SEARCH · Geology Reports

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

USGS2019

Sediment and organic carbon transport and deposition driven by internal tides along Monterey Canyon, offshore California

Submarine canyons provide globally important conduits for sediment and organic carbon transport into the deep-sea. Using a novel dataset from Monterey Canyon, offshore central California, that includes an extensive array of water column sampling devices, we address how fine-grained sediment and organic carbon are transported, mixed, fractionated, and buried along a submarine canyon. Anderson-type sediment traps were deployed 10 to 300 meters above the seafloor on moorings anchored between 278–1849 m water depths along the axial channel of Monterey Canyon during three consecutive 6-month deployments (2015–2017). Tidal currents within the canyon suspended and transported fine-grained sediment and organic carbon that were captured in sediment traps, which show apparent patterns and composition of sediment and organic carbon transport along the canyon. High sediment accumulation rates in traps increased up-canyon and near the seafloor with fine-scale (<1 cm) layering that was increasingly distinctive in CT scans. There was no along-canyon trend in the organic carbon composition (percent modern carbon and isotopic signatures) among trap locations, suggesting mixing. Organic carbon content (weight percent total organic carbon) and excess 210Pb activities (dpm/g) increased down-canyon, reflecting reduced flux of sediment and organic carbon into traps. Differing organic carbon signatures in traps compared with previous measurements of seabed deposits along Monterey Canyon suggest that canyon deposits may not reflect organic carbon available to organisms and transported through the canyon with internal tides. Organic carbon burial efficiency estimates from comparing core and trap samples are low (~26% or much less), suggesting that the modern upper Monterey Canyon may not be an effective sink for carbon in biogeochemical and CO2 cycling. Organic carbon isotopic signatures appear more marine in traps that sample from the water column than in cores that sample seafloor deposits, likely owing to the influence of sediment density flow events on deposits and preferential consumption of relatively fresh marine organic carbon on the seafloor that was largely prevented in preserved traps. Along-canyon sediment and organic carbon transport by internal tides likely occurs in many modern global submarine canyons, but canyon deposits and remaining organic carbon appear to preferentially reflect episodic sediment density flow events unrelated to internal tides. This study provides a quantified example and conceptual schematic for internal-tide-related sediment and organic carbon transport, mixing, and burial trends along a submarine canyon that are likely to have common global aspects.

California↗

USGS2020

If you build it and they come, will they stay? Maturation of constructed fish spawning reefs in the St. Clair-Detroit River System

Constructed rock reefs have been used to remediate spawning habitat for Lake Sturgeon ( Acipenser fulvescens ) and other lithophilic spawning fishes in the St. Clair-Detroit River System, North America. Early projects used a cross-channel design and species-specific metrics (e.g., proximity to historical spawning locations) to guide reef placement. However, the Middle Channel Reefs and portions of other early projects were compromised by fine sediment accumulation. Therefore, geomorphological criteria were considered in siting reefs constructed after 2013 to avoid sediment sources and improve the likelihood of successful reef function. To evaluate the effectiveness of the revised placement process, we quantified physical maturation of constructed reefs using annual side-scan and down-looking sonar surveys beginning in 2014 and underwater video surveys beginning in 2015. Reef areas and hardness were measured from sonar surveys and underwater video was used to quantify surficial sediment composition. Size and hardness of reefs developed using geomorphological criteria decreased with time, but at rates slower than what was observed at the Middle Channel Reefs. Sediment composition of the reefs remained similar through 2017 and prevalence of reef rock was high, except at Hart's Light Reef, where dreissenid mussel shells composed 32% of the surficial substrate by age three. However, accumulation of fine sediments was documented at all reefs in 2018. Despite using geomorphic criteria to identify areas most suitable for reef construction, reef sediment composition has changed, and future reef restoration projects could benefit by incorporating methods for maintenance, in addition to using geomorphic criteria, to identify restoration sites.

Michigan, Ontario↗

USGS2017

Optical and biochemical properties of a southwest Florida whiting event

“Whiting” in oceanography is a term used to describe a sharply defined patch of water that contains high levels of suspended, fine-grained calcium carbonate (CaCO 3 ). Whitings have been reported in many oceanic and lake environments, and recently have been reported in southwest Florida coastal waters. Here, field and laboratory measurements were used to study optical, biological, and chemical properties of whiting waters off southwest Florida. No significant difference was found in chlorophyll a concentrations between whiting and outside waters (non-whiting water), but average particle backscattering coefficients in whiting waters were double those in outside waters, and remote sensing reflectance in whiting waters was higher at all wavelengths (400–700 nm). While other potential causes cannot be completely ruled out, particle composition and biochemical differences between sampled whiting water, contiguous water, and outside water indicate a biologically precipitated mode of whiting formation. Taxonomic examination of marine phytoplankton samples collected during a whiting event revealed a community dominated by autotrophic picoplankton and a small (<10 μm), centric diatom species, identified as Thalassiosira sp. through the use of scanning electron microscopy. Amorphous to fully formed crystals of CaCO 3 were observed along the girdle bands of Thalassiosira sp. cells and autotrophic picoplankton cells. Although carbonate parameters differed from whiting and contiguous to outside water, more sampling is needed to determine if these results are statistically significant.

Florida↗

USGS2024

Scenario design for infectious disease projections: Integrating concepts from decision analysis and experimental design

Across many fields, scenario modeling has become an important tool for exploring long-term projections and how they might depend on potential interventions and critical uncertainties, with relevance to both decision makers and scientists. In the past decade, and especially during the COVID-19 pandemic, the field of epidemiology has seen substantial growth in the use of scenario projections. Multiple scenarios are often projected at the same time, allowing important comparisons that can guide the choice of intervention, the prioritization of research topics, or public communication. The design of the scenarios is central to their ability to inform important questions. In this paper, we draw on the fields of decision analysis and statistical design of experiments to propose a framework for scenario design in epidemiology, with relevance also to other fields. We identify six different fundamental purposes for scenario designs (decision making, sensitivity analysis, situational awareness, horizon scanning, forecasting, and value of information) and discuss how those purposes guide the structure of scenarios. We discuss other aspects of the content and process of scenario design, broadly for all settings and specifically for multi-model ensemble projections. As an illustrative case study, we examine the first 17 rounds of scenarios from the U.S. COVID-19 Scenario Modeling Hub, then reflect on future advancements that could improve the design of scenarios in epidemiological settings.

Epidemics↗

USGS2007

Massive edifice failure at Aleutian arc volcanoes

Along the 450-km-long stretch of the Aleutian volcanic arc from Great Sitkin to Kiska Islands, edifice failure and submarine debris-avalanche deposition have occurred at seven of ten Quaternary volcanic centers. Reconnaissance geologic studies have identified subaerial evidence for large-scale prehistoric collapse events at five of the centers (Great Sitkin, Kanaga, Tanaga, Gareloi, and Segula). Side-scan sonar data collected in the 1980s by GLORIA surveys reveal a hummocky seafloor fabric north of several islands, notably Great Sitkin, Kanaga, Bobrof, Gareloi, Segula, and Kiska, suggestive of landslide debris. Simrad EM300 multibeam sonar data, acquired in 2005, show that these areas consist of discrete large blocks strewn across the seafloor, supporting the landslide interpretation from the GLORIA data. A debris-avalanche deposit north of Kiska Island (177.6° E, 52.1° N) was fully mapped by EM300 multibeam revealing a hummocky surface that extends 40 km from the north flank of the volcano and covers an area of ∼ 380 km 2 . A 24-channel seismic reflection profile across the longitudinal axis of the deposit reveals a several hundred-meter-thick chaotic unit that appears to have incised into well-bedded sediment, with only a few tens of meters of surface relief. Edifice failures include thin-skinned, narrow, Stromboli-style collapse as well as Bezymianny-style collapse accompanied by an explosive eruption, but many of the events appear to have been deep-seated, removing much of an edifice and depositing huge amounts of debris on the sea floor. Based on the absence of large pyroclastic sheets on the islands, this latter type of collapse was not accompanied by large eruptions, and may have been driven by gravity failure instead of magmatic injection. Young volcanoes in the central and western portions of the arc (177° E to 175° W) are located atop the northern edge of the ∼ 4000-m-high Aleutian ridge. The position of the Quaternary stratocones relative to the edge of the Aleutian ridge appears to strongly control their likelihood for, and direction of, past collapse. The ridge's steep drop to the north greatly increases potential runout length for slides that originate at the island chain.

Earth and Planetary Science Letters↗

USGS2021

Dating fault damage along the eastern Denali fault zone with hematite (U-Th)/He thermochronometry

Unraveling complex slip histories in fault damage zones to understand relations among deformation, hydrothermal alteration, and surface uplift remains a challenge. The dextral eastern Denali fault zone (EDFZ; southwest Yukon, Canada) bounds the Kluane Ranges and hosts a variety of fault-related rocks, including hematite fault surfaces, which have been exhumed through the brittle regime over a protracted period of geologic time. Scanning electron microscopy-based microtextural observations and hematite (U-Th)/He (hematite He) thermochronometry from these surfaces indicate multiple generations of foliated, high-aspect ratio hematite plates. Single-aliquot hematite He dates ( n = 38 "> n=38 ) from 11 samples range from 11.5 ± 3.2 Ma (2 σ ) to 3.4 ± 2.1 Ma and exhibit moderate inter- and intrasample dispersion. A subset of dates is 15-20 Myr younger than previously published apatite (U-Th)/He dates from collocated host rocks, despite similar closure temperatures, precluding a simple ambient cooling interpretation for our hematite He data. Mixture modeling defines hematite He date populations at ∼8 Ma, ∼6 Ma, and ∼4 Ma, and when combined with microtextural observations, supports episodes of hydrothermal alteration and fault reactivation at aseismic to subseismic slip rates. There is no evidence that hematite experienced deformation- or hydrothermal fluid-related He loss. Hematite He dates overlap previously documented Kluane Ranges surface uplift and shifting dynamics of the Yakutat microplate, pinpointing fault networks and deformation processes that accommodate regional deformation in response to far-field plate boundary processes.

Alaska↗

USGS2021

A new remote sensing-based Carbon Sequestration Potential Index (CSPI): A tool to support land carbon management

Integrating remote sensing into assessments of carbon stocks and fluxes has advanced our understanding of how global change affects landscapes and our capacity to support decision making about forest management. However, there remains a lack of detailed and actionable analyses conducted across widely ranging environmental conditions that are appropriate for tactical planning. We used airborne laser scanning data and multi-source satellite imagery to estimate forest aboveground carbon density and gross primary production, and to map forest cover across the main Hawaiian Islands. We used these measures to develop the Carbon Sequestration Potential Index (CSPI), which identifies where the potential for carbon sequestration following afforestation would be highest within a complex landscape of 304 management units. Variation in CSPI was high across islands and between ecosystems, with low values for cool, dry and largely intact forest systems and high values for warm, wet and largely non-forested systems. The CSPI provided a rapid, spatially-explicit and actionable assessment of Hawaiian forest reserves, which can help stewardship agencies contribute to state carbon neutrality goals through climate-smart and science-driven prescriptions that encompass conservation to restoration.

Hawaii↗

USGS2004

Speciation and characterization of arsenic in gold ores and cyanidation tailings using X-ray absorption spectroscopy

The knowledge of mineralogy and molecular structure of As is needed to better understand the stability of As in wastes resulting from processing of gold ores. In this study, optical microscopy, scanning electron microscopy, electron microprobe, X-ray diffraction and X-ray absorption fine structure (XAFS) spectroscopy (including both XANES and EXAFS regimes) were employed to determine the mineralogical composition and local coordination environment of As in gold ores and process tailings from bench-scale tests designed to mimic a common plant practice. Arsenic-bearing minerals identified in the ores and tailings include iron (III) oxyhydroxides, scorodite (FeAsO4??2H2O), ferric arsenates, arseniosiderite (Ca2Fe3 (AsO4)3O2??3H2O), Ca-Fe arsenates, pharmacosiderite (KFe4 (AsO4)3(OH)4??6-7H2O), jarosite (K2Fe6(SO4)4 (OH)12) and arsenopyrite (FeAsS). Iron (III) oxyhydroxides contain variable levels of As from trace to about 22 wt% and Ca up to approximately 9 wt%. Finely ground ore and tailings samples were examined by bulk XAFS and selected mineral grains were analyzed by microfocused XAFS (micro-EXAFS) spectroscopy to reconcile the ambiguities of multiple As sources in the complex bulk EXAFS spectra. XANES spectra indicated that As occurs as As5+in all the samples. Micro-EXAFS spectra of individual iron (III) oxyhydroxide grains with varying As concentrations point to inner-sphere bidentate-binuclear arsenate complexes as the predominant form of As. There are indications for the presence of a second Fe shell corresponding to bidentate-mononuclear arrangement. Iron (III) oxyhydroxides with high As concentrations corresponding to maximum adsorption densities probably occur as nanoparticles. The discovery of Ca atoms around As in iron (III) oxyhydroxides at interatomic distances of 4.14-4.17 A?? and the coordination numbers suggest the formation of arseniosiderite-like nanoclusters by coprecipitation rather than simple adsorption of Ca onto iron (III) oxyhydroxides. Correlation of Ca with As in iron (III) oxyhydroxides as determined by electron microprobe analysis supports the coprecipitate origin for the presence of Ca in iron (III) oxyhydroxides. The samples containing higher abundances of ferric arsenates released higher As concentrations during the cyanidation tests. The presence of highly soluble ferric arsenates and Ca-Fe arsenates, and relatively unstable iron (III) oxyhydroxides with Fe/As molar ratios of less than 4 in the ore and process tailings suggests that not only the tailings in the impoundment will continue to release As, but also there is the potential for mobilization of As from the natural sources such as the unmined ore. ?? 2004 Elsevier Ltd.

Geochimica et Cosmochimica Acta↗

USGS2004

Biogeochemical transformation of Fe minerals in a petroleum-contaminated aquifer

The Bemidji aquifer in Minnesota, USA is a well-studied site of subsurface petroleum contamination. The site contains an anoxic groundwater plume where soluble petroleum constituents serve as an energy source for a region of methanogenesis near the source and bacterial Fe(III) reduction further down gradient. Methanogenesis apparently begins when bioavailable Fe(III) is exhausted within the sediment. Past studies indicate that Geobacter species and Geothrix fermentens -like organisms are the primary dissimilatory Fe-reducing bacteria at this site. The Fe mineralogy of the pristine aquifer sediments and samples from the methanogenic (source) and Fe(III) reducing zones were characterized in this study to identify microbiologic changes to Fe valence and mineral distribution, and to identify whether new biogenic mineral phases had formed. Methods applied included X-ray diffraction; X-ray fluorescence (XRF); and chemical extraction; optical, transmission, and scanning electron microscopy; and Mössbauer spectroscopy. All of the sediments were low in total Fe content (≈ 1%) and exhibited complex Fe-mineralogy. The bulk pristine sediment and its sand, silt, and clay-sized fractions were studied in detail. The pristine sediments contained Fe(II) and Fe(III) mineral phases. Ferrous iron represented approximately 50% of Fe TOT . The relative Fe(II) concentration increased in the sand fraction, and its primary mineralogic residence was clinochlore with minor concentrations found as a ferroan calcite grain cement in carbonate lithic fragments. Fe(III) existed in silicates (epidote, clinochlore, muscovite) and Fe(III) oxides of detrital and authigenic origin. The detrital Fe(III) oxides included hematite and goethite in the form of mm-sized nodular concretions and smaller-sized dispersed crystallites, and euhedral magnetite grains. Authigenic Fe(III) oxides increased in concentration with decreasing particle size through the silt and clay fraction. Chemical extraction and Mössbauer analysis indicated that this was a ferrihydrite like-phase. Quantitative mineralogic and Fe(II/III) ratio comparisons between the pristine and contaminated sediments were not possible because of textural differences. However, comparisons between the texturally-similar source (where bioavailable Fe(III) had been exhausted) and Fe(III) reducing zone sediments (where bioavailable Fe(III) remained) indicated that dispersed detrital, crystalline Fe(III) oxides and a portion of the authigenic, poorly crystalline Fe(III) oxide fraction had been depleted from the source zone sediment by microbiologic activity. Little or no effect of microbiologic activity was observed on silicate Fe(III). The presence of residual “ferrihydrite” in the most bioreduced, anoxic plume sediment (source) implied that a portion of the authigenic Fe(III) oxides were biologically inaccessible in weathered, lithic fragment interiors. Little evidence was found for the modern biogenesis of authigenic ferrous-containing mineral phases, perhaps with the exception of thin siderite or ferroan calcite surface precipitates on carbonate lithic fragments within source zone sediments.

Geochimica et Cosmochimica Acta↗

USGS2008

Processes of coastal bluff erosion in weakly lithified sands, Pacifica, California, USA

Coastal bluff erosion and landsliding are currently the major geomorphic processes sculpting much of the marine terrace dominated coastline of northern California. In this study, we identify the spatial and temporal processes responsible for erosion and landsliding in an area of weakly lithified sand coastal bluffs located south of San Francisco, California. Using the results of a five year observational study consisting of site visits, terrestrial lidar scanning, and development of empirical failure indices, we identify the lithologic and process controls that determine the failure mechanism and mode for coastal bluff retreat in this region and present concise descriptions of each process. Bluffs composed of weakly cemented sands (unconfined compressive strength - UCS between 5 and 30??kPa) fail principally due to oversteepening by wave action with maximum slope inclinations on the order of 65 at incipient failure. Periods of significant wave action were identified on the basis of an empirical wave run-up equation, predicting failure when wave run-up exceeds the seasonal average value and the bluff toe elevation. The empirical relationship was verified through recorded observations of failures. Bluffs composed of moderately cemented sands (UCS up to 400??kPa) fail due to precipitation-induced groundwater seepage, which leads to tensile strength reduction and fracture. An empirical rainfall threshold was also developed to predict failure on the basis of a 48-hour cumulative precipitation index but was found to be dependent on a time delay in groundwater seepage in some cases.

Geomorphology↗

USGS2019

The effects of topographic surveying technique and data resolution on the detection and interpretation of geomorphic change

Change detection of high resolution topographic data is commonly used in river valleys to quantify reach- and site-scale sediment budgets by estimating the erosion/deposition volume, and to interpret the geomorphic processes driving erosion and deposition. Field survey data are typically collected as point clouds that are often converted to gridded raster datasets and the ultimate choice of grid resolution is left to the user. This choice may have important implications for both the quantification and interpretation of geomorphic change. Here we used concurrent topographic data collected by terrestrial laser scanning (TLS) and structure-from-motion (SfM) photogrammetry to quantify the influence of grid resolution and sampling technique on (a) the sediment budget and (b) the presence and role of geomorphic processes (i.e., alluvial, colluvial, aeolian, and fluvial transport) driving topographic change at four sites along the Colorado River in Grand Canyon, Arizona, USA. We found that while both techniques produced similar estimates for site-scale sediment budgets, the magnitude of detected topographic change was dampened at coarser pixel resolutions. An overall decrease in the areal extent of erosion and deposition were observed, respectively, when coarsening pixel size from 5 cm to 1 m among all sites. Coarser resolution data tended to affect interpretation of landscape change along the margins of river valleys. For example, when changing from 5 cm to 1 m pixel resolution, the inferred contribution of aeolian changes to total site-scale geomorphic change increased in area by 7.9%, whereas the inferred contribution of alluvial and colluvial processes decreased in area by 97.9% and 88.2%, respectively. More generally, we found that coarsening pixel sizes disproportionately attributed geomorphic change to one or more of the most common processes operating at a site. We also found that coarsening pixel resolution amplified the net sediment imbalance at the site scale, driving the imbalance at erosional sites further into erosion and vice versa for depositional sites. Our results have implications both for point cloud data collection and for raster dataset processing. We argue that selecting the finest obtainable resolution is not always warranted to accurately quantify and interpret geomorphic change, because remote sensing technique, topographic data resolution, and analysis procedure can be optimized to capture the spatial scale of those processes driving landscape change. However, in landscapes at or near sediment equilibrium (i.e., equal amounts of erosion and deposition), the finest obtainable topographic data resolution is warranted to avoid amplifying sediment imbalance and erroneously inferring that sites are trending toward erosion or deposition.

Arizona↗

USGS2021

Uncovering process domains in large rivers: Patterns and potential drivers of benthic substrate heterogeneity in two North American riverscapes

Identifying and understanding functional process domains (sensu Montgomery, 1999) in rivers is paramount for linking the physical habitat template to ecosystem structure and function. To date, efforts to do this have been rare, especially in large rivers, as they require appropriate tools for quantifying habitat heterogeneity with fine-scale resolution across broad spatial extents. In this study, we used side-scan sonar technology to map riverbed substrate at six sites in the Yellowstone and Missouri rivers. Substrate maps were then analyzed and visualized using geospatial analysis to relate fine-grained spatial substrate patterns to process domain structure. Our findings revealed two distinct nested domains of substrate patchiness, suggesting that different factors are responsible for shaping patterns of substrate at different scales. Although small-scale patchiness in substrate was likely driven by internal, or autogenic, physical processes, patterns at larger segment extents (>3 km) were often driven by abrupt transitions in habitat related to exogenous factors such as lateral erosion of talus, tributary inputs, and bank armoring. Additionally, we found that heterogeneity in benthic substrate increased with spatial extent at all of our study sites; however, this relationship was lower in the Missouri River, which is altered by impoundment. Our study represents one of the first efforts to relate benthic habitat heterogeneity to nested process domain structure in large riverscapes, and offers a unique perspective for linking landscape processes, geomorphological habitat heterogeneity, and biological structure and function in large rivers.

Montana, North Dakota↗

USGS2024

Combining terrestrial lidar with single line transects to investigate geomorphic change: A case study on the Upper Verde River, Arizona

The Upper Verde River in northern Arizona, USA is a vital resource for the wildlife and humans that rely on its waters. We characterize the riparian corridor topography using terrestrial laser scanner (TLS) data from 2021 to 2022. We also quantify geomorphic changes associated with human and climate-driven alterations in river flow and vegetation changes by combining the contemporary lidar surveys with legacy measurements from single line geomorphology transects measured by the United States Forest Service (USFS) in 2009. Seventeen plots along the Upper Verde River were surveyed with the TLS and the data were coregistered within individual plots with a Root Mean Square Error of <0.03 m among scan positions. Digital Elevation Models (DEM) were derived for each plot from the TLS data at 10 cm resolution and compared to the 2009 USFS cross-section data to quantify elevation changes. In areas with statistically significant change, we detected maximum changes in elevation due to erosion and deposition of −0.37 m and + 0.97 m, respectively. Topographic changes over the 13-year period were predominately aggradation and associated with sediment deposition, which we hypothesize might have resulted from altered river flow and vegetation encroachment. This study also demonstrates a quantitative and statistical methodology to fuse traditional single line cross-section data with contemporary lidar data to quantify geomorphic change. The novel approach demonstrated here is broadly applicable to natural resource managers for integrating and contextualizing legacy topographic data for understanding past, present, and future landscape and habitat changes.

Arizona↗

USGS2025

Decadal-scale effects of a dam removal on channel geomorphology, sediment and large wood on the Elwha River, Washington, USA

The removal of Glines Canyon Dam on the Elwha River in western Washington, USA, from 2011 to 2014 introduced a 20-Mt pulse of stored sediment and logs into the downstream channel. We used terrestrial laser scanning, high-resolution orthoimages, and surveys of large wood (LW) and sediment grain-size distribution to quantify changes to the channel and LW in four different geomorphic settings spanning a 16-year period before, during, and after dam removal. The results provide insights into the role of site-specific geomorphology on the interplay among sediment size and supply, wood, and channel form in the aftermath of a dam removal. Sediment-size distribution, braiding index, and number of log jams rapidly reached new steady states. Other factors, such as channel sinuosity and log jam area, were still evolving six years after the dam was removed. The rate and type of river response was partially dictated by the geomorphic setting and the accumulation of LW. Complex reaches trapped more sediment and LW, initiating immediate changes in the channel count, position and lateral migration that continued to evolve through positive feedbacks. Single-channel sites experienced less initial erosion and deposition, but channel migration continued for years once it was underway. The post-dam sediment composition progressively shifted to a mixed size distribution midway between the armored cobbles when the dam was in place and the influx of primarily sand and fine gravel during dam removal. Reworking of sediment was most rapid in the first year after dam removal, especially at the site with the greatest channel complexity. The relation between log jams and channel divisions fundamentally changed. There were 11 log jams in the middle reach of the Elwha River downstream of Glines Canyon Dam, and all log jams associated with channel divisions occurred at the heads of stable, vegetated islands. During dam removal, the number of log jams rapidly increased to 86 and stabilized near that level in the post-dam period. While log jams on stable islands persisted, more were added at divisions around transient sediment bars, scattered across gravel bars, or outside of the active channel. Following a brief spike during dam removal, there was a net long-term increase of ∼10 % in the number of channel divisions associated with log jams. The sediment deposits, LW, vegetation, channel morphology and river discharge continued to cause adjustments within the fluvial system a decade after the start of dam removal. This state of greater variability could be the new equilibrium for years to come.

Washington↗

USGS2024

Ore mineralization in the Mofete and San Vito geothermal fields, Campi Flegrei volcanic complex, Naples, Italy

The Mofete and San Vito geothermal fields, located west of Naples, Italy, are part of the Campi Flegrei volcanic complex. In the 1970s, exploratory wells were drilled to a depth of ~3000 m in an attempt to locate high-enthalpy fluids for potential power production. Drill core samples from Mofete wells (MF1, MF2, and MF5) and from San Vito wells (SV1 and SV3) contain authigenic ore mineralization. Pyrite, pyrrhotite, and galena are abundant. Less common are chalcopyrite, sphalerite, arsenopyrite, and scheelite; rare are millerite, violarite, native bismuth, tellurobismuthite, cassiterite, molybdenite, and acanthite. Mineral chemistry was determined by electron microprobe wavelength dispersive spectroscopy aided by a scanning electron microscope equipped with energy-dispersive spectroscopy. The mineral assemblage suggests a low sulfidation environment and the absence of pyrrhotite in the MF1 well and upper part of the SV1 well indicates variable sulfur activity. Both molybdenite and scheelite were identified in samples SV1–2860 and SV3–2353 and scheelite in the SV3 well is zoned with variable Mo 6+ content; low Mo 6+ zones show blue cathodoluminescence, whereas, zones with high Mo 6+ content are yellow to brown. Zoned scheelite and the occurrence of both Mo-bearing minerals attest to the variability of ƒO 2 and ƒS 2 in the geothermal fluid.

Naples↗

USGS2004

Ancient wet aeolian environments on Earth: Clues to presence of fossil/live microorganisms on Mars

Ancient wet aeolian (wet-sabkha) environments on Earth, represented in the Entrada and Navajo sandstones of Utah, contain pipe structures considered to be the product of gas/water release under pressure. The sediments originally had considerable porosity allowing the ingress of living plant structures, microorganisms, clay minerals, and fine-grained primary minerals of silt and sand size from the surface downward in the sedimentary column. Host rock material is of a similar size and porosity and presumably the downward migration of fine-grained material would have been possible prior to lithogenesis and final cementation. Recent field emission scanning electron microscopy (FESEM) and EDS (energy-dispersive spectrometry) examination of sands from fluidized pipes in the Early Jurassic Navajo Sandstone reveal the presence of fossil forms resembling fungal filaments, some bearing hyphopodium-like structures similar to those produced by modern tropical leaf parasites. The tropical origin of the fungi is consistent with the paleogeography of the sandstone, which was deposited in a tropical arid environment. These fossil fungi are silicized, with minor amounts of CaCO3 and Fe, and in some cases a Si/Al ratio similar to smectite. They exist as pseudomorphs, totally depleted in nitrogen, adhering to the surfaces of fine-grained sands, principally quartz and orthoclase. Similar wet aeolian paleoenvironments are suspected for Mars, especially following catastrophic sediment-charged floods of enormous magnitudes that are believed to have contributed to rapid formation of large water bodies in the northern plains, ranging from lakes to oceans. These events are suspected to have contributed to a high frequency of constructional landforms (also known as pseudocraters) related to trapped volatiles and water-enriched sediment underneath a thick blanket of materials that were subsequently released to the martian surface, forming piping structures at the near surface and constructional landforms at the surface. This constructional process on Mars may help unravel the complex history of some of the piping structures observed on Earth; on Earth, evidence for the constructional landforms has been all but erased and the near-surface piping structures exposed through millions of years of differential erosion and topographic inversion now occur as high-standing promontories. If the features on both Earth and Mars formed by similar processes, especially involving water and other volatiles, and since the piping structures of Earth provided suitable environments for life to thrive in, the martian features in the northern plains should be considered as prime targets for physico/mineral/chemical/microbiological analyses once the astrobiological exploration of the red planet begins in earnest. ?? 2004 Elsevier Inc. All rights reserved.

Icarus↗

USGS2013

Weakening of ice by magnesium perchlorate hydrate

We show that perchlorate hydrates, which have been detected at high circumpolar martian latitudes, have a dramatic effect upon the rheological behavior of polycrystalline water ice under conditions applicable to the North Polar Layered Deposits (NPLD). We conducted subsolidus creep tests on mixtures of ice and magnesium perchlorate hydrate, Mg(ClO4)2·6H2O (MP6), of 0.02, 0.05, 0.10, and 0.47 volume fraction MP6. We found these mixtures to be increasingly weak with increasing MP6 content. For mixtures with ⩽0.10 volume fraction MP6, we resolved a stress exponent of n ≈ 2 at low stresses transitioning to n ≈ 4 above 10 MPa. Scanning electron microscopy of deformed specimens revealed MP6 to be distributed as an interconnected film between ice grains. These results suggest that grain boundary sliding (GBS) may be enhanced with respect to pure ice. As the enhancement of GBS is expected in polycrystalline aggregates containing a few percent melt or otherwise weak material distributed along grain boundaries, the observed n ≈ 2 is consistent with the mutual accommodation of basal slip and GBS. If ice containing trace concentrations of MP6 is also much weaker than pure ice at low stresses, flow in the NPLD could be significantly enhanced, particularly at the warmer basal temperatures associated with higher martian obliquities.

Icarus↗

USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗