Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

The shapes of beach pebbles

There is much confusion in geologic literature as to the shapes of fluvial and beach pebbles and the differences between them, if differences exist. Though the contrary has been asserted, most geologists who have written on the subject appear to hold the view that beach pebbles are generally flatter than river pebbles, having discoid, lozenge-shaped, ellipsoid, or oval forms. It is asserted by some that these forms are produced by pushing of the rock fragments to and fro by the waves. Others have considered that the shapes of the original fragments and the inherent structure of the rock are dominant in determining the shapes of beach pebbles, and with this view the writer is in accord. That beach pebbles, even those composed of massive igneous rocks are commonly of a flattened oval form seems certain, as has been stated elsewhere, but this fact is probably to be attributed to the development of such forms from original flat fragments or from rocks of schistose structure or to the segregation of such forms under the peculiar action of the waves, rather than to their production by a specialized wave abrasion.

Connecticut;Massachusetts↗

Summary appraisals of the nation's ground-water resources – Arkansas-White-Red region

The Arkansas-White-Red Region, an area of265,000 square miles (6.86x10 11 square metres), is characterized by diversity in geography, climate, and geology and, in turn, by diversity in water resources and water problems. The western semiarid part of the region is water deficient, that is, potential evapotranspiration exceeds precipitation. The eastern, humid part has a surplus. Water use in the region in 1970 averaged 10 billion gallons per day (438 cubic metres per second), of which more than 65 percent was ground water. The largest use of ground water was for irrigation of crops, mostly in the water-deficient areas of Texas, Oklahoma, Kansas, and Colorado. Because of its ready availability and widespread occurrence, ground water is used throughout the region to supply municipal and rural water needs. The most productive aquifers, capable of yielding more than 50 gallons per minute (0.0032 cubic metres per second) to individual wells, are alluvium, carbonate. rocks, gypsum, and sandstone. Fresh water in storage in aquifers in the region is estimated to be 2 billion acre-feet (2.5x10 12 cubic metres). In addition, a large, unmeasured volume of saline water (containing more than 1,000 milligrams per litre of dissolved solids) underlies the fresh water at depths generally less than 500 feet (150 metres). The flow of water in each aquifer depends upon the physical and hydrologic characteristics of the aquifer, the climate, and the relation to, and the character of, adjacent rocks and streams. These factors also determine the effect of water-supply development or other man-induced stresses on the flow and the quality of water in the aquifers. Analog and digital models of aquifers can be used to evaluate stresses on aquifers and thereby provide water managers and planners with efficient tools for planning the development and continued use of aquifers.

Arkansas, Colorado, Kansas, Louisiana, Missouri, N↗

Geochemistry, Comparative Analysis, and Physical and Chemical Characteristics of the Thermal Waters East of Hot Springs National Park, Arkansas, 2006-09

A study was conducted by the U.S Geological Survey in cooperation with the Arkansas State Highway and Transportation Department to characterize the source and hydrogeologic conditions responsible for thermal water in a domestic well 5.5 miles east of Hot Springs National Park, Hot Springs, Arkansas, and to determine the degree of hydraulic connectivity between the thermal water in the well and the hot springs in Hot Springs National Park. The water temperature in the well, which was completed in the Stanley Shale, measured 33.9 degrees Celsius, March 1, 2006, and dropped to 21.7 degrees Celsius after 2 hours of pumping - still more than 4 degrees above typical local groundwater temperature. A second domestic well located 3 miles from the hot springs in Hot Springs National Park was discovered to have a thermal water component during a reconnaissance of the area. This second well was completed in the Bigfork Chert and field measurement of well water revealed a maximum temperature of 26.6 degrees Celsius. Mean temperature for shallow groundwater in the area is approximately 17 degrees Celsius. The occurrence of thermal water in these wells raised questions and concerns with regard to the timing for the appearance of the thermal water, which appeared to coincide with construction (including blasting activities) of the Highway 270 bypass-Highway 70 interchange. These concerns were heightened by the planned extension of the Highway 270 bypass to the north - a corridor that takes the highway across a section of the eroded anticlinal complex responsible for recharge to the hot springs of Hot Springs National Park. Concerns regarding the possible effects of blasting associated with highway construction near the first thermal well necessitated a technical review on the effects of blasting on shallow groundwater systems. Results from available studies suggested that propagation of new fractures near blasting sites is of limited extent. Vibrations from blasting can result in rock collapse for uncased wells completed in highly fractured rock. However, the propagation of newly formed large fractures that potentially could damage well structures or result in pirating of water from production wells appears to be of limited possibility based on review of relevant studies. Characteristics of hydraulic conductivity, storage, and fracture porosity were interpreted from flow rates observed in individual wells completed in the Bigfork Chert and Stanley Shale; from hydrographs produced from continuous measurements of water levels in wells completed in the Arkansas Novaculite, the Bigfork Chert, and Stanley Shale; and from a potentiometric-surface map constructed using water levels in wells throughout the study area. Data gathered from these three separate exercises showed that fracture porosity is much greater in the Bigfork Chert relative to that in the Stanley Shale, shallow groundwater flows from elevated recharge areas with exposures of Bigfork Chert along and into streams within the valleys formed on exposures of the Stanley Shale, and there was no evidence of interbasin transfer of groundwater within the shallow flow system. Fifteen shallow wells and two cold-water springs were sampled from the various exposed formations in the study area to characterize the water quality and geochemistry for the shallow groundwater system and for comparison to the geochemistry of the hot springs in Hot Springs National Park. For the quartz formations (novaculite, chert, and sandstone formations), total dissolved solids concentrations were very low with a median concentration of 23 milligrams per liter, whereas the median concentration for groundwater from the shale formations was 184 milligrams per liter. Ten hot springs in Hot Springs National Park were sampled for the study. Several chemical constituents for the hot springs, including pH, total dissolved solids, major cations and anions, and trace metals, show similarity with the shale formations

Scientific Investigations Report↗

Baseline water-quality sampling to infer nutrient and contaminant sources at Kaloko-Honokōhau National Historical Park, Island of Hawai‘i, 2009

Baseline water-quality sampling was conducted for dissolved nutrients and for chemical and isotopic tracers at Kaloko-Honokōhau National Historical Park on the Island of Hawai'i. Existing and future urbanization in the surrounding areas have the potential to affect water quality in the Park, and so the National Park Service and the U.S. Geological Survey designed a water-sampling strategy to document baseline conditions against which future changes can be compared. Sites in and near the Park were sampled twice, in July and December 2009, and included four anchialine pools, two large fishponds, five monitoring wells, an upland production well, tap water, and a holding pond for golf-course irrigation water. Water samples within the coastal park were brackish, ranging in salinity from 15 to 67 percent seawater. Samples were analyzed for dissolved inorganic nutrients (nitrogen and phosphorus), stable isotopes (nitrogen and oxygen in dissolved nitrate; hydrogen and oxygen in the water molecule), pharmaceuticals, wastewater compounds, and volatile organic compounds. A case of acute, but temporary, fertilizer contamination was evident along the Park's north boundary during the turf grow-in period of a newly constructed golf course. A maximum nitrogen concentration 280 percent above background level was measured in monitoring well MW401 in July, later falling to 109 percent above background by December. Two nearby sites (MW400 and AP 144) had nitrogen concentrations that were elevated compared to remaining sites but less severely than at MW401. Aside from this localized fertilizer influence, other water samples had lower nutrient enrichments: 40 percent or less above background for nitrogen and 57 percent or less above background for phosphorus. Background was defined in this study by a graphical mixing line between saltwater from a deep well in the Park and freshwater at a reference well in the mountainous uplands (Honokōhau production well, at 1,675 ft altitude). Potential nutrient sources between the uplands and coastal lowlands that could contribute to enrichment include rock weathering, natural vegetation, fertilizers, septic leachate, and atmospheric deposition – including motor-vehicle exhaust. Some fraction of septic leachate is expected in groundwater because there are unsewered suburban and commercial developments upslope from the Park that rely on cesspools and septic systems. However, stable isotopes of nitrate did not implicate septic-waste nitrogen (heavy δ 15 N values on the order of +10 per mil or greater). Instead, the heaviest δ 15 N values of +6 to +8 per mil were associated with the large fishponds, likely as a result of biotic cycling. Water samples with δ 15 N values of +3 to +5 per mil were still isotopically heavier than the upland groundwater value of +2 per mil and likely reflect addition of heavier nitrogen, possibly from septic sources, nitrogen-fixing vegetation, or vehicular exhaust. Pharmaceuticals, wastewater compounds, and volatile organic compounds indicated that if contamination is present, it appears to be at low, barely detectable, levels--at least as reflected by the results of this study. The most diagnostic indication of septic contamination was at monitoring well KAHO 2, closest to Kaloko Light Industrial Park, where three pharmaceuticals (carbamazepine, sulfamethoxazole, and thiobendazole) were detected at trace-level parts-per-trillion concentrations. A screening-level test for laundry fabric brighteners indicated positive detection at most sites; however, readings were quite low and if laundry graywater is present, it appears to be a small, dilute fraction. Because the weather was persistently dry throughout the study period, the USGS team was unable to conduct a wet-weather “storm” sampling. Wet-weather results are expected to differ from those reported here, though by how much remains unknown.

Hawai‘i↗

Mantle helium in the groundwater of the Mirror Lake Basin, New Hampshire, USA, 1994

Helium isotope analyses of ground waters from the Mirror Lake drainage basin in central New Hampshire (USA) show helium in excess of air-saturated water by up to 200x. The freon ages of these waters are younger than 50 years, consistent with the local hydrology. This excess helium has an isotope ratio of ^3He/^4He = 1.65 ± 0.10 x 10^(-6). It is shown that this component cannot be the result of cosmogenic production or mixing with young water containing ^3He from the decay of (bomb) tritium. Measurements of the helium isotope ratio of local rocks indicate that they cannot be the source of this excess component. This strongly suggests that the excess helium component is the result of the addition of some external source of mantle helium. The generally accepted view suggests that mantle helium in continental environments is the result of active volcanism and extensional tectonics. The latest episodes of volcanism in this region of New England are related to the New England hot spot track (95-190 Myr) and the closure of the Iapetus (> 300 Myr). Thus, either the timescale for helium transport through the crust is of the order of 100's of Myr or the signature of mantle helium can be preserved in (e.g.) fluid inclusions for significant periods of time.

Book chapter↗

Field-trip guide to Mount Hood, Oregon, highlighting eruptive history and hazards

This guidebook describes stops of interest for a geological field trip around Mount Hood volcano. It was developed for the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon. The intent of this guidebook and accompanying contributions is to provide an overview of Mount Hood, including its chief geologic processes, magmatic system, eruptive history, local tectonics, and hazards, by visiting a variety of readily accessible localities. We also describe coeval, largely monogenetic, volcanoes in the region. Accompanying the field-trip guidebook are separately authored contributions that discuss in detail the Mount Hood magmatic system and its products and behavior (Kent and Koleszar, this volume); Mount Hood earthquakes and their relation to regional tectonics and the volcanic system (Thelen and Moran, this volume); and young surface faults cutting the broader Mount Hood area whose extent has come to light after acquisition of regional light detection and ranging coverage (Madin and others, this volume). The trip makes an approximately 175-mile (280-kilometer) clockwise loop around Mount Hood, starting and ending in Portland. The route heads east on Interstate 84 through the Columbia River Gorge National Scenic Area. The guidebook points out only a few conspicuous features of note in the gorge, but many other guides to the gorge are available. The route continues south on the Mount Hood National Scenic Byway on Oregon Route 35 following Hood River, and returns to Portland on U.S. Highway 26 following Sandy River. The route traverses rocks as old as the early Miocene Eagle Creek Formation and overlying Columbia River Basalt Group of middle Miocene age, but chiefly lava flows and clastic products of arc volcanism of late Miocene to Holocene age.

Oregon↗

Mount St. Augustine volcano fumarole wall rock alteration: Mineralogy, zoning, composition and numerical models of its formation process

Intensely altered wall rock was collected from high-temperature (640 °C) and low-temperature (375 °C) vents at Augustine volcano in July 1989. The high-temperature altered rock exhibits distinct mineral zoning differentiated by color bands. In order of decreasing temperature, the color bands and their mineral assemblages are: (a) white to grey (tridymite-anhydrite); (b) pink to red (tridymite-hematite-Fe hydroxide-molysite (FeCl 3 ) with minor amounts of anhydrite and halite); and (c) dark green to green (anhydrite-halite-sylvite-tridymite with minor amounts of molysite, soda and potash alum, and other sodium and potassium sulfates). The alteration products around the low-temperature vents are dominantly cristobalite and amorphous silica with minor potash and soda alum, aphthitalite, alunogen and anhydrite. Compared to fresh 1986 Augustine lava, the altered rocks exhibit enrichments in silica, base metals, halogens and sulfur and show very strong depletions in Al in all alteration zones and in iron, alkali and alkaline earth elements in some of the alteration zones. To help understand the origins of the mineral assemblages in altered Augustine rocks, we applied the thermochemical modeling program, GASWORKS, in calculations of: (a) reaction of the 1987 and 1989 gases with wall rock at 640 and 375 °C; (b) cooling of the 1987 gas from 870 to 100 °C with and without mineral fractionation; (c) cooling of the 1989 gas from 757 to 100 °C with and without mineral fractionation; and (d) mixing of the 1987 and 1989 gases with air. The 640 °C gas-rock reaction produces an assemblage consisting of silicates (tridymite, albite, diopside, sanidine and andalusite), oxides (magnetite and hercynite) and sulfides (bornite, chalcocite, molybdenite and sphalerite). The 375 °C gas-rock reaction produces dominantly silicates (quartz, albite, andalusite, microcline, cordierite, anorthite and tremolite) and subordinate amounts of sulfides (pyrite, chalcocite and wurtzite), oxides (magnetite), sulfates (anhydrite) and halides (halite). The cooling calculations produce: (a) anhydrite, halite, sylvite; (b) Cu, Mo, Fe and Zn sulfides; (c) Mg fluoride at high temperature (> 370 °C); (d) chlorides, fluorides and sulfates of Mn, Fe, Zn, Cu and Al at intermediate temperature (170–370 °C); and (e) hydrated sulfates, liquid sulfur, crystalline sulfur, hydrated sulfuric acid and water at low temperature (< 170°C). The volcanic gas-air mixing calculation produces major amounts of Na and K sulfates, minor amounts of hematite and trace amounts (< 1%) of anhydrite at log gas/air (Ig/a) ratios > 0.41 (> 628°C). This is followed by precipitation of sulfates of Fe, Cu. Pb. Zn and Al at Ig/a ratios between 0.31 and -0.4 (>628-178°C). At a lg/r ratio of ≤ -0.4 (178°C). anhydrous sulfates are replaced by their hydrated forms and hygroscopic sulfuric acid forms. At these low g/a ratios. hydrated sulfuric acid becomes the dominant phase in the system. Comparison of the thermochemical modeling results with the natural samples suggests that the alteration assemblages include: (1) minerals that precipitate from direct cooling of the volcanic gas; (2) phases that form by volcanic gases mixing with air: and (3) phases that form by volcanic gas-air-rock reaction. A complex interplay of the three processes produces the observed mineral zoning. Another implication of the numerical simulation results is that most of the observed incrustation and sublimate minerals apparently formed below 700°C.

Journal of Volcanology and Geothermal Research↗

Hydrologist postcard

Hydrologists study the properties, distribution, and effects of water on the Earth’s surface, in the soil and underlying rocks, and in the atmosphere. For more information, visit https://www.usajobs.gov .

General Information Product↗

Geologic appraisal of the petroleum potential of offshore southern California; the borderland compared to onshore coastal basins

Offshore southern California is part of a much larger Pacific continental margin, and the two areas have a similar geologic history at least as far back as middle Tertiary time. Assessment of the petroleum potential of the offshore Southern California borderland is accomplished by examining the adjacent highly explored productive coastal basins in the tectonically unstable area west of the San Andreas fault. Known oil and gas accumulations in this region can be characterized as follows: 88 percent comes from the Los Angeles and Ventura basins; 87 percent has been found in late Miocene and younger strata and only 0.2 percent has been found in Eocene strata; 80 percent has been found in thick deposits of deep-water turbidite reservoirs; and 5 percent has been found in fractured Miocene siliceous shale reservoirs. The percentage of siliceous shale reservoirs will increase as a result of recent discoveries in this rock type in the Santa Barbara Channel. Of the 212 known fields only 5 are giants (greater than 500 million barrels), and these fields account for 52 percent of all past production from the region. Most fields are faulted anticlines, and the largest fields have the highest oil recoveries per acre. Geologic knowledge of the offshore is limited by the availability of data. Data have been obtained from geophysical surveys, analyses of bedrock samples from the sea floor, and extrapolations of data from the mainland and offshore islands. Several factors have a negative effect on the assessment of the petroleum potential of the southern California borderland. They are: 1. The Neogene section is relatively thin, and the Paleogene section is thin and has a limited distribution. 2. Over large areas, Miocene sediments apparently rest directly on basement. 3. Along much of the Santa Rosa-Cortes Ridge, sediments are uplifted and truncated, exposing Paleogene rocks. 4. Organic content in Paleogene sediments is believed too low to generate large amounts of petroleum. 5. Source rocks are immature, even in sediments as old as Eocene. 6. Burial and thermal history are insufficient for the generaton of hydrocarbons over much of the borderland area. 7. Documented oil and gas seeps are unknown seaward of the Channel Islands. 8. Limited exploratory drilling nearshore, the best prospective area, has not been favorable. 9. Adequate or thick reservoirs of deep-water turbidire origin are not evident. These negative factors are partly offset by the following positive factors: 1. Miocene sediments are excellent potential source rocks. 2. Asphaltic oil in rocks of Monterey-type lithology may be generated at lower than normal temperatures. 3. Shallow-water sands of reservoir quality possibly are present in the uppermost Paleogene and lowermost Neogene section. 4. Potential structural traps may be analogous to major structural producing trends onshore. 5. Fractured shale reservoirs may be present along flanks of major banks and ridges. 6. Buried and unsampled Paleogene and Late Cretaceous sediments may be better source rocks than those sampled and measured. The southern California borderland, although a part of a locally rich petroliferous region, has no known basins with geologic histories or characteristics similar to the Los Angeles and Ventura basins. Some offshore basins are similar to less endowed basins in terms of petroleum potential such as the Santa Maria and Salinas basins. Areas with the best petroleum potential may be in deep water (greater than 500 m). Some of the past high estimates of the petroleum potential may have been overstated; the existing geologic data tend to substantiate low estimates of 0.6 to 5.8 billion barrels of oil and 0.6 to 5.8 trillion ft3 of gas for the southern California borderland at the 5 and 95 percent probability level.

Circular↗

Coal and peat in the sub-Saharan region of Africa: alternative energy options?

Increased energy demand as a result of growth in population, trends to sedentation and urbanization, and the desire for improvement in living standards, coupled with apparent climatic changes, are reducing fuelwood availability and contributing to deforestation and desertification in the sub‐Saharan countries. In 14 of those countries, the transport, industrial, and electric power generation sectors are all dependent on imported petroleum products for their energy needs with resultant balance of trade and debt‐servicing problems. Coal and peat are essentially unused and in some cases unknown in sub‐Saharan Africa. However, they might comprise valuable alternative energy sources in some or all of the developing nations of the region. The eleven countries considered in this appraisal reportedly contain coal and peat. On the basis of regional geology, another five countries might also contain coal‐bearing rocks. If the resource potential is adequate, coal and peat might be utilized in a variety of ways including substituting for fuelwood, generating electricity, supplying process heat for local industry and increasing agricultural productivity.

Natural Resources Forum↗

Thermal-infrared spectra and chemical analyses of twenty-six igneous rock samples

Emittance spectra in the 7.5 μm to 14 μm wavelength region and chemical compositions of 26 igneous rocks are reported. Experimental measurements on the rocks were made under simulated daytime field conditions. Some surface silicate contaminants, such as clayey silt, significantly altered the spectral emittance of a fresh sample, whereas, for these samples, hydrous and anhydrous ferric oxide weathering products did not mask important silicate spectral information. In the 11.75 μm to 13.75 μm wavelength region, the mean emittance of all the silicate samples was0.956 ± 0.008, except for periodtite, which had an average emittance of 0.895. This region of uniform emittance should be useful in remote sensing experiments for the separation of the effects of temperature and chemical composition on the spectral emittance of silicate rocks.

Remote Sensing of Environment↗

Weathering of sulfidic shale and copper mine waste: Secondary minerals and metal cycling in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA

Metal cycling via physical and chemical weathering of discrete sources (copper mines) and regional (non-point) sources (sulfide-rich shale) is evaluated by examining the mineralogy and chemistry of weathering products in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA. The elements in copper mine waste, secondary minerals, stream sediments, and waters that are most likely to have negative impacts on aquatic ecosystems are aluminum, copper, zinc, and arsenic because these elements locally exceed toxicity guidelines for surface waters or for stream sediments. Acid-mine drainage has not developed in streams draining inactive copper mines. Acid-rock drainage and chemical weathering processes that accompany debris flows or human disturbances of sulfidic rocks are comparable to processes that develop acid-mine drainage elsewhere. Despite the high rainfall in the mountain range, sheltered areas and intermittent dry spells provide local venues for development of secondary weathering products that can impact aquatic ecosystems.

Environmental Geology↗

Inclusions in Mount St. Helens dacite erupted from 1980 through 1983

Inclusions of plutonic, metavolcanic and volcanic rocks are abundant in dacite pumice and lava from the 1980–1986 eruption sequence at Mount St. Helens. Point counts of inclusions exposed in talus blocks from the dome from 1980 through 1983 show that inclusions form approximately 3.5 vol% of the lava. Eighty-five percent of the inclusions are medium-grained gabbros with an average diameter of 6 cm. Additional rock types include quartz diorite, hornfelsic basalt, dacite, andesite and vein quartz. Disaggregated inclusions are common and define shear planes within the dome. These fragmented inclusions may significantly contaminate analyses of the dacite. The gabbroic inclusions are of four distinct types, all with mineral assemblages consistent with crystallization pressures of less than 9 kb. Textures and major-element compositions indicate that most of the gabbroic inclusions are cumulates. The most abundant inclusion type is laminated gabbronorite, which contains up to 9% interstitial glass, derived from partial melting. The presence of quartz veins and hornblende-bearing veins within sheared zones in the laminated gabbronorite indicates that the source of these inclusions was holocrystalline rock that had been penetrated by water-rich fluids. The gabbronorite contained sufficient water to be susceptible to partial melting when the magma that fed the 1980–1986 eruption sequence was emplaced nearby. Various types of gabbroic inclusions, including the laminated gabbronorite, are common in Mount St. Helens lavas of approximately the last 3000 years. This coincides with the interval in which Mount St. Helens first erupted basalt and basaltic andesite lavas. These observations, together with the fact that the gabbroic inclusions are compositionally unlike any of the Tertiary intrusive rocks in the Mount St. Helens area, strongly suggest that the inclusions are related to the introduction of basalt to the Mount St. Helens magmatic system. The source of the gabbros could be a layered mafic pluton formed through crystal accumulation from multiple batches of basaltic magma emplaced at mid-to upper-crustal depths beneath the volcano. The prevalence of explosive eruptions at Mount St. Helens may play a part in bringing the inclusions to the surface. The eruptive products of the cataclysmic eruption of May 18,1980 contain notably fewer inclusions than the pyroclastic flows and dome lavas erupted subsequently. This suggests that the May 18 eruption shattered conduit wall rock that was subsequently stoped into the magma and carried to the surface later in the eruption series.

Washington↗

Vitrinite reflectance analysis

Vitrinite is a maceral group (a set of organic matter types with similar properties and appearance) derived from the remains of woody material from vascular plants and is composed of the thermally evolved products of lignin and cellulose. Vitrinite is the dominant component of humic coal and is found as a minor component dispersed into sedimentary rocks, especially mudrocks, the primary source rocks for petroleum. Vitrinite reflectance analysis is the microscopical determination of the reflectance of incident light from vitrinite as calibrated to standards of known reflectance. The reflectance of vitrinite increases systematically with increasing thermal maturation during burial and heating of sedimentary rocks, and this property allows vitrinite reflectance analysis to be used as a common geothermometer for source rocks in petroliferous basins. Vitrinite reflectance analysis also is used as a method to determine coal rank.

Book chapter↗

The influence of pressure on petroleum generation and maturation as suggested by aqueous pyrolysis

Because fluid pressures are transient in sedimentary basins over geologic time, the effect of increasing fluid pressure on organic-matter metamorphism is difficult to determine, and conflicting opinions exist concerning its influence. Properly-performed aqueous-pyrolysis experiments can closely simulate hydrocarbon generation and maturation in nature, and thus offer an excellent way to study the influence of pressure. Such experiments, carried out on the Retort Phosphatic Shale Member of the Lower Permian Phosphoria Formation (type II-S organic matter) at different constant temperatures, demonstrated that increasing pressure significantly retards all aspects of organic matter metamorphism, including hydrocarbon generation, maturation and thermal destruction. This conclusion results from detailed quantitative and qualitative analyses of all products from hydrocarbon generation, from the C 1 to C 4 hydrocarbon gases to the asphaltenes, and also from analyses of the reacted rocks. We have documented that our aqueous-pyrolysis experiments closely simulated natural hydrocarbon generation and maturation. Thus the data taken as a function of pressure have relevance to the influence of normal and abnormal fluid pressures as related to: 1) depths and temperatures of mainstage hydrocarbon generation; 2) the thermal destruction of deposits of gas or light oil, or their preservation to unexpectedly high maturation ranks; and 3) the persistence of measurable to moderate concentrations of C 15 + hydrocarbons in fine-grained rocks even to ultra-high maturation ranks.

Organic Geochemistry↗

BET surface area distributions in polar stream sediments: Implications for silicate weathering in a cold-arid environment

BET surface area values are critical for quantifying the amount of potentially reactive sediments available for chemical weathering and ultimately, prediction of silicate weathering fluxes. BET surface area values of fine-grained (<62.5 &mu;m) sediment from the hyporheic zone of polar glacial streams in the McMurdo Dry Valleys, Antarctica (Wright and Taylor Valleys) exhibit a wide range (2.5&ndash;70.6 m 2 /g) of surface area values. Samples from one (Delta Stream, Taylor Valley) of the four sampled stream transects exhibit high values (up to 70.6 m 2 /g), which greatly exceed surface area values from three temperate proglacial streams (0.3&ndash;12.1 m 2 /g). Only Clark stream in Wright Valley exhibits a robust trend with distance, wherein surface area systematically decreases (and particle size increases) in the mud fraction downstream, interpreted to reflect rapid dissolution processes in the weathering environment. The remaining transects exhibit a range in variability in surface area distributions along the length of the channel, likely related to variations in eolian input to exposed channel beds, adjacent snow drifts, and to glacier surfaces, where dust is trapped and subsequently liberated during summer melting. Additionally, variations in stream discharge rate, which mobilizes sediment in pulses and influences water:rock ratios, the origin and nature of the underlying drift material, and the contribution of organic acids may play significant roles in the production and mobilization of high-surface area sediment. This study highlights the presence of sediments with high surface area in cold-based glacier systems, which influences models of chemical denudation rates and the impact of glacial systems on the global carbon cycle.

Applied Geochemistry↗

The sources of our iron ores. II

In this instalment** the iron ore deposits of the Lake Superior States, which normally furnish about 80 per cent, of the annual output of the United States, are described together with historical notes on discovery and transportation of ore. Deposits in the Mississippi Valley and Western States are likewise outlined and the sources of imported ore are given. Reviewing the whole field, it is indicated that the great producing deposits of the Lake Superior and southern Appalachian regions are of hematite in basin areas of sedimentary rocks, that hydrated iron oxides and iron carbonates are generally found in undisturbed comparatively recent sediments, and that magnetite occurs in metamorphic and igneous rocks; also that numerical abundance of deposits is not a criterion as to their real importance as a source of supply. Statistics of production of iron ore and estimates of reserves of present grade conclude the paper.

Journal of Chemical Education↗

U-Pb Zircon ages from bedrock samples collected in the Tanacross D-1, and parts of the D-2, C-1, and C-2 quadrangles, Alaska

This Alaska Division of Geological & Geophysical Surveys (DGGS) Preliminary Interpretive Report presents U-Pb ages of zircons from 14 sedimentary, metamorphic, and igneous samples collected during 2017 and 2018 field investigations in the northeastern Tanacross Quadrangle, Alaska. The DGGS Northeast Tanacross project is a part of multi-year effort to investigate the geology and mineral-resource potential of the Yukon-Tanana Uplands region in collaboration with the U.S. Geological Survey. The purpose of the U-Pb isotopic study is to better understand the Devonian-to-Mississippian and Mesozoic-to-Early Paleogene episodes of magmatic and tectonic events within the Yukon-Tanana Uplands and the relationship of magmatism to the metallic mineral deposits. This area is characterized by the presence of two Late Devonian to Mississippian metamorphic assemblages-Lake George and Fortymile River (Dusel-Bacon and others, 2006; Foster, 1970). Both assemblages are composed of metasedimentary and metavolcanic rocks that have been intruded by Devonian to Eocene intrusive rocks of varying composition and texture. Paleozoic intrusive rocks are deformed and metamorphosed and include prevalent Late Devonian-Early Mississippian augen orthogneiss, herein called the Divide Mountain suite, that was emplaced into and deformed together with the Lake George assemblage (Aleinikoff and others, 1986). The Fortymile River assemblage is primarily cross-cut by Mississippian to Permian intrusive rocks that are also pervasively deformed and metamorphosed. Following Jurassic to mid-Cretaceous regional metamorphism and deformation, all metamorphic rock packages were intruded by Mid- to Late-Cretaceous volcanic and plutonic rocks (Naibert and others, 2018), some of which have known or suspected potential for gold together with silver, zinc, copper, and lead mineralization. Products included in this data release are: A summary of sample-collection methods, the laboratory report, analytical data tables, and associated metadata. All components of this data release are available on the DGGS website http://doi.org/10.14509/30465 .

Alaska↗