SEARCH · Geology Reports

Results for “Ring”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS1985

The effects of heptachlor and lindane on birds, Columbia Basin, Oregon and Washington, 1976-1981

The effects of heptachlor seed treatments on birds in the vicinity of the Umatilla National Wildlife Refuge, Oregon and Washington, were investigated from 1978 to 1981. An egg was collected from each of 60 nests representing six species. Heptachlor epoxide (HE) residues were detected in 35 eggs and were particularly high (8–13 μg g −1 ) in a few eggs of the black-billed magpie, mallard, and ring-necked pheasant. These residues were within the range that induced reproductive problems in other species in the area. Diagnostically lethal residue levels (⩾ 9 μg g −1 ) of HE were detected in the brains of nine birds (four species). Most of the avifauna in the area contained residues of HE and related compounds. Lindane, the replacement chemical for heptachlor, did not produce adverse effects in birds, and residues were not detected in either their eggs or brains.

Science of the Total Environment↗

USGS1987

Presence and potential significance of aromatic-ketone groups in aquatic humic substances

Aquatic humic- and fulvic-acid standards of the International Humic Substances Society were characterized, with emphasis on carbonyl-group nature and content, by carbon-13 nuclear-magnetic-resonance spectroscopy, proton nuclear-magnetic-resonance spectroscopy, and infrared spectroscopy. After comparing spectral results of underivatized humic and fulvic acids with spectral results of chemically modified derivatives, that allow improved observation of the carbonyl group, the data clearly indicated that aromatic ketone groups comprised the majority of the carbonyl-group content. About one ketone group per monocyclic aromatic ring was determined for both humic and fulvic acids. Aromatic-ketone groups were hypothesized to form by photolytic rearrangements and oxidation of phenolic ester and hydrocarbon precursors; these groups have potential significance regarding haloform formation in water, reactivity resulting from active hydrogen of the methyl and methylene adjacent to the ketone groups, and formation of hemiketal and lactol structures. Aromatic-ketone groups also may be the point of attachment between aliphatic and aromatic moieties of aquatic humic-substance structure.

Georgia↗

USGS1984

Toxicity of anticholinesterase insecticides to birds: Technical grade versus granular formulations

The acute toxicities of 13 granular anticholinesterase insecticides were compared with their technical grade active ingredients by administering single oral doses of chemical to adult Northern bobwhites (Colinus virginianus) and evaluating resultant LD50 values and dose-response curves. Similar tests with ringed turtledoves (Streptopelia risoria) were conducted with five of the granular formulations to check for interspecific differences. The test chemicals were Amaze 15G (isofenphos), Counter 15G (terbufos), Dasanit 15G (fensulfothion), Diazinon 14G (diazinon), Di-Syston 15G (disulfoton), Dyfonate 20G (fonofos), Furadan 10G (carbofuran), Lorsban 15G (chlorpyrifos), Nemacur 15G (fenamiphos), Parathion 10G (parathion), Tattoo 10G (bendiocarb), Temik 15G (aldicarb), and Thimet 15G (phorate). Information is also presented on dose-response relations and their use in hazard assessment, granule size and hazard, response patterns, and toxic signs. The general conclusions were: (1) The organophosphates (fenamiphos and fensulfothion) and the carbamate (aldicarb) were the most toxic of the insecticides tested. (2) The granular formulation and its technical grade active ingredient were of equivalent toxicity, or the granular was significantly less toxic. (3) The dose-response curve enhances hazard assessment. (4) Ingestion of a single granule of Temik 15G was shown to be life threatening to bobwhite-sized birds, and ingestion of fewer than five granules could be lethal to sparrow-sized birds for Dasanit 15G, Diazinon 14G, Dyfonate 20G, Furadan 15G, and Nemacur 15G. (5) It is therefore suggested that the hazard associated with granular insecticides may be more dependent on which species (cf. size and feeding behavior) inhabit a treated area than on the actual application rate.

Ecotoxicology and Environmental Safety↗

USGS1991

Bank accretion and the development of vegetated depositional surfaces along modified alluvial channels

This paper describes the recovery of stable bank form and development of vegetated depositional surfaces along the banks of channelized West Tennessee streams. Most perennial streams in West Tennessee were straightened and dredged since the turn of the century. Patterns of fluvial ecological responses to channelization have previously been described by a six-stage model. Dendrogeomorphic (tree-ring) techniques allowed the determination of location, timing, amount, and rate of bank-sediment deposition. Channel cross sections and ecological analyses made at 101 locations along 12 streams, encompassing bends and straight reaches, show that channel and bank processes initially react vertically to channelization through downcutting. A depositional surface forms on banks once bed-degradation and heightened bank mass wasting processes have eased or slowed. The formation of this depositional surface marks the beginning of bank recovery from channelization. Dominating lateral processes, characteristic of stable or natural channels, return during the formation and expansion of the depositional surface, suggesting a relation with thalweg deflection, point-bar development, and meanderloop extension. Characteristic woody riparian vegetation begins to grow as this depositional surface develops and becomes part of the process and form of restabilizing banks. The depositional surface initially forms low on the bank and tends to maintain a slope of about 24°. Mean accretion rates ranges from 5.9 cm/yr on inside bends to 0 cm/yr on most outside bends; straight reaches have a mean-accretion rate of 4.2 cm/yr. The relatively stable, convex upward, depositional surface expands and ultimately attaches to the flood plain. The time required for the recovery process to reach equilibrium averaged about 50 years. Indicative pioneer speccies of woody riparian vegetation include black willow, river birch, silver maple, and boxelder. Stem densities generally decrease with time after and initial flush of about 160 stems per 100 m 2 . Together bank accretion and vegetative regrowth appear to be the most important environmental processes involved in channel bank recovery from channelization or rejuvenation.

Geomorphology↗

USGS1994

Flood geomorphology of Arthurs Rock Gulch, Colorado: paleoflood history

Episodic late Quaternary flooding is recorded by bouldery deposits and slackwater sediments along Arthurs Rock Gulch, an ephemeral stream west of Fort Collins, Colorado. Flood deposits consist of individual granodiorite and pegmatite boulders, boulder bars, and coarse overbank sediment that rest on erosional terrace segments along the channel. We identified evidence for at least five flood in the lower two thirds of the 1.84 km 2 drainage basin. Flood deposits are differentiated by their position above the active channel, weathering characteristics, degree of boulder burial by colluvium, amount of lichen cover, and position with respect to terrace and colluvial deposits. Age estimates for the flood deposits are based on radiocarbon dating, tree-ring analyses, and relative-age criteria from four sites in the basin. At least two floods occurred in the last 300 years; a third flood is at least 5000 years old, but likely younger than 10,000 yr BP; and the two oldest floods occurred at least 40,000 years BP.

Geomorphology↗

USGS1983

The compositionally zoned eruption of 1912 in the Valley of Ten Thousand Smokes, Katmai National Park, Alaska

On June 6–8, 1912, ∼ 15 km 3 of magma erupted from the Novarupta caldera at the head of the Valley of Ten Thousand Smokes (VTTS), producing ∼ 20 km 3 of air-fall tephra and 11–15 km 3 of ash-flow tuff within ∼ 60 hours. Three discrete periods of ash-fall at Kodiak correlate, respectively, with Plinian tephra layers designated A, CD, and FG by Curtis (1968) in the VTTS. The ash-flow sequence overlapped with but outlasted pumice fall A, terminating within 20 hours of the initial outbreak and prior to pumice fall C. Layers E and H consist mostly of vitric dust that settled during lulls, and Layer B is the feather edge of the ash flow. The fall units filled and obscured the caldera, but arcuate and radial fissures outline a 6-km 2 depression. The Novarupta lava dome and its ejecta ring were emplaced later within the depression. At Mt. Katmai, 10 km east of the 1912 vent, a 600-m-deep caldera of similar area also collapsed at about this time, probably owing to hydraulic connection with the venting magma system; but all known ejecta are thought to have erupted at Novarupta. Mingling of three distinctive magmas during the eruption produced an abundance of banded pumice, and mechanical mixing of chilled ejecta resulted in deposits with a wide range of bulk composition. Pumice in the initial fall unit (A) is 100% rhyolite, but fall units atop the ash flow are > 98% dacite; black andesitic scoria is common only in the ash flows and in near-vent air-fall tephra. Pumice counts show the first half of the ash-flow deposit to be 91–98% rhyolite, but progressive increases of dacite and andesite eventually reduced the rhyolitic component to < 2%. The later, rhyolite-poor flows were hotter, less mobile, and widely produced partially welded tuff and vapor-indurated sillar. The main ash flow was too deflated and sluggish 16 km from the vent to surmount a 25-m-high moraine in its path but was diverted around it and continued 5 km down-valley, engulfing and charring trees but not toppling all of them. Thin ash-flow veneers feather 30–40 m up the enclosing valley walls but only where a constriction in the central VTTS locally raised the flow level. In the upper VTTS, the “high sand mark” is not a veneer but a marginal bench formed in thick tuff by differential compaction. Flooding from adjacent glaciers led to phreatic explosions that ejected blocks of tuff more welded than any yet exposed. A cluster of phreatic craters dammed a lake atop the tuff, the breaching of which caused a flood that scoured the ash-flow surface in the central VTTS, transported 50-cm blocks of welded tuff > 20 km to the lowermost VTTS, and deposited 1–8 m of debris there. Rhyolitic ejecta contain only 1–2% phenocrysts but andesite and dacite have 30–45%. Quartz is present and augite absent only in the rhyolite, but all ejecta contain plagioclase, orthopyroxene, titanomagnetite, ilmenite, apatite, and pyrrhotite; rare olivine occurs in the andesite. The zoning ranges of phenocrysts in the rhyolitic and intermediate ejecta do not overlap. New chemical data show the bulk SiO 2 range to be: rhyolite 77 ± 0.6, dacite 66-64.5, and andesite 61.5–58.5%. The dacitic and andesitic ejecta contrast in color and density, and it is not certain whether they form a compositional continuum. Analyses reported by Fenner within the 66–76% SiO 2 range were of banded pumice and lava and of bulk tephra that mechanically fractionated and mixed during flight. Despite the gap of 10% SiO 2 , Fe-Ti-oxide temperatures show a continuous range from rhyolite (805–850°C) through dacite (855–955°C) to andesite (955–990°C). Thermal continuity and isotopic and trace-element data suggest that all were derived from a single magmatic system, whether or not they were physically contiguous before eruption. If the rhyolitic liquid separated from dacitic magma, extraction was so efficient that no dacitic phenocrysts were retained and no bulk compositions in the range 66–76% SiO 2 were created; if it were a partial melt of roof rocks atop an intermediate magma body, then such rocks had no O- or Sr-isotopic contrast with the andesite-dacite magma and clearly did not include the Jurassic arkosic or granitic basement. The presence of Holocene domes of pre-1912 glassy dacite adjacent to the 1912 vent suggest that the 7 km 3 (or more) of high-silica rhyolitic magma (a composition rare in the Aleutian arc) was generated in less than a few thousand years. The 1912 vent is semi-encircled by several andesitic stratocones and is as close to Mageik, Trident, and Griggs volcanoes as it is to Mt. Katmai. The erupted magma probably occupied only shallow levels of an extensive system of injection and storage under a cluster of several stratovolcanoes. Although Quaternary basalt is not known to have erupted here, the intrusion of basaltic magma probably sustains the greater-VTTS magmatic system.

Alaska↗

USGS1995

Comparison of hydrothermal alteration of carboniferous carbonate and siliclastic rocks in the Valles caldera with outcrops from the Socorro caldera, New Mexico

Continental Scientific Drilling Program (CSDP) drill hole VC-2B [total depth 1761.7 m (5780 ft); maximum temperature 295 °C] was continuously cored through the Sulphur Springs hydrothermal system in the western ring-fracture zone of the 1.14 Ma Valles caldera. Among other units, the hole penetrated 760.2 m (2494.1 ft) of Paleozoic carbonate and siliciclastic strata underlying caldera fill and precaldera volcanic and epiclastic rocks. Comparison of the VC-2B Paleozoic rocks with corresponding lithologies within and around the 32.1 Ma Socorro caldera, 192 km ( 119 miles) to the south-southwest, provides insight into the variability of alteration responses to similar caldera-related hydrothermal regimes. The Pennsylvanian Madera Limestone and Sandia Formation from VC-2B preserve many of the sedimentological and diagenetic features observed in these units on a regional basis and where unaffected by high temperatures or hydrothermal activity. Micrites in these formations in VC-2B are generally altered and mineralized only where fractured or brecciated, that is, where hydrothermal solutions could invade carbonate rocks which were otherwise essentially impermeable. Alteration intensity (and correspondingly inferred paleopermeability) is only slightly higher in carbonate packstones and grainstones, low to intermediate in siltstones and claystones, and high in poorly cemented sandstones. Hydrothermal fracture-filling phases in these rocks comprise sericite (and phengite), chlorite, allanite, apatite, an unidentified zeolite and sphene in various combinations, locally with sphalerite, galena, pyrite and chalcopyrite. Terrigenous feldspars and clays are commonly altered to chlorite and seriate, and euhedral anhydrite “porphyroblasts” with minor chlorite occur in Sandia Formation siltstone. Fossils are typically unaltered, but the walls of some colonial bryozoans in the Madera Limestone are altered to the assemblage chlorite-sericite-epidote-allanite. La, Ce and Nd are present in an unidentified hydrothermal mineral occurring throughout much of the VC-2B Pennsylvanian sequence. Carboniferous carbonate and siliciclastic formations within and around the Socorro caldera show a similar style of alteration and mineralization to their Valles caldera counterparts, but by contrast locally host commercial, caldera-related, base-metal sulfide deposits. As in the Valles rocks, mineralization and alteration in those of the Socorro caldera were strongly controlled by porosity. Unless disrupted by fractures, breccias, or karst cavities ( not identified in Valles caldera drill holes), the rocks remained relatively unaltered. Where these features allowed ingress of mineralizing hydrothermal solutions, base-metal sulfides and rare-earth-element-bearing minerals were precipitated.

New Mexico↗

USGS1994

Geochemical soil sampling for deeply-buried mineralized breccia pipes, northwestern Arizona

Thousands of solution-collapse breccia pipes crop out in the canyons and on the plateaus of northwestern Arizona; some host high-grade uranium deposits. The mineralized pipes are enriched in Ag, As, Ba, Co, Cu, Mo, Ni, Pb, Sb, Se, V and Zn. These breccia pipes formed as sedimentary strata collapsed into solution caverns within the underlying Mississippian Redwall Limestone. A typical pipe is approximately 100 m (300 ft) in diameter and extends upward from the Redwall Limestone as much as 1000 m (3000 ft). Unmineralized gypsum and limestone collapses rooted in the Lower Permian Kaibab Limestone or Toroweap Formation also occur throughout this area. Hence, development of geochemical tools that can distinguish these unmineralized collapse structures, as well as unmineralized breccia pipes, from mineralized breccia pipes could significantly reduce drilling costs for these orebodies commonly buried 300–360 m (1000–1200 ft) below the plateau surface. Design and interpretation of soil sampling surveys over breccia pipes are plagued with several complications. (1) The plateau-capping Kaibab Limestone and Moenkopi Formation are made up of diverse lithologies. Thus, because different breccia pipes are capped by different lithologies, each pipe needs to be treated as a separate geochemical survey with its own background samples. (2) Ascertaining true background is difficult because of uncertainties in locations of poorly-exposed collapse cones and ring fracture zones that surround the pipes. Soil geochemical surveys were completed on 50 collapse structures, three of which are known mineralized breccia pipes. Each collapse structure was treated as an independent geochemical survey. Geochemical data from each collapse feature were plotted on single-element geochemical maps and processed by multivariate factor analysis. To contrast the results between geochemical surveys (collapse structures), a means of quantifying the anomalousness of elements at each site was developed. This degree of anomalousness, named the “correlation value”, was used to rank collapse features by their potential to overlie a deeply-buried mineralized breccia pipe. Soil geochemical results from the three mineralized breccia pipes (the only three of the 50 that had previously been drilled) show that: (1) Soils above the SBF pipe contain significant enrichment of Ag, Al, As, Ba, Ga, K, La, Mo, Nd, Ni, Pb, Sc, Th, U and Zn, and depletion in Ca, Mg and Sr, in contrast to soils outside the topographic and structural rim; (2) Soils over the inner treeless zone of the Canyon pipe show Mo and Pb enrichment anf As and Ga depletion, in contrast to soils from the surrounding forest; and (3) The soil survey of the Mohawk Canyon pipe was a failure because of the rocky terrane and lack of a B soil horizon, or because the pipe plunges. At least 11 of the 47 other collapse structures studied contain anomalous soil enrichments similar to the SBF uranium ore-bearing pipe, and thus have good potential as exploration targets for uranium. One of these 11, #1102, does contain surface mineralized rock. These surveys suggest that soil geochemical sampling is a useful tool for the recognition of many collapse structures with underlying ore-bearing breccia pipes.

Arizona↗

USGS2014

Depletion of eugenol residues from the skin-on fillet tissue of rainbow trout exposed to 14C-labeled eugenol

The U.S. is lagging in access to an approved immediate-release sedative, i.e. a compound that can be safely and effectively used to sedate fish and has no withdrawal period. AQUI-S® 20E (10% active ingredient, eugenol) is under investigation as an immediate-release sedative for freshwater finfish. Because of its investigational status, data are needed to characterize the depletion, distribution, and identity of AQUI-S® 20E residues in fillet tissue. Rainbow trout ( Oncorhynchus mykiss ) were exposed to uniformly ring labeled 14 C-eugenol at a nominal concentration of 10 mg/L for 60 min in 18 °C water. Fish (n = 6) were sampled immediately after the exposure (0 min) then at 30, 60, 120, and 240 min. Eugenol concentrations and characterization of 14 C residues in the fillet tissue were determined by high pressure liquid chromatography and flow-through liquid scintillation counting techniques. Total 14 C-residue burdens in fillet tissue were determined by tissue oxidation and static liquid scintillation counting techniques. Maximum eugenol and 14 C-eugenol equivalent residue concentrations in the fillet tissue were measured immediately after the exposure (44.5 and 38.8 μg/g, respectively). Eugenol was the primary 14 C-residue (> 90% of all 14 C-residues) in extracts from fillet tissue taken from fish sampled immediately after the exposure (0 min) and from fish sampled at 30 and 60 min after the exposure. The depletion of 14 C-eugenol residues from the fillet tissue was rapid (t 1/2 = 26.25 min) after transferring the exposed fish to fresh flowing water.

Aquaculture↗

USGS2016

Chemical abrasion-SIMS (CA-SIMS) U-Pb dating of zircon from the late Eocene Caetano caldera, Nevada

Zircon geochronology is a critical tool for establishing geologic ages and time scales of processes in the Earth's crust. However, for zircons compromised by open system behavior, achieving robust dates can be difficult. Chemical abrasion (CA) is a routine step prior to thermal ionization mass spectrometry (TIMS) dating of zircon to remove radiation-damaged parts of grains that may have experienced open system behavior and loss of radiogenic Pb. While this technique has been shown to improve the accuracy and precision of TIMS dating, its application to high-spatial resolution dating methods, such as secondary ion mass spectrometry (SIMS), is relatively uncommon. In our efforts to U-Pb date zircons from the late Eocene Caetano caldera by SIMS (SHRIMP-RG: sensitive high resolution ion microprobe, reverse geometry), some grains yielded anomalously young U-Pb ages that implicated Pb-loss and motivated us to investigate with a comparative CA and non-CA dating study. We present CA and non-CA 206 Pb/ 238 U ages and trace elements determined by SHRIMP-RG for zircons from three Caetano samples (Caetano Tuff, Redrock Canyon porphyry, and a silicic ring-fracture intrusion) and for R33 and TEMORA-2 reference zircons. We find that non-CA Caetano zircons have weighted mean or bimodal U-Pb ages that are 2–4% younger than CA zircons for the same samples. CA Caetano zircons have mean U-Pb ages that are 0.4–0.6 Myr older than the 40 Ar/ 39 Ar sanidine eruption age (34.00 ± 0.03 Ma; error-weighted mean, 2σ), whereas non-CA zircons have ages that are 0.7–1.3 Myr younger. U-Pb ages do not correlate with U (~ 100–800 ppm), Th (~ 50–300 ppm) or any other measured zircon trace elements (Y, Hf, REE), and CA and non-CA Caetano zircons define identical trace element ranges. No statistically significant difference in U-Pb age is observed for CA versus non-CA R33 or TEMORA-2 zircons. Optical profiler measurements of ion microprobe pits demonstrate consistent depths of ~ 1.6 μm for CA and non-CA Caetano, R33 and TEMORA-2 zircons, and do not indicate variations in secondary ion sputtering rates due to chemical or structural changes from the CA treatment. Our new data underscore the potential for cryptic Pb-loss to go unrecognized in other geologically young magmatic centers that do not have zircons with high U, statistically discordant isotope ratios, high common Pb, or metamict textures.

Nevada↗

USGS2013

Polybrominated diphenyl ether metabolism in field collected fish from the Gila River, Arizona, USA-Levels, possible sources, and patterns

Polybrominated diphenyl ethers (PBDEs) were determined in fish collected from the Gila River, Arizona, a tributary of the Colorado River in the lower part of the Colorado River Basin. Fish samples were collected at sites on the Gila River downstream from Hayden, Phoenix, and Arlington, Arizona in late summer 2003. The Gila River is ephemeral upstream of the Phoenix urban area due to dams and irrigation projects and has limited perennial flow downstream of Phoenix due to wastewater and irrigation return flows. Fifty PBDE congeners were analyzed by high resolution gas chromatography/high resolution mass spectrometry using labeled surrogate standards in composite samples of male and female common carp ( Cyrpinus carpio ), largemouth bass ( Micropterus salmoides ) and channel catfish ( Ictalurus punctatus ). The predominant PBDE congeners detected and quantified were 47, 100, 153, 49, 28, and 17. Concentrations of total PBDEs in these fish ranged from 1.4 to 12700 ng g -1 wet weight, which are some of the highest concentrations reported in fish from the United States. Differences in metabolism of several PBDE congeners by carp is clear at the Phoenix site; congeners with at least one ring of 2,4,5-substitution are preferentially metabolized as are congeners with 2,3,4-substitution.

Arizona↗

USGS2011

Chemical structures of coal lithotypes before and after CO2 adsorption as investigated by advanced solid-state 13C nuclear magnetic resonance spectroscopy

Four lithotypes (vitrain, bright clarain, clarain, and fusain) of a high volatile bituminous Springfield Coal from the Illinois Basin were characterized using advanced solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy. The NMR techniques included quantitative direct polarization/magic angle spinning (DP/MAS), cross polarization/total sideband suppression (CP/TOSS), dipolar dephasing, CH n selection, and recoupled C–H long-range dipolar dephasing techniques. The lithotypes that experienced high-pressure CO 2 adsorption isotherm analysis were also analyzed to determine possible changes in coal structure as a result of CO 2 saturation at high pressure and subsequent evacuation. The main carbon functionalities present in original vitrain, bright clarain, clarain and fusain were aromatic carbons (65.9%–86.1%), nonpolar alkyl groups (9.0%–28.9%), and aromatic C–O carbons (4.1%–9.5%). Among these lithotypes, aromaticity increased in the order of clarain, bright clarain, vitrain, and fusain, whereas the fraction of alkyl carbons decreased in the same order. Fusain was distinct from other three lithotypes in respect to its highest aromatic composition (86.1%) and remarkably small fraction of alkyl carbons (11.0%). The aromatic cluster size in fusain was larger than that in bright clarain. The lithotypes studied responded differently to high pressure CO 2 saturation. After exposure to high pressure CO 2 , vitrain and fusain showed a decrease in aromaticity but an increase in the fraction of alkyl carbons, whereas bright clarain and clarain displayed an increase in aromaticity but a decrease in the fraction of alkyl carbons. Aromatic fused-rings were larger for bright clarain but smaller for fusain in the post-CO 2 adsorption samples compared to the original lithotypes. These observations suggested chemical CO 2 –coal interactions at high pressure and the selectivity of lithotypes in response to CO 2 adsorption.

International Journal of Coal Geology↗

USGS2012

Compression map, functional groups and fossilization: A chemometric approach (Pennsylvanian neuropteroid foliage, Canada)

Nearly all of the spectrochemical studies involving Carboniferous foliage of seed-ferns are based on a limited number of pinnules, mainly compressions. In contrast, in this paper we illustrate working with a larger pinnate segment, i.e., a 22-cm long neuropteroid specimen, compression-preserved with cuticle, the compression map. The objective is to study preservation variability on a larger scale, where observation of transparency/opacity of constituent pinnules is used as a first approximation for assessing the degree of pinnule coalification/fossilization. Spectrochemical methods by Fourier transform infrared spectrometry furnish semi-quantitative data for principal component analysis. The compression map shows a high degree of preservation variability, which ranges from comparatively more coalified pinnules to less coalified pinnules that resemble fossilized-cuticles, noting that the pinnule midveins are preserved more like fossilized-cuticles. A general overall trend of coalified pinnules towards fossilized-cuticles, i.e., variable chemistry, is inferred from the semi-quantitative FTIR data as higher contents of aromatic compounds occur in the visually more opaque upper location of the compression map. The latter also shows a higher condensation of the aromatic nuclei along with some variation in both ring size and degree of aromatic substitution. From principal component analysis we infer correspondence between transparency/opacity observation and chemical information which correlate with varying degree to fossilization/coalification among pinnules.

Nova Scotia↗

USGS2018

A multi-species synthesis of satellite telemetry data in the Pacific Arctic (1987–2015): Overlap of marine mammal distributions and core use areas

We collated available satellite telemetry data for six species of ice-associated marine mammals in the Pacific Arctic: ringed seals ( Pusa hispida ; n = 118), bearded seals( Erignathus barbatus, n = 51), spotted seals ( Phoca largha , n = 72), Pacific walruses ( Odobenus rosmarus divergens, n = 389); bowhead whales ( Balaena mysticetus , n = 46), and five Arctic and sub-arctic stocks of beluga whales ( Delphinapterus leucas , n = 103). We also included one seasonal resident, eastern North Pacific gray whales ( Eschrichtius robustus , n = 12). This review summarized the distribution of daily locations from satellite-linked transmitters during two analysis periods, summer (May–November) and winter (December–April), and then examined the overlap among species. Six multi-species core use areas were identified during the summer period: 1) Chukotka/Bering Strait; 2) Norton Sound; 3) Kotzebue Sound; 4) the northeastern Chukchi Sea; 5) Mackenzie River Delta/Amundsen Gulf; and 6) Viscount Melville Sound. During the winter period, we identified four multi-species core use areas: 1) Anadyr Gulf/Strait; 2) central Bering Sea; 3) Nunivak Island; and 4) Bristol Bay. During the summer period, four of the six areas were centered on the greater Bering Strait region and the northwestern coast of Alaska and included most of the species we examined. The two remaining summer areas were in the western Canadian Arctic and were largely defined by the seasonal presence of Bering-Chukchi-Beaufort stock bowhead whales and Eastern Beaufort Sea stock beluga whales, whose distribution overlapped during both summer and winter periods. During the winter period, the main multi-species core use area was located near the Gulf of Anadyr and extended northwards through Anadyr and Bering Straits. This area is contained within the Bering Sea “green belt”, an area of enhanced primary and secondary productivity in the Bering Sea. We also described available telemetry data and where they can be found as of 2017. These data are important for understanding ice-associated marine mammal movements and habitat use in the Pacific Arctic and should be archived, with appropriate metadata, to ensure they are available for future retrospective analyses.

Deep Sea Research Part II: Topical Studies in Ocea↗

USGS2025

Shear surface undulations modulate clayey gouge strength and contribute to divergent landslide acceleration

Landslides display a spectrum of speeds for incompletely known reasons. Sliding occurs along slickensided undulatory shear surfaces within boundary shear gouge. Laboratory tests reveal that gouge shear strength generally decreases with finite cumulative displacement during relatively rapid failure and may increase or decrease with increasing shear rate; these behaviors can result in accelerating or decelerating landslide motion, which significantly affects consequent hazards. However, mechanisms responsible for such behaviors are poorly understood. We performed advanced ring shear strength testing that revealed such variable strength of a landslide near Oso, Washington, USA. We hypothesized that millimeter-scale undulations along shear surfaces caused the strength variability by imparting shear strength but while also modifying stresses that locally increase and decrease the typically considered particle-scale shear strength. We tested our hypotheses in the laboratory and with finite element soil deformation modeling. Lab results suggest that undulations contribute strength that decays with finite cumulative displacement. Modeling similarly reveals this, and that rapid shearing across undulations locally reduces effective normal stress by persistently elevating pore-water pressure and causing dilation. Consequent effects on strength differ by material with granular-rich, high-friction gouge losing strength and clay-rich, low-friction gouge losing little or gaining strength as shear rates increase. Ample testing by others reveals similar patterns. Hence, the propensity for gouge-controlled accelerating or decelerating failure may be estimated from simple index tests. Our findings on the effects of undulations reveal previously unknown mechanisms that may help to explain why some landslides reactivate catastrophically while others do not.

Washington↗

USGS2007

Empirical evaluation of decision support systems: Needs, definitions, potential methods, and an example pertaining to waterfowl management

Decision support systems are often not empirically evaluated, especially the underlying modelling components. This can be attributed to such systems necessarily being designed to handle complex and poorly structured problems and decision making. Nonetheless, evaluation is critical and should be focused on empirical testing whenever possible. Verification and validation, in combination, comprise such evaluation. Verification is ensuring that the system is internally complete, coherent, and logical from a modelling and programming perspective. Validation is examining whether the system is realistic and useful to the user or decision maker, and should answer the question: “Was the system successful at addressing its intended purpose?” A rich literature exists on verification and validation of expert systems and other artificial intelligence methods; however, no single evaluation methodology has emerged as preeminent. At least five approaches to validation are feasible. First, under some conditions, decision support system performance can be tested against a preselected gold standard. Second, real-time and historic data sets can be used for comparison with simulated output. Third, panels of experts can be judiciously used, but often are not an option in some ecological domains. Fourth, sensitivity analysis of system outputs in relation to inputs can be informative. Fifth, when validation of a complete system is impossible, examining major components can be substituted, recognizing the potential pitfalls. I provide an example of evaluation of a decision support system for trumpeter swan ( Cygnus buccinator ) management that I developed using interacting intelligent agents, expert systems, and a queuing system. Predicted swan distributions over a 13-year period were assessed against observed numbers. Population survey numbers and banding (ringing) studies may provide long term data useful in empirical evaluation of decision support.

Environmental Modelling and Software↗

USGS2012

Morphological and chemical evidence of stromatolitic deposits in the 2.75 Ga Carajás banded iron formation, Brazil

We describe evidence of biogenicity in the morphology and carbon content of well-preserved, Neoarchean samples of banded iron formation (BIF) from Carajás, Brazil. Silica-rich BIF layers contain translucent ellipsoidal or trapezoidal structures (∼5–10 μm diameter) composed of silica, hematite, and kerogen, which are arranged in larger ring-like forms (rosettes). Stable carbon isotope analysis yields a δ 13 C value of −24.5‰ indicating that the contained carbon is likely biogenic. Raman and SEM analyses, as well as wavelength-dispersive X-ray elemental maps, show kerogen inside the rosette forms. Within the iron-rich BIF layers, tubular structures (0.5–5 μm) were observed between hematite granules and blades. Kerogen and kaolinite are present in these structures. Both the rosettes and the tubular structures resemble morphologies that are characteristic of some bacterial species. We hypothesize that the Carajás BIFs originated as biomats formed by one or more species that over time produced large stromatolitic structures. The rosettes and the tubular structures, associated with chert-rich and iron-rich BIF layers, respectively, may represent two different species, or perhaps, two phases of a bacterium life cycle. For example, some modern myxobacteria exhibit similar morphologies in their resting and vegetative stages. Fe(III) precipitation may have occurred by contact of Fe(II) with bacterial slime, leading to oxidation by chemical reactions with exposed polysaccharide hydroxyl and carboxyl groups. The Fe(III) would then have been available for use as a source of energy in a dissimilatory iron reduction type of metabolism. Organic carbon input presumably came from primary producers (not necessarily aerobic) within the local water column, perhaps in shallow-water communities. Alternatively, the carbon may have originated by Fischer–Tropsch synthesis at ocean hydrothermal vents. The observed lateral continuity of BIF layers may perhaps be explained by chemical signaling by the bacteria of favorable or unfavorable environmental conditions, leading to nearly synchronous cell morphogenesis from a vegetative to resting phase and vice versa.

Earth and Planetary Science Letters↗

USGS2021

Material failure and caldera collapse: Insights from the 2018 Kilauea eruption

The Failure Forecast Method (FFM) was introduced as an empirical model for forecasting catastrophic material failures related to natural hazards, such as landslides and volcanic eruptions, with mixed success. During the 2018 eruption of Kilauea volcano, Hawaii, the draining of the summit magma reservoir into the Lower East Rift Zone resulted in the formation of a new caldera at the summit. I tested the applicability of the FFM to caldera collapse by analyzing the cyclical earthquake swarms and ground deformation that occurred between 62 sudden major caldera collapse events. The progression of both the cumulative moment release of the cyclical earthquakes and the GNSS displacement show a major change in mid-June. In late May through early June, the progression of the parameters is consistent with strain localization or creep progression related to the development or activation of the ring fault system. From late June until the end of the eruption, parameter progression is roughly steady with initial accelerating increases in cumulative moment and displacement that shift to approximately linear progression. Analysis of repeating earthquake families in the cyclical swarms showed that the behavior of the repeaters was consistent with that of the cyclical swarms as a whole and suggested that each family undergoes its own progression of activation to termination. While the FFM analysis identified the system change in mid-June, it did not demonstrate an ability to forecast collapse events or the end of the eruption.

Hawaii↗