SEARCH · Geology Reports

Results for “Journal Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS1997

Correlated errors in geodetic time series: Implications for time-dependent deformation

Analysis of frequent trilateration observations from the two-color electronic distance measuring networks in California demonstrate that the noise power spectra are dominated by white noise at higher frequencies and power law behavior at lower frequencies. In contrast, Earth scientists typically have assumed that only white noise is present in a geodetic time series, since a combination of infrequent measurements and low precision usually preclude identifying the time-correlated signature in such data. After removing a linear trend from the two-color data, it becomes evident that there are primarily two recognizable types of time-correlated noise present in the residuals. The first type is a seasonal variation in displacement which is probably a result of measuring to shallow surface monuments installed in clayey soil which responds to seasonally occurring rainfall; this noise is significant only for a small fraction of the sites analyzed. The second type of correlated noise becomes evident only after spectral analysis of line length changes and shows a functional relation at long periods between power and frequency of 1/ƒ α , where ƒ is frequency and α≈2. With α=2, this type of correlated noise is termed random-walk noise, and its source is mainly thought to be small random motions of geodetic monuments with respect to the Earth's crust, though other sources are possible. Because the line length changes in the two-color networks are measured at irregular intervals, power spectral techniques cannot reliably estimate the level of 1/ƒ α noise. Rather, we also use here a maximum likelihood estimation technique which assumes that there are only two sources of noise in the residual time series (white noise and random-walk noise) and estimates the amount of each. From this analysis we find that the random-walk noise level averages about 1.3 mm/√yr and that our estimates of the white noise component confirm theoretical limitations of the measurement technique. In addition, the seasonal noise can be as large as 3 mm in amplitude but typically is less than 0.5 mm. Because of the presence of random-walk noise in these time series, modeling and interpretation of the geodetic data must account for this source of error. By way of example we show that estimating the time-varying strain tensor (a form of spatial averaging) from geodetic data having both random-walk and white noise error components results in seemingly significant variations in the rate of strain accumulation; spatial averaging does reduce the size of both noise components but not their relative influence on the resulting strain accumulation model.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

Uplift of the Transantarctic Mountains and the bedrock beneath the East Antarctic ice sheet

In recent years the Transantarctic Mountains (TAM), the largest noncontractional mountain belt in the world, have become the focus of modelers who explained their uplift by a variety of isostatic and thermal mechanisms. A problem with these models is a lack of available data to compare with model predictions. We report here the results of a 312-km-long geophysical traverse conducted in 1993/1994 in the hinterland of the TAM. Using detailed subglacial topography and gravity measurements, we confirm the origin of the TAM as a flexural uplift of the edge of East Antarctica. Using an elastic model with a free edge, we can jointly fit the topography and the gravity with a plate having an elastic thickness of 85±15 km and a preuplift elevation of 700±50 m for East Antarctica. Using a variety of evidence, we argue that the uplift is coincident with a relatively minor tectonic event of transtensional motion between East and West Antarctica during the Eocene rather than the Late Cretaceous rifting event that created the Ross Embayment. We suggest that this transtensional motion caused the continuous plate to break, which created an escarpment that significantly increased the rates of erosion and exhumation. Results from the geophysical traverse also extend our knowledge of the bedrock geology from the exposures within the TAM to the ice covered interior. Our interpretation suggests that the Ferrar flood basalts extend at least 100 km westward under the ice. The Beacon Supergroup of Paleozoic and Mesozoic sediments thins gradually under the ice and its reconstructed thickness is reminiscent of profiles of foreland basins. Finally, there is no indication in the gravity field for an incomplete rebound due to significant melting of the East Antarctic ice sheet since the last glacial period.

Journal of Geophysical Research B: Solid Earth↗

USGS1989

Significance of loessite in the Maroon Formation (Middle Pennsylvanian to Lower Permian), Eagle Basin, northwest Colorado

Quaternary loess deposits are widespread on the earth's surface, yet pre-Quaternary loess deposits have rarely been reported. The Maroon Formation (Middle Pennsylvanian to Lower Permian) of the Eagle Basin, northwest Colorado, includes a siltstone-dominated facies interpreted as loessite (lithified loess) along its downwind basin margin. The section of inferred loessite in the Maroon Formation is locally at least 490 m thick and consists in large part of structureless and nearly structureless beds of homogeneous sandy siltstone. Bed contacts are generally planar to undulatory and are either horizontal or are characterized by gentle relief. Loessite beds are separated by common claystone drapes and weakly developed paleosols, and by rare pond deposits, channel deposits, and eolian-ripple-laminated deposits. The loess interpretation is based on 1) the homogeneity and dominance of the sandy silt grain-size; 2) the relative lack of primary sedimentary structures; 3) the gentle character of most bedding contacts and the common mantling of irregular depositional topography; 4) the inferred paleogeographic setting; and 5) the absence of suitable alternative interpretations. The loessite grades laterally into mixed fluvial-eolian deposits of the Maroon Formation in the main part of Eagle Basin, which served as the loessite sediment source. Deposition of the Maroon Formation was probably strongly affected by cyclic climatic changes synchronous with fluctuations in late Paleozoic continental ice sheets. The paleogeography and paleoclimatology of the Maroon Formation depositional system are not unique, suggesting that there are probably many other ancient loessites that have gone unrecognized.

Journal of Sedimentary Petrology↗

USGS1963

Disease and infection in the Tetraonidae

Disease is one of many factors advanced to explain the fluctuations of grouse populations, but no profound study of natural disease losses in Tetraonidae exists. The literature contains frequent references to THE grouse disease, although many potential pathogens are listed in numerous surveys and limited investigations, and the relevant data indicate that no single etiologic agent is universally responsible for disease in grouse. Few experimental infections or related studies on parasite biology have been attempted. Well-trained personnel and specialized facilities are required for research and analysis (1) to develop new methods of interpretation to be used with existing census techniques, (2) to conduct intensive studies of ecological factors of host and habitat, and (3) to establish base lines for recognition of deviations from the norm. Disease in wildlife can be controlled only through management procedures based on information concerning the biology of pathogens, hosts, and environments. It cannot be studied as a separate entity if its impact on survival or population fluctuations of grouse is to be correctly assessed.

Journal of Wildlife Management↗

USGS2022

Magnetotelluric investigations of the Kīlauea Volcano, Hawaii

In 2002 and 2003 a collaborative effort was undertaken between Lawrence Berkeley National Laboratory, Sandia National Laboratories, the U.S. Geological Survey (USGS) Menlo Park, the USGS Hawaiian Volcano Observatory, and Electromagnetic Instruments Inc. to study the Kīlauea volcano in Hawaii using the magnetotelluric (MT) technique. The work was motivated by a desire to improve understanding of the magma reservoirs and conduits within Kīlauea and the East and Southwest Rift zones, which has implications for understanding Kīlauea's plumbing system. An improved understanding of the rift zones has implications in understanding large-scale landslides that are generated in the Hilina Slump, which produce significant impacts on coastal communities. Up to eight stations operated simultaneously, with multiple remote reference sites, and data were processed using multi-station robust processing techniques. In total, data were acquired at 70 sites over the Southwest and East rift zones. Good to excellent quality data were obtained even in the harshest conditions, such as those encountered on the fresh lava flows of the East Rift Zone, where electrical contact resistances are on the order of 100 kΩ. A three-dimensional (3D) MT model study was done to guide interpretation of the observed MT measurements. Synthetic modeling demonstrates that conductive bodies in the upper 3 km can be spatially resolved where MT station sampling is good. Resistivity anomalies in the 3D inversions have a high degree of spatial correlation with previously published seismic velocity anomalies beneath Kīlauea. Melt fractions between 0.096 and 0.117 are calculated for the Kīlauea and Puʻuʻōʻō low resistivity anomalies, respectively.

Hawai'i↗

USGS2012

Magnetic grain-size variations through an ash flow sheet: influence on magnetic properties and implications for cooling history

Rock magnetic studies of tuffs are essential to the interpretation of paleomagnetic data derived from such rocks, provide a basis for interpretation of aeromagnetic data over volcanic terranes, and yield insights into the depositional and cooling histories of ash flow sheets. A rhyolitic ash flow sheet, the Miocene-aged Tiva Canyon Member of the Paintbrush Tuff, contains both titanomagnetite phenocrysts, present in the magma prior to eruption, and cubic Fe-oxide microcrystals that grew after emplacement. Systematic variations in the quantity and magnetic grain size of the microcrystals produce large variations in magnetic properties through a section of the ash flow sheet penetrated in a borehole on the Nevada Test Site. Natural remanent magnetization varies from less than 1 × 10 −4 to more than 8 × 10 −4 A m 3 kg −1 , and in-phase magnetic susceptibility varies from less than 1 × 10 −6 to more than 10 × 10 −6 m 3 kg −1 . The microcrystals, which include both magnetite and maghemite, have Curie points and maximum unblocking temperatures between 580°C and 640°C. Rock magnetic data, including in-phase and quadrature magnetic susceptibilities as well as hysteresis parameters, demonstrate that these microcrystals are of superparamagnetic and single-domain sizes. Titanomagnetite phenocrysts are the dominant remanence carriers in the central 50 m of the section, whereas microcrystals are important contributors to remanent magnetization and magnetic susceptibility in two 15-m-thick zones at the top and bottom. Within these zones the size of microcrystals decreases both toward the quenched margins and toward the interior of the sheet. The decrease in microcrystal size toward the interior of the sheet is interpreted to indicate the presence of a cooling break; possibly represented by a concentration of pumice. Laboratory heating produces changes in magnetic properties which vary complexly from sample to sample. Such changes include (1) decrease in saturation magnetization, (2) both increase and decrease in in-phase and quadrature magnetic susceptibilities, and (3) shifts in coercivity spectra. The complex sample-to-sample variation in response to heating is attributed to differences in initial grain-size distributions.

Journal of Geophysical Research↗

USGS1997

Deep seismic structure and tectonics of northern Alaska: Crustal-scale duplexing with deformation extending into the upper mantle

Seismic reflection and refraction and laboratory velocity data collected along a transect of northern Alaska (including the east edge of the Koyukuk basin, the Brooks Range, and the North Slope) yield a composite picture of the crustal and upper mantle structure of this Mesozoic and Cenozoic compressional orogen. The following observations are made: (1) Northern Alaska is underlain by nested tectonic wedges, most with northward vergence (i.e., with their tips pointed north). (2) High reflectivity throughout the crust above a basal decollement, which deepens southward from about 10 km depth beneath the northern front of the Brooks Range to about 30 km depth beneath the southern Brooks Range, is interpreted as structural complexity due to the presence of these tectonic wedges, or duplexes. (3) Low reflectivity throughout the crust below the decollement is interpreted as minimal deformation, which appears to involve chiefly bending of a relatively rigid plate consisting of the parautochthonous North Slope crust and a 10- to 15-km-thick section of mantle material. (4) This plate is interpreted as a southward verging tectonic wedge, with its tip in the lower crust or at the Moho beneath the southern Brooks Range. In this interpretation the middle and upper crust, or all of the crust, is detached in the southern Brooks Range by the tectonic wedge, or indentor: as a result, crust is uplifted and deformed above the wedge, and mantle is depressed and underthrust beneath this wedge. (5) Underthrusting has juxtaposed mantle of two different origins (and seismic velocities), giving rise to a prominent sub-Moho reflector.

Journal of Geophysical Research B: Solid Earth↗

USGS2017

Quantifying the effects of wildfire on changes in soil properties by surface burning of soils from the Boulder Creek Critical Zone Observatory

Study region This study used intact soil cores collected at the Boulder Creek Critical Zone Observatory near Boulder, Colorado, USA to explore fire impacts on soil properties. Study focus Three soil scenarios were considered: unburned control soils, and low- and high-temperature burned soils. We explored simulated fire impacts on field-saturated hydraulic conductivity, dry bulk density, total organic carbon, and infiltration processes during rainfall simulations. New hydrological insights for the region Soils burned to high temperatures became more homogeneous with depth with respect to total organic carbon and bulk density, suggesting reductions in near-surface porosity. Organic matter decreased significantly with increasing soil temperature. Tension infiltration experiments suggested a decrease in infiltration rates from unburned to low-temperature burned soils, and an increase in infiltration rates in high-temperature burned soils. Non-parametric statistical tests showed that field-saturated hydraulic conductivity similarly decreased from unburned to low-temperature burned soils, and then increased with high-temperature burned soils. We interpret these changes result from the combustion of surface and near-surface organic materials, enabling water to infiltrate directly into soil instead of being stored in the litter and duff layer at the surface. Together, these results indicate that fire-induced changes in soil properties from low temperatures were not as drastic as high temperatures, but that reductions in surface soil water repellency in high temperatures may increase infiltration relative to low temperatures.

Colorado↗

USGS2024

Indications of preferential groundwater seepage feeding northern peatland pools

Groundwater seepage from underlying permeable glacial sedimentary structures, such as eskers, has been hypothesized to directly feed pools in northern peat bogs. These hypotheses directly contradict classical peat bog models for ombrogenous systems, wherein meteoric water is the sole water input to these systems. Variations in the underlying mineral sediment in contact with the peat imply that unrecognized hydrogeologic connectivity may exist with pools in northern peat bogs, particularly where high permeability materials are in contact with the peat. Seepage dynamics originating from these structural variations were investigated using a suite of thermal and hydrogeophysical methods deployed around pools in a peat bog of northeastern Maine, USA. Thermal characterization methods mapped anomalies that were confirmed as matrix seepage or preferential flow pathways (PFPs). Geochemical methods were employed at identified thermal anomalies to confirm upwelling of solute-rich groundwater. Conduits around pools were associated with surficial terminations of suspected peat pipes, based on the inference of pathways extending down into the peat, that focus flow through PFPs in the peat matrix. Discharge also occurred through the peat matrix adjacent to suspected pipe structures and matrix seepage rates were quantified using analysis of diurnal temperature signals recorded at multiple depths. Seepage rates, with a maximum of nearly 0.4 m/d, were measured at localized points around pools. Periods of synchronized temperatures paired with highly muted diurnal temperature signals, recorded in diurnal temperature with depth data, were interpreted qualitatively as activation of strong upward discharge rates through suspected peat pipes. These time periods correlated strongly with local precipitation events around the peatland. Ground-penetrating radar surveys revealed discontinuities in the low permeability glacio-marine clay at the mineral sediment-peat interface, interpreted to be regional glacial esker deposits, which were located beneath and around pools. Heat tracing, specific conductance contrasts, seepage rates, and trace metal concentrations all imply groundwater seepage originating from underlying permeable glacial esker deposits and directly sourcing pools. Preferential groundwater inputs into northern peat bogs may play a key role in developing and maintaining pool systems, with enhanced solute transport impacting peatland ecology, water resources, and carbon cycling.

Maine↗

USGS2006

V P and V S structure of the Yellowstone hot spot from teleseismic tomography: Evidence for an upper mantle plume

The movement of the lithosphere over a stationary mantle magmatic source, often thought to be a mantle plume, explains key features of the 16 Ma Yellowstone–Snake River Plain volcanic system. However, the seismic signature of a Yellowstone plume has remained elusive because of the lack of adequate data. We employ new teleseismic P and S wave traveltime data to develop tomographic images of the Yellowstone hot spot upper mantle. The teleseismic data were recorded with two temporary seismograph arrays deployed in a 500 km by 600 km area centered on Yellowstone. Additional data from nearby regional seismic networks were incorporated into the data set. The V P and V S models reveal a strong low-velocity anomaly from ∼50 to 200 km directly beneath the Yellowstone caldera and eastern Snake River Plain, as has been imaged in previous studies. Peak anomalies are −2.3% for V P and −5.5% for V S . A weaker, anomaly with a velocity perturbation of up to −1.0% V P and −2.5% V S continues to at least 400 km depth. This anomaly dips 30° from vertical, west-northwest to a location beneath the northern Rocky Mountains. We interpret the low-velocity body as a plume of upwelling hot, and possibly wet rock, from the mantle transition zone that promotes small-scale convection in the upper ∼200 km of the mantle and long-lived volcanism. A high-velocity anomaly, 1.2% V P and 1.9% V S , is located at ∼100 to 250 km depth southeast of Yellowstone and may represent a downwelling of colder, denser mantle material.

Idaho, Montana, Nevada, Oregon, Utah, Wyoming↗

USGS2012

Minor and trace element geochemistry of volcanic rocks dredged from the Galapagos spreading center: Role of crystal fractionation and mantle heterogeneity

A wide range of rock types (abyssal tholeiite, Fe-Ti-rich basalt, andesite, and rhyodacite) were dredged from near 95°W and 85°W on the Galapagos spreading center. Computer modeling of major element compositions has shown that these rocks could be derived from common parental magmas by successive degrees of fractional crystallization. However, the P 2 O 5 /K 2 O ratio averages 0.83 at 95°W and 1.66 at 85°W and implies distinct mantle source compositions for the two areas. These source regions also have different rare earth element (REE) abundance patterns, with [La/Sm] EF = 0.67 at 95°W and 0.46 at 85°W. The sequence of fractionated lavas differs for the two areas and indicates earlier fractionation of apatite and titanomagnetite in the lavas from 95°W. The mantle source regions for these two areas are interpreted to be depleted in incompatible (and volatile?) elements, although the source region beneath 95°W is less severely depleted in La and K. Incompatible trace element abundances in 26 samples are used to infer that the range of Fe-Ti-rich basalt from 85°W represents 19 to 35% residual liquid following crystal fractionation of a mineral assemblage of plagioclase, clinopyroxene, and lesser olivine. The most highly differentiated samples have also had less than 1% titanomagnetite removed. Most samples from 85°W can be related to a common parental magma that contained approximately 9 wt % FeO*, 1 wt % TiO 2 , and had an Mg number (Mg# = 100 Mg/(Mg + Fe 2+ )) of about 65. Although the samples from 95°W cannot all be derived from a common parental magma, the inferred parental magmas may have been derived by varying degrees of partial melting of a common source. The fractionation sequence consists of two parts: an initial iron enrichment trend followed by a silica enrichment trend. We interpret the trace element data to indicate that the most iron rich lavas represent about 32% residual liquid derived by crystal fractionation of plagioclase, clinopyroxene, and lesser olivine from a parental magma with an Mg number of about 66. The silica enrichment trend results from crystallization of titanomagnetite and some apatite. Fractionation of pigeonite, which is a minor phase in the major element models, cannot be distinguished from clinopyroxene fractionation by using trace elements.

Journal of Geophysical Research Solid Earth↗

USGS2012

The crustal structure of the Wrangellia Terrane along the East Glenn Highway, eastern‐southern Alaska

Recently acquired seismic refraction data from eastern‐southern Alaska provide new information on the structure and composition of the Wrangellia and adjacent terranes. The data comprise a 160‐km‐long refraction profile along the East Glenn (Tok‐Cutoff) Highway that was collected as part of the U.S. Geological Survey's multidisciplinary Trans‐Alaska Crustal Transect program. The upper 3 km of the Wrangellia terrane and associated rocks is characterized by low compressional wave velocities (V p = 1.9, 3.3, 4.6, 5.6 km s −1 ) and high‐velocity gradients common to most onshore seismic refraction profiles. There is also clear seismic expression of the West Fork fault system as a steep, down‐to‐the‐southwest fault that separates the Peninsular terrane to the southwest and the metamorphic complex of Gulkana River to the northeast. In contrast, no seismic expression occurs for the Paxson Lake fault, which separates the Wrangellia terrane from the metamorphic complex of Gulkana River. Adjacent to the Denali fault, within the Wrangellia terrane, two high‐velocity bodies (V p = 6.6 km s −1 ) occur in the upper crust. One of these extends to ∼10‐km depth and correlates with a late Paleozoic dioritic complex, suggesting that the Wrangellia terrane is at least 10 km thick in this part of Alaska. From 5 to 23 km depth, the crust appears seismically homogeneous, with velocity increasing from V p = 6.2 to V p = 6.6 km s −1 . Beneath this level, the crust is less well resolved, although evidence exists for a low‐velocity zone between 23 and 26 km and a possible southwest dipping interface at 35 km. No identifiable mantle refraction or reflection is observed, possibly indicating a crust as thick as 55 km. The relatively low seismic velocities in the upper 23 km of the crust compare favorably with laboratory‐measured velocities on pelitic schists and intermediate‐composition plutonic rocks (granites and granodiorites), both of which are recognized in Wrangellia. We interpret the seismic velocities to indicate that silicic‐to‐intermediate‐composition rocks are important constituents of the basement of this part of Wrangellia. Geologic evidence indicates that the Alaskan part of the Wrangellia terrane is a Paleozoic and Mesozoic island arc: our seismic evidence indicates it may have been built mostly on continental crust as opposed to the fragment of Wrangellia from Vancouver Island which was probably built on oceanic crust.

Alaska↗

USGS2007

Spectral element modelling of fault-plane reflections arising from fluid pressure distributions

The presence of fault-plane reflections in seismic images, besides indicating the locations of faults, offers a possible source of information on the properties of these poorly understood zones. To better understand the physical mechanism giving rise to fault-plane reflections in compacting sedimentary basins, we numerically model the full elastic wavefield via the spectral element method (SEM) for several different fault models. Using well log data from the South Eugene Island field, offshore Louisiana, we derive empirical relationships between the elastic parameters (e.g. P-wave velocity and density) and the effective-stress along both normal compaction and unloading paths. These empirical relationships guide the numerical modelling and allow the investigation of how differences in fluid pressure modify the elastic wavefield. We choose to simulate the elastic wave equation via SEM since irregular model geometries can be accommodated and slip boundary conditions at an interface, such as a fault or fracture, are implemented naturally. The method we employ for including a slip interface retains the desirable qualities of SEM in that it is explicit in time and, therefore, does not require the inversion of a large matrix. We performa complete numerical study by forward modelling seismic shot gathers over a faulted earth model using SEM followed by seismic processing of the simulated data. With this procedure, we construct post-stack time-migrated images of the kind that are routinely interpreted in the seismic exploration industry. We dip filter the seismic images to highlight the fault-plane reflections prior to making amplitude maps along the fault plane. With these amplitude maps, we compare the reflectivity from the different fault models to diagnose which physical mechanism contributes most to observed fault reflectivity. To lend physical meaning to the properties of a locally weak fault zone characterized as a slip interface, we propose an equivalent-layer model under the assumption of weak scattering. This allows us to use the empirical relationships between density, velocity and effective stress from the South Eugene Island field to relate a slip interface to an amount of excess pore-pressure in a fault zone. ?? 2007 The Authors Journal compilation ?? 2007 RAS.

Geophysical Journal International↗

USGS2016

Hydrologic connectivity: Quantitative assessments of hydrologic-enforced drainage structures in an elevation model

Elevation data derived from light detection and ranging present challenges for hydrologic modeling as the elevation surface includes bridge decks and elevated road features overlaying culvert drainage structures. In reality, water is carried through these structures; however, in the elevation surface these features impede modeled overland surface flow. Thus, a hydrologically-enforced elevation surface is needed for hydrodynamic modeling. In the Delaware River Basin, hydrologic-enforcement techniques were used to modify elevations to simulate how constructed drainage structures allow overland surface flow. By calculating residuals between unfilled and filled elevation surfaces, artificially pooled depressions that formed upstream of constructed drainage structure features were defined, and elevation values were adjusted by generating transects at the location of the drainage structures. An assessment of each hydrologically-enforced drainage structure was conducted using field-surveyed culvert and bridge coordinates obtained from numerous public agencies, but it was discovered the disparate drainage structure datasets were not comprehensive enough to assess all remotely located depressions in need of hydrologic-enforcement. Alternatively, orthoimagery was interpreted to define drainage structures near each depression, and these locations were used as reference points for a quantitative hydrologic-enforcement assessment. The orthoimagery-interpreted reference points resulted in a larger corresponding sample size than the assessment between hydrologic-enforced transects and field-surveyed data. This assessment demonstrates the viability of rules-based hydrologic-enforcement that is needed to achieve hydrologic connectivity, which is valuable for hydrodynamic models in sensitive coastal regions. Hydrologic-enforced elevation data are also essential for merging with topographic/bathymetric elevation data that extend over vulnerable urbanized areas and dynamic coastal regions.

Journal of Coastal Research↗

USGS1985

Geophysical techniques for reconnaissance investigations of soils and surficial deposits in mountainous terrain

Two techniques were assessed for their capabilities in reconnaissance studies of soil characteristics: depth to the water table and depth to bedrock beneath surficial deposits in mountainous terrain. Ground-penetrating radar had the best near-surface resolution in the upper 2 m of the profile and provided continuous interpretable imagery of soil profiles and bedrock surfaces. Where thick colluvium blankets side slopes, the GPR could not consistently define the bedrock interface. In areas with clayey or shaley sediments, the GPR is also more limited in defining depth and is less reliable. Seismic refraction proved useful in determining the elevation of the water table and depth to bedrock, regardless of thickness of overlying material, but could not distinguish soil-profile characteristics.

Soil Science Society of America Journal↗

USGS2020

Wetlands in agricultural landscapes—Significant findings and recent advances from CEAP-Wetlands

The Wetlands Component of the USDA's Conservation Effects Assessment Project (CEAP-Wetlands) is a multi-agency effort advancing science related to quantifying and interpreting effects and effectiveness of conservation practices and programs on ecosystem services provided by wetlands in agricultural landscapes. This special section originated from a symposium held at the 73rd Soil and Water Conservation Society's International Annual Conference in Albuquerque New Mexico, July 29 to August 1, 2018. The symposium was jointly organized by the USDA Natural Resources Conservation Service and the US Geological Survey. To facilitate CEAP-Wetlands efforts, several regional assessments were conducted across the United States. These regional assessments were designed to address science gaps hindering wetland conservation and to develop tools facilitating conservation assessments. Conservation decisions affect not just agricultural wetlands, but also the services that these complex ecosystems provide to society. Papers in this special section of the Journal of Soil and Water Conservation present key findings and recent advances from several CEAP-Wetlands regional assessments and discuss the significant contributions of each assessment to an ever-increasing understanding of wetland ecosystems and their provisioning of ecosystem services. Modeling efforts using the Agricultural Policy and Environmental eXtender (APEX) and other process-based models are an integral component of CEAP-Wetlands. Results of these modeling efforts are also presented, and conservation implications are discussed.

Journal of Soil and Water Conservation↗

USGS2020

Managing plague on prairie dog colonies: Insecticides as ectoparasiticides

Human health practitioners and wildlife biologists use insecticides to manage plague by suppressing fleas (Siphonaptera), but insecticides can also kill other ectoparasites. We investigated effects of deltamethrin and fipronil on ectoparasites from black-tailed prairie dogs ( Cynomys ludovicianus , BTPDs). In late July, 2018, we treated three sites with 0.05% deltamethrin dust and 5 sites with host-fed 0.005% fipronil grain. Three non-treated sites functioned as experimental baselines. We collected ectoparasites before treatments (June-July, 2018) and after treatments (August-October, 2018, June-July, 2019). Both deltamethrin and fipronil suppressed fleas for at least 12 months. Deltamethrin had no detectable effect on mites (Arachnida). Fipronil suppressed mites for at least 12 months. Lice (Phthiraptera) were scarce on non-treated sites throughout the study, complicating interpretation. Concentrating on eight sites where all three ectoparasites where found in June-July, 2018 (before treatments), flea intensity was greatest on BTPDs carrying many lice and mites. These three ectoparasites co-occurred at high numbers, which might facilitate plague transmission in some cases. Lethal effects of insecticides on ectoparasite communities are potentially advantageous in the context of plague management.

South Dakota↗

USGS1985

Maceral distributions in Illinois coals and their paleoenvironmental implications

For purposes of assessing the maceral distribution of Illinois (U.S.A.) coals analyses were assembled for 326 face channel and drill core samples from 24 coal members of the Pennsylvanian System. The inertinite content of coals from the Missourian and Virgilian Series averages 16.1% (mineral free), compared to 9.4% for older coals from the Desmoinesian and older Series. This indicates there was generally a higher state of oxidation in the peat that formed the younger coals. This state probably resulted from greater exposure of these peats to weathering as the climate became drier and the water table lower than was the case for the older coals, although oxidation during allochthonous deposition of inertinite components is a genetic factor that needs further study to confirm the importance of the climate. Regional variation of the vitrinite-inertinite ratio (V-I), on a mineral- and micrinite-free basis, was observed in the Springfield (No. 5) and Herrin (No. 6) Coal Members to be related to the geographical position of paleochannel (river) deposits known to have been contemporaneous with the peats that formed these two coal strata. The V-I ratio is highest (generally 12–27) in samples from areas adjacent to the channels, and lower (5–11) some 10–20 km away. We interpret the V-I ratio to be an inverse index of the degree of oxidation to which the original peat was exposed. High V-I ratio coal located near the channels probably formed under more anoxic conditions than did the lower V-I ratio coal some distance away from the channels. The low V-I ratio coal probably formed in areas of the peat swamp where the watertable was generally lower than the channel areas.

International Journal of Coal Geology↗