Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Ground Water Modeling Investigation Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS2007

Development of the Hydroecological Integrity Assessment Process for Determining Environmental Flows for New Jersey Streams

The natural flow regime paradigm and parallel stream ecological concepts and theories have established the benefits of maintaining or restoring the full range of natural hydrologic variation for physiochemical processes, biodiversity, and the evolutionary potential of aquatic and riparian communities. A synthesis of recent advances in hydroecological research coupled with stream classification has resulted in a new process to determine environmental flows and assess hydrologic alteration. This process has national and international applicability. It allows classification of streams into hydrologic stream classes and identification of a set of non-redundant and ecologically relevant hydrologic indices for 10 critical sub-components of flow. Three computer programs have been developed for implementing the Hydroecological Integrity Assessment Process (HIP): (1) the Hydrologic Indices Tool (HIT), which calculates 171 ecologically relevant hydrologic indices on the basis of daily-flow and peak-flow stream-gage data; (2) the New Jersey Hydrologic Assessment Tool (NJHAT), which can be used to establish a hydrologic baseline period, provide options for setting baseline environmental-flow standards, and compare past and proposed streamflow alterations; and (3) the New Jersey Stream Classification Tool (NJSCT), designed for placing unclassified streams into pre-defined stream classes. Biological and multivariate response models including principal-component, cluster, and discriminant-function analyses aided in the development of software and implementation of the HIP for New Jersey. A pilot effort is currently underway by the New Jersey Department of Environmental Protection in which the HIP is being used to evaluate the effects of past and proposed surface-water use, ground-water extraction, and land-use changes on stream ecosystems while determining the most effective way to integrate the process into ongoing regulatory programs. Ultimately, this scientifically defensible process will help to quantify the effects of anthropogenic changes and development on hydrologic variability and help planners and resource managers balance current and future water requirements with ecological needs.

Scientific Investigations Report↗
USGS1998

Geohydrology and simulated ground-water flow in northwestern Elkhart County, Indiana

In 1994, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the City of Elkhart, developed a ground-water model of the Elkhart, Indiana, area to determine the avail-ability and source of water at potential new well fields. The modeled area covered 190 square miles of northwestern Elkhart County and a small part of southern Michigan. Three Superfund sites and several other sites in this area are undergoing environmental cleanup. The model would be used to guide the location of well fields so that Superfund sites and environmental cleanup areas would not be within recharge areas for the well fields. The City of Elkhart obtains its water supply from two aquifers separated by a generally continuous confining unit. The upper aquifer is composed primarily of sand and gravel of glacial origin. Thickness of the upper aquifer ranges from 0 to 116 feet and averages 47 feet. The lower aquifer is composed of sand and gravel with interbedded lenses of silt and clay. Thickness of the lower aquifer ranges from 1 to 335 feet and averages 35 feet. The intervening confining unit is composed of silt and clay with interbedded sand and gravel; the confining unit ranges from 0 to 177 feet, with an average thickness of 27 feet. Flow through the aquifers is generally horizontal vertically downward from the upper aquifer, through the confining unit, and into the lower aquifer, except where flow is vertically upward at the St. Joseph River and other large streams. The hydraulic characteristics of the aquifers and confining unit were estimated by analyzing aquifer-test data from well drillers? logs and by calibration of the model. The horizontal hydraulic conductivity of the upper aquifer is 170 feet per day within about 1 mile of the St. Joseph and Elkhart Rivers and 370 feet per day at distances greater than about 1 mile. The horizontal hydraulic conductivity of the lower aquifer is 370 feet per day throughout the modeled area, with the exception of an area near the center of the modeled area where the horizontal hydraulic conductivity is 170 feet per day. Transmissivity of the lower aquifer increases generally from southwest to northeast; transmissivity values range from near 0 where the lower aquifer is absent to 57,000 square feet per day and average about 8,100 square feet per day. The vertical hydraulic conductivity of the confining unit is 0.07 feet per day; the vertical conductivity of the streambeds commonly is 1.0 foot per day and ranges from 0.05 foot per day to 50 feet per day. The areal recharge rate to the outwash deposits was determined by a base-flow separation technique to be 16 inches per year, and the areal recharge rate to the till was assumed to be 4 inches per year. A two-layer digital model was used to simulate flow in the ground-water system. The model was calibrated on the basis of historical water-use data, water-level records, and gain/loss data for streams during May and June 1979. The model was recalibrated with water-use data and water-level records from 1988. For 1979 data, 49 percent of the inflow to the model area is from precipitation and 46 percent is ground-water inflow across the model boundaries. Most of the ground-water inflow across the model boundary is from the north and east, which corresponds to high values of transmissivity?as high as 57,000 feet squared per day?in the model layers in the northern and eastern areas. Eighty-two percent of the ground-water discharge is to the streams; 5 percent of the ground-water discharge is to wells. Source areas and flow paths to the City of Elkhart public well fields are affected by the location of streams and the geology in the area. Flow to the North Well Field originates north-west of the well field, forms relatively straight flow paths, and moves southeast toward the well field and the St. Joseph River. Flow to the South Well Field begins mostly in the out-wash along Yellow Creek south of the well field, moves northward, and t

Indiana↗
USGS1997

Water Budget for the Iao Area, Island of Maui, Hawaii

Ground-water recharge is estimated as the residual component of a monthly water budget calculated using soil characteristics and long-term average rainfall, streamflow, irrigation, and pan-evaporation data. The water-budget components of rainfall, direct runoff, evapotranspiration, and ground-water recharge are defined seasonally, through the use of monthly data, and spatially by land-use and geohydrologic areas, through the use of a geographic information system model. The long-term average ground-water recharge for the Iao area was estimated for four scenarios using natural land-use, and using 1926-79, 1980-85, and 1986-95 land-use and irrigation data. The recharge rate for natural conditions is 34 million gallons per day, which is 34 percent of rainfall. The average annual ground-water recharge rate for 1926-79 conditions is 51 million gallons per day, which is 41 percent of the sum of rainfall and irrigation. The recharge rates for 1980-85 and 1986-95 conditions are 40 and 36 million gallons per day, which are 37 and 35 percent of rainfall plus irrigation, respectively.

Water-Resources Investigations Report↗
USGS1996

Hydrogeology and simulation of ground-water flow, Picatinny Arsenal and vicinity, Morris County, New Jersey

Ground-water flow in glacial sediments and bedrock at Picatinny Arsenal, N.J., was simulated by use of a three-dimensional finite-difference ground- water-flow model. The modeled area includes a 4.3-square-mile area that extends from Picatinny Lake to the Rockaway River. Most of the study area is bounded by the natural hydrologic boundaries of the ground-water system. eophysical logs, lithologic logs, particle-size data, and core data from selected wells and surface geophysical data were analyzed to define the hydrogeologic framework. Hydrogeologic sections and thickness maps define six permeable and three low-permeability layers that are represented in the model as aquifers and confining units, respectively. Hydrologic data incorporated in the model include a rate of recharge from precipitation of 22 inches per year, estimated from long-term precipitation records and estimates of evapotranspiration. Additional recharge from infiltration along valleys was estimated from measured discharge of springs along the adjacent valley walls and from estimates of runoff from upland drainage that flows to the valley floor. Horizontal and vertical hydraulic conductivities of permeable and low-permeability layers were estimated from examination of aquifer-test data, gamma-ray logs, borehole cuttings, and previously published data. Horizontal hydraulic conductivities in glacial sediments range from 10 to 380 feet per day. Vertical hydraulic conductivities of the low-permeability layers range from 0.01 to 0.7 feet per day. The model was calibrated by simulating steady-state conditions during 1989-93 and by closely matching simulated and measured ground-water levels, vertical ground-water-head differences, and streamflow gain and loss. Simulated steady-state potentiometric- surface maps produced for the six permeable layers indicate that ground water in the unconfined material within Picatinny Arsenal flows predominantly toward the center of the valley, where it discharges to Green Pond Brook. Beneath the upper confining unit, ground water flows southwestward, down the valley. Between First Street and Farley Avenue, the upper confining unit pinches out near the valley walls, resulting in a major input of water to, and causing a local potentiometric high in, the underlying aquifer layers. Ground-water-flow directions southwest of the southern arsenal boundary are predominantly to the Rockaway River.

New Jersey↗
USGS1983

Structure, temperature, pressure, and salinity of Cenozoic aquifers of south Texas

A study of the hydrogeology of deep sedimentary basins using the Neogene deposits of the northern Gulf of Mexico basin as a model was initiated by the U.S. Geological Survey in the 1960's (Jones, 1969). This study led to investigations of geopressured-geothermal resources in this basin (Papadopulos and others, 1975; Wallace and others, 1979) and of the waste storage capabilities of the Wilcox Group in Texas (Jones and others, 1976). Techniques for delineating pressure, temperature, and salinity variations within the geologic framework were developed in conjunction with these and related studies. The purpose of this hydrologic atlas is to delineate the hydrogeology of the onshore Cenozoic aquifers of south Texas, using these techniques. The location of the study area in Texas is shown in figure 1. Hydrogeologic cross section A-A' is shown in figure 2. The surface geology of the area and the line of section A–A' are shown in figure 3. Geophysical logs of oil tests provided the framework for this section. Interpretations presented are based upon data from these logs; information from published ground water and geological reports; and structural and geologic interpretations from maps prepared by Peppard, Souders and Associates for the U.S. Geological Survey under Purchase Order Numbers 67482 and 67.483.

Texas↗
USGS2008

Relation Between Solid-Phase and Dissolved Arsenic in the Ground-Water System Underlying Northern Preble County, Ohio

The U.S. Geological Survey (USGS), in cooperation with the Miami Conservancy District, collected and analyzed samples of the aquifer materials and ground water from multiple depths at two sites in northern Preble County, Ohio. The aquifer materials included glacial deposits and Silurian carbonate bedrock. In the study area, elevated arsenic concentrations have been detected in ground water from both types of aquifers. The aquifer materials were described in terms of the stratigraphy and the bulk elemental composition of 70 samples. In addition, six water-producing horizons were selected for more detailed study; ground-water quality was analyzed, microanalytical techniques were used to examine thin sections of the aquifer materials, and simplified geochemical modeling was done to identify plausible reactions between the ground water and aquifer materials. At both study sites, the highest solid-phase arsenic concentrations were from a roughly similar stratigraphic position - a transition zone that extends from just above the Wisconsinan/Illinoian contact to just below the Pleistocene/Silurian contact. For carbonate bedrock, the solid-phase arsenic concentrations were generally low (<1 to 4 mg/kg (milligrams per kilogram)). The one notable exception was a thin horizon about 10 feet below the top of bedrock, which had an arsenic concentration of 42 mg/kg. This horizon showed some textural and compositional evidence of alteration by geothermal fluids. Additional study might be warranted to investigate whether arsenic concentrations in ground water from carbonate bedrock could be decreased by excluding discrete horizons from the open intervals of wells. For glacial deposits, solid-phase arsenic concentrations were slightly higher in fine-grained deposits (2 to 20 mg/kg) than in coarse-grained deposits (2 to 9 mg/kg). In ground water, arsenic concentrations ranged from <1 to 51 ug/L (micrograms per liter); samples from two horizons had concentrations greater than the U.S. Environmental Protection Agency Maximum Contaminant Level (MCL) of 10 ug/L. Dissolved arsenic concentrations appear to be more closely related to redox conditions of the ground water than to the arsenic content of the aquifer materials. Geochemical modeling and thin-section analysis were generally consistent with the idea that arsenic was released to water from iron oxides under iron-reducing conditions. In addition, there was some evidence in support of the idea that arsenic can be removed from ground water by precipitation of sulfide minerals, which occurs under sulfate-reducing conditions. At one site, the dissolved arsenic concentrations in two water-bearing horizons increased from <1 to 51 ug/L over a depth of 15 feet. The large increase might be due to a shift from sulfate-reducing to methanogenic conditions; in the absence of sulfate reduction, arsenic is not sequestered in sulfide minerals and may accumulate in the ground water.

Scientific Investigations Report↗
USGS2001

Geochemistry of the Madison and Minnelusa aquifers in the Black Hills area, South Dakota

The Madison and Minnelusa aquifers are two of the most important aquifers in the Black Hills area because of utilization for water supplies and important influences on surface-water resources resulting from large springs and streamflow- loss zones. Examination of geochemical information provides a better understanding of the complex flow systems within these aquifers and interactions between the aquifers. Major-ion chemistry in both aquifers is dominated by calcium and bicarbonate near outcrop areas, with basinward evolution towards various other water types. The most notable differences in major-ion chemistry between the Madison and Minnelusa aquifers are in concentrations of sulfate within the Minnelusa aquifer. Sulfate concentrations increase dramatically near a transition zone where dissolution of anhydrite is actively occurring. Water chemistry for the Madison and Minnelusa aquifers is controlled by reactions among calcite, dolomite, and anhydrite. Saturation indices for gypsum, calcite, and dolomite for most samples in both the Madison and Minnelusa aquifers are indicative of the occurrence of dedolomitization. Because water in the Madison aquifer remains undersaturated with respect to gypsum, even at the highest sulfate concentrations, upward leakage into the overlying Minnelusa aquifer has potential to drive increased dissolution of anhydrite in the Minnelusa Formation. Isotopic information is used to evaluate ground-water flowpaths, ages, and mixing conditions for the Madison and Minnelusa aquifers. Distinctive patterns exist in the distribution of stable isotopes of oxygen and hydrogen in precipitation for the Black Hills area, with isotopically lighter precipitation generally occurring at higher elevations and latitudes. Distributions of 18O in ground water are consistent with spatial patterns in recharge areas, with isotopically lighter 18O values in the Madison aquifer resulting from generally higher elevation recharge sources, relative to the Minnelusa aquifer. Three conceptual models, which are simplifications of lumped-parameter models, are considered for evaluation of mixing conditions and general ground-water ages. For a simple slug-flow model, which assumes no mixing, measured tritium concentrations in ground water can be related through a first-order decay equation to estimated concentrations at the time of recharge. Two simplified mixing models that assume equal proportions of annual recharge over a range of years also are considered. An ?immediate-arrival? model is used to conceptually represent conditions in outcrop areas and a ?time-delay? model is used for locations removed from outcrops, where delay times for earliest arrival of ground water generally would be expected. Because of limitations associated with estimating tritium input and gross simplifying assumptions of equal annual recharge and thorough mixing conditions, the conceptual models are used only for general evaluation of mixing conditions and approximation of age ranges. Headwater springs, which are located in or near outcrop areas, have the highest tritium concentrations, which is consistent with the immediate-arrival mixing model. Tritium concentrations for many wells are very low, or nondetectable, indicating general applicability of the timedelay conceptual model for locations beyond outcrop areas, where artesian conditions generally occur. Concentrations for artesian springs generally are higher than for wells, which indicates generally shorter delay times resulting from preferential flowpaths that typically are associated with artesian springs. In the Rapid City area, a distinct division of isotopic values for the Madison aquifer corresponds with distinguishing 18O signatures for nearby streams, where large streamflow recharge occurs. Previous dye testing in this area documented rapid ground-water flow (timeframe of weeks) from a streamflow loss zone to sites located several miles away. These results are used to ill

Water-Resources Investigations Report↗
USGS1991

Hydrogeology and ground-water flow in the carbonate rocks of the Little Lehigh Creek basin, Lehigh County, Pennsylvania

The Little Lehigh Creek basin is underlain mainly by a complex assemblage of highly-deformed Cambrian and Ordovician carbonate rocks. The Leithsville Formation, Allentown Dolomite, Beekmantown Group, and Jacksonburg Limestone act as a single hydrologic unit. Ground water moves through fractures and other secondary openings and generally is under water-table conditions. Median annual ground-water discharge (base flow) to Little Lehigh Creek near Allentown (station 01451500) during 1946-86 was 12.97 inches or 82 percent of streamflow. Average annual recharge for 1975-83 was 21.75 inches. Groundwater and surface-water divides do not coincide in the basin. Ground-water underflow from the Little Lehigh Creek basin to the Cedar Creek basin in 1987 was 4 inches per year. A double-mass curve analysis of the relation of cumulative precipitation at Allentown to the flow of Schantz Spring for 1956-84 showed that cessation of quarry pumping and development of ground water for public supply in the Schantz Spring basin did not affect the flow of Schantz Spring. Ground-water flow in the Little Lehigh Creek basin was simulated using a finite-difference, two-dimensional computer model. The geologic units in the modeled area were simulated as a single water-table aquifer. The 134-squaremile area of carbonate rocks between the Lehigh River and Sacony Creek was modeled to include the natural hydrologic boundaries of the ground-water-flow system. The ground-water-flow model was calibrated under steady-state conditions using 1975-83 average recharge, evapotranspiration, and pumping rates. Each geologic unit was assigned a different hydraulic conductivity. Initial aquifer hydraulic conductivity was estimated from specific-capacity data. The average (1975-83) water budget for the Little Lehigh Creek basin was simulated. The simulated base flow from the carbonate rocks of the Little Lehigh Creek basin above gaging station 01451500 is 11.85 inches per year. The simulated ground-water underflow from the Little Lehigh Creek basin to the Cedar Creek basin is 4.04 inches per year. For steady-state calibration, the root-mean-squared difference between observed and simulated heads was 21.19 feet. The effects of increased ground-water development on base flow and underflow out of the Little Lehigh Creek basin for average and drought conditions were simulated by locating a hypothetical well field in different parts of the basin. Steady-state simulations were used to represent equilibrium conditions, which would be the maximum expected long-term effect. Increased ground-water development was simulated as hypothetical well fields pumping at the rate of 15, 25, and 45 million gallons per day in addition to existing ground-water withdrawals. Four hypothetical well fields were located near and away from Little Lehigh Creek in upstream and downstream areas. The effects of pumping a well field in different parts of the Little Lehigh Creek basin were compared. Pumping a well field located near the headwaters of Little Lehigh Creek and away from the stream would have greatest effect on inducing underflow from the Sacony Greek basin and the least effect on reducing base flow and underflow to the Ceda^r Creek basin. Pumping a well field located near the headwaters of Little Leh|igh Creek near the stream would have less impact on inducing underflow from|the Sacony Creek basin and a greater impact on reducing the base flow of Little Lehigh Creek because more of the pumpage would come from diverted base flow. Pumping a well field located in the downstream area of the Little Lehigh Creek basin away from the stream would have the greatest effect on the underflow to the Cedar Creek basin. Pumping a well field located in the downstream area of the Little Lehigh Creek basin near the stream would have the greatest effect on reducing the base flow of Little Lehigh Cteek. Model simulations show that groundwater withdrawals do not cause a proportional reduction in base flow. Under average conditions, ground-water withdrawals are equal to 48 to 70 percent of simulated base-flow reductions; under drought conditions, ground-water withdrawals are equal to 35 to 73 percent of simulated base-flow reductions. The hydraulic effects of pumping largely depend on well location. In the Little Lehigh basin, surface-water and ground-water divides do not coincide, and ground-water development, especially near surface-water divides, can cause ground-water divides to shift and induce ground-water underflow from adjacent basins. Large-scale ground-water pumping in a basin may not produce expected reductions of base flow in that basin because of shifts in the ground-water divide; however, such shifts can reduce base flow in adjacent surface-water basins.

Water-Resources Investigations Report↗
USGS1983

Hydrogeology of the Sarasota-Port Charlotte area, Florida

The surficial and intermediate aquifers are the major source of public water supplies in the Sarasota-Port Charlotte, Florida, area because of the relatively poor quality of Floridan aquifer water. The hydrogeologic framework consists of the surficial aquifer, intermediate aquifers (Tamiami-upper Hawthorn and lower Hawthorn-upper Tampa aquifers) and confining beds, Floridan aquifer, and lower confining bed (or base of the Floridan aquifer). The quality of ground water in the surficial and intermediate aquifers is generally good, except in the western (coastal) and southern parts where saltwater intrusion or incomplete flushing of connate water has occurred. The mineral content of ground water generally increases with depth and areally from the northeast towards the west and south. A water budget for the study area shows that an average annual rainfall of 51.0 inches minus an evapotranspiration of 38.0 inches per year and streamflow of 12.5 inches per year leaves 0.5 inch per year of recharge to the surficial aquifer. Combined pumpage from the aquifers is 1.06 inches per year. A preliminary quasi-time dimensional model has been applied to the study area to check the reasonableness of the hydrogeologic framework defined and of aquifer parameters. The model was considered calibrated when the final head matrix was within plus or minus 5 feet of the starting head.

Florida↗
USGS1989

Geohydrology, simulation of ground-water flow, and ground-water quality at two landfills, Marion County, Indiana

Geologic, hydrologic, and water-quality data were collected at the Julietta and Tibbs-Banta landfills in Marion County. Both landfills were closed in the mid-1970's, and sewage sludge mixed with dirt was spread on the landfills in the mid-1980's as part of a revegetation project. The landfills were constructed in unconsolidated glacial sediments that consist of sand, gravel, silt, and clay. The maximum thickness of the sediments is 180 feet at Julietta and 100 feet at Tibbs-Banta. Both landfills are underlain by sand and gravel aquifers and are adjacent to gaining streams. Ground water flows toward and into the streams at each study area. Two sand and gravel aquifers were mapped at Julietta and four were mapped at TibbsBanta. The aquifers are separated in places by discontinuous clay layers. Ground-water-flow models, calibrated to simulate steady-state low-flow conditions, indicate that about 19,000 gallons of water per day move through the refuse at Julietta and 42,000 gallons per day move through the refuse at Tibbs-Banta. The Julietta model also indicates that recharge through the surface of the landfill is less than in the surrounding natural areas, probably because of the addition and compaction of the sludge/soil mixture. Concentrations of dissolved inorganic substances in ground-water samples indicate that leachate from both landfills is reaching the shallow aquifers. The effect on deeper aquifers is small because of the predominance of horizontal ground-water flow and discharge to the streams. Increases in almost all dissolved constituents were observed in shallow wells that are screened beneath and downgradient from the landfills. Several analyses, especially those for bromide, dissolved solids, and ammonia, were useful in delineating the plume of leachate at both landfills.

Indiana↗
USGS1995

Geohydrology and water quality of stratified-drift aquifers in the middle Merrimack River basin, south-central New Hampshire

The U.S. Geological Survey, in cooperation with the State of New Hampshire, Department of Environmental Services, Water Resources Division has assessed the geohydrology and water quality of stratified-drift aquifers in the middle Merrimack River basin in south-central New Hampshire. The middle Merrimack River basin drains 469 square miles; 98 square miles is underlain by stratified-drift aquifers. Saturated thickness of stratified drift within the study area is generally less than 40 feet but locally greater than 100 feet. Transmissivity of stratified-drift aquifers is generally less than 2,000 feet squared per day but locally exceeds 6, 000 feet squared per day. At present (1990), ground-water withdrawals from stratified drift for public supply are about 0.4 million gallons per day within the basin. Many of the stratified-drift aquifers within the study area are not developed to their fullest potential. The geohydrology of stratified-drift aquifers was investigated by focusing on basic aquifer properties, including aquifer boundaries; recharge, discharge, and direction of ground-water flow; saturated thickness and storage; and transmissivity. Surficial geologic mapping assisted in the determination of aquifer boundaries. Data from 757 wells and test borings were used to produce maps of water-table altitude, saturated thickness, and transmissivity of stratified drift. More than 10 miles of seismic-refraction profiling and 14 miles of seismic-reflection profiling were also used to construct the water table and saturated-thickness maps. Stratified-drift aquifers in the southern, western, and central parts of the study area are typically small and discontinuous, whereas aquifers in the eastern part along the Merrimack River valley are continuous. The Merrimack River valley aquifers formed in glacial Lakes Merrimack and Hooksett. Many other smaller discontinuous aquifers formed in small temporary ponds during deglaciation. A stratified-drift aquifer in Goffstown was analyzed for aquifer yield by use of a two-dimensional, finite-difference ground-water-flow model. Yield of the Goffstown aquifer was estimated to be 2.5 million gallons per day. Sensitivity analysis showed that the estimate of aquifer yield was most sensitive to changes in hydraulic conductivity. The amount of water induced into the aquifer from the Piscataquog River was most affected by changes in estimates of streambed conductance. Results of analysis of water samples from 10 test wells indicate that, with some exceptions, water in the stratified-drift aquifers generally meets U.S. Environmental Protection Agency primary and secondary drinking-water regulations. Water from two wells had elevated sodium concentrations, waterfront two wells had elevated concentrations of dissolved iron, and waterfront seven wells had elevated concentrations of manganese. Known areas of contamination were avoided during water-quality sampling.

New Hampshire↗
USGS2006

Hydraulic and solute-transport properties and simulated advective transport of contaminated ground water in a fractured-rock aquifer at the Naval Air Warfare Center, West Trenton, New Jersey, 2003

Volatile organic compounds, predominantly trichloroethylene and its degradation products, have been detected in ground water at the Naval Air Warfare Center (NAWC), West Trenton, New Jersey. An air-stripping pump-and-treat system has been in operation at the NAWC since 1998. An existing ground-water-flow model was used to evaluate the effect of a change in the configuration of the network of recovery wells in the pump-and-treat system on flow paths of contaminated ground water. The NAWC is underlain by a fractured-rock aquifer composed of dipping layers of sedimentary rocks of the Lockatong and Stockton Formations. Hydraulic and solute-transport properties of the part of the aquifer composed of the Lockatong Formation were measured using aquifer tests and tracer tests. The heterogeneity of the rocks causes a wide range of values of each parameter measured. Transmissivity ranges from 95 to 1,300 feet squared per day; the storage coefficient ranges from 9 x 10-5 to 5 x 10-3; and the effective porosity ranges from 0.0003 to 0.002. The average linear velocity of contaminated ground water was determined for ambient conditions (when no wells at the site are pumped) using an existing ground-water-flow model, particle-tracking techniques, and the porosity values determined in this study. The average linear velocity of flow paths beginning at each contaminated well and ending at the streams where the flow paths terminate ranges from 0.08 to 130 feet per day. As a result of a change in the pump-and-treat system (adding a 165-foot-deep well pumped at 5 gallons per minute and reducing the pumping rate at a nearby 41-foot-deep well by the same amount), water in the vicinity of three 100- to 165-foot-deep wells flows to the deep well rather than the shallower well.

New Jersey↗
USGS2001

A field and statistical modeling study to estimate irrigation water use at Benchmark Farms study sites in southwestern Georgia, 1995-96

A benchmark irrigation monitoring network of farms located in a 32-county area in southwestern Georgia was established in 1995 to improve estimates of irrigation water use. A stratified random sample of 500 permitted irrigators was selected from a data base--maintained by the Georgia Department of Natural Resources, Georgia Environmental Protection Division, Water Resources Management Branch--to obtain 180 voluntary participants in the study area. Site-specific irrigation data were collected at each farm using running-time totalizers and noninvasive flowmeters. Data were collected and compiled for 50 farms for 1995 and 130 additional farms for the 1996 growing season--a total of 180 farms. Irrigation data collected during the 1996 growing season were compiled for 180 benchmark farms and used to develop a statistical model to estimate irrigation water use in 32 counties in southwestern Georgia. The estimates derived were developed from using a statistical approach know as "bootstrap analysis" that allows for the estimation of precision. Five model components--whether-to-irrigate, acres irrigated, crop selected, seasonal-irrigation scheduling, and the amount of irrigation applied--compose the irrigation model and were developed to reflect patterns in the data collected at Benchmark Farms Study area sites. The model estimated that peak irrigation for all counties in the study area occurred during July with significant irrigation also occurring during May, June, and August. Irwin and Tift were the most irrigated and Schley and Houston were the least irrigated counties in the study area. High irrigation intensity primarily was located along the eastern border of the study area; whereas, low irrigation intensity was located in the southwestern quadrant where ground water was the dominant irrigation source. Crop-level estimates showed sizable variations across crops and considerable uncertainty for all crops other than peanuts and pecans. Counties having the most irrigated acres showed higher variations in annual irrigation than counties having the least irrigated acres. The Benchmark Farms Study model estimates were higher than previous irrigation estimates, with 20 percent of the bias a result of underestimating irrigation acreage in earlier studies. Model estimates showed evidence of an upward bias of about 15 percent with the likely cause being a misrepresented inches-applied model. A better understanding of the causes of bias in the model could be determined with a larger irrigation sample size and increased substantially by automating the reporting of monthly totalizer amounts.

Georgia↗
USGS1982

Method for estimating historical irrigation requirements from ground water in the High Plains in parts of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas, and Wyoming

Historical information on ground-water pumpage for irrigation is required for use with a computer model of the High Plains aquifer. Available historical data on ground-water pumpage in the High Plains were inadequate for use with the computer model. Consequently, a method was developed to estimate historical pumpage data. Two principal components were used to develop estimates of ground-water pumpage: (1) Acreage irrigated; and (2) irrigation demand. The Blaney-Criddle formula was used to calculate consumptive-use requirements for irrigated crops grown on the High Plains. The irrigation demand for each crop was estimated by subtracting precipitation available to the crop from the consumptive-use requirement of the crop. Irrigation demands were combined with irrigated acreages to estimate the volume of irrigation water required for areas in the High Plains. Estimates of irrigation water requirements were compiled for 1949, 1954, 1959, 1964, 1969, 1974, and 1978. Irrigation pumpage for use with the computer model can be estimated from the irrigation water requirements by applying a factor to account for irrigation system efficiency.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗
USGS1976

Mathematical model of the West Bolsa Ground-water Basin, San Benito County, California

Simulation of the West Bolsa ground-water basin hydrology in California had provided values of basin recharge and discharge and nodally distributed values of transmissivity and storage coefficient. Average net recharge from April 1945 to March 1969 was 6.2 cubic feet per second and occurred as subsurace recharge and infiltration of rain and minor streamflow. Discharge from the basin during the same period was 8.1 cubic feet per second and occurred as pumping and leakage from confined parts of the basin. Values of transmissivity used in the model generally range from 3,300 to 20,000 feet squared per day. Values of storage coefficient used in the model range from 0.0005 to 0.10. (Woodard-USGS)

California↗
USGS1984

Ground water in the Fresno area, California; preliminary report

The U.S. Geological Survey, in cooperation with Fresno County, is developing a computer model of the unconfined aquifer system in the Fresno area. In the area, consolidated rocks are overlain by unconsolidated deposits. The unconsolidated deposits are divided into a lower fine-grained unit and an overlying coarse-grained unit. The system is assumed to be a single unconfined unit. The top of the system is the water table and the bottom is the base of the coarse-grained deposits. The northeastern boundary is the only natural lateral hydrologic boundary. The other lateral boundaries are placed so that errors along them will not affect heads in the area of interest. Initial heads for 1943, hydraulic conductivity, and bottom elevations were used in a steady-state model that generated net flux values. It is anticipated that most of the remaining effort will center on model calibration. (USGS)

Water-Resources Investigations Report↗
USGS1994

The computer model Hydrotherm, a three-dimensional finite-difference model to simulate ground-water flow and heat transport in the temperature range of 0 to 1,200 degrees C

Quantitative modeling of the deep parts of magmatic- hydrothermal systems has been limited by the lack of publicly available, documented computer models for multiphase, high-temperature flow. This report documents HYDROTHERM, a finite-difference model for three-dimensional, multiphase flow of pure water and heat over a temperature range of 0 to 1,200 degrees Celsius and a pressure range of 0.5 *0 10,000 bars.HYDROTHEP*M is an extension of multiphase geothermal models developed by the U.S. Geological Survey in the 1970's. It solves numerical approximations to mass- and energy-balance equations that are posed in terms of pressure and enthalpy. Major assumptions are that the rock matrix can be treated as a porous medium; that water and rock are in thermal equilibrium; and that capillary pressure is negligible.

Water-Resources Investigations Report↗
USGS2000

Water resources of the Blackstone River basin, Massachusetts

By 2020, demand for water in the Blackstone River Basin is expected to be 52 million gallons per day, one-third greater than the demand of 39 million gallons per day in 1980. Most of this increase is expected to be supplied by increased withdrawals of ground water from stratified-drift aquifers in the eastern and northern parts of the basin. Increased withdrawals from stratified-drift aquifers along the Blackstone River and in the western part of the basin also are expected. The eastern and northern parts of the Blackstone River Basin contain numerous small, discontinuous aquifers which, as a group, comprise the largest ground-water resource of the study area. Fifteen aquifers, ranging in areal extent from 0.57 to 4.3 square miles, were identified. These aquifers have maximum saturated thicknesses ranging from less than 10 feet to 105 feet and maximum transmissivities ranging from less than 1,000 to more than 20,000 feet squared per day. Yields of nine study aquifers were estimated by use of digital ground-water-flow models. Yields depend on the hydraulic properties of the aquifer and the amount of streamflow available for depletion by wells. If streamflow is maintained at 98-percent duration, long-term yields from the aquifers that would be expected to be equaled or exceeded 50 percent of the time range from 0.22 to 11 million gallons per day, and long-term yields equaled or exceeded 95 percent of the time range from 0.06 to 1.0 million gallons per day. If streamflow is maintained at 99.5-percent duration, long-term yields equaled or exceeded 50 percent of the time range from 0.22 to 11 million gallons per day, long-term yields equaled or exceeded 95 percent of the time range from 0.04 to 1.4 million gallons per day, and longterm yields equaled or exceeded 98 percent of the time range from 0.02 to 0.39 million gallons per day. Maintaining streamflow at 98-percent duration is a more restrictive criterion than maintaining streamflow at 99.5-percent duration. The upper Lake Quinsigamond, upper West River, and Stone Brook aquifers are capable of sustaining withdrawals of at least 1 million gallons per day more than their rates in the mid-1980s. The upper Mill River and Auburn aquifers are not capable of sustaining additional withdrawals of 0.25 million gallons per day. Ground-water quality in the Auburn aquifer has been degraded by activities and contaminants associated with urbanization. A nearly continuous deposit of stratified drift almost 30 miles long and from 400 feet to more than 1 mile wide occupies lowland areas along the southeastern part of the Blackstone River. These deposits were divided into four aquifers ranging in areal extent from 1.8 to 3.5 square miles. These aquifers have maximum saturated thicknesses ranging from 54 to 170 feet and maximum transmissivities ranging from less than 1,500 to more than 20,000 feet squared per day. The Blackstone River receives substantial amounts of treated municipal wastewater. Infiltration of poor-quality surface water has significantly increased the specific conductance and the concentrations of all major ions, ammonia, iron, and manganese in the water pumped from at least two wells near the river. These wells derive about 41 and 48 percent of their yield from infiltrated surface water. At both sites, aquifer heterogeneity controlled the movement of infiltrated water to the wells. At one of these sites, where the flow of infiltrated water was tracked (by use of a digital model) in three dimensions, infiltrated water moved to the well through gravel layers that did not constitute the entire thickness of the aquifer. Changes in stream discharge that resulted in changes in surface-water quality also affected the quality of ground water at that site. The western part of the Blackstone River Basin contains the smallest aquifers evaluated in the study area. Six aquifers, ranging in areal extent from 0.05 to 1.3 square miles, were identified. The hydraulic properties of most of these aquifers have not been determined, but available data indicate that maximum saturated thicknesses range from 28 to 71 feet and maximum transmissivities range from 2,300 to 15,000 feet squared per day.

Massachusetts↗