Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Developments in Water Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28Linked to original sources
USGS2010

EAARL Coastal Topography-Maryland and Delaware, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Maryland and Delaware coastline beachface, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2010

Tapping environmental history to recreate America's colonial hydrology

Throughout American history water resources have played integral roles in shaping patterns of human settlement and networks of biological and economic exchange. In turn, humans have altered hydrologic systems to meet their needs. A paucity of climate and water discharge data for the seventeenth and eighteenth centuries, however, has left America's preindustrial hydrology largely unstudied. As a result, there have been few detailed, quantifiable, regional assessments of hydrologic change between the time of first European settlement and the dawn of industrial expansion. As scientists labor to understand present-day hydrologic systems and make predictions about the future, the value of expanding the geographic (1, 2) and temporal scopes (3, 4) of their studies has become increasingly evident. Pollen and tree-ring analyses have helped shed light on past climate and land-use patterns. But other nonscientific sources and methods can be equally revealing and in some cases complement empirical studies (5). This paper argues that environmental science, particularly that concerned with the human dimensions of water resources, stands to profit from using historical literature and archival sources. By considering work in environmental history, forging closer working relationships between the geophysical and social sciences, and seriously entertaining narratives as a form of evidence, environmental scientists can not only look farther into the past and across broader geographic areas, but they can also more accurately describe the nuances and complexities that define the ways humans have changed the world around them. In this paper, we present the recommendations of a multidisciplinary summer institute that developed 1) a conceptual and methodological framework for conducting historical hydrology, and 2) suggestions for ways that historical information can be used to inform the hydrologic sciences. Our intent here is to encourage further work along these or similar lines. We believe that future efforts that build on our famework and draw and expand upon the sources referenced below will produce scholarship of great utility to both environmental and social sciences.

Environmental Science & Technology↗
USGS2023

Simulation of future streamflow and irrigation demand based on climate and urban growth projections in the Cape Fear and Pee Dee River Basins, North Carolina and South Carolina, 2055–65

Water resources in the coastal region of North Carolina and South Carolina (Coastal Carolinas) are currently under stress from competing ecological and societal needs. Projected changes in climate and population are expected to place even more stress on water resources in the region. The Coastal Carolinas Focus Area Study was initiated by the U.S. Geological Survey Water Availability and Use Science Program’s National Water Census to investigate these stressors and their effects on water resources for the Coastal Carolinas. As part of that study, the Soil and Water Assessment Tool (SWAT) model was used to investigate future streamflow and irrigation demand under six scenarios for the Cape Fear and Pee Dee River Basins, which flow through the Coastal Carolinas and into the Atlantic Ocean. For each river basin, historical (2000 through 2014) Soil and Water Assessment Tool models were minimally calibrated, and future (2055 through 2065) scenario models were developed based on three alternative global climate models, two alternative urban growth projections, and water-use projections that correspond to each global climate model and urban growth projection pair. The river basins were delineated into 2,928 and 5,678 subbasins for the Cape Fear and Pee Dee, respectively, each approximately 2.6 square miles (mi 2 ) in size. The best available water-use and wastewater discharge data were used for historical model calibration. The models simulated monthly mean streamflow with median Nash-Sutcliffe efficiency values of 0.53 (n = 36) and 0.61 (n = 33) in the Cape Fear and Pee Dee River Basins, respectively. Average percent bias was −4.8 percent for the Cape Fear River Basin and −1.2 percent for the Pee Dee River Basin. Catchments for streamgages chosen for model calibration that were small (less than 100 mi 2 ) to medium (100–1,000 mi 2 ) in area tended to perform better than larger catchments (greater than 1,000 mi 2 ). Historical models were used to develop future model scenarios by replacing historical weather, land-use, and water-use input datasets with projected datasets. One small, gaged catchment was selected to illustrate how the models can be used to evaluate the relative differences in simulated streamflow resulting from alternative global climate models and urban growth projections. For the selected catchment, future climate projections had a much greater influence on simulated streamflow than urban growth projections. Simulated cumulative monthly mean streamflow results for this catchment differed by 26 percent under alternative global climate models and differed by 2.4 percent under alternative urban growth projections. Irrigation demand was modeled for subbasins with cropland. Simulated differences in irrigation demand were more pronounced and widespread across the model domain under the alternative future climate scenarios compared to alternative urban growth scenarios. The calibrated and future scenario models have the capability to run on a daily time step and simulate streamflow and irrigation demand for thousands of small subbasins in the Cape Fear and Pee Dee River Basins. The models and underlying datasets enable future analyses for large and small areas within the basins.

North Carolina, South Carolina↗
USGS2011

Isotopically modified nanoparticles for enhanced detection in bioaccumulation studies

This work presents results on synthesis of isotopically enriched (99% 65 Cu) copper oxide nanoparticles and its application in ecotoxicological studies. 65 CuO nanoparticles were synthesized as spheres (7 nm) and rods (7 × 40 nm). Significant differences were observed between the reactivity and dissolution of spherical and rod shaped nanoparticles. The extreme sensitivity of the stable isotope tracing technique developed in this study allowed determining Cu uptake at exposure concentrations equivalent to background Cu concentrations in freshwater systems (0.2–30 μg/L). Without a tracer, detection of newly accumulated Cu was impossible, even at exposure concentrations surpassing some of the most contaminated water systems (>1 mg/L).

Environmental Science & Technology↗
USGS2021

Implementation plan for the southern Pacific Border and Sierra-Cascade Mountains provinces

Introduction The National Cooperative Geologic Mapping Program (NCGMP) is publishing a strategic plan titled Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge (Brock and others, in press). The plan provides a vision, mission, and goals for the program during the years 2020–2030, which are: Vision .—Create an integrated, three-dimensional, digital geologic map of the United States. Mission .—Characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal .—Focus on geologic mapping as a core function of the U.S. Geological Survey (USGS) within the long-term vision of adequately mapping the Nation’s geologic framework in three dimensions. In order to achieve the goals outlined in the strategic plan, the NCGMP has developed an implementation plan. This plan will guide the annual review of projects carried out by USGS staff (FEDMAP) described in the plan and the development of the annual FEDMAP prospectus that will ensure the effective application of the NCGMP strategy. This publication describes the implementation plan of the NCGMP strategy for the southern Pacific Border and Sierra-Cascade Mountains provinces, as defined by Fenneman (1917, 1928, and 1946). This implementation plan focuses on the geology of California and a sliver of Nevada surrounding Lake Tahoe. The southern Pacific Border and Sierra-Cascade Mountains provinces encompass the varied landscapes of the high Sierra Nevada, the Central Valley, and Coast Ranges in northern and central California and the Peninsular Ranges, Continental Borderland, Los Angeles Basin-San Gabriel-San Bernardino valleys, western and central Transverse Ranges, and northernmost Salton Trough in southern California. Societal demands create a need for earth-science data in each of these landscapes. The broader San Francisco Bay area, Central Valley, Los Angeles-San Gabriel-San Bernardino lowlands, and the coastal lowlands that border the Peninsular Ranges are densely populated (about 30 million people) areas at high risk of natural hazards. The mountains of the Sierra Nevada, Peninsular Ranges, and Transverse Ranges, and the coast all provide numerous recreational opportunities that attract visitors from around the world, whereas previously these ranges attracted people to mine their resources. The agricultural capacity of the Central Valley is a critical resource for the Nation that is increasingly water limited. The southern. Pacific Border and Sierra-Cascade Mountains provinces, at the edge of the North American continent, were profoundly influenced by subduction zone tectonics during the Mesozoic and early Cenozoic (ongoing in northernmost California) and subsequently by the inception, development, and present activity of the San Andreas transform margin system. Although the geology of this region is the poster child of fundamental conceptual models of subduction zone complexes, forearc basins, ophiolite obductions, magmatic arcs, and suspect terranes, as well as hosting one of Earth’s most notorious continental transform faults—the San Andreas Fault—important questions that have important societal consequences remain to be answered. Most of California’s population reside in these provinces and live within 30 miles of an active fault (according to www.earthquakeauthority.com ) yet new faults continue to be discovered, highlighting the importance of deformation off the main San Andreas Fault. Bedrock, surficial, and three-dimensional (3D) geologic maps depicting stratigraphic structure and depth to crystalline basement rocks provide critical context and information for understanding fault rupture, distributed deformation, fault connectivity, and history in addition to providing crucial data that enable forecasting of shaking amplitude and length from hypothetical earthquake scenarios. The tectonic evolution of California produced not only stunning mountains, with associated hazards from landslides and active volcanoes, but also fertile valleys that make California the top agricultural producer in the country in terms of cash receipts (according to www.ers.usda.gov/faqs ). These valleys lie atop large basins that not only store groundwater but, in many cases, host oil and gas fields, contributing to the fourth highest hydrocarbon production by State in the country in 2016 (according to https://www.aei.org/carpe-diem/animated-chart-of-us-oil-production-by-state-1981-2017 ). Water is a key resource increasingly stressed by growing agricultural, industrial, and residential needs. Warmer and drier conditions have led to an increased reliance on extracting groundwater resources, whose availability and quality are dictated at the first order by the 3D spatial distribution of bedrock and Quaternary surficial deposits. Thus, assessment of this critical resource is inextricably tied to knowledge of the surficial and subsurface geologic structure and material types.

California, Nevada↗
USGS2010

Water-the Nation's Fundamental Climate Issue A White Paper on the U.S. Geological Survey Role and Capabilities

Of all the potential threats posed by climatic variability and change, those associated with water resources are arguably the most consequential for both society and the environment (Waggoner, 1990). Climatic effects on agriculture, aquatic ecosystems, energy, and industry are strongly influenced by climatic effects on water. Thus, understanding changes in the distribution, quantity and quality of, and demand for water in response to climate variability and change is essential to planning for and adapting to future climatic conditions. A central role of the U.S. Geological Survey (USGS) with respect to climate is to document environmental changes currently underway and to develop improved capabilities to predict future changes. Indeed, a centerpiece of the USGS role is a new Climate Effects Network of monitoring sites. Measuring the climatic effects on water is an essential component of such a network (along with corresponding effects on terrestrial ecosystems). The USGS needs to be unambiguous in communicating with its customers and stakeholders, and with officials at the Department of the Interior, that although modeling future impacts of climate change is important, there is no more critical role for the USGS in climate change science than that of measuring and describing the changes that are currently underway. One of the best statements of that mission comes from a short paper by Ralph Keeling (2008) that describes the inspiration and the challenges faced by David Keeling in operating the all-important Mauna Loa Observatory over a period of more than four decades. Ralph Keeling stated: 'The only way to figure out what is happening to our planet is to measure it, and this means tracking changes decade after decade and poring over the records.' There are three key ideas that are important to the USGS in the above-mentioned sentence. First, to understand what is happening requires measurement. While models are a tool for learning and testing our understanding, they are not a substitute for observations. The second key idea is that measurement needs to be done over a period of many decades. When viewing hydrologic records over time scales of a few years to a few decades, trends commonly appear. However, when viewed in the context of many decades to centuries, these short-term trends are recognized as being part of much longer term oscillations. Thus, while we might want to initiate monitoring of important aspects of our natural resources, the data that will prove to be most useful in the next few years are those records that already have long-term continuity. USGS streamflow and groundwater level data are excellent examples of such long-term records. These measured data span many decades, follow standard protocols for collection and quality assurance, and are stored in a database that provides access to the full period of record. The third point from the Keeling quote relates to the notion of ?poring over the records.? Important trends will not generally jump off the computer screen at us. Thoughtful analyses are required to get past a number of important but confounding influences in the record, such as the role of seasonal variation, changes in water management, or influences of quasi-periodic phenomena, such as El Ni?o-Southern Oscillation (ENSO) or the Pacific Decadal Oscillation (PDO). No organization is better situated to pore over the records than the USGS because USGS scientists know the data, quality-assure the data, understand the factors that influence the data, and have the ancillary information on the watersheds within which the data are collected. To fulfill the USGS role in understanding climatic variability and change, we need to continually improve and strengthen two of our key capabilities: (1) preserving continuity of long-term water data collection and (2) analyzing and interpreting water data to determine how the Nation's water resources are changing. Understanding change in water resources

Circular↗
USGS2021

Chesapeake Bay: A case study in resiliency and restoration

Chesapeake Bay (“mother of waters” or the “great shellfish Bay” in Algonquin), is the largest estuary in the United States and arguably the best studied estuary in the world. Chesapeake Bay is immense, with the main stem stretching 200 nautical miles (315 km) from the mouth of the Susquehanna River to its terminus at the Atlantic Ocean and an overall watershed encompassing 64,000 mi2 (165,000 km2). The mainstem, tributaries, and Bay islands form thousands of miles of coastline (Figure 1). Because of its prominence in estuarine science and ecosystem restoration, developing a working knowledge of Chesapeake Bay science and restoration is important. Hopefully, this overview will whet the appetite to learn more from information available both in the scientific literature and on the Chesapeake Bay Program website www.chesapeakebay.net

Chesapeake Bay watershed↗
USGS2010

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2024

Need and vision for global medium-resolution Landsat and Sentinel-2 data products

Global changes in climate and land use are threatening natural ecosystems, biodiversity, and the ecosystem services people rely on. This is why it is necessary to track and monitor spatiotemporal change at a level of detail that can inform science, management, and policy development. The current constellation of multiple Landsat and Sentinel-2 satellites collecting imagery at predominantly ≤ "> ≤ 30-m spatial resolution affords an opportunity for the generation of global medium- resolution products every few days. Our goal is to both identify the information needs and provide direction towards the generation of a suite of global, high-level, systematically-generated, medium-resolution products designed for both management and science. Our vision builds on the success of the NASA MODIS/VIIRS product suite, while recognizing the unique strengths of medium-resolution satellite data given their higher spatial resolution and longer time series. We propose a suite of 13 essential products that enable the characterization of the current state and changes in the biosphere, cryosphere, and hydrosphere, and would fill information needs identified by the Committee on Earth Observation Satellites for the Global Climate Observing System and the Global Terrestrial Observing System, by the National Research Council of the US National Academies in the decadal survey, and by others. These products are: land cover, land cover change, burned area, forest loss, vegetation indices, phenology, dynamic habitat indices, albedo, land surface temperature, snow cover, ice extent, surface water extent, and evapotranspiration. Furthermore, we provide a list of desirable products poised for addition to the essential products (e.g., crop type, emissivity, and ice sheet velocity). Lastly, we suggest aspirational products requiring further algorithm development (e.g., forest structure and crop yield). For the identified essential products, algorithms are in place, making it feasible to begin generating products systematically. These products should be accompanied by quality and accuracy assessments undertaken following consensus protocols. Five decades after the first Landsat satellite, and two decades after the MODIS products were first produced, it is time now for readily available, standardized, and consistent high-level products built upon medium-resolution imagery, thereby fulfilling the promise and the vision that inspired the Landsat program since its inception.

Remote Sensing of Environment↗
USGS2010

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

Water- and sediment-quality effects on Pimephales promelas spawning vary along an agriculture-to-urban land-use gradient

Many streams in the U.S. are “impaired” due to anthropogenic influence. For watershed managers to achieve practical understanding of these impairments, a multitude of factors must be considered, including point and nonpoint-source influence on water quality. A spawning assay was developed in this study to evaluate water- and sediment-quality effects that influenced Pimephales promelas (fathead minnow) egg production over a gradient of urban and agricultural land use in 27 small watersheds in Eastern Wisconsin. Six pairs of reproducing fathead minnows were contained in separate mesh cartridges within one larger flow-through chamber. Water- and sediment quality were sampled for an array of parameters. Egg production was monitored for each pair providing an assessment of spawning success throughout the 21-day test periods. Incidences of low dissolved oxygen (DO) in many of these streams negatively impacted spawning success. Nine of 27 streams experienced DO less than 3.1 mg/L and 15 streams experienced DO less than 4.8 mg/L. Low DO was observed in urban and agricultural watersheds, but the upper threshold of minimum DO decreased with increasing urban development. An increase in specific conductance was related to a decrease in spawning success. In previous studies for streams in this region, specific conductance had a linear relation with chloride, suggesting the possibility that chloride could be a factor in egg production. Egg production was lower at sites with substantial urban development, but sites with low egg production were not limited to urban sites. Degradation of water- and sediment-quality parameters with increasing urban development is indicated for multiple parameters while patterns were not detected for others. Results from this study indicate that DO must be a high priority watershed management consideration for this region, specific conductance should be investigated further to determine the mechanism of the relation with egg production, and water- and sediment-quality degrade in relation to urban influence.

Science of the Total Environment↗
USGS1998

Results from the Mars global surveyor thermal emission spectrometer

The Thermal Emission Spectrometer spectra of low albedo surface materials suggests that a four to one mixture of pyroxene to plagioclase, together with about a 35 percent dust component provides the best fit to the spectrum. Qualitative upper limits can be placed on the concentration of carbonates (<10 percent), olivine (<10 percent), clay minerals (<20 percent), and quartz (<5 percent) in the limited regions observed. Limb observations in the northern hemisphere reveal low-lying dust hazes and detached water-ice clouds at altitudes up to 55 kilometers. At an aerocentric longitude of 224??a major dust storm developed in the Noachis Terra region. The south polar cap retreat was similar to that observed by Viking.

Science↗
USGS2020

Groundwater availability of the Northern High Plains aquifer in Colorado, Kansas, Nebraska, South Dakota, and Wyoming

Executive Summary The Northern High Plains aquifer underlies about 93,000 square miles of Colorado, Kansas, Nebraska, South Dakota, and Wyoming and is the largest subregion of the nationally important High Plains aquifer. Irrigation, primarily using groundwater, has supported agricultural production since before 1940, resulting in nearly $50 billion in sales in 2012. In 2010, the High Plains aquifer had the largest groundwater withdrawals of any major aquifer system in the United States. Nearly one-half of those withdrawals were from the Northern High Plains aquifer, which has little hydrologic interaction with parts of the aquifer farther south. Land-surface elevation ranges from more than 7,400 feet (ft) near the western edge to less than 1,100 ft near the eastern edge. Major stream primarily flow west to east and include the Big Blue River, Elkhorn River, Loup River, Niobrara River, Republican River and Platte River with its two forks—the North Platte River and South Platte River. Population in the Northern High Plain aquifer area is sparse with only 2 cities having a population greater than 30,000. Droughts across much of the area from 2001 to 2007, combined with recent (2004–18) legislation, have heightened concerns regarding future groundwater availability and highlighted the need for science-based water-resource management. Groundwater models with the capability to provide forecasts of groundwater availability and related stream base flows from the Northern High Plains aquifer were published recently (2016) and were used to analyze groundwater availability. Stream base flows are generally the dominant component of total streamflow in the Northern High Plains aquifer, and total streamflows or shortages thereof define conjunctive management triggers, at least in Nebraska. Groundwater availability was evaluated through comparison of aquifer-scale water budgets compared for periods before and after major groundwater development and across selected future forecasts. Groundwater-level declines and the forecast amount of groundwater in storage in the aquifer also were examined. Major Findings Aquifer losses to irrigation withdrawals increased greatly from 1940 to 2009 and were the largest average 2000–9 outflow (49 percent of total). Basin to basin groundwater flows were not a large part of basin water budgets. Development of irrigated land and associated withdrawals were not uniform across the Northern High Plains aquifer, and different parts of the Northern High Plains aquifer responded differently to agricultural development. For the Northern High Plains aquifer, areas with high recharge and low evapotranspiration had the most streamflow, and most streams only remove water from the aquifer. Results of a baseline future forecast indicated that groundwater levels declined overall, indicating an overdraft of the aquifer when climate was about average and agricultural development was held at the same state as 2009. Results of two human stresses future forecasts indicated that increases of 13 percent or 23 percent in agricultural development, mostly near areas of previous development, caused increases in groundwater pumping of 8 percent or 11 percent, and resulted in continued groundwater-level declines, at rates 0.3 or 0.5 million acre-feet per year larger than the baseline forecast. Results of environmental stresses forecasts (generated from two downscalings of global climate model outputs) compared with the baseline forecast indicated that even though annual precipitation was nearly the same, differences in temperature and a redistribution of precipitation from the spring to the growing season (from about May 1 through September 30), created a large (12–15 percent) decrease in recharge to the aquifer. For the two environmental stresses forecasts, temperature and precipitation were distributed about the same among basins of the Northern High Plains aquifer, but the amounts were different.

Colorado, Kansas, Nebraska, South Dakota, Wyoming↗
USGS1975

Land use and land cover, 1972, Kentucky River area development district (KRADD)

This map is a demonstration product of experiments in land use and land cover mapping using remote sensor data. The map is a joint effort of the U.S. Geological Survey's Land Use Data and Analysis (LUDA) program and the Appalachian Regional Commission. It is part of a continuing USGS Land Information and Analysis Office demonstration of multi-discipline earth science contributions to the furthering of planning objectives.

Kentucky↗
USGS2010

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2016

Will it rise or will it fall? Managing the complex effects of urbanization on base flow

Sustaining natural levels of base flow is critical to maintaining ecological function as stream catchments are urbanized. Research shows a variable response of stream base flow to urbanization, with base flow or water tables rising in some locations, falling in others, or elsewhere remaining constant. The variable baseflow response is due to the array of natural (e.g., physiographic setting and climate) and anthropogenic (e.g., urban development and infrastructure) factors that influence hydrology. Perhaps as a consequence of this complexity, few simple tools exist to assist managers to predict baseflow change in their local urban area. This paper addresses this management need by presenting a decision support tool. The tool considers the natural vulnerability of the landscape, together with aspects of urban development in predicting the likelihood and direction of baseflow change. Where the tool identifies a likely increase or decrease it guides managers toward strategies that can reduce or increase groundwater recharge, respectively. Where the tool finds an equivocal result, it suggests a detailed water balance be performed. The decision support tool is embedded within an adaptive-management framework that encourages managers to define their ecological objectives, assess the vulnerability of their ecological objectives to changes in water table height, and monitor baseflow responses to urbanization. We trial our framework using two very different case studies: Perth, Western Australia, and Baltimore, Maryland, USA. Together, these studies show how pre-development water table height, climate and geology together with aspects of urban infrastructure (e.g., stormwater practices, leaky pipes) interact such that urbanization has overall led to rising base flow (Perth) and falling base flow (Baltimore). Greater consideration of subsurface components of the water cycle will help to protect and restore the ecology of urban freshwaters.

Maryland, Western Australia↗
USGS2017

Land change monitoring, assessment, and projection (LCMAP) revolutionizes land cover and land change research

When nature and humanity change Earth’s landscapes - through flood or fire, public policy, natural resources management, or economic development - the results are often dramatic and lasting. Wildfires can reshape ecosystems. Hurricanes with names like Sandy or Katrina will howl for days while altering the landscape for years. One growing season in the evolution of drought-resistant genetics can transform semiarid landscapes into farm fields. In the past, valuable land cover maps created for understanding the effects of those events - whether changes in wildlife habitat, water-quality impacts, or the role land use and land cover play in affecting weather and climate - came out at best every 5 to 7 years. Those high quality, high resolution maps were good, but users always craved more: even higher quality data, additional land cover and land change variables, more detailed legends, and most importantly, more frequent land change information. Now a bold new initiative called Land Change Monitoring, Assessment, and Projection (LCMAP) promises to fulfill that demand. Developed at the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center in Sioux Falls, South Dakota, LCMAP provides definitive, timely information on how, why, and where the planet is changing. LCMAP’s continuous monitoring process can detect changes as they happen every day that Landsat satellites acquire clear observations. The result will be to place near real-time information in the hands of land and resource managers who need to understand the effects these changes have on landscapes.

General Information Product↗
USGS2010

EAARL Coastal Topography-Fire Island National Seashore, New York, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗