SEARCH · Geology Reports

Results for “Advances in Water Resources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27Linked to original sources

USGS2022

Strength and memory of precipitation's control over streamflow across the conterminous United States

How precipitation (P) is translated into streamflow (Q) and over what timescales (i.e., “memory”) is difficult to predict without calibration of site-specific models or using geochemical approaches, posing barriers to prediction in ungauged basins or advancement of general theories. Here, we used a data-driven approach to identify regional patterns and exogenous controls on P–Q interactions. We applied an information flow analysis, which quantifies uncertainty reduction, to a daily time series of P and Q from 671 watersheds across the conterminous United States. We first demonstrated that information transfer from P to Q primarily reflects the quickflow component of water-budgets, based on a watershed model. Readily quantifiable information flows show a functional relationship with model parameters, suggesting utility for model calibration. Second, applied to real watersheds, P–Q information flows exhibit seasonally varying behavior within regions in a manner consistent with dominant runoff generation mechanisms. However, the timing and the magnitude of information flows also reflect considerable subregional heterogeneity, likely attributable to differences in watershed size, baseflow contributions, and variation in aerial coverage of preferential flow paths. A regression analysis showed that a combination of climate and watershed characteristics are predictive of P–Q information flows. Though information flows cannot, in most cases, uniquely determine dominant runoff mechanisms, they provide a means to quantify the heterogeneous outcomes of those mechanisms within regions, thereby serving as a benchmarking tool for models developed at the regional scale. Last, information flows characterize regionally specific ways in which catchment connectivity changes from the wet to dry season.

conterminous United States↗

USGS2013

Use of NMR logging to obtain estimates of hydraulic conductivity in the High Plains aquifer, Nebraska, USA

Hydraulic conductivity (K) is one of the most important parameters of interest in groundwater applications because it quantifies the ease with which water can flow through an aquifer material. Hydraulic conductivity is typically measured by conducting aquifer tests or wellbore flow (WBF) logging. Of interest in our research is the use of proton nuclear magnetic resonance (NMR) logging to obtain information about water-filled porosity and pore space geometry, the combination of which can be used to estimate K. In this study, we acquired a suite of advanced geophysical logs, aquifer tests, WBF logs, and sidewall cores at the field site in Lexington, Nebraska, which is underlain by the High Plains aquifer. We first used two empirical equations developed for petroleum applications to predict K from NMR logging data: the Schlumberger Doll Research equation (K SDR ) and the Timur-Coates equation (K T-C ), with the standard empirical constants determined for consolidated materials. We upscaled our NMR-derived K estimates to the scale of the WBF-logging K(K WBF-logging ) estimates for comparison. All the upscaled K T-C estimates were within an order of magnitude of K WBF-logging and all of the upscaled K SDR estimates were within 2 orders of magnitude of K WBF-logging . We optimized the fit between the upscaled NMR-derived K and KWBF-logging estimates to determine a set of site-specific empirical constants for the unconsolidated materials at our field site. We conclude that reliable estimates of K can be obtained from NMR logging data, thus providing an alternate method for obtaining estimates of K at high levels of vertical resolution.

Nebraska↗

USGS2001

Critical habitat for ovigerous Dungeness crabs

The Dungeness crab, Cancer magister , supports an important fishery in the northeastern Pacific Ocean, yet there is limited knowledge of ovigerous female brooding locations and brooding behavior. Our earlier research suggests that ovigerous crabs aggregate at the same brooding locations for many years. Within these locations, ovigerous females occur in high densities, with the majority of the aggregation buried within the sediment. These locations often have similar water depths and sediment types and appear to be critical for this life history stage. Our study was designed to examine the bathymetric distribution of Dungeness crabs in bays with and without sea otters at eight locations within the Glacier Bay area by conducting transects with a video-equipped manned submersible. Two of the bays investigated contained large aggregations of ovigerous females. At both sites the substrate was composed primarily of sand. However, only a small percentage of the 33 km of transects were classified as sand. These data suggest that sand substrate may be a limiting resource. Since crab brooding aggregations represent a large portion of the crab population within a small area, and because they are a critical component of Dungeness life history, areas with these characteristics need to be investigated, mapped, and protected from development or exploitation. The areas requiring protection from the impact of anthropogenic wastes, fishing, and logging activities could be quite small, thus limiting conflict with alternative users.

Conference Paper↗

USGS2024

Beyond the wedge: Impact of tidal streams on salinization of groundwater in a coastal aquifer stressed by pumping and sea-level rise

Saltwater intrusion (SWI) is a well-studied phenomenon that threatens the freshwater supplies of coastal communities around the world. The development and advancement of numerical models has led to improved assessment of the risk of salinization. However, these studies often fail to include the impact of surface waters as potential sources of aquifer salinity and how they may impact SWI. Based on field-collected data, we developed a regional, variable-density groundwater model using SEAWAT for east Dover, Delaware. In this location, major users of groundwater from the surficial aquifer are the City of Dover and irrigation for agriculture. Our model includes salinized marshland and tidal streams, along with irrigation and municipal pumping wells. Model scenarios were run for 100 years and included changes in pumping rates and sea-level rise (SLR). We examined how these drivers of SWI affect the extent and location of salinization in the surficial aquifer by evaluating differences in chloride concentration near surface waters and the subsurface freshwater-saltwater interface. We found the presence of the marsh inverts the typical freshwater-saltwater wedge interface and that the edge of the interface did not migrate farther inland. Additionally, we found that tidal streams are the dominant pathways of SWI at our site with salinization from streams being exacerbated by SLR. Our results also show that spatial distribution of pumping affects both the magnitude and extent of salinization, with an increase in concentrated pumping leading to more intensive salinization than a more widely distributed increase of the same total pumping volume.

Delaware↗

USGS2017

Fluorine

Fluorine compounds are essential in numerous chemical and manufacturing processes. Fluorspar is the commercial name for fluorite (isometric CaF 2 ), which is the only fluorine mineral that is mined on a large scale. Fluorspar is used directly as a fluxing material and as an additive in different manufacturing processes. It is the source of fluorine in the production of hydrogen fluoride or hydrofluoric acid, which is used as the feedstock for numerous organic and inorganic chemical compounds. The United States was the world’s leading producer of fluorspar until the mid-1950s. In the mid-1970s, the U.S. fluorspar mining industry began to decline because of foreign competition. By 1982, there was essentially only a single U.S. producer left, and that company ceased mining in 1996. Consumption of fluorspar in the United States peaked in the early 1970s, which was also the peak period of U.S. steel production. Since then, U.S. fluorspar consumption has decreased substantially; the United States has nonetheless increased its imports of downstream fluorine compounds, such as, in order of tonnage imported, hydrofluoric acid, aluminum fluoride, and cryolite. This combination of no U.S. production (until recently) and high levels of consumption has made the United States the world’s leading fluorspar-importing country, in all its various forms. The number of fluorspar-exporting countries has decreased substantially in recent decades, and, as a result, the United States has become dependent on just a few countries to supply its needs. In 2013, the United States imported the majority of its fluorspar from three countries, which were, in descending order of the amount imported, Mexico, China, and South Africa. Geologically, in igneous systems, fluorine is one of a number of elements that are “incompatible.” These incompatible elements become concentrated in the residual magma while the common silicates crystallize upon magma ascent and cooling, leading to relatively high fluorine concentrations in the more evolved or differentiated igneous rocks and in hydrothermal deposits associated with those evolved igneous rocks. In sedimentary rocks, fluorine’s highest concentrations are found in phosphorites because fluorine substitutes for hydroxyl ions in apatite, which leads to fluorine concentrations of, typically, from 2 to 4 weight percent in phosphorites. Because of the presence of fluorine, phosphate fertilizer manufacturers can produce a fluorosilicic acid byproduct. Most deposits mined for fluorine are hydrothermal, however, and consist of fluorine minerals that precipitated from hot water. Magmatic brines and brines from deep within sedimentary basins that have high concentrations of dissolved fluoride are the mineralizing fluids for various types of hydrothermal fluorspar deposits. Relatively dilute hydrothermal fluids that formed in some volcanic rocks can also transport sufficient fluoride to form a high-grade fluorspar deposit. Fluorite has low solubility in a common range of hydrothermal temperatures, particularly from about 160 degrees Celsius (°C) down to 60 °C. The increasing fluorite solubility below 60 °C partly explains why some water with exceptionally high levels of dissolved fluorine are found even at ambient temperatures in evaporitic lake basins in some East African Rift valleys in Kenya and Tanzania. The geologic conditions that led to the high concentrations there are known to exist in a number of other places in the world as well, including, perhaps, places in the Basin and Range province of the United States. Eight minerals or mineral groups have sufficient fluorine in their structures to be considered as possible ores of the element; they are bastnaesite (also spelled bastnäsite; and other fluorocarbonates), cryolite, sellaite, villiaumite, fluorite, fluorapatite (in phosphorites), various phyllosilicates, and topaz. Fluorite is currently the only mineral that is mined for fluorine, and nomineral except fluorite is likely to become a source of commercially produced fluorine as a primary product as long as supplies from relatively thick and high-grade fluorite deposits continue to be available. At least seven classes (which include one subclass) of hydrothermal fluorite deposits are recognized; they are classified according to their tectonic and (or) magmatic settings, as follows: (1) carbonatite-related fluorspar deposits; (2) alkaline-intrusion-related fluorspar deposits; (3) alkaline-volcanic-related epithermal fluorspar deposits; (4) Mississippi Valley-type fluorspar deposits (and a subclass of salt-related carbonate-hosted fluorspar deposits); (5) fluorspar deposits related to strongly differentiated granites; (6) subalkaline-volcanic-related epithermal fluospar deposits; and (7) fluorspar deposits that appear to be conformable within tuffaceous limy lacustrine sediments. An eighth class (not hydrothermal) is that of fluorspar deposits concentrated in soils and weathered zones; that is, residual fluorspar deposits. Generally, fluorspar deposits related to strongly differentiated granites have larger tonnages and lower grades than carbonatite-related fluorspar deposits, which, in turn, have larger tonnages and lower grades than fluorspar vein deposits from various other classes. The United States has a few identified resources of fluorspar, most notably the Klondike II property in the Illinois- Kentucky fluorspar district located about 8 kilometers southwest of Salem, Kentucky, which has a large vein that contains at least 1.6 million metric tons at a grade of 60 percent CaF 2 (Feytis, 2009). Additional fluorspar resources of lower grade but larger tonnage have been identified at Hicks Dome in the Illinois-Kentucky fluorspar district and at Lost River near the western tip of the Seward Peninsula in Alaska, along with a couple of dozen smaller, higher grade resources. Internationally, new mines that either opened before the beginning of 2013 or were scheduled to open soon after that time include the Nui Phao tungsten-fluorspar-bismuth-copper-gold deposit in northern Vietnam; the St. Lawrence project in Newfoundland, Canada, which is located in a well-known fluorspar district; the Bamianshan deposit, which is related to a strongly differentiated granite in northwestern Zhejiang Province, China, near some of that Province’s large, subalkaline-volcanic-related epithermal veins; and the Nokeng project in South Africa, which is also related to a strongly differentiated granite. Other deposits in northwestern Australia, Nevada (United States), Norway, South Africa, and Sweden have been identified and could be put into production within just a few years. Among undiscovered resources, an interesting possibility might be to produce a fluorine product from evaporitic, high-fluorine, high-pH sodium-carbonate brines like Lake Magadi (Kenya) and Lake Natron (Tanzania) in Africa’s Eastern Rift Valley. In addition, apparently conformable fluorspar deposits in tuffaceous limy lacustrine sediments, such as those in Italy, are likely to occur in similar young alkalic volcanic settings elsewhere in the world. Modern geophysical and geochemical exploration techniques have typically not been brought to bear in exploration for new fluorspar deposits, although such techniques are likely to be used in future exploration. The tendency for fluorine to dissolve in significant concentrations in water at low temperature allows both surface water and groundwater to be used as sampling media in geochemical exploration. Evolved granite-related fluorspar deposits may be particularly susceptible to geophysical exploration methods because crystalline rocks that form a basement to sedimentary sections can be approximately defined with gravity and magnetic methods, and magnetite-bearing skarns can be directly detected with magnetic surveys. Environmental considerations of fluorine mining focus especially on drinking water, where high fluorine concentrations can lead to tooth decay; dental and skeletal fluorosis; and bone and cartilage conditions, including genu valgum, which is the crippling bone deformity more commonly known as knock knee. Trace amounts of other elements in fluorspar ores are a concern at some deposits; for example, high beryllium concentrations in alkaline-volcanic-related epithermal deposits or high cadmium concentrations associated with Mississippi Valley-type and salt-related carbonate-hosted fluorspar deposits. Future research might include testing whether fluorine can be extracted economically from high-pH, sodium-carbonate brines and exploring for new occurrences of apparently conformable fluorspar deposits in tuffaceous limy lacustrine sediments outside of the Latium Region of Italy. Other promising new areas of research could be studies of fluorspar deposit fluid inclusion compositions by quadrupole mass spectrometry, by noble gas mass spectrometry on irradiated fluid inclusions, or by chlorine isotopes, while also measuring the chemistry of the same fluid inclusions either by bulk crush-and-leach methods or by laser ablation-inductively coupled plasma mass spectrometry. Advanced studies of fluid inclusion chemistry could be applied beneficially to some of the enigmatic large epithermal fluorspar veins at various places in the world, where they might determine those deposits’ possible relationships to igneous intrusions, or to dissolved salt, or to heated meteoric water in volcanic sections, or perhaps to all three. This knowledge could help focus new exploration.

Professional Paper↗

USGS2018

Exploring drivers of regional water-quality change using differential spatially referenced regression – A pilot study in the Chesapeake Bay watershed

An understanding of riverine water-quality dynamics in regional mixed-land use watersheds is the foundation for advances in landscape biogeochemistry and informed land management. A differential implementation of the statistical/process-based model SPAtially Referenced Regressions on Watershed attributes (SPARROW; Smith et al., https://doi.org/10.1029/97wr02171 ) is proposed to empirically relate a regional pattern of changes in flow-normalized constituent flux, over a multiyear period, to contemporaneous changes in spatially referenced explanatory variables. In a pilot application, the differential model, called Spatiotemporal Watershed Accumulation of Net effects (SWAN), is used to explore factors influencing changes in flow-normalized flux of total nitrogen over the period 1990–2010 at 43 sites in the nontidal Chesapeake Bay watershed. A seven-parameter model explains 80% of the transformed variability in independently estimated flux changes, indicating that storage effects having characteristic time scales greater than 20 years had a small influence, relative to changes in inputs, on regional water-quality response. Results suggest that 1990–2010 changes in total-nitrogen flux are largely the outcome of increased nonpoint-source pollution associated with urban and suburban development, modulated to the point of negation by terrestrial losses stemming from widespread increases in air temperature and precipitation. The loss mechanism is qualitatively consistent with denitrification; however, increases in aboveground biomass, agricultural nitrogen exports, or hydrologic flushing are also plausible contributors. Although qualified by a small sample size and constraints on explanatory data availability, the pilot suggests that SWAN is a promising approach for broadening scientific understanding of factors driving regional water-quality change and for supporting evidence-based land-management decisions.

Chesapeake Bay watershed↗

USGS2002

Application of advanced geophysical logging methods in the characterization of a fractured-sedimentary bedrock aquifer, Ventura County, California

An integrated suite of advanced geophysical logging methods was used to characterize the geology and hydrology of three boreholes completed in fractured-sedimentary bedrock in Ventura County, California. The geophysical methods included caliper, gamma, electromagnetic induction, borehole deviation, optical and acoustic televiewer, borehole radar, fluid resistivity, temperature, and electromagnetic flowmeter. The geophysical logging 1) provided insights useful for the overall geohydrologic characterization of the bedrock and 2) enhanced the value of information collected by other methods from the boreholes including core-sample analysis, multiple-level monitoring, and packer testing. The logged boreholes, which have open intervals of 100 to 200 feet, penetrate a sequence of interbedded sandstone and mudstone with bedding striking 220 to 250 degrees and dipping 15 to 40 degrees to the northwest. Fractures intersected by the boreholes include fractures parallel to bedding and fractures with variable strike that dip moderately to steeply. Two to three flow zones were detected in each borehole. The flow zones consist of bedding-parallel or steeply dipping fractures or a combination of bedding-parallel fractures and moderately to steeply dipping fractures. About 75 to more than 90 percent of the measured flow under pumped conditions was produced by only one of the flow zones in each borehole.

California↗

USGS2006

Evaluating uncertainty in predicting spatially variable representative elementary scales in fractured aquifers, with application to Turkey Creek Basin, Colorado

Computational limitations and sparse field data often mandate use of continuum representation for modeling hydrologic processes in large‐scale fractured aquifers. Selecting appropriate element size is of primary importance because continuum approximation is not valid for all scales. The traditional approach is to select elements by identifying a single representative elementary scale (RES) for the region of interest. Recent advances indicate RES may be spatially variable, prompting unanswered questions regarding the ability of sparse data to spatially resolve continuum equivalents in fractured aquifers. We address this uncertainty of estimating RES using two techniques. In one technique we employ data‐conditioned realizations generated by sequential Gaussian simulation. For the other we develop a new approach using conditioned random walks and nonparametric bootstrapping (CRWN). We evaluate the effectiveness of each method under three fracture densities, three data sets, and two groups of RES analysis parameters. In sum, 18 separate RES analyses are evaluated, which indicate RES magnitudes may be reasonably bounded using uncertainty analysis, even for limited data sets and complex fracture structure. In addition, we conduct a field study to estimate RES magnitudes and resulting uncertainty for Turkey Creek Basin, a crystalline fractured rock aquifer located 30 km southwest of Denver, Colorado. Analyses indicate RES does not correlate to rock type or local relief in several instances but is generally lower within incised creek valleys and higher along mountain fronts. Results of this study suggest that (1) CRWN is an effective and computationally efficient method to estimate uncertainty, (2) RES predictions are well constrained using uncertainty analysis, and (3) for aquifers such as Turkey Creek Basin, spatial variability of RES is significant and complex.

Water Resources Research↗

USGS2022

Potential effects of energy development on environmental resources of the Williston Basin in Montana, North Dakota, and South Dakota—Executive summary

Executive Summary The Williston Basin, which includes parts of Montana, North Dakota, and South Dakota in the United States and parts of Manitoba and Saskatchewan in Canada, has been explored as a potential source of energy resources since the early 20th century; however, commercially viable petroleum drilling and recovery began in earnest in the 1950s. When oil prices rose in the mid-1980s, the number of wells also increased and then subsequently declined. Interest in the Williston Basin increased again in the mid-2000s with the application of new drilling technology. Since then, development has increased rather quickly. Most of this new development has been facilitated by advances in horizontal drilling and hydraulic fracturing technologies. The North Dakota Department of Mineral Resources reported an increase of more than 10,000 producing wells between 2000 and the spring of 2016. In total, 84 percent of those 10,000 wells target the Bakken Formation, which is now home to one of the Nation’s largest energy booms. Current estimates suggest that exploration and drilling activities are expected to continue for the next 20 to 50 years; however, future activity will likely ebb and flow in response to energy prices. Although most energy has been developed on non-Federal property, more than 2,000 wells were started on federally managed lands in the three States that contain the Williston Basin between 2004 and 2015, though these numbers do not reflect whether or not these wells targeted the Bakken Formation. Executive Order no. 13604 (March 22, 2012) directs Federal agencies to improve the timeliness of the permitting process for extracting publically owned minerals, while minimizing negative environmental effects. This means that Federal agencies need information about how energy development may affect other resources they are tasked with managing. One example of where information about potential effects of development may be useful is the Bureau of Land Management’s permitting process. Permits may include stipulations or special conditions that limit unforeseen negative consequences or ameliorate potential conflicts of future development. Federal agencies also need to coordinate permitting actions to ensure that development complies with existing regulations (for example, the Endangered Species Act [16 U.S.C. § 1531 et seq.] or the National Environmental Protection Act [42 U.S.C. § 4321 et seq.]) without unnecessarily restricting or delaying development. Part of this coordination entails agreeing on the information that will be used to assess the potential effects of energy development, which should also improve efficiency of the permitting process. Within the Williston Basin, a group of Federal agencies called the Bakken Federal Executive Group is developing coordination strategies for numerous energy-related issues on Federal lands. This report was developed in cooperation with the Bureau of Land Management to provide them with the best available scientific information to support documentation of potential effects on resources that Federal agencies manage. This report summarizes information about the effects of energy development on air, water, and biological resources within the U.S. part of the Williston Basin. The topics discussed in the report were based on a prioritized list of information needs elicited from the Bakken Federal Executive Group. The list was developed using a process known as structured decision making or decision analysis. This process began with an initial scoping workshop to determine the range of decisions made by those involved directly in managing energy development and resources on public land. U.S. Geological Survey staff then developed a simple quantitative ranking tool to assess which information needs were of greatest importance to those decisions.

Montana, North Dakota, South Dakota↗

USGS2013

Nutrient and sediment concentrations, yields, and loads in impaired streams and rivers in the Taunton River Basin, Massachusetts, 1997-2008

Rapid development, population growth, and the changes in land and water use accompanying development are placing increasing stress on water resources in the Taunton River Basin. An assessment by the Massachusetts Department of Environmental Protection determined that a number of tributary streams to the Taunton River are impaired for a variety of beneficial uses because of nutrient enrichment. Most of the impaired reaches are in the Matfield River drainage area in the vicinity of the City of Brockton. In addition to impairments of stream reaches in the basin, discharge of nutrient-rich water from the Taunton River contributes to eutrophication of Mount Hope and Narragansett Bays. To assess water quality and loading in the impaired tributary stream reaches in the basin, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection compiled existing water-quality data from previous studies for the period 1997-2006, developed and calibrated a Hydrological Simulation Program-FORTRAN (HSPF) precipitation-runoff model to simulate streamflow in areas of the basin that contain the impaired reaches for the same time period, and collected additional streamflow and water-quality data from sites on the Matfield and Taunton Rivers in 2008. A majority of the waterquality samples used in the study were collected between 1999 and 2006. Overall, the concentration, yield, and load data presented in this report represent water-quality conditions in the basin for the period 1997-2008. Water-quality data from 52 unique sites were used in the study. Most of the samples from previous studies were collected between June and September under dry weather conditions. Simulated or measured daily mean streamflow and water-quality data were used to estimate constituent yields and loads in the impaired tributary stream reaches and the main stem of the Taunton River and to develop yield-duration plots for reaches with sufficient water-quality data. Total phosphorus concentrations in the impaired-reach areas ranged from 0.0046 to 0.91 milligrams per liter (mg/L) in individual samples (number of samples (n)=331), with a median of 0.090 mg/L; total nitrogen concentrations ranged from 0.34 to 14 mg/L in individual samples (n=139), with a median of 1.35 mg/L; and total suspended solids concentrations ranged from 2/d) for total phosphorus and 100 lb/mi 2 /d for total nitrogen in these reaches. In most of the impaired reaches not affected by the Brockton Advanced Water Reclamation Facility outfall, yields were lower than in reaches downstream from the outfall, and the difference between measured and threshold yields was fairly uniform over a wide range of flows, suggesting that multiple processes contribute to nonpoint loading in these reaches. The Northeast and Mid-Atlantic SPAtially-Referenced Regression On Watershed (SPARROW) models for total phosphorus and total nitrogen also were used to estimate annual nutrient loads in the impaired tributary stream reaches and main stem of the Taunton River and predict the distribution of these loads among point and diffuse sources in reach drainage areas. SPARROW is a regional, statistical model that relates nutrient loads in streams to upstream sources and land-use characteristics and can be used to make predictions for streams that do not have nutrient-load data. The model predicts mean annual loads based on longterm streamflow and water-quality data and nutrient source conditions for the year 2002. Predicted mean annual nutrient loads from the SPARROW models were consistent with the measured yield and load data from sampling sites in the basin. For conditions in 2002, the Brockton Advanced Water Reclamation Facility outfall accounted for over 75 percent of the total nitrogen load and over 93 percent of the total phosphorus load in the Salisbury Plain and Matfield Rivers downstream from the outfall. Municipal point sources also accounted for most of the load in the main stem of the Taunton River. Multiple municipal wastewater discharges in the basin accounted for about 76 and 46 percent of the delivered loads of total phosphorus and total nitrogen, respectively, to Mount Hope Bay. For similarly sized watersheds, total delivered loads were lower in watersheds without point sources compared to those with point sources, and sources associated with developed land accounted for most of the delivered phosphorus and nitrogen loads to the impaired reaches. The concentration, yield, and load data evaluated in this study may not be representative of current (2012) point-source loading in the basin; in particular, most of the water-quality data used in the study (1999-2006) were collected prior to completion of upgrades to the Brockton Advanced Water Reclamation Facility that reduced total phosphorus and nitrogen concentrations in treated effluent. Effluent concentration data indicate that, for a given flow rate, effluent loads of total phosphorus and total nitrogen declined by about 80 and 30 percent, respectively, between the late 1990s and 2008 in response to plant upgrades. Consequently, current (2012) water-quality conditions in the impaired reaches downstream from the facility likely have improved compared to conditions described in the report.

Massachusetts↗

USGS2014

Reconnaissance of pharmaceuticals and wastewater indicators in streambed sediments of the lower Columbia River basin, Oregon and Washington

One by-product of advances in modern chemistry is the accumulation of synthetic chemicals in the natural environment. These compounds include contaminants of emerging concern (CECs), some of which are endocrine disrupting compounds (EDCs) that can have detrimental reproductive effects. The role of sediments in accumulating these types of chemicals and acting as a source of exposure for aquatic organisms is not well understood. Here we present a small-scale reconnaissance of CECs in bed sediments of the lower Columbia River and several tributaries and urban streams. Surficial bed sediment samples were collected from the Columbia River, the Willamette River, the Tualatin River, and several small urban creeks in Oregon. Thirty-nine compounds were detected at concentrations ranging from <1 to >1,000 ng [g sediment] -1 dry weight basis. Columbia River mainstem, suggesting a higher risk of exposure to aquatic life in lower order streams. Ten known or suspected EDCs were detected during the study. At least one EDC was detected at 21 of 23 sites sampled; several EDCs were detected in sediment from most sites. This study is the first to document the occurrence of a large suite of CECs in the sediments of the Columbia River basin. A better understanding of the role of sediment in the fate and effects of emerging contaminants is needed.

Oregon;Washington↗

USGS2024

Prefabricated Zero Ascend Omnispecies (ZAO) modular fish passage modules using advanced manufacturing techniques

The Zero Ascend Omnispecies (ZAO) fish passage attraction module “ZAO Attractor” is a novel system designed to facilitate upstream passage for a broad spectrum of fish species, with a particular focus on American shad and river herring (alewife and/or blueback herring). Combining the use of prefabricated, modular components with advanced manufacturing, the ZAO aims to provide a cost-effective and scalable solution for fish passage attractions across various hydropower sites. The system features a surface level entry, so fish do not need to climb. In addition, it is designed to be adjusted and repositioned to create the most effective attraction flows by managing the outflows from hydropower turbines. Budget Period 1 (BP1) focused on the design and modeling of the ZAO Attractor and demonstrated the engineering feasibility of a modular, prefabricated, hydrodynamically efficient structure with surface level entry and passage. During BP1, the hypothesis was that certain structural adaptations, such as the addition of long fins, could direct turbine outflows to create a desirable downstream flow. Simulations, however, were inconclusive, revealing the complex nature of fish preferences for hydraulic conditions. It was discovered that there were limited published studies on the direct correlation between quantified flow patterns and fish attraction, emphasizing the need for controlled studies to observe and measure these effects. In Budget Period 2 (BP2), controlled studies with live fish were prioritized to address these complexities. A partially scaled ZAO Attractor was evaluated in laboratory conditions using native river water to assess its capability to attract and guide fish. Despite challenges with flume flow conditions and the impact of flume dimensions on flow directionality and velocity, the studies provided insights into fish behavior and preferences, particularly the requirement for a consistent flow stream for migration cues. Adjustments to the fin structure demonstrated potential effectiveness in guiding fish toward the module. However, the hydraulic conditions within the flume environment did not accurately reflect typical in-river scenarios, therefore the results were inconclusive with respect to the optimal system configuration for in-river use. In the future, conducting comprehensive field studies can enhance understanding of the interactions between fish behavior and flow conditions created by the ZAO Attractor. Additionally, a design review is advised, particularly regarding the load scenarios throughout the seasons and positioning of the ZAO Attractor. These studies should continue to refine the design to achieve its intended benefits: economical and effective fish attraction and passage that can be adapted to specific site conditions while allowing for continued energy generation at sites up for re-licensure and adding hydropower generation to previously untapped resources in non-powered dams and new stream reaches. In conclusion, the ZAO fish passage attraction module presents a promising approach to fish passage at hydropower stations, with the potential to balance environmental concerns with renewable energy development. However, further field validation and optimization are necessary to ensure its effectiveness and practicality in real-world applications.

Final Technical Report↗

USGS2015

On the use of rhodamine WT for the characterization of stream hydrodynamics and transient storage

Recent advances in fluorometry have led to increased use of rhodamine WT as a tracer in streams and rivers. In light of this increased use, a review of the dye's behavior in freshwater systems is presented. Studies in the groundwater literature indicate that rhodamine WT is transported nonconservatively, with sorption removing substantial amounts of tracer mass. Column studies document a two-step breakthrough curve in which two structural isomers are chromatographically separated. Although the potential for nonconservative transport is acknowledged in the surface water literature, many studies assume that sorptive losses will not affect the characterization of physical transport processes. A literature review and modeling analysis indicates that this assumption is valid for quantification of physical properties that are based on the bulk of the tracer mass (traveltime), and invalid for the characterization of processes represented by the tracer tail (transient storage attributable to hyporheic exchange). Rhodamine WT should be considered nonconservative in the hyporheic zone due to nonconservative behavior demonstrated for similar conditions in groundwater. As such, rhodamine WT should not be used as a quantitative tracer in hyporheic zone investigations, including the study of long flow paths and the development of models describing hyporheic zone processes. Rhodamine WT may be used to qualitatively characterize storage in large systems, where there are few practical alternatives. Qualitative investigations should rely on early portions of the tracer profile, making use of the temporal resolution afforded by in situ fluorometry, while discarding later parts of the tracer profile that are adversely affected by sorption.

Water Resources Research↗

USGS2008

Analytical and numerical analyses of an unconfined aquifer test considering unsaturated zone characteristics

A 7-d, constant rate aquifer test conducted by University of Waterloo researchers at Canadian Forces Base Borden in Ontario, Canada, is useful for advancing understanding of fluid flow processes in response to pumping from an unconfined aquifer. Measured data include not only drawdown in the saturated zone but also volumetric soil moisture measured at various times and distances from the pumped well. Analytical analyses were conducted with the model published in 2001 by Moench and colleagues, which allows for gradual drainage but does not include unsaturated zone characteristics, and the model published in 2006 by Mathias and Butler, which assumes that moisture retention and relative hydraulic conductivity (RHC) in the unsaturated zone are exponential functions of pressure head. Parameters estimated with either model yield good matches between measured and simulated drawdowns in piezometers. Numerical analyses were conducted with two versions of VS2DT: one that uses traditional Brooks and Corey functional relations and one that uses a RHC function introduced in 2001 by Assouline that includes an additional parameter that accounts for soil structure and texture. The analytical model of Mathias and Butler and numerical model of VS2DT with the Assouline model both show that the RHC function must contain a fitting parameter that is different from that used in the moisture retention function. Results show the influence of field-scale heterogeneity and suggest that the RHC at the Borden site declines more rapidly with elevation above the top of the capillary fringe than would be expected if the parameters were to reflect local- or core-scale soil structure and texture.

Water Resources Research↗

USGS2010

Use of Continuous Monitors and Autosamplers to Predict Unmeasured Water-Quality Constituents in Tributaries of the Tualatin River, Oregon

Management of water quality in streams of the United States is becoming increasingly complex as regulators seek to control aquatic pollution and ecological problems through Total Maximum Daily Load programs that target reductions in the concentrations of certain constituents. Sediment, nutrients, and bacteria, for example, are constituents that regulators target for reduction nationally and in the Tualatin River basin, Oregon. These constituents require laboratory analysis of discrete samples for definitive determinations of concentrations in streams. Recent technological advances in the nearly continuous, in situ monitoring of related water-quality parameters has fostered the use of these parameters as surrogates for the labor intensive, laboratory-analyzed constituents. Although these correlative techniques have been successful in large rivers, it was unclear whether they could be applied successfully in tributaries of the Tualatin River, primarily because these streams tend to be small, have rapid hydrologic response to rainfall and high streamflow variability, and may contain unique sources of sediment, nutrients, and bacteria. This report evaluates the feasibility of developing correlative regression models for predicting dependent variables (concentrations of total suspended solids, total phosphorus, and Escherichia coli bacteria) in two Tualatin River basin streams: one draining highly urbanized land (Fanno Creek near Durham, Oregon) and one draining rural agricultural land (Dairy Creek at Highway 8 near Hillsboro, Oregon), during 2002-04. An important difference between these two streams is their response to storm runoff; Fanno Creek has a relatively rapid response due to extensive upstream impervious areas and Dairy Creek has a relatively slow response because of the large amount of undeveloped upstream land. Four other stream sites also were evaluated, but in less detail. Potential explanatory variables included continuously monitored streamflow (discharge), stream stage, specific conductance, turbidity, and time (to account for seasonal processes). Preliminary multiple-regression models were identified using stepwise regression and Mallow's Cp, which maximizes regression correlation coefficients and accounts for the loss of additional degrees of freedom when extra explanatory variables are used. Several data scenarios were created and evaluated for each site to assess the representativeness of existing monitoring data and autosampler-derived data, and to assess the utility of the available data to develop robust predictive models. The goodness-of-fit of candidate predictive models was assessed with diagnostic statistics from validation exercises that compared predictions against a subset of the available data. The regression modeling met with mixed success. Functional model forms that have a high likelihood of success were identified for most (but not all) dependent variables at each site, but there were limitations in the available datasets, notably the lack of samples from high-flows. These limitations increase the uncertainty in the predictions of the models and suggest that the models are not yet ready for use in assessing these streams, particularly under high-flow conditions, without additional data collection and recalibration of model coefficients. Nonetheless, the results reveal opportunities to use existing resources more efficiently. Baseline conditions are well represented in the available data, and, for the most part, the models reproduced these conditions well. Future sampling might therefore focus on high flow conditions, without much loss of ability to characterize the baseline. Seasonal cycles, as represented by trigonometric functions of time, were not significant in the evaluated models, perhaps because the baseline conditions are well characterized in the datasets or because the other explanatory variables indirectly incorporate seasonal aspects. Multicollinearity among independent variabl

Scientific Investigations Report↗

USGS2000

Controls on nitrogen flux in alpine/subalpine watersheds of Colorado

High‐altitude watersheds in the Front Range of Colorado show symptoms of advanced stages of nitrogen excess, despite having less nitrogen in atmospheric deposition than other regions where watersheds retain nitrogen. In two alpine/subalpine subbasins of the Loch Vale watershed, atmospheric deposition of NO 3 − plus NH 4 + was 3.2–5.5 kg N ha −1 , and watershed export was 1.8–3.9 kg N ha −1 for water years 1992–1997. Annual N export increased in years with greater input of N, but most of the additional N was retained in the watershed, indicating that parts of the ecosystem are nitrogen‐limited. Dissolved inorganic nitrogen (DIN) concentrations were greatest in subsurface water of talus landscapes, where mineralization and nitrification augment high rates of atmospheric deposition of N. Tundra landscapes had moderately high DIN concentrations, whereas forest and wetland landscapes had low concentrations, indicating little export of nitrogen from these landscapes. Between the two subbasins the catchment of Icy Brook had greater retention of nitrogen than that of Andrews Creek because of landscape and hydrologic characteristics that favor greater N assimilation in both the terrestrial and aquatic ecosystems. These results suggest that export of N from alpine/subalpine watersheds is caused by a combination of direct flushing of N from atmospheric deposition and release of N from ecosystem biogeochemical processes (N cycling). Sensitivity of alpine ecosystems in the western United States to atmospheric deposition of N is a function of landscape heterogeneity, hydrologic flow paths, and climatic extremes that limit primary productivity and microbial activity, which, in turn, control retention and release of nitrogen. Conceptual and mechanistic models of N excess that have been developed for forested ecosystems need to be modified in order to predict the response of alpine ecosystems to future changes in climate and atmospheric deposition of N.

Water Resources Research↗

USGS2009

Numerical simulation of dune-flat bed transition and stage‐discharge relationship with hysteresis effect

This work presents recent advances on morphodynamic modeling of bed forms under unsteady discharge. This paper includes further development of a morphodynamic model proposed earlier by Giri and Shimizu (2006a). This model reproduces the temporal development of river dunes and accurately replicates the physical properties associated with bed form evolution. Model results appear to provide accurate predictions of bed form geometry and form drag over bed forms for arbitrary steady flows. However, accurate predictions of temporal changes of form drag are key to the prediction of stage‐discharge relation during flood events. Herein, the model capability is extended to replicate the dune–flat bed transition, and in turn, the variation of form drag produced by the temporal growth or decay of bed forms under unsteady flow conditions. Some numerical experiments are performed to analyze hysteresis of the stage‐discharge relationship caused by the transition between dune and flat bed regimes during rising and falling stages of varying flows. The numerical model successfully simulates dune–flat bed transition and the associated hysteresis of the stage‐discharge relationship; this is in good agreement with physical observations but has been treated in the past only using empirical methods. A hypothetical relationship for a sediment parameter (the mean step length) is proposed to a first level of approximation that enables reproduction of the dune–flat bed transition. The proposed numerical model demonstrates its ability to address an important practical problem associated with bed form evolution and flow resistance in varying flows.

Water Resources Research↗

USGS2019

A parametric numerical analysis of factors controlling ground ruptures caused by groundwater pumping

A modeling analysis is used to investigate the relative susceptibility of various hydrogeologic configurations to aseismic rupture generation due to deformation of aquifer systems accompanying groundwater pumping. An advanced numerical model (GEPS3D) is used to simulate rupture generation and propagation for three typical processes: (i) reactivation of a preexisting fault, (ii) differential compaction due to variations in thickness of aquifer/aquitard layers constituting the aquifer system, and (iii) tensile fracturing above a bedrock ridge that forms the base of the aquifer system. A sensitivity analysis is developed to address the relative importance of various factors, including aquifer depletion, aquifer thickness, the possible uneven distribution and depth below land surface of the aquifer/aquitard layers susceptible to aquifer-system compaction, and the height of bedrock ridges beneath the aquifer system which contributes to thinning of the aquifer system. The rupture evolution is classified in two occurrences. In one, the rupture develops at the top of the aquifer or at land surface and does not propagate. In the other, the developed rupture propagates from the aquifer top toward the land surface and/or from the land surface downward. The aquifer depth is the most important factor controlling rupture evolution. Specifically, the probability of a significant rupture propagation is higher when the aquifer top is near land surface. The numerical results are processed by a statistical regression analysis to provide a general methodology for a preliminary evaluation of possible ruptures development in exploited aquifer systems susceptible to aquifer-system compaction and accompanying land subsidence. A comparison with a few representative case studies in Arizona, USA, China, and Mexico supports the study outcomes.

Arizona↗