Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS1998

Depth of the base of the Jackson aquifer, based on geophysical exploration, southern Jackson Hole, Wyoming, USA

A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming.

Wyoming↗
USGS1987

Normal faulting of the Daiichi-Kashima Seamount in the Japan Trench revealed by the Kaiko I cruise, Leg 3

A detailed topographic and geophysical survey of the Daiichi-Kashima Seamount area in the southern Japan Trench, northwestern Pacific margin, clearly defines a high-angle normal fault which splits the seamount into two halves. A fan-shaped zone was investigated along 2–4 km spaced, 100 km long subparallel tracks using narrow multi-beam (Seabeam) echo-sounder with simultaneous measurements of gravity, magnetic total field and single-channel seismic reflection records. Vertical displacement of the inboard half was clearly mapped and its normal fault origin was supported. The northern and southern extensions of the normal fault beyond the flank of the seamount were delineated. Materials on the landward trench slope are displaced upward and to sideways away from the colliding seamount. Canyons observed in the upper landward slope terminate at the mid-slope terrace which has been uplifted since start of subduction of the seamount. Most of the landward slope except for the landward walls aside the seamount comprises only a landslide topography in a manner similar to the northern Japan Trench wall. This survey was conducted on R/V “Jean Charcot” as a part of the Kaiko I cruise, Leg 3, in July–August 1984 under the auspices of the French-Japanese scientific cooperative program.

Earth and Planetary Science Letters↗
USGS1988

Seabeam and seismic reflection imaging of the tectonic regime of the Andean continental margin off Peru (4°S to 10°S)

Marine geophysical surveys employing Seabeam, multi- and single-channel seismic reflection, gravity and magnetic instruments were conducted at two locations along the continental slope of the Peru Trench during the Seaperc cruise of the R/V “Jean Charcot” in July 1986. These areas are centered around 5°30′S and 9°30′S off the coastal towns of Paita and Chimbote respectively. These data indicate that (1) the continental slope off Peru consists of three distinct morpho-structural domains (from west to east are the lower, middle and upper slopes) instead of just two as previously reported; (2) the middle slope has the characteristics of a zone of tectonic collapse at the front of a gently flexured upper slope; (3) the upper half of the lower slope appears to represent the product of mass wasting; (4) thrusting at the foot of the margin produces a continuous morphologic feature representing a deformation front where the products of mass-wasting are overprinted by a compressional tectonic fabric; (5) a change in the tectonic regime from tensional to compressional occurs at the mid-slope-lower slope boundary, the accretionary prism being restricted to the very base of the lower slope in the Paita area. The Andean margin off Peru is an “extensional active margin” or a “collapsing active margin” developing a subordinated accretionary complex induced by massive collapse of the middle slope area.

Earth and Planetary Science Letters↗
USGS1968

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗
USGS2013

Geomorphic characterization of four shelf-sourced submarine canyons along the U.S. Mid-Atlantic continental margin

Shelf-sourced submarine canyons are common features of continental margins and are fundamental to deep-sea sedimentary systems. Despite their geomorphic and geologic significance, relatively few passive margin shelf-breaching canyons worldwide have been mapped using modern geophysical methods. Between 2007 and 2012 a series of geophysical surveys was conducted across four major canyons of the US Mid-Atlantic margin: Wilmington, Baltimore, Washington, and Norfolk canyons. More than 5700 km 2 of high-resolution multibeam bathymetry and 890 line-km of sub-bottom CHIRP profiles were collected along the outer shelf and uppermost slope (depths of 80-1200 m). The data allowed us to compare and contrast the fine-scale morphology of each canyon system. The canyons have marked differences in the morphology and orientation of canyon heads, steepness and density of sidewall gullies, and the character of the continental shelf surrounding canyon rims. Down-canyon axial profiles for Washington, Baltimore and Wilmington canyons have linear shapes, and each canyon thalweg exhibits morphological evidence for recent, relatively small-scale sediment transport. For example, Washington Canyon displays extremely steep wall gradients and contains ~100 m wide, 5–10 m deep, v-shaped incisions down the canyon axis, suggesting modern or recent sediment transport. In contrast, the convex axial thalweg profile, the absence of thalweg incision, and evidence for sediment infilling at the canyon head, suggest that depositional processes strongly influence Norfolk Canyon during the current sea-level high-stand. The north walls of Wilmington, Washington and Norfolk canyons are steeper than the south walls due to differential erosion, though the underlying cause for this asymmetry is not clear. Furthermore, we speculate that most of the geomorphic features observed within the canyons (e.g., terraces, tributary canyons, gullies, and hanging valleys) were formed during the Pleistocene, and show only subtle modification by Holocene processes active during the present sea-level high-stand.

Cape Hatteras;Georges Bank;Hudson Canyon↗
USGS2022

Tungsten skarn potential of the Yukon-Tanana Upland, eastern Alaska, USA—A mineral resource assessment

Tungsten (W) is used in a variety of industrial and technological applications and has been identified as a critical mineral for the United States, India, the European Union, and other countries. These countries rely on W imports mostly from China, which leaves them vulnerable to supply disruption. Consequently, the U.S. government has a current initiative to understand domestic resource potential. The eastern Alaska portion of the Yukon-Tanana Upland (YTU), is prospective for W skarn deposits, the major source of global W supply. The regional geology consists of juxtaposed Paleozoic lithotectonic packages that were reaccreted to North America in the Mesozoic . Multiple subsequent episodes of arc-related magmatism intruded the lithotectonic packages, accompanied by W skarn formation mostly associated with 100–90 Ma intrusions; major W skarn deposits in Canada are part of the same metallogenic event (e.g., Mactung, Cantung). In this paper, we present an assessment for undiscovered W skarn resources for parts of the lesser-explored western (Alaskan) portion of the YTU. We used GIS proximity analysis to map the intersection of pluton and carbonate-bearing rocks to define three permissive tracts for W skarn deposits. The permissive tracts were qualitatively assessed by mineral potential mapping using region-wide sediment geochemistry and mineral concentrate datasets. This analysis showed that much of the western YTU has high potential for undiscovered W skarn deposits, whereas the eastern and southern YTU had only isolated areas of medium to high potential. Historical production and the quality of the geochemistry data of the western YTU tract (ca. 9200 km 2 ) permitted a quantitative assessment of undiscovered W resources. Probabilistic estimates by a panel of 20 experts predicted a 70% chance of one to three undiscovered W skarn deposits in the western YTU tract. The rationale for favorability employed by the expert panel included favorable lithology, previous production, clustering of previously mined deposits, W placers in the area, lack of recent exploration, pan concentrates containing W minerals, and W geochemical anomalies. Estimates were combined with a global grade and tonnage model for W skarns in a Monte Carlo simulation and provided a median estimate of undiscovered resources of 94 kt WO 3 . If the undiscovered W skarn deposits are located close to infrastructure (e.g., near Fairbanks, or close to roads and/or power grid), application of an economic filter indicates that the median total economically recoverable WO 3 is 63 kt with a net present value (NPV) of $330 million USD (2008 dollars). Whereas if deposits are far from infrastructure, median recoverable WO 3 is only 30 kt and the NPV is $44 million. Our models for contained WO 3 resources and NPV estimates for the western YTU tract are considerably lower than the known resources in skarns in adjacent areas in Canada. Estimates for the western YTU are also lower than preliminary estimates for undiscovered W skarn deposits in areas of the western conterminous United States. We speculate that lower permeability and continuity of favorable carbonate rock horizons in the relatively higher-grade metamorphic country rocks in the Alaska portion of the YTU may explain some of the differences in prospectivity. More detailed geologic mapping, modern geochemistry, and geophysical surveys are needed to refine the resource potential of the whole YTU. Regardless, quantitative mineral resource assessment provides a useful tool for making first-order regional estimates of undiscovered resources, identifying target areas for new data acquisition, and guiding research on the fundamental controls of district-scale metallogenic endowments.

Alaska↗
USGS2023

Assessment of resource potential from mine tailings using geostatistical modeling for compositions: A methodology and application to Katherine Mine site, Arizona, USA

The mining industry, in most cases, targets a specific valuable commodity that is present in small quantities within large volumes of extracted material. After milling and processing, most of the extracted material and the effluents are stored as waste (tailings) in impoundments, such as dams or waste dumps, or are backfilled into underground mines. In time, tailing materials may become an issue of environmental and health concern due to the hazardous elements, ions, and oxides contained within the waste material. In addition, handling and storage of such waste in dams may pose the risk of dam failure with catastrophic consequences to nature and nearby communities. On the other hand, tailings may offer potential as secondary sources of critical elements (CEs), including rare earth elements (REEs), which may have been overlooked during primary production and processing. Therefore, treating mine tailings as a resource has economic and environmental benefits by reducing the waste from new and historical mine sites through remining. One of the critical steps for taking advantage of these benefits is to spatially quantify the resources and the pollutants, which require the application of adequate data analysis and modeling methods, often to compositional geochemical data. Utilizing adequate methods is especially important for correctly quantifying resource potential, as the quantities will often be at low concentrations. This work presents quantification of resource potential (Au, Ag, Cu, Zn, Pb) and elements of environmental concern (Hg and As) from the tailings of a historic mine site, Katherine Mine, AZ, USA. Data reported by the U.S. Bureau of Mines (USBM) after extensive field campaigns in the 1990s, including sampling from tailing impoundment and surrounding areas for geochemical characterization and geophysical surveys, were used. First, compositional data (CoDa) analysis was employed to explore associations of sampling locations, geochemical parts, and the clustering of samples. Next, sequential Gaussian simulation (SGSIM) was applied to samples that showed a genetic link to tailing material after isometric log-ratio transformation (ilr) and mix/max autocorrelation factor (MAF) transformation for spatial modeling and uncertainty evaluation. Geostatistical results revealed spatial variability of concentrations within the tailing area. Uncertainty evaluation based on realizations indicated that Cu (14.27–20.01 t), Zn (44.23–76.23 t), and Pb (22.56–38.28 t) are the most abundant elements within a 5 %–95 % interval, followed by Ag and Au (~5.3 and 0.18 t, at 50th percentile), respectively. Of the elements of health concern, As was found to be ~4.8 t (50th percentile) in the tailing area. The work also showed that ~0.51 t As, 0.005 t Hg, 0.020 t of Au, and 0.62 t of Ag were carried to Lake Mohave by an ephemeral stream called Katherine Wash, which transects the tailings.

Arizona↗
USGS2006

Submarine geology of Hana Ridge and Haleakala Volcano's northeast flank, Maui

We present a morphostructural analysis of the submarine portions of Haleakala Volcano and environs, based upon a 4-year program of geophysical surveys and submersible explorations of the underwater flanks of Hawaiian volcanoes that was conducted by numerous academic and governmental research organizations in Japan and the U.S. and funded primarily by the Japan Agency for Marine–Earth Science and Technology. A resulting reconnaissance geologic map features the 135-km-long Hana Ridge, the 3000 km 2 Hana slump on the volcano's northeast flank, and island-surrounding terraces that are the submerged parts of volcanic shields. Hana Ridge below 2000 m water depth exhibits the lobate morphology typical of the subaqueously erupted parts of Hawaiian rift zones, with some important distinctions: namely, subparallel crestlines, which we propose result from the down-rift migration of offsets in the dike intrusion zone, and an amphitheater at its distal toe, where a submarine landslide has embayed the ridge tip. Deformation of Haleakala's northeast flank is limited to that part identified as the Hana slump, which lies downslope from the volcano's submerged shield, indicating that flank mobility is also limited in plan, inconsistent with hypothesized volcanic spreading driven by rift-zone dilation. The leading edge of the slump has transverse basins and ridges that resemble the thrust ramps of accretionary prisms, and we present a model to describe the slump's development that emphasizes the role of coastally generated fragmental basalt on gravitational instability of Haleakala's northeast flank and that may be broadly applicable to other ocean-island slumps.

Hawai'i↗
USGS2009

Far field tsunami simulations of the 1755 Lisbon earthquake: Implications for tsunami hazard to the U.S. East Coast and the Caribbean

The great Lisbon earthquake of November 1st, 1755 with an estimated moment magnitude of 8.5-9.0 was the most destructive earthquake in European history. The associated tsunami run-up was reported to have reached 5-15??m along the Portuguese and Moroccan coasts and the run-up was significant at the Azores and Madeira Island. Run-up reports from a trans-oceanic tsunami were documented in the Caribbean, Brazil and Newfoundland (Canada). No reports were documented along the U.S. East Coast. Many attempts have been made to characterize the 1755 Lisbon earthquake source using geophysical surveys and modeling the near-field earthquake intensity and tsunami effects. Studying far field effects, as presented in this paper, is advantageous in establishing constraints on source location and strike orientation because trans-oceanic tsunamis are less influenced by near source bathymetry and are unaffected by triggered submarine landslides at the source. Source location, fault orientation and bathymetry are the main elements governing transatlantic tsunami propagation to sites along the U.S. East Coast, much more than distance from the source and continental shelf width. Results of our far and near-field tsunami simulations based on relative amplitude comparison limit the earthquake source area to a region located south of the Gorringe Bank in the center of the Horseshoe Plain. This is in contrast with previously suggested sources such as Marqu??s de Pombal Fault, and Gulf of C??diz Fault, which are farther east of the Horseshoe Plain. The earthquake was likely to be a thrust event on a fault striking ~ 345?? and dipping to the ENE as opposed to the suggested earthquake source of the Gorringe Bank Fault, which trends NE-SW. Gorringe Bank, the Madeira-Tore Rise (MTR), and the Azores appear to have acted as topographic scatterers for tsunami energy, shielding most of the U.S. East Coast from the 1755 Lisbon tsunami. Additional simulations to assess tsunami hazard to the U.S. East Coast from possible future earthquakes along the Azores-Iberia plate boundary indicate that sources west of the MTR and in the Gulf of Cadiz may affect the southeastern coast of the U.S. The Azores-Iberia plate boundary west of the MTR is characterized by strike-slip faults, not thrusts, but the Gulf of Cadiz may have thrust faults. Southern Florida seems to be at risk from sources located east of MTR and South of the Gorringe Bank, but it is mostly shielded by the Bahamas. Higher resolution near-shore bathymetry along the U.S. East Coast and the Caribbean as well as a detailed study of potential tsunami sources in the central west part of the Horseshoe Plain are necessary to verify our simulation results. ?? 2008 Elsevier B.V.

Marine Geology↗
USGS1999

Geometry and significance of stacked gullies on the northern California slope

Recent geophysical surveys off northern California reveal patterns of gullies on the sea floor and preserved within continental-slope deposits that represent both erosional and aggradational processes. These surveys, conducted as part of the STRATAFORM project, combined multibeam bathymetry and backscatter with high-resolution seismic profiles. These data provide a new basis for evaluating gully morphology, distribution, and their significance to slope sedimentation and evolution. The continental margin off northern California exhibits an upper slope that has undergone both progradation and aggradation. The slope surface, which dips at <2??to 4.0??, contains a set of straight, evenly spaced, and parallel to sub-parallel gullies that begin at the 380-m isobath and extend onto the Eel and Klamath plateaus and into Trinity Canyon. The surface gullies are typically 100-m wide or more and only 1-2 m deep. The gullied slope is underlain by a sedimentary sequence that contains abundant buried gullies to subsurface depths of over 150 m. Although some of the buried gullies are distinctly erosional, most are part of the aggradational pattern responsible for the overall growth of the slope. The latest phase of gully erosion is marked by a gullied surface lying <20 m below the present-day sea floor. These erosional gullies locally truncate individual reflectors, have small depositional levees, and exhibit greater relief than do overlying gullies exposed on the sea floor. The older subsurface gullies document a period of widespread, but minor, erosion and downslope transport, presumably from a large, proximal sediment source. The cycles of downcutting and gully excavation are a minor part of the stratigraphic section, and are likely related to the combined influence of lower sea levels and higher sediment yields. During aggradation of the slope depositional sequences, sediment was draped over the gully features, producing sediment layers that mimic the underlying gully form. Consequently, gully morphology and geometries were preserved and migrated upwards with time. The processes that produce aggraded gully drape also resulted in laterally continuous strata and were most likely related to a period when the sediment source was dispersed from a more distal (10s of km) source, such as during present conditions. The draped sequences also contain a few new gullies, which indicates that gullies can be initiated at all or most stages of slope growth.

Marine Geology↗
USGS1999

Crustal and lithospheric structure of the west Antarctic Rift System from geophysical investigations: A review

The active West Antarctic Rift System, which extends from the continental shelf of the Ross Sea, beneath the Ross Ice Shelf and the West Antarctic Ice Sheet, is comparable in size to the Basin and Range in North America, or the East African rift systems. Geophysical surveys (primarily marine seismic and aeromagnetic combined with radar ice sounding) have extended the information provided by sparse geologic exposures and a few drill holes over the ice and sea covered area. Rift basins developed in the early Cretaceous accompanied by the major extension of the region. Tectonic activity has continued episodically in the Cenozoic to the present, including major uplift of the Transantarctic Mountains. The West Antarctic ice sheet, and the late Cenozoic volcanic activity in the West Antarctic Rift System, through which it flows, have been coeval since at least Miocene time. The rift is characterized by sparse exposures of late Cenozoic alkaline volcanic rocks extending from northern Victoria Land throughout Marie Byrd Land. The aeromagnetic interpretations indicate the presence of > 5 x 105 km2 (> 106 km3) of probable late Cenozoic volcanic rocks (and associated subvolcanic intrusions) in the West Antarctic rift. This great volume with such limited exposures is explained by glacial removal of the associated late Cenozoic volcanic edifices (probably hyaloclastite debris) concomitantly with their subglacial eruption. Large offset seismic investigations in the Ross Sea and on the Ross Ice Shelf indicate a ~ 17-24-km-thick, extended continental crust. Gravity data suggest that this extended crust of similar thickness probably underlies the Ross Ice Shelf and Byrd Subglacial Basin. Various authors have estimated maximum late Cretaceous-present crustal extension in the West Antarctic rift area from 255-350 km based on balancing crustal thickness. Plate reconstruction allowed < 50 km of Tertiary extension. However, paleomagnetic measurements suggested about 1000 km of post-middle Cretaceous translation between East Antarctica and Pacific West Antarctica. Because a great amount of crustal extension in late Cenozoic time is unlikely, alternate mechanisms have been proposed for the late Cenozoic volcanism. Its vast volume and the ocean island basalt chemistry of the exposed late Cenozoic alkaline volcanic rocks were interpreted as evidence for a mantle plume head. An alternative or supplemental explanation to the mantle plume hypothesis is significantly greater lower lithosphere (mantle) stretching resulting in greater decompression melting than the limited Cenozoic crustal extension allows. Because of very slow rates of late Cenozoic extension in the West Antarctic Rift System, the amount of advected heat is small compared with the conductive heat. Therefore, phase transition probably would not explain the large subsidence with low extension observed in the West Antarctic Rift System.

Global and Planetary Change↗
USGS2023

Discovery of an active forearc fault in an urban region: Holocene rupture on the XEOLXELEK-Elk Lake fault, Victoria, British Columbia, Canada

Subduction forearcs are subject to seismic hazard from upper plate faults that are often invisible to instrumental monitoring networks. Identifying active faults in forearcs therefore requires integration of geomorphic, geologic, and paleoseismic data. We demonstrate the utility of a combined approach in a densely populated region of Vancouver Island, Canada, by combining remote sensing, historical imagery, field investigations, and shallow geophysical surveys to identify a previously unrecognized active fault, the XEOLXELEK-Elk Lake fault, in the northern Cascadia forearc, ∼10 km north of the city of Victoria. Lidar-derived digital terrain models and historical air photos show a ∼2.5-m-high scarp along the surface of a Quaternary drumlinoid ridge. Paleoseismic trenching and electrical resistivity tomography surveys across the scarp reveal a single reverse-slip earthquake produced a fault-propagation fold above a blind southwest-dipping fault. Five geologically plausible chronological models of radiocarbon dated charcoal constrain the likely earthquake age to between 4.7 and 2.3 ka. Fault-propagation fold modeling indicates ∼3.2 m of reverse slip on a blind, 50° southwest-dipping fault can reproduce the observed deformation. Fault scaling relations suggest a M 6.1–7.6 earthquake with a 13 to 73-km-long surface rupture and 2.3–3.2 m of dip slip may be responsible for the deformation observed in the paleoseismic trench. An earthquake near this magnitude in Greater Victoria could result in major damage, and our results highlight the importance of augmenting instrumental monitoring networks with remote sensing and field studies to identify and characterize active faults in similarily challenging environments.

Victoria↗
USGS2010

Characterization of a high-transmissivity zone by well test analysis: Steady state case

A method is developed to analyze steady horizontal flow to a well pumped from a confined aquifer composed of two homogeneous zones with contrasting transmissivities. Zone 1 is laterally unbounded and encloses zone 2, which is elliptical in shape and is several orders of magnitude more transmissive than zone 1. The solution for head is obtained by the boundary integral equation method. Nonlinear least squares regression is used to estimate the model parameters, which include the transmissivity of zone 1, and the location, size, and orientation of zone 2. The method is applied to a hypothetical aquifer where zone 2 is a long and narrow zone of vertical fractures. Synthetic data are generated from three different well patterns, representing different areal coverage and proximity to the fracture zone. When zone 1 of the hypothetical aquifer is homogeneous, the method correctly estimates all model parameters. When zone 1 is a randomly heterogeneous transmissivity field, some parameter estimates, especially the length of zone 2, become highly uncertain. To reduce uncertainty, the pumped well should be close to the fracture zone, and surrounding observation wells should cover an area similar in dimension to the length of the fracture zone. Some prior knowledge of the fracture zone, such as that gained from a surface geophysical survey, would greatly aid in designing the well test.

Water Resources Research↗
USGS2009

What is a picture worth? A history of remote sensing

Remote sensing is the use of electromagnetic energy to measure the physical properties of distant objects. It includes photography and geophysical surveying as well as newer techniques that use other parts of the electromagnetic spectrum. The history of remote sensing begins with photography. The origin of other types of remote sensing can be traced to World War II, with the development of radar, sonar, and thermal infrared detection systems. Since the 1960s, sensors have been designed to operate in virtually all of the electromagnetic spectrum. Today a wide variety of remote sensing instruments are available for use in hydrological studies; satellite data, such as Skylab photographs and Landsat images are particularly suitable for regional problems and studies. Planned future satellites will provide a ground resolution of 10–80 m. Remote sensing is currently used for hydrological applications in most countries of the world. The range of applications includes groundwater exploration determination of physical water quality, snowfield mapping, flood-inundation delineation, and making inventories of irrigated land. The use of remote sensing commonly results in considerable hydrological information at minimal cost. This information can be used to speed-up the development of water resources, to improve management practices, and to monitor environmental problems.

Hydrological Sciences Bulletin↗
USGS2020

Modeling groundwater inflow to the new crater lake at Kīlauea Volcano, Hawaiʻi

During the 2018 eruption of Kīlauea Volcano, Hawai'i, scientists relied heavily on a conceptual model of explosive eruptions triggered when lava‐lake levels drop below the water table. Numerical modeling of multiphase groundwater flow and heat transport revealed that, contrary to expectations, liquid water inflow to the drained magma conduit would likely be delayed by months to years, owing to the inability of liquid water to transit a zone of very hot rock. The summit of Kīlauea subsequently experienced an ∼2‐month period of consistent repeated collapses, and the crater now extends below the equilibrium position of the water table. Liquid water first emerged into the deepened crater in late July 2019. The timing of first appearance of liquid water (about 14 months postcollapse) and the rate of crater lake filling (currently ∼27 kg/s) were well‐predicted by the numerical modeling done in late spring 2018, which forecast liquid inflow after 3 to 24 months at rates of 10 to 100 kg/s. A second‐generation groundwater model, reflecting the current crater geometry, forecasts lake filling over the next several years. The successful 2018 to present forecasts with both models are based on unadjusted in situ permeability estimates (1 to 6 × 10 −14 m 2 ) and water‐table elevations (600 to 800 m) from a nearby research drillhole and geophysical surveys. Important unknowns that affect the reliability of longer‐term forecasts include the equilibrium water‐table geometry, the rate of evaporation from the hot and growing crater lake (currently ∼29,000 m 2 at 70‐80 °C), and heterogenous permeability changes caused by the 2018 collapse.

Hawaii↗
USGS2010

Inherent Limitations of Hydraulic Tomography

We offer a cautionary note in response to an increasing level of enthusiasm regarding high-resolution aquifer characterization with hydraulic tomography. We use synthetic examples based on two recent field experiments to demonstrate that a high degree of nonuniqueness remains in estimates of hydraulic parameter fields even when those estimates are based on simultaneous analysis of a number of carefully controlled hydraulic tests. We must, therefore, be careful not to oversell the technique to the community of practicing hydrogeologists, promising a degree of accuracy and resolution that, in many settings, will remain unattainable, regardless of the amount of effort invested in the field investigation. No practically feasible amount of hydraulic tomography data will ever remove the need to regularize or bias the inverse problem in some fashion in order to obtain a unique solution. Thus, along with improving the resolution of hydraulic tomography techniques, we must also strive to couple those techniques with procedures for experimental design and uncertainty assessment and with other more cost-effective field methods, such as geophysical surveying and, in unconsolidated formations, direct-push profiling, in order to develop methods for subsurface characterization with the resolution and accuracy needed for practical field applications. Copyright ?? 2010 The Author(s). Journal compilation ?? 2010 National Ground Water Association.

Ground Water↗
USGS1974

Structure of the continental margin of Liberia, West Africa

Geophysical surveys made by R/V Unitedgeo I (USGS–IDOE Cruise Leg 5), combined with earlier surveys and available geologic information, provide the basis for interpreting the structure of the continental margin of Liberia. This area lies at the junction of the Americas and Africa in published reconstructions of Gondwanaland prior to the opening of the North and South Atlantic in Jurassic and Cretaceous time, respectively. Three fracture zones (St. Paul, Cape Palmas, and Grand Cess) are inferred in the area southeast of 9°30′ W. on the basis of magnetic and gravity data, which is supported by bathymetric and seismic reflection data. The three fracture zones appear to exist as separate lineaments near the African coast. Farther seaward, they may be part of the same transform fault crossing the Atlantic (St. Paul fracture zone). The magnetic anomalies associated with these fracture zones, which may have originated in Cretaceous time at the opening of the South Atlantic, are continuous with magnetic anomalies over crust of Eburnean age (∼2,000 m.y.) in southeast Liberia and its continental shelf. This suggests that Eburnean age structures may have been zones of weakness that were reactivated in Cretaceous time. A positive gravity anomaly (∼50 mgal) along the coast and continental shelf of Liberia is attributed to deep crustal rocks that were uplifted and exposed in Pan-African time (∼550 m.y.). The land boundary of this anomaly coincides with a shear zone that marks the boundary between the Pan-African and the Liberian age province (∼2,700 m.y.); the shearing (in a thrust-fault sense) may be the result of compressive stress associated with the closing of a proto-Atlantic ocean. Liberian age magnetic anomalies in the area northwest of 9°30′ W. cross the Pan-African province (and the positive coastal gravity anomaly) and continue over the continental shelf and slope to about the 3,000-m bathymetric contour; the seaward limit of the anomalies is interpreted as representing the seaward limit of the old continental crust. This westward extension of the continental crust does not completely fill the gap in fit in various published reconstructions of Gondwanaland, and we suggest that the northern Florida block may have been located near the Liberian margin at one time. Magnetic data indicate a thick section of sedimentary rock, possibly as great as 8 km, on the continental slope. Comparison of gravity data over magnetically inferred basins in the shelf, slope, and rise suggests that low-density sedimentary rocks constitute a greater proportion of the section in basins beneath the shelf and beneath the slope and rise northwest of 9°30' W. than beneath the slope and rise in the area of the fracture zones. The gravitational attraction that corresponds to a crust-mantle boundary dipping 45° to 60° can be computed to fit observed data – as might be expected at a rifted continental margin. A shallow high-density block beneath the coast and continental shelf is required to fit the coastal positive anomaly; this block is represented by exposures on land of granulite-grade metamorphic rock of the Pan-African province.

Atlantic Ocean↗
USGS1993

Seismic reflection profiling across Tertiary extensional structures in the eastern Amargosa Desert, southern Nevada, Basin and Range province

Outcrops, shallow well control, and coincident geophysical surveys are used to interpret a seismic reflection profile in the Amargosa Desert, within the Basin and Range province, of southern Nevada. The east-west-trending, 27-km-long seismic line crosses all or parts of three Tertiary subbasins, revealing that basin growth occurred by progressive shifts of basin-bounding faults. The reflection line images Tertiary strata that is rotated by steeply dipping listric faults and that noses into normal faults. A shallow (less than 100 to 200 m deep), laterally continuous, flat-lying, low-frequency reflector, interpreted as a Tertiary basalt flow, suggests that little vertical deformation has occurred within the easternmost of the small Tertiary basins since the eruption of the flow about 10 million years ago. Moderately dipping reflections within the pre-Tertiary bedrock may image Mesozoic thrust faults. The reflection data indicate that, whereas the top of the reflective lower crust shallows to the west, possibly in the direction of increasing crustal extension, the Moho is relatively flat between 30 and 33 km deep. Apparent bright-spot reflections from the lower crust are interpreted as evidence for ductile shearing of the lower crust, not for active magma chambers. Doming of the lower crust resembles that observed elsewhere in the Basin and Range province and is consistent with ductile flow in the lower crust.

Geological Society of America Bulletin↗