Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Clays and Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
USGS2001

Mars Global Surveyor Thermal Emission Spectrometer experiment: Investigation description and surface science results

The Thermal Emission Spectrometer (TES) investigation on Mars Global Surveyor (MGS) is aimed at determining (1) the composition of surface minerals, rocks, and ices; (2) the temperature and dynamics of the atmosphere; (3) the properties of the atmospheric aerosols and clouds; (4) the nature of the polar regions; and (5) the thermophysical properties of the surface materials. These objectives are met using an infrared (5.8- to 50-μm) interferometric spectrometer, along with broadband thermal (5.1- to 150-μm) and visible/near-IR (0.3- to 2.9-μm) radiometers. The MGS TES instrument weighs 14.47 kg, consumes 10.6 W when operating, and is 23.6×35.5×40.0 cm in size. The TES data are calibrated to a 1-σ precision of 2.5 −6 ×10 −8 W cm −2 sr −1 /cm −1 , 1.6×10 −6 W cm −2 sr −1 , and ∼0.5 K in the spectrometer, visible/near-IR bolometer, and IR bolometer, respectively. These instrument subsections are calibrated to an absolute accuracy of ∼4×10 −8 W cm −2 sr −1 /cm −1 (0.5 K at 280 K), 1–2%, and ∼1–2 K, respectively. Global mapping of surface mineralogy at a spatial resolution of 3 km has shown the following: (1) The mineralogic composition of dark regions varies from basaltic, primarily plagioclase feldspar and clinopyroxene, in the ancient, southern highlands to andesitic, dominated by plagioclase feldspar and volcanic glass, in the younger northern plains. (2) Aqueous mineralization has produced gray, crystalline hematite in limited regions under ambient or hydrothermal conditions; these deposits are interpreted to be in-place sedimentary rock formations and indicate that liquid water was stable near the surface for a long period of time. (3) There is no evidence for large-scale (tens of kilometers) occurrences of moderate-grained (>50-μm) carbonates exposed at the surface at a detection limit of ∼10%. (4) Unweathered volcanic minerals dominate the spectral properties of dark regions, and weathering products, such as clays, have not been observed anywhere above a detection limit of ∼10%; this lack of evidence for chemical weathering indicates a geologic history dominated by a cold, dry climate in which mechanical, rather than chemical, weathering was the significant form of erosion and sediment production. (5) There is no conclusive evidence for sulfate minerals at a detection limit of ∼15%. The polar region has been studied with the following major conclusions: (1) Condensed CO 2 has three distinct end-members, from fine-grained crystals to slab ice. (2) The growth and retreat of the polar caps observed by MGS is virtually the same as observed by Viking 12 Martian years ago. (3) Unique regions have been identified that appear to differ primarily in the grain size of CO 2 ; one south polar region appears to remain as black slab CO 2 ice throughout its sublimation. (4) Regional atmospheric dust is common in localized and regional dust storms around the margin and interior of the southern cap. Analysis of the thermophysical properties of the surface shows that (1) the spatial pattern of albedo has changed since Viking observations, (2) a unique cluster of surface materials with intermediate inertia and albedo occurs that is distinct from the previously identified low-inertia/bright and high-inertia/dark surfaces, and (3) localized patches of high-inertia material have been found in topographic lows and may have been formed by a unique set of aeolian, fluvial, or erosional processes or may be exposed bedrock.

Journal of Geophysical Research E: Planets↗
USGS2003

Hydrogeology of the Tully Trough, southern Onondaga County and northern Cortland County, New York

A trough valley near Tully, N.Y. was formed by the same glacial processes that formed the Finger Lake valleys to the west. Glacial ice eroded a preglacial bedrock divide along the northern rim of the Allegheny Plateau and deepened a preglacial valley to form a trough valley. Subsequent meltwater issuing from the ice transported and deposited large amounts of sediment which partly filled the trough. The Tully trough contains three distinct segments—the West Branch valley of the southward-flowing Tioughnioga River in the south, the Valley Heads Moraine near Tully, and the Tully valley of the northward-flowing Onondaga Creek in the north. The West Branch valley segment south of the moraine contains a two-aquifer system—a surficial unconfined sand and gravel aquifer and a confined basal sand and gravel aquifer that rests on bedrock, separated by a thick, fine-grained glaciolacustrine fine sand, silt, and clay unit. Water quality in the surficial aquifer is generally good, although it is typically hard. Water in the basal, confined aquifer is more mineralized and yields less water to wells than the surficial aquifer. The Valley Heads Moraine near Tully consists of layers of sand and gravel, fine sand, silt, clay, and till. The land surface contains many kettle-hole lakes, ponds, wetlands, and dry depressions. The moraine contains several aquifers, some of which are discontinuous. Water quality in the shallow aquifers is generally good, although hard. Water quality in the deep aquifer is generally good, although slightly mineralized by water discharging upward from shale. The Tully valley segment north of the moraine has a confined basal sand-and-gravel aquifer that is overlain by a thick layer of lacustrine silt and clay in the southern part of the valley and becomes interlayered with sand and some fine gravel in the northern part. Most homeowners obtain their water supply from streams or springs along the valley walls or from wells. Water from wells completed in coarse-grained sediment on the north side of the moraine and from the basal aquifer is generally fresh, but water from deep wells finished in the basal aquifer north of Solvay Road contains high concentrations of sodium chloride and calcium sulfate that presumably leached from halite and gypsum minerals within the bedrock.

New York↗
USGS2016

Groundwater

Introduction Groundwater represents the terrestrial subsurface component of the hydrologic cycle. As such, groundwater is generally in motion, moving from elevated areas of recharge to lower areas of discharge. Groundwater usually moves in accordance with Darcy’s law (Dalmont, Paris: Les Fontaines Publiques de la Ville de Dijon, 1856). Groundwater residence times can be under a day in small upland catchments to over a million years in subcontinental-sized desert basins. The broadest definition of groundwater includes water in the unsaturated zone, considered briefly here. Water chemically bound to minerals, as in gypsum (CaSO 4 • 2H 2 O) or hydrated clays, cannot flow in response to gradients in total hydraulic head (pressure head plus elevation head); such water is thus usually excluded from consideration as groundwater. In 1940, M. King Hubbert showed Darcy’s law to be a special case of thermodynamically based potential field equations governing fluid motion, thereby establishing groundwater hydraulics as a rigorous engineering science ( Journal of Geology 48, pp. 785–944). The development of computer-enabled numerical methods for solving the field equations with real-world approximating geometries and boundary conditions in the mid-1960s ushered in the era of digital groundwater modeling. An estimated 30 percent of global fresh water is groundwater, compared to 0.3 percent that is surface water, 0.04 percent atmospheric water, and 70 percent that exists as ice, including permafrost ( Shiklomanov and Rodda 2004 , cited under Groundwater Occurrence ). Groundwater thus constitutes the vast majority—over 98 percent—of the unfrozen fresh-water resources of the planet, excluding surface-water reservoirs. Environmental dimensions of groundwater are equally large, receiving attention on multiple disciplinary fronts. Riparian, streambed, and spring-pool habitats can be sensitively dependent on the amount and quality of groundwater inputs that modulate temperature and solutes, including nutrients and dissolved oxygen. Groundwater withdrawals can negatively impact riparian habitats by depriving ecosystems of adequate fresh water and fragmenting communities when streams go dry. Biochemical reactions in shallow groundwater can remove anthropogenically elevated nitrogen compounds and reduce—but only to a point—the greening of waterways and shorelines with periphyton and harmful algal blooms. Groundwater extraction for beneficial use is increasingly limited by water-quality constraints imposed by naturally occurring and introduced substances. Overdrafting can cause land-surface subsidence, damaging buildings and roads and disrupting canals, sewers, and other gravity-flow conveyances. Increases in groundwater levels can cause soil salinization in dry regions and erosive sapping and flooding in wet regions. Coastal saltwater intrusion, groundwater flooding, salinization associated with groundwater-irrigated agriculture, induced seismicity from injected wastes, and the detrimental impacts of groundwater depletion are among the major environmental challenges of our time.

Book chapter↗
USGS2004

Analysis of MASTER thermal data in the Greeley area of the Front Range Urban Corridor, Colorado — Delineation of sites for infrastructure resource characterization

Sand and soils southwest of Greeley, Colorado, were characterized for mineral composition and industrial quality. Radi-ance data from the thermal channels of the MASTER simulator were calibrated using estimated atmospheric parameters. Chan-nel emissivities were approximated using an estimated ground temperature. Subsequently, a decorrelation algorithm was used to calculate inverse wave emissivity images. Six soil classes, one vegetation class, water, and several small classes were defined using an unsupervised classification algorithm. Ground covered by each of the derived emissivity spectral classes was studied using color-infrared air photos, color-infrared composite MAS-TER data, geologic maps, NASA/JPL Airborne Visible and Infra-red Imaging Spectrometer (AVIRIS) data, and field examination. Spectral classes were characterized by their responses and related to their mineral content through field examination. Classes with a minimum at channel 44, and having a similar spectral shape to quartz, field checked as containing abundant quartz. Classes with a minimum at channel 45, and having a spectral shape similar to the sheet minerals, were found in the field to contain abundant mica and clay. Sandy soil was found to have a positive slope at the longer wavelengths; the more clay rich soils had a negative slope. Spectra with a strong downturn at channel 50 generally indicated low vegetation cover, whereas an upturn indicated more vegetation cover. Mapping revealed a range of classified soils with varying amounts of quartz, silt, clay, and plant humus. Sand and gravel operations along the St. Vrain River, gravel lots, and some fields spectrally classified as quartz-rich sands were confirmed through field examination. Other fields mapped as sandy soils, ranging from quartz-rich sandy soil to quartz-rich silt-sand soil with clay. Flood plains mapped as sandy-silty-organic-rich clay. The city of Greeley contained all classes of materials, with the sand classes mapping as various types of asphalt. Abundant quartz gravel was apparent within the asphalt during field check-ing. The clay classes mapped silt-clay soils in areas of irrigated grass landscaping, some fields, and roofing materials.

Colorado↗
USGS2006

Geologic map of the Kings Mountain and Grover quadrangles, Cleveland and Gaston Counties, North Carolina, and Cherokee and York Counties, South Carolina

This geologic map of the Kings Mountain and Grover 7.5-minute quadrangles, N.C.-S.C., straddles a regional geological boundary between the Inner Piedmont and Carolina terranes. The Kings Mountain sequence (informal name) on the western flank of the Carolina terrane in this area includes the Neoproterozoic Battleground and Blacksburg Formations. The Battleground Formation has a lower part consisting of metavolcanic rocks and interlayered schist, and an upper part consisting of quartz-sericite phyllite and schist interlayered with quartz-pebble metaconglomerate, aluminous quartzite, micaceous quartzite, manganiferous rock, and metavolcanic rocks. The Blacksburg Formation consists of phyllitic metasiltstone interlayered with thinner units of marble, laminated micaceous quartzite, hornblende gneiss, and amphibolite. Layered metamorphic rocks of the Inner Piedmont terrane include muscovite-biotite gneiss, muscovite schist, and amphibolite. The Kings Mountain sequence has been intruded by metatonalite and metatrondhjemite (Neoproterozoic), metadiorite and metagabbro (Paleozoic), and High Shoals Granite (Pennsylvanian). Layered metamorphic rocks of the Inner Piedmont in this area have been intruded by Toluca Granite (Ordovician?), Cherryville Granite and associated pegmatite (Mississippian), and spodumene pegmatite (Mississippian). Diabase dikes (early Jurassic) are locally present throughout the area. Ductile fault zones of regional scale include the Kings Mountain and Kings Creek shear zones. In this area, the Kings Mountain shear zone forms the boundary between the Inner Piedmont and Carolina terranes, and the Kings Creek shear zone separates the Battleground Formation from the Blacksburg Formation. Structural styles change across the Kings Mountain shear zone from steeply-dipping layers, foliations, and folds on the southeast to gently- and moderately-dipping layers, foliations, and recumbent folds on the northwest. Mineral assemblages in the Kings Mountain sequence show a westward decrease from upper amphibolite facies (sillimanite zone) near the High Shoals Granite on the east side of the map to greenschist (epidote-amphibolite) facies in the south-central part of the area near the Kings Mountain shear zone. Amphibolite-facies mineral assemblages in the Inner Piedmont terrane increase in grade from the kyanite zone near the Kings Mountain shear zone to the sillimanite zone in the northwest part of the map. Surficial deposits include alluvium in the stream valleys and colluvium along ridges and steep slopes. These quadrangles are unusual in their richness and variety of mineral deposits, which include spodumene (lithium), cassiterite (tin), mica, feldspar, silica, clay, marble, kyanite and sillimanite, barite, manganese, sand and gravel, gold, pyrite, and iron. (Abstract from pamphlet.)

Open-File Report↗
USGS1970

Test of airborne fluorometer over land surfaces and geologic materials

Response of an experimental Fraunhofer line discriminator(FLD) to a wide range of surficial deposits common in deserts and semideserts was tested in the laboratory and from an 1-1-19 helicopter. By design the instrument sensed radiation from the ground specifically at the sodium D2 Fraunhofer line (5890 angstroms). It is capable of detecting a fluorescence component emanating from ground targets irradiated by sunlight along the line of flight, provided the aircraft is nearly level. However, no signals attributable to fluorescence were recorded during 540 miles of aerial traverses over southeastern California and west-central Arizona. It is concluded that exposed surfaces of target materials throughout the traverses were either non-luminescent at 5890 A or not sufficiently so to be detectable. It cannot be ruled out that the lack of fluorescence is partly attributable to surficial coatings of non-luminescent weathered material. The principal route surveyed from the air was from Needles, California to Furnace Creek Ranch, Death Valley and return via the Amargosa River valley, Silurian Lake (dry), Silver Lake (dry), and Soda Lake (dry). Principal targets traversed were unconsolidated elastic sediments ranging from silty clay to cobbles, and a wide range of evaporite deposits. Evaporite minerals thought to have been viewed in high concentrations are halite (sodium chloride), gypsum (hydrous calcium sulfate), probably other sulfate minerals, borax and probably ulexite (hydrous sodium borates), possibly colemanite (hydrous calcium borate), and probably some carbonate minerals. Extensive manganese-rich outcrops midway between Needles and Prescott had to be by-passed because of low sun-angles, cloudiness, and a heavy load in relation to altitude (above 5,000 feet). Several of the more common evaporite minerals were tested under the FLD on the ground, while being irradiated by bright sunlight. Minerals tested were chiefly from salt fiats (salars) in the Atacama Desert of northern Chile, and included halite, gypsum, ulexite, thenardite (sodium sulfate), aragonite (calcium carbonate) and nitrate ore containing soda niter (sodium nitrate). Crude oil from the Santa Barbara leak was tested in its natural state and in solutions of methyl-isobutyl-ketone (MIBK). Petroliferous sandstone samples containing both high and moderate concentrations of oil were tested on both fresh and weathered surfaces. No response definitely attributable to fluorescence at 5890 A was noted from any of the foregoing geologic materials, although a possible very weak response to one oil sample in MBK solution appears on the record. Although no fluorescence was detected, the mechanical operation of the FLD was satisfactory throughout 8 hours of flight, with attendant vibrations, and during a wide range of sun angles, from 13° to 33°. In accord with design, the FLD showed no appreciable response to moderate contrasts in reflectivity among targets, although there was a marked response to strong contrasts in reflectivity. Airborne tests also established that a minimum instrumental warm-up time of seven minutes is required, and that response is not entirely independent of either the vertical angle (tilt) or horizontal angle (flight direction) of the aircraft.

Open-File Report↗
USGS2000

Hydrogeologic setting and potential for denitrification in ground water, Coastal Plain of southern Maryland

The types and distribution of Coastal Plain sediments in the Patuxent River Basin may contribute to relatively low concentrations of nitrate (typically less than 1 milligram per liter) in stream base flow because of the chemical reduction of dissolved nitrate (denitrification) in ground water. Water chemistry data from synoptic stream base-flow surveys in the Patuxent River Basin show higher dissolved nitrate concentrations in the Piedmont than in the Coastal Plain section of the watershed. Stream base flow reflects closely the chemistry of ground water discharging from the surficial (unconfined) aquifer to the stream. Because land use in the sampled subbasins is virtually the same in each section, differences in the physical and geochemical characteristics of the surficial aquifer may explain the observed differences in water chemistry. One possible cause of lower nitrate concentrations in the Coastal Plain is denitrification within marine sediments that contain chemically reduced compounds. During denitrification, the oxygen atoms on the nitrate (N0 3 -) molecule are transferred to a reduced compound and N gas is produced. Organic carbon and ferrous iron (Fe 2+ ), derived from the dissolution of minerals such as pyrite (FeS 2 ) and glauconite (an iron aluminosilicate clay), can act as reducing substrates; these reduced chemical species are common in the marine and estuarine deposits in Southern Maryland. The spatial distribution of geologic units and their lithology (sediment type) has been used to create a map of the potential for denitrification of ground water in the surficial aquifer of the Coastal Plain in Southern Maryland.

Maryland↗
USGS2005

Reservoir controling factors in the Karaha-Telaga Bodas geothermal field, Indonesia

Karaha - Telaga Bodas geothermal system consists of: 1) a caprock, ranging from several hundred meters to 1600 m thick that is characterized by steep, conductive temperature gradients and low permeabilities; 2) an underlying vapor-dominated zone that extends below sea level; and 3) a deep liquid-dominated zone with measured temperatures up to 353??C. Heat is provided by a 3 km deep tabular granodiorite stock. The effective base of the reservoir is controlled by the stress regime's effect on fractures within volcanic rocks located above the brittle/ductile deformation boundary. The base of the caprock is controlled by the distribution of initially low-permeability lithologies above the reservoir; the extent of pervasive clay alteration that has reduced initial permeabilities; the distribution of secondary minerals deposited by descending waters; and by a downward change from a strike-slip to an extensional stress regime. Producing zones are controlled by both matrix and fracture permeabilities.

Conference Paper↗
USGS2006

State summaries: Illinois

According to the United States Geological Survey (USGS), Illinois ranked third in the amount of crushed stone produced from underground mining operations. In 2004, Illinois produced more than 76.5 Mt of crushed stone and 38.7 Mt of sand-and-gravel. Preliminary data for 2005 showed an increase in the production of crushed stone and a slight decrease in the production of sand-and-gravel. The state remained 16th in total value of nonfuel mineral production. In decreasing order of value, the minerals produced included crushed stone, cement, construction sand and gravel, lime, clay, peat, tripoli, industrial sand, crushed sandstone and gemstone.

Mining Engineering↗
USGS2007

Differentiating pedogenesis from diagenesis in early terrestrial paleoweathering surfaces formed on granitic composition parent materials

Unconformable surfaces separating Precambrian crystalline basement and overlying Proterozoic to Cambrian sedimentary rocks provide an exceptional opportunity to examine the role of primitive soil ecosystems in weathering and resultant formation of saprolite (weathered rock retaining rock structure) and regolith (weathered rock without rock structure), but many appear to have been affected by burial diagenesis and hydrothermal fluid flow, leading some researchers to discount their suitability for such studies. We examine one modern weathering profile (Cecil series), four Cambrian paleoweathering profiles from the North American craton (Squaw Creek, Franklin Mountains, Core SQ-8, and Core 4), one Neoproterozoic profile (Sheigra), and one late Paleoproterozoic profile (Baraboo), to test the hypothesis that these paleoweathering profiles do provide evidence of primitive terrestrial weathering despite their diagenetic and hydrothermal overprinting, especially additions of potassium. We employ an integrated approach using (1) detailed thin-section investigations to identify characteristic pedogenic features associated with saprolitization and formation of well-drained regoliths, (2) electron microprobe analysis to identify specific weathered and new mineral phases, and (3) geochemical mass balance techniques to characterize volume changes during weathering and elemental gains and losses of major and minor elements relative to the inferred parent materials. There is strong pedogenic evidence of paleoweathering, such as clay illuviation, sepic-plasmic fabrics, redoximorphic features, and dissolution and alteration of feldspars and mafic minerals to kaolinite, gibbsite, and Fe oxides, as well as geochemical evidence, such as whole-rock losses of Na, Ca, Mg, Si, Sr, Fe, and Mn greater than in modern profiles. Evidence of diagenesis includes net additions of K, Ba, and Rb determined through geochemical mass balance, K-feldspar overgrowths in overlying sandstone sections, and K-feldspars with reaction rims in weathered basement. The sub-Cambrian paleoweathering profiles formed on granite are remarkably similar to modern weathering profiles formed on granite, in spite of overprinting by potassium diagenesis. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗
USGS1955

Uranium minerals in Oligocene gypsum near Chadron, Dawes County, Nebraska

Carnotite, sabugalite [HAI(UO 2 ) 4 (PO 4 ) 4 • 16H 2 O] and autunite occur in the basal 25 feet of a 270-foot sequence of nonmarine bedded gypsum and gypsiferous clay in the Brule formation of Oligocene age about 12 miles northeast of Chadron in northeastern Dawes County, Nebraska. Uranium minerals are visible at only two localities and are associated with carbonaceous matter. Elsewhere the basal 25 feet of the gypsum sequence is interbedded with carbonate rocks and is weakly but persistently uraniferous. Uranium probably was emplaced from above by uranyl solutions rich in sulfate.

Nebraska↗
USGS2004

Biogeochemical transformation of Fe minerals in a petroleum-contaminated aquifer

The Bemidji aquifer in Minnesota, USA is a well-studied site of subsurface petroleum contamination. The site contains an anoxic groundwater plume where soluble petroleum constituents serve as an energy source for a region of methanogenesis near the source and bacterial Fe(III) reduction further down gradient. Methanogenesis apparently begins when bioavailable Fe(III) is exhausted within the sediment. Past studies indicate that Geobacter species and Geothrix fermentens -like organisms are the primary dissimilatory Fe-reducing bacteria at this site. The Fe mineralogy of the pristine aquifer sediments and samples from the methanogenic (source) and Fe(III) reducing zones were characterized in this study to identify microbiologic changes to Fe valence and mineral distribution, and to identify whether new biogenic mineral phases had formed. Methods applied included X-ray diffraction; X-ray fluorescence (XRF); and chemical extraction; optical, transmission, and scanning electron microscopy; and Mössbauer spectroscopy. All of the sediments were low in total Fe content (≈ 1%) and exhibited complex Fe-mineralogy. The bulk pristine sediment and its sand, silt, and clay-sized fractions were studied in detail. The pristine sediments contained Fe(II) and Fe(III) mineral phases. Ferrous iron represented approximately 50% of Fe TOT . The relative Fe(II) concentration increased in the sand fraction, and its primary mineralogic residence was clinochlore with minor concentrations found as a ferroan calcite grain cement in carbonate lithic fragments. Fe(III) existed in silicates (epidote, clinochlore, muscovite) and Fe(III) oxides of detrital and authigenic origin. The detrital Fe(III) oxides included hematite and goethite in the form of mm-sized nodular concretions and smaller-sized dispersed crystallites, and euhedral magnetite grains. Authigenic Fe(III) oxides increased in concentration with decreasing particle size through the silt and clay fraction. Chemical extraction and Mössbauer analysis indicated that this was a ferrihydrite like-phase. Quantitative mineralogic and Fe(II/III) ratio comparisons between the pristine and contaminated sediments were not possible because of textural differences. However, comparisons between the texturally-similar source (where bioavailable Fe(III) had been exhausted) and Fe(III) reducing zone sediments (where bioavailable Fe(III) remained) indicated that dispersed detrital, crystalline Fe(III) oxides and a portion of the authigenic, poorly crystalline Fe(III) oxide fraction had been depleted from the source zone sediment by microbiologic activity. Little or no effect of microbiologic activity was observed on silicate Fe(III). The presence of residual “ferrihydrite” in the most bioreduced, anoxic plume sediment (source) implied that a portion of the authigenic Fe(III) oxides were biologically inaccessible in weathered, lithic fragment interiors. Little evidence was found for the modern biogenesis of authigenic ferrous-containing mineral phases, perhaps with the exception of thin siderite or ferroan calcite surface precipitates on carbonate lithic fragments within source zone sediments.

Geochimica et Cosmochimica Acta↗
USGS2023

New high resolution airborne geophysical surveys in Nevada And California for geothermal and mineral resource studies

The U.S. Geological Survey (USGS) and the Department of Energy (DOE) are collaborating to acquire high-resolution airborne magnetic and radiometric data to support geologic and geophysical mapping and modeling that will assist geothermal and critical mineral studies. Coordinated with these efforts are programs supporting geologic mapping and airborne LiDAR (light detection and ranging) surveys that yield detailed surface topographic models of the terrain over the same regions spanned by the geophysical surveys. The collaboration leverages resources from the USGS and DOE to acquire large regional datasets that will provide fundamental data necessary to map surface and subsurface geology and structure to benefit mineral and resource program objectives of both agencies. Such regionally uniform datasets are important for geothermal research to assist in identifying geologically favorable settings and as invaluable inputs in predictive models targeting undiscovered resources that use knowledge-driven (e.g., play fairway analysis) or data-driven approaches (e.g., machine-learning methods) to reduce risk associated with resource exploration. These data will also serve a wide range of other related activities from hazard (earthquake, volcano, landslide, environmental) and resource (water, mineral, energy) studies, to mapping and land management. Surveys were conducted in two areas that were selected because they host substantial geothermal and mineral potential in California and Nevada. The data will aid several ongoing USGS and DOE projects aimed at characterizing geothermal and mineral systems, understanding the factors controlling their occurrence, and improving future national resource assessments. The first of these surveys (referred to as GeoDAWN) was collected over northern and western Nevada and eastern California and spans areas of major resource potential associated with the Walker Lane and western Great Basin. This includes Clayton Valley, which hosts substantial lithium brine and clay resources, and the Humboldt Mafic Complex, which constitutes a potentially important resource of critical minerals (including cobalt, rare earth elements, platinum group elements, iron, chromium, nickel, and copper). The second survey area (referred to as GeoFlight) is focused over the Salton Trough in southern California that contains some of the largest and hottest known hydrothermal systems in the world, as well as a substantial lithium brine resource that could potentially meet the nation’s lithium demand for electric vehicles. Data from both surveys will be made publicly available through USGS publications and online data repositories. Future efforts under this collaboration are presently being evaluated and may involve acquisition of other data sets such as airborne gravity, electromagnetic or hyperspectral data to address research targets.

Conference Paper↗
USGS1994

Permeability-porosity relationships in sedimentary rocks

In many consolidated sandstone and carbonate formations, plots of core data show that the logarithm of permeability (k) is often linearly proportional to porosity (??). The slope, intercept, and degree of scatter of these log(k)-?? trends vary from formation to formation, and these variations are attributed to differences in initial grain size and sorting, diagenetic history, and compaction history. In unconsolidated sands, better sorting systematically increases both permeability and porosity. In sands and sandstones, an increase in gravel and coarse grain size content causes k to increase even while decreasing ??. Diagenetic minerals in the pore space of sandstones, such as cement and some clay types, tend to decrease log(k) proportionately as ?? decreases. Models to predict permeability from porosity and other measurable rock parameters fall into three classes based on either grain, surface area, or pore dimension considerations. (Models that directly incorporate well log measurements but have no particular theoretical underpinnings from a fourth class.) Grain-based models show permeability proportional to the square of grain size times porosity raised to (roughly) the fifth power, with grain sorting as an additional parameter. Surface-area models show permeability proportional to the inverse square of pore surface area times porosity raised to (roughly) the fourth power; measures of surface area include irreducible water saturation and nuclear magnetic resonance. Pore-dimension models show permeability proportional to the square of a pore dimension times porosity raised to a power of (roughly) two and produce curves of constant pore size that transgress the linear data trends on a log(k)-?? plot. The pore dimension is obtained from mercury injection measurements and is interpreted as the pore opening size of some interconnected fraction of the pore system. The linear log(k)-?? data trends cut the curves of constant pore size from the pore-dimension models, which shows that porosity reduction is always accompanied by a reduction in characteristic pore size. The high powers of porosity of the grain-based and surface-area models are required to compensate for the inclusion of the small end of the pore size spectrum.

Log Analyst↗
USGS1977

Chemical dissolution of sulfide minerals

Chemical dissolution treatments involving the use of aqua regia, 4 N HNO 3 , H 2 O 2 -ascorbic acid, oxalic acid, KClO 3 +HCl, and KClO 3 +HCl followed by 4 N HNO 3 were applied to specimens of nine common sulfide minerals (galena, chalcopyrite, cinnabar, molybdenite, orpiment, pyrite, stibnite, sphalerite, and tetrahedrite) mixed individually with a clay loam soil. The resultant decrease in the total sulfur content of the mixture, as determined by using the Leco induction furnace, was used to evaluate the effectiveness of each chemical treatment. A combination of KClO 3 +HCl followed by 4 N HNO 3 boiling gently for 20 min has been shown to be very effective in dissolving all the sulfide minerals. This treatment is recommended to dissolve metals residing in sulfide minerals admixed with secondary weathering products, as one step in a fractionation scheme whereby metals in soluble and adsorbed forms, and those associated with organic materials and secondary oxides, are first removed by other chemical extractants.

Journal of Research of the U.S. Geological Survey↗
USGS1999

Lanthanide, yttrium, and zirconium anomalies in the Fire Clay coal bed, Eastern Kentucky

The Fire Clay coal bed in the Central Appalachian basin region contains a laterally-persistent tonstein that is found in the coal throughout most of its areal extent. The tonstein contains an array of minerals, including sanidine, ??-quartz, anatase and euhedral zircon, thhat constitutes strong evidence for a volcanic origin of the parting. For this study, five samples of the tonstein and four sets of coal samples underlying the tonstein were collected from five sites in eastern Kentucky. Inductively coupled plasma-mass spectroscopy (ICP-MS) analysis of the tonstein and underlying coal collected from four sites in eastern Kentucky show that although Zr concentrations are high in the tonstein (570-1820 ppm on a coal-ash basis (cab)), they are highest in the coal directly underlying the tonstein (2870-4540 ppm (cab)). A similar enrichment pattern is observed in the concentration of Y plus the sum of the rare earth elements (Y + ??REE): total Y + ??REE concentrations in the five tonstein samples range from 511 to 565 ppm (cab). However, Y + ??REE contents are highest in the coals directly underlying the tonsteins: values range from 1965 to 4198 ppm (cab). Scanning electron microscopy of samples from coal which directly underlies two of the tonstein samples show that REE-rich phosphate, tentatively identified as monazite, commonly infills cracks in clays and cells in clarain and vitrain. Zircon is rare and commonly subhedral. On the basis of coal chemistry and grain morphology, we suggest that volcanic components in the tonstein were leached by ground water. The leachate, rich in Y and REE precipitated as authigenic mineral phases in the underlying coal.The Fire Clay coal bed in the Central Appalachian basin region contains a laterally-persistent tonstein that is found in the coal throughout most of its areal extent. The tonstein contains an array of minerals, including sanidine, ??-quartz, anatase and euhedral zircon, that constitutes strong evidence for a volcanic origin of the parting. For this study, five samples of the tonstein and four sets of coal samples underlying the tonstein were collected from five sites in eastern Kentucky. Inductively coupled plasma-mass spectroscopy (ICP-MS) analysis of the tonstein and underlying coal collected from four sites in eastern Kentucky show that although Zr concentrations are high in the tonstein (570-1820 ppm on a coal-ash basis (cab)), they are highest in the coal directly underlying the tonstein (2870-4540 ppm (cab)). A similar enrichment pattern is observed in the concentration of Y plus the sum of the rare earth elements (Y+???REE): total Y+???REE concentrations in the five tonstein samples range from 511 to 565 ppm (cab). However, Y+???REE contents are highest in the coals directly underlying the tonsteins: values range from 1965 to 4198 ppm (cab). Scanning electron microscopy of samples from coal which directly underlies two of the tonstein samples show that REE-rich phosphate, tentatively identified as monazite, commonly infills cracks in clays and cells in clarain and vitrain. Zircon is rare and commonly subhedral. On the basis of coal chemistry and grain morphology, we suggest that volcanic components in the tonstein were leached by ground water. The leachate, rich in Y and REE precipitated as authigenic mineral phases in the underlying coal.

International Journal of Coal Geology↗
USGS1964

Exploration for mineral deposits in White County, Georgia

White County is in the Northeast Georgia Highland. It comprises 243 square miles and has abouit 7,000 Inhabitants. The county seat is Cleveland. Although the scene of considerable mining activity in the past, White County now has few operating mines: a small production of clay 1 for the manufacture of miscellaneous potter near Cleveland, and three sand-gravel operations 2 at Helen. Minerals are one of White County's three basic resources, and the one whose development has been most neglected. This special study has been undertaken to expand mineral production, increase employment and create new economic opportunities in White County and adjacent areas.

Georgia↗
USGS1991

Text to accompany slides/photographs of Lower Cretaceous pollen and spores in sediments from the Muirkirk clay pit (Prince Georges County, MD)

The pollen and spores found in clay beds at the Muirkirk clay pit are those of ferns and lycopods, seed ferns, shrubby conifers, bald cypress-type conifers, and tree-sized conifers. Some of the ferns and conifers have modern representatives which help interpret the vegetation of this site that bears Early Cretaceous dinosaur fossils. The plants, as well as the presence of algae, fungi, and mineral remains of bacteria, show that the site was once a wetland that developed on the clay floor of a waning oxbow lake.

Maryl↗