SEARCH · Geology Reports

Results for “Surface Water Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS2008

Chapter A6. Section 6.4. pH

Measurement of pH is critical to the understanding of the viability and vulnerability of environmental waters and is considered a master variable in determining the aqueous geochemistry of an aqueous system. pH is a measure that represents the hydrogen-ion concentration (activity) of a solution. This section of the National Field Manual (NFM) describes U.S. Geological Survey (USGS) guidance and protocols for measurement of pH in ground and surface waters. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.'

Techniques of Water-Resources Investigations↗

USGS2000

Seasonal estimates of riparian evapotranspiration using remote and in situ measurements

In many semi-arid basins during extended periods when surface snowmelt or storm runoff is absent, groundwater constitutes the primary water source for human habitation, agriculture and riparian ecosystems. Utilizing regional groundwater models in the management of these water resources requires accurate estimates of basin boundary conditions. A critical groundwater boundary condition that is closely coupled to atmospheric processes and is typically known with little certainty is seasonal riparian evapotranspiration ET). This quantity can often be a significant factor in the basin water balance in semi-arid regions yet is very difficult to estimate over a large area. Better understanding and quantification of seasonal, large-area riparian ET is a primary objective of the Semi-Arid Land-Surface-Atmosphere (SALSA) Program. To address this objective, a series of interdisciplinary experimental Campaigns were conducted in 1997 in the San Pedro Basin in southeastern Arizona. The riparian system in this basin is primarily made up of three vegetation communities: mesquite (Prosopis velutina), sacaton grasses (Sporobolus wrightii), and a cottonwood (Populus fremontii)/willow (Salix goodingii) forest gallery. Micrometeorological measurement techniques were used to estimate ET from the mesquite and grasses. These techniques could not be utilized to estimate fluxes from the cottonwood/willow (C/W) forest gallery due to the height (20-30 m) and non-uniform linear nature of the forest gallery. Short-term (2-4 days) sap flux measurements were made to estimate canopy transpiration over several periods of the riparian growing season. Simultaneous remote sensing measurements were used to spatially extrapolate tree and stand measurements. Scaled C/W stand level sap flux estimates were utilized to calibrate a Penman-Monteith model to enable temporal extrapolation between Synoptic measurement periods. With this model and set of measurements, seasonal riparian vegetation water use estimates for the riparian corridor were obtained. To validate these models, a 90-day pre-monsoon water balance over a 10 km section of the river was carried out. All components of the water balance, including riparian ET, were independently estimated. The closure of the water balance was roughly 5% of total inflows. The ET models were then used to provide riparian ET estimates over the entire corridor for the growing season. These estimates were approximately 14% less than those obtained from the most recent groundwater model of the basin for a comparable river reach.

Conference Paper↗

USGS2022

Sclerochronological records of environmental variability and bivalve growth in the Pacific Arctic

The Pacific Arctic region has experienced, and is projected to continue experiencing, rapid climate change. Large uncertainties exist in our understanding of the impact these physical changes have on the region’s ecology. This is, in part, due to the lack of long-term data. Here we investigate bivalve mollusc growth increment width chronologies (sclerochronologies) to develop a long-term biological data series in an Arctic species and address the hypothesis that benthic production in the Pacific Arctic region is in decline with implications for predators (e.g., walrus, whales, seals, and sea ducks). Growth increments formed in the shells of two bivalve mollusc species, Astarte borealis and Liocyma fluctuosa, were examined using conventional sclerochronological techniques. The A. borealis and L. fluctuosa samples exhibited measured longevities of >148 and >18 years, respectively, in the coastal waters of Alaska’s Chukchi Sea. Dendrochronology crossdating techniques facilitated the development of two robust (expressed population signal >0.85) independent growth increment width chronologies. These chronologies provide evidence of the growth conditions through time for each species (1985-2015 for A. borealis and 1997-2014 for L. fluctuosa) . Linear regression analyses identified that both species grew more rapidly in years with warmer sea surface temperature and lower sea ice concentration. The results provide evidence that benthic ecosystems are benefiting from the warmer conditions and reduced sea ice that have accompanied recent Arctic climate trends. This result is encouraging for benthic predators in the eastern Chukchi Sea as it alleviates the concern that their benthic prey has already become food limited by weakened pelagic-benthic coupling. More broadly, this initial A. borealis chronology is among the longest biological data series for any Arctic species and highlights the feasibility of multicentennial biological data for the Arctic.

Progress in Oceanography↗

USGS2017

Simulation of groundwater flow and pumping scenarios for 1900–2050 near Mount Pleasant, South Carolina

Groundwater withdrawals from the Upper Cretaceous-age Middendorf aquifer in South Carolina have created a large, regional cone of depression in the potentiometric surface of the Middendorf aquifer in Charleston and Berkeley Counties, South Carolina. Groundwater-level declines of as much as 249 feet have been observed in wells over the past 125 years and are a result of groundwater use for public water supply, irrigation, and private industry. To address the concerns of users of the Middendorf aquifer, the U.S. Geological Survey, in cooperation with Mount Pleasant Waterworks (MPW), recalibrated an existing groundwater-flow model to incorporate additional groundwater-use and water-level data since 2008. This recalibration process consisted of a technique of parameter estimation that uses regularized inversion and employs “pilot points” for spatial hydraulic property characterization. The groundwater-flow system of the Coastal Plain physiographic province of South Carolina and parts of Georgia and North Carolina was simulated using the U.S. Geological Survey finite-difference computer code MODFLOW-2000. After the model recalibration, the following six predictive water-management scenarios were created to simulate potential changes in groundwater flow and groundwater-level conditions in the Mount Pleasant, South Carolina, area: Scenario 1—maximize MPW reverse-osmosis plant capacity by increasing groundwater withdrawals from the Middendorf aquifer from 3.9 million gallons per day (Mgal/d), which was the amount withdrawn in 2015, to 8.58 Mgal/d; Scenario 2—same as Scenario 1, but with the addition of a 0.5 Mgal/d supply well in the Middendorf aquifer near Moncks Corner, South Carolina; Scenario 3—same as Scenario 1, but with the addition of a 1.5 Mgal/d supply well in the Middendorf aquifer near Moncks Corner, South Carolina; Scenario 4—maximize MPW well capacity by increasing withdrawals from the Middendorf aquifer from 3.9 Mgal/d (in 2015) to 10.16 Mgal/d; Scenario 5—minimize MPW surface-water purchase from the Charleston Water System by adding supply wells and increasing withdrawals from the Middendorf aquifer from 3.9 Mgal/d (in 2015) to 12.16 Mgal/d; and Scenario 6—same as Scenario 1, but with he addition of quarterly model stress periods to simulate seasonal variations in the groundwater withdrawals. Results from the simulations indicated further decline of groundwater levels creating cones of depressions near pumping wells in the Middendorf aquifer in the Mount Pleasant, South Carolina, area between 2015 and 2050 for all six scenarios. Simulation results from Scenario 1 showed an average decline of about 150 feet in the groundwater levels of the MPW production wells. Simulated hydrographs for two area observation wells illustrate the gradual decline in groundwater levels with overall changes in water-level altitudes of –92 and –33 feet, respectively. Simulated groundwater altitudes at a hypothetical observation well located in the MPW well field declined 121 feet between 2015 and 2050. Scenarios 2 and 3 have the same pumping rates as Scenario 1 for the MPW production wells; however, a single hypothetical pumping well was added in the Middendorf aquifer near the town of Moncks Corner, South Carolina. This hypothetical pumping well has a withdrawal rate of 0.5 Mgal/d for Scenario 2 and 1.5 Mgal/d for Scenario 3. A comparison to the 2050 Scenario 1 simulation indicates groundwater altitudes for Scenarios 2 and Scenario 3 are 3 feet and 8 feet lower, respectively, at the MPW production wells. Scenario 4 simulates the maximum pumping capacity of 10.16 Mgal/d for the MPW network of production wells. Simulated 2050 groundwater altitudes for this simulation declined to –359 feet. Simulated hydrographs for two observation wells show groundwater-level declines of 116 and 41 feet, respectively. Simulated differences in groundwater altitudes at a hypothetical observation well located in the MPW well field indicate a water-level decline of 164 feet between 2015 and 2050. Scenario 5 is a modification of Scenario 4 with the addition of two new MPW production wells. For this scenario, the MPW network of production wells were simulated the same as in Scenario 4, but withdrawals from the two new production wells were added in 2020. Simulated 2050 groundwater altitudes for this simulation declined to – 405 feet. Simulated hydrographs for two observation wells show groundwater-level declines of 143 and 51 feet, respectively. Simulated groundwater altitudes at a hypothetical observation well located in the MPW well field declined 199 feet between 2015 and 2050. Scenario 6 is a modification of Scenario 1, in which 140 additional quarterly stress periods were added to simulate MPW seasonal demands. Simulated groundwater altitudes for Scenario 6 declined to –353 feet during 2050. For Scenario 6, simulated hydrographs for two observation wells and the hypothetical observation well show similar groundwater-level declines as seen in Scenario 1, but with seasonal fluctuations of as much as 56 feet in the hypothetical observation well. Water budgets for the model area immediately surrounding Mount Pleasant, South Carolina, were calculated for 2015 and for 2050. The water budget for 2015 is equal for all of the scenarios because it represents the year prior to the hypothetical pumping beginning in 2016. The largest flow component in the 2015 water budget for the Mount Pleasant area is discharge to wells at a rate of 4.17 Mgal/d. Additionally, 0.23 Mgal/d flows laterally out of the Middendorf aquifer in this area of the model due to the regional horizontal hydraulic gradient. Flow into this zone consists predominantly of lateral flow within the Middendorf aquifer at 4.08 Mgal/d. Additionally, 0.02 Mgal/d is released into this zone from aquifer storage. Vertically, 0.06 Mgal/d flows down from the Middendorf confining unit located above the Middendorf aquifer, and 0.25 Mgal/d flows up from the Cape Fear confining unit below. The largest flow component in the 2050 water budget for all six scenarios is discharge to wells in the Mount Pleasant area at rates between 8.89 and 12.47 Mgal/d. Flow into this zone consists mostly of lateral flow between 8.47 and 11.77 Mgal/d within the Middendorf aquifer. Between 0.003 and 0.46 Mgal/d is released into this zone from aquifer storage. Between 0.004 and 0.15 Mgal/d flows laterally out of this zone into adjacent areas of the Middendorf aquifer due to the regional horizontal hydraulic gradient. Finally, between 0.15 and 0.22 Mgal/d flows vertically into this zone from confining units above and below the Middendorf aquifer.

South Carolina↗

USGS2008

Chapter A6. Section 6.0. General information and guidelines for field-measured water-quality properties

This report summarizes information, guidelines, and minimum requirements that apply generally to the seven field-measurement sections that comprise the rest of Chapter A6 of this U.S. Geological Survey (USGS) National Field Manual for the Collection of Water-Quality Data (NFM). Protocols are specified for establishing and maintaining data records, use of field-measurement instruments and methods, and quality assurance of data-collection and reporting methods that are relevant to surface-water and ground-water field-measurement activities. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.'

Techniques of Water-Resources Investigations↗

USGS2025

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques↗

USGS2002

An evaluation of population index and estimation techniques for tadpoles in desert pools

Using visual (VI) and dip net indices (DI) and double-observer (DOE), removal (RE), and neutral red dye capture-recapture (CRE) estimates, we counted, estimated, and censused Couch's spadefoot ( Scaphiopus couchii ) and canyon treefrog ( Hyla arenicolor ) tadpole populations in Big Bend National Park, Texas. Initial dye experiments helped us determine appropriate dye concentrations and exposure times to use in mesocosm and field trials. The mesocosm study revealed higher tadpole detection rates, more accurate population estimates, and lower coefficients of variation among pools compared to those from the field study. In both mesocosm and field studies, CRE was the best method for estimating tadpole populations, followed by DOE and RE. In the field, RE, DI, and VI often underestimated populations in pools with higher tadpole numbers. DI improved with increased sampling. Larger pools supported larger tadpole populations, and tadpole detection rates in general decreased with increasing pool volume and surface area. Hence, pool size influenced bias in tadpole sampling. Across all techniques, tadpole detection rates differed among pools, indicating that sampling bias was inherent and techniques did not consistently sample the same proportion of tadpoles in each pool. Estimating bias (i.e., calculating detection rates) therefore was essential in assessing tadpole abundance. Unlike VI and DOE, DI, RE, and CRE could be used in turbid waters in which tadpoles are not visible. The tadpole population estimates we used accommodated differences in detection probabilities in simple desert pool environments but may not work in more complex habitats.

Journal of Herpetology↗

USGS1990

Application of a hollow-fiber, tangential-flow device for sampling suspended bacteria and particles from natural waters

The design and application of a hollow-fiber tangential-flow filtration device has been used to concentrate bacteria and suspended particles from large volume surface water and groundwater samples (i.e., hundreds of liters). Filtrate tlux rates (4–8 L min −1 ) are equal to or faster than those of other devices that are based on continuous flow centrifugation and plate and frame filtration. Particle recovery efficiencies for inorganic particles (approximately 90%) were similar to other dewatering devices, but microbial cell recoveries (30–90%) were greatly improved by this technique relative to other currently available methods. Although requirements for operation and maintenance of the device are minimal, its size, as with other dewatering devices, limits its applicability at remote sample sites. Nevertheless, it has proven useful for sample collection in studies involving microbial transport and analysis of particle-associated trace inorganic solutes.

Journal of Environmental Quality↗

USGS2010

Characteristics of sediment data and annual suspended-sediment loads and yields for selected lower Missouri River mainstem and tributary stations, 1976-2008

Suspended-sediment data from 18 selected surface-water monitoring stations in the lower Missouri River Basin downstream from Gavins Point Dam were used in the computation of annual suspended-sediment and suspended-sand loads for 1976 through 2008. Three methods of suspended-sediment load determination were utilized and these included the subdivision method, regression of instantaneous turbidity with suspended-sediment concentrations at selected stations, and regression techniques using the Load Estimator (LOADEST) software. Characteristics of the suspended-sediment and streamflow data collected at the 18 monitoring stations and the tabulated annual suspended-sediment and suspended-sand loads and yields are presented.

Data Series↗

USGS2007

Effects of sample isolation and handling on the recovery of purgeable organic compounds

This report compares the recovery of purgeable organic compounds (POCs) obtained by using a downhole isobaric sampler developed by the U.S. Geological Survey, a helical-rotor submersible pump, and a point source bailer to collect and isolate samples of ground water from three wells in Now York and New Jersey: the samples contained a total of 13 PCX's delectable at concentrations ranging from 0.5 μg/L to about 400 μg/L. This report also compares the effects of sample handling, specifically the differences in PCX concentration recovery when an isobaric sample container is filled at land surface vs. when it is filled downhole. and when samples art taken using a bailer with and without a bottom-emptying device. These case studies are used to quantify the possible effects of different sample-isolation find sample-handling techniques on POC recovery. The relative effectiveness of the three devices varied by site and by compound. Overall, the POC recoveries achieved by using the helical-rotor submersible pump and the downlink isobaric sampler were not significantly different at the 95 percent confidence, level. POC recovery obtained by using the point source bailer was 11 percent lower overall. The downhole isobaric sampler results exhibited smaller coefficients of variation than did the helical-rotor submersible pump or the point-source bailer results. However, the differences between the coefficients of variation of the downhole isobaric sampler and those of the helical-rotor submersible pump were not significant at the 95 percent confidence level. The nonsignificant smaller coefficient of variation of the downhole isobaric sampler apparently resulted from two fewer sample handling steps that exposed the sample water to ambient air. An independent experiment performed with a different downhole sampler at one of the wells used in this investigation produced a similar statistical result. Also, the POC recovery obtained by pouring sample water out the lop of a point source bailer into 40-mL vials was S percent lower than that obtained by filling vials from a bailer with a bottom-emptying device.

Ground Water Monitoring and Remediation↗

USGS2016

Removing sun glint from optical remote sensing images of shallow rivers

Sun glint is the specular reflection of light from the water surface, which often causes unusually bright pixel values that can dominate fluvial remote sensing imagery and obscure the water-leaving radiance signal of interest for mapping bathymetry, bottom type, or water column optical characteristics. Although sun glint is ubiquitous in fluvial remote sensing imagery, river-specific methods for removing sun glint are not yet available. We show that existing sun glint-removal methods developed for multispectral images of marine shallow water environments over-correct shallow portions of fluvial remote sensing imagery resulting in regions of unreliable data along channel margins. We build on existing marine glint-removal methods to develop a river-specific technique that removes sun glint from shallow areas of the channel without overcorrection by accounting for non-negligible water-leaving near-infrared radiance. This new sun glint-removal method can improve the accuracy of spectrally-based depth retrieval in cases where sun glint dominates the at-sensor radiance. For an example image of the gravel-bed Snake River, Wyoming, USA, observed-vs.-predicted R 2 values for depth retrieval improved from 0.66 to 0.76 following sun glint removal. The methodology presented here is straightforward to implement and could be incorporated into image processing workflows for multispectral images that include a near-infrared band.

Earth Surface Processes and Landforms↗

USGS1984

A simple model of a phreatic surface through an earth dam

A simple numerical model for estimating a phreatic surface in an earthen dam is presented. The numerical approach is based upon the Complex Variable Boundary Element Method (CVBEM). By expanding the CVBEM approximation geometric functions into a first order Taylor series, the unknown phreatic surface location geometrics can be approximated without iteration by solving a single matrix system. The developed technique provides for the numerical solution of the inverse problem of locating the phreatic surface coordinates. A comparison of results produced from this simple approach to results produced from a finite element analog and an iterative CVBEM analog for an example problem is presented.

Advances in Water Resources↗

USGS2010

An overview of marine biodiversity in United States waters

Marine biodiversity of the United States (U.S.) is extensively documented, but data assembled by the United States National Committee for the Census of Marine Life demonstrate that even the most complete taxonomic inventories are based on records scattered in space and time. The best-known taxa are those of commercial importance. Body size is directly correlated with knowledge of a species, and knowledge also diminishes with distance from shore and depth. Measures of biodiversity other than species diversity, such as ecosystem and genetic diversity, are poorly documented. Threats to marine biodiversity in the U.S. are the same as those for most of the world: overexploitation of living resources; reduced water quality; coastal development; shipping; invasive species; rising temperature and concentrations of carbon dioxide in the surface ocean, and other changes that may be consequences of global change, including shifting currents; increased number and size of hypoxic or anoxic areas; and increased number and duration of harmful algal blooms. More information must be obtained through field and laboratory research and monitoring that involve innovative sampling techniques (such as genetics and acoustics), but data that already exist must be made accessible. And all data must have a temporal component so trends can be identified. As data are compiled, techniques must be developed to make certain that scales are compatible, to combine and reconcile data collected for various purposes with disparate gear, and to automate taxonomic changes. Information on biotic and abiotic elements of the environment must be interactively linked. Impediments to assembling existing data and collecting new data on marine biodiversity include logistical problems as well as shortages in finances and taxonomic expertise.

Arctic Ocean, Atlantic Ocean, Pacific Ocean↗

USGS2002

Use of soil leachates to define the extent of brine-contaminated soils at the USGS petroleum environmental research site "B", Osage County, northeastern Oklahoma

Soils at an active oil production site with a history of surface releases of produced water were investigated to determine the chemical signature of salt contamination and the spatial distribution of soil salinity in relation to areas of obvious salt scarring. Grab samples of shallow soil (0-15 cm) and selected soil profiles to depths of 0.6 to 1.7 m were collected onsite and offsite using a 5-cm diameter stainless steel soil auger. Air dried and disaggregated soil from 15 cm intervals (100 g) was mixed with 100 ml of distilled-deionized water to dissolve readily soluble salts. After 24 hours the water was separated by centrifugation followed by filtration through a 0.45 micrometer membrane. Specific conductance was measured immediately. Dissolved chloride (Cl) and sulfate (SO4) were initially estimated with Cl titration strips and turbidimetric measurements respectively. More accurate measurements of dissolved Cl, SO4, and bromide (Br) were later performed by ion chromatography. Brine-contaminated soil was indicated by (1) unusually elevated Cl concentrations or relatively low ratios of conductance/Cl in aqueous leachates compared to leachates of uncontaminated soils, and (2) ratios of Cl/Br in leachates (250± 30) that fall within the range of Cl/Br ratios measured in local produced waters (220-320). Leachates of background soils from the area were characterized by low conductance (sandy soils) or dissolved solids dominated by sulfates (shaley soils). At the study site, the surface (0-15 cm) distribution of elevated soil salinity was largely confined to areas of obvious salt scarring. Within the area of salt scars, elevated salinity persisted to depths of refusal by manual augering. The technique will be applied to deeper samples obtained by mechanical augering or direct push techniques.

Oklahoma↗

USGS2011

Numerical simulation of groundwater flow for the Yakima River basin aquifer system, Washington

A regional, three-dimensional, transient numerical model of groundwater flow was constructed for the Yakima River basin aquifer system to better understand the groundwater-flow system and its relation to surface-water resources. The model described in this report can be used as a tool by water-management agencies and other stakeholders to quantitatively evaluate proposed alternative management strategies that consider the interrelation between groundwater availability and surface-water resources. The model was constructed using the U.S. Geological Survey finite-difference model MODFLOW. The model uses 1,000-foot grid cells that subdivide the model domain by 600 rows and 600 columns. Forty-eight hydrogeologic units in the model are included in 24 model layers. The Yakima River, all major tributaries, and major agricultural drains are included in the model as either drain cells or streamflow-routing cells. Recharge was estimated from previous work using physical process models. Groundwater pumpage specified in the model is derived from monthly pumpage values previously estimated from another component of this study. The pumpage values include estimates for wells with standby/reserve rights that are used in drought years. The model was calibrated to the transient conditions for October 1959 to September 2001. Calibration was completed by using traditional trial-and-error methods and automated parameter-estimation techniques. The model simulates the shape and slope of the water table that generally is consistent with mapped water levels. At well observation points, the average difference between simulated and measured hydraulic heads is -49 feet with a root-mean-square error divided by the total difference in water levels of 4 percent. Simulated river streamflow was compared to measured streamflow at seven sites. Annual differences between measured and simulated streamflow for the sites ranged from 1 to 9 percent. Calibrated model output includes a 42-year estimate of a monthly water budget for the aquifer system. Five applications (scenarios) of the model were completed to obtain a better understanding of the relation between pumpage and surface-water resources and groundwater levels. For the first three scenarios, the calibrated transient model was used to simulate conditions without: (1) pumpage from all hydrogeologic units, (2) pumpage from basalt hydrogeologic units, and (3) exempt-well pumpage. The simulation results indicated potential streamflow capture by the existing pumpage from 1960 through 2001. The quantity of streamflow capture generally was inversely related to the total quantity of pumpage eliminated in the model scenarios. For the fourth scenario, the model simulated 1994 through 2001 under existing conditions with additional pumpage estimated for pending groundwater applications. The differences between the calibrated model streamflow and this scenario indicated additional decreases in streamflow of 91 cubic feet per second in the model domain. Existing conditions representing 1994 through 2001 were projected through 2025 for the fifth scenario and indicated additional streamflow decreases of 38 cubic feet per second and groundwater-level declines.

Scientific Investigations Report↗

USGS2016

Identification and classification of very low frequency waves on a coral reef flat

Very low frequency (VLF, 0.001–0.005 Hz) waves are important drivers of flooding of low-lying coral reef-islands. In particular, VLF wave resonance is known to drive large wave runup and subsequent overwash. Using a 5 month data set of water levels and waves collected along a cross-reef transect on Roi-Namur Island in the Republic of the Marshall Islands, the observed VLF motions were categorized into four different classes: (1) resonant, (2) (nonresonant) standing, (3) progressive-growing, and (4) progressive-dissipative waves. Each VLF class is set by the reef flat water depth and, in the case of resonance, the incident-band offshore wave period. Using an improved method to identify VLF wave resonance, we find that VLF wave resonance caused prolonged (&sim;0.5–6.0 h), large-amplitude water surface oscillations at the inner reef flat ranging in wave height from 0.14 to 0.83 m. It was induced by relatively long-period, grouped, incident-band waves, and occurred under both storm and nonstorm conditions. Moreover, observed resonant VLF waves had nonlinear, bore-like wave shapes, which likely have a larger impact on the shoreline than regular, sinusoidal waveforms. As an alternative technique to the commonly used Fast Fourier Transformation, we propose the Hilbert-Huang Transformation that is more computationally expensive but can capture the wave shape more accurately. This research demonstrates that understanding VLF waves on reef flats is important for evaluating coastal flooding hazards.

Roi-Namur Island↗

USGS1984

PREDICTING GROUND-WATER DRAINAGE TO SURFACE MINES.

A two-dimensional, finite-difference numerical model is used to simulate the drainage of ground water into a surface coal mine. Graphs of dimensionless head as a function of dimensionless distance, and dimensionless seepage flux as a function of dimensionless time are developed from results of the numerical modeling. Changes in seepage flux and ground-water levels can be estimated from the dimensionless hydrographs, from knowledge of aquifer characteristics prior to mining, and by means of several 'simple-to-use' equations. The technique is an improvement on previous experimental, analytical, and other numerical solutions because drainage from the unsaturated zone also is considered. The procedure is applicable to a wide range of hydrogeologic settings, but is especially applicable to hydrogeologic conditions typically encountered in the coal strip-mining regions of Illinois.

Conference Paper↗

USGS1973

Fluorescent spectroscopy, a technique for characterizing surface films

A relationship is established between fluorescent spectra obtained by using a light path through the liquid solution and the fluorescent spectra obtained by a direct reading of surface reflection (remote sensing). A brief review of quantum fundamentals provides the necessary information to conclude that "see-through" and reflectance spectra are identical in wavelength response. Many floating films contain fluorescent materials; thus fluorescent spectroscopic techniques were used to obtain the fluorescent spectra of lube oil, crude oil, and lignosulfonie acid in an effort to detect, identify, and quantify these representative fluorescent materials in water solutions. For each material tested the emission maximum was established. The emission maximum was then held constant while the absorption spectrum was recorded and the absorption maximum established. The complete spectral curves are presented.

Journal of Research of the U.S. Geological Survey↗