Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS2022

Characterization of subsurface conditions and recharge at the irrigated four-plex baseball field, Fort Irwin National Training Center, California, 2018–20

The U.S. Geological Survey performed subsurface and geophysical site characterization of the irrigated four-plex baseball field in the Langford Valley–Irwin Groundwater Subbasin, as part of a research study in cooperation with the U.S. Environmental Protection Agency, the Agricultural Research Service, and the Fort Irwin National Training Center, California. To help meet future demands, the Fort Irwin National Training Center is evaluating the efficacy of gravity-fed drywells to enhance storm-water recharge into the Langford Valley–Irwin Groundwater Subbasin by bypassing fine-grained, less permeable deposits between land surface and the water table. The amount, rate, and location of recharge beneath an irrigated baseball field in the groundwater basin at the Fort Irwin National Training Center is not well understood, so data were collected using physical and geophysical techniques to characterize subsurface materials, geologic controls, and the vertical movement of water through the unsaturated zone to the water table near the drywell at the Fort Irwin National Training Center. Based on the data collected and interpreted from these techniques, several fine-grained deposits were identified. Although these deposits appear to impede the downward movement of water through the unsaturated zone locally, they are not laterally continuous, and water appears to continue to move downward when it reaches the edges of the deposits. These data will help managers evaluate recharge at the site and determine if the use of gravity-fed drywells enhances recharge from surface runoff.

California↗
USGS2009

Archive of digital boomer seismic reflection data collected offshore east-central Florida during USGS cruise 00FGS01, July 14-22, 2000

In July of 2000, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore Florida's east coast from Brevard County to northern Martin County. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, Geographic Information System (GIS) information, digital and handwritten Field Activity Collection System (FACS) logs, and Federal Geographic Data Committee (FGDC) metadata. A filtered and gained (a relative increase in signal amplitude) digital image of each seismic profile is also provided. Refer to the Acronyms page for expansions of all acronyms and abbreviations used in this report. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU) (Cohen and Stockwell, 2005). Example SU processing scripts and USGS Software for viewing the SEG-Y files (Zihlman, 1992) are also provided. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 00FGS01 tells us the data were collected in 2000 for cooperative work with the Florida Geological Survey (FGS) and the data were collected during the first field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer plate is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged, emits a short acoustic pulse, or shot, which propagates through the water, sediment column, or rock beneath. The acoustic energy is reflected at density boundaries (such as the seafloor, sediment, or rock layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2D) vertical profile of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters. The unprocessed seismic data are stored in SEG-Y format (Barry and others, 1975). For a detailed description of the data format, refer to the SEG-Y Format page. See the How To Download SEG-Y Data page for download instructions. The printable profiles provided are GIF images that were filtered and gained using Seismic Unix software. Refer to the Software page for details about the processing and examples of the processing scripts. The printable profiles can be viewed from the Profiles page or from links located on the trackline maps. To view the trackline maps and navigation files, and for more information about these items, see the Navigation page. Detailed information about the navigation system used can be found in table 1. Of a total record length of 200 ms, only the upper 100 ms of each profile are displayed because no useful information was observed deeper in the sections. A 10 ms deep water delay appears on lines b57-b63 and sl2-sl28. No digital data were collected for line sl6. However, line sl6r is a second attempt to collect digital data for this line. Digital data and 500-shot-interval location navigation are not available for the last 1,161 shots of line sl26 due to an equipment malfunction.

Florida↗
USGS2014

Part II—Geophysical investigations in the Hawaiian Islands

During 1938 and 1939, an extensive series of geophysical surveys, employing both resistivity and magnetic methods, have been carried on in the Hawaiian Islands by the Section of Geophysics of the United States Geological Survey in cooperation with the Division of Ground‐Water of the Survey and the Division of Hydrography of the Territorial Government (see Fig. 1). During this time, surveys have been conducted on the islands of Oahu, Molokai, and Maul. Two distinct types of ground‐water occurrence are being investigated: (1) The basal fresh‐water lens floating on underlying salt water in obedience to the Ghyben‐Herzberg principle (Fig. 2); and (2) perched ground‐water (Fig. 3) .

Hawaii↗
USGS2012

Archive of digital boomer subbottom data collected during USGS cruise 05FGS01 offshore east-central Florida, July 17-29, 2005

In July of 2005, the U.S. Geological Survey (USGS), in cooperation with the Florida Geological Survey (FGS), conducted a geophysical survey of the Atlantic Ocean offshore of Florida's east coast from Flagler Beach to Daytona Beach. This report serves as an archive of unprocessed digital boomer subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. The USGS Saint Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, 05FGS01 tells us the data were collected in 2005 for cooperative work with the FGS and the data were collected during the first field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The boomer subbottom processing system consists of an acoustic energy source that is made up of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and when discharged emits a short acoustic pulse, or shot, which propagates through the water column and shallow stratrigraphy below. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by the receiver (a hydrophone streamer), and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2-D) vertical image of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the acquisition geometry. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG Y format (Barry and others, 1975), except an ASCII format is used for the first 3,200 bytes of the card image header instead of the standard EBCDIC format. For a detailed description about the recorded trace headers, refer to the SEG Y Format page. The SEG Y files may be downloaded and processed with commercial or public domain software such as Seismic Unix (Cohen and Stockwell, 2005). See the How To Download SEG Y Data page for download instructions. The printable profiles provided here are GIF images that were processed and gained using SU software; refer to the Software page for links to example SU processing scripts. The processed SEG Y data were also exported to Chesapeake Technology, Inc. (CTI) SonarWeb software to produce a geospatially interactive version of the profile that allows the user to obtain a geographic location and depth from the profile for a given cursor position; this information is displayed in the status bar of the browser. Please note that clicking on the profile image switches it to "Expanded View" (a compressed image of the entire line) and cursor tracking is not available in this mode.

Florida↗
USGS1987

Mineral Resources of the Morey and Fandango Wilderness Study Areas, Nye County, Nevada

The Morey (NV-060-191) and Fandango (NV-060-190) Wilderness Study Areas are located in the northern Hot Creek Range about 25 mi north of Warm Springs, Nev. At the request of the Bureau of Land Management, 46,300 acres of the Morey and Fandango Wilderness Study Areas were studied. In this report, the area studied is referred to as 'the wilderness study area', or simply 'the study area'. Geologic, geochemical, geophysical, and mineral surveys were conducted by the USGS and the USBM in 1984 to appraise the identified mineral resources and to assess the mineral resource potential of the study areas. These studies indicate that there are small identified resources of zinc, lead, and silver at the Lead Pipe property in the Fandango Wilderness Study Area, several areas of high potential for the occurrence of gold resources in the Fandango study area, small areas of low and moderate potential for the occurrence of silver, lead, and zinc resources in the Fandango study area, areas of moderate and high potential for the occurrence of silver, lead, and zinc resources in the Morey study area, and an area of low potential for copper, molybdenum, and tin in the Morey study area. Both study areas have low resource potential for petroleum, natural gas, uranium, and geothermal energy.

Bulletin↗
USGS2007

Archive of digital CHIRP seismic reflection data collected during USGS cruise 06SCC02 offshore of the Chandeleur Islands, Louisiana, July 2006

In July of 2006, the U.S. Geological Survey (USGS) conducted a geophysical survey offshore of the Chandeleur Islands, Louisiana, as part of the USGS Barrier Island Coastal Monitoring project (BICM), which is part of a broader study focused on Subsidence and Coastal Change (SCC). This report serves as an archive of unprocessed digital Compressed High Intensity Radar Pulse (CHIRP) seismic reflection data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, observer's logbook, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (a relative increase in signal amplitude has been applied) digital images of the seismic profiles are also provided.

Louisiana↗
USGS2013

Archive of digital boomer subbottom data collected during USGS cruises 99FGS01 and 99FGS02 offshore southeast and southwest Florida, July and November, 1999

In July (19 - 26) and November (17 - 18) of 1999, the USGS, in cooperation with the Florida Geological Survey (FGS), conducted two geophysical surveys in: (1) the Atlantic Ocean offshore of Florida's east coast from Orchid to Jupiter, FL, and (2) the Gulf of Mexico offshore of Venice, FL. This report serves as an archive of unprocessed digital boomer subbottom data, trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (showing a relative increase in signal amplitude) digital images of the subbottom profiles are also provided. The USGS St. Petersburg Coastal and Marine Science Center (SPCMSC) assigns a unique identifier to each cruise or field activity. For example, identifiers 99FGS01 and 99FGS02 refer to field data collected in 1999 for cooperative work with the FGS. The numbers 01 and 02 indicate the data were collected during the first and second field activities for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity identification (ID).

Florida↗
USGS1980

Interpretation of an aerial radiometric and magnetic survey of the Salmo-Priest study area (RARE E6-981 A1-981), Pend Oreille County, Washington and Boundary County, Idaho

An aerial radiometric and magnetic survey of the Salmo-Priest study area (RARE E6-981) (index map) was made by the U.S. Geological Survey during October, 1978. Geophysical data from the survey will be used in the assessment of the mineral-resource potential of the study area. The Salmo-Priest area is located in northeastern Washington and northern Idaho and the north edge is the United States-Canadian boundary. This report presents the data obtained by the survey and an interpretation of the data.

Idaho, Washington↗
USGS2022

Chandeleur Islands to Breton Island bathymetric and topographic datasets and operational sediment budget development: Methodology and analysis report

This study is part of the Coastal Protection and Restoration Authority (CPRA) Louisiana Barrier Island Comprehensive Monitoring (BICM) program. The goal of the BICM program is to provide long-term data on the barrier islands of Louisiana for monitoring change and assisting in coastal management. The BICM program uses historical data and acquires new data to map and monitor shoreline position, sediment properties, topography, bathymetry, and habitat. Since 2006, the U.S. Geological Survey (USGS) has collected geophysical and sedimentologic data across the Breton National Wildlife Refuge (BNWR) through the BICM program and collaborative USGS projects such as the Barrier Island Evolution Research project (under CPRA contract number 2000339324, BICM2–Chandeleurs TopoBathy DEM), which builds upon the previous BICM physical assessment of the BNWR outlined in a separate report. This project uses topographic and bathymetric data from three periods (1917–1922, 2006–2007, and 2013–2015) to develop digital elevation models (DEMs), measure elevation change, and calculate sediment budgets for the barrier island system. The sediment budget analysis, derived from the volumetric change between the three periods, is necessary for understanding sediment transport dynamics along barrier islands and providing information for effective coastal management. This report describes the methods used to acquire, process, and produce these products.

Louisiana↗
USGS1969

Report on exploration of the Wadi Yiba copper prospect, Tihamat Ash Sham quadrangle, Kingdom of Saudi Arabia

The first phase of an exploration program at The Wadi Yiba copper prospect consisted of geologic mapping, prospecting, sampling, geophysical surveys, and diamond drilling. Copper mineralization is in a sedimentary rock sequence comprised mostly of siliceous, calcareous, and dolomitic rocks metamorphosed to the greenschist facies. The metasedimentary rocks are overlain and underlain by metavolcanic rocks. They are folded into a tight north-plunging syncline transected by two fault systems. Results from the exploration program indicate that a fault zone which sub-parallels the synclinal axis and cuts siliceous dolomite contains copper mineralization and small amounts of gold and silver. Copper and silver beaming pyroclastic rocks were found in the upper part of the metasedimentary rock sequence. Concentrations of copper mineralization seem to be restricted to particular rock units in the metasedimentary rock sequence. Primary sulfides have not been encountered in the drill holes to date and the results from one drill hole indicate secondary copper sulfide minerals to a vertical depth of 60 meters. Further exploration seems to be warranted and a program is proposed which includes the investigation of other mineral occurrences and geophysical anomalies in the region.

Open-File Report↗
USGS1977

A multi-channel digital telemetry system for low frequency geophysical data

An inexpensive general purpose digital telemetry system for collection of low frequency geophysical data from U.S. Geological Survey instruments (eg. tilt, strain, gravity, creep, water level, radon, magnetic field, resistivity, telluric current, temperature, etc.) has been designed and built. This system provides data for a more general interactive data acquisition, retrieval and analysis system. The field stations are self-contained, battery operated and housed in weather proof containers. Each accepts up to 15 analog data inputs in the range of -5 to +5 volts. The dynamic range is 70db. The units transmit information as FSK (Frequency Shift Keyed) tones onto either a phone line or radio link with up to 150 transmitters sharing one line. The average power consumption is 0.06 nR watts where n is the 1 number of input channels transmitted and R is the sample rate in minutes -1 . The central receiver-recorder unit accepts and decodes the FSK tones and converts, formats and records the digital data together with time information and station identification on IBM combatible magnetic tape. The digital data are also converted and recorded in analog form for visual monitoring.

Open-File Report↗
USGS1980

Multichannel seismic-reflection profiles collected along the U.S. continental margin in 1978

During 1978, the U.S.. Geological Survey (USGS) contracted with Geophysical Services, Inc. (GSI) for GSI to collect 4,813 km of 48-channel seismic-reflection profiles along the continental margin between North Carolina and Maine. Fifteen lines were acquired perpendicular to the margin Clines 18 through 32), and six lines were acquired parallel to the margin Clines 33 through 38). The profiles were shot by the Motor Vessel (MV) CARINO and MV CECIL GREEN between May and November 1978. A 3,600-long hydrophone streamer was used; it was composed of 24 groups of 100-m length each near the ship, followed by 24 groups of 50-mlength each. Tuned airgun arrays totaling 2,000 and 1,400 cubic inches of air were used by the MV- CARINO and MV CECIL GREEN, respectively. The profiles were stacked by GSI and displayed in conventional time-variant scaled format to 12 seconds of recording time with vertical scales of .2.5 inches per second and horizontal scales of 1.2 km per inch. Additional protessing was applied to Line 25 across the Baltimore Canyon Trough and Line 32 across the Carolina Trough. Data collected along Line 25 over the Outer Shelf, Slope and upper Rise were restacked with 1 1/2-km-spaced velocity analyses, signature deconvolution, deep-water multiple deconvolution, velocity filtering Con shelf only), and time migration. The restacked part and remaining parts of Line 25 were converted to depth sections having a vertical scale of 1.2 km per inch (vertical exaggeration: 2/1). Data collected along two parts of Line 32 were also restacked with signature and deep-water multiple deconvolution. Line 32 was also converted to a depth section except for the first 80 km near shore. Profiles 18-38 may be inspected at the USGS in Woods Hole, MA 02543. Copies of the profiles may be, purchased only from the National Geophysical and Solar-Terrestrial Data Center, NOAA, Boulder, Co 80303.

Open-File Report↗
USGS2019

Lithologic descriptions, geophysical logs, and source-rock geochemistry of the U.S. Geological Survey Alcova Reservoir AR–1–13 Core Hole, Natrona County, Wyoming

In 2013, a continuous 624-foot core hole was drilled and logged by the U.S. Geological Survey in Natrona County, Wyoming, with the goal to better understand Cretaceous source rocks in the Wind River Basin. The core hole, named the Alcova Reservoir AR–1–13, penetrated the interval extending from the upper part of the Lower Cretaceous Cloverly Formation to the lower part of the Upper Cretaceous Frontier Formation. The lithologies are predominantly mudrock, with minor amounts of sandstone and altered volcanic ash beds that were deposited in open marine, nearshore marine, and fluvial settings. Samples were collected from open marine clay-rich, dark-colored mudrocks, and these were analyzed for total organic carbon content and by programmed pyrolysis analysis. The results show that the lower part of the Frontier Formation, Shell Creek Shale equivalent, and the Thermopolis Shale contain Type III gas-prone kerogen, with poor to fair generative source rock potential. The upper part of the Mowry Shale has good to excellent generative potential, with organic matter composed mainly of Type II oil-prone kerogen with some mixed Type II/III kerogen capable of generating oil and gas.

Wyoming↗
USGS2009

Quaternary Geologic Framework of the St. Clair River between Michigan and Ontario, Canada

Concern about the effect of geomorphic changes in the St. Clair River on water levels in the Upper Great Lakes resulted in the need for information on the geologic framework of the river. A geophysical survey of the Upper St. Clair River between Port Huron, MI, and Sarnia, Ontario, Canada, was conducted to determine the Quaternary geologic framework of the region. Previously available and new sediment samples and photographic and video data support the interpretation of the seismic stratigraphy and surficial geology. Three seismic stratigraphic units and two unconformities were identified. Glacial drift, consisting of interbedded till and glaciolacustrine deposits, overlies shale. Glaciofluvial and modern fluvial processes have eroded the glacial drift. Glaciofluvial, glaciolacustrine, fluvial, and lacustrine deposits overlie this unconformity. Seismic facies were interpreted to identify areas where these geologic facies exist; however, in the absence of distinct boundaries between facies, these deposits were mapped as one undifferentiated unit. This unit is thickest in the northernmost 3 kilometers of the river, where it consists of relatively coarse-grained fluvial, reworked glaciofluvial, and possibly glaciofluvial deposits. To the south, this coarse-grained unit thins or is absent. The undifferentiated unit comprises most of the surficial deposits in the northernmost river area. Some areas of glacial drift, predominantly till, are exposed at the lake and riverbed. The shale is not exposed anywhere in the region. Geophysical surveys at sites downriver, together with the results of previous studies, indicate that the geologic framework is similar to that in the northernmost river area except for the absence or reduced thickness of the coarse-grained fluvial deposits. Instead, glacial drift is exposed at the riverbed or is covered by a veneer of sediment. This information on the substrate is important for ongoing sediment transport studies.

Open-File Report↗
USGS2008

Hydrogeology and water quality of the Leetown area, West Virginia

The U.S. Geological Survey’s Leetown Science Center and the co-located U.S. Department of Agriculture’s National Center for Cool and Cold Water Aquaculture both depend on large volumes of cold clean ground water to support research operations at their facilities. Currently, ground-water demands are provided by three springs and two standby production wells used to augment supplies during periods of low spring flow. Future expansion of research operations at the Leetown Science Center is dependent on assessing the availability and quality of water to the facilities and in locating prospective sites for additional wells to augment existing water supplies. The hydrogeology of the Leetown area, West Virginia, is a structurally complex karst aquifer. Although the aquifer is a karst system, it is not typical of most highly cavernous karst systems, but is dominated by broad areas of fractured rock drained by a relatively small number of solution conduits. Characterization of the aquifer by use of fluorometric tracer tests, a common approach in most karst terranes, therefore only partly defines the hydrogeologic setting of the area. In order to fully assess the hydrogeology and water quality in the vicinity of Leetown, a multi-disciplinary approach that included both fractured rock and karst research components was needed. The U.S. Geological Survey developed this multi-disciplinary research effort to include geologic, hydrologic, geophysical, geographic, water-quality, and microbiological investigations in order to fully characterize the hydrogeology and water quality of the Leetown area, West Virginia. Detailed geologic and karst mapping provided the framework on which hydrologic investigations were based. Fracture trace and lineament analysis helped locate potential water-bearing fractures and guided installation of monitoring wells. Monitoring wells were drilled for borehole geophysical surveys, water-quality sampling, water-level measurements, and aquifer tests to characterize the quality of water and the hydraulic properties of the aquifer. Surface geophysical surveys provided a 3-dimensional view of bedrock resistivity in order to assess geologic and lithologic controls on ground-water flow. Borehole geophysical surveys were conducted in monitoring wells to assess the storage and movement of water in subsurface fractures. Numerous single-well, multi-well, and straddle packer aquifer tests and step-drawdown tests were conducted to define the hydraulic properties of the aquifer and to assess the role of bedrock fractures and solution conduits in the flow of ground water. Water samples collected from wells and springs were analyzed to assess the current quality of ground water and provide a baseline for future assessment. Microbiological sampling of wells for indicator bacteria and human and animal DNA provided an analysis of agricultural and suburban development impacts on ground-water quality. Light detection and ranging (LiDAR) data were analyzed to develop digital elevation models (DEMs) for assessing sinkhole distribution, to provide elevation data for development of a ground-water flow model, and to assess the distribution of major fractures and faults in the Leetown area. The flow of ground water in the study area is controlled by lithology and geologic structure. Bedrock, especially low permeability units such as the shale Martinsburg Formation and the Conococheague Limestone, act as barriers to water flowing down gradient and across bedding. This retardation of cross-strike flow is especially pronounced in the Leetown area, where bedding typically dips at steep angles. Highly permeable fault and fracture zones that disrupt the rocks in cross-strike directions provide avenues through which ground water can flow laterally across or through strata of low primary permeability. Significant strike parallel thrust faults and cross-strike faults typically coincide with larger solution conduits and act as drains for the more pervasive network of interconnected diffuse fractures. Results of borehole geophysical surveys indicate that although numerous fractures may intersect a borehole, only one or two of the fractures typically transmit most of the water to a well. The diffuse-flow dominated network of fractures that provides the majority of storage occupies only a small proportion of the total aquifer volume but constitutes the majority of porosity within the aquifer. Solution conduits, while occupying a relatively small volume of the overall aquifer, are especially important because they serve as primary drains for the ground-water flow system. Surface resistivity maps and cross-sectionsshow anomalous areas of low resistivities coincident with the prevailing geologic strike at N. 20º E., with major cross-strike faults, and with major springs in the region. Transmissivity derived from straddle packer tests was highly variable, and ranged over three orders of magnitude (1.8 x 10 -6 to 5.9 x 10 -3 ft 2 /d) in diffuse-flow fractures. A similar large variability in transmissivity was documented by single- and multi-well aquifer tests conducted in conduit-flow dominated portions of the aquifer (2.0 x 10 3 to 1.4 x 10 4 ft 2 /d) in lowland areas immediately adjacent to the Leetown Science Center. A stream-gaging station installed on Hopewell Run near the point where the stream exits the Leetown watershed indicates average daily streamflow for the Hopewell Run of approximately 11.2 ft 3 /s, and ranged from a minimum of 1.80 ft 3 /s on September 28, 2005, to a maximum of 73.0 ft 3 /s on December 11, 2003. Base-flow (ground-water) discharge surveys identified numerous small seeps adjacent to streams in the area. Hydrographs of the stage of Balch Spring show rapid response to individual storms. Strong correlation of the flow of Hopewell Run and Balch Spring indicates the nearby losing stream reach is partly responsible for higher fluctuations in the stage of Balch Spring. A water budget for the study period (2003-2005), based on measured precipitation and hydrograph analyses, is expressed as Precipitation (38.60 in/yr) = Surface Runoff (1.36 in/yr) + Ground-Water Discharge (17.73 in/yr) + Evapotranspiration (24.23 in/yr) – Change in storage (4.72 in/yr). Flow of ground water through the epikarst, a shallow zone of intensely weathered rock and regolith, can be rapid (on the order of days or weeks) as flow is concentrated in solution conduits. Flow within the intermediate and deeper zones is typically much slower. Eight dye-tracer tests conducted in the Leetown area found ground-water flow patterns to be divergent, with velocities ranging from about 12.5 to 610 ft/day and a median velocity of 50 ft/day. Estimates of ground-water age in carbonate rocks in the region are on the order of 15 years in the shallower portions of the aquifer to 50 years or older for deeper portions of the aquifer. Shallow springs can have a significant component of fairly young water (< 5 years in age). Ground-water samples collected from 16 sites (12 wells and 4 springs) in the Leetown area were analyzed for more than 340 constituents. Only turbidity, indicator bacteria, and radon were typically present in concentrations exceeding U.S. Environmental Protection Agency (USEPA) drinking-water or aquatic life standards.

West Virginia↗