SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25Linked to original sources

USGS2006

Attention turns to naturally occurring methane seepage

Methane is the most abundant organic compound in the Earth's atmosphere. As a powerful greenhouse gas, it has implications for global climate change. Sources of methane to the atmosphere are varied. Depending on the source, methane can contain either modern or ancient carbon. Methane exiting from swamps and wetlands contains modern carbon, whereas methane leaking from petroleum reservoirs contains ancient carbon. The total annual source of methane to the atmosphere has been constrained to about 540 teragrams (Tg) per year “ Cicerone and Oremland , 1988”. Notably absent from any identified sources is the contribution of geologically sourced methane from naturally occurring seepage.

Eos, Earth and Space Science News↗

USGS2016

Spatial and temporal assessment of back-barrier erosion on Cumberland Island National Seashore, Georgia, 2011–2013

Much research has been conducted to better understand erosion and accretion processes for the seaward zones of coastal barrier islands; however, at Cumberland Island National Seashore, Georgia, the greater management concern is the effect that erosion is having on the resources of the island’s western shoreline, or the back barrier. Catastrophic slumping and regular rates of erosion greater than 1 meter per year threaten important habitat, historical and pre-historical resources, and modern infrastructure on the island. Prior research has helped National Park Service (NPS) staff identify the most severe and vulnerable areas, but in order to develop effective management actions, information is needed on what forces and conditions cause erosion. To this end, the U.S. Geological Survey, in cooperation with the NPS, conducted two longitudinal surveys, one each at the beginning and end of the approximately year-long monitoring period from late 2011 to early 2013, along five selected segments of the back barrier of the Cumberland Island National Seashore. Monitoring stations were constructed at four of these locations that had previously been identified as erosional hotspots. The magnitude of erosion at each location was quantified to determine the relative influence of causative agents. Results indicate that erosion is, in general, highly variable within and among these segments of the Cumberland Island National Seashore’s back barrier. Observed erosion ranged from a maximum of 2.5 meters of bluff-line retreat to some areas that exhibited no net erosion over the 1-year study period. In terms of timing of erosion, three of the four sites were primarily affected by punctuated erosional events that were coincident with above-average high tides and elevated wind speeds. The fourth site exhibited steady, low-magnitude retreat throughout the study period. While it is difficult to precisely subscribe certain amounts of erosion to specific agents, this study provides insight into the mode of erosion among sites and the interaction among factors that set up conditions that may be leading to punctuated events. Estimates of sea-level rise were incorporated into the results of this study to project conditions that could be in place by the end of the 21st century. When using the erosion rates observed in this study to extrapolate future shoreline position, results indicate an average retreat (across all monitored locations) of 15 meters by 2050 and approximately 37 meters by 2100.

Georgia↗

USGS2007

Surficial Geologic Map of the West Franklin Quadrangle, Vanderburgh and Posey Counties, Indiana, and Henderson County, Kentucky

The valley of the Ohio River is filled with alluvium and outwash (unit Qal), which total 33-39 m thick under the land surface in the southeast part of the West Franklin quadrangle in Indiana, and 30.5-35 m thick under Diamond Island in the southwest corner of the quadrangle. The deposits are chiefly fine- to medium-grained, lithic quartzose sand, interbedded by lenses of clay, clayey silt, silt, coarse sand, granules, and gravel. Although grain size of the river alluvium varies widely, in general it fines upward-being gravelly sand to sandy gravel in the lower part, mainly sand in the middle part, and silty and clayey in the upper part (Holocene). The middle and lower parts probably accumulated during the Wisconsin Episode (late Pleistocene). The sandy middle part contains interbeds of clay, silt, and minor gravel. At the base is highly consolidated mud (silt and clay), sand, and gravel 2-10 m thick. This unit may be valley train that predates the Wisconsin Episode. Creek alluvium (unit Qa) is silt, clayey silt, and subordinate intercalated fine sand, granules, and pebbles; the coarser grains are generally concentrated in the basal 1-2 m of the deposit. Lenses and beds of clay are present locally. Fossil wood collected from an auger hole in the alluvial deposits of Little Creek, at depths of 10.6 m and 6.4 m, were dated 16,650?50 and 11,120?40 radiocarbon years, respectively. Probable lacustrine terrace silt and clay (Qlt), so-called slackwater-lake or backwater deposits, form deposits 12-22 m thick in the lowest reaches of tributary creeks to the Ohio River. The surfaces of the lacustrine deposits are terraces a few meters higher than the modern creek flood plains. Covering the bedrock upland is loess (Ql) 3-7.5 m thick, deposited about 18,000-12,000 years before present. Most surficial deposits in the quadrangle are probably no older than about 35,000 yrs. Lithologic logs, shear-wave velocities, and other cone penetrometer data are used to interpret depositional environments and geologic history of the alluvium and lacustrine deposits.

Scientific Investigations Map↗

USGS2019

Groundwater inflow toward a preheated volcanic conduit: Application to the 2018 eruption at Kīlauea Volcano, Hawai’i

The many successes in volcano forecasting over the past several decades owe mainly to pattern recognition, both in monitoring data and the geologic record. During the early stages of the 2018 Kīlauea eruption, the conceptual model of Stearns (1925), based on the explosive 1924 Kīlauea eruption, was highly influential. This model postulates that explosions are triggered by liquid-water inflow into a recently vacated magma conduit. Modern quantitative modeling approaches, supplemented by hydrogeologic data unavailable in 1925, yield a more nuanced view. Results demonstrate that liquid-water inflow would likely be delayed by months to years, owing to the inability of liquid water to transit a zone of very hot rock surrounding the conduit. The exercise demonstrates the use of physically based modeling to supplement traditional volcano-forecasting approaches during an ongoing event.

Hawaii↗

USGS2014

Holocene earthquakes and right-lateral slip on the left-lateral Darrington-Devils Mountain fault zone, northern Puget Sound, Washington

Sources of seismic hazard in the Puget Sound region of northwestern Washington include deep earthquakes associated with the Cascadia subduction zone, and shallow earthquakes associated with some of the numerous crustal (upper-plate) faults that crisscross the region. Our paleoseismic investigations on one of the more prominent crustal faults, the Darrington–Devils Mountain fault zone, included trenching of fault scarps developed on latest Pleistocene glacial sediments and analysis of cores from an adjacent wetland near Lake Creek, 14 km southeast of Mount Vernon, Washington. Trench excavations revealed evidence of a single earthquake, radiocarbon dated to ca. 2 ka, but extensive burrowing and root mixing of sediments within 50–100 cm of the ground surface may have destroyed evidence of other earthquakes. Cores in a small wetland adjacent to our trench site provided stratigraphic evidence (formation of a laterally extensive, prograding wedge of hillslope colluvium) of an earthquake ca. 2 ka, which we interpret to be the same earthquake documented in the trenches. A similar colluvial wedge lower in the wetland section provides possible evidence for a second earthquake dated to ca. 8 ka. Three-dimensional trenching techniques revealed evidence for 2.2 ± 1.1 m of right-lateral offset of a glacial outwash channel margin, and 45–70 cm of north-side-up vertical separation across the fault zone. These offsets indicate a net slip vector of 2.3 ± 1.1 m, plunging 14° west on a 286°-striking, 90°-dipping fault plane. The dominant right-lateral sense of slip is supported by the presence of numerous Riedel R shears preserved in two of our trenches, and probable right-lateral offset of a distinctive bedrock fault zone in a third trench. Holocene north-side-up, right-lateral oblique slip is opposite the south-side-up, left-lateral oblique sense of slip inferred from geologic mapping of Eocene and older rocks along the fault zone. The cause of this slip reversal is unknown but may be related to clockwise rotation of the Darrington–Devils Mountain fault zone into a position more favorable to right-lateral slip in the modern N-S compressional stress field.

Washington↗

USGS2012

History of surface displacements at the Yellowstone Caldera, Wyoming, from leveling surveys and InSAR observations, 1923-2008

Modern geodetic studies of the Yellowstone caldera, Wyoming, and its extraordinary tectonic, magmatic, and hydrothermal systems date from an initial leveling survey done throughout Yellowstone National Park in 1923 by the U.S. Coast and Geodetic Survey. A repeat park-wide survey by the U.S. Geological Survey (USGS) and the University of Utah during 1975-77 revealed that the central part of the caldera floor had risen more than 700 mm since 1923, at an average rate of 14±1 mm/yr. From 1983 to 2007, the USGS conducted 15 smaller surveys of a single level line that crosses the northeast part of the caldera, including the area where the greatest uplift had occurred from 1923 to 1975-77. The 1983 and 1984 surveys showed that uplift had continued at an average rate of 22±1 mm/yr since 1975-77, but no additional uplift occurred during 1984-85 (-2±5 mm/yr), and during 1985-95 the area subsided at an average rate of 19±1 mm/yr. The change from uplift to subsidence was accompanied by an earthquake swarm, the largest ever recorded in the Yellowstone area (as of March 2012), starting in October 1985 and located near the northwest rim of the caldera. Interferometric synthetic aperture radar (InSAR) images showed that the area of greatest subsidence migrated from the northeast part of the caldera (including the Sour Creek resurgent dome) during 1992-93 to the southwest part (including the Mallard Lake resurgent dome) during 1993-95. Thereafter, uplift resumed in the northeast part of the caldera during 1995-96, while subsidence continued in the southwest part. The onset of uplift migrated southwestward, and by mid-1997, uplift was occurring throughout the entire caldera (essentially rim to rim, including both domes). Consistent with these InSAR observations, leveling surveys indicated 24±3 mm of uplift in the northeast part of the caldera during 1995-98. The beginning of uplift was coincident with or followed shortly after an earthquake swarm near the north caldera rim during June-July 1995 - the strongest swarm since 1985. Rather than a single deformation source as inferred from leveling surveys, the InSAR images revealed two distinct sources - one beneath each resurgent dome on the caldera floor. Subsequently, repeated GPS surveys (sometimes referred to as "campaign" surveys to distinguish them from continuous GPS observations) and InSAR images revealed a third deformation source beneath the north caldera rim. The north-rim source started to inflate in or about 1995, resulting in as much as 80 mm of surface uplift by 2000. Meanwhile, motion of the caldera floor changed from uplift to subsidence during 1997-8. The north rim area rose, while the entire caldera floor (including both domes) subsided until 2002, when both motions paused. Uplift in the northeast part of the caldera resumed in mid-2004 at a historically unprecedented rate of as much as 70 mm/yr, while the north rim area subsided at a lesser rate. Resurveys of the level line across the northeast part of the caldera in 2005 and 2007 indicated the greatest average uplift rate since the initial survey in 1923-53±3 mm/yr. Data from a nearby continuous GPS (CGPS) station showed that the uplift rate slowed to 40-50 mm/yr during 2007-8 and to near zero by September 2009. Following an intense earthquake swarm during January-February 2010, this one near the northwest caldera rim and the strongest since the 1985 swarm in the same general area, CGPS stations recorded the onset of subsidence throughout the entire caldera. Any viable model for the cause(s) of ground deformation at Yellowstone should account for (1) three distinct deformation sources and their association with both resurgent domes and the north caldera rim; (2) interplay among these sources, as suggested by the timing of major changes in deformation mode; (3) migration of the area of greatest subsidence or uplift from the northeast part of the caldera to the southwest part during 1992-95 and 1995-97, respectively; (4) repeated cycles of uplift and subsidence and sudden changes from uplift to subsidence or vice versa; (5) spatial and temporal relationships between changes in deformation mode and strong earthquake swarms; and (6) lateral dimensions of all three deforming areas that indicate source depths in the range of 5 to 15 km. We prefer a conceptual model in which surface displacements at Yellowstone are caused primarily by variations in the flux of basaltic magma into the crust beneath the caldera. Specifically, we envision a magmatic conduit system beneath the northeast part of the caldera that supplies basalt from a mantle source to an accumulation zone at 5-10 km depth, perhaps at a rheological boundary within a crystallizing rhyolite body remnant from past eruptions. Increases in the magma flux favor uplift of the caldera and decreases favor subsidence. A delicate equilibrium exists among the mass and heat flux from basaltic intrusions, heat and volatile loss from the crystallizing rhyolite body, and the overlying hydrothermal system. In the absence of basalt input, steady subsidence occurs mainly as a result of fluid loss from crystallizing rhyolite. At times when a self-sealing zone in the deep hydrothermal system prevents the escape of magmatic fluid, the resulting pressure increase contributes to surface uplift within the caldera; such episodes end when the seal ruptures during an earthquake swarm. To account for the north rim deformation source, we propose that magma or fluid exsolved from magma episodically escapes the caldera system at the three-way structural intersection of (1) the northern caldera boundary, (2) an active seismic belt to the north-northwest that is associated with the Hebgen Lake fault zone, and (3) the Norris - Mammoth corridor - a zone of faults, volcanic vents, and thermal activity that strikes north from the north rim of the caldera near Norris Geyser Basin to Mammoth Hot Springs near the northern boundary of Yellowstone National Park. Increased fluid flux out of the caldera by way of this intersection favors subsidence of the north rim area, and decreased flux favors uplift. This model does not account for poroelastic and thermoelastic effects, nonelastic rheology, or heat and mass transport in the hot and wet subcaldera crust. Such effects almost surely play a role in caldera deformation and are an important topic of ongoing research.

Wyoming↗

USGS2014

Petrographic maturity parameters of a Devonian shale maturation series, Appalachian Basin, USA. ICCP Thermal Indices Working Group interlaboratory exercise

This paper presents results of an interlaboratory exercise on organic matter optical maturity parameters using a natural maturation series comprised by three Devonian shale samples (Huron Member, Ohio Shale) from the Appalachian Basin, USA. This work was conducted by the Thermal Indices Working Group of the International Committee for Coal and Organic Petrology (ICCP) Commission II (Geological Applications of Organic Petrology). This study aimed to compare: 1. maturation predicted by different types of petrographic parameters (vitrinite reflectance and spectral fluorescence of telalginite), 2. reproducibility of the results for these maturation parameters obtained by different laboratories, and 3. improvements in the spectral fluorescence measurement obtained using modern detection systems in comparison with the results from historical round robin exercises. Mean random vitrinite reflectance measurements presented the highest level of reproducibility (group standard deviation 0.05) for low maturity and reproducibility diminished with increasing maturation (group standard deviation 0.12). Corrected fluorescence spectra, provided by 14 participants, showed a fair to good correspondence. Standard deviation of the mean values for spectral parameters was lowest for the low maturity sample but was also fairly low for higher maturity samples. A significant improvement in the reproducibility of corrected spectral fluorescence curves was obtained in the current exercise compared to a previous investigation of Toarcian organic matter spectra in a maturation series from the Paris Basin. This improvement is demonstrated by lower values of standard deviation and is interpreted to reflect better performance of newer photo-optical measuring systems. Fluorescence parameters measured here are in good agreement with vitrinite reflectance values for the least mature shale but indicate higher maturity than shown by vitrinite reflectance for the two more mature shales. This red shift in λ max beyond 0.65% vitrinite reflectance was also observed in studies of Devonian shale in other basins, suggesting that the accepted correlation for these two petrographic thermal maturity parameters needs to be re-evaluated. A good linear correlation between λ max and T max for this maturation series was observed and λ max 600 nm corresponds to T max of 440 °C. Nevertheless if a larger set of Devonian samples is included, the correlation is polynomial with a jump in λ max ranging from 540 to 570 nm. Up to 440 °C of T max , the λ max , mostly, reaches up to 500 nm; beyond a T max of 440 °C, λ max is in the range of 580–600 nm. This relationship places the “red shift” when the onset of the oil window is reached at T max of 440 °C. Moreover, the correlation between HI and λ max (r 2 = 0.70) shows a striking inflection and decrease in HI above a λ max of 600 nm, coincident with the approximate onset of hydrocarbon generation in these rocks.

International Journal of Coal Geology↗

USGS2021

National-scale reservoir thermal energy storage pre-assessment for the United States

The U.S. Geological Survey is performing a pre-assessment of the cooling potential for reservoir thermal energy storage (RTES) in five generalized geologic regions (Basin and Range, Coastal Plains, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Reservoir models are developed for the metropolitan areas of eight cities (Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon) so that computed metrics can be compared to evaluate RTES potential across diverse climates, geologic settings, and physiography. Permeable, semi-confined/confined units that underlie more-utilized aquifers and contain low-quality groundwater are selected for each city. Energy storage metrics are computed for the anticipated total thickness of stratigraphy for which RTES might be feasible, including estimated required well spacing, thermal storage capacity, and thermal recovery efficiency over time. Falta et al. (2016) showed that for a modern 25,000 square-foot (2,323 square-meter), two-story office building, cooling needs exceed heating demand for almost every region of the country. We therefore use Falta et al.’s cooling demand for each city as the representative RTES stress condition for metric computation, allowing comparisons across regions. Results indicate that favorable RTES conditions exist in each region, particularly in the Illinois Basin, Coastal Plains, and Basin and Range. Thermal recovery efficiencies are very high in all regions and increase over time. The thermal storage capacity metric is most informative in the pre-assessment and underscores the importance of mapping reservoir thicknesses and porosities to permit detailed mapping of thermal storage capacity per unit area as a key RTES resource classification standard. This assessment provides a basic understanding of the RTES potential in several metropolitan areas and geologic regions throughout the United States and will aid further evaluation of national RTES efficacy.

Conference Paper↗

USGS2018

Titanium mineral resources in heavy-mineral sands in the Atlantic coastal plain of the southeastern United States

This study examined titanium distribution in the Atlantic Coastal Plain of the southeastern United States; the titanium is found in heavy-mineral sands that include the minerals ilmenite (Fe 2+ TiO 3 ), rutile (TiO 2 ), or leucoxene (an alteration product of ilmenite). Deposits of heavy-mineral sands in ancient and modern coastal plains are a significant feedstock source for the titanium dioxide pigments industry. Currently, two heavy-mineral sands mining and processing operations are active in the southeast United States producing concentrates of ilmenite-leucoxene, rutile, and zircon. The results of this study indicate the potential for similar deposits in many areas of the Atlantic Coastal Plain. This study used the titanium analyses of 3,457 stream sediment samples that were analyzed as part of the U.S. Geological Survey’s National Geochemical Survey program. This data set was analyzed by an integrated spatial modeling technique known as Bayesian hierarchical modeling to map the regional-scale, spatial distribution of titanium concentrations. In particular, clusters of anomalous concentrations of titanium occur: (1) along the Fall Zone, from Virginia to Alabama, where metamorphic and igneous rocks of the Piedmont region contact younger sediments of the Coastal Plain; (2) a paleovalley near the South Carolina and North Carolina border; (3) the upper and middle Atlantic Coastal Plain of North Carolina; (4) the majority of the Atlantic Coastal Plain of Virginia; and (5) barrier islands and stretches of the modern shoreline from South Carolina to northeast Florida. The areas mapped by this study could help mining companies delimit areas for exploration.

Scientific Investigations Report↗

USGS2003

High resolution seismic imaging of faults beneath Limón Bay, northern Panama Canal, Republic of Panama

High-resolution seismic reflection profiles from Limo??n Bay, Republic of Panama, were acquired as part of a seismic hazard investigation of the northern Panama Canal region. The seismic profiles image gently west and northwest dipping strata of upper Miocene Gatu??n Formation, unconformably overlain by a thin (<20 m) sequence of Holocene muds. Numerous faults, which have northeast trends where they can be correlated between seismic profiles, break the upper Miocene strata. Some of the faults have normal displacement, but on many faults, the amount and type of displacement cannot be determined. The age of displacement is constrained to be Late Miocene or younger, and regional geologic considerations suggest Pliocene movement. The faults may be part of a more extensive set of north- to northeast-trending faults and fractures in the canal region of central Panama. Low topography and the faults in the canal area may be the result of the modern regional stress field, bending of the Isthmus of Panama, shearing in eastern Panama, or minor deformation of the Panama Block above the Caribbean subduction zone. For seismic hazard analysis of the northern canal area, these faults led us to include a source zone of shallow faults proximal to northern canal facilities. ?? 2003 Elsevier B.V. All rights reserved.

Tectonophysics↗

USGS2009

Age, geochemical composition, and distribution of Oligocene ignimbrites in the northern Sierra Nevada, California: Implications for landscape morphology, elevation, and drainage divide geography of the Nevadaplano

To gain a better understanding of the topographic and landscape evolution of the Cenozoic Sierra Nevada and Basin and Range, we combine geochemical and isotopic age correlations with palaeoaltimetry data from widely distributed ignimbrites in the northern Sierra Nevada, California. A sequence of Oligocene rhyolitic ignimbrites is preserved across the modern crest of the range and into the western foothills. Using trace and rare earth element geochemical analyses of volcanic glass, these deposits have been correlated to ignimbrites described and isotopically dated in the Walker Lane fault zone and in central Nevada (Henry et al. , 2004, Geologic map of the Dogskin mountain quadrangle; Washoe County, Nevada; Faulds et al. , 2005, Geology, v. 33, p. 505–508). Ignimbrite deposits were sampled within the northern Sierra Nevada and western Nevada, and four distinct geochemical compositions were identified. The majority of samples from within the northern Sierra Nevada have compositions similar to the tuffs of Axehandle Canyon or Rattlesnake Canyon, both likely sourced from the same caldera complex in either the Clan Alpine Mountains or the Stillwater Range, or to the tuff of Campbell Creek, sourced from the Desatoya Mountains caldera. New 40 Ar/ 39 Ar age determinations from these samples of 31.2, 30.9, and 28.7 Ma, respectively, support these correlations. Based on an Oligocene palinspastic reconstruction of the region, our results show that ignimbrites travelled over 200 km from their source calderas across what is now the crest of the Sierra Nevada, and that during that time, no drainage divide existed between the ignimbrite source calderas in central Nevada and sample locations 200 km to the west. Palaeoaltimetry data from Sierra Nevada ignimbrites, based on the hydrogen isotopic composition of hydration water in glass, reflect the effect of a steep western slope on precipitation and indicate that the area had elevations similar to the present-day range. These combined results suggest that source calderas were likely located in a region of high elevation to the east of the Oligocene Sierra Nevada, which had a steep western slope that allowed for the large extent and broad distribution of the ignimbrites.

International Geology Review↗

USGS1981

Evaluation of radar imagery for geological and cartographic applications

The House/Senate conference report on H.R. 4930 (96th Congress), the Department of the Interior and Related Agencies Appropriations bill, 1980, stated that the U.S. Geological Survey should "begin the use of side-looking airborne radar imagery for topographic and geological mapping, and geological resource surveys in promising areas, particularly Alaska." In response to this mandate, the Survey acquired radar data and began scientific studies to analyze and interpret these data. About 70 percent of the project funding was used to acquire radar imagery and to evaluate Alaskan applications. Results of these studies indicate that radar images have a unique incremental value for certain geologic and cartographic applications but that the images are best suited for use as supplemental information sources or as primary data sources in areas of persistent cloud cover. The value of radar data is greatest for geologic mapping and resource surveys, particularly for mineral and petroleum exploration, where the objective is to locate any single feature or group of features that may control the occurrences of these resources. Radar images are considered by oil and gas companies to be worth the cost of data acquisition within a limited area of active exploration. Radar images also have incremental value for geologic site studies and hazard mapping. The need in these cases is TO inventory all geologic hazards to human life, property, resources, and the environment. For other geologic applications, radar images have a relatively small incremental value over a combination of Landsat images and aerial photographs. The value of radar images for cartographic applications is minimal, except when they are used as a substitute for aerial photographs and topographic maps in persistently cloud-covered areas. If conventional data sources are not available, radar images provide useful information on terrain relief, landforms, drainage patterns, and land cover. Screen less lithography is a low-cost method of reproducing the images. The images from modern, commercially available radar systems have good visual quality; they also have better geometric accuracy and higher information content than images from older systems. Images from modern systems, however, also have some of the same disadvantages as those from older systems. The most serious problem is that considerable information is lost in the process of recording the radar return on film. Another problem is that the oblique radar view of the landscape results in interpretations that are biased by look direction. A compromise antenna depression angle also commonly results in inadequate or excessive shadowing in parts of the image. There is a need for high-resolution digital data, not currently available from the private sector, to significantly improve the utility of radar data for geologic and cartographic applications.

Open-File Report↗

USGS2016

Water isotope systematics: Improving our palaeoclimate interpretations

The stable isotopes of oxygen and hydrogen, measured in a variety of archives, are widely used proxies in Quaternary Science. Understanding the processes that control δ18O change have long been a focus of research (e.g. Shackleton and Opdyke, 1973; Talbot, 1990 ; Leng, 2006). Both the dynamics of water isotope cycling and the appropriate interpretation of geological water-isotope proxy time series remain subjects of active research and debate. It is clear that achieving a complete understanding of the isotope systematics for any given archive type, and ideally each individual archive, is vital if these palaeo-data are to be used to their full potential, including comparison with climate model experiments of the past. Combining information from modern monitoring and process studies, climate models, and proxy data is crucial for improving our statistical constraints on reconstructions of past climate variability. As climate models increasingly incorporate stable water isotope physics, this common language should aid quantitative comparisons between proxy data and climate model output. Water-isotope palaeoclimate data provide crucial metrics for validating GCMs, whereas GCMs provide a tool for exploring the climate variability dominating signals in the proxy data. Several of the studies in this set of papers highlight how collaborations between palaeoclimate experimentalists and modelers may serve to expand the usefulness of palaeoclimate data for climate prediction in future work. This collection of papers follows the session on Water Isotope Systematics held at the 2013 AGU Fall Meeting in San Francisco. Papers in that session, the breadth of which are represented here, discussed such issues as; understanding sub-GNIP scale (Global Network for Isotopes in Precipitation, (IAEA/WMO, 2006)) variability in isotopes in precipitation from different regions, detailed examination of the transfer of isotope signals from precipitation to geological archives, and the implications of advances in understanding in these areas for the interpretation of palaeo records and proxy data – climate model comparison. Here, we briefly review these areas of research, and discuss challenges for the water isotope community in improving our ability to partition climate vs. auxiliary signals in palaeoclimate data.

Quaternary Science Reviews↗

USGS2017

Reconstructing Common Era relative sea-level change on the Gulf Coast of Florida

To address a paucity of Common Era data in the Gulf of Mexico, we reconstructed ~ 1.1 m of relative sea-level (RSL) rise over the past ~ 2000 years at Little Manatee River (Gulf Coast of Florida, USA). We applied a regional-scale foraminiferal transfer function to fossil assemblages preserved in a core of salt-marsh peat and organic silt that was dated using radiocarbon and recognition of pollution, 137 Cs and pollen chronohorizons. Our proxy reconstruction was combined with tide-gauge data from four nearby sites spanning 1913–2014 CE. Application of an Errors-in-Variables Integrated Gaussian Process (EIV-IGP) model to the combined proxy and instrumental dataset demonstrates that RSL fell from ~ 350 to 100 BCE, before rising continuously to present. This initial RSL fall was likely the result of local-scale processes (e.g., silting up of a tidal flat or shallow sub-tidal shoal) as salt-marsh development at the site began. Since ~ 0 CE, we consider the reconstruction to be representative of regional-scale RSL trends. We removed a linear rate of 0.3 mm/yr from the RSL record using the EIV-IGP model to estimate climate-driven sea-level trends and to facilitate comparison among sites. This analysis demonstrates that since ~ 0 CE sea level did not deviate significantly from zero until accelerating continuously from ~ 1500 CE to present. Sea level was rising at 1.33 mm/yr in 1900 CE and accelerated until 2014 CE when a rate of 2.02 mm/yr was attained, which is the fastest, century-scale trend in the ~ 2000-year record. Comparison to existing reconstructions from the Gulf coast of Louisiana and the Atlantic coast of northern Florida reveal similar sea-level histories at all three sites. We explored the influence of compaction and fluvial processes on our reconstruction and concluded that compaction was likely insignificant. Fluvial processes were also likely insignificant, but further proxy evidence is needed to fully test this hypothesis. Our results indicate that no significant Common Era sea-level changes took place on the Gulf and southeastern Atlantic U.S. coasts until the onset of modern sea-level rise in the late 19th century.

Florida↗

USGS2003

Late Holocene estuarine-inner shelf interactions; is there evidence of an estuarine retreat path for Tampa Bay, Florida?

The purpose of this study was to determine if and how a large, modern estuarine system, situated in the middle of an ancient carbonate platform, has affected its adjacent inner shelf both in the past during the last, post-glacial sea-level rise and during the present. An additional purpose was to determine if and how this inner shelf seaward of a major estuary differed from the inner shelves located just to the north and south but seaward of barrier-island shorelines. Through side-scan sonar mosaicking, bathymetric studies, and ground-truthing using surface grab samples as well as diver observations, two large submarine sand plains were mapped - one being the modern ebb-tidal delta and the other interpreted to be a relict ebb-tidal delta formed earlier in the Holocene. The most seaward portion of the inner shelf studied consists of a field of lobate, bathymetrically elevated, fine-sand accumulations, which were interpreted to be sediment-starved 3D dunes surrounded by small 2D dunes composed of coarse molluscan shell gravel. Additionally, exposed limestone hardbottoms supporting living benthic communities were found as well. This modern shelf sedimentary environment is situated on a large, buried shelf valley, which extends eastward beneath the modern Tampa Bay estuary. These observations plus the absence of an incised shelf valley having surficial bathymetric expression, and the absence of sand bodies normally associated with back-tracking estuarine systems indicate that there was no cross-shelf estuarine retreat path formed during the last rise in sea level. Instead, the modern Tampa Bay formed within a mid-platform, low-relief depression, which was flooded by rising marine waters late in the Holocene. With continued sea-level rise in the late Holocene, this early embayment was translated eastward or landward to its present position, whereby a larger ebb-tidal delta prograded out onto the inner shelf. Extensive linear sand ridges, common to the inner shelves to the north and south, did not form in this shelf province because it was a low-energy, open embayment lacking the wave climate and nearshore zone necessary to create such sand bodies. The distribution of bedforms on the inner shelf and the absence of seaward-oriented 2D dunes on the modern ebb-tidal delta indicate that the modern estuarine system has had little effect on its adjacent inner shelf. ?? 2003 Elsevier B.V. All rights reserved.

Marine Geology↗

USGS2005

Sedimentology and stratigraphy of the Palisades, Lower Comanche, and Arroyo Grande areas of the Colorado River Corridor, Grand Canyon, Arizona

This report analyzes various depositional environments in three archaeologically significant areas of the Colorado River corridor in Grand Canyon. Archaeological features are built on and buried by fluvial, aeolian, and locally derived sediment, representing a complex interaction between geologic and cultural history. These analyses provide a basis for determining the potential influence of Glen Canyon Dam operations on selected archaeological sites and thus for guiding dam operations in order to facilitate preservation of cultural resources. This report presents initial results of a joint effort between geologists and archaeologists to evaluate the significance of various depositional processes and environments in the prehistoric formation and modern preservation of archaeological sites along the Colorado River corridor in Grand Canyon National Park. Stratigraphic investigations of the Palisades, Lower Comanche, and Arroyo Grande areas of Grand Canyon yield detailed information regarding the sedimentary history at these locations. Reconstruction of past depositional settings is critical to a thorough understanding of the geomorphic and stratigraphic evolution of these three archaeologically significant areas. This examination of past sedimentary environments allows the relative significance of fluvial, aeolian, debris-fan, and slope-wash sedimentary deposits to be identified at each site. In general the proportion of fluvial sediment (number and thickness of flood deposits) is shown to decrease away from the river, and locally derived sediment becomes more significant. Flood sequences often occur as 'couplets' that contain a fluvial deposit overlain by an interflood unit that reflects reworking of fluvial sediment at the land surface by wind and local runoff. Archaeological features are built on and buried by sediment of various depositional environments, implying a complex interaction between geologic and cultural history. Such field analysis, which combines geological and archaeological information and techniques, can provide a basis for future determination of the effects of Glen Canyon Dam operations on selected areas of the river corridor. This knowledge is essential to the development of preservation strategies for cultural resources in Grand Canyon.

Scientific Investigations Report↗

USGS2015

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating &sim;4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at &sim;6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by &sim;2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗

USGS2014

The 3D Elevation Program initiative: A call for action

The 3D Elevation Program (3DEP) initiative is accelerating the rate of three-dimensional (3D) elevation data collection in response to a call for action to address a wide range of urgent needs nationwide. It began in 2012 with the recommendation to collect (1) high-quality light detection and ranging (lidar) data for the conterminous United States (CONUS), Hawaii, and the U.S. territories and (2) interferometric synthetic aperture radar (ifsar) data for Alaska. Specifications were created for collecting 3D elevation data, and the data management and delivery systems are being modernized. The National Elevation Dataset (NED) will be completely refreshed with new elevation data products and services. The call for action requires broad support from a large partnership community committed to the achievement of national 3D elevation data coverage. The initiative is being led by the U.S. Geological Survey (USGS) and includes many partners—Federal agencies and State, Tribal, and local governments—who will work together to build on existing programs to complete the national collection of 3D elevation data in 8 years. Private sector firms, under contract to the Government, will continue to collect the data and provide essential technology solutions for the Government to manage and deliver these data and services. The 3DEP governance structure includes (1) an executive forum established in May 2013 to have oversight functions and (2) a multiagency coordinating committee based upon the committee structure already in place under the National Digital Elevation Program (NDEP). The 3DEP initiative is based on the results of the National Enhanced Elevation Assessment (NEEA) that was funded by NDEP agencies and completed in 2011. The study, led by the USGS, identified more than 600 requirements for enhanced (3D) elevation data to address mission-critical information requirements of 34 Federal agencies, all 50 States, and a sample of private sector companies and Tribal and local governments. As proposed, the 3DEP effort would begin providing products and services to partners and the public in 2015. The strategy is to leverage funding from partners and to increase contributions from all sources so that the investment rises from the current level of approximately $50 million to $146 million annually. Because 3DEP depends on private sector mapping firms to collect data, jobs will be created as the funding increases. Additional jobs will result when the 3DEP data drive the implementation and development of applications, as documented in the NEEA study. At the full funding level, 3DEP could return more than $690 million annually in new benefits directly to the private sector and indirectly to citizens through improved government program services. When 3DEP data are widely available, further private sector and government innovations will follow for years to come.

Circular↗