Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS1982

Preliminary report on the geology and gold mineralization of the Gold Basin-Lost Basin mining districts, Mohave County, Arizona

The Gold Basin-Lost Basin mining districts are adjacent to each other in northwestern Arizona, south of Lake Mead, and just west of the Grand Wash Cliffs. Most recorded production from lode deposits is credited to mines in the Gold Basin district, which is in the southern White Hills, whereas the bulk of the placer production has been from placers worked along the eastern flank of the Lost Basin range, about 16 km to the northeast across Hualapai Valley. Gold in quartz veins apparently was first discovered in the 1870's. Recorded production from the districts between 1901 and 1942 includes 13,508 oz gold and 6,857 oz silver, and this recorded production has a dollar value of about $359,000 of which 98 percent is credited to gold. Most known occurrences of lode gold in the districts are associated with widespread quartz-cored pegmatite-vein systems, presumably emplaced episodically during Proterozoic X, Proterozoic Y, and Late Cretaceous time into Proterozoic X metamorphic and igneous rocks. The bulk of the veins apparently were emplaced during the Late Cretaceous, and they were localized along both high- and low-angle structures in the Proterozoic X terrane. These veins appear to be associated genetically with presumably Late Cretaceous, two-mica magmatism. A Late Cretaceous two-mica monzogranite crops out in an approximately 4 to 5 km 2 area in the southern part of the Gold Basin district and includes some facies of episyenite. Some gold is found also in small episyenitic alteration pipes, or in veins caught up tectonically along a regionally extensive, low-angle detachment surface which crops out prominently in the southern White Hills, and has been traced for at least 30 km along the western flank of the White Hills. Hydrothermal micas from selected veins in the districts give K-Ar ages of 822, 712, 69, 68, and 65 m.y. (million years), and from the pipes, ages of 130 and 127 m.y. The oldest ages (822 and 712 m.y.) presumably reflect resetting of veins that probably were emplaced penecontemporaneous with emplacement of the 1,400-m.y. granite of Gold Butte, which crops out just to the north of Lake Mead. The latter ages (130 and 127 m.y.) must reflect either the presence of excess radiogenic argon in the hydrothermal environment of the evolving pipes, or contamination of the dated mineral separates by Proterozoic mica and (or) feldspar. Primary white mica from the two-mica monzogranite gives a K-Ar age of 72 m.y.. Most occurrences of gold in the veins and pipes probably reflect either remobilization of gold from gold-bearing, near-surface Proterozoic source areas, or anatectic incorporation of gold into Late Cretaceous, two-mica magmas from very deep gold-bearing Proterozoic sources. Deposition of gold occurred in a mesothermal environment during the galena-, chalcopyrite-, ferroan-carbonate-bearing stages of the veins. Homogenization studies of fluid inclusions prominent in the veins and pipes yield temperatures mostly in the range 150 to 280°C. Early-stage, trapping temperatures at the pipes probably were about 330°C and pressures in the range 500 to 700 bars can be inferred. Fluids were moderately saline, mostly 4 to 16 weight percent NaC1 equivalent, nonboiling, and also contain appreciable amounts of carbon dioxide and, in places, fluorine. Such fluids associated with the deposition of gold in these districts largely bridge the fluid composition interval between many other epithermal precious-metal and porphyry coper deposits. Approximately 350 compositional analyses obtained from native-gold samples from 20 mines in the Gold Basin district and 48 veins in the Lost Basin district show silver contents that range from 6 to approximately 50 weight percent, and copper from 0.01 to 0.5 weight percent. Metal zonation and possible relation to a porphyry copper system at depth can be inferred from some of these chemical data. The differences in the composition of placer gold from 24 occurrences in the Lost Basin district from that of nearby lode sources suggest that other sources contributed gold to the placers or that locally derived grains were enriched by oxidation and weathering of the lodes.

Arizona↗
USGS2002

Geologic investigations in the Lake Valley area, Sierra County, New Mexico

At the request of the Bureau of Land Management, the U.S. Geological Survey evaluated the area of the historic Lake Valley mining district and townsite, Sierra County, New Mexico, for its potential for undiscovered mineral resources. The four chapters of this report describe the geology of the area, present the results of geophysical investigations carried out to aid in interpreting subsurface geology, describe the mining history and character of the region's ore deposits, and present geochemical data on potential for contamination from abandoned mine dumps in the mining district.

New Mexico↗
USGS2003

Environmental controls on water quality: Case studies from Battle Mountain mining district, north-central Nevada

The environmental controls on water quality were the focus of our study in a portion of the Battle Mountain mining district, north-central Nevada. Samples representing areas outside known mineralized areas, in undisturbed mineralized areas, and in mined areas were chemically and isotopically analyzed. The results are related to geologic, hydrologic, and climatic data. Streams in background areas outside the mineralized zones reflect normal weathering of volcanically derived rocks. The waters are generally dilute, slightly alkaline in pH, and very low in metals. As these streams flow into mineralized zones, their character changes. In undisturbed mineralized areas, discharge into streams of ground water through hydrologically conductive fractures can be traced with chemistry and, even more effectively, with sulfur isotopic composition of dissolved sulfate. Generally, these tracers are much more subtle than in those areas where mining has produced adits and mine-waste piles. The influence of drainage from these mining relicts on water quality is often dramatic, especially in unusually wet conditions. In one heavily mined area, we were able to show that the unusually wet weather in the winter and spring greatly degraded water quality. Addition of calcite to the acid, metalrich mine drainage raised the stream pH and nearly quantitatively removed the metals through coprecipitation and (or) adsorption onto oxyhydroxides. This paper is divided into four case studies used to demonstrate our results. Each addresses the role of geology, hydrology, mining activity and (or) local climate on water quality. Collectively, they provide a comprehensive look at the important factors affecting water quality in this portion of the Battle Mountain mining district.

Nevada↗
USGS1978

Effects of coal mine subsidence in the western Powder River basin, Wyoming

Analyses of the surface effects of past underground coal mining in the western Powder River Basin suggest that underground mining of strippable coal deposits will damage the environment more over long periods of time than will modern surface mining, provided proper restoration procedures are followed after surface mining. Subsidence depressions and pits are a continuing hazard to the environment and to man's activities 5-20 km north of Sheridan, Wyo., above mines that were abandoned 25-80 years ago where the overburden is weak and is less than about 60 m thick. In addition, fires commonly start by spontaneous combustion when water and air enter the abandoned mine workings via subsidence cracks and pits. The fires can then spread to unmined coal as they create more cavities, more subsidence, and more cracks and pits through which air can circulate. In modern surface mining operations the total land surface underlain by minable coal is removed to expose the coal. The coal is removed, the overburden and topsoil are replaced, and the land regraded and revegetated. The land, although disturbed, can be more easily restored and put back into use than land underlain by abandoned underground mine workings in areas where the overburden is less than about 60 m thick. The resource recovery of modern surface mining also is much greater than that of underground mining procedures. Although present-day underground mining technology is advanced as compared to that of 25-80 years ago, subsidence resulting from mining of thick coal beds beneath overburden less than about 60 m thick by underground methods can cause greater damage to surface drainage, ground water, and vegetation than can properly designed surface mining operations. This report briefly discusses the geology and surface and underground effects of former large-scale underground mining in a 50 km2 area north of Sheridan, Wyo. and describes some environmental consequences and problems caused by mining.

Wyoming↗
USGS2010

Geology, geochemistry, and genesis of the Greens Creek massive sulfide deposit, Admiralty Island, southeastern Alaska

In 1996, a memorandum of understanding was signed by representatives of the U.S. Geological Survey and Kennecott Greens Creek Mining Company to initiate a cooperative applied research project focused on the Greens Creek massive sulfide deposit in southeastern Alaska. The goals of the project were consistent with the mandate of the U.S. Geological Survey Mineral Resources Program to maintain a leading role in national mineral deposits research and with the need of Kennecott Greens Creek Mining Company to further development of the Greens Creek deposit and similar deposits in Alaska and elsewhere. The memorandum enumerated four main research priorities: (1) characterization of protoliths for the wall rocks, and elucidation of their alteration histories, (2) determination of the ore mineralogy and paragenesis, including metal residences and metal zonation within the deposit, (3) determination of the ages of events important to ore formation using both geochronology and paleontology, and (4) development of computer models that would allow the deposit and its host rocks to be examined in detail in three dimensions. The work was carried out by numerous scientists of diverse expertise over a period of several years. The written results, which are contained in this Professional Paper, are presented by 21 authors: 13 from the U.S. Geological Survey, 4 from Kennecott Greens Creek Mining Company, 2 from academia, and 2 from consultants. The Greens Creek deposit (global resource of 24.2 million tons at an average grade of 13.9 percent zinc, 5.1 percent lead, 0.15 troy ounce per ton gold, and 19.2 troy ounces per ton silver at zero cutoff) formed in latest Triassic time during a brief period of rifting of the Alexander terrane. The deposit exhibits a range of syngenetic, diagenetic, and epigenetic features that are typical of volcanogenic (VMS), sedimentary exhalative (SEDEX), and Mississippi Valley-type (MVT) genetic models. In the earliest stages of rifting, formation of precious-metal-rich silica-barite-carbonate white ores began at low temperature in a shallow, subaqueous setting, probably a thin carbonate shelf on the flanks of the Alexander landmass. Epigenetic carbonate replacement textures in the footwall dolostones are overlain by stratiform silica-carbonate-barite-rich ores and indicate that early mineralization formed at and just beneath the paleo sea floor by mixing of a reduced, precious-metal-rich, base-metal-poor hydrothermal fluid with oxygenated seawater. As rifting intensified, the shelf was downfaulted and isolated as a graben. Isolation of the basin and onset of starved-basin shale sedimentation was concurrent with emplacement of mafic-ultramafic intrusives at shallow levels in the rift, resulting in an increasingly higher temperature and progressively more anoxic ore-forming environment. The formation of the main stage of massive sulfide ores began as the supply of bacterially reduced sulfur increased in the accumulating shales. As the main-stage mineralization intensified, shale sedimentation inundated the hydrothermal system, eventually forming a cap. Biogenic sulfate reduction supplied reduced sulfur to the base of the shales where mixing occurred with hot, base-metal-rich hydrothermal fluids. Ore deposition continued by destruction and epigenetic replacement of the early white ores in proximal areas and by inflation and diagenetic replacement of unlithified shale at the interface between the white ores and the base of the shale cap. Ore deposition waned as the shales became lithified and as the supply of bacterially reduced sulfur to the site of ore deposition ceased. The final stages of rifting resulted in the emplacement of mafic-ultramafic intrusive rocks into the Greens Creek system and extrusion of voluminous basaltic flows at the top of the Triassic section. Greenschist facies metamorphism during the Jurassic-Cretaceous accretion of the Alexander terrane to the continental margin resulted in recrystalli

Professional Paper↗
USGS2018

The Central African Republic Diamond Database—A geodatabase of archival diamond occurrences and areas of recent artisanal and small-scale diamond mining

The alluvial diamond deposits of the Central African Republic (CAR) are mined almost exclusively by way of informal artisanal and small-scale mining (ASM) methods. ASM sites range in diameter from a few meters to 30 meters or more, and are typically excavated by crews of diggers using hand tools, sieves, and jigs. CAR’s reported annual production has ranged from 300,000 to 470,000 carats over the past decade. This production is significant for CAR because it accounts for a large portion of the country’s export income and employs an estimated 60,000 to 90,000 miners nationally. Diamond production has also been linked to the violent conflict and political instability which have plagued the country for decades. The most recent conflict began in 2012 and resulted in an international embargo on the export of rough diamonds from CAR. This embargo was followed by a ceasefire and a return of peace in certain zones of the country in 2015; however, political and economic instability continues to afflict many areas of the country. International efforts to restore peace in CAR have included United Nations support as well as international technical assistance in tracking, assessing, and monitoring diamond production. In 2015, the Kimberley Process (KP) developed an operational framework allowing for legitimate exports from five subprefectures in CAR that were deemed to be compliant with KP internal controls and which were also considered to be free from systematic violence or control of armed groups. The goal of this study was to address information gaps regarding the location and extent of diamond occurrences and mining activity through the integration of geologic research with remote sensing, geographic information systems analysis, and fieldwork. Effective and efficient monitoring of diamond mining activity using satellite imagery requires detailed understanding of the geographic distribution of diamond sources and mining activities. A two-phase methodology was developed to address the knowledge gaps. The first phase consisted of the creation of a comprehensive geospatial catalogue of diamond mining and occurrence locations from archival records such as historical maps, mining reports, academic publications, and field data. Building upon this locational database, the second phase consisted of the creation of a geospatial dataset cataloguing current mining activity locations through manual interpretation of recently acquired satellite imagery. The accuracy of this second geospatial dataset was then assessed using field observations made between 2016 and 2017 by the U.S. Agency for International Development’s Property Rights and Artisanal Diamond Development II project. This report presents a two-part geodatabase: part 1 contains the locations of diamond mine sites and occurrences from archival sources, and part 2 indicates areas of current or recent mining activity. This geodatabase is unique in its temporal and spatial extent and may be used to analyze the geographic distribution of CAR’s known diamond resources, to assess the effect of recent violent conflicts and KP actions on diamond produc-tion, to provide decision makers with information regarding small-scale diamond mining, and to improve the monitoring of mining in regions of the country prone to conflict.

Open-File Report↗
USGS2010

Evaluation of the extent of contamination caused by historical mining in catchments of central Colorado

The U.S. Geological Survey conducted an assessment of stream water and sediment quality in central Colorado, an area of about 54,000 km2. The study area is focused on small tributary catchments in the Rocky Mountains. The Colorado Mineral belt, a northeast-trending mineralized zone that experienced base- and precious-metal mining at the beginning of the late 1800s and early 1900s, cuts diagonally across the geologic trend in the study area. The goal of this study was to compare water and sediment quality in background catchments with those which have been mined. Water and sediment data from 200 catchments, and data from macroinvertebrates from more than 100 catchments, provided ample data for evaluation of the effects of mining on water and sediment quality. Focused sampling was conducted during low-flow conditions in the summers of 2004-2007. Samples were collected from catchments that (1) were underlain largely by a single lithologic unit, (2) contained hydrothermally altered rock and had been prospected, and (3) contained historical mines. Geochemical data determined from catchments that did not contain hydrothermal alteration or historical mines met water-quality criteria and recommended sediment-quality guidelines and showed small variations in base-metal concentrations. Hydrothermal alteration and mineralization typically are associated with igneous rocks that have intruded older bedrock. Base-metal concentrations were elevated in sediment from catchments underlain by hydrothermally altered rock. Catchments affected by historical mining contained highly elevated base-metal concentrations. Classification of catchments on the basis of mineral deposit types proved to be an efficient and accurate method for discriminating catchments that had degraded water and sediment quality. Only about 4.5 percent of the study area has been affected by historical mining, whereas a larger portion of the study area is underlain by hydrothermally altered rock. Weathering of QSP-altered catchments release metals and result in naturally elevated geochemical background concentrations in both sediment and water. The presence of hydrothermal alteration is shown to be a major consideration in the selection of sites for the determination of geochemical background.

Conference Paper↗
USGS2007

ArcView Coal Evaluation User's Guide

Purpose: The objective of the ArcView Coal Evaluation (ACE) is to estimate the amount and location of coal available to be mined by various coal mining technologies, based on the geologic coverages developed in the National Coal Resource Assessment (NCRA) which are the starting coverages used in the Geographic Information Systems (GIS) evaluation of coal resources. The ACE Users Guide provides many examples of how to apply technical limits based upon mining technology. The methods, which are iterative for any given mining technology, should transfer directly by mining technology to other coal beds.

Open-File Report↗
USGS1995

1995 annual report on Alaska's mineral resources

Section 1011 of the Alaska National Interest Lands Conservation Act (ANILCA) of 1980, as amended, requires that "On or before October 1, 1982, and annually thereafter, the President shall transmit to the Congress all pertinent public information relating to minerals in Alaska gathered by the United States Geological Surveys, United States Bureau of Mines, and any other Federal agency." This report has been prepared in response to that requirement. This circular is the fourteenth in the series of annual mineral reports mandated by the ANILCA. The report provides information about current Alaskan mineral projects and events during 1994; the emphasis is on Federal activity. The report addresses both onshore and offshore areas of Alaska. The U.S. Geological Survey (USGS), U.S. Bureau of Mines (USBM), and Minerals Management Service (MMS) are the principal Federal agencies that publish information about energy and mineral resources in Alaska. Their reports and data form the basis for decisions by other Federal agencies regarding land use, access, environmental impacts, and mining claim evaluation. The time required for sample analysis, data synthesis, and publication is lengthy; as a result, scientific reports are generally issued a year or more after initial sample and data collection. Other sources of information for this report include additional Federal and State publications, trade and professional journals, presentations at public meetings and hearings, and press releases. Information is provided for two broad categories of minerals: energy resources and nonfuel-mineral resources.

Circular↗
USGS2006

State summaries: Colorado

According to the Colorado Geological Survey (CGS), Colorado's mining industry enjoyed a record-breaking year in 2005. For the whole year, the total value of nonfuel minerals, coal and uranium produced in the state in 2005 amounted to $2.4 billion. The production value of $1.52 billion in the nonfuel sector broke the previous record of $1.3 billion set in 1980, and is 60% higher than the revised 2004 CGS estimate of $950.5 million. The United States Geological Survey (USGS) ranked Colorado ninth among the states in nonfuel mineral value, up from 17th in 2004. About $1 billion of the nonfuel total is from metal mining. New record-high productions were achieved not only for molybdenum but also for coal and goal.

Mining Engineering↗
USGS2016

Persistent slip rate discrepancies in the eastern California (USA) shear zone

Understanding fault slip rates in the eastern California shear zone (ECSZ) using GPS geodesy is complicated by potentially overlapping strain signals due to many sub-parallel strike-slip faults and by inconsistencies with geologic slip rates. The role of fault system geometry in describing ECSZ deformation may be investigated with total variation regularization, which algorithmically determines a best-fitting geometry from an initial model with numerous faults, constrained by a western United States GPS velocity field. The initial dense model (1) enables construction of the first geodetically constrained block model to include all ECSZ faults with geologic slip rates, allowing direct geologic-geodetic slip rate comparisons, and (2) permits fault system geometries with many active faults that are analogous to distributed interseismic deformation. Beginning with 58 ECSZ blocks, a model containing 10 ECSZ blocks is most consistent with geologic slip rates, reproducing five of 11 within their reported uncertainties. The model fits GPS observations with a mean residual velocity of 1.5 mm/yr. Persistent geologic-geodetic slip rate discrepancies occur on the Calico and Garlock faults, on which we estimate slip rates of 7.6 mm/yr and <2 mm/yr, respectively, indicating that inconsistencies between geology and geodesy may be concentrated on or near these faults and are not due to pervasive distributed deformation in the region. Discrepancies may in part be due to postseismic relaxation following the A.D. 1992 M w 7.3 Landers and 1999 M w 7.1 Hector Mine earthquakes. Otherwise, resolving geologic-geodetic discrepancies would require as much as 11.4 mm/yr of off-fault deformation within <10 km of the main ECSZ faults, with ∼5 mm/yr concentrated near the Calico fault.

California↗
USGS1972

Mineral deposits of the northwestern Hijaz quadrangle, Kingdom of Saudi Arabia

A reconnaissance of portions of the Northwestern Hijaz quadrangle in the Kingdom of Saudi Arabia was made during 1964 and 1965 as part of a mineral survey of the Precambrian crystalline rocks of the country. The survey is being made under the terms of an agreement between the Saudi Arabia Ministry of Petroleum and Mineral Resources and the United States Geological Survey. Ancient gold and copper mines occur in the area, and deposits of iron minerals, chromite, copper minerals, asbestos, magnesite, gypsum, and glass sand have been discovered in recent years. The land surface of the quadrangle consists of a narrow coastal plain, a mountainous belt, and a plateau. The mountainous bolt is made up of Precambrian rocks that include three major stratigraphic units separated by unconformities. The two older units are slightly metamorphosed and are intruded by plutonic rocks of many kinds. Granitic rocks predominate but intrusions of syenite, diorite, gabbro, and peridotite are known. Dikes are abundant throughout the mountainous area. The Precambrian rocks have been folded on north- to northwest-trending axes. A major northwest-striking wrench fault zone crosses the central portion of the quadrangle. North-, northeast-, and east-trending faults are locally prominent. The plateau lies in the northeastern part of the quadrangle. It is made up of unmetamorphosed gently dipping sandstone of Paleozoic age overlain in part by flood basalts of Tertiary to Quaternary age. Sedimentary rocks of Miocene(?) age crop out in the coastal area. Gold was mined in the area during the eighth and ninth centuries A. D. The ancient gold mines were reexamined in the 1930s but wore found to be too small and too low grade for mining. Exploration for minerals other than gold began in 1950. The present work consisted of the examination of geological features that are potentially favorable for the presence of mineral deposits such as intrusive contacts, fault zones, quartz veins, and hydrothermally altered areas. Samples of wadi sediment were collected in areas that appeared most favorable. The samples were analyzed spectrographically for trace amounts of 27 elements to confirm the presence or absence of mineralization. Massive magnetite bodies that range in size from a few hundred to a few thousand tons wore discovered in the course of the work as well as widely scattered traces of secondary copper minerals. The wadi samples disclosed several areas that contain from 5 to 10 times the average trace amounts of base metals and molybdenum; these areas should be prospected in more detail.

Hijaz quadrangle↗
USGS1996

Gold placers of the historical Fortymile River region, Alaska

The Fortymile River region in east-central Alaska has a long and colorful history as the site of the first major gold discovery in interior Alaska. Placer gold has been mined in the region nearly every year since its original discovery in 1886. Total gold production is approximately 500,000 troy ounces. Although many of the rich deposits have been mined, there still exist areas that contain gold. Areas of mined and unmined gold-bearing creek and terrace gravels are outlined on the accompanying geologic map. The early history of the Fortymile area centered on the small frontier settlement of Fortymile City located at the junction of the Fortymile and Yukon Rivers in Canadian territory. This was the supply and jumping-off point for prospectors who worked their way into Alaska up the Fortymile River and found gold on many of its tributaries. Hand mining, both underground and surface, using sluice boxes and (or) rockers were the earliest methods; later, hydraulicking, dredging, and draglining methods were used. More recently, bulldozers and elevated trammels have been used, as well as very portable floating suction dredges. The rich mining lore of the area is closely associated with events of the nearby world-famous Klondike District. Bedrock and placer geology and mining history of individual gold-rich creeks are herein updated. The Fortymile area, which is part of the Yukon-Tanana Upland, contains quartzite, schist, gneiss, amphibolite, marble, serpentinite, and granite overlain by basalt, sandstone, conglomerate, shale, tuff, and coal; overlying these rocks are several deposits of varying ages consisting of gold-bearing gravel and colluvium. The close spatial association of creeks containing placer gold and the gneiss, schist, amphibolite, and marble unit strongly suggests this metamorphic unit is the gold source. High terrace gravels record a time from the late Tertiary to early Pleistocene when the ancestral Fortymile River and its major tributaries, the North and South Forks, had floodplains roughly 1 to 2 miles (2-3 kilometers) wide and gradients of about 4 feet per mile (0.75 meters per kilometer). Base-level lowering during the post-early Pleistocene caused the rivers to cut into their floodplains and to develop the youthful characteristics they have today such as V-shaped canyons, narrow floodplains, and gradients of at least twice those of the old river. Colluvium marginal to creek deposits in steep-sided valleys is often gold bearing. Much of the unconsolidated gravel within the major drainages of the Fortymile River, South Fork, North Fork, and Mosquito Fork is colluvium. Heavy-mineral-concentrate samples from the gold-producing creeks and high terrace gravels contain varying amounts of magnetite (20 to 80 percent) and ilmenite (10 to 30 percent), and samples from creeks draining areas principally composed of metamorphic rocks contain abundant garnet (10 to 30 percent). Gold fineness ranges from 620 to 927, but it is difficult to attach any geologic significance to the fineness data. Most placer gold in the Fortymile River area has been recovered at, or near, the gravelbedrock contact. The lowermost 3.3 feet (1 meter) of gravel and the uppermost 1.6 feet (0.5 meter) of bedrock may contain as much as 80 to 90 percent of the gold that is ultimately recovered. Gold nuggets are rare and most of the gold recovered is in the form of flattened fragments less than .2 inches (5 millimeters) in greatest dimension. However, large gold nuggets have been found on Wade Creek; examples are ones of 25,33,56, and 70 ounces. Occasionally, large nuggets may still be found in the tailing piles along the creek. The Fortymile River and its tributaries the South Fork, Walker Fork, and Mosquito Fork, all of which at one time were the sites of bucket-line dredge operations, now are almost exclusively mined using floating suction dredges. Unmined gold-bearing gravel is present in the floodplain of the Walker Fork valley below Cherry Creek and in low (about 100 to 130 feet or 30 to 40 meters) terraces along the north side of Walker Fork and east side of Cherry Creek. Considering the locations of where most gold has been found in the South Fork valley both by the older bucket dredges and the modern suction dredges, it seems likely that the tributary drainages of Lost Chicken, Napoleon, Franklin, and Buckskin Creeks have supplied the bulk of the gold to the South Fork valley. A quarter acre (0.10 hectare), 130-foot-thick ( 40 meters) section of the high terrace gravels on the north side of Napoleon Creek was mined for placer gold and yielded values estimated to be $8.50 per cubic yard (or $6.50 per cubic meter) at $350 per troy ounce. The unmined high terrace gravels on the south side of Buckskin Creek contain gold; however, this gravel is only 3 to 6.5 feet (1 to 2 meters) thick. The search for a lode gold source in the Fortymile River region may be in vain, because substantially more gold than has been recovered from the placers can be derived by the gradual erosion of large volumes of source rocks that contain background mean gold amounts. Using Leon's mass balance equation, 5,167 metric tons of gold may exist in the placers of the Fortymile River region, less than 1 percent of the recovered amount of 15.6 tons. The largest gold resource remaining in the Fortymile River region is probably in the high terrace gravels exposed along many of the creeks and rivers. Until there is exploratory drilling or a comprehensive sampling program, the amount of gold in these gravels will remain unknown. Environmental constraints imposed by Federal and State agencies have slowed, but not stopped, placer mining in the Fortymile River area, and a significant gold price rise would result in more mining.

Alaska↗
USGS2000

Assessment of mineral resource tracts in the Chugach National Forest, Alaska

Locatable minerals have been produced from the Chugach National Forest (CNF) for nearly 100 years. Past gold production has come from the Kenai Peninsula and the Girdwood, Port Wells, and Valdez areas. Copper and by-product gold and silver have been produced from mines at Ellamar, on Latouche Island, and near Valdez. Many of the past-producing properties were not mined out and contain significant inferred reserves of gold, copper, lead, zinc, and silver. This report outlines mineral resource areas (tracts) that contain both identified and undiscovered mineral resources. These tracts were drawn on the basis of one or more of the following criteria: (1) geochemical anomalies, (2) favorable geologic units, (3) presence of mines, prospects or mineral occurrences, and (4) geophysical anomalies. Bliss (1989) used six mineral deposit models to describe the types of deposits known from the CNF. Of these deposit types, only four are sufficiently known and defined in the CNF to be suitable for consideration in outlining and ranking of mineral resource tracts; these deposit types are: (1) Cyprus-type massive sulfide, (2) Chugach-type low-sulfide goldquartz veins, (3) placer gold, and (4) polymetallic vein. The U.S. Bureau of Mines indicated that most of the inferred mineral reserves in the CNF would not be economic to produce under current prices. Small-scale placer gold operations are a possible exception. Other known resources that have recorded past production (oil, coal, rock, sand, and gravel) are not addressed in this report.

Alaska↗
USGS2007

Environmental effects of historical mining in the Animas River watershed, southwestern Colorado

The U.S. Geological Survey has completed an extensive environmental study of the effects of historical mining on water and sediment quality and aquatic and riparian habitat in the Animas River watershed upstream from Silverton, Colorado. Results from this study are being used by Federal and State agencies and by the local watershed stakeholders group to implement remediation and cleanup activities. The Watershed Approach provides an effective means to rank and evaluate environmental impact of historical mining throughout a region: The mining-related sites that, upon evaluation, are shown to cause the greatest impact can become the subjects of remediation planning and implementation. This process helps land managers evaluate risk and focus remediation efforts on sites that may be the most deleterious to water quality and aquatic and riparian habitat.

Colorado↗
USGS2008

Geologic Field Notes, Geochemical Analyses, and Field Photographs of Outcrops and Rock Samples from the Big Delta B-1 Quadrangle, East-Central Alaska

The U.S. Geological Survey, in cooperation with the Alaska Department of Natural Resources Division of Mining, Land, and Water, has released a geologic map of the Big Delta B-1 quadrangle of east-central Alaska (Day and others, 2007). This companion report presents the major element oxide and trace element geochemical analyses, including those for gold, silver, and base metals, for representative rock units and for grab samples from quartz veins and mineralized zones within the quadrangle. Also included are field station locations, field notes, structural data, and field photographs based primarily on observations by W.C. Day with additions by J.M. O'Neill and B.M. Gamble, all of the U.S. Geological Survey. The data are provided in both Microsoft Excel spread sheet format and as a Microsoft Access database.

Open-File Report↗
USGS1980

Effects of coal mine subsidence in the Sheridan, Wyoming, area

Analyses of the surface effects of past underground coal mining in the Sheridan, Wyoming, area suggest that underground mining of strippable coal deposits may damage the environment more over long periods of time than would modern surface mining, provided proper restoration procedures are followed after surface mining. Subsidence depressions and pits are a continuing hazard to the environment and to man's activities in the Sheridan, Wyo., area above abandoned underground mines in weak overburden less than about 60 m thick and where the overburden is less than about 10-15 times the thickness of coal mined. In addition, fires commonly start by spontaneous ignition when water and air enter the abandoned mine workings via subsidence cracks and pits. The fires can then spread to unmined coal as they create more cavities, more subsidence, and more cracks and pits through which air can circulate. In modern surface mining operations the total land surface underlain by minable coal is removed to expose the coal. The coal is removed, the overburden and topsoil are replaced, and the land is regraded and revegetated. The land, although disturbed, can be more easily restored and put back into use than can land underlain by abandoned underground mine workings in areas where the overburden is less than about 60 m thick or less than about 10-15 times the thickness of coal mined. The resource recovery of modern surface mining commonly is much greater than that of underground mining procedures. Although present-day underground mining technology is advanced as compared to that of 25-80 years ago, subsidence resulting from underground mining of thick coal beds beneath overburden less than about 60 m thick can still cause greater damage to surface drainage, ground water, and vegetation than can properly designed surface mining operations. This report discusses (11 the geology and surface and underground effects of former large-scale underground coal mining in a 50-km 2 area 5-20 km north of Sheridan, Wyo., (2) a ground and aerial reconnaissance study of a 5-km^2 coal mining area 8-10 km west of Sheridan, and (31 some environmental consequences and problems caused by coal mining.

Professional Paper↗