this paper, we focus on the first two years of the current eruption (September 2013–December 2015), and we summarize major events in 2016. We divide the eruption into 5 major phases: 1) phreatomagmatic (July 2013–18 December 2013), 2) first dome growth and collapse (18 December 2013–10 January 2014), 3) lava-flow (10 January 2014–mid-September 2014), 4) second lava dome and collapse (mid-September 2014–July 2015), 5) lava dome collapse and ash explosion phase (August 2015–present). Throughout the eruption, remotely sensed information has been instrumental in assessing the stability of the lava dome and flow and to forecast collapse events that produce pyroclastic density currents (PDCs: block-and-ash flows, co-ignimbrite surges, and blasts). Forecasts based on remote sensing data in combination with seismic, geodetic and gas-monitoring data have also helped inform decisions related to alert levels and evacuations. Relatively unusual aspects of the Sinabung eruption include the transition from dome to flow morphology (phase 2 to phase 3 transition) and the frequent occurrence during phase 3 of collapses from the lava flow-front and flow-margins—collapses that produced extensive pyroclastic density currents. By analogy to the well-known “Merapi type” collapses and pyroclastic deposits, we propose that lava flow-front and flow-margin collapses with associated PDCs be known as “Sinabung type.” Although detailed study of deposits has not been possible due to continuing hazards, our observations suggest that the transition from lava dome to lava flow and the occurrence of flow-front and flow-margin collapses reflect a particular combination of lava viscosity and steepness of slope. Our observations also show clear evidence of at least one slope-parallel high-velocity and dilute PDC (a “blast”) that emanated from a lava-margin collapse site 500 m downslope from the vent. This 1 February 2014 blast downed and singed a forest out to at least 3.9 km from the collapse site and killed 16 people. We also use a combination of field and remotely sensed data to map the distribution of Sinabung deposits. We estimate eruptive volumes and extrusion rates by combining sequential measurements of lava surface and pyroclastic flow areas with thickness estimates derived from simple geometric assumptions, oblique photographs and Digital Elevation Models (DEMs) derived from remotely sensed data. Our estimates of short-term effusion rates vary widely on a daily to weekly basis, from <1 to >20 m 3 s −1 . In a few cases, periods of increased extrusion precede lava flow-front collapses by a few days to a week, suggesting delays in transmittance of effusion pulses as lava moves from vent to flow front. We find that, as of 1 January 2016, the total area of deposits is 10 7 m 2 , and their approximate deposit volume is about 0.3 km 3 , equivalent to 0.2 km 3 Dense Rock Equivalent (DRE). We anticipate that our deposit maps will be valuable in the future as a framework for the study of the magmatic and textural evolution of eruptive products through time.

Sinabung volcano↗

USGS2020

Coming of age: Morphometric variation in the hand skeletons of juvenile and adult Lesser Treeshrews (Scandentia: Tupaiidae: Tupaia minor Günther, 1876)

Morphometric analyses of the manus skeleton have proven useful in understanding species limits and morphological divergence among tupaiid treeshrews (Scandentia: Tupaiidae). Specimens in these studies are typically limited to mature individuals with fully erupted permanent dentition, which eliminates potentially confounding variation attributable to age, but can also exclude rare taxa and small island populations that are poorly represented in systematic collections. To determine the real limits associated with including immature animals in such studies, we used multivariate analyses to study sexual and age variation of the manus skeleton within two allopatric populations of the Lesser Treeshrew (Tupaia minor Günther, 1876) from the Malay Peninsula and from Borneo that we treated as separate samples. Individuals were aged using dental eruption of the permanent dentition. We also recorded the degree of epiphyseal fusion of the bones of the manus based on x-rays of study skins. We then tested our ability to distinguish the two populations using a series of discriminant function analyses of hand measurements from samples that included varying proportions of immature individuals and adults. We found no evidence of sexual dimorphism in hand proportions, permitting us to combine females and males in our samples. Epiphyseal fusion of the metacarpals and phalanges typically occurs by the time the third molars have completely erupted, and fusion of the distal epiphyses of the radius and ulna typically occurs by the time the permanent fourth premolars are in place. There is occasional asynchrony between dental age and epiphyseal fusion. In both populations, the hands of most infants and subadults provide morphometric values within the range of variation of adults, although they are typically distributed in the lower part of the adult range and have the potential to bias the sample toward lower mean size. The inclusion of infants and subadults when attempting to discriminate between two taxa generally results in lower rates of correct classifications, although the rates increase as the sample of immature individuals is limited to older subadults. As a general rule, we recommend that infants and subadults continue to be excluded from analyses when exploring taxonomic boundaries among treeshrews. In cases of extremely small sample sizes of adults, however, older subadults—in which the permanent third premolars are erupting or in place—can be used with appropriate caution.

Journal of Mammalogy↗

USGS2024

The influence of vesicularity on grain morphology in basaltic pyroclasts from Mauna Loa and Kīlauea volcanoes

Vesicularity of individual pyroclasts from airfall tephra deposits is an important parameter that is commonly measured at basaltic volcanoes. Conventional methods used to determine pyroclast vesicularity on a large number of clasts has the potential to be time consuming, particularly when rapid analysis is required. Here we propose dynamic image analysis on two-dimensional (2D) projection shapes of crushed pyroclasts from tephra deposits as a new method to estimate vesicularity. This method relies on the influence of vesicles and uses grain morphology as a proxy for vesicle size and abundance. Pyroclasts from a variety of basaltic tephra deposits from the volcanoes of Mauna Loa and Kīlauea were analyzed. Vesicularities between 52–98% were measured via nitrogen-gas pycnometry. The same pyroclasts were then crushed and sieved, and their grain shapes measured using dynamic image analysis on a CAMSIZER®. This yields values for the mean sphericity, elongation, compactness, and Krumbein roundness of the grains. Our data show that grains become increasingly irregular with increasing vesicularity, with the degree of correlation between shape parameters and vesicularity depending on the size of measured grains. Shape irregularities in small grains (60–250 µm) are mostly area-based, with elongation being the best vesicularity indicator, whereas shape irregularities in large grains (250–700 µm) are mostly perimeter-based, with Krumbein roundness as the best vesicularity indicator. Using mean shape parameter values with all grain sizes included, grain elongation is the most well-correlated shape parameter with vesicularity, with the best fitted model explaining 76% of variation in the observations. Microscope images of thin sections of intact pyroclasts, as well as from crushed pyroclasts, were analyzed using CSDCorrections 1.6 software in ImageJ to find local vesicularity, vesicle size, grain size, grain elongation, and vesicle spatial distribution by stereological conversion. Observed correlation between grain shape and vesicularity can be explained by the local effect of vesicles on the shape of the solid structure in between those vesicles. Grain shape depends not only on vesicularity, but also on vesicle to grain size ratio and the spatial distribution of vesicles. The influence of vesicles on grain shape is best captured by grains with the size of the solid structure in between vesicles, which generally increases with decreasing vesicularity. Dynamic image analysis is a useful tool to quickly gauge vesicularity, which could be used in near-real-time during an eruption response. However, this method is best suited for highly vesicular (> 80%) basaltic pyroclasts from tephra deposits with few microlites and phenocrysts. Further research on crushing techniques, optimum grain size for shape measurements, and Krumbein roundness measurements for the grain size range of 250–700 µm might enable application of this method to lower vesicularity pyroclasts.

Hawaii↗

USGS2012

Impact crater outflows on Venus: Morphology and emplacement mechanisms

Many of the 932 impact craters discovered by the Magellan spacecraft at Venus are associated with lobate flows that originate at or near the crater rim. They extend for several to several hundred kilometers from the crater, and they commonly have a strong radar backscatter. A morphologic study of all identifiable crater outflows on Venus has revealed that many individual flows each consist of two areas, defined by distinct morphologic features. These two areas appear to represent two stages of deposition for each flow. The part of the flow that is generally deposited closest to the crater tends to be on the downrange side of the crater, flows in the downrange direction, and it is interpreted to be a late-stage ejecta. In many cases, this proximal part of the flow is too thin to completely bury the large blocks in subjacent ejecta deposits. Dendritic channels, present in many proximal flows, appear to have drained liquid from the proximal part in the downhill direction, and they debouch to feed the outer part of the flows. This distal part flows downhill, fills small grabens, and is ponded by ridges, behavior that mimics that of volcanic lava flows. The meandering and dendritic channels and the relation of the distal flows to topography strongly suggest that the distal portion is the result of coalescence and slow drainage of impact melt from the proximal portion. Impact melt forms a lining to the transient crater and mixes turbulently with solid clasts, and part of this mixture may be ejected to form the proximal part of the flow during the excavation stage of crater development. A statistical study of the Venusian craters has revealed that, in general, large craters produced by impacts with relatively low incidence angles to the surface are more likely to produce flows than small craters produced by higher-angle impacts. The greater flow production and downrange focusing of the proximal flows with decreasing incidence angle indicate a strong control of the flows by the impactor flight direction, and a high downrange velocity imparted to the proximal flow material in lower angle impacts. On the Moon, small flows interpreted to be composed of impact melt are observed atop the ejecta of large, fresh craters; on Earth, melt-rich suevite deposits form the uppermost layer of ejecta of some fresh craters. These features, albeit much smaller, may be analogous to the flows on Venus. Numerical models have predicted that larger volumes of impact melt would be produced on Venus than on the cooler terrestrial bodies due to high atmospheric and target temperatures, perhaps 3 times the volume produced on the Moon for a given crater diameter.

Journal of Geophysical Research E: Planets↗

USGS2003

Morphology and composition of spinel in Pu'u 'O'o lava (1996-1998), Kilauea volcano, Hawaii

The morphology and composition of spinel in rapidly quenched Pu'u 'O'o vent and lava tube samples are described. These samples contain glass, olivine phenocrysts (3-5 vol.%) and microphenocrysts of spinel (~0.05 vol.%). The spinel surrounded by glass occurs as idiomorphic octahedra 5-50 μm in diameter and as chains of octahedra that are oriented with respect to each other. Spinel enclosed by olivine phenocrysts is sometimes rounded and does not generally form chains. The temperature before quenching was calculated from the MgO content of the glass and ranges from 1150 o C to 1180 o C. The oxygen fugacity before quenching was calculated by two independent methods and the log f O2 ranged from -9.2 to -9.9 (delta QFM=-1). The spinel in the Pu'u'O'o samples has a narrow range in composition with Cr/(Cr+Al)=0.61 to 0.73 and Fe 2+ /(Fe 2+ +Mg) =0.46 to 0.56. The lower the calculated temperature for the samples, the higher the average Fe 2+ /(Fe 2+ +Mg), Fe 3+ and Ti in the spinel. Most zoned spinel crystals decrease in Cr/(Cr+Al) from core to rim and, in the chains, the Cr/(Cr+Al) is greater in the core of larger crystals than in the core of smaller crystals. The occurrence of chains and hopper crystals and the presence of Cr/(Cr+Al) zoning from core to rim of the spinel suggest diffusion-controlled growth of the crystals. Some of the spinel crystals may have grown rapidly under the turbulent conditions of the summit reservoir and in the flowing lava, and the crystals may have remained in suspension for a considerable period. The rapid growth may have caused very local (μm) gradients of Cr in the melt ahead of the spinel crystal faces. The crystals seem to have retained the Cr/(Cr+Al) ratio that developed during the original growth of the crystal, but the Fe 2+ /(Fe 2+ +Mg) ratio may have equilibrated fairly rapidly with the changing melt composition due to olivine crystallization. Six of the samples were collected on the same day at various locations along a 10-km lava tube and the calculated pre-collection temperatures of the samples show a 5 o C drop with distance from the vent. The average Fe2+/(Fe2++Mg) of the spinel in these samples shows a weak positive correlation with decreasing MgO in the glass of these samples. The range in Cr 2 O 3 (0.041-0.045 wt.%) of the glass for these six samples is too small to distinguish a consistent change along the lava tube. The spinel in the Pu'u 'O'o samples shows a zoning trend in a Cr-Al-Fe 3+ diagram almost directly away from the Cr apex. This compares with a zoning trend in rapidly quenched MORB samples away from Cr coupled with decreasing Fe 3+ . The trend away from Cr displayed by spinel in rapidly quenched samples is in marked contrast to the trend of increasing Fe 3+ shown by spinel in slowly cooled lava.

Journal of Volcanology and Geothermal Research↗

USGS2024

Decoding paleomire conditions of Paleogene superhigh-organic-sulfur coals

Superhigh-organic‑sulfur (SHOS) coals (coals with organic sulfur content >4 wt%) are unique coal deposits found at a few notable locations in the world. Specific peat accumulation and preservation conditions must be met to form SHOS coals. Organic sulfur is a major constituent of such coals, and it may have various sources depending on the prevailing paleomire conditions. Understanding such paleomire conditions sheds light on the formation mechanisms of SHOS coals. This investigation decodes the paleomire conditions of the Paleogene SHOS coals from Meghalaya, India, using sulfur isotopic compositions ( δ 34 S) of organic sulfur ( δ 34 S OS ) and pyritic sulfur ( δ 34 S Py ) along with organic petrography, pyrite morphology and trace element ratios. Thirty coal samples were collected from the Jaintia Hills in the east, Khasi Hills in the middle, and Garo Hills in the west of Meghalaya. The organic sulfur content in the Garo, Khasi, and Jaintia coals varies from 1.0 to 3.3 wt%, 1.4 to 13.8 wt%, and 1.0 to 7.2 wt%, respectively. Further, after separation from pyritic sulfur and sulfate sulfur phases, the organic sulfur content ranges from 54.4 to 69.2%, 63.8 to 79.9%, and 59.3 to 73.8%, in the Garo, Khasi, and Jaintia Hills, respectively, suggesting the SHOS nature of these coal samples. The δ 34 S Py varies from −29.3 ‰ to +5.7 ‰, −21.3 ‰ to +27.3 ‰, and −12.1 ‰ to −4.3 ‰, in the Jaintia, Khasi, and Garo Hills, respectively, while the δ 34 S OS fluctuates from −4.6 ‰ to +3.7 ‰, −9.3 ‰ to +7.8 ‰, and − 9.0 ‰ to −5.0 ‰, respectively. The δ 34 S values of pyrite and organic sulfur (OS) in Jaintia coals are 34 S depleted compared to seawater sulfate (+22 ‰), leading to fractionations in the range of −51.3 ‰ to −16.3 ‰ (mean − 31.6 ‰) and − 26.6 ‰ to −18.3 ‰ (mean − 23.1 ‰) for pyritic and organic sulfur (OS), respectively. Pyrite in Khasi coals show a relatively heavier δ 34 S composition averaging at −20.5 ‰, whereas organic sulfur (OS) isotope compositions range from −31.3 ‰ to −14.2 ‰ with a mean of −22.6 ‰. Pyrite and OS in the Garo coals are depleted compared to seawater sulfate. Isotope variations in the Jaintia, Khasi, and Garo coals indicate microbial sulfate reduction (MSR) of seawater sulfate. Large isotopic fractionations between Eocene seawater sulfate and pyritic sulfur ( Δ 34 S SO4Eocene – pyrite = up to −51.3 ‰; mean − 31.6 ‰) in Jaintia coals indicate their possible formation in the water column/near the sediment-seawater interface (open system) and also hint toward dissimilatory sulfate reduction pathways that prevailed under anoxic redox conditions. However, mean values of Δ 34 S SO4Eocene – pyrite (−20.5 ‰) in the Khasi coals imply pyrite formation deeper in the sediments (more closed system) under dysoxic conditions. The dominance of OS over pyritic sulfur, framboidal pyrite, and its microcrystal size distributions in Jaintia coals may suggest syngenetic pyrite formation in open water reducing/anoxic conditions under paralic environments. Elevated Sr/Ba and U/Th values in these coals further confirm the anoxic conditions. Nevertheless, the presence of euhedral pyrite with the alleviated pyrite framboids in the Khasi coals and their complete absence in the Garo coals may suggest dysoxic-suboxic and suboxic-oxic depositional conditions, respectively. The isotopic signatures of the Garo coals suggest sulfur contribution from the parent paleobiota and MSR under a freshwater-oxic environment. Insignificant fractionations between δ 34 S Py and δ 34 S OS indicate limited iron and sulfate availability for additional sulfur cycling and disproportionation reactions, typical of oxic conditions. The absence of framboidal pyrite, elevated sulfate concentration, and mean Sr/Ba and U/Th values of 0.5 and 0.3, respectively, further suggest the freshwater peat deposition in the Garo Hills under limnotelmatic to telmatic freshwater conditions. Moreover, high inertinite content (I mmf = 9.77–33.16 vol%), possibly induced by atmospheric peat exposure, supports the interpretation of suboxic-oxic paleomire conditions in Garo Hills. Gradually decreasing mineral matter content from Jaintia (mean 13.6 vol%) to Garo coals (mean 7.4 vol%) additionally projects a transition from mesotrophic brackish to freshwater limnotelmatic environment, complementing the shift in the paleomire condition from eastern (Jaintia) to western (Garo) Meghalayan Hills.

International Journal of Coal Geology↗

USGS2012

Modification of wave-cut and faulting-controlled landforms

From a casual observation that the form of degraded fault scarps resembles the error function, this investigation proceeds through an elementary diffusion equation representation of landform evolution to the application of the resulting equations to the modern topography of scarplike landforms. The morphologic observations can be analyzed either in the form of one or more cross-strike elevation profiles or in the form of the slope-offset plot, a point plot of maximum scarp slope versus scarp offset. Working with either or both of these data representations for nine geologic structures, which range in age from 3 to 400 ka B.P. and in offset from 1 to 50 m, we apply analytical solutions for the vertical initial value scarp, the vertical continuous offset scarp, and the finite slope, initial value scarp. The model calculations are intrinsically ambiguous, yielding as the final answer only the product κ t (in the case of the initial value problem) or the product κ A −1 (in the case of the repeated faulting problem); here t is the age of a single scarp-forming event, 2 A is the vertical slip rate, and κ is the “mass diffusivity.” A single profile across three sea cliffs along the Santa Cruz, California, coast is analyzed as three separate initial value problems. A reasonably constrained age for the sea cliff standing above the Highway 1 platform returns κ = 11 GKG (1 GKG = 1 m 2 /ka). With this κ, we can date the two older sea cliffs. In fact, we do the converse: age estimates for these two older sea cliffs based on a uniform rate of uplift both yield the same κ as for the lower sea cliff. We treat a single profile of the Raymond fault in Pasadena/San Marino in terms of the repeated faulting problem; for it the uplift rate of R. Crook and others yields κ = 16 GKG. The very substantial preexisting offset across the Raymond fault must have been buried/leveled some 230 ka B.P., when the modern topography began to form. Our analysis of the Lake Bonneville shoreline scarps reveals a dependence of κ t on 2a, suggestive of nonlinear modification processes. This appearance is treated with the finite slope initial value scarp model to determine κ=1.1 GKG for the Lake Bonneville shoreline scarps. The suggestion of M. N. Machette that approximately 100,000-year-old, meter-high scarps are “unobservable” in weakly consolidated alluvial terranes of the Basin and Range and Rio Grande Rift Valley provinces can be formulated as κ ≳ 1 GKG. The coincidence between this inequality and the Lake Bonneville shoreline κ is striking, and it suggests that the value of κ = 1 GKG may be generally applicable, as a good first approximation, to the modification of alluvial terranes within the semiarid regions of the western United States. The Lake Bonneville shoreline κ is the basis for dating four sets of fault scarps in west-central Utah. The Drum Mountains fault scarps can be modeled in several different circumstances, but the most likely interpretation is that these fault scarps formed as the result of a single episode of normal faulting 3.6 to 5.7 ka B.P. The younger age is associated with quite low initial slope angles (25°). The other three sets of fault scarps show no evidence for finite initial value slopes. Fault scarps along the eastern base of the Fish Springs Range are very young, 3 ka B.P. We estimate the age of fault scarps along the western flank of the Oquirrh Mountains to be 32 ka B.P., which meets the weak geologic constraint that they be older than the Lake Bonneville shoreline. Fault scarps along the northeastern margin of the Sheeprock Mountains are even older, 53 ka B.P. An intriguing consequence of our single-event analysis of these scarps is that an 11.5-m offset occurred in a single earthquake.

Journal of Geophysical Research Solid Earth↗

USGS2012

Television observations from Surveyor 3

A total of 6315 pictures were taken by the television camera on Surveyor 3 after the lunar landing. These pictures have provided much new information about the location of the landing site on the moon, the detailed topographic and geologic characteristics of the lunar surface, and the appearance of the earth as seen from the moon, both during eclipse of the sun and during partial direct illumination by the sun. Surveyor 3 landed in a subdued crater slightly more than 200 meters in diameter, which has a low rounded rim and is about 15 meters deep. The spacecraft is situated on the east wall of the crater, about half way between the center of the crater and the rim crest. The spacecraft is inclined 14.7° ± 1.0° toward the west. The selenographic coordinates of the landing site are 2.94°S latitude, 23.34°W longitude, relative to selenodetic control adopted by the Aeronautical Chart and Information Center. Small morphologic elements of the landing site include small craters, linear ridges and troughs, and fragmental debris. The craters and fragmental debris resemble those observed at the Surveyor 1 landing site, both in distribution of shape and in distribution of size. Most of the craters in Surveyor 1 and 3 pictures are inferred to be of impact origin. Their size-frequency distribution corresponds to the distribution that would be produced by repetitive bombardment by meteoroids, a bombardment sufficiently prolonged that the crater population has reached a steady state or has come to equilibrium. Some of the craters observed at the Surveyor 3 landing site are inferred to be of secondary impact origin, and some probably have been formed either by subsidence or by drainage of fragmental debris into cracks or fissures in the subsurface. Fragmental debris at the landing site is inferred to have been derived primarily by the same process of repetitive bombardment that produced the majority of craters. The inferred volumetric size-frequency distribution of fragments, derived from the observed size distribution of fragments on the surface, is similar to the distribution that would be produced by repetitive bombardment of coherent rocks by meteoroids with a mass-frequency distribution like that found from observed meteors and recovered meteorites on earth. Two prominent strewn fields of blocky debris were observed around two craters, 13 and 15 meters across, at the Surveyor 3 site. The 13-meter crater has a sharp raised rim, and the 15-meter crater has a more subdued rounded rim. The blocks associated with the subdued crater have twice as high a mean roundness as the blocks associated with the raised-rim crater, and they are much more deeply buried. The size-frequency distribution function for the fragments in each of the strewn fields of blocks resembles the size-frequency distribution for fragments ejected by impacts in strong rock, such as Meteor Crater, Arizona. Most of the fragments at the surface of the Surveyor 3 landing site are evidently part of a layer of fragmental material of low cohesion that is at least 1 meter thick along the upper parts of the wall of the crater in which Surveyor 3 landed and may be much thicker near the center of the crater. The evidence from the Surveyor 3 pictures suggests that this layer of debris, or regolith, is subject to downslope creep or mass movement. Creep is probably caused by seismic shaking, due mainly to near and far impact events and perhaps due partly to internal lunar seismicity. Disturbances of the lunar surface produced by Surveyor 3, like those produced by Surveyor 1, exposed material at depths of a few centimeters or less that was darker than the material at the surface. The albedo of the fine-grained fragmental debris is probably 20 to 30% lower at depths of only a fraction of a millimeter than it is at the optically observed surface. All coarse fragments protruding above the general level of the surface have a higher albedo than the fine-grained matrix of the surface. These general photometric relationships can be explained if it is assumed that the surfaces of the particles in the shallow lunar subsurface tend to become coated with a dark substance; the term proposed for this hypothetical substance is ‘lunar varnish’ On the protruding surface of blocks and coarse fragments the lunar varnish is scrubbed off by the processes that cause rounding. The exposed surfaces of fine particles on the lunar surface are similarly affected, but, because they are mixed relatively rapidly with particles just beneath the surface, the process is incomplete and the fine-grained material exposed at the lunar surface, therefore, has a lower albedo than blocks and other large fragments. Coating of particles by lunar varnish evidently takes place just beneath the surface. The estimated normal luminance factor (normal albedo) of an undisturbed part of the lunar surface next to footpad 2 of the Surveyor 3 spacecraft is 8.5%. An area of the lunar surface disturbed by the surface sampler has an estimated normal luminance factor of 6.6%, and fine-grained material placed on footpad 2 by the surface sampler has an estimated normal luminance factor of 7.6%. The errors in all these estimates may be as high as 25% because of uncertainties of correction required for light scattered from the camera mirror. Preliminary search for color differences, by color reconstitution methods, revealed no determinable differences in color among various coarse blocks, the fine-grained matrix of the surface, or fine-grained material disturbed by the surface sampler. Surveyor 3 pictures of the eclipse of the sun by the earth revealed a bright region in the refraction halo surrounding the earth, which was correlated with the position of the sun, and a series of bright beads that occurred over regions of the earth largely clear of clouds. Clouds tend to occult the refracted rays of the sun, most of which pass through the lower part of the atmosphere at the limb; the beads occurred in the depressions in the optical silhouette of the earth. Preliminary reduction of the color of the refracted light showed that the brightest region, near the position of the sun, exhibited a correlated color temperature close to 4800°K. The color temperature tended to be lower for light that followed paths of greater atmospheric absorption. Preliminary analysis of Surveyor 3 pictures of the partly illuminated earth revealed colors similar to the colors recorded from orbit by the Mercury and Gemini astronauts.

Journal of Geophysical Research↗