SEARCH · Geology Reports
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This is a supplement to the report, ' Effect of pumpage on ground-water levels as modeled in Laramie County, Wyoming, ' published as U.S. Geological Survey Water-Resources Investigations Open-File Report 80-1104. The computer program and data used to model ground-water conditions in post-Cretaceous rocks in Laramie County are listed. (USGS)
Introduction The geologic map of the Greater Antilles and Virgin Islands is a compilation of information from the literature, integrated to provide a seamless geologic map of the region. This map was prepared to serve as a base map for a mineral resource assessment of the region. Several small-scale regional geologic maps of the region have been prepared in the past. This report supersedes an earlier version of the geologic map of the Greater Antilles and the Virgin Islands that was released as U.S. Geological Survey (USGS) Open-File Report 2019–1036. For this report, the regional geologic overview shown on sheet 1 covers Cuba; the island of Hispaniola, which includes Haiti and Dominican Republic; Jamaica; the Cayman Islands; Puerto Rico; and the U.S. and British Virgin Islands. Sheet 2 shows the geology of Cuba and Cayman Islands, sheet 3 the geology of Jamaica, sheet 4 the geology of Hispaniola, and sheet 5 the geology of Puerto Rico and Virgin Islands. Accompanying the maps are three tables: table 1 lists the map units (in alphabetical order by map-unit label), their ages, and the countries or territories in which they can be found. These are listed in alphabetical order for ease in locating unit names from the symbols on the maps. Table 2 is a list of sources for the geologic map compilation of Puerto Rico. Table 3 shows formations in the Devil’s Race Course Group of Jamaica.
Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File
In March 1982, as part of the mineral resource investigations of the area, the U.S. Geological Survey conducted a reconnaissance geochemical survey of the Chuckwalla Mountains Wilderness Study Area (WSA), Riverside County, California. The survey involved collecting 196 heavy-mineral (panned) concentrates from stream sediment (the basis for these maps and the chief basis for the interpretations), the same number of sieved stream-sediment samples, and 25 samples of fresh, altered, or mineralized rocks. A broad regional geochemical framework for mineral resource evaluation was established by sampling a few miles beyond the boundaries of the WSA to include all of the Chuckwalla and Little Chuckwalla Mountains. These geochemical maps are therefore regional maps but of sufficient detail to allow valid conclusions about geochemical anomalies in the WSA. The geochemical data were evaluated in three phases: (1) determining enrichment above background amounts for ore-forming and pathfinder (ore-associated) elements; (2) determining the dispersion patterns of the anomalous elements; and (3) relating the dispersion patterns to geologic environments favorable to ore deposition. This report discusses and interprets geochemical results as they are seen at the reconnaissance stage. Analytical results for all samples collected are released in a U.S. Geological Survey Open-File Report (Adrian and others, 1985). A statistical summary of the data from heavy-mineral concentrates and sieved stream sediments is shown in table 1. The analytical results for selected elements in rock samples are shown in table 2.
This report summarizes recent results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Cordova and Middleton Island 1°x3° quadrangles of coastal southern Alaska. Published open-file reports and maps accompanied by descriptive and interpretative texts, tables, diagrams, and pertinent references provide background information for a mineral-resource assessment of the two quadrangles. Mines in the Cordova and Middleton Island quadrangles produced copper and byproduct gold and silver in the first three decades of the 20th century. The quadrangles may contain potentially significant undiscovered resources of precious and base metals (gold, silver, copper, zinc, and lead) in veins and massive sulfide deposits hosted by Cretaceous and Paleogene sedimentary and volcanic rocks. Resources of manganese also may be present in the Paleogene rocks; uranium resources may be present in Eocene granitic rocks; and placer gold may be present in beach sands near the mouth of the Copper River, in alluvial sands within the canyons of the Copper River, and in smaller alluvial deposits underlain by rocks of the Valdez Group. Significant coal resources are present in the Bering River area, but difficult access and structural complexities have discouraged development. Investigation of numerous oil and gas seeps near Katalla in the eastern part of the area led to the discovery of a small, shallow field from which oil was produced between 1902 and 1933. The field has been inactive since, and subsequent exploration and drilling onshore near Katalla in the 1960's and offshore near Middleton Island on the outer continental shelf in the 1970's and 1980's was not successful.
The Clear Lake Volcanics are located in the California Coast Ranges about 150 km north of San Francisco. This Quaternary volcanic field has erupted intermittently since 2.1 million years ago. This volcanic field is considered a high-threat volcanic system (Ewert and others, 2005) The adjacent Geysers geothermal field, largest power-producing geothermal field in the world, is powered by the magmatic heat source for the volcanic field. This report consists of three sheets that include the geologic map, one table, two figures, three cross sections, description of map units, charts of standard and diagrammatic correlation of map units, and references. This map supersedes U.S. Geological Survey Open-File Report 76-751. Descriptions of map units are grouped by geographic area. Summaries of the evolution, chemistry, structure, and tectonic setting of the Clear Lake Volcanics are given in Hearn and others (1981) and Donnelly-Nolan and others (1981). The geology of parts of the area underlain by the Cache Formation is based on mapping by Rymer (1981); the geology of parts of the areas underlain by the Sonoma Volcanics, Franciscan assemblage, and Great Valley sequence is based on mapping by McLaughlin (1978). Volcanic compositional map units are basalt, basaltic andesite, andesite, dacite, rhyodacite, and rhyolite, based on SiO2 content. Included in this report are maps showing the distribution of volcanic rocks through time and a chart showing erupted volumes of different lava types through time. A table gives petrographic data for each map unit by mineral type, abundance, and size. Most ages are potassium-argon (K/Ar) ages determined for whole-rock samples and mineral separates by Donnelly-Nolan and others (1981), unless otherwise noted. A few ages are carbon-14 ages or were estimated from geologic relationships. Magnetic polarities are from Mankinen and others (1978; 1981) or were determined in the field by B.C. Hearn, Jr., using a portable fluxgate magnetometer. Thickness for most units is estimated from topographic relief except where drill-hole data were available.
This volume continues the annual series of U.S. Geological Survey (USGS) reports on geologic investigations in Alaska. Since 1975, when the first of these collections of short papers appeared under the title "The United States Geological Survey in Alaska: Accomplishments during 1975," the series has been published as USGS circulars. This bulletin departs from the circular style, in part to provide a more flexible format for longer reports with more depth of content, better documentation, and broader scope than is possible for circular articles. The 13 papers in this bulletin represent a sampling of research activities carried out in Alaska by the USGS over the past few years. The topics addressed range from mineral resource studies (including natural gas) and geochemistry, Quaternary geology, basic stratigraphic and structural problems, and the use of computer graphics in geologic map preparation, to the application of geochronology to regional tectonic problems. Geographic areas represented are numbered on figure 1 and include the North Slope (1) and Brooks Range (2, 3) of Arctic Alaska, Seward Peninsula (4), interior Alaska (5-9), and remote locations of the Alaska Peninsula (10, 11) and southeast Alaska (12, 13). Two bibliographies following the reports of investigations list (1) reports about Alaska in USGS publications released in 1988 and (2) reports about Alaska by USGS authors in publications outside the USGS in 1988. A bibliography and index of the short papers in past USGS circulars devoted to Geological Research and Accomplishments in Alaska (1975-1986) is published as USGS Open-File Report 87-420.
This collection of papers continues the annual series of U.S. Geological Survey (USGS) reports on geologic investigations in Alaska. From 1975 through 1988, the series was published as USGS circulars. The first of these appeared under the title "The United States Geological Survey in Alaska: Accomplishments during 1975," and the series continued to the last annual circular entitled "Geologic studies in Alaska by the U.S. Geological Survey during 1987," which reflects a title change made in 1986. This 1990 volume continues the bulletin format started in 1988. As in 1989, this volume separates shorter contributions as Geologic Notes from more extensive Articles. This 1990 volume of 18 Articles and 4 Geologic Notes represents the broad range of USGS research activities carried out in Alaska over the past few years. These studies include topics on mineral and other resources such as gold (Y eend), platinum-group elements (Cathrall and Antweiler), coal (Roberts, Stricker, and Affolter), and petroleum (Howell, Bird, and others). Many other investigations provide background geochemical (Kilburn, Box, and others) and geologic data needed for resource evaluation as well as for determining the general geologic framework of Alaska, as in stratigraphic, sedimentologic, and paleontologic and radiometric age studies (Blodgett, Clough, and others; Box and Elder; Dickinson and Skipp; Marincovich and Moriya; McLean and Stanley; Stanley, Flores, and Wiley; Roeske, Pavlis, and others); geophysics (Sampson, Labson, and Long); structure and tectonic evaluations (Bradley and Kosky; Clendenen, Sliter, and Byrne; Karl; Csejtey; Howell, Johnsson, and others); and geomorphic and late Quaternary studies (Carter and Hillhouse; Galloway, Huebner, and others; McGimsey, Richter, and others; Nelson and Carter). These studies span nearly the entire State from the North Slope and Brooks Range to interior, southwestern, and south-central Alaska (fig. 1). Two bibliographies (White) at the end of the volume list (1) reports about Alaska in USGS publications released in 1990 and (2) reports about Alaska by USGS authors in publications outside the USGS in 1990. A bibliography and index of papers in past USGS circulars that are devoted to geologic research and accomplishments in Alaska (1975 to 1986) is published as USGS Open-File Report 87-420.
The purpose of this report is to assess the potential for undiscovered vein and replacement deposits of gold, silver, copper, lead, zinc, manganese, and tungsten in the Butte 1° x 2° quadrangle. This quadrangle, in west-central Montana, is one of the most mineralized and productive regions in the United States. Its mining districts, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion. Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were also supported by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in resource assessment include a compilation of all data into data sets, the development of a descriptive model for vein and replacement deposits in the quadrangle, and the analysis of data using techniques provided by the Geographic Information System (GIS). This map is one of a number of reports and maps on the Butte 1 °X2° quadrangle. Other publications resulting from this study include U.S. Geological Survey Miscellaneous Investigations Series Maps 1-2050-A (Rowan and Segal, in press) and I-2050-B (Purdy and Rowan, in press); Miscellaneous Field Studies Map MF-1925 (Wallace, 1987); and Open-File Reports 86-292 (Wallace and others, 1986) and 86--0632 (Elliott and others, 1986). Reports on mineral resource assessment for several other types of deposits in the Butte quadrangle are in preparation.
The purpose of this report is to assess the potential for undiscovered skarn deposits of gold, silver, copper, tungsten, and iron in the Butte 1 °X2° quadrangle. Other deposit types have been assessed and reports for each of the following have been prepared: Vein and replacement deposits of gold, silver, copper, lead, zinc, ·manganese, and tungsten; porphyry-stockwork deposits of copper, molybdenum, and tungsten; stockwork-disseminated deposits of gold and silver; placer deposits of gold; and miscellaneous deposit types including strata-bound deposits of copper and silver in rocks of the Middle Proterozoic Belt Supergroup, phosphate deposits in the Permian Phosporia Formation, and deposits of barite and fluorite. The Butte quadrangle, in west-central Montana, is one of the most mineralized and productive mining regions in the U.S. Its mining districts, including the world famous Butte or Summit Valley district, have produced a variety of metallic and nonmetallic mineral commodities valued at more than $6.4 billion (at the time of production). Because of its importance as a mineral producing region, the Butte quadrangle was selected for study by the U.S. Geological Survey under the Conterminous United States Mineral Assessment Program (CUSMAP). Under this program, new data on geology, geochemistry, geophysics, geochronology, mineral resources, and remote sensing were collected and synthesized. The field and laboratory studies were supported, in part, by funding from the Geologic Framework and Synthesis Program and the Wilderness Program. The methods used in resource assessment include a compilation of all data into data sets, the development of an occurrence model for skarn deposits in the quadrangle, and the analysis of data using techniques provided by a Geographic Information System (GIS). This map is one of a number of reports and maps on the Butte 1 °X2° quadrangle. Other publications resulting from this study include U.S. Geological Survey (USGS) Miscellaneous Investigations Series Maps 1-2050-A (Rowan and Segal, 1989), 1-2050-B (Rowan and others, 1991), 1-2050-D (Elliott and others, in press); Miscellaneous Field Studies Map MF-1925 (Wallace, 1987a); and Open-File Reports OF-86-292 (Wallace and others, 1986) and OF-86-0632 (Elliott and others, 1986).
This study provides brief discussions of the petroleum geology, play descriptions, and resource estimates of 220 individually assessed exploration plays in all 80 onshore geologic provinces within nine assessment regions of the continental United States in 1989; these 80 onshore provinces were assessed in connection with the determination of the Nation's estimated undiscovered resources of oil and gas. The present report covers the 25 provinces that make up Region 1, Alaska, and Region 2, Pacific Coast. It is our intention to issue Region 3, Colorado Plateau and Basin and Range, and Region 4, Rocky Mountains and Northern Great Plains, in book form as well. Regions 5 through 9 (West Texas and Eastern New Mexico, Gulf Coast, Midcontinent, Eastern Interior and Atlantic Coast) will be released individually, as Open-File Reports.
Wind fetch is defined as the unobstructed distance that wind can travel over water in a constant direction. Fetches are limited by landforms surrounding the body of water. Fetch is an important characteristic of open water because longer fetches can result in larger wind-generated waves. The larger waves, in turn, can increase shoreline erosion and sediment resuspension (Rohweder and others 2012). Increases in sediment resuspension lead to increases in water turbidity, which in turn decreases light penetration and, therefore, create conditions less conducive to aquatic plant growth (Giblin and others 2010). A wind fetch model was developed by David Finlayson, U. S. Geological Survey, Pacific Science Center, while he was a Ph.D. student at the University of Washington (Finlayson 2005). This method calculates effective fetch using the recommended procedure of the Shore Protection Manual (USACE 1984). Scientists at the United States Geological Survey, Upper Midwest Environmental Sciences Center (UMESC) and the United States Army Corps of Engineers (USACE) further refined this model (Rohweder and others 2012) and structured it to operate using the most recent version of the ArcMap Geographic Information System platform (Esri, 2019). At the time the analysis was performed, the version of ArcMap used was 10.7.1. The model refined in 2012 was used for the analyses described in this report. Using this model, UMESC performed an analysis to model weighted wind fetch for the Upper Mississippi River System (UMRS) corresponding to three separate time periods of land cover spatial data acquisition (1989, 2000, and 2010/2011). The purpose of the analysis was to examine how fetch varies over time and space within the UMRS for potential management applications. For more detailed information on the wind fetch model, examine the USGS Open-File Report by Rohweder and others (2012).
An aeromagnetic survey of the Seward and northern part of the Blying Sound quadrangles was flown by Geometrics, Inc., during 1975-77 to provide magnetic data to aid in an appraisal of the mineral resources. Background details of the regional geology and major structures are described in a companion report by Tysdal and Case (1979), and interpretation of the gravity data are described in a report by Case and others (1979). Preliminary reports of a paleomagnetic investigation have been reported by Hillhouse and Gromme (1977), and a more complete analysis of the results is in preparation. The aeromagnetic survey was flown at a nominal height of 300 m above the surface and flight lines were spaced about 1.7 km apart. Total magnetic field was measured by a proton-precession magnetometer. The International Geomagnetic Reference Field (IGRF), updated to 1976, was removed, and the residual values were computer-contoured to produce the aeromagnetic map (sheet 1). Detailed aeromagnetic maps at scale 1:63,360 and a map at scale 1:250,000 have been released as Open File Reports 78-1080 through 1083 (U.S. Geological Survey, 1978). Magnetic anomalies in the Seward-Blying Sound region are somewhat less complex than in other parts of south-central Alaska, primarily because of the huge volume of relatively nonmagnetic flysch that constitutes the Valdez and Orca Groups. Several rather isolated groups of mafic-ultramafic rocks are significantly more magnetic than the flysch assemblages, and cause distinctive patterns of magnetic anomalies. A few of the granitic plutons are magnetic, but most appear to have little or no magnetic expression.
In 1976, L.B. Magoon, W.L. Adkinson, and R.M. Egbert published a major geologic map of the Cook Inlet region, which has served well as a compilation of existing information and a guide for future research and mapping. The map in this report updates Magoon and others (1976) and incorporates new and additional mapping and interpretation. This map is also a revision of areas of overlap with the geologic map completed for central Alaska (Wilson and others, 1998). Text from that compilation remains appropriate and is summarized here; many compromises have been made in strongly held beliefs to allow construction of this compilation. Yet our willingness to make interpretations and compromises does not allow resolution of all mapping conflicts. Nonetheless, we hope that geologists who have mapped in this region will recognize that, in incorporating their work, our regional correlations may have required some generalization or lumping of map units. Many sources were used to produce this geologic map and, in most cases, data from available maps were combined, without generalization, and new data were added where available. A preliminary version of this map was published as U.S. Geological Survey Open-File Report 2009–1108. The main differences between the versions concern revised mapping of surfical deposits in the northern and eastern parts of the map area. Minor error corrections have been made also.
All of four national forests, one national grassland, and parts of four additional forests lie within the State of Wyoming. Some of these National Forest System lands have moderate to high potential for undiscovered oil and gas resources. In the 1989 National Assessment of undiscovered oil and gas and in various Open-File Reports, the U.S. Geological Survey described oil and gas plays and presented estimates of recoverable conventional oil and gas resources for these plays. Estimated resources in plays affecting NFS lands in Wyoming are substantial. Of special significance are undiscovered recoverable conventional resources (mean estimate) of approximately 1,010 million barrels of oil, 10,611 billion cubic feet of gas, and 188 million barrels of natural gas liquids assessed in ten plays that include National Forest System lands in the Thunder Basin National Grassland and the Bridger-Teton, Targhee, Caribou, and Shoshone National Forests in Wyoming. Approximately 5,715,570 acres in the forests and grassland are available for leasing or are expected to be available for leasing by mid-1993. Poor accessibility, environmental concerns, and geologic factors such as complex structure and greater drilling depths to potential reservoirs may cause higher exploration risks and operating costs on NFS lands. However, cooperative arrangements with the U.S. Forest Service, in addition to carefully planned exploration and development programs, can facilitate operations in remote and environmentally sensitive areas, and could result in opening new exploration frontiers in Wyoming.
The Water Resources Division of the U.S. Geological Survey, in cooperation with State, county, municipal, and other Federal agencies, obtains a large amount of data pertaining to the water resources of Iowa each water year. These data, accumulated during many water years, constitute a valuable data base for developing an improved understanding of the water resources of the State. To make this data readily available to interested parties outside of the Geological Survey, the data is published annually in this report series entitled “Water Resources Data - Iowa” as part of the National Water Data System. Water resources data for water year 2001 for Iowa consists of records of stage, discharge, and water quality of streams; stage and contents of lakes and reservoirs; and water levels and water quality of ground water. This report, in two volumes, contains stage or discharge records for 132 gaging stations; stage records for 9 lakes and reservoirs; water-quality records for 4 gaging stations; sediment records for 13 gaging stations; and water levels for 163 ground-water observation wells. Also included are peak-flow data for 92 crest-stage partial-record stations, water-quality data from 86 municipal wells, and precipitation data collected at 6 gaging stations and 2 precipitation sites. Additional water data were collected at various sites not included in the systematic data-collection program, and are published here as miscellaneous measurements and analyses. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating local, State, and Federal agencies in Iowa. Records of discharge or stage of streams, and contents or stage of lakes and reservoirs were first published in a series of U.S. Geological Survey water-supply papers entitled “Surface Water Supply of the United States.” Through September 30, 1960, these water-supply papers were published in an annual series; during 1961-65 and 1966-70, they were published in 5- year series. Records of chemical quality, water temperatures, and suspended sediment were published from 1941 to 1970 in an annual series of water-supply papers entitled “Quality of Surface Waters of the United States.” Records of ground-water levels were published from 1935 to 1974 in a series of water-supply papers entitled “Ground-Water Levels in the United States.” Water-supply papers may be consulted in the libraries of the principal cities in the United States, or they may be purchased from Books and Open-File Reports Section, Federal Center, Box 25425, Denver, Colorado 80225. For water years 1961 through 1970, streamflow data were released by the Geological Survey in annual reports on a State-boundary basis. Water-quality records for water years 1964 through 1970 were similarly released either in separate reports or in conjunction with streamflow records. Beginning with the 1971 water year, water data for streamflow, water quality, and ground water is published in official U.S. Geological Survey reports on a State-boundary basis. These official reports carry an identification number consisting of the two-letter State postal abbreviation, the last two digits of the water year, and the volume number. For example, this report is identified as “U.S. Geological Survey Water-Data Report IA-01-1.” These water-data reports are for sale by the National Technical Information Service, U.S. Department of Commerce, Springfield, Virginia 22161.
The Mars Global Digital Dune Database (MGD 3 ) now extends from 90°N to 65°S. The recently released north polar portion (MC‐1) of MGD 3 adds ~844 000 km 2 of moderate‐ to large‐size dark dunes to the previously released equatorial portion (MC‐2 to MC‐29) of the database. The database, available in GIS‐ and tabular‐format in USGS Open‐File Reports, makes it possible to examine global dune distribution patterns and to compare dunes with other global data sets (e.g. atmospheric models). MGD 3 can also be used by researchers to identify areas suitable for more focused studies. The utility of MGD 3 is demonstrated through three example applications. First, the uneven geographic distribution of the dunes is discussed and described. Second, dune‐derived wind direction and its role as ground truth for atmospheric models is reviewed. Comparisons between dune‐derived winds and global and mesoscale atmospheric models suggest that local topography may have an important influence on dune‐forming winds. Third, the methods used here to estimate north polar dune volume are presented and these methods and estimates (1130 km 3 to 3250 km 3 ) are compared with those of previous researchers (1158 km 3 to 15 000 km 3 ). In the near future, MGD 3 will be extended to include the south polar region.
Aerial gamma-ray surveys of the natural environment measure the flux of gamma rays produced by the radioactive decay of 40 K, 214 Bi, and 208 Tl in the upper 10–20 cm of surface materials. 40 K is a radioactive potassium isotope which can be used to estimate the total amount of potassium in the soils and rocks. 214 Bi is a decay product of the 238 U radioactive decay series and is used to estimate the uranium concentrations, and 208 Tl, a decay product of the 232 Th radioactive decay series, is used to estimate thorium concentrations. Aerial gamma-ray data covering the 48 contiguous states of the United States have been compiled to produce maps showing the distributions of equivalent uranium, equivalent thorium, and potassium. This compilation involved processing the aerial survey data from about 470 1° × 2° quadrangle maps. The aerial gamma-ray data were obtained as part of the National Uranium Resource Evaluation (NURE) Program sponsored by the U.S. Department of Energy during the period 1975-1983. References for the Open-File Reports that describe the surveys and data collection can be found in Bendix Field Engineering Corp. (1983). The aerial surveys were flown by contractors using fixed-wing and helicopter systems with 33-50 L (liters) of thallium-activated sodium iodide (NaI (TI)) crystals. The nominal survey altitude used is 122 m. The survey lines were generally east-west with line spacings of 1.6-10 km. Tie lines were flown perpendicular to the flight lines at intervals of 16- 30 km. The data were corrected for background from aircraft contamination and cosmic rays, altitude variations, airborne 214Bi, and Compton scattering. The gamma-ray systems were calibrated using the calibrations pads at Grand Junction, Colorado (Ward, 1978 ) and the dynamic test strip at Lake Mead, Arizona (Geodata International, Inc., 1977).