Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Well Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2011

Hydrogeology, Chemical and Microbial Activity Measurement Through Deep Permafrost

Little is known about hydrogeochemical conditions beneath thick permafrost, particularly in fractured crystalline rock, due to difficulty in accessing this environment. The purpose of this investigation was to develop methods to obtain physical, chemical, and microbial information about the subpermafrost environment from a surface-drilled borehole. Using a U-tube, gas and water samples were collected, along with temperature, pressure, and hydraulic conductivity measurements, 420 m below ground surface, within a 535 m long, angled borehole at High Lake, Nunavut, Canada, in an area with 460-m-thick permafrost. Piezometric head was well above the base of the permafrost, near land surface. Initial water samples were contaminated with drill fluid, with later samples <40% drill fluid. The salinity of the non-drill fluid component was <20,000 mg/L, had a Ca/Na ratio above 1, with ??18O values ???5??? lower than the local surface water. The fluid isotopic composition was affected by the permafrost-formation process. Nonbacteriogenic CH4 was present and the sample location was within methane hydrate stability field. Sampling lines froze before uncontaminated samples from the subpermafrost environment could be obtained, yet the available time to obtain water samples was extended compared to previous studies. Temperature measurements collected from a distributed temperature sensor indicated that this issue can be overcome easily in the future. The lack of methanogenic CH4 is consistent with the high sulfate concentrations observed in cores. The combined surface-drilled borehole/U-tube approach can provide a large amount of physical, chemical, and microbial data from the subpermafrost environment with few, controllable, sources of contamination. ?? 2010 The Author(s). Journal compilation ?? 2010 National Ground Water Association.

Ground Water↗
USGS2006

Modeling decadal timescale interactions between surface water and ground water in the central Everglades, Florida, USA

Surface-water and ground-water flow are coupled in the central Everglades, although the remoteness of this system has hindered many previous attempts to quantify interactions between surface water and ground water. We modeled flow through a 43,000 ha basin in the central Everglades called Water Conservation Area 2A. The purpose of the model was to quantify recharge and discharge in the basin's vast interior areas. The presence and distribution of tritium in ground water was the principal constraint on the modeling, based on measurements in 25 research wells ranging in depth from 2 to 37 m. In addition to average characteristics of surface-water flow, the model parameters included depth of the layer of 'interactive' ground water that is actively exchanged with surface water, average residence time of interactive ground water, and the associated recharge and discharge fluxes across the wetland ground surface. Results indicated that only a relatively thin (8 m) layer of the 60 m deep surfical aquifer actively exchanges surface water and ground water on a decadal timescale. The calculated storage depth of interactive ground water was 3.1 m after adjustment for the porosity of peat and sandy limestone. Modeling of the tritium data yielded an average residence time of 90 years in interactive ground water, with associated recharge and discharge fluxes equal to 0.01 cm d -1. 3H/3He isotopic ratio measurements (which correct for effects of vertical mixing in the aquifer with deeper, tritium-dead water) were available from several wells, and these indicated an average residence time of 25 years, suggesting that residence time was overestimated using tritium measurements alone. Indeed, both residence time and storage depth would be expected to be overestimated due to vertical mixing. The estimate of recharge and discharge (0.01 cm d-1) that resulted from tritium modeling therefore is still considered reliable, because the ratio of residence time and storage depth (used to calculated recharge and discharge) is much less sensitive to vertical mixing compared with residence time alone. We conclude that a small but potentially significant component of flow through the Everglades is recharged to the aquifer and stored there for years to decades before discharged back to surface water. Long-term storage of water and solutes in the ground-water system beneath the wetlands has implications for restoration of Everglades water quality.

Journal of Hydrology↗
USGS2004

The rise and fall of water hyacinth in Lake Victoria and the Kagera River basin, 1989-2001

Water hyacinth (Eichhornia crassipes (Mart.) Solms) is an invasive aquatic macrophyte associated with major negative economic and ecological impacts to the Lake Victoria region since the plant's establishment in Uganda in the 1980s. Reliable estimates of water hyacinth distribution and extent are required to gauge the severity of the problem through time, relate water hyacinth abundance to environmental factors, identify areas requiring management action, and assess the efficacy of management actions. To provide such estimates and demonstrate the utility of remote sensing for this application, we processed and analyzed remotely sensed imagery to determine the distribution and extent of water hyacinth. Maps were produced and coverage was quantified using a hybrid unsupervised image classification approach with manual editing for each of the riparian countries of Kenya, Tanzania, and Uganda, as well as for numerous gulfs and bays. A similar procedure was carried out for selected lakes in the Rwanda-Tanzania borderlands lakes region in the Kagera River basin. Results confirm the severity of the water hyacinth infestation, especially in the northern parts of the lake. A maximum lake-wide extent of at least 17,374 ha was attained in 1998. Following this, a combination of factors, including conditions associated with the 1997 to 1998 El Nin??o and biocontrol with water hyacinth weevils, appear to have contributed to a major decline in water hyacinth in the most affected parts of the lake. Some lakes in the Kagera basin, such as Lake Mihindi, Rwanda, were severely infested in the late 1990s, but the level of infestation in most of these decreased markedly by the early 2000s.

Journal of Aquatic Plant Management↗
USGS1998

An improved technique for modeling initial reservoir hydrocarbon saturation distributions: Applications in Illinois (USA) aux vases oil reservoirs

An improved technique for modeling the initial reservoir hydrocarbon saturation distributions is presented. In contrast to the Leverett J-function approach, this methodology (hereby termed flow-unit-derived initial oil saturation or FUSOI) determines the distributions of the initial oil saturations from a measure of the mean hydraulic radius, referred to as the flow zone indicator (FZI). FZI is derived from porosity and permeability data. In the FUSOI approach, capillary pressure parameters, S(wir), P(d), and ??, derived from the Brooks and Corey (1966) model [Brooks, R.H., Corey, A.T., 1966. Hydraulic properties of porous media, Hydrology Papers, Colorado State Univ., Ft. Collins, No. 3, March.], are correlated to the FZI. Subsequent applications of these parameters then permit the computation of improved hydrocarbon saturations as functions of FZI and height above the free water level (FWL). This technique has been successfully applied in the Mississippian Aux Vases Sandstone reservoirs of the Illinois Basin (USA). The Aux Vases Zeigler field (Franklin County, IL, USA) was selected for a field-wide validation of this FUSOI approach because of the availability of published studies. With the initial oil saturations determined on a depth-by-depth basis in cored wells, it was possible to geostatistically determine the three-dimensional (3-D) distributions of initial oil saturations in the Zeigler field. The original oil-in-place (OOIP), computed from the detailed initialization of the 3-D reservoir simulation model of the Zeigler field, was found to be within 5.6% of the result from a rigorous material balance method.An improved technique for modeling the initial reservoir hydrocarbon saturation distributions is presented. In contrast to the Leverett J-function approach, this methodology (hereby termed flow-unit-derived initial oil saturation or FUSOI) determines the distributions of the initial oil saturations from a measure of the mean hydraulic radius, referred to as the flow zone indicator (FZI). FZI is derived from porosity and permeability data. In the FUSOI approach, capillary pressure parameters, Swir, Pd, and ??, derived from the Brooks and Corey (1966) model, are correlated to the FZI. Subsequent applications of these parameters then permit the computation of improved hydrocarbon saturations as functions of FZI and height above the free water level (FWL). This technique has been successfully applied in the Mississippian Aux Vases Sandstone reservoirs of the Illinois Basin (USA). The Aux Vases Zeigler field (Franklin County, IL, USA) was selected for a field-wide validation of this FUSOI approach because of the availability of published studies. With the initial oil saturations determined on a depth-by-depth basis in cored wells, it was possible to geostatistically determine the three-dimensional (3-D) distributions of initial oil saturations in the Zeigler field. The original oil-in-place (OOIP), computed from the detailed initialization of the 3-D reservoir simulation model of the Zeigler field, was found to be within 5.6% of the result from a rigorous material balance method.

Journal of Petroleum Science and Engineering↗
USGS1974

Time of travel and dye dosage for an irrigation canal system near Duchesne, Utah

Fracturing and subsidence of the land surface in the Milford area oil Utah have resulted from the decline of water levels due to pumping in unconsolidated deposits of Quaternary age. To the writers’ knowledge, these are the first such effects of ground-water withdrawal reported in Utah. The fracturing is in an area about 1 mile (1.6 km) wide and 11 miles (18 km) long near Milford, in an unsaturated clay-silt zone (locally peaty at top) in the upper part of the principal ground-water reservoir. The fractures range in length from several feet to more than 100 feet (30 m), and their maximum measured depth in 1972 was 4 feet (1.2 m). Land subsidence in the Milford area is demonstrated by three lines of evidence: (1) collapse structures, (2) well casings that protrude higher above the land surface than when first placed in the borehole, and (3) lower elevations at National Ocean Survey (formerly U.S. Coast and Geodetic Survey) bench marks in 1970 than in 1908. This evidence shows that land subsidence in the Milford area is of two types, each having a different origin. One type has a near-surface origin in the clay-silt zone in the upper part of the principal groundwater reservoir, and the other is in the lower artesian aquifers of the principal ground-water reservoir. The amount of observed subsidence ranges from 0.05 foot (0.015 m) at the bench mark at Read to about 6 feet (1.8 m) at collapse structures in the Hay Springs area.

Utah↗
USGS2002

Groundwater recharge and agricultural contamination

Agriculture has had direct and indirect effects on the rates and compositions of groundwater recharge and aquifer biogeochemistry. Direct effects include dissolution and transport of excess quantities of fertilizers and associated materials and hydrologic alterations related to irrigation and drainage. Some indirect effects include changes in water–rock reactions in soils and aquifers caused by increased concentrations of dissolved oxidants, protons, and major ions. Agricultural activities have directly or indirectly affected the concentrations of a large number of inorganic chemicals in groundwater, for example NO 3 – , N 2 , Cl, SO 4 2– , H + , P, C, K, Mg, Ca, Sr, Ba, Ra, and As, as well as a wide variety of pesticides and other organic compounds. For reactive contaminants like NO 3 – , a combination of chemical, isotopic, and environmental-tracer analytical approaches might be required to resolve changing inputs from subsequent alterations as causes of concentration gradients in groundwater. Groundwater records derived from multi-component hydrostratigraphic data can be used to quantify recharge rates and residence times of water and dissolved contaminants, document past variations in recharging contaminant loads, and identify natural contaminant-remediation processes. These data indicate that many of the world's surficial aquifers contain transient records of changing agricultural contamination from the last half of the 20th century. The transient agricultural groundwater signal has important implications for long-term trends and spatial heterogeneity in discharge.

Hydrogeology Journal↗
USGS2018

Sampling the stream landscape: Improving the applicability of an ecoregion-level capture probability model for stream fishes

Temporal and spatial variability in streams result in heterogeneous gear capture probability (i.e., the proportion of available individuals identified) that confounds interpretation of data used to monitor fish abundance. We modeled tow-barge electrofishing capture probability at multiple spatial scales for nine Ozark Highland stream fishes. In addition to fish size, we identified seven reach-scale environmental characteristics associated with variable capture probability: stream discharge, water depth, conductivity, water clarity, emergent vegetation, wetted width–depth ratio, and proportion of riffle habitat. The magnitude of the relationship between capture probability and both discharge and depth varied among stream fishes. We also identified lithological characteristics among stream segments as a coarse-scale source of variable capture probability. The resulting capture probability model can be used to adjust catch data and derive reach-scale absolute abundance estimates across a wide range of sampling conditions with similar effort as used in more traditional fisheries surveys (i.e., catch per unit effort). Adjusting catch data based on variable capture probability improves the comparability of data sets, thus promoting both well-informed conservation and management decisions and advances in stream-fish ecology.

Arkansas, Missouri, Oklahoma↗
USGS2020

Well predictive performance of play-wide and Subarea Random Forest models for Bakken productivity

In recent years, geologists and petroleum engineers have struggled to clearly identify the mechanisms that drive productivity in horizontal, hydraulically-fractured oil wells producing from the middle member of the Bakken formation. This paper fills a gap in the literature by showing how this play’s heterogeneity affects factors that drive well productivity. It is important because understanding the relative strength of productivity drivers and how predictors vary spatially facilitates best-practices for well site selection and well completion design. The paper describes an application of the Random Forest (RF) machine learning technique to identify these mechanisms and to evaluate their importance across 9 subareas of the North Dakota portion of the Bakken play. The study examined productivity of 7311 wells initiating production from 2010 through 2017. Well productivity varied considerably across the 9 subareas within the play, so it was not surprising that the dominant predictors, the initial 180-day water cut and the 30-day initial gas production, vary spatially to mirror local conditions that strongly affect well productivity. The relative importance of well completion predictor variables, that is, the numbers of fractures stages per well, volume of injected proppant per stage, volume of injected fluids per stage, and lateral length, varied considerably across the subareas. Statistical permutation tests are presented that generally confirm the importance rankings. Subarea Random Forest models explained from 50 percent to 82 percent of the variation in productivity test samples while the play-wide model explained 73 percent of the test sample well productivity. Weakness in the predictive ability of the Random Forest models are traced to the limited variability in the training data. Implications of the empirical findings regarding the Bakken play for operators and for research and government institutions are discussed in the concluding section.

Montana, North Dakota, South Dakota↗
USGS1976

Fracturing and subsidence of the land surface caused by the withdrawal of ground water in the Milford area, Utah

Fracturing and subsidence of the land surface in the Milford area of Utah have resulted from the decline of water levels due to pumping in unconsolidated deposits of Quaternary age. To the writers' knowledge, these are the first such effects of ground-water withdrawal reported in Utah. The fracturing is in an area about 1 mile (1.6 km) wide and 11 miles (18 km) long near Milford, in an unsaturated clay-silt zone (locally peaty at top) in the upper part of the principal ground-water reservoir. The fractures range in length from several feet to more than 100 feet (30 m), and their maximum measured depth in 1972 was 4 feet (1.2 m). Land subsidence in the Milford area is demonstrated by three lines of evidence: (1) collapse structures, (2) well casings that protrude higher above the land surface than when first placed in the borehole, and (3) lower elevations at National Ocean Survey (formerly U.S. Coast and Geodetic Survey) bench marks in 1970 than in 1908. This evidence shows that land subsidence in the Milford area is of two types, each having a different origin. One type has a near-surface origin in the clay-silt zone in the upper part of the principal groundwater reservoir, and the other is in the lower artesian aquifers of the principal ground-water reservoir. The amount of observed subsidence ranges from 0.05 foot (0.015 m) at the bench mark at Read to about 6 feet (1.8 m) at collapse structures in the Hay Springs area.

Utah↗
USGS1975

Geologic setting and chemical characteristics of hot springs in west-central Alaska

Numerous hot springs occur in a variety of geologic provinces in west-central Alaska. Granitic plutons are common to all the provinces, and the hot springs are spatially associated with the contacts of these plutons. Of 23 hot springs whose bedrock geology is known, all are within 4.8 km (3 mi) of a granitic pluton. The occurrence of hot springs, however, appears to be independent of the age, composition, or magmatic history of the pluton. Most of the analyzed hot springs appear to have chemical and isotopic compositions indicating that they were derived from deeply circulating meteoric water. About 25 percent of the analyzed hot springs show a distinct saline character with high concentrations of chloride, sodium, potassium, and calcium indicating either much more complex water-rock reactions than in the other hot springs or the addition of another type of water. Chemical geothermometers suggest subsurface temperatures in the general range of 70° to 160°C. If the hot spring waters have derived their heat solely from deep circulation, they must have reached depths of 2 to 5 km (6,000-15,000 ft), assuming geothermal gradients of 30° to 50°C/km. If a shallow igneous heat source exists in the area or if dilution or mixing has occurred, these depths may be shallower. The geologic and chemical data, although preliminary, suggest that most of the hot springs of west-central Alaska have relatively low subsurface temperatures and limited reservoir capacities in comparison with geothermal areas presently being utilized for electrical power generation. :The springs may, however, have some potential for limited power generation locally, if and when heat-exchange technology becomes available, as well as for space heating and agricultural uses.

Alaska↗
USGS1973

Aquifer diffusivity of the Ohio River alluvial aquifer by the flood-wave response method

Aquifer diffusivity (T/S) was calculated for 10 sites in the alluvial aquifer adjacent to the Ohio River by observing the response of the aquifer to a flood wave in the river. The calculated type curves matched the observed aquifer response reasonably well at eight of the 10 sites. The diffusivities ranged from 0.4 ft 2 sec -1 to 10.3 ft 2 sec -1 and were generally in agreement with diffusivity values calculated from pump-test methods at two of the sites. Interference from pumping 1/2 mile upstream from one site and localized aquifer inhomogeneity at another site precluded calculation of diffusivity. Determining the shape of the ground-water recession curve may be difficult, but it can be done satisfactorily by collecting water-level data during an extended period of ground-water discharge and transposing the average recession curve to the flood period being analyzed. The flood-wave response method for estimating aquifer diffusivity provides a relatively inexpensive technique for obtaining a significant part of the data needed to predict the aquifer's response to river and pumping stresses.

Ohio River↗
USGS2008

Hydrochemical characterization of groundwater in the Akyem area, Ghana

The Akyem area is a small farming community located in southeastern Ghana. Groundwater samples from wells in the area were analyzed for concentrations of the major ions, silica, electrical conductivity and pH. The objective was to determine the main controls on the hydrochemistry of ground-water. Mass balance modeling was used together with multivariate R-mode hierarchical cluster analysis to determine the significant sources of variation in the hydrochemistry. Two water types exist in this area. The first is influenced most by the weathering of silicate minerals from the underlying geology, and is thus rich in silica, sodium, calcium, bicarbonate, and magnesium ions. The second is water that has been influenced by the effects of fertilizers and other anthropogenic activities in the area. Mineral speciation and silicate mineral stability diagrams suggest that montmorillonite, probably derived from the incongruent dissolution of feldspars and micas, is the most stable silicate phase in the groundwaters. The apparent incongruent weathering of silicate minerals in the groundwater system has led to the enrichment of sodium, calcium, magnesium and bicarbonate ions as well as silica, leading to the supersaturation of calcite, aragonite, dolomite and quartz. Stability in the montmorillonite field suggests restricted flow conditions and a long groundwater residence time, leading to greater exposure of the rock to weathering. Cation exchange processes appear to play minor roles in the hydrochemistry of groundwater.

Journal of Environmental Hydrology↗
USGS2006

Investigating the role of gas bubble formation and entrapment in contaminated aquifers: Reactive transport modelling

In many natural and contaminated aquifers, geochemical processes result in the production or consumption of dissolved gases. In cases where methanogenesis or denitrification occurs, the production of gases may result in the formation and growth of gas bubbles below the water table. Near the water table, entrapment of atmospheric gases during water table rise may provide a significant source of O 2 to waters otherwise depleted in O 2 . Furthermore, the presence of bubbles will affect the hydraulic conductivity of an aquifer, resulting in changes to the groundwater flow regime. The interactions between physical transport, biogeochemical processes, and gas bubble formation, entrapment and release is complex and requires suitable analysis tools. The objective of the present work is the development of a numerical model capable of quantitatively assessing these processes. The multicomponent reactive transport code MIN3P has been enhanced to simulate bubble growth and contraction due to in-situ gas production or consumption, bubble entrapment due to water table rise and subsequent re-equilibration of the bubble with ambient groundwater, and permeability changes due to trapped gas phase saturation. The resulting formulation allows for the investigation of complex geochemical systems where microbially mediated redox reactions both produce and consume gases as well as affect solution chemistry, alkalinity, and pH. The enhanced model has been used to simulate processes in a petroleum hydrocarbon contaminated aquifer where methanogenesis is an important redox process. The simulations are constrained by data from a crude oil spill site near Bemidji, MN. Our results suggest that permeability reduction in the methanogenic zone due to in-situ formation of gas bubbles, and dissolution of entrapped atmospheric bubbles near the water table, both work to attenuate the dissolved gas plume emanating from the source zone. Furthermore, the simulations demonstrate that under the given conditions more than 50% of all produced CH 4 partitions to the gas phase or is aerobically oxidised near the water table, suggesting that these processes should be accounted for when assessing the rate and extent of methanogenic degradation of hydrocarbons.

Journal of Contaminant Hydrology↗
USGS1999

Predicting ground-water movement in large mine spoil areas in the Appalachian Plateau

Spoil created by surface mining can accumulate large quantities of ground-water, which can create geotechnical or regulatory problems, as well as flood active mine pits. A current study at a large (4.1 km2), thick, (up to 90 m) spoil body in eastern Kentucky reveals important factors that control the storage and movement of water. Ground-water recharge occurs along the periphery of the spoil body where surface-water drainage is blocked, as well as from infiltration along the spoil-bedrock contact, recharge from adjacent bedrock, and to a minor extent, through macropores at the spoil's surface. Based on an average saturated thickness of 6.4 m for all spoil wells, and assuming an estimated porosity of 20%, approximately 5.2 x 106 m3 of water is stored within the existing 4.1 km2 of reclaimed spoil. A conceptual model of ground-water flow, based on data from monitoring wells, dye-tracing data, discharge from springs and ponds, hydraulic gradients, chemical data, field reconnaissance, and aerial photographs indicate that three distinct but interconnected saturated zones have been established: one in the spoil's interior, and others in the valley fills that surround the main spoil body at lower elevations. Ground-water movement is sluggish in the spoil's interior, but moves quickly through the valley fills. The conceptual model shows that a prediction of ground-water occurrence, movement, and quality can be made for active or abandoned spoil areas if all or some of the following data are available: structural contour of the base of the lowest coal seam being mined, pre-mining topography, documentation of mining methods employed throughout the mine, overburden characteristics, and aerial photographs of mine progression.Spoil created by surface mining can accumulate large quantities of ground-water, which can create geotechnical or regulatory problems, as well as flood active mine pits. A current study at a large (4.1 km2), thick, (up to 90 m) spoil body in eastern Kentucky reveals important factors that control the storage and movement of water. Ground-water recharge occurs along the periphery of the spoil body where surface-water drainage is blocked, as well as from infiltration along the spoil-bedrock contact, recharge from adjacent bedrock, and to a minor extent, through macropores at the spoil's surface. Based on an average saturated thickness of 6.4 m for all spoil wells, and assuming an estimated porosity of 20%, approximately 5.2 ?? 106 m3 of water is stored within the existing 4.1 km2 of reclaimed spoil. A conceptual model of ground-water flow, based on data from monitoring wells, dye-tracing data, discharge from springs and ponds, hydraulic gradients, chemical data, field reconnaissance, and aerial photographs indicate that three distinct but interconnected saturated zones have been established: one in the spoil's interior, and others in the valley fills that surround the main spoil body at lower elevations. Ground-water movement is sluggish in the spoil's interior, but moves quickly through the valley fills. The conceptual model shows that a prediction of ground-water occurrence, movement, and quality can be made for active or abandoned spoil areas if all or some of the following data are available: structural contour of the base of the lowest coal seam being mined, pre-mining topography, documentation of mining methods employed throughout the mine, overburden characteristics, and aerial photographs of mine progression.

International Journal of Coal Geology↗
USGS1995

The role of palynology in paleoecological analyses of Tertiary coals

Pollen, spores, and other plant microfossils are important constituents of Tertiary coals, both as petrographic components (the maceral sporinite) and as distinctive indicators of the nature of the depositional environment in which the coal-forming peat accumulated. Palynological analyses, which have been conducted on Tertiary coals since the 1930's, play an increasingly important role in modern paleoecological analyses of coals. Among the most important factors controlling the petrographic composition and facies characteristics of coal deposits are the types and relative abundances of plants that composed the peat. At present, wetland environments in which peat accumulates (mires) range from marshes and bogs to forested swamps; each is inhabited by distinctive plant communities. These plant communities are associated with varied conditions of climate, water depth, chemistry, and nutrient supply, and the floras can be indicative of these conditions. In the Tertiary Period, plant communities of mires were also highly diverse and specialized (especially as compared with those of the Carboniferous). The dominant species in some Paleocene mire floras were gymnosperms, but continuing a trend begun in Late Cretaceous time, angiosperms became increasingly prominent through the Tertiary. The diverse: angiosperm-dominated mire floras produced coals that vary significantly in facies and hence in quality. Such contrasts are evident in contemporaneous coals from different paleolatitudes, as well as among, coals of different ages within the Tertiary, as exemplified by selected deposits in the western United. States. The palynofloras of these coals reflect the floristic composition of the plant communities of the ancient mires.

International Journal of Coal Geology↗
USGS2004

Importance of storm events in controlling ecosystem structure and function in a Florida Gulf Coast estuary

From 8/95 to 2/01, we investigated the ecological effects of intra- and inter-annual variability in freshwater flow through Taylor Creek in southeastern Everglades National Park. Continuous monitoring and intensive sampling studies overlapped with an array of pulsed weather events that impacted physical, chemical, and biological attributes of this region. We quantified the effects of three events representing a range of characteristics (duration, amount of precipitation, storm intensity, wind direction) on the hydraulic connectivity, nutrient and sediment dynamics, and vegetation structure of the SE Everglades estuarine ecotone. These events included a strong winter storm in November 1996, Tropical Storm Harvey in September 1999, and Hurricane Irene in October 1999. Continuous hydrologic and daily water sample data were used to examine the effects of these events on the physical forcing and quality of water in Taylor Creek. A high resolution, flow-through sampling and mapping approach was used to characterize water quality in the adjacent bay. To understand the effects of these events on vegetation communities, we measured mangrove litter production and estimated seagrass cover in the bay at monthly intervals. We also quantified sediment deposition associated with Hurricane Irene's flood surge along the Buttonwood Ridge. These three events resulted in dramatic changes in surface water movement and chemistry in Taylor Creek and adjacent regions of Florida Bay as well as increased mangrove litterfall and flood surge scouring of seagrass beds. Up to 5 cm of bay-derived mud was deposited along the ridge adjacent to the creek in this single pulsed event. These short-term events can account for a substantial proportion of the annual flux of freshwater and materials between the mangrove zone and Florida Bay. Our findings shed light on the capacity of these storm events, especially when in succession, to have far reaching and long lasting effects on coastal ecosystems such as the estuarine ecotone of the SE Everglades.

Journal of Coastal Research↗
USGS2015

Fecal indicator and pathogenic bacteria and their antibiotic resistance in alluvial groundwater of an irrigated agricultural region with dairies

Surveys of microbiological groundwater quality were conducted in a region with intensive animal agriculture in California, USA. The survey included monitoring and domestic wells in eight concentrated animal feeding operations (CAFOs) and 200 small (domestic and community supply district) supply wells across the region. Campylobacter was not detected in groundwater, whereas Escherichia coli O157:H7 and Salmonella were each detected in 2 of 190 CAFO monitoring well samples. Nonpathogenic generic E. coli and Enterococcus spp. were detected in 24.2% (46/190) and 97.4% (185/190) groundwater samples from CAFO monitoring wells and in 4.2% (1/24) and 87.5% (21/24) of CAFO domestic wells, respectively. Concentrations of both generic E. coli and Enterococcus spp. were significantly associated with well depth, season, and the type of adjacent land use in the CAFO. No pathogenic bacteria were detected in groundwater from 200 small supply wells in the extended survey. However, 4.5 to 10.3% groundwater samples were positive for generic E. coli and Enterococcus. Concentrations of generic E. coli were not significantly associated with any factors, but concentrations of Enterococcus were significantly associated with proximity to CAFOs, seasons, and concentrations of potassium in water. Among a subset of E. coli and Enterococcus isolates from both surveys, the majority of E. coli (63.6%) and Enterococcus (86.1%) isolates exhibited resistance to multiple (≥3) antibiotics. Findings confirm significant microbial and antibiotic resistance loading to CAFO groundwater. Results also demonstrate significant attenuative capacity of the unconfined alluvial aquifer system with respect to microbial transport.

California↗
USGS2006

Survival of largemouth bass from populations infected with largemouth bass virus and subjected to simulated tournament conditions

Mortality was measured for largemouth bass Micropterus salmoides in simulated tournaments conducted at 26??C to determine whether an easily accomplished live-well management protocol reduced mortality. Treatment fish, which received the live-well management protocol, were held for 8 h in live wells at 23??C with water containing more than 5 mg of dissolved oxygen/L and 0.3% salt (NaCl). Control fish, were confined for 8 h in live wells at 26??C (ambient temperature) with dissolved oxygen fluctuating from 3 to 5 mg/L and no salt, which simulated the live-well management practices used by largemouth bass tournament anglers. Mortality after live-well confinement was 0% for both treatment and control fish, and mortality during the first 24 h after the simulated tournaments was 2.5%. Mortality of fish observed for up to 5 d after the simulated tournaments was high for treatment fish (mean = 75%; SE = 16%) and control fish (mean = 85%; SE = 11%), and we conclude that the treatment conditions did not reduce postrelease mortality. We suggest that the unusually high posttournament mortality was related to largemouth bass virus infections. ?? Copyright by the American Fisheries Society 2006.

North American Journal of Fisheries Management↗