Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources
USGS1989

Organic geochemistry and brine composition in Great Salt, Mono, and Walker Lakes

Samples of Recent sediments, representing up to 1000 years of accumulation, were collected from three closed basin lakes (Mono Lake, CA, Walker Lake, NV, and Great Salt Lake, UT) to assess the effects of brine composition on the accumulation of total organic carbon, the concentration of dissolved organic carbon, humic acid structure and diagenesis, and trace metal complexation. The Great Salt Lake water column is a stratified Na-Mg-Cl-SO 4 brine with low alkalinity. Algal debris is entrained in the high density (1.132–1.190 g/cc) bottom brines, and in this region maximum organic matter decomposition occurs by anaerobic processes, with sulfate ion as the terminal electron acceptor. Organic matter, below 5 cm of the sediment-water interface, degrades at a very slow rate in spite of very high pore-fluid sulfate levels. The organic carbon concentration stabilizes at 1.1 wt%. Mono Lake is an alkaline (Na-CO 3 -Cl-SO 4 ) system. The water column is stratified, but the bottom brines are of lower density relative to the Great Salt Lake, and sedimentation of algal debris is rapid. Depletion of pore-fluid sulfate, near l m of core, results in a much higher accumulation of organic carbon, approximately 6 wt%. Walker Lake is also an alkaline system. The water column is not stratified, and decomposition of organic matter occurs by aerobic processes at the sediment-water interface and by anaerobic processes below. Total organic carbon and dissolved organic carbon concentrations in Walker Lake sediments vary with location and depth due to changes in input and pore-fluid sulfate concentrations. Nuclear magnetic resonance studies ( 13 C) of humic substances and dissolved organic carbon provide information on the source of the Recent sedimentary organic carbon (aquatic vs. terrestrial), its relative state of decomposition, and its chemical structure. The spectra suggest an algal origin with little terrestrial signature at all three lakes. This is indicated by the ratio of aliphatic to aromatic carbon and the absence of chemical structures indicative of the lignin of vascular plants. The dissolved organic carbon of the Mono Lake pore fluids is structurally related to humic acid and is also related to carbohydrate metabolism. The alkaline pore fluids, due to high pH, solubilize high molecular weight organic matter from the sediments. This hydrophilic material is a metal complexing agent. Despite very high algal productivities, organic carbon accumulation can be low in stratified lakes if the anoxic bottom waters are hypersaline with high concentrations of sulfate ion. Labile organic matter is recycled to the water column and the sedimentary organic matter is relatively nonsusceptible to bacterial metabolism. As a result, pore-fluid dissolved organic carbon and metal-organic complexation are low.

Geochimica et Cosmochimica Acta↗
USGS1991

Coprecipitation mechanisms and products in manganese oxidation in the presence of cadmium

Manganese oxidation products were precipitated in an aerated open-aqueous system where a continuous influx of mixed Mn 2+ and Cd 2+ solution was supplied and pH was maintained with an automated pH-stat adding dilute NaOH. X-ray diffraction and electron diffraction identified the solids produced as mixtures of Cd 2 Mn 3 4+ O 8 , Mn 2+ 2 Mn 4+ 3 O 8 , MnO 2 (ramsdellite), and CdCO 3 . Mean oxidation numbers of the total precipitated Mn as great as 3.6 were reached during titrations. During subsequent aging in solution, oxidation numbers between 3.8 and 3.9 were reached in some precipitates in less than 40 days. Conditional oxidation rate constants calculated from a crystal-growth equation applied to titration data showed the overall precipitation rate, without considering manganese oxidation state in the precipitate, was increased by a factor of ~4 to ~7 when the mole ratio (Cd/Mn + Cd) of cadmium in the feed solution was 0.40 compared with rate constants for hausmannite (Mn 2+ Mn 2 3+ O 4 precipitation under similar conditions but without accessory metals. Kinetic experiments were made to test effects of various Cd/Mn + Cd mole ratios and rates of addition of the feed solution, different temperatures from 5.0 to 35°C, and pH from 8.0 to 9.0. Oxidation rates were slower when the Cd mole ratio was less than 0.40. The rate increased by a factor of ~10 when pH was raised one-half unit. The effect of temperature on the rate constants was also substantial, but the meaning of this is uncertain because the rate of formation of Mn 4+ oxide in the absence of Cd or other accessory metals was too slow to be measurable in titration experiments. The increased rate of Mn 4+ oxide formation in the presence of Cd 2+ can be ascribed to the formation of a labile adsorbed intermediate, CdMn 2 O 4 Int , an analog of hausmannite, formed on precipitate surfaces at the beginning of the oxidation process. The increased lability of this structure, resulting from coordination-chemical behavior of Cd 2+ during the titration, causes a rapid second-stage rearrangement and facilitates disproportionation of the Mn 3+ ions. The Mn 2+ ions thus released provide a positive feedback mechanism that couples the two steps of the conversion of Mn 2+ to Mn 4+ more closely than is possible when other metal ions besides manganese are not present. During aging of precipitates in contact with solutions, proportions of Cd 2 Mn 3 O 8 and MnO 2 increased at the expense of other precipitate components.

Geochimica et Cosmochimica Acta↗
USGS1991

An aem-tem study of weathering and diagenesis, Abert Lake, Oregon: I. Weathering reactions in the volcanics

Abert Lake in south-central Oregon provides a site suitable for the study of sequential weathering and diagenetic events. In this first of two papers, transmission electron microscopy was used to characterize the igneous mineralogy, subsolidus alteration assemblage, and the structural and chemical aspects of silicate weathering reactions that occur in the volcanic rocks (basalts, basaltic andesites, and dacitic/ rhyolitic extrusive and pyroclastics) that outcrop around the lake. Olivine and pyroxene replacement occurred topotactically, whereas feldspar and glass alteration produced randomly oriented smectite in channels and cavities. The tetrahedral, octahedral, and interlayer compositions of the weathering products, largely dioctahedral smectites, varied with primary mineral composition, rock type, and as the result of addition of elements released from adjacent reaction sites. Weathering of the highly evolved, Fe-rich Jug Mountain complex at the north end of the lake produced a homogeneous smectite assemblage that contrasts with the heterogeneous smectite assemblage replacing the volcanics along the eastern margin of the lake. The variability within and between the smectite assemblages highlights the microenvironmental diversity, fluctuating redox conditions, and variable solution chemistry associated with mineral weathering reactions in the surficial environment. Late-stage exhalative and aqueous alteration of the volcanics redistributed many components and formed a variety of alkali and alkali-earth carbonate, chloride, sulfate, and fluoride minerals in vugs and cracks. Overall, substantial Mg, Si, Na, Ca, and K are released by weathering reactions that include the almost complete destruction of the Mg-smectite that initially replaced olivine. The leaching of these elements from the volcanics provides an important source of these constituents in the lake water. The nature of subsequent diagenetic reactions resulting from the interaction between the materials transported to the lake and the solution will be described in part II ( Banfield et al., 1991).

Geochimica et Cosmochimica Acta↗
USGS1994

Surface alteration and physical properties of glass from the Cretaceous-Tertiary boundary

The scalloped surface feature on Cretaceous-Tertiary boundary glass is often explained as being due to terrestrial aqueous leaching. Leaching of man-made glass results in a reduction in density of the glass. Also, Fe, because of its relative insolubility, is concentrated by the leaching process. Thus, the Haitian glass specimens which have been heavily altered should have a thin rim of less dense glass in which the Fe is concentrated compared to the core glass. The higher Fe concentration in the rim glass should cause it to have an enhanced Curie constant and a lower density compared to the unaltered glass. The magnetic Curie constant, density, and scanning electron microscopic studies were made on altered specimens of Haitian glass and also on specimens showing a minimum of alteration. The results show that the less altered samples have the highest density and the lowest Curie constant. The data substantiate the terrestrial hypothesis.

Geochimica et Cosmochimica Acta↗
USGS1994

Experimental studies of alunite: II. Rates of alunite-water alkali and isotope exchange

Rates of alkali exchange between alunite and water have been measured in hydrothermal experiments of 1 hour to 259 days duration at 150 to 400°C. Examination of run products by scanning electron microscope indicates that the reaction takes place by dissolution-reprecipitation. This exchange is modeled with an empirical rate equation which assumes a linear decrease in mineral surface area with percent exchange (f) and a linear dependence of the rate on the square root of the affinity for the alkali exchange reaction. This equation provides a good fit of the experimental data for f = 17% to 90% and yields log rate constants which range from −6.25 moles alkali m −2 s −1 at 400°C to − 11.7 moles alkali m −2 s −1 at 200°C. The variation in these rates with temperature is given by the equation log k∗ = −8.17(1000/T(K)) + 5.54 (r 2 = 0.987) "> k∗ = −8.17(1000/T(K)) + 5.54 (r 2 = 0.987) which yields an activation energy of 37.4 ± 1.5 kcal/mol. For comparison, data from O'Neil and Taylor (1967) and Merigoux (1968) modeled with a pseudo-second-order rate expression give an activation energy of 36.1 ± 2.9 kcal/mol for alkali-feldspar water Na-K exchange. In the absence of coupled alkali exchange, oxygen isotope exchange between alunite and water also occurs by dissolution-reprecipitation but rates are one to three orders of magnitude lower than those for alkali exchange. In fine-grained alunites, significant D-H exchange occurs by hydrogen diffusion at temperatures as low as 100°C. Computed hydrogen diffusion coefficients range from −15.7 to −17.3 cm 2 s −1 and suggest that the activation energy for hydrogen diffusion may be as low as 6 kcal/mol. These experiments indicate that rates of alkali exchange in the relatively coarse-grained alunites typical of hydrothermal ore deposits are insignificant, and support the reliability of K-Ar age data from such samples. However, the fine-grained alunites typical of low temperature settings may be susceptible to limited alkali exchange at surficial conditions which could cause alteration of their radiometric ages. Furthermore, the rapid rate of hydrogen diffusion observed at 100–150°C suggests that fine-grained alunites are susceptible to rapid D-H re-equilibration even at surficial conditions.

Geochimica et Cosmochimica Acta↗
USGS1972

Imaging experiment: The Viking Mars orbiter

The general objectives of the Imaging Experiment on the Viking Orbiter are to aid the selection of Viking Lander sites, to map and monitor the chosen sites during lander operations, to aid in the selection of future landing sites, and to extend our knowledge of the planet. The imaging system consists of two identical vidicon cameras each attached to a 1026 mm T/8 telescope giving approximately 1° square field of view. From an altitude of 1500 km the picture elements will be approximately 24m apart. The vidicon is coupled with an image intensifier which provides increased sensitivity and permits electronic shuttering and image motion compensation. A vidicon readout time of 2.24 sec enables pictures to be taken in rapid sequence for contiguous coverage at high resolution. The camera differs from those previously flown to Mars by providing contiguous coverage at high resolution on a single orbital pass, by having sufficient sensitivity to use narrow band color filters at maximum resolution, and by having response in the ultraviolet. These capabilities will be utelized to supplement lander observations and to extend our knowledge particularly of volcanic, erosional, and atmospheric phenomena on Mars.

Icarus↗
USGS1974

Naturally occurring vapor-liquid-solid (VLS) Whisker growth of germanium sulfide

The first naturally occurring terrestrial example of vapor-liquid-solid (VLS) growth has been observed in condensates from gases released by burning coal in culm banks. Scanning electron microscopy, X-ray diffraction, and energy dispersive analysis indicate that the crystals consist of elongated rods (≈ 100 μm) of germanium sulfide capped by bulbs depleted in germanium.

Journal of Crystal Growth↗
USGS1995

Can otolith microchemistry chart patterns of migration and habitat utilization in anadromous fishes?

Seasonal and ontogenetic patterns in estuarine and coastal migrations of anadromous fish species have important consequences to their survival, growth, recruitment, and reproduction. We tested the hypothesis that otolith (sagitta) microchemistry can document the environmental history of individual fish across an estuarine salinity gradient. Juvenile striped bass, Morone saxatilis (Walbaum), (80 days posthatch) were reared for 3 wk in aquaria at two temperatures and six salinities. The ratio of strontium/calcium ( Sr Ca "> SrCa ) deposited in the sagittal otoliths of reared juveniles was positively related to salinity. Temperature and growth rate had relatively minor, but significant effects on the Sr Ca "> SrCa ratio. In a second experiment, juveniles (80 days posthatch) were exposed to increasing salinity (0 ppt to 25 ppt) and then decreasing salinity (25 ppt to 0 ppt) over a 20-wk period. Electron microprobe examination of the otoliths from these juveniles showed a gradual rise and decline in Sr Ca "> SrCa during the experimental period which corresponded directly with experimental changes in salinity. Field data on subadult and adult striped bass corroborated the laboratory analyses and indicated a logistic relationship between ambient salinity and otolith Sr Ca "> SrCa ratio. Verification studies support the use of otolith microchemistry to measure migratory schedules and habitat utilization patterns in anadromous striped bass populations.

Journal of Experimental Marine Biology and Ecology↗
USGS1991

Geochemistry of dissolved inorganic carbon in a Coastal Plain aquifer. 2. Modeling carbon sources, sinks, and δ13C evolution

Stable isotope data for dissolved inorganic carbon (DIC), carbonate shell material and cements, and microbial CO 2 were combined with organic and inorganic chemical data from aquifer and confining-bed pore waters to construct geochemical reaction models along a flowpath in the Black Creek aquifer of South Carolina. Carbon-isotope fractionation between DIC and precipitating cements was treated as a Rayleigh distillation process. Organic matter oxidation was coupled to microbial fermentation and sulfate reduction. All reaction models reproduced the observed chemical and isotopic compositions of final waters. However, model 1, in which all sources of carbon and electron-acceptors were assumed to be internal to the aquifer, was invalidated owing to the large ratio of fermentation CO 2 to respiration CO 2 predicted by the model (5–49) compared with measured ratios (two or less). In model 2, this ratio was reduced by assuming that confining beds adjacent to the aquifer act as sources of dissolved organic carbon and sulfate. This assumption was based on measured high concentrations of dissolved organic acids and sulfate in confining-bed pore waters (60–100 μM and 100–380 μM, respectively) relative to aquifer pore waters (from less than 30 μM and 2–80 μM, respectively). Sodium was chosen as the companion ion to organic-acid and sulfate transport from confining beds because it is the predominant cation in confining-bed pore waters. As a result, excessive amounts of Na-for-Ca ion exchange and calcite precipitation (three to four times more cement than observed in the aquifer) were required by model 2 to achieve mass and isotope balance of final water. For this reason, model 2 was invalidated. Agreement between model-predicted and measured amounts of carbonate cement and ratios of fermentation CO 2 to respiration CO 2 were obtained in a reaction model that assumed confining beds act as sources of DIC, as well as organic acids and sulfate. This assumption was supported by measured high concentrations of DIC in confining beds (2.6–2.7 mM). Results from this study show that geochemical models of confined aquifer systems must incorporate the effects of adjacent confining beds to reproduce observed groundwater chemistry accurately.

South Carolina↗
USGS1986

Phase relations in the CuVS system

Phase relations in the system Cu-V-S were studied by using a sealedcapsule technique, reflected-light microscopy, X-ray powder diffraction and electron microprobe analysis. In the temperature range between 300 and 900 ??C, six vanadium sulfides exist in the V-S system. These are VS, V7S8, V3S4, V5S8, V3S5 and VS4. In the Cu-V-S system, three Cu-V sulfides are stable. Both Cu3VS4 (sulvanite) and CuV2S4 are cubic with a = 5.391 ?? 0.005 A ?? and a = 9.789 ?? 0.005 A ?? respectively, and the third has a composition Cu0.8V1.1S2. CuV2S4 forms equilibrium assemblages with all vanadium sulfides, which restricts their effects on the phase relations in the system to a small region. ?? 1986.

Journal of the Less-Common Metals↗
USGS1973

Coexisting cummingtonite and aluminous hornblende from garnet amphibolite, Boehls Butte area, Idaho, USA

Electron microprobe analyses of green hornblende and coexisting cummingtonite from garnet amphibolite show identical Fe/Mg ratios ( = 0.9). Cummingtonite is iron-magnesium silicate with very little calcium and aluminum and practically no alkalies. In contrast, the hornblende has 1.5 tetrahedral Al, 0.9 octahedral Al and a considerable amount of Ca and alkalies. Comparison with the hornblendes from the Sierra Nevada shows a higher relative amount of tschemakite molecule in the hornblendes from Idaho where pressures during the recrystallization were higher.

Idaho↗
USGS1987

Ice erosion of a sea-floor knickpoint at the inner edge of the stamukhi zone, Beaufort Sea, Alaska

In 1981 and 1982, detailed bathymetric and side-scan sonar surveys were made of an area of the sea floor north of Prudhoe Bay, Alaska, to study the changing characteristics of the seabed at the inner boundary of the stamukhi zone, the coast-parallel zone of grounded ice ridges that occurs in water depths between 15 and 50 m in the arctic. The fathograms and sonographs resolved 10-cm features and electronic navigation gave relocations accurate to about 10 m. Year after year an ice boundary develops at the inner edge of the stamukhi zone where major shear and pressure deformation occur in about the same location. Associated with this ice boundary, the bathymetry shows a pronounced break in slope — the knickpoint — on the shelf profile at about 20 m depth. The 2–3 m-high knickpoint is cut in a consolidated gravelly mud of pre-Holocene age. A well-defined gravel and cobble shoal a few meters high usually occurs at the inshore edge of the knickpoint. The sonograph mosaic shows that seaward of the knickpoint, ice gouges saturate the sea floor and are well defined; inshore the gouges are fewer in number and are poorly defined on the records. Few gouges can be traced from the seaward side of the knickpoint across the shoals to the inshore side of the knickpoint. Studies of ice gouging rates in two seabed corridors that cross the stamukhi zone reveal the highest rates of gouging seaward of the knickpoint. We believe that the knickpoint results from ice erosion at the inner boundary of the stamukhi zone. Intensified currents associated with this boundary winnow away fine sediments. Ice bulldozing and currents shape the shoals, which perch atop the knickpoint. The knickpoint helps to limit ice forces on the seabed inshore of the stamukhi zone.

Marine Geology↗
USGS1988

Fossil diatoms and neogene paleolimnology

Diatoms have played an important role in the development of Neogene continental biostratigraphy and paleolimnology since the mid-19th Century. The history of progress in Quaternary diatom biostratigraphy has developed as a result of improved coring techniques that enable sampling sediments beneath existing lakes coupled with improved chronological control (including radiometric dating and varve enumeration), improved statistical treatment of fossil diatom assemblages (from qualitative description to influx calculations of diatom numbers or volumes), and improved ecological information about analogous living diatom associations. The last factor, diatom ecology, is the most critical in many ways, but progresses slowly. Fortunately, statistical comparison of modern diatom assemblages and insightful studies of the nutrient requirements of some common freshwater species are enabling diatom paleolimnologists to make more detailed interpretations of the Quaternary record than had been possible earlier, and progress in the field of diatom biology and ecology will continue to refine paleolimnological studies. The greater age and geologic setting of Tertiary diatomaceous deposits has prompted their study in the contexts of geologic history, biochronology and evolution. The distribution of diatoms of marine affinities in continental deposits has given geologists insights about tectonism and sea-level change, and the distribution of distinctive (extinct?) diatoms has found utilization both in making stratigraphic correlations between outcrops of diatomaceous deposits and in various types of biochronological studies that involve dating deposits in different areas. A continental diatom biochronologic scheme will rely upon evolution, such as the appearance of new genera within a family, in combination with regional environmental changes that are responsible for the wide distribution of distinctive diatom species. The increased use of the scanning electron microscope for the detailed descriptions of fossil diatoms will provide the basis for making more accurate correlations and identifications, and the micromorphological detail for speculations about evolutionary relationships.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1992

Geochronology and subsurface stratigraphy of Pukapuka and Rakahanga atolls, Cook Islands: Late Quaternary reef growth and sea level history

Eustatic sea-level cycles superposed on thermal subsidence of an atoll produce layers of high sea-level reefs separated by erosional unconformities. Coral samples from these reefs from cores drilled to 50 m beneath the lagoons of Pukapuka and Rakahanga atolls, northern Cook Islands give electron spin resonance (ESR) and U-series ages ranging from the Holocene to 600,000 yr B.P. Subgroups of these ages and the stratigraphic position of their bounding unconformities define at least 5 periods of reef growth and high sea-level (0–9000 yr B.P., 125,000–180,000 yr B.P., 180,000–230,000 yr B.P., 300,000–460,000 yr B.P., 460,000–650,000 yr B.P.). Only two ages fall within error of the last interglacial high sea-level stand (∼125,000–135,000 yr B.P.). This paucity of ages may result from extensive erosion of the last intergracial reef. In addition, post-depositional isotope exchange may have altered the time ages of three coral samples to apparent ages that fall within glacial stage 6. For the record to be preserved, vertical accretion during rising sea-level must compensate for surface lowering from erosion during sea-level lowstands and subsidence of the atoll; erosion rates (6–63 cm/1000 yr) can therefore be calculated from reef accretion rates (100–400 cm/1000 yr), subsidence rates (2–6 cm/1000 yr), and the duration of island submergence (8–15% of the last 600,000 yr). The stratigraphy of coral ages indicates island subsidence rates of 4.5 ± 2.8 cm/1000 yr for both islands. A model of reef growth and erosion based on the stratigraphy of the Cook Islands atolls suggests average subsidence and erosion rates of between 3–6 and 15–20 cm/1000 yr, respectively.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1994

Euramerican tonsteins: Overview, magmatic origin, and depositional-tectonic implications

Carboniferous tonsteins (kaolinized volcanic-ash beds) of wide geographic distribution are known in both Europe and North America. Relict volcanic minerals common in these Euramerican tonsteins are volcanic quartz (including beta-quartz paramorphs), zircon and ilmenite; less common are magnetite, fayalite, rutile, monazite, xenotime, apatite and sanidine. Data for two relatively thick (3-13 cm) and widespread (>400 km) European tonsteins (Erda and Sub-Worsley Four-foot) indicate an increase in detrital quartz near the top of the beds which indicates mixing with normal clastic sediments, including the introduction of heavy detrital minerals (e.g., tourmaline and garnet). These thick tonsteins show multiple horizontal bedding, normal graded bedding, disturbed bedding, and centimeter-scale scour surfaces. The Fire Clay tonstein in North America represents from one to five separate volcanic air-fall ash deposits as determined by normal graded bedding and mineralogical analysis. These features indicate several episodes of volcanic-ash deposition and very localized subsequent erosion and bioturbation. Electron microprobe data from glass inclusions in volcanic quartz in Euramerican tonsteins indicate a rhyolitic origin for these tonsteins and reveal chemical "fingerprints" valuable for intra- and inter-basinal correlations. However, the tectonic framework for European and North American tonsteins was quite different. In Europe, volcanic-ash beds were associated with Variscan collisional tectonics, whereas in North America, volcanic ash was associated with Ouachita tectonic activity, explosive volcanism from the Yucatan block, collision between the South American and North American plates, and the formation of Pangea.

Palaeogeography, Palaeoclimatology, Palaeoecology↗
USGS1968

Paleomagnetism and the compositions of highly-oxidised iron-titanium oxides in basalts

As a preliminary step towards determination of the source of the natural remanence in highly-oxidised basalt lava flows, electron probe microanalysis has been carried out on the two main phases in each of two types of highly-oxidised iron-titanium oxide. The discovery of the source of NRM in these basalts is important because the correlations obtained recently by several workers between high oxidation and reversed polarity in basalts appear to support the possibility of self-reversal, even though some of the rocks studied give independent indications that the reversed magnetizations are due to field reversal. In one type of grain analysed the probe data are consistent with a titanohematite phase and a pseudobrookite phase. This agrees with previous petrographic data. In the other type of grain the probe data are consistent with one phase of titanohematite but contradict petrographic data by showing that the other phase cannot be titanomagnetite. It is concluded that significant contributions to the NRM could possibly arise from the titanohematite (whose magnetic properties in basalts are little known) or the unindentified phase (unless subsequent work rules this phase out), but not in the pseudobrookite phase. However, the NRM may not lie in the analysed grains at all; and other workers are at present investigating this possibility.

Physics of the Earth and Planetary Interiors↗
USGS1989

Comparison of geoelectrical/tectonic models for suture zones in the western U.S.A. and eastern Europe: are black shales a possible source of high conductivities?

Large-scale geoelectrical anomalies have been mapped with geomagnetic depth sounding (GDS) and magnetotelluric (MT) surveys in the Carpathian Mountains region. These anomalies are associated with the zone of closure between stable Europe and a complex of microplates in front of the converging African plate. The zone of closure, or suture zone, is largely occupied by an extensive deformed flysch belt. The models derived to fit the observed geoelectrical data are useful in the study of other suture zones, and Carpathian structures have been compared with areas currently being studied in the western Cordillera of the U.S.A. Models derived for a smaller-scale suture zone mapped in western Washington State have features that are similar to the Carpathian models. The geoelectrical models for both the Carpathian and Washington anomalies require dipping conductive slabs of 1-5 ?? m material that extends to depths > 20 km. In both instances there is evidence that these materials may merge with lower crustal-mantle conductors along the down-dip margins of the slab. The main conductive units are interpreted to be sedimentary rocks that have been partially subducted due to collisional processes. Heat flow is low in both regions and it is difficult to explain fully the deep conduction mechanisms; however, evidence suggests that the conduction at depth may include electronic conduction in sulfide mineral or carbon films as well as ionic conduction in fluids or partial melt. ?? 1989.

Physics of the Earth and Planetary Interiors↗
USGS1985

A method for the determination of vanadium and iron oxidation states in naturally occurring oxides and silicates

A valence-specific analytical method for determining V 3+ in ore minerals has been developed that involves two steps: dissolution of a mineral sample without disturbing the V 3+ /V tot ratio, followed by determination of V 3+ in the presence of V 4+ . The samples are dissolved in a mixture of hydrofluoric and sulphuric acids at 100° in Teflon-lined reaction vessels. Tervalent vanadium is then determined colorimetrically by formation of a V 3+ -thiocyanate complex in aqueous-acetone medium. Fe 3+ is measured semi-quantitatively in the same solution. The method has been tested with two naturally occurring samples containing vanadium and iron. The results obtained were supported by those obtained by other methods, including electron spin resonance spectroscopy, thermogravimetric analysis, and Mössbauer spectroscopy.

Talanta↗