Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources
USGS2008

Fate and transport of pesticides in the ground water systems of southwest Georgia, 1993-2005

Modern agricultural practices in the United States have resulted in nearly unrivaled efficiency and productivity. Unfortunately, there is also the potential for release of these compounds to the environment and consequent adverse affects on wildlife and human populations. Since 1993, the National Water-Quality Assessment (NAWQA) program of the U.S. Geological Survey has evaluated water quality in agricultural areas to address these concerns. The objective of this study is to evaluate trends in pesticide concentrations from 1993-2005 in the surficial and Upper Floridan aquifers of southwest Georgia using pesticide and pesticide degradate data collected for the NAWQA program. There were six compounds - five herbicides and one degradate - that were detected in more than 20% of samples: atrazine, deethylatrazine (DEA), metolachlor, alachlor, floumeturon, and tebuthiuron. Of the 128 wells sampled during the study, only eight wells had pesticide concentrations that either increased (7) or decreased (1) on a decadal time scale. Most of the significant trends were increasing concentrations of pesticides in older water; median pesticide concentrations did not differ between the surficial and Upper Floridan aquifers from 1993 and 2005. Deethylatrazine, in the Upper Floridan aquifer, was the only compound that had a significant change (increase) in concentration during the study. The limited number of wells with increases in pesticide concentrations suggest that ground-water sources of these compounds are not increasing in concentration over the time scale represented in this study. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Conference Paper↗
USGS2003

Structural framework of a major intracontinental orogenic termination zone: The easternmost Tien Shan, China

The Barkol Tagh and Karlik Tagh ranges of the easternmost Tien Shan are a natural laboratory for studying the fault architecture of an active termination zone of a major intracontinental mountain range. Barkol and Karlik Tagh and lesser ranges to the north are bounded by active thrust faults that locally deform Quaternary sediments. Major thrusts in Karlik Tagh connect along strike to the east with the left-lateral Gobi-Tien Shan Fault System in SW Mongolia. From a Mongolian perspective. Karlik Tagh represents a large restraining bend for this regional strike-slip fault system, and the entire system of thrusts and strike-slip faults in the Karlik Tagh region defines a horsetail splay fault geometry. Regionally, there appears to be a kinematic transition from thrust-dominated deformation in the central Tien Shan to left-lateral transpressional deformation in the easternmost Tien Shan. This transition correlates with a general eastward decrease in mountain belt width and average elevation and a change in the angular relationship between the NNE-directed maximum horizontal stress in the region and the pre-existing basement structural grain, which is northwesterly in the central Tien Shan (orthogonal to SHmax) but more east-west in the eastern Tien Shan (acute angular relationship with SHmax . Ar-Ar ages indicate that major range-bounding thrusts in Barkol and Karlik Tagh are latest Permian-Triassic ductile thrust zones that underwent brittle reactivation in the Late Cenozoic. It is estimated that the modern mountain ranges of the extreme easternmost Tien Shan could have been constructed by only 10-15 km of Late Cenozoic horizontal shortening.

Journal of the Geological Society↗
USGS2020

Foreward: Geology Field Trips in and around the U.S. Capital

The first annual meeting of the Geological Society of America (GSA) was held in 1888 in Ithaca, New York (Fairchild, 1932), but official Sections of GSA formed much later. During the spring of 1949, a symposium in Knoxville, Tennessee, on mineral resources of the southeastern United States became the catalyst for the creation of the Southeastern Section of the Geological Society of America (King, 1964), and the first annual meeting of the Southeastern Section was held in 1952 in Roanoke, Virginia (Wilson, 1954). The Northeastern Section formed much later, and its first annual meeting was held in 1966 in Philadelphia, Pennsylvania (Socolow, 1968). At all of these section meetings, field trips have been important venues for geologists and especially students to gather together, examine rocks in the field, and discuss ideas. These field trips have been especially important at combined section meetings because they provide settings for geologists who are experienced in one geographic region to examine and compare the geology of other regions. The first combined meeting of the Southeastern and Northeastern sections occurred in 1976 in Arlington, Virginia. Since then, the Southeastern and Northeastern sections have met together on numerous occasions, including 1982 in Washington, DC; 1991 in Baltimore, Maryland; 2004 in Tysons Corner, Virginia; and 2010 in Baltimore, Maryland. Since the first combined section meeting in 1976, there has been a gradual increase in the role of technology in geology field studies. In fact, during the past several decades there has been an increase in emphasis in our society on the instrumental component of science, the goal of which is operational techniques to do or control things, and a corresponding decrease in emphasis on the natural philosophy component of science, the goal of which is a greater understanding of the natural world (Dear, 2006). The modern education acronym STEM (Science, Technology, Engineering, and Mathematics), for example, is often used as a catch-all term that implies that science and technology are relatively synonymous, and implies that greater technology leads automatically to greater understanding of the natural world. This assumption, however, is not always valid (Dear, 2006), and technology should not be promoted as a substitute for field experiences. Technology can be a tool that leads to greater understanding of the natural world, but not all Science uses technology as a means of providing greater understanding. The benefits of new technologies include: (1) data of greater resolution; and (2) greater efficiency of capturing, storing, and visualizing data. The risks of new technologies include: (1) an overabundance of data, some of which may be of little value; (2) less time available for analysis of data, if geologists become occupied primarily with capturing and storing data; and (3) errors that arise from complacency and the perception that field-checking may not be necessary. In other words, there is a risk that a glut of data and vast amounts of time devoted to the capturing and storing of data may result in a reduced interest and (or) willingness to field-check data. In the spirit of the early GSA section meetings, we feel that there are still enormous advantages to conducting geology field trips in conjunction with traditional meeting presentations and posters. In 2020, with this current combined Southeastern and Northeastern section meeting in Reston, Virginia, we have assembled eight different field trips that cover a wide range of territory in and around the Nation’s capital. These field trip localities include the immediate vicinity of Washington, DC, as well as various locations in nearby areas of Virginia, Maryland, and West Virginia. The physiographic provinces include Mesozoic Rift Basins, the Piedmont, the Blue Ridge, the Valley and Ridge, and the Allegheny Plateau of the Appalachian Basin. The field trip sites exhibit a wide range of igneous, metamorphic, and sedimentary rocks, as well as rocks with a wide range of geologic ages from the Mesoproterozoic to the Holocene. We hope that this guidebook provides new motivation for geologists to examine rocks in the field, to discuss ideas with colleagues in the field, and to avoid becoming complacent. The editors of this volume would like to thank the authors of the different field trip guides, the field trip leaders, and all of the reviewers who made suggestions for improving the field trip manuscripts. The editors would also like to thank Elle Derwent of GSA for her logistical help and guidance regarding the field trips, and April Leo and the staff of the GSA Publications Department for seeing this book through to publication.

Maryland, Virginia, West Virginia↗
USGS2008

Middle to late cenozoic geology, hydrography, and fish evolution in the American Southwest

An evaluation of the poorly understood Cenozoic hydrologic history of the American Southwest using combined geological and biological data yields new insights with implications for tectonic evolution. The Mesozoic Cordilleran orogen next to the continental margin of southwestern North America probably formed the continental divide. Mountain building migrated eastward to cause uplift of the Rocky Mountains during the Late Cretaceous to early Tertiary Laramide orogeny. Closed drainage basins that developed between the two mountain belts trapped lake waters containing fish of Atlantic affinity. Oligocene-Miocene tectonic extension fragmented the western mountain belt and created abundant closed basins that gradually filled with sediments and became conduits for dispersal of fishes of both Pacific and Atlantic affinity. Abrupt arrival of the modern Colorado River to the Mojave-Sonora Desert region at ca. 5 Ma provided a new conduit for fish dispersal. Great dissimilarities in modern fish fauna, including differences in their mitochondrial deoxyribonucleic acid (DNA), indicate that late Miocene runoff from the Colorado Plateau did not flow down the Platte or Rio Grande, or through the Lake Bonneville Basin. Fossil fishes from the upper Miocene part of the Bidahochi Formation on the Colorado Plateau have characteristics that reflect a habitat of large, swift-moving waters, and they are closely related to fossil fishes associated with the Snake and Sacramento Rivers. This evidence suggests that influx of fishes from the ancestral Snake River involved a major drainage, not merely small headwater transfers. ?? 2008 The Geological Society of America.

Conference Paper↗
USGS1950

Fifth special report of the Hawaiian Volcano Observatory of the Hawaiian Volcano Research Association and the U.S. Geological Survey: Abrasion hardness

After reviewing the work of sclerometry, this paper shows that yielding and relative softness are the mechanical basis of what should be called malacometry. The experiments have been made with diamond drills, ring cuts, end millers and grinding wheels. Auerbach's "limited scope of the Mohs list" is quantitatively confirmed. The wear of diamonds is examined. A program is carried out, for rotary or annular abrasion by diamond under three applications of energy, each progressively slower. A selected commercial talc is the control substance of softness value 100. The instruments used are synchronous motors, drill presses, wheel grinders, and watchmaker lathes. Some 200 minerals, woods, metals, glasses and plastics were originally measured. Hardness tables and curves are shown for comparison with volumetric abradability. For a Mohs succession the softer substances abrade relatively more under higher energy of contact friction, and any one substance shows higher relative values under lower energy of attrition; in other words, under slower scratching. An artificially cut diamond octahedron gives more consistent results than a natural crystal, under light pressures. Standard successions of relative abradability measurements do not hold good under different energies of attack. Functions of plasticity, brittleness, cleavage, powder lubricity, ductility and the like introduce various anomalies, and constancy of pressure varies with variable yielding. The supposition that rhythmic instrumental abrading will hold its mechanical constants, while the substance attacked yields in accord with its own surface molecular mobility relative to a control substance, is only approximately true. At low energies the approximation is better than at high, but at high speeds the wear of tool is less. Hence the advantage of using with slow speed a replaceable tool. Substances of different categories such as steels and woods, differ in behavior from minerals. The Mohs System has the great advantage of extending the controls from mineral to mineral up through the whole scale, and is purely qualitative. It is not numerically quantitative at all in terms of equal units. A principal result of this investigation is that 80 per cent of the Mohs Scale, Numbers 3 to 10, are by common consent within 1 per cent of a malacometric scale numbered 1 to 100. The scientists who determined this relation were the sclerometry investigators of the nineteenth century, who mistakenly thought that the wide intervals of sclerometry are between the hard minerals. They used the reciprocals of the measures of yielding. The simple scratch tester finally arrived at is quite different from the instruments of Parts II and III. It eliminates diamond drilling, retains the Mohs controls and utilizes a dental grinding wheel and a modern low speed motor. The object of this research has been to design a simple instrument for many uses, especially for the mechanic's shop. It is planned for manufacture at an early date. The author is indebted to Dr. Earl Ingerson, Chief, Geochemistry and Petrology Branch, for critical correction and approval of this paper, by authority of the Director, U. S. Geological Survey.

Report of the Hawaiian Volcano Observatory↗
USGS1999

Ten years of studies on Maryland's inner Continental Margin and coastal bays

During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analyses completed during the first four years, a late Quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian (oxygen-isotope stages 7 and/or 9) transgressive shelf sands. Overlying the Q1 unit, the Q2 unit is a 6-meter thick mud sequence of oxygen-isotope stage 5 (128-75 ka) age. Units Q3 and Q4 representing fluvial and leading edge estuarine deposits (oxygen-isotope stages 4, 3 and 2) filled numerous paleochannels that were incised into units Q2 and Q1. Modern trailing-edge transgressive shelf shoals (Unit Q5) discontinuously cap the sequence. The 5th and 6th years studies reported on the economic minerals of surficial and cored sediments. Vibracores collected off the Maryland's shelf during previous studies were analyzed for mineral types and abundances, weight percent of general size fractions, and heavy mineral (HM) content. Mineralogic maturity indices were compiled to correlate the THM and economic heavy minerals (EHM) abundances with position offshore, sediment type, and the indices themselves. For the 7th year, the Maryland Geological Survey re-examined geophysical records and lithological data originally collected by the Army Corps of Engineers to locate and assess beach fill borrow areas for the Ocean City Beach Replenishment Project. Data from 163 vibracores and over 300 kilometers of high-resolution seismic profile records collected off Ocean City, Maryland, supported the stratigraphic model developed by MGS during the first four years of the AASG-MMS program. The Maryland coastal bays became the focus of study during the 8th and 9th years during which seismic records, cores and surficial sediment were collected in Isle of Wight and Assawoman Bays. Shallow pretransgression surface was mapped, relating the existing streams to offshore paleochannels. The tenth year study focused on developing a repository for vibracores collected on Maryland's inner continental shelf.During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Survey investigated the sedimentological, paleontological, stratigraphical and geophysical character of Maryland's inner continental shelf. Based on seismic records and sedimentological analysis completed during the first four years, a late quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian transgressive shelf sands.

Marine Georesources and Geotechnology↗
USGS1979

Small-scale slump deposits, Middle Atlantic Continental Slope, off eastern United States

Analyses of 24 high-resolution seismic-reflection profiles that were collected during local and regional surveys show that small-scale slump deposite are ubiquitous whthin the intercanyon areas of the Continental Slope of the Middle Atlantic Bight. The deposits involve the upper 10-90 m of sediments, extend downslops for 1.8-7.2 km, and are present at water depths ranging from 545 to 1500 m. The characteristics of the deposits vary from thin, homogeneous or fairly regularly bedded lenses of sediment, to masses of intermediate thickness with contorted bedding, to relatively large slump blocks. A detailed survey of one slump mass just south of Hudson Canyon (by means of close-spaced Minisparker profiles and sediment cores) showed that it had a thickness of about 30 m and a volume of at least 0.4 km3 and consisted of homogeneous clay which accumulated rapidly during the late Pleistocene or Holocene. Although some of the slump deposits undoubtedly are relict, stemming from sediment instability porduced by rapid deposition during Pleistocene sea-level regressions, others were formed relatively recently. Possible causes of modern slumps include gas generation in the sediments, bottom-water turbulence on the upper slope, and shallow faulting. This study indicates that small-scale slumping in the intercanyon areas may be an important process in transporting sediments to the deep sea and suggests that recent mass movements may constitute a geologic hazard to future economic development of this part of the Continental Slope.

Middle Atlantic Bight↗
USGS2016

The 3D Elevation Program and America's infrastructure

Infrastructure—the physical framework of transportation, energy, communications, water supply, and other systems—and construction management—the overall planning, coordination, and control of a project from beginning to end—are critical to the Nation’s prosperity. The American Society of Civil Engineers has warned that, despite the importance of the Nation’s infrastructure, it is in fair to poor condition and needs sizable and urgent investments to maintain and modernize it, and to ensure that it is sustainable and resilient. Three-dimensional (3D) light detection and ranging (lidar) elevation data provide valuable productivity, safety, and cost-saving benefits to infrastructure improvement projects and associated construction management. By providing data to users, the 3D Elevation Program (3DEP) of the U.S. Geological Survey reduces users’ costs and risks and allows them to concentrate on their mission objectives. 3DEP includes (1) data acquisition partnerships that leverage funding, (2) contracts with experienced private mapping firms, (3) technical expertise, lidar data standards, and specifications, and (4) most important, public access to high-quality 3D elevation data. The size and breadth of improvements for the Nation’s infrastructure and construction management needs call for an efficient, systematic approach to acquiring foundational 3D elevation data. The 3DEP approach to national data coverage will yield large cost savings over individual project-by-project acquisitions and will ensure that data are accessible for other critical applications.

Fact Sheet↗
USGS2018

Geologic map of the Castle Rock 7.5' quadrangle, Arizona and California

The Castle Rock quadrangle is in the northeast corner of Chemehuevi Valley, California and Arizona. It includes the Colorado River’s entrance to the valley at the mouth of Topock Gorge and the northern outskirts of Lake Havasu City, Arizona, and the Chemehuevi Indian Tribe community of Havasu Lake, California. The map includes large parts of the Chemehuevi Indian Reservation and the Havasu National Wildlife Refuge. Upon its exit through the mouth of Topock Gorge, the Colorado River enters Chemehuevi Valley where its floodplain (now submerged under Lake Havasu) is flanked by alluvial piedmonts of the Chemehuevi and Mohave Mountains to the west and east, respectively. This abrupt transition offers a useful perspective into the structural evolution of the Colorado River extensional corridor and of the Colorado River itself. It contains key structural and stratigraphic elements recording a complex history of Cretaceous plutonism and deformation, significant tectonic extension, volcanism, and sedimentation in the Miocene, and, ultimately, the evolution of the Colorado River from the latest Miocene to the present. Lake Havasu submerged the axis of Chemehuevi Valley following the completion of Parker Dam in 1938, and the Colorado River now feeds a verdant delta marsh that composes part of the map. Important bedrock units include the Cretaceous Chemehuevi Mountains Plutonic Suite, the 18.78 Ma Peach Spring Tuff, and thick overlying sequences of interlayered Miocene megabreccia and fanglomerate. The exposure of these units is closely linked to extension along the Chemehuevi-Whipple Mountains detachment fault system. The complex bedrock geologic framework serves as the structural and topographic foundation for the key strata chronicling the evolution of the lower Colorado River. Important stratigraphic units that bear on its evolution to the present day include the Bouse Formation, the Bullhead Alluvium, and the Chemehuevi Formation. The map area also contains the river’s modern delta at the head of Lake Havasu.

Arizona, California↗
USGS2007

Differentiating pedogenesis from diagenesis in early terrestrial paleoweathering surfaces formed on granitic composition parent materials

Unconformable surfaces separating Precambrian crystalline basement and overlying Proterozoic to Cambrian sedimentary rocks provide an exceptional opportunity to examine the role of primitive soil ecosystems in weathering and resultant formation of saprolite (weathered rock retaining rock structure) and regolith (weathered rock without rock structure), but many appear to have been affected by burial diagenesis and hydrothermal fluid flow, leading some researchers to discount their suitability for such studies. We examine one modern weathering profile (Cecil series), four Cambrian paleoweathering profiles from the North American craton (Squaw Creek, Franklin Mountains, Core SQ-8, and Core 4), one Neoproterozoic profile (Sheigra), and one late Paleoproterozoic profile (Baraboo), to test the hypothesis that these paleoweathering profiles do provide evidence of primitive terrestrial weathering despite their diagenetic and hydrothermal overprinting, especially additions of potassium. We employ an integrated approach using (1) detailed thin-section investigations to identify characteristic pedogenic features associated with saprolitization and formation of well-drained regoliths, (2) electron microprobe analysis to identify specific weathered and new mineral phases, and (3) geochemical mass balance techniques to characterize volume changes during weathering and elemental gains and losses of major and minor elements relative to the inferred parent materials. There is strong pedogenic evidence of paleoweathering, such as clay illuviation, sepic-plasmic fabrics, redoximorphic features, and dissolution and alteration of feldspars and mafic minerals to kaolinite, gibbsite, and Fe oxides, as well as geochemical evidence, such as whole-rock losses of Na, Ca, Mg, Si, Sr, Fe, and Mn greater than in modern profiles. Evidence of diagenesis includes net additions of K, Ba, and Rb determined through geochemical mass balance, K-feldspar overgrowths in overlying sandstone sections, and K-feldspars with reaction rims in weathered basement. The sub-Cambrian paleoweathering profiles formed on granite are remarkably similar to modern weathering profiles formed on granite, in spite of overprinting by potassium diagenesis. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗
USGS2004

A preliminary assessment of geologic framework and sediment thickness studies relevant to prospective US submission on extended continental shelf

Under the provisions of Articles 76 and 77 of the United Nations Convention on the Law of the Sea (UNCLOS), coastal States have sovereign rights over the continental shelf territory beyond 200-nautical mile (nm) from the baseline from which the territorial sea is measured if certain conditions are met regarding the geologic and physiographic character of the legal continental shelf as defined in those articles. These claims to an extended continental shelf must be supported by relevant bathymetric, geophysical and geological data according to guidelines established by the Commission on the Limits of the Continental Shelf (CLCS, 1999). In anticipation of the United States becoming party to UNCLOS, Congress in 2001 directed the Joint Hydrographic Center/Center for Coastal and Ocean Mapping at the University of New Hampshire to conduct a study to evaluate data relevant to establishing the outer limit of the juridical continental shelf beyond 200 nm and to recommend what additional data might be needed to substantiate such an outer limit (Mayer and others, 2002). The resulting report produced an impressive and sophisticated GIS database of data sources. Because of the short time allowed to complete the report, all seismic reflection data were classified together; the authors therefore recommended that USGS perform additional analysis on seismic and related data holdings. The results of this additional analysis are the substance of this report, including the status of geologic framework, sediment isopach research, and resource potential in the eight regions1 identified by Mayer and others (2002) where analysis of seismic data might be crucial for establishing an outer limit . Seismic reflection and refraction data are essential in determining sediment thickness, one of the criteria used in establishing the outer limits of the juridical continental shelf. Accordingly, the initial task has been to inventory public-domain seismic data sources, primarily those regionally extensive data held within the Department of the Interior (DOI). The numerous seismic reflection and refraction surveys collected prior to 1970 by academic and governmental institutions are generally not included in this compilation, except where they provide unique data in a region. These data sources were omitted from this report because they were deemed to be of insufficient quality (poorly navigated or low resolution) to meet the CLCS standards for a submission, or they were redundant with higher-quality, more modern data. Hence, this report attempts to identify those data sets of highest utility for establishing the outer limits of the juridical continental shelf. If there was any ambiguity or uncertainty about the relevance of a data set to a continental shelf submission, either by its quality, location, or other parameter, it was included in this compilation. This report does not summarize other geophysical data (such as marine magnetics or gravity) that might be relevant to understanding crustal provenance and geological continuity. Detailed metadata tables and maps are included to facilitate the location and utilization of these sources when a comprehensive assessment (?desktop study?) is undertaken.

Open-File Report↗
USGS1988

Fossil diatoms and neogene paleolimnology

Diatoms have played an important role in the development of Neogene continental biostratigraphy and paleolimnology since the mid-19th Century. The history of progress in Quaternary diatom biostratigraphy has developed as a result of improved coring techniques that enable sampling sediments beneath existing lakes coupled with improved chronological control (including radiometric dating and varve enumeration), improved statistical treatment of fossil diatom assemblages (from qualitative description to influx calculations of diatom numbers or volumes), and improved ecological information about analogous living diatom associations. The last factor, diatom ecology, is the most critical in many ways, but progresses slowly. Fortunately, statistical comparison of modern diatom assemblages and insightful studies of the nutrient requirements of some common freshwater species are enabling diatom paleolimnologists to make more detailed interpretations of the Quaternary record than had been possible earlier, and progress in the field of diatom biology and ecology will continue to refine paleolimnological studies. The greater age and geologic setting of Tertiary diatomaceous deposits has prompted their study in the contexts of geologic history, biochronology and evolution. The distribution of diatoms of marine affinities in continental deposits has given geologists insights about tectonism and sea-level change, and the distribution of distinctive (extinct?) diatoms has found utilization both in making stratigraphic correlations between outcrops of diatomaceous deposits and in various types of biochronological studies that involve dating deposits in different areas. A continental diatom biochronologic scheme will rely upon evolution, such as the appearance of new genera within a family, in combination with regional environmental changes that are responsible for the wide distribution of distinctive diatom species. The increased use of the scanning electron microscope for the detailed descriptions of fossil diatoms will provide the basis for making more accurate correlations and identifications, and the micromorphological detail for speculations about evolutionary relationships.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS2016

NHDPlusHR: A national geospatial framework for surface-water information

The U.S. Geological Survey is developing a new geospatial hydrographic framework for the United States, called the National Hydrography Dataset Plus High Resolution (NHDPlusHR), that integrates a diversity of the best-available information, robustly supports ongoing dataset improvements, enables hydrographic generalization to derive alternate representations of the network while maintaining feature identity, and supports modern scientific computing and Internet accessibility needs. This framework is based on the High Resolution National Hydrography Dataset, the Watershed Boundaries Dataset, and elevation from the 3-D Elevation Program, and will provide an authoritative, high precision, and attribute-rich geospatial framework for surface-water information for the United States. Using this common geospatial framework will provide a consistent basis for indexing water information in the United States, eliminate redundancy, and harmonize access to, and exchange of water information.

JAWRA↗
USGS2013

Estimating economic losses from earthquakes using an empirical approach

We extended the U.S. Geological Survey's Prompt Assessment of Global Earthquakes for Response (PAGER) empirical fatality estimation methodology proposed by Jaiswal et al. (2009) to rapidly estimate economic losses after significant earthquakes worldwide. The requisite model inputs are shaking intensity estimates made by the ShakeMap system, the spatial distribution of population available from the LandScan database, modern and historic country or sub-country population and Gross Domestic Product (GDP) data, and economic loss data from Munich Re's historical earthquakes catalog. We developed a strategy to approximately scale GDP-based economic exposure for historical and recent earthquakes in order to estimate economic losses. The process consists of using a country-specific multiplicative factor to accommodate the disparity between economic exposure and the annual per capita GDP, and it has proven successful in hindcast-ing past losses. Although loss, population, shaking estimates, and economic data used in the calibration process are uncertain, approximate ranges of losses can be estimated for the primary purpose of gauging the overall scope of the disaster and coordinating response. The proposed methodology is both indirect and approximate and is thus best suited as a rapid loss estimation model for applications like the PAGER system.

Earthquake Spectra↗
USGS2025

Critical minerals in mine waste

Introduction Critical minerals are commodities with vulnerable supply chains that play a vital role in supporting the United States’ economy, national defense and security, emerging technologies, and energy independence. The prosperity of our Nation depends on generating a resilient supply of domestic critical minerals; mine waste may be an untapped source of these commodities. Mine waste from centuries of legacy mining persist on the landscape and may contain critical minerals and other valuable commodities previously deemed uneconomic to recover. At modern mines, the financial viability of recovering byproduct critical minerals, which are not the primary target, may be marginal and can ultimately destine them to mine waste. Further, mine waste can be a liability for the mining company or, at legacy mines, the taxpayer because of its effect on the landscape. The U.S. Geological Survey (USGS) has several initiatives to evaluate critical mineral resources in various types of waste. This factsheet highlights studies of mine waste carried out by USGS scientists at the Geology, Energy & Minerals Science Center in collaboration with other science centers funded through the USGS Mineral Resources Program. Recovery of critical minerals from mine waste can aid in remediation efforts and increase domestic supply of vital mineral resources.

Fact Sheet↗
USGS2010

Health effects of energy resources

Energy resources (coal, oil, and natural gas) are among the cornerstones of modern industrial society. The exploitation of these resources, however, is not without costs. Energy materials may contain harmful chemical substances that, if mobilized into air, water, or soil, can adversely impact human health and environmental quality. In order to address the issue of human exposure to toxic substances derived from energy resources, the U.S. Geological Survey (USGS) Energy Resources Program developed a project entitled 'Impacts of Energy Resources on Human Health and Environmental Quality.' The project is intended to provide policymakers and the public with the scientific information needed to weigh the human health and environmental consequences of meeting our energy needs. This fact sheet discusses several areas where the USGS Energy Resources Program is making scientific advances in this endeavor.

Fact Sheet↗
USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗
USGS1987

Cenozoic stratigraphy and geologic history of the Tucson Basin, Pima County, Arizona

This report was prepared as part of a geohydrologic study of the Tucson basin conducted by the U.S. Geological Survey in cooperation with the city of Tucson. Geologic data from more than 500 water supply and test wells were analyzed to define characteristics of the basin sediments that may affect the potential for land subsidence induced by groundwater withdrawal. The Tucson basin is a structural depression within the Basin and Range physiographic province. The basin is 1,000 sq mi in units area and trends north to northwest. Three Cenozoic stratigraphic unit--the Pantano Formation of Oligocene age, the Tinaja beds (informal usage) of Miocene and Pliocene age, and the Fort Lowell Formation of Pleistocene age--fill the basin. The Tinaja beds include lower, middle, and upper unconformable units. A thin veneer of stream alluvium of late Quaternary age overlies the Fort Lowell Formation. The Pantano Formation and the lower Tinaja beds accumulated during a time of widespread continental sedimentation, volcanism, plutonism, uplift, and complex faulting and tilting of rock units that began during the Oligocene and continued until the middle Miocene. Overlying sediments of the middle and upper Tinaja beds were deposited in response to two subsequent episodes of post-12-million-year block faulting, the latter of which was accompanied by renewed uplift. The Fort Lowell Formation accumulated during the Quaternary development of modern through-flowing the maturation of the drainage. The composite Cenozoic stratigraphic section of the Tucson basin is at least 20,000 ft thick. The steeply tilted to flat-lying section is composed of indurated to unconsolidated clastic sediments, evaporites, and volcanic rocks that are lithologically and structurally complex. The lithology and structures of the section was greatly affected by the uplift and exhumation of adjacent metamorphic core-complex rocks. Similar Cenozoic geologic relations have been identified in other parts of southern Arizona. (Author 's abstract)

Water-Resources Investigations Report↗