Geology ReportsSearch

SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources

Hydrogeologic framework of the Floridan aquifer system in Florida and in parts of Georgia, Alabama, and South Carolina

The Floridan aquifer system of the Southeastern United States is comprised of a thick sequence of carbonate rocks that are mostly of Paleocene to early Miocene age and that are hydraulically connected in varying degrees. The aquifer system consists of a single vertically continuous permeable unit updip and of two major permeable zones (the Upper and Lower Floridan aquifers) separated by one of seven middle confining units downdip. Neither the boundaries of the aquifer system or of its component high- and low-permeability zones necessarily conform to either formation boundaries or time-stratigraphic breaks. The rocks that make up the Floridan aquifer system, its upper and lower confining units, and a surficial aquifer have been separated into several chronostratigraphic units. The external and internal geometry of these stratigraphic units is presented on a series of structure contour and isopach maps and by a series of geohydrologic cross sections and a fence diagram. Paleocene through middle Eocene units consist of an updip clastic facies and a downdip carbonate bank facies, that extends progressively farther north and east in progressively younger units. Upper Eocene and Oligocene strata are predominantly carbonate rocks throughout the study area. Miocene and younger strata are mostly clastic rocks. Subsurface data show that some modifications in current stratigraphic nomenclature are necessary. First, the middle Eocene Lake City Limestone cannot be distinguished lithologically or faunally from the overlying middle Eocene Avon Park 'Limestone.' Accordingly, it is proposed that the term Lake City be abandoned and the term Avon Park Formation be applied to the entire middle Eocene carbonate section of peninsular Florida and southeastern Georgia. A reference well section in Levy County, Fla., is proposed for the expanded Avon Park Formation. The Avon Park is called a 'formation' more properly than a 'limestone' because the unit contains rock types other than limestone. Second, like the Avon Park, the lower Eocene Oldsmar and Paleocene Cedar Keys 'Limestones' of peninsular Florida practically everywhere contain rock types other than limestone. It is therefore proposed that these units be referred to more accurately as Oldsmar Formation and Cedar Keys Formation. The uppermost hydrologic unit in the study area is a surficial aquifer that can be divided into (1) a fluvial sand-and-gravel aquifer in southwestern Alabama and westernmost panhandle Florida, (2) limestone and sandy limestone of the Biscayne aquifer in southeastern peninsular Florida, and (3) a thin blanket of terrace and fluvial sands elsewhere. The surficial aquifer is underlain by a thick sequence of fine clastic rocks and low-permeability carbonate rocks, most of which are part of the middle Miocene Hawthorn Formation and all of which form the upper confining unit of the Floridan aquifer system. In places, the upper confining unit has been removed by erosion or is breached by sinkholes. Water in the Floridan aquifer system thus occurs under unconfined, semiconfined, or fully confined conditions, depending upon the presence, thickness, and integrity of the upper confining unit. Within the Floridan aquifer system, seven low permeability zones of subregional extent split the aquifer system in most places into an Upper and Lower Floridan aquifer. The Upper Floridan aquifer, which consists of all or parts of rocks of Oligocene age, late Eocene age, and the upper half of rocks of middle Eocene age, is highly permeable. The middle confining units that underlie the Upper Floridan are mostly of middle Eocene age but may be as young as Oligocene or as old as early Eocene. Where no middle confining unit exists, the entire aquifer system is comprised of permeable rocks and for hydrologic discussions is treated as the Upper Floridan aquifer.

Alabama, Florida, Georgia, South Carolina

Revised nomenclature, definitions, and correlations for the Cretaceous formations in USGS-Clubhouse Crossroads #1, Dorchester County, South Carolina

The stratigraphy of the Cretaceous section in a continuously cored stratigraphic test hole, USGS-Clubhouse Crossroads #1, is reviewed and amended herein. Located in southern Dorchester County, S.C., the Clubhouse Crossroads #1 core is one of the principal stratigraphic reference sections in the southern Atlantic Coastal Plain. Traditional and revised systems of stratigraphic nomenclature for the outcropping Cretaceous formations of the Carolinas are reviewed for their applicability in defining subsurface Cretaceous formations at Clubhouse Crossroads. The revised nomenclature, exemplified by the formations proposed by J. P. Owens in 1989 and by N. F. Sohl and Owens in 1991, is preferred for this purpose over the traditional nomenclature established by D.J.P. Swift and S.D. Heron, Jr., in 1969. The revised nomenclature is selected because of its greater emphasis on the historical succession of entire sedimentary systems (timeparallel formations), in contrast to the emphasis placed on the physical continuity of individual facies through time (time-transgressive formations) in the traditional nomenclature. Physical relationships between the two types of formations are discerned by using K.E. Caster's 1934 facies model, in which the time-transgressive units of the traditional model are his magnafacies and the time-parallel units of the revised model are sets of his laterally contiguous parvafacies. In 1977, G.S. Gohn and others and J.E. Hazel and others provisionally delineated Cretaceous formations in the Clubhouse Crossroads #1 core by using Swift and Heron's traditional units. The publication of additional lithologic and paleontologic data since 1977 for Cretaceous units in the core and for Cretaceous units throughout the Carolinas provides a basis for reviewing and amending the original definitions of the Cretaceous formations at Clubhouse Crossroads. Ages assigned to the Cretaceous units at Clubhouse Crossroads by Hazel and others are also reviewed. The boundaries and definitions of the Cape Fear, Middendorf, Black Creek, and Peedee Formations originally used for the core by Gohn and others and Hazel and others are substantially changed herein. In addition, the Black Creek Formation of the core is raised in rank to become the Black Creek Group, which consists of two newly defined formations (Cane Acre and Coachman) and two newly recognized formations previously described in outcrop (Bladen and Donoho Creek). Four subsurface formations that are not known in outcrop are newly defined in the core (Beech Hill, Clubhouse, Shepherd Grove, and Caddin). The revised stratigraphy of the Cretaceous section in the Clubhouse Crossroads #1 core, from base to top, is as follows: Beech Hill Formation (Cenomanian?), Clubhouse Formation (late Cenomanian? and Turonian), Cape Fear Formation (late Turonian? to early Santonian), Middendorf Formation (middle Santonian), Shepherd Grove Formation (late Santonian and early Campanian), Caddin Formation (early Campanian), Cane Acre Formation (middle Campanian, Black Creek Group), Coachman Formation (middle to late Campanian, Black Creek Group), Bladen Formation (late Campanian, Black Creek Group), Donoho Creek Formation (early Maastrichtian, Black Creek Group), and Peedee Formation (late early Maastrichtian to middle or late Maastrichtian).

Professional Paper

Sedimentology, Behavior, and Hazards of Debris Flows at Mount Rainier, Washington

Mount Rainier is potentially the most dangerous volcano in the Cascade Range because of its great height, frequent earthquakes, active hydrothermal system, and extensive glacier mantle. Many debris flows and their distal phases have inundated areas far from the volcano during postglacial time. Two types of debris flows, cohesive and noncohesive, have radically different origins and behavior that relate empirically to clay content. The two types are the major subpopulations of debris flows at Mount Rainier. The behavior of cohesive flows is affected by the cohesion and adhesion of particles; noncohesive flows are dominated by particle collisions to the extent that particle cataclasis becomes common during near-boundary shear. Cohesive debris flows contain more than 3 to 5 percent of clay-size sediment. The composition of these flows changed little as they traveled more than 100 kilometers from Mount Rainier to inundate parts of the now-populated Puget Sound lowland. They originate as deep-seated failures of sectors of the volcanic edifice, and such failures are sufficiently frequent that they are the major destructional process of Mount Rainier's morphologic evolution. In several deposits of large cohesive flows, a lateral, megaclast-bearing facies (with a mounded or hummocky surface) contrasts with a more clay-rich facies in the center of valleys and downstream. Cohesive flows at Mount Rainier do not correlate strongly with volcanic activity and thus can recur without warning, possibly triggered by non-magmatic earthquakes or by changes in the hydrothermal system. Noncohesive debris flows contain less than 3 to 5 percent clay-size sediment. They form most commonly by bulking of sediment in water surges, but some originate directly or indirectly from shallow slope failures that do not penetrate the hydrothermally altered core of the volcano. In contrast with cohesive flows, most noncohesive flows transform both from and to other flow types and are, therefore, the middle segments of flow waves that begin and end as flood surges. Proximally, through the bulking of poorly sorted volcaniclastic debris on the flanks of the volcano, flow waves expand rapidly in volume by transforming from water surges through hyperconcentrated stream flow (20 to 60 percent sediment by volume) to debris flow. Distally, the transformations occur more slowly in reverse order - from debris flow, to hyperconcentrated flow, and finally to normal streamflow with less than 20 percent sediment by volume. During runout of the largest noncohesive flows, hyperconcentrated flow has continued for as much as 40 to 70 kilometers. Lahars (volcanic debris flows and their deposits) have occurred frequently at Mount Rainier over the past several thousand years, and generally they have not clustered within discrete eruptive periods as at Mount St. Helens. An exception is a period of large noncohesive flows during and after construction of the modern summit cone. Deposits from lahar-runout flows, the hyperconcentrated distal phases of lahars, document the frequency and extent of noncohesive lahars. These deposits also record the following transformations of debris flows: (1) the direct, progressive dilution of debris flow to hyperconcentrated flow, (2) deposition of successively finer grained lobes of debris until only the hyperconcentrated tail of the flow remains to continue downstream, and (3) dewatering of coarse debris flow deposits to yield fine-grained debris flow or hyperconcentrated flow. Three planning or design case histories represent different lengths of postglacial time. Case I is representative of large, infrequent (500 to 1,000 years on average) cohesive debris flows. These flows need to be considered in long-term planning in valleys around the volcano. Case II generalizes the noncohesive debris flows of intermediate size and recurrence (100 to 500 years). This case is appropriate for consideration in some structural design. Case III flows are

Professional Paper

Geochemical studies of rare earth elements in the Portuguese pyrite belt, and geologic and geochemical controls on gold distribution

This report describes geochemical and geological studies which were conducted by the U.S. Geological Survey (USGS) and the Servicos Geologicos de Portugal (SPG) in the Portuguese pyrite belt (PPB) in southern Portugal. The studies included rare earth element (REE) distributions and geological and geochemical controls on the distribution of gold. Rare earth element distributions were determined in representative samples of the volcanic rocks from five west-trending sub-belts of the PPB in order to test the usefulness of REE as a tool for the correlation of volcanic events, and to determine their mobility and application as hydrothermal tracers. REE distributions in felsic volcanic rocks show increases in the relative abundances of heavy REE and a decrease in La/Yb ratios from north to south in the Portuguese pyrite belt. Anomalous amounts of gold are distributed in and near massive and disseminated sulfide deposits in the PPB. Gold is closely associated with copper in the middle and lower parts of the deposits. Weakly anomalous concentrations of gold were noted in exhalative sedimentary rocks that are stratigraphically above massive sulfide deposits in a distal manganiferous facies, whereas anomalously low concentrations were detected in the barite-rich, proximal-facies exhalites. Altered and pyritic felsic volcanic rocks locally contain highly anomalous concentrations of gold, suggesting that disseminated sulfide deposits and the non-ore parts of massive sulfide deposits should be evaluated for their gold potential.

Professional Paper

Petrography, structure, age, and thermal history of granitic coastal plain basement in the Chesapeake Bay impact structure, USGS-NASA Langley core, Hampton, Virginia

The USGS-NASA Langley corehole at Hampton , Va., was drilled in 2000 and was the first corehole to reach coastal plain basement in the late Eocene Chesapeake Bay impact structure . The Langley core provided samples of granite that had been concealed by 626.3 meters (2,054.7 feet) of preimpact, synimpact, and postimpact sediments. The granite, here named the Langley Granite, is pale red, medium grained, massive, and homogeneous in composition and fabric. It has a peraluminous composition (alumina saturation index 1.1) and a seriate-inequigranular, hypidiomorphic, isotropic fabric. A pervasive secondary mineral assemblage of chlorite + albite + clinozoisite is consistent with either deuteric alteration or lower greenschist-facies metamorphism. Chlorite, the principal mafic mineral, occurs as tabular masses that suggest pseudomorphous replacement of biotite. The top of the granite is weathered but not saprolitized and is nonconformably overlain by Lower Cretaceous clastic sediments. A SHRIMP 206 Pb/ 238 U weighted average zircon age of 612±10 Ma (2σ) indicates Neoproterozoic crystallization of the Langley Granite. The 40 Ar/ 39 Ar ages of microcline and plagioclase are consistent with regional cooling and uplift after the late Paleozoic Alleghanian orogeny. Zircon and apatite fission-track cooling ages of 375±44 Ma and 184±32 Ma (2σ), respectively, indicate no discernible impact -related thermal disturbance at the Langley corehole location in the annular trough of the structure about 19 kilometers (12 miles) outside the margin of the central crater. Modeling the apatite fission-track data places upper limits on the impact -related heating at this location. For an impact -related thermal disturbance equivalent to a modeled thermal spike having a duration of 1 to 0.1 million years, temperatures in this part of the impact structure could not have been higher than about 100°C-120°C. Most fractures, faults, and veins in the Langley Granite contain lower greenschist-facies minerals and are inferred to predate the impact . No shock-metamorphosed minerals or other features clearly attributable to the impact were found in the granite. Studies of the granite provide a glimpse into the nature of crystalline terranes beneath the Atlantic Coastal Plain and Chesapeake Bay and provide limits on the geographic extent of impact -generated shock and thermal effects.

Chesapeake Bay

Miocene Total Petroleum System -- Lower Bakersfield Arch Assessment Unit of the San Joaquin Basin Province: Chapter 14 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The Lower Bakersfield Arch Assessment Unit (AU) of the Miocene Total Petroleum System (San Joaquin Basin Province) is primarily defined by the distribution of hydrocarbons generated from biosiliceous shale of the Monterey Formation and by the distribution of basinal-facies sandstones of the Stevens sand of Eckis (1940; hereafter referred to as Stevens sand). Traps are principally stratigraphic and structural/stratigraphic, with most discovered accumulations occurring in deep-sea channel, fan, and braided submarine channel deposits of the late Miocene Stevens sand. Smaller and fewer accumulations are found in older sandstones such as the Vedder and Jewett Sands of Oligocene to Miocene age. Compared to the west side of the basin, the AU is largely unstructured, except for localized down-to-the-basin normal faults. Map boundaries of the assessment unit are shown in figures 14.1 and 14.2; this assessment unit supersedes the Lower Bakersfield Arch play 1003 considered by the U.S. Geological Survey (USGS) in the 1995 National Assessment (Beyer, 1996). Stratigraphically, the AU extends from the uppermost crystalline basement to the topographic surface (fig. 14.3). The AU is bounded on the east and north by the limit of basinal- facies sandstones of the Stevens sand; this eastern boundary corresponds to the approximate location of the shelf-slope break of the San Joaquin Basin in late Miocene time. The western boundary of the AU is the approximate eastern limit of structural deformation on the basin’s west side. The White Wolf Fault bounds the AU on the south.

California

Age, distribution, and stratigraphic relationship of rock units in the San Joaquin Basin Province, California: Chapter 5 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The San Joaquin Basin is a major petroleum province that forms the southern half of California’s Great Valley, a 700-km-long, asymmetrical basin that originated between a subduction zone to the west and the Sierra Nevada to the east. Sedimentary fill and tectonic structures of the San Joaquin Basin record the Mesozoic through Cenozoic geologic history of North America’s western margin. More than 25,000 feet (>7,500 meters) of sedimentary rocks overlie the basement surface and provide a nearly continuous record of sedimentation over the past ~100 m.y. Further, depositional geometries and fault structures document the tectonic evolution of the region from forearc setting to strike-slip basin to transpressional margin. Sedimentary architecture in the San Joaquin Basin is complicated because of these tectonic regimes and because of lateral changes in depositional environment and temporal changes in relative sea level. Few formations are widespread across the basin. Consequently, a careful analysis of sedimentary facies is required to unravel the basin’s depositional history on a regional scale. At least three high-quality organic source rocks formed in the San Joaquin Basin during periods of sea level transgression and anoxia. Generated on the basin’s west side, hydrocarbons migrated into nearly every facies type in the basin, from shelf and submarine fan sands to diatomite and shale to nonmarine coarse-grained rocks to schist. In 2003, the U.S. Geological Survey (USGS) completed a geologic assessment of undiscovered oil and gas resources and future additions to reserves in the San Joaquin Valley of California (USGS San Joaquin Basin Province Assessment Team, this volume, chapter 1). Several research aims supported this assessment: identifying and mapping the petroleum systems, modeling the generation, migration, and accumulation of hydrocarbons, and defining the volumes of rock to be analyzed for additional resources. To better understand the three dimensional relationships between hydrocarbon source and reservoir rocks, we compiled a database consisting of more than 13,000 well picks and of one-mile resolution seismic grids. Both the well picks and the seismic grids characterize the depths to the top of key stratigraphic units. This database formed the basis of subsequent numerical modeling efforts, including the construction of a three- dimensional geologic model (Hosford Scheirer, this volume, chapter 7) and simulation of the petroleum systems in space and time (Peters, Magoon, Lampe, and others, this volume, chapter 12). To accomplish this modeling, we synthesized the age, geographic distribution, lithology, and petroleum characteristics of hydrocarbon source and reservoir rocks in the basin. The results of that synthesis are presented in this paper in the form of new stratigraphic correlation columns for the northern, central, and southern San Joaquin Valley (fig. 5.1; note that all figures are at the back of this report, following the References Cited). The stratigraphic relationships and ages published here draw heavily on published and unpublished studies of the San Joaquin Basin. The stratigraphy presented in each of the columns necessarily idealizes the subsurface geology over a relatively large area, instead of representing the specific geology at an individual well, oil and gas field, or outcrop. In this paper we present the background rationale for defining the geographic divisions of the basin (inset map, fig. 5.1), the paleontological time scales used for assigning absolute ages to rock units (figs. 5.2 and 5.3), and the supporting maps illustrating the geographic distribution of each rock type included in the stratigraphic column (figs. 5.4 through 5.64).

California

Geology of the Arabian Peninsula; shield area of western Saudi Arabia

Western Arabia lies within the low-latitude desert of north Africa and the Middle East, the core being the Arabian segment of the African Shield. The core of complex basement rocks accounts for about 670,000 km 2 , or one-third of the Arabian Peninsula. Reconnaissance mapping of these crystalline rocks, together with bordering sedimentary rocks and volcanic flows, begun in 1950, resulted during the next 13 years in a series of geologic and geographic maps without extensive texts. The maps served as general guides for development of natural resources, including water supplies, ore deposits, and building materials. An intensive exploration program that began in 1963 and involved numerous geologists has vastly increased geologic information. Rainfall in Arabia is meager and episodic, and vegetation is sparse except in isolated copses on the crest of the Hejaz Range. Comparison of flora with similar species in the Sudan, where records of rainfall have long been kept, allows evaluation of mean annual precipitation. Wandering bedouin following fodder created a delicate balance between population and water supply-now disturbed by wells drilled in alluvium and lava fields. A trapezoidal region of Precambrian crystalline rocks lies along the northeast flank of the Red Sea, with two long prongs extending northwest and southeast for a total of 1,800 km. These basement rocks of the Arabian Shield are well exposed on the uplands, scarp mountains, and coastal pediments where the Phanerozoic cover rocks have been stripped as a result of Paleozoic epeirogeny and Tertiary ramping. The shield outcrops are divided into three tectonic provinces by N. 45°W.- trending shear zones of the Najd fault system of latest Proterozoic and possibly earliest Paleozoic time. The southwestern province, the 'Asir1 upland, was sharply uplifted and tilted to the northeast during the Neogene. The northwestern province, consisting of the Ash Shifa'- Hisma upland as well as Jabal Shammar farther east, similarly was uplifted and tilted. These two provinces are separated by the flat-lying median N ajd province, which is chiefly bounded by the principal Najd faults. The outcrops of the shield rocks are of the Late Proterozoic Eonupper Riphean to Vendian or Infracambrian epochs, including the Ediacarian System. The most reliable isotopic ages range from about 900 to 560 m.y., but some Middle Proterozoic rocks may be present in the easternmost shield. The rocks are divided into six lithostratigraphic sequences, two plutonic suites, and an ophiolitic suite. The mafic and ultramafic volcanic and plutonic rocks of the ophiolitic suite everywhere were emplaced tectonically and are probably of different ages in different places. Some ophiolite occurs as obducted blocks, but most is highly deformed and altered to serpentinite in fault zones that mostly define sutures between different tectonic blocks or terranes within the shield. Three of the lithostratigraphic sequences consist of mafic to silicic volcanic rocks and volcanic-derived clastic rocks which, with their subvolcanic plutonic rocks of a dioritic suite, probably formed in oceanic island arcs during convergent plate tectonism. These rocks make up the primary, or first-formed, crust of the shield. Chemical analyses show that the primary shield rocks, regardless of age, are principally calc-alkalic with some associated tholeiitic varieties. Most of the layered rocks are andesitic, but they range from basalt to dacite and in places contain intercalated pillow basalt, marble, chert, and carbonaceous or graphitic schist. Most of the plutonic rocks of the dioritic suite are dioritic, but they range from gabbro to trondhjemite and rarely contain potassium feldspar. The sequences and an associated dioritic suite become younger toward the eastern shield, that is, the primary crust of the shield youngs toward the east. Two western sequences consist of the Jiddah (Samran) and BaishBahah Groups and range in radiometric age from about 900 to 800 m.y.; the eastern sequence consists of the Halaban (Hulayfah) Group and ranges from 800 to about 700 m.y. During subsequent orogeny, most of the rocks were intensely deformed and mostly metamorphosed to upper greenschist facies, but rising in places to the almandine-amphibolite facies. Two other lithostratigraphic sequences with an associated plutonic granitic suite are the products of two mountain-building episodes during which the primary crust was greatly thickened and converted into craton. The two sequences, including largely the Ablah (Al Ays) and Murdama (Shammar) Groups, consist of abundant sedimentary rocks, commonly arkosic, that are the erosional products of the orogenic mountains. They are several thousand meters thick. Less abundant calc-alkalic to alkalic volcanic rocks, commonly dacitic and rhyolitic, are intercalated with the sedimentary rocks. The plutonic rocks of the granitic suite in association with both sequences have syntectonic and posttectonic phases, are products of the orogenies, and are the principal new ingredients making up the craton. Gneiss domes were a significant part of these cratonization orogenies. In association with orogenic crustal heating, some of the low-density, more silicic tonalitic and trondhjemitic rocks of the primary crust rose as gneiss domes. Partial melting in the middle or lower crust below the gneiss domes produced large volumes of granitic magma that intruded the gneiss domes as granodioritic batholiths. The Ablah Group and the older part of the granitic suite are about 775 to 740 Ma old and are associated with the Ablah orogeny and early cratonization in the western and earlier formed half of the shield. The Murdama (Shammar) Group and the younger part of the granitic suite are about 660 to 580 Ma old and are associated with the culminant orogeny and late cratonization that was shieldwide. The granitic suite during both orogenies consists of early, syntectonic granodiorite batholiths associated with the gneiss domes and late, posttectonic monzogranite plutons. Only during the culminant orogeny, late magmatic evolution produced syenogranite and alkali-feldspar granite commonly in circular and ring-structured plutons and with associated explosive volcanic deposits (Shammar Group); final products, some of which have economic potential, were peralkalic and peraluminous. The late plutonism of the culminant orogeny was distinctly bimodal in that subordinate gabbroic rocks are associated with the granites. Various building blocks or terranes of the andesitic and dioritic primary crust were collisionally agglomerated during the Ablah orogeny, early cratonization, whereas the entire shield as currently exposed was further collisionally accreted and compressionally consolidated during the culminant orogeny, final cratonization. Thousands of kilometers of oceanic crust had to be subducted in about 300 m.y. to form the large primary crust of the Arabian Shield. The inevitable collisional events during consumption of such a large volume of oceanic crust invariably led to numerous collisional orogenies that collectively encompass the widely known Pan African tectonic episode. The youngest lithostratigraphic sequence, the Jubaylah Group, is essentially postcratonic, although it is the end product of the collisional culminant orogeny. Final east-west compression of the entire shield from about 580 to 560 m.y. caused the craton to fracture along the large northwest-trending, left-lateral faults and elsewhere along lesser, northeast-trending, right-lateral, conjugate faults of the N ajd fault system. Erosional products of this more localized deformation were the sedimentary rocks of the Jubaylah Group, which also includes intercalated andesitic to basaltic volcanic rocks of a mafic alkalic compositional trend. The collisional edge of an old continental plate (or tectonic fragments thereof), suspected on the eastern edge of the Arabian Shield, has not been shown with certainty to be exposed. Presumably, widespread contamination from such an old continental crust affects U/Pb, Sm/Nd, Rb/Sr, and common lead ratios in the young plutonic rocks of the easternmost shield. One mass of anorthosite near Jabal Khida' on the central eastern edge of the shield may be a fragment of this old continental plate in that associated granodiorite may be as old as 1,600 to 1,800 Ma. Epeirogenic uplift, erosion, and cooling of the uppermost shield during Early and Middle Cambrian time is indicated by an average fission track age of 510±52 m.y., on sphene from diorite (hornblende K-Ar age of 615±12 m.y.) in the southwestern part of the shield. The hiatus was followed by extensive deposition of the Cambro-Ordovician Saq Sandstone in the north and northeast and the Wajid Sandstone in the southeast and south of the shield. The Cambrian Siq Sandstone had already been deposited in the northern part. During the middle and late Paleozoic, broad epeirogeny caused further erosion of the shield until marine transgression deposited the Upper Permian Khuff Formation at least in the eastern part of the shield. In the southwestern shield, the nonmarine Upper Triassic Khums Sandstone was deposited variably on Wajid or Precambrian rocks and is overlain by limestone of the middle Upper Jurassic Amran Formation. Except for shallow marine sandstone of problematic Cretaceous age deposited on the Amran Formation in the south.western shield and on Precambrian rocks in the northwestern shield, the younger beds on the shield are Paleocene and younger, with the possibility that the lowermost are upper Maestrichtian. The early Tertiary beds contain vertebrate fossils of coastal marine or estuarine environment 250 km east of the Red Sea in the central shield. Marginal marine sediments were deposited in a western tongue of the latest Tethys Sea as late as Eocene on the western shield and at least as far south as Jiddah. The great harrats of flood basalt erupted on th~ western shield during late Oligocene and early Miocene at the same time a 2,000-kmlong continental rift valley developed along the future Red Sea axis. Within this rift valley, Baid freshwater tuffaceous lakebeds were deposited between mafic and silicic volcanoes. During late early Miocene time, the Red Sea opened at a rate of 4.4 cm/yr in a firststage movement while continental dikes and swarms of oceanic tholeiitic dikes, gabbro, and granophyre plutonic rocks were intruded into the rift sedimentary and volcanic rocks at the newly formed continental margin. The continental margin was deformed and greatly extended at this time. About 14 or 15 m.y., as the first-stage spreading stopped, the Red Sea Escarpment rose; its erosion caused deposition of coarse conglomerate of the Bathan Formation. About 3,000 m of evaporite was deposited on the young Red Sea oceanic crust during the late Miocene desiccation crisis. A second stage of sea-floor spreading about 4-5 m.y. produced the Red Sea axial trough, consisting of oceanic crust, as well as renewed uplift and tilting of the three tectonic provinces in response to compression from counterclockwise rotation against the Dead Sea Rift. This late movement caused widespread major stream capture, especially along the wadis that formerly drained southwesterly or northwesterly, the channels turning westward through narrow gorges to the coastal plain and the Red Sea.

Professional Paper

Reconnaissance geologic map of the Kuskokwim Bay region, southwest Alaska

The rocks of the map area range from Proterozoic age metamorphic rocks of the Kanektok metamorphic complex (Kilbuck terrane) to Quaternary age mafic volcanic rocks of Nunivak Island. The map area encompasses much of the type area of the Togiak-Tikchik Complex. The geologic maps used to construct this compilation were, for the most part, reconnaissance studies done in the time period from the 1950s to 1990s. Pioneering work in the map area by J.M. Hoare and W.L. Coonrad forms the basis for much of this map, either directly or as the stepping off point for later studies compiled here. Physiographically, the map area ranges from glaciated mountains, as much as 1,500 m high, in the Ahklun Mountains to the coastal lowlands of northern Bristol Bay and the Kuskokwim River delta. The mountains and the finger lakes (drowned fiords) on the east have been strongly affected by Pleistocene and Holocene glaciation. Within the map area are a number of major faults. The Togiak-Tikchik Fault and its extension to the northeast, the Holitna Fault, are considered extensions of the Denali fault system of central Alaska. Other sub-parallel faults include the Golden Gate, Sawpit, Goodnews, and East Kulukak Faults. Northwest-trending strike-slip faults crosscut and offset northeast-trending fault systems. Rocks of the area are assigned to a number of distinctive lithologic packages. Most distinctive among these packages are the high-grade metamorphic rocks of the Kanektok metamorphic complex or Kilbuck terrane, composed of a high-grade metamorphic orthogneiss core surrounded by greenschist and amphibolite facies schist, gneiss, and rare marble and quartzite. These rocks have yielded radiometric ages strongly suggestive of a 2.05 Ga emplacement age. Poorly known Paleozoic rocks, including Ordovician to Devonian and Permian limestone, are found east of the Kanektok metamorphic complex. A Triassic(?) ophiolite complex is on the southeast side of Kuskokwim Bay; otherwise only minor Triassic rock units are known. The most widespread rocks of the area are Jurassic and Early Cretaceous(?) volcanic and volcaniclastic rocks. The Kuskokwim Group flysch is restricted largely to the northeast part of the map area. It consists primarily of shelf and minor nearshore facies rocks. Primarily exposed in the lowlands west of the Ahklun Mountains, extensive latest Tertiary and Quaternary alkalic basalt flows and lesser pyroclastic rocks form much of the bedrock of the remaining area. On Saint Matthew Island, Cretaceous volcanic and pyroclastic rocks occur that are not found elsewhere within the map area. The Kuskokwim Group and older rocks, including on Saint Matthew Island, but not the Kanektok metamorphic complex, are intruded by widely dispersed Late Cretaceous and (or) Early Tertiary granitic rocks. Much of the lowland area is mantled by unconsolidated deposits that include glacial, alluvial and fluvial, marine, estuarine, and eolian deposits. These formed during several episodes of Quaternary glaciation.

Alaska

Geologic map of the Fish Creek Reservoir 7.5' quadrangle, Blaine County, Idaho

The Fish Creek Reservoir quadrangle in south-central Idaho lies on the north-central margin of the Cenozoic Snake River Plain at the southern end of the Pioneer Mountains. Rocks exposed in the quadrangle range in age from Paleozoic through Cenozoic. Mesozoic rocks are absent. Though Triassic and Jurassic sedimentary rocks may have been deposited in this area, they have been removed by erosion following uplift and thrusting of the Late Cretaceous to early Tertiary Sevier orogeny. The Late Devonian to Early Mississippian Antler orogeny preceded the Sevier. Ordovician through Devonian rocks of western-derived shale and sandstone facies and eastern carbonate shelf facies are unconformably overlain respectively by Pennsylvanian-Permian Wood River and Mississippian Copper Basin Formations. These two sequences are exposed in structural windows juxtaposed by the Sevier-age Pioneer thrust fault. Interpretive cross-sections accompany the map. Volcanic rocks of the Eocene Challis Volcanic Group, Miocene Idavada Volcanics, and Pleistocene Snake River Group cover parts of the area that remains tectonically active.

Idaho

Geologic map of the Ferncliff and Louisa quadrangles, Louisa, Fluvanna, and Goochland Counties, Virginia

The area encompassed by the geologic map of the Ferncliff and Louisa, Va., 7.5-minute quadrangles includes the hypothetical surface projection of the Quail fault, which is the subsurface fault that was responsible for the 2011 magnitude 5.8 (M5.8) Mineral, Va., earthquake. The mapping shows that the Quail fault appears to have reactivated the Harris Creek fault, a Paleozoic fault that has been mapped and named in the study area and marks the boundary between the Ellisville pluton neck and Chopawamsic Formation. The Harris Creek fault was also reactivated in the early Mesozoic. Another result of the mapping is a well-defined, southwest to northeast, narrow zone of metagraywacke and ultramafic rocks (both part of the informal Shores complex) that marks the closure of a small ocean basin and the accretion of the 468- to 460-Ma (mega-annum) Ordovician Chopawamsic volcanic arc (part of the Carolina terrane) onto Laurentia. The accretion zone is truncated by the Ordovician-Silurian (444 Ma) Ellisville pluton; the 444-Ma age of the pluton therefore represents the minimum age of the accretion zone and indicates likely closure of the ocean basin during the Taconic orogeny. Across the map area, the metamorphic grade ranges from lower-greenschist facies in the northwest to amphibolite facies in the southeast. 40 Ar/ 39 Ar age-dating across this metamorphic gradient indicates that Taconic metamorphism was overprinted by late-Paleozoic Alleghanian metamorphism that was accompanied by refolding and faulting of Taconic structures. Quaternary terraces mapped along the South Anna River record a long history of incision and downcutting. A continuing question is how much of this downcutting was a result of neotectonic uplift in the central Virginia seismic zone. This report consists of a single geologic map sheet and an online geographic information systems database that includes bedrock geologic unit contacts and polygons, surficial geologic polygons, faults, and structural geologic information.

Virginia

Bedrock geologic map of the Springfield 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the 7.5- by 15-minute Springfield quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the eastern side of the Chester dome. The Moretown slice structurally overlies the Chester dome along the Keyes Mountain thrust fault which represents the Ordovician Taconic suture (Red Indian Line) between Laurentian and Ganderian crust. The allochthonous Cambrian through Ordovician Moretown slice includes the Moretown and Cram Hill Formations and the North River Igneous Suite. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the Moretown slice. Ordovician to Silurian and Devonian metasedimentary and meta-igneous rocks of the New Hampshire sequence structurally overlie the CVT along the Devonian, Acadian Monroe thrust fault. The oldest part of the New Hampshire sequence consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Bronson Hill arc including the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The Ammonoosuc Volcanics are the base of the exposed arc section in the map area. The Bronson Hill arc rocks are exposed in fault-bounded structural belts, including the Monroe thrust sheet, the Claremont belt, the Sugar River and Unity domes, and the footwall of the Brennan Hill thrust fault. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the Bronson Hill arc rocks. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Devonian, Acadian F 1 fold nappes have a sheath fold geometry and are truncated by multiple generations of faults. The Bronson Hill arc structurally overlies the CVT along the Acadian Monroe fault with preserved tectonic mélange in the footwall. Upright dome-stage F 2 folds post-date amphibolite facies metamorphism and locally developed into sheath folds in high-strain zones. F 3 folds exhibit sinistral rotation associated with Alleghanian lower-greenschist facies faults. Late Paleozoic Alleghanian to Mesozoic shear zones transpose stratigraphy, early structures, and peak metamorphic isograds. 40 Ar/ 39 Ar white-mica growth ages (300–250 million years before present [Ma]) indicate that retrograde deformation continued into the latest Paleozoic and earliest Mesozoic. Apatite fission track data show that brittle faults were active prior to about 100 Ma and experienced Late Cretaceous and even Paleocene re-activation. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Springfield 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, and structural geologic information. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references cited, two cross sections from the geologic map on sheet 1, a tectonic map showing major structural features, and a structural domain map showing the orientation of brittle features.

New Hampshire, Vermont

Regional evaluation of the hydrogeologic framework, hydraulic properties, and chemical characteristics of the intermediate aquifer system underlying southern west-central Florida

Three major aquifer systems-the surficial aquifer system, the intermediate aquifer system, and the Floridan aquifer system-are recognized in the approximately 5,100-square-mile southern west-central Florida study area. The principal source of freshwater for all uses is ground water supplied from the three aquifer systems. Ground water from the intermediate aquifer system is considered only moderately abundant compared to the Upper Floridan aquifer, but it is an important source of water where the Upper Floridan aquifer contains water too mineralized for most uses. In the study area, the potential ground-water resources of the intermediate aquifer system were evaluated by regionally assessing the vertical and lateral distribution of hydrogeologic, hydraulic, and chemical characteristics. Although the intermediate aquifer system is considered a single entity, it is composed of multiple water-bearing zones separated by confining units. Deposition of a complex assemblage of carbonate and siliciclastic sediments during the late Oligocene to early Pliocene time resulted in discontinuities that are reflected in transitional and abrupt contacts between facies. Discontinuous facies produce water-bearing zones that may be locally well-connected or culminate abruptly. Changes in the depositional environment created the multilayered intermediate aquifer system that contains as many as three zones of enhanced water-bearing capacity. The water-bearing zones consist of indurated limestone and dolostone and in some places unindurated sand, gravel, and shell beds, and these zones are designated, in descending order, as Zone 1, Zone 2, and Zone 3. Zone 1 is thinnest (<80 feet thick) and is limited to <20 percent (southern part) of the study area. Zone 2, the only regionally extensive zone, is characterized by moderately low permeability. Zone 3 is found in about 50 percent of the study area, has the highest transmissivities, and generally is in good hydraulic connection with the underlying Upper Floridan aquifer. In parts of the study area, particularly in southwestern Hillsborough County and southeastern De Soto and Charlotte Counties, Zone 3 likely is contiguous with and part of the Upper Floridan aquifer. Transmissivity of the intermediate aquifer system ranges over five orders of magnitude from about 1 to more than 40,000 feet squared per day (ft2/d), but rarely exceeds 10,000 ft2/d. The overall transmissivity of the intermediate aquifer system is substantially lower (2 to 3 orders of magnitude) than the underlying Upper Floridan aquifer. Transmissivity varies vertically among the zones within the intermediate aquifer system; Zone 2 has the lowest median transmissivity (700 ft2/d), Zone 1 has a moderate median transmissivity (2,250 ft2/d), and Zone 3 has the highest median transmissivity (3,400 ft2/d). Additionally, the transmissivity varies geographically (from site to site) within a zone. Specifically, a region of relatively low transmissivity (<100 ft2/d) throughout the vertical extent of the intermediate aquifer system is present in the central part of the study area. This low transmissivity region is encompassed by a larger region of moderately low transmissivity (<1,000 ft2/d) that covers a large part of the study area. Clay beds and fine-grained carbonates form the confining units between the water-bearing zones and are characterized by low leakance. Leakance through the intermediate aquifer system confining units ranges over 4 orders of magnitude from 4.2x10-7 to 6.0x10-3 feet per day per foot [(ft/d)/ft]. Despite the large range, the geometric mean and median leakances of individual confining units are within the same order of magnitude, 10-5 (ft/d)/ft, which is 2 orders of magnitude less than the median leakance of the semiconfining unit within the Upper Floridan aquifer. Major ion concentrations in water from the intermediate aquifer system, and throughout the ground-water flow system, generally increase with depth. T

Scientific Investigations Report

Bathymetric and underwater video survey of Lower Granite Reservoir and vicinity, Washington and Idaho, 2009-10

The U.S. Geological Survey conducted a bathymetric survey of the Lower Granite Reservoir, Washington, using a multibeam echosounder, and an underwater video mapping survey during autumn 2009 and winter 2010. The surveys were conducted as part of the U.S. Army Corps of Engineer's study on sediment deposition and control in the reservoir. The multibeam echosounder survey was performed in 1-mile increments between river mile (RM) 130 and 142 on the Snake River, and between RM 0 and 2 on the Clearwater River. The result of the survey is a digital elevation dataset in ASCII coordinate positioning data (easting, northing, and elevation) useful in rendering a 3&times;3-foot point grid showing bed elevation and reservoir geomorphology. The underwater video mapping survey was conducted from RM 107.73 to 141.78 on the Snake River and RM 0 to 1.66 on the Clearwater River, along 61 U.S. Army Corps of Engineers established cross sections, and dredge material deposit transects. More than 900 videos and 90 bank photographs were used to characterize the sediment facies and ground-truth the multibeam echosounder data. Combined, the surveys were used to create a surficial sediment facies map that displays type of substrate, level of embeddedness, and presence of silt.

Washington;Idaho

Simulated ground-water flow in the Hueco Bolson, an alluvial-basin aquifer system near El Paso, Texas

The neighboring cities of El Paso, Texas, and Ciudad Juarez, Chihuahua, Mexico, have historically relied on ground-water withdrawals from the Hueco Bolson, an alluvial-aquifer system, to supply water to their growing populations. By 1996, ground-water drawdown exceeded 60 meters in some areas under Ciudad Juarez and El Paso. A simulation of steady-state and transient ground-water flow in the Hueco Bolson in westernmost Texas, south-central New Mexico, and northern Chihuahua, Mexico, was developed using MODFLOW-96. The model is needed by El Paso Water Utilities to evaluate strategies for obtaining the most beneficial use of the Hueco Bolson aquifer system. The transient simulation represents a period of 100 years beginning in 1903 and ending in 2002. The period 1903 through 1968 was represented with 66 annual stress periods, and the period 1969 through 2002 was represented with 408 monthly stress periods. The ground-water flow model was calibrated using MODFLOWP and UCODE. Parameter values representing aquifer properties and boundary conditions were adjusted through nonlinear regression in a transient-state simulation with 96 annual time steps to produce a model that approximated (1) 4,352 water levels measured in 292 wells from 1912 to 1995, (2) three seepage-loss rates from a reach of the Rio Grande during periods from 1979 to 1981, (3) three seepage-loss rates from a reach of the Franklin Canal during periods from 1990 to 1992, and (4) 24 seepage rates into irrigation drains from 1961 to 1983. Once a calibrated model was obtained with MODFLOWP and UCODE, the optimal parameter set was used to create an equivalent MODFLOW-96 simulation with monthly temporal discretization to improve computations of seepage from the Rio Grande and to define the flow field for a chloride-transport simulation. Model boundary conditions were modified at appropriate times during the simulation to represent changes in well pumpage, drainage of agricultural fields, and channel modifications of the Rio Grande. The model input was generated from geographic information system databases, which facilitated rapid model construction and enabled testing of several conceptualizations of hydrogeologic facies boundaries. Specific yield of unconfined layers and hydraulic conductance of Quaternary faults in the fluvial facies were the most sensitive model parameters, suggesting that ground-water flow is impeded across the fault planes.

Water-Resources Investigations Report

Regional geohydrology of the northern Louisiana salt-dome basin, part II, geohydrologic maps of the Tertiary aquifers and related confining layers

Regional geohydrologic maps show the altitude of the base and the thickness of the aquifers of Tertiary age and related confining layers in the northern Louisiana salt-dome basin. The limit of freshwater in aquifers is also shown. The basin has an area of about 3,000 square miles, and four geologic units of Tertiary age contain regional aquifers. From oldest (deepest) to youngest, the aquifers are in the Wilcox Group, Carrizo Sand, Sparta Sand, and Cockfield Formation. As the Wilcox is hydraulically interconnected with the overlying Carrizo, they are treated as one hydrologic unit, the Wilcox-Carrizo aquifer. The aquifers are separated by confining layers that retard water movement. In the northwestern part of the area, the Wilcox-Carrizo aquifer is separated from the underlying sand facies of the Nacatoch Sand (Cretaceous age) by a confining layer composed of the Midway Group (Tertiary age) and the underlying Arkadelphia Marl and an upper clay and marl facies of the Nacatoch Sand (both of Cretaceous age). In the remainder of the area, the Wilcox-Carrizo aquifer is separated from an underlying Cretaceous aquifer comprised of the Tokio Formation and Brownstown Marl by the Midway Group and several underlying Cretaceous units which in order of increasing age are the Arkadelphia Maril, Nacatoch Sand, Saratoga Chalk, Marlbrook Marl , and Annona Chalk. The Wilcox-Carrizo aquifer is separated from the Sparta aquifer by the overyling Cane River Formation. The Sparta aquifer is separated from the Cockfield aquifer by the overlying Cook Mountain Formation.

Louisiana

Chemical evolution and estimated flow velocity of water in the Trinity Aquifer, south-central Texas

Three permeable zones with varying lithology and water chemistry compose the Trinity aquifer, a principal source of water in the 5,500- square-mile study area in south-central Texas. The upper permeable zone locally yields small quantities of water to wells and was not included in this study. The middle permeable zone primarily is composed of limestone with minor amounts of dolostone. Terrigenous sand and marine limestone, with minor amounts of dolostone, are the principal lithologic units in the lower permeable zone. Dissolved solids concentrations range from 329 to 1,820 milligrams per liter in water samples from the middle permeable zone and from 518 to 3,030 milligrams per liter in water samples from the lower permeable zone. Principal hydrochemical facies in the middle permeable zone are calcium magnesium bicarbonate and calcium magnesium sulfate. Hydrochemical facies in ground-water samples from the lower permeable zone vary. Tritium concentrations as large as 5.3 tritium units in the southeastern part of the study area are indicative of relatively recent recharge. Results of a geochemical mass balance simulation along a flowpath in the middle permeable zone indicate a mass transfer of 4.25 millimoles per liter of dolomite dissolved, 5.74 millimoles per liter of gypsum dissolved, 0.46 millimole per liter of sodium chloride dissolved, 8.07 millimoles per liter of calcite precipitated, and 0.67 millimole per liter of calcium-for-sodium cation exchange between solid and aqueous phases. These results support dedolomitization as a principal chemical process in the middle permeable zone of the Trinity aquifer. Results of a simulation along a flowpath in the lower permeable zone indicate a mass transfer of 0.41 millimole per liter of dolomite dissolved, 0.001 millimole per liter of gypsum dissolved, 9.58 millimoles per liter of sodium chloride dissolved, 1.09 millimoles per liter of calcite precipitated, and 1.11 millimoles per liter of sodium-forcalcium cation exchange between solid and aqueous phases. Lower permeable zone processes indicate sodium chloride dissolution, dedolomitization, and cation exchange. Ground-water-flow velocities determined from adjusted carbon-14 ages, calculated using NETPATH, for selected flowpaths in the middle and lower permeable zones were about 1.7 feet per year and less than about 4.4 feet per year, respectively.

Texas

Geologic characterization and depositional history of the Uteland Butte member, Green River Formation, southwestern Uinta Basin, Utah

The 15- to 65-m-thick informal Uteland Butte member of the Eocene Green River Formation represents the first widespread transgression of Lake Uinta in the Uinta Basin, Utah. This study assesses the spatial and temporal variation of Uteland Butte member deposits along a 40-km transect in the southwestern margin of the Uinta Basin using detailed measured sections, organic and inorganic geochemical data, and outcrop gamma ray logs. Fourteen lithofacies are identified, which comprise seven facies associations linked to with lacustrine, palustrine, and deltaic depositional settings. Facies associations are traceable laterally across the study area, where five 4- to 12-m-thick depositional cycles are identified. Each shallowing upwards cycle is defined by a >1.5-m-thick basal package of organic-rich, argillaceous laminated mudstone, and is capped by thick packages of bedded carbonate. In the far western study area (Kyune Creek Canyon), thick deposits of organic-rich mudstone are present and represent the most distal outcrop section; time-equivalent strata in the eastern study area (Minnie Maud Creek Canyon) are relatively organic lean with higher silt and clay content, interpreted to represent proximal lake margin deposits influenced by a nearby delta. The outcrop belt is correlated to more distal cores and well logs across the western Uinta Basin. Similar lithological and petrophysical patterns across the western Uinta Basin are used to subdivide stratigraphy into nine laterally contiguous sub-units based on nomenclature from the oil-producing area of the central basin (from base to top: lower Uteland Butte, D Bench, D Shale, C Bench, C Shale, B Bench, B Shale, A Bench, and A Shale). Siliciclastic clay-rich and carbonaterich intervals are correlated across the region and indicate distinct siliciclastic- and carbonate-dominated lake phases during Uteland Butte member deposition. Climate is interpreted to be the dominant driver of these claycarbonate cycles, in which relatively humid periods resulted in increased fluvially derived siliciclastic sediment into the basin (clay-rich periods), and arid periods resulted in evaporative conditions with decreased fluvial sediment input that favor carbonate accumulation. Climatically driven depositional cycles within the Uteland Butte member reflect, to a smaller degree, the larger scale climatically driven depositional cycles observed at the member- and formation levels of Paleocene and Eocene Uinta Basin stratigraphy. Importantly, the Uteland Butte member clay-carbonate cycles showcase how relatively small-scale climate shifts can impact basin-scale lacustrine deposition.

Utah