SEARCH · Geology Reports

Results for “Journal of Interpretation Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS2015

Imaging the magmatic system of Mono Basin, California with magnetotellurics in three--dimensions

A three–dimensional (3D) electrical resistivity model of Mono Basin in eastern California unveils a complex subsurface filled with zones of partial melt, fluid–filled fracture networks, cold plutons, and regional faults. In 2013, 62 broadband magnetotelluric (MT) stations were collected in an array around southeastern Mono Basin from which a 3D electrical resistivity model was created with a resolvable depth of 35 km. Multiple robust electrical resistivity features were found that correlate with existing geophysical observations. The most robust features are two 300 ± 50 km3 near-vertical conductive bodies (3–10 Ω·m) that underlie the southeast and north-eastern margin of Mono Craters below 10 km depth. These features are interpreted as magmatic crystal–melt mush zones of 15 ± 5% interstitial melt surrounded by hydrothermal fluids and are likely sources for Holocene eruptions. Two conductive east–dipping structures appear to connect each magma source region to the surface. A conductive arc–like structure (< 0.9 Ω·m) links the northernmost mush column at 10 km depth to just below vents near Panum Crater, where the high conductivity suggests the presence of hydrothermal fluids. The connection from the southernmost mush column at 10 km depth to below South Coulée is less obvious with higher resistivity (200 Ω·m) suggestive of a cooled connection. A third, less constrained conductive feature (4–10 Ω·m) 15 km deep extending to 35 km is located west of Mono Craters near the eastern front of the Sierra Nevada escarpment, and is coincident with a zone of sporadic, long–period earthquakes that are characteristic of a fluid-filled (magmatic or metamorphic) fracture network. A resistive feature (103–105 Ω·m) located under Aeolian Buttes contains a deep root down to 25 km. The eastern edge of this resistor appears to structurally control the arcuate shape of Mono Craters. These observations have been combined to form a new conceptual model of the magmatic system beneath Mono Craters to a depth of 30 km.

California↗

USGS1997

The roles of time and displacement in velocity-dependent volumetric strain of fault zones

The relationship between measured friction μ A and volumetric strain during frictional sliding was determined using a rate and state variable dependent friction constitutive equation, a common work balance relating friction and volume change, and two types of experimental faults: initially bare surfaces of Westerly granite and rock surfaces separated by a 1 mm layer of less than 90 μm Westerly granite gouge. The constitutive equation is the sum of a constant term representing the nominal resistance to sliding and two smaller terms: a rate dependent term representing the shear viscosity of the fault surface (direct effect), and a term which represents variations in the area of contact (evolution effect). The work balance relationship requires that μ A differs from the frictional resistance that leads to shear heating by the derivative of fault normal displacement with respect shear displacement, d δ n / d δ s . An implication of this relationship is that the rate dependence of d δ n / d δ s contributes to the rate dependence of μ A . Experiments show changes in sliding velocity lead to changes in both fault strength and volume. Analysis of data with the rate and state equations combined with the work balance relationship preclude the conventional interpretation of the direct effect in the rate and state variable constitutive equations. Consideration of a model bare surface fault consisting of an undeformable indentor sliding on a deformable surface reveals a serious flaw in the work balance relationship if volume change is time-dependent. For the model, at zero slip rate indentation creep under the normal load leads to time-dependent strengthening of the fault surface but, according to the work balance relationship, no work is done because compaction or dilatancy can only be induced by shearing. Additional tests on initially bare surfaces and gouges show that fault normal strain in experiments is time-dependent, consistent with the model. This time-dependent fault normal strain, which is not accounted for in the work balance relationship, explains the inconsistency between the constitutive equations and the work balance. For initially bare surface faults, all rate dependence of volume change is due to time dependence. Similar results are found for gouge. We conclude that μ A reflects the frictional resistance that results in shear heating, and no correction needs to be made for the volume changes. The result that time-dependent volume changes do not contribute to μ A is a general result and extends beyond these experiments, the simple indentor model and particular constitutive equations used to illustrate the principle.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Tertiary basin development and tectonic implications, Whipple Detachment System, Colorado River Extensional Corridor, California and Arizona

Colorado River extensional corridor. In the Mohave Mountains and Aubrey Hills of Arizona and the eastern Whipple Mountains of California near Parker Dam, these deposits comprise four unconformity-bounded sequences composed of locally derived epiclastic and volcanic rocks and the Peach Springs Tuff. The three older sequences represent syntectonic units that were deposited coeval with detachment faulting, and the fourth is interpreted to be postextensional. The sequences are correlated between four fault-bounded regions, which are the remnants of four different depositional basins. Similar sequences can be correlated over broad areas of the extensional corridor despite the general lack of widespread units. The basins developed in about the same positions, relative to each other and to volcanic sources, as they occupy at present. This is shown by gradational changes of pre-Tertiary rock types between regions, systematic variations in the abundance of magmatic units, and correlative volcanic units that occur in two adjacent regions. The basins formed in the early Miocene from segmentation of the upper crust into blocks bounded by high-angle faults that trended both parallel and perpendicular to the direction of extension and which were terminated at middle crustal depths by a low-angle detachment fault. Extreme rotation of one large crustal block, which constitutes the central Mohave Mountains, is recorded by a major unconformity in the lower Miocene section of one basin. Because coeval sections that formed in adjoining basins do not record this rotation, the underlying crustal blocks must have been separated by transfer faults that allowed them to rotate independently. These proposed transfer faults are represented at present by major faults with trends that parallel the direction of extension on the Whipple detachment system.

Arizona, California↗

USGS2005

Slicing up the San Francisco Bay Area: Block kinematics and fault slip rates from GPS-derived surface velocities

Observations of surface deformation allow us to determine the kinematics of faults in the San Francisco Bay Area. We present the Bay Area velocity unification (BA??VU??, "bay view"), a compilation of over 200 horizontal surface velocities computed from campaign-style and continuous Global Positioning System (GPS) observations from 1993 to 2003. We interpret this interseismic velocity field using a three-dimensional block model to determine the relative contributions of block motion, elastic strain accumulation, and shallow aseismic creep. The total relative motion between the Pacific plate and the rigid Sierra Nevada/Great Valley (SNGV) microplate is 37.9 ?? 0.6 mm yr-1 directed toward N30.4??W ?? 0.8?? at San Francisco (??2??). Fault slip rates from our preferred model are typically within the error bounds of geologic estimates but provide a better fit to geodetic data (notable right-lateral slip rates in mm yr-1: San Gregorio fault, 2.4 ?? 1.0; West Napa fault, 4.0 ?? 3.0; zone of faulting along the eastern margin of the Coast Range, 5.4 ?? 1.0; and Mount Diablo thrust, 3.9 ?? 1.0 of reverse slip and 4.0 ?? 0.2 of right-lateral strike slip). Slip on the northern Calaveras is partitioned between both the West Napa and Concord/ Green Valley fault systems. The total convergence across the Bay Area is negligible. Poles of rotation for Bay Area blocks progress systematically from the North America-Pacific to North America-SNGV poles. The resulting present-day relative motion cannot explain the strike of most Bay Area faults, but fault strike does loosely correlate with inferred plate motions at the time each fault initiated. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS2014

Investigation of the high-frequency attenuation parameter, κ (kappa), from aftershocks of the 2010 M w 8.8 Maule, Chile earthquake

The Bío Bío region of Chile experienced a vigorous aftershock sequence following the 2010 February 27 M w 8.8 Maule earthquake. The immediate aftershock sequence was captured by two temporary seismic deployments: the Quake Catcher Network Rapid Aftershock Mobilization Program (QCN RAMP) and the Incorporated Research Institutions for Seismology CHile Aftershock Mobilization Program (IRIS CHAMP). Here, we use moderate to large aftershocks ( M L ≥ 4.0) occurring between 2010 March 1 and June 30 recorded by QCN RAMP and IRIS CHAMP stations to determine the spectral decay parameter, kappa ( κ ). First, we compare waveforms and κ estimates from the lower-resolution QCN stations to the IRIS CHAMP stations to ensure the QCN data are of sufficient quality. We find that QCN stations provide reasonable estimates of κ in comparison to traditional seismic sensors and provide valuable additional observations of local ground motion variation. Using data from both deployments, we investigate the variation in κ for the region to determine if κ is influenced primarily by local geological structure, path attenuation, or source properties (e.g. magnitude, mechanism and depth). Estimates of κ for the Bío Bío region range from 0.0022 to 0.0704 s with a mean of 0.0295 s and are in good agreement with κ values previously reported for similar tectonic environments. κ correlates with epicentral distance and, to a lesser degree, with source magnitude. We find little to no correlation between the site kappa, κ 0 , and mapped geology, although we were only able to compare the data to a low-resolution map of surficial geology. These results support an increasing number of studies that suggest κ observations can be attributed to a combination of source, path and site properties; additionally, measured κ are often highly scattered making it difficult to separate the contribution from each of these factors. Thus, our results suggest that contributions from the site, path and source should be carefully considered when interpreting κ values.

Bío Bío Region↗

USGS2010

Development of a global land cover characteristics database and IGBP DISCover from 1 km AVHRR data

Researchers from the U.S. Geological Survey, University of Nebraska-Lincoln and the European Commission's Joint Research Centre, Ispra, Italy produced a 1 km resolution global land cover characteristics database for use in a wide range of continental-to global-scale environmental studies. This database provides a unique view of the broad patterns of the biogeographical and ecoclimatic diversity of the global land surface, and presents a detailed interpretation of the extent of human development. The project was carried out as an International Geosphere-Biosphere Programme, Data and Information Systems (IGBP-DIS) initiative. The IGBP DISCover global land cover product is an integral component of the global land cover database. DISCover includes 17 general land cover classes defined to meet the needs of IGBP core science projects. A formal accuracy assessment of the DISCover data layer will be completed in 1998. The 1 km global land cover database was developed through a continent-by-continent unsupervised classification of 1 km monthly Advanced Very High Resolution Radiometer (AVHRR) Normalized Difference Vegetation Index (NDVI) composites covering 1992-1993. Extensive post-classification stratification was necessary to resolve spectral/temporal confusion between disparate land cover types. The complete global database consists of 961 seasonal land cover regions that capture patterns of land cover, seasonality and relative primary productivity. The seasonal land cover regions were aggregated to produce seven separate land cover data sets used for global environmental modelling and assessment. The data sets include IGBP DISCover, U.S. Geological Survey Anderson System, Simple Biosphere Model, Simple Biosphere Model 2, Biosphere-Atmosphere Transfer Scheme, Olson Ecosystems and Running Global Remote Sensing Land Cover. The database also includes all digital sources that were used in the classification. The complete database can be sourced from the website: http://edcwww.cr.usgs.gov/landdaac/glcc/glcc.html.

International Journal of Remote Sensing↗

USGS2006

Rocks of the Columbia Hills

The Mars Exploration Rover Spirit has identified five distinct rock types in the Columbia Hills of Gusev crater. Clovis Class rock is a poorly sorted clastic rock that has undergone substantial aqueous alteration. We interpret it to be aqueously altered ejecta deposits formed by impacts into basaltic materials. Wishstone Class rock is also a poorly sorted clastic rock that has a distinctive chemical composition that is high in Ti and P and low in Cr. Wishstone Class rock may be pyroclastic or impact in origin. Peace Class rock is a sedimentary material composed of ultramafic sand grains cemented by significant quantities of Mg- and Ca-sulfates. Peace Class rock may have formed when water briefly saturated the ultramafic sands and evaporated to allow precipitation of the sulfates. Watchtower Class rocks are similar chemically to Wishstone Class rocks and have undergone widely varying degrees of near-isochemical aqueous alteration. They may also be ejecta deposits, formed by impacts into Wishstone-rich materials and altered by small amounts of water. Backstay Class rocks are basalt/trachybasalt lavas that were emplaced in the Columbia Hills after the other rock classes were, either as impact ejecta or by localized volcanic activity. The geologic record preserved in the rocks of the Columbia Hills reveals a period very early in Martian history in which volcanic materials were widespread, impact was a dominant process, and water was commonly present.

Journal of Geophysical Research E: Planets↗

USGS2001

Mountains on Io: High-resolution Galileo observations, initial interpretations, and formation models

During three close flybys in late 1999 and early 2000 the Galileo spacecraft acquired new observations of the mountains that tower above Io's surface. These images have revealed surprising variety in the mountains' morphologies. They range from jagged peaks several kilometers high to lower, rounded structures. Some are very smooth, others are covered by numerous parallel ridges. Many mountains have margins that are collapsing outward in large landslides or series of slump blocks, but a few have steep, scalloped scarps. From these observations we can gain insight into the structure and material properties of Io's crust as well as into the erosional processes acting on Io. We have also investigated formation mechanisms proposed for these structures using finite-element analysis. Mountain formation might be initiated by global compression due to the high rate of global subsidence associated with Io's high resurfacing rate; however, our models demonstrate that this hypothesis lacks a mechanism for isolating the mountains. The large fraction (∼40%) of mountains that are associated with paterae suggests that in some cases these features are tectonically related. Therefore we have also simulated the stresses induced in Io's crust by a combination of a thermal upwelling in the mantle with global lithospheric compression and have shown that this can focus compressional stresses. If this mechanism is responsible for some of Io's mountains, it could also explain the common association of mountains with paterae.

Journal of Geophysical Research E: Planets↗

USGS2003

Tidal-bundle sequences in the Jordan Sandstone (Upper Cambrian), southeastern Minnesota, U.S.A.: Evidence for tides along inboard shorelines of the Sauk Epicontinental Sea

This study documents for the first time tidal bundling in a lower Paleozoic sheet sandstone from the cratonic interior of North America, providing insights into the hydrodynamics of ancient epicontinental seas. The Jordan Sandstone (Upper Cambrian) in the Upper Mississippi Valley contains large-scale planar tabular cross-sets with tidal-bundle sequences, which were analyzed in detail at an exceptional exposure. Tidal-bundle sequences (neap-spring-neap cycles) were delineated by foreset thickening-thinning patterns and composite shale drapes, the latter of which represent accumulations of mud during the neap tides of neap-spring-neap tidal cycles. Fourier analysis of the bundle thickness data from the 26 measurable bundle sequences revealed cycles ranging from 15 to 34 bundles per sequence, which suggests a semidiurnal or mixed tidal system along this part of the Late Cambrian shoreline. We extend the tidal interpretation to widespread occurrences of the same facies in outcrops of lesser quality, where the facies is recognizable but too few bundles are exposed for tidal cycles to be measured. By doing so, this study shows that tidally generated deposits have a significant geographic and temporal extent in Upper Cambrian strata of central mid-continent North America. The deposition and preservation of tidal facies was related to the intermittent development of shoreline embayments during transgressions. The tidally dominated deposits filled ravined topographies that were repeatedly developed on the updip parts of the shoreface. Resulting coastal geomorphologies, accompanied perhaps by larger-scale changes in basinal conditions and/or configuration, led to changes in depositional conditions from wave-dominated to tide-dominated. Outcrops of the Jordan Sandstone tidal facies in the Upper Mississippi Valley represent the farthest inboard recorded transmission of ocean-generated tides in the Laurentian epicontinental seas, demonstrating that tidal currents were significant agents in the transport of sand along the far cratonic interior shorelines of Cambrian North America. The results of this study improve the facies-level understanding of the genesis of sheet sandstones. Furthermore, tidalites documented here occur in a specific position within a sequence stratigraphic architecture for the Jordan Sandstone. This provides a framework to compare these ancient deposits and processes to younger (e.g., Carboniferous) epicontinental systems where stratal and sediment dynamics are better documented.

Illinois, Indiana, Iowa, Michigan, Minnesota, Miss↗

USGS2006

Spectrophotometric properties of materials observed by Pancam on the Mars Exploration Rovers: 2. Opportunity

The Panoramic Camera (Pancam) on the Mars Exploration Rover Opportunity acquired visible/near‐infrared multispectral observations of soils and rocks under varying viewing and illumination geometries that were modeled using radiative transfer theory to improve interpretations of the microphysical and surface scattering nature of materials in Meridiani Planum. Nearly 25,000 individual measurements were collected of rock and soil units identified by their color and morphologic properties over a wide range of phase angles (0–150°) at Eagle crater, in the surrounding plains, in Endurance crater, and in the plains between Endurance and Erebus craters through Sol 492. Corrections for diffuse skylight incorporated sky models based on observations of atmospheric opacity throughout the mission. Disparity maps created from Pancam stereo images allowed inclusion of local facet orientation estimates. Outcrop rocks overall exhibited the highest single scattering albedos (≤0.9 at 753 nm), and most spherule‐rich soils exhibited the lowest (≤0.6 at 753 nm). Macroscopic roughness among outcrop rocks varied but was typically larger than spherule‐rich soils. Data sets with sufficient phase angle coverage (resulting in well‐constrained Hapke parameters) suggested that models using single‐term and two‐term Henyey‐Greenstein phase functions exhibit a dominantly broad backscattering trend for most undisturbed spherule‐rich soils. Rover tracks and other compressed soils exhibited forward scattering, while outcrop rocks were intermediate in their scattering behaviors. Some phase functions exhibited wavelength‐dependent trends that may result from variations in thin deposits of airfall dust that occurred during the mission.

Journal of Geophysical Research E: Planets↗

USGS2021

Implications of tagging effects for interpreting the performance of sea lamprey traps in a large river

Abundance estimates can be crucial for managing species of economic concern. The accuracy of these estimates can depend on the methods used to track animals and to estimate abundance from tracking data. We tested experimentally if disparate estimates of trapping efficiency calculated for sea lamprey ( Petromyzon marinus ) in the St. Marys River near Sault Ste. Marie, Canada could be explained by effects related to the invasiveness and handling involved in tagging or the tag size used in the marking procedures. Trapping is used to gauge adult abundance, trapping efficiency, and success of a binational sea lamprey control program in the Laurentian Great Lakes, North America. Our experiment compared nightly catches of sea lamprey marked with external fin clips, surgically-implanted passive integrated transponder tags (PIT-only), and surgically-implanted PIT and acoustic tags (PIT+acoustic). We found no evidence that the probability of being trapped was affected by the added invasiveness and handling of internal tagging. Nightly recaptures of PIT-only tagged sea lamprey, relative to fin-clipped sea lamprey, were not different from expectations based on the numbers of individuals released from each treatment group. Conversely, there was evidence of effects related to tag size. Nightly recaptures of PIT+acoustic tagged sea lamprey, relative to PIT-only tagged sea lamprey, were lower than expected based on numbers of individuals released from each treatment group. Effects related to tag size partially explain the disparate estimates in trapping efficiency observed for sea lamprey.

Ontario↗

USGS2015

Magma extrusion during the Ubinas 2013–2014 eruptive crisis based on satellite thermal imaging (MIROVA) and ground-based monitoring

After 3 years of mild gases emissions, the Ubinas volcano entered in a new eruptive phase on September 2nd, 2013. The MIROVA system (a space-based volcanic hot-spot detection system), allowed us to detect in near real time the thermal emissions associated with the eruption and provided early evidence of magma extrusion within the deep summit crater. By combining IR data with plume height, sulfur emissions, hot spring temperatures and seismic activity, we interpret the thermal output detected over Ubinas in terms of extrusion rates associated to the eruption. We suggest that the 2013–2014 eruptive crisis can be subdivided into three main phases: ( i ) shallow magma intrusion inside the edifice, (ii) extrusion and growing of a lava plug at the bottom of the summit crater coupled with increasing explosive activity and finally, (iii) disruption of the lava plug and gradual decline of the explosive activity. The occurrence of the 8.2 Mw Iquique (Chile) earthquake (365 km away from Ubinas) on April 1st, 2014, may have perturbed most of the analyzed parameters, suggesting a prompt interaction with the ongoing volcanic activity. In particular, the analysis of thermal and seismic datasets shows that the earthquake may have promoted the most intense thermal and explosive phase that culminated in a major explosion on April 19th, 2014. These results reveal the efficiency of space-based thermal observations in detecting the extrusion of hot magma within deep volcanic craters and in tracking its evolution. We emphasize that, in combination with other geophysical and geochemical datasets, MIROVA is an essential tool for monitoring remote volcanoes with rather difficult accessibility, like those of the Andes that reach remarkably high altitudes.

Journal of Volcanology and Geothermal Research↗

USGS2001

Nomad Rover field experiment, Atacama Desert, Chile 1. Science results overview

Nomad was deployed for a 45 day traverse in the Atacama Desert, Chile, during the summer of 1997. During this traverse, 1 week was devoted to science experiments. The goal of the science experiments was to test different planetary surface exploration strategies that included (1) a Mars mission simulation, (2) a science on the fly experiment, where the rover was kept moving 75% of the operation time. (The goal of this operation was to determine whether or not successful interpretation of the environment is related to the time spent on a target. The role of mobility in helping the interpretation was also assessed.) (3) a meteorite search using visual and instrumental methods to remotely identify meteorites in extreme environments, and (4) a time-delay experiment with and without using the panospheric camera. The results were as follow: the remote science team positively identified the main characteristics of the test site geological environment. The science on the fly experiment showed that the selection of appropriate targets might be even more critical than the time spent on a study area to reconstruct the history of a site. During the same operation the science team members identified and sampled a rock from a Jurassic outcrop that they proposed to be a fossil. The presence of paleolife indicators in this rock was confirmed later by laboratory analysis. Both visual and instrumental modes demonstrated the feasibility, in at least some conditions, of carrying out a field search for meteorites by using remote-controlled vehicles. Finally, metrics collected from the observation of the science team operations, and the use team members made of mission data, provided critical information on what operation sequences could be automated on board rovers in future planetary surface explorations.

Atacama Desert↗

USGS2012

Principal component analysis of geodetically measured deformation in Long Valley caldera, eastern California, 1983-1987

Typical geodetic measurements of deformation consist of repeated surveys of a particular geodetic network. Such deformation data can be interpreted as a consequence of one or more self-coherent sources by means of principal component analysis. A self-coherent source is defined as any source that produces deformation that is time and space separable. Principal component analysis then gives the time and space factors that characterize the deformation attributed to each self-coherent source. Geodetic measurements of deformation at Long Valley caldera provide two examples of the application of principal component analysis. A 40-line trilateration network surrounding the caldera was surveyed in midsummer 1983, 1984, 1985, 1986, and 1987. Principal component analysis indicates that the observed deformation can be represented by a single coherent source. The time dependence for that source displays a rapid rate of deformation in 1983–1984 followed by less rapid but uniform rate in the 1984–1987 interval. The spatial factor seems consistent with expansion of a magma chamber beneath the caldera plus some shallow right-lateral slip on a vertical fault in the south moat of the caldera. An independent principal component analysis of the 1982, 1983, 1984, 1985, 1986, and 1987 leveling across the caldera requires two self-coherent sources to explain the deformation. The deformation pattern produced by the larger of these two sources appears to be roughly consistent with that found from the trilateration data. The deformation due to the second source is a nearly uniform tilt in the uplift profile. Presumably, that tilt is simply an artifact of systematic error in the leveling.

Journal of Geophysical Research Solid Earth↗

USGS2011

Sources and physical processes responsible for OH/H2O in the lunarsoil as revealed by the Moon Mineralogy Mapper (M3)

Analysis of two absorption features near 3 μ m in the lunar reflectance spectrum, observed by the orbiting M 3 spectrometer and interpreted as being due to OH and H 2 O, is presented, and the results are used to discuss the processes producing these molecules. This analysis focuses on the dependence of the absorptions on lunar physical properties, including composition, illumination, latitude, and temperature. Solar wind proton-induced hydroxylation is proposed as the creation process, and its products could be a source for other reported types of hydrogen-rich material and water. The irregular and damaged fine-grained lunar soil seems especially adapted for trapping solar wind protons and forming OH owing to abundant dangling oxygen bonds. The M 3 data reveal that the strengths of the two absorptions are correlated and widespread, and both are correlated with lunar composition but in different ways. Feldspathic material seems richer in OH. These results seem to rule out water from the lunar interior and cometary infall as major sources. There appear to be correlations of apparent band strengths with time of day and lighting conditions. However, thermal emission from the Moon reduces the apparent strengths of the M 3 absorptions, and its removal is not yet completely successful. Further, many of the lunar physical properties are themselves intercorrelated, and so separating these dependencies on the absorptions is difficult, due to the incomplete M 3 data set. This process should also operate on other airless silicate surfaces, such as Mercury and Vesta, which will be visited by the Dawn spacecraft in mid-2011.

Journal of Geophysical Research E: Planets↗

USGS2021

Deepwater debrites and linked megaturbidites in confined basins: An example from the Onnuri Basin, East Sea of Korea

We analyzed data from seven piston cores, multi-channel seismic-reflection (MCS) and chirp profiles, and multibeam echosounder (MBES) data to study the distribution, emplacement time, sedimentary facies, and depositional processes of sediment-gravity-flow deposits in the Onnuri Basin, a confined basin in the East Sea. These data reveal that debris flows have traveled ca. 30 km downslope, forming a seismic facies consisting of stacked, wedge-shaped, transparent units separated by high-amplitude continuous reflectors. Analysis of piston cores shows three distinct sedimentary units, throughout the basin. The lowest unit, I, is a debrite containing numerous mud clasts of varying size and color distributed in a mud-rich matrix; it is absent over elevated basinal highs or ridges, such as the Onnuri Ridge, suggesting that local topography controls its distribution. The debrite forms a recognizable acoustically transparent layer on subbottom chirp profiles (av. 7 m thick), covers approximately 500 km 2 , and has an estimated volume of ∼ 3.5 km 3 . The overlying unit, II, contains normally graded beds composed of massive sand, laminated and cross-laminated sand and silt, and a thick cap of structureless mud. This unit is interpreted to be a megaturbidite deposited from turbidity currents that originated from the flow transformation of debris flows on the upper continental slope. The megaturbidite covers the entire basin (at least 650 km 2 ), and has an average thickness of 2.8 m (maximum thickness of 4.35 m), and comprises a volume of 1.8 km 3 . Variations in grain size and sedimentary structures suggest that the megaturbidite was deposited by progressively waning flows that reflected off basin flanks and ridges. The thick (up to 3.65 m) structureless mud cap further indicates deposition in a confined basin. The sharp basal contact, together with the lack of hemipelagic sediments between debrite and overlying megaturbidite, suggest that both were deposited during the same flow event, likely to have originated from a single catastrophic slope failure. Collapsing slide material evolved into a debris flow, from which a turbidite formed by dilution of the debris flow. Radiocarbon dates suggest that the slope failure occurred about 13–11 ka, a time when sea level was ca. 50 m lower than at the present day. Hemipelagic sediments in the topmost unit, III-2, above the megaturbidite indicate that the basin has been stable since ca. 11 ka. We provide robust evidence that submarine slope failures evolve downslope into slides, debris flows, and finally, thick megaturbidites. This contribution highlights the importance of seafloor morphology on the distribution and stratigraphy of submarine flows in confined basins.

Onnuri Basin↗

USGS1994

Geochemistry of the 1989-1990 eruption of redoubt volcano: Part I. Whole-rock major- and trace-element chemistry

The 1989-1990 eruption of Redoubt Volcano produced medium-K calc-alkaline andesite and dacite of limited compositional range (58.2-63.4% SiO2) and entrained quenched andesitic inclusions (55% SiO2) which bear chemical similarities to the rest of the ejecta. The earliest (December 15) magmas are pumiceous, often compositionally banded, and the majority is relatively mafic (< 59% SiO2). The most silicic magmas of the eruption are the late December to early January domes (up to 63.4% SiO2). Subsequent magmas formed domes and rare pumices which converge on 60% SiO2. Chemical variations among ejecta comprise tight, linear, two-component arrays for all elements for which the analytical uncertainty is much less than the compositional range. The two-component arrays are interpreted as mixing arrays between unrelated magmas because several of the arrays are at steep angles to the normal liquid line of descent. Additionally, the felsic endmember cannot be easily related to the mafic endmember by normal high-temperature igneous processes (e.g., the silicic endmember has higher Zr yet lower Hf than the mafic endmember). Also relative enrichments of highly incompatible elements are dramatically different across the arrays. The mixing event must have preceded eruption by a significant, yet unspecified amount of time because groundmass glass compositions are homogeneous for all post-December samples (Swanson et al., 1994-this volume), in spite of the whole-rock chemical diversity. This implies time for additional crystallization after the mixing event. Swanson et al. (1994-this volume) discuss evidence for a potentially different mixing event recorded only in December 15 magmas. Cognate cumulate xenoliths composed of pl+cpx+opx+hb+mt+melt were recovered from January and April deposits. These blocks differ from local batholithic country rock in their low concentrations of incompatible elements (e.g., Rb < 5 ppm vs 20-90 ppm, Ba < 150 ppm vs 300-2000 ppm) and low SiO2 (< 50 wt.% vs > 60 wt.%). They have Mg, Cr, Ni, Sc, and V contents higher than the andesites, but lower than Redoubt basalts and basaltic andesites. Thus, they may be crystallization products of andesites, but do not represent the cumulate residue of basalt fractionation. The xenoliths were probably derived from a shallow or intermediate crustal chamber. ?? 1994.

Journal of Volcanology and Geothermal Research↗

USGS2005

Temporal patterns of Northern Goshawk nest area occupancy and habitat: A retrospective analysis

We studied occupancy and habitat associations of Northern Goshawks (Accipiter gentilis) at nest areas in south-central Oregon in 1992-94. We surveyed 51 pre-1992 nest areas (i.e., historical breeding areas first discovered during 1973-91) for goshawks and used aerial-photograph interpretation to document forest cover conditions and changes over time between areas that were occupied by goshawks and those where we did not detect goshawks (no-response sites). We also surveyed for new nests during 1992-94. Of 38 occupied nests first found in 1992-94 (i.e., post-1992 nest areas), 86% (33/38) were in mid-aged (mean stand DBH 23-53 cm, <15 trees/ha >53 cm DBH) or late (???15 trees/ha >53 cm DBH; mean stand DBH >53 cm) closed (>50% canopy closure) structural-stage forest. Occupancy of historical (pre-1992) nest areas by goshawks was 29% (15/51). Of 46 pre-1992 nest areas that we examined for habitat change, 15 were occupied by goshawks in 1994 and had more mid-aged closed and late closed forest in 12-, 24-, 52-, 120-, and 170-ha circular areas centered on nest locations than did 31 no-response areas. There was no difference in the amount of late closed and mid-aged closed forest in pre-1992 nest areas compared with occupied pre-1992 nest areas. A logistic regression model for all occupied nest areas confirmed that late closed and mid-aged closed forest variables were important indicators of forest conditions that supported breeding pairs. Goshawks were more likely to persist in the historical nest areas that had about 50% of mature and older closed-canopy forest within the 52ha scale. We recommend retaining existing late closed, late open, and mid closed structure within 52ha scale of the nest site. Moreover, late closed and mid closed structure combined should not fall below 50% within the 52-ha scale and should exceed 40% within the 170-ha scale surrounding the nest site. To optimize conditions for breeding goshawks, we recommend retaining large trees (>53 cm DBH) to help preserve stand integrity, maintain closed canopies, and provide connectivity to alternative nest sites within nest areas. ?? 2005 The Raptor Research Foundation, Inc.

Journal of Raptor Research↗