Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Computers and Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources
USGS2018

Geomorphic characteristics of Tenmile Creek, Montgomery County, Maryland, 2014–16

Data collected from April 2014 through September 2016 were used to assess geomorphic characteristics and geomorphic changes over time in a selected reach of Tenmile Creek, a small rural watershed near Clarksburg, Maryland. Longitudinal profiles of the channel bed, water surface, and bank features were developed from field surveys. Changes in cross-section geometry between field surveys were documented. Grain-size distributions for the channel bed were developed from pebble counts. Continuous-record streamflow and precipitation data were also collected in the Tenmile Creek watershed and used to supplement the geomorphic analyses. The Rosgen system of stream classification was used to classify the stream channel according to morphological measurements of slope, entrenchment ratio, width-to-depth ratio, sinuosity, and median particle diameter of the channel materials. Boundary shear stress near the U.S. Geological Survey (USGS) streamflow-gaging station was assessed by using hydraulic variables computed from the cross-section surveys and slope measurements derived from crest-stage gages and temporary data loggers installed along the study reach. Analysis of the longitudinal profiles indicated relatively small changes in the percentage and distribution of riffles, pools, and runs in the study reach between April 2014 and March 2015. More noticeable changes were observed during surveys conducted in March 2016 and September 2016. The channel-bed slope showed a net reduction over time from 0.0072 to 0.0040 feet per foot (ft/ft). The low-flow water-surface slope also showed a net reduction over time from 0.0065 to 0.0045 ft/ft. Net aggradation in the lower section of the study reach combined with net degradation in the upper section of the study reach contributed to the net reduction in channel-bed and water-surface slope. The large storm and resulting flood on July 30, 2016 was a major factor in observed changes in the longitudinal profiles between the March 2016 and September 2016 surveys. Comparison of data from the cross-sectional surveys indicated vertical changes in all cross sections, with more extreme changes observed between surveys in the lower section of the study reach due in part to alternating periods of net storage and transport of sand. Lateral erosion was not a major factor in the study reach, with the exception of cross section Dd, where considerable lateral erosion was documented during the study period. The flood that resulted from the large storm on July 30, 2016 was a major factor in some of the vertical changes observed in the channel bed of the study reach cross sections. Particle-size analyses of the channel bed from pebble counts indicated median particle diameters ranging from 15.5 millimeters (mm) to 23.1 mm, which is characterized as medium to coarse gravel. Sand percentages ranging from 3.4 percent to 16.4 percent of the total counts were observed over time. Net increases in storage of fine sediment in the reach were observed between April 2014 and March 2016, and a considerable reduction in storage was observed between March 2016 and September 2016. The Tenmile Creek stream channel was classified as a C4 channel, based on morphological descriptions from the Rosgen system of stream classification. The C4 classification describes a single-thread channel with a slight entrenchment ratio; a moderate to high width-to-depth ratio; moderate to high sinuosity; a water-surface slope of less than 2 percent; and a median particle diameter in the gravel range of 2 to 64 mm. The analysis of boundary shear stress indicated a range of 0.35 to 1.18 pounds per square foot for instantaneous streamflow ranging from 79 to 2,860 cubic feet per second during the study period. The relation between discharge and boundary shear stress for Tenmile Creek was compared to similar relations that were previously developed for Minebank Run, a small, urban watershed in the eastern section of the Piedmont Physiographic Province in Baltimore County, Md. that was physically restored during 2004–05. The comparison indicated a much flatter slope in the relation for Minebank Run in both its unrestored and restored conditions. This difference in the relations indicates that the erosive power in the urban watershed of Minebank Run is much more sensitive to increases in discharge magnitude than in the non-urban watershed of Tenmile Creek.

Maryland↗
USGS1987

Investigation of techniques to estimate rainfall-loss parameters for Illinois

An attempt was made by the U.S. Geological Survey to develop parameter-estimation techniques for two rainfall-loss computation methods used in the U.S. Army Corps of Engineers ' flood-hydrograph model (HEC-1). Six rainfall-loss parameters were investigated - four for the Exponential Loss-Rate method and two for the Initial and Uniform Loss-Rate method. Multiple-regression analyses using data from 616 storms at 98 gaged basins were used to attempt to develop parameter-estimation techniques for ungaged basins in Illinois. Techniques were evaluated using 102 storms at 36 uncalibrated gage basins. Estimated unit-hydrograph and rainfall-loss parameters were used to compute discharge hydrograph characteristics, which were compared with characteristics of observed discharge hydrographs. Seventy and 50% of the simulations using the Exponential Loss-Rate and the Initial and Uniform Loss-Rate methods, respectively, produced valid hydrographs. Model-sensitivity analyses to one standard error of estimate indicate that the storm-dependent rainfall-loss parameters are most significant in reproducing the sum of incremental flows and peak discharge. Time of concentrations and storage coefficient are significant in reproducing time to peak discharge and peak discharge, respectively. The small percentage of variation explained by the estimation techniques and the evaluation results using 102 storms indicates that a large degree of uncertainty exists in the computed hydrographs. (USGS)

Water-Resources Investigations Report↗
USGS1999

Site-specific estimation of peak-streamflow frequency using generalized least-squares regression for natural basins in Texas

The U.S. Geological Survey, in cooperation with the Texas Department of Transportation, has developed a computer program to estimate peak-streamflow frequency for ungaged sites in natural basins in Texas. Peak-streamflow frequency refers to the peak streamflows for recurrence intervals of 2, 5, 10, 25, 50, and 100 years. Peak-streamflow frequency estimates are needed by planners, managers, and design engineers for flood-plain management; for objective assessment of flood risk; for cost-effective design of roads and bridges; and also for the desin of culverts, dams, levees, and other flood-control structures. The program estimates peak-streamflow frequency using a site-specific approach and a multivariate generalized least-squares linear regression. A site-specific approach differs from a traditional regional regression approach by developing unique equations to estimate peak-streamflow frequency specifically for the ungaged site. The stations included in the regression are selected using an informal cluster analysis that compares the basin characteristics of the ungaged site to the basin characteristics of all the stations in the data base. The program provides several choices for selecting the stations. Selecting the stations using cluster analysis ensures that the stations included in the regression will have the most pertinent information about flooding characteristics of the ungaged site and therefore provide the basis for potentially improved peak-streamflow frequency estimation. An evaluation of the site-specific approach in estimating peak-streamflow frequency for gaged sites indicates that the site-specific approach is at least as accurate as a traditional regional regression approach.

Texas↗
USGS2017

Emulation of long-term changes in global climate: application to the late Pliocene and future

Multi-millennial transient simulations of climate changes have a range of important applications, such as for investigating key geologic events and transitions for which high-resolution palaeoenvironmental proxy data are available, or for projecting the long-term impacts of future climate evolution on the performance of geological repositories for the disposal of radioactive wastes. However, due to the high computational requirements of current fully coupled general circulation models (GCMs), long-term simulations can generally only be performed with less complex models and/or at lower spatial resolution. In this study, we present novel longterm “continuous” projections of climate evolution based on the output from GCMs, via the use of a statistical emulator. The emulator is calibrated using ensembles of GCM simulations, which have varying orbital configurations and atmospheric CO2 concentrations and enables a variety of investigations of long-term climate change to be conducted, which would not be possible with other modelling techniques on the same temporal and spatial scales. To illustrate the potential applications, we apply the emulator to the late Pliocene (by modelling surface air temperature – SAT), comparing its results with palaeo-proxy data for a number of global sites, and to the next 200 kyr (thousand years) (by modelling SAT and precipitation). A range of CO2 scenarios are prescribed for each period. During the late Pliocene, we find that emulated SAT varies on an approximately precessional timescale, with evidence of increased obliquity response at times. A comparison of atmospheric CO2 concentration for this period, estimated using the proxy sea surface temperature (SST) data from different sites and emulator results, finds that relatively similar CO2 concentrations are estimated based on sites at lower latitudes, whereas higher-latitude sites show larger discrepancies. In our second illustrative application, spanning the next 200 kyr into the future, we find that SAT oscillations appear to be primarily influenced by obliquity for the first ∼ 120 kyr, whilst eccentricity is relatively low, after which precession plays a more dominant role. Conversely, variations in precipitation over the entire period demonstrate a strong precessional signal. Overall, we find that the emulator provides a useful and powerful tool for rapidly simulating the long-term evolution of climate, both past and future, due to its relatively high spatial resolution and relatively low computational cost. However, there are uncertainties associated with the approach used, including the inability of the emulator to capture deviations from a quasi-stationary response to the forcing, such as transient adjustments of the deep-ocean temperature and circulation, in addition to its limited range of fixed ice sheet configurations and its requirement for prescribed atmospheric CO2 concentrations.

Climate of the Past↗
USGS1962

Gravity survey of the Nevada Test Site and vicinity, Nye, Lincoln, and Clark Counties, Nevada--interim report

The gravity survey of the Nevada Test Site and contiguous areas of southern Nevada and southeastern California (fig. 1) has been made by the U.S. Geological Survey on behalf of the U.S. Atomic Energy Commission. The objective of this study is to delineate and interpret gravity anomalies and regional trends so that the configuration and depth of the buried erosional surface of the Paleozoic rocks may be determined. This buried surface is of utmost importance in understanding the geologic history of the Nevada Test Site region, the thickness and distribution of the overlying volcanic rocks and alluvium, and the movement of ground water. The Paleozoic rocks cause positive gravity anomalies where they outcrop or occur near the surface and negative anomalies where they are buried in valleys or capped by low-density Tertiary volcanic rocks. Gravity trends which extend over the entire area provide a basis for computing the regional gravity gradient. The regional gravity gradient must be removed from the data for geologic interpretation of the paleotopographic surface in any limited area. Knowledge of the thickness of low-density material overlying the paleotopographic surface is useful in several ways. Proposed underground test sites, such as drill holes and tunnels, may be evaluated in terms of rock unit thickness and alluvial cover requirements. Recent work by the Water Resources Division of the U.S. Geological Survey has demonstrated ground-water movement through the Paleozoic rocks in the vicinity of the Nevada Test Site. Therefore, knowledge of the position of buried Paleozoic rocks is important in evaluating (a) the rate and direction of flow of the ground water, (b) ground-water supplies for domestic and industrial uses, and (c) the possibility of radioactive contamination of ground water. Finally, regional gravity trends and paleotopography are useful in working out the structural history of the area in connection with geologic studies now in progress. The purpose of this interim report is to present the major part of the gravity data obtained as of December 31, 1961. The data are presented as a complete Bouguer gravity anomaly map. Although the gravity contours are somewhat generalized because the map has a scale of 1:250,000 and a contour interval of 5 milligals, the largest anomalies are adequately delineated. Preliminary results of this gravity survey have been reported by Wilmarth and others, 1960, and by Diment and others, 1959 and 1960.

Nevada↗
USGS2018

Computing under-ice discharge: A proof-of-concept using hydroacoustics and the Probability Concept

Under-ice discharge is estimated using open-water reference hydrographs; however, the ratings for ice-affected sites are generally qualified as poor. The U.S. Geological Survey (USGS), in collaboration with the Colorado Water Conservation Board, conducted a proof-of-concept to develop an alternative method for computing under-ice discharge using hydroacoustics and the Probability Concept. The study site was located south of Minturn, Colorado (CO), USA, and was selected because of (1) its proximity to the existing USGS streamgage 09064600 Eagle River near Minturn, CO, and (2) its ease-of-access to verify discharge using a variety of conventional methods. From late September 2014 to early March 2015, hydraulic conditions varied from open water to under ice. These temporal changes led to variations in water depth and velocity. Hydroacoustics (tethered and uplooking acoustic Doppler current profilers and acoustic Doppler velocimeters) were deployed to measure the vertical-velocity profile at a singularly important vertical of the channel-cross section. Because the velocity profile was non-standard and cannot be characterized using a Power Law or Log Law, velocity data were analyzed using the Probability Concept, which is a probabilistic formulation of the velocity distribution. The Probability Concept-derived discharge was compared to conventional methods including stage-discharge and index-velocity ratings and concurrent field measurements; each is complicated by the dynamics of ice formation, pressure influences on stage measurements, and variations in cross-sectional area due to ice formation. No particular discharge method was assigned as truth. Rather one statistical metric (Kolmogorov-Smirnov; KS), agreement plots, and concurrent measurements provided a measure of comparability between various methods. Regardless of the method employed, comparisons between each method revealed encouraging results depending on the flow conditions and the absence or presence of ice cover. For example, during lower discharges dominated by under-ice and transition (intermittent open-water and under-ice) conditions, the KS metric suggests there is not sufficient information to reject the null hypothesis and implies that the Probability Concept and index-velocity rating represent similar distributions. During high-flow, open-water conditions, the comparisons are less definitive; therefore, it is important that the appropriate analytical method and instrumentation be selected. Six conventional discharge measurements were collected concurrently with Probability Concept-derived discharges with percent differences (%) of −9.0%, −21%, −8.6%, 17.8%, 3.6%, and −2.3%. This proof-of-concept demonstrates that riverine discharges can be computed using the Probability Concept for a range of hydraulic extremes (variations in discharge, open-water and under-ice conditions) immediately after the siting phase is complete, which typically requires one day. Computing real-time discharges is particularly important at sites, where (1) new streamgages are planned, (2) river hydraulics are complex, and (3) shifts in the stage-discharge rating are needed to correct the streamflow record. Use of the Probability Concept does not preclude the need to maintain a stage-area relation. Both the Probability Concept and index-velocity rating offer water-resource managers and decision makers alternatives for computing real-time discharge for open-water and under-ice conditions.

Colorado↗
USGS2017

An open source high-performance solution to extract surface water drainage networks from diverse terrain conditions

This paper describes a workflow for automating the extraction of elevation-derived stream lines using open source tools with parallel computing support and testing the effectiveness of procedures in various terrain conditions within the conterminous United States. Drainage networks are extracted from the US Geological Survey 1/3 arc-second 3D Elevation Program elevation data having a nominal cell size of 10 m. This research demonstrates the utility of open source tools with parallel computing support for extracting connected drainage network patterns and handling depressions in 30 subbasins distributed across humid, dry, and transitional climate regions and in terrain conditions exhibiting a range of slopes. Special attention is given to low-slope terrain, where network connectivity is preserved by generating synthetic stream channels through lake and waterbody polygons. Conflation analysis compares the extracted streams with a 1:24,000-scale National Hydrography Dataset flowline network and shows that similarities are greatest for second- and higher-order tributaries.

Cartography and Geographic Information Science↗
USGS2012

User guide for MODPATH version 6—A particle-tracking model for MODFLOW

MODPATH is a particle-tracking post-processing model that computes three-dimensional flow paths using output from groundwater flow simulations based on MODFLOW, the U.S. Geological Survey (USGS) finite-difference groundwater flow model. This report documents MODPATH version 6. Previous versions were documented in USGS Open-File Reports 89-381 and 94-464. The program uses a semianalytical particle-tracking scheme that allows an analytical expression of a particle's flow path to be obtained within each finite-difference grid cell. A particle's path is computed by tracking the particle from one cell to the next until it reaches a boundary, an internal sink/source, or satisfies another termination criterion. Data input to MODPATH consists of a combination of MODFLOW input data files, MODFLOW head and flow output files, and other input files specific to MODPATH. Output from MODPATH consists of several output files, including a number of particle coordinate output files intended to serve as input data for other programs that process, analyze, and display the results in various ways. MODPATH is written in FORTRAN and can be compiled by any FORTRAN compiler that fully supports FORTRAN-2003 or by most commercially available FORTRAN-95 compilers that support the major FORTRAN-2003 language extensions.

Techniques and Methods↗
USGS2008

Mineral resource of the month: antimony

The article describes the characteristics and industrial uses of antimony. Antimony, which is produced as a byproduct of mining other metals such as gold, lead or silver, is used in everything from flame retardants, batteries, ceramics and glass. It is also used in glass for television picture tubes, computer monitors, pigments and catalysts.

Earth↗
USGS1992

Public water-supply systems and water use in Tennessee, 1988

This report summarizes the results of a study conducted by the U.S. Geological Survey, in cooperation with the Tennessee Department of Environment and Conservation (TDEC), Division of Water Supply in 1988. Data gathered during an inventory by the TDEC were collated to determine water use, supply sources, population served, and design and storage capacities of the systems. The inventory was limited to systems that were active on June 30, 1988. Results of a survey of the systems conducted by the Tennessee Department of Health and Environment during 1988 were a primary source of data for this report. Data from computer and manual files maintained by the Tennessee Department of Health and Environment and the U.S. Geological Survey also were used. The Division of Water Supply, TDEC, surveyed 541 public water-supply systems. These systems served 81 percent of the population of the State, or 3.95 million people. The gross per capita use statewide for public-supplied water was 179 gallons per day. Total water withdrawals for public supply increased about 39 percent from 510 million gallons per day (Mgal/d) in 1980, to 708 Mgalld in 1988. During the same period, the population increased about 7 percent. Surface-water withdrawals accounted for 63 percent (446 Mgal/d) of the total water withdrawn in the State. All of these withdrawals occurred in the Tennessee (56 percent or 249 Mgal/d) and the Ohio (44 percent or 197 Mgalld) hydrologic regions. Ground water supplied 262 Mgal/d or 37 percent of the total water withdrawn by public-supply systems statewide. Of that amount, 79 percent, or 208 Mgalld, was used in western Tennessee.

Tennessee↗
USGS1988

Experiments with microcomputer-based artificial intelligence environments

The U.S. Geological Survey (USGS) has been experimenting with the use of relatively inexpensive microcomputers as artificial intelligence (AI) development environments. Several AI languages are available that perform fairly well on desk-top personal computers, as are low-to-medium cost expert system packages. Although performance of these systems is respectable, their speed and capacity limitations are questionable for serious earth science applications foreseen by the USGS. The most capable artificial intelligence applications currently are concentrated on what is known as the "artificial intelligence computer," and include Xerox D-series, Tektronix 4400 series, Symbolics 3600, VAX, LMI, and Texas Instruments Explorer. The artificial intelligence computer runs expert system shells and Lisp, Prolog, and Smalltalk programming languages. However, these AI environments are expensive. Recently, inexpensive 32-bit hardware has become available for the IBM/AT microcomputer. USGS has acquired and recently completed Beta-testing of the Gold Hill Systems 80386 Hummingboard, which runs Common Lisp on an IBM/AT microcomputer. Hummingboard appears to have the potential to overcome many of the speed/capacity limitations observed with AI-applications on standard personal computers. USGS is a Beta-test site for the Gold Hill Systems GoldWorks expert system. GoldWorks combines some high-end expert system shell capabilities in a medium-cost package. This shell is developed in Common Lisp, runs on the 80386 Hummingboard, and provides some expert system features formerly available only on AI-computers including frame and rule-based reasoning, on-line tutorial, multiple inheritance, and object-programming. ?? 1988 International Association for Mathematical Geology.

Mathematical Geology↗
USGS1977

The U.S. geological survey rass-statpac system for management and statistical reduction of geochemical data

RASS is an acronym for Rock Analysis Storage System and STATPAC, for Statistical Package. The RASS and STATPAC computer programs are integrated into the RASS-STATPAC system for the management and statistical reduction of geochemical data. The system, in its present form, has been in use for more than 9 yr by scores of U.S. Geological Survey geologists, geochemists, and other scientists engaged in a broad range of geologic and geochemical investigations. The principal advantage of the system is the flexibility afforded the user both in data searches and retrievals and in the manner of statistical treatment of data. The statistical programs provide for most types of statistical reduction normally used in geochemistry and petrology, but also contain bridges to other program systems for statistical processing and automatic plotting. ?? 1977.

Computers & Geosciences↗
USGS1980

Plan of study for the Northern Atlantic Coastal Plain Regional Aquifer System Analysis

Sediments of Cretaceous to Holocene age compose the Northern Atlantic Coastal Plain aquifer system in an area of 50,000 square miles in parts of New York, New Jersey, Delaware, Maryland, Virginia, and North Carolina. The aquifer system is a major source of water supply in the area. About 1.4 billion gallons is withdrawn from its aquifers each day. Increasing withdrawal of ground water has created or intensified several problems such as declining water levels, development of large cones of depression, saltwater intrusion, spreading of ground-water contamination, and land subsidence. The U.S. Geological Survey has begun a comprehensive study that will define the geology, hydrology, and geochemistry of the aquifer system. The effects of future utilization of the aquifer system will be determined and alternative plans for water withdrawal will be evaluated through computer simulation modeling. This report describes the objectives, organization, and work plans of the study, and describes the work to be accomplished in each U.S. Geological Survey District of the study area.

Delaware;Maryl;New Jersey;North Carolina;Virginia↗
USGS2003

Statistical, economic and other tools for assessing natural aggregate

Quantitative aggregate resource assessment provides resource estimates useful for explorationists, land managers and those who make decisions about land allocation, which may have long-term implications concerning cost and the availability of aggregate resources. Aggregate assessment needs to be systematic and consistent, yet flexible enough to allow updating without invalidating other parts of the assessment. Evaluators need to use standard or consistent aggregate classification and statistic distributions or, in other words, models with geological, geotechnical and economic variables or interrelationships between these variables. These models can be used with subjective estimates, if needed, to estimate how much aggregate may be present in a region or country using distributions generated by Monte Carlo computer simulations.

Bulletin of Engineering Geology and the Environmen↗
USGS1974

Effects of local geology on ground motion in the San Francisco Bay region, California: A continued study

Measurements of ground motion generated by nuclear explosions in Nevada have been completed for 99 locations in the San Francisco Bay region, California. The seismograms, Fourier amplitude spectra, spectral amplification curves for the signal, and the Fourier amplitude spectra of the seismic noise are presented for 60 locations. Analog amplifications, based on the maximum signal amplitude, are computed for an additional 39 locations. The recordings of the nuclear explosions show marked amplitude variations which are consistently related to the local geologic conditions of the recording site. The average spectral amplifications observed for vertical and horizontal ground motions are, respectively: (1, 1) for granite, (1.5, 1.6) for the Franciscan Formation, (2.3, 2.3), for other pre-Tertiary and Tertiary rocks, (3.0, 2.7) for the Santa Clara Formation, (3.3, 4.4) for older bay sediments, and (3.7, 11.3) for younger bay mud. Spectral amplification curves define predominant ground frequencies for younger bay mud sites and for some older bay sediment sites. The predominant frequencies for most sites were not clearly defined by the amplitude spectra computed from the seismic background noise. The intensities ascribed to various sites in the San Francisco Bay region for the California earthquake of April 18, 1906, are strongly dependent on distance from the zone of surface faulting and the geological character of the ground. Considering only those sites (approximately one square city block in size) for which there is good evidence for the degree of ascribed intensity, the intensities for 917 sites on Franciscan rocks generally decrease with the logarithm of distance as Intensity = 2.69 - 1.90 log (Distance Km). For sites on other geologic units, intensity increments, derived from this empirical rela.tion, correlate strongly with the Average Horizontal Spectral Amplifications (MISA) according to the empirical relation Intensity Increment= 0.27 + 2.70 log(AHSA). Average intensity increments predicted for various geologic units are -0.3 for granite, 0.2 for Franciscan Formation, 0.6 for other pre-Tertiary, Tertiary bedrock, 0.8 for Santa Clara Formation, 1 .3 for older bay sediments, 2.4 for younger bay mud. These empirical relations, together with detailed geologic maps, delineate areas in the San Francisco Bay region of potentially high intensity from future earthquakes on either the San Andreas fault or the Hayward fault.

California↗