Geology ReportsSearch

SEARCH · Geology Reports

Results for “Geographic Information Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources

The geography and geology of Alaska; a summary of existing knowledge, with a section on climate, and a topographic map and description thereof

Alaska, the largest outlying possession of the United States, is that great land mass forming the northwestern extremity of the North American continent, whose western point is within 60 miles of the Asiatic coast (PI. II). About one-quarter of this area lies within the Arctic Circle, and from the standpoint of geographic position must be regarded as an arctic province; but the southern seaboard, exposed to the warm winds and waters of the Pacific, gives to the entire southern portion of the territory" a comparatively warm climate. It is not generally realized that the range of climate in Alaska is greater than that between Florida and Maine. At the southernmost point of the Pacific coast the mean annual temperature is not far from that of the city of Washington, the winters being warmer and characterized by less snowfall; the Yukon Valley on the other hand has a winter climate similar to that of northern Montana and Dakota; while in the extreme northern part of the territory the meteorologic conditions are invariably arctic. Though as yet only sparsely settled, Alaska's vast area and great resources make it one of the most important possessions of the United States and promise its rapid development. During the years 1890 to 1900 the population increased from 32,052* to 63,592. The mineral output, which in 1890 was valued at less than $800,000, exceeded $9,000,000 in 1904, and the fisheries show a corresponding growth. This rapid development has attracted public attention and led to urgent demand for explorations, surveys, and other investigations. So actively has this work been pushed, both by public and private enterprise, that exact knowledge of the geography, geology, and mineral resources of the interior has made greater strides within the last eight years than during the preceding thirty-one years since the acquisition of Alaska. The facts regarding the geography and geology, scattered as they are through the many books and reports of this period, are not always readily accessible, and the time seems ripe to present them in a summarized form. The topography of Alaska is varied and complex (see PI. I), and it is not easy to present briefly even the salient features. The limited number of pages here devoted to the subject precludes the possibility of detailed treatment, even if the facts were available. Much of the description has been taken from the results attained by other investigators, the writer being personally familiar with only a part of this large province. A list of the publications consulted is appended. The larger geographic features of Alaska are now fairly well known, though the detailed surveys which are demanded by the development of many localities have hardly been begun. Preliminary surveys have been completed of all but three 8 of the larger rivers. The most important mountain ranges have been at least outlined (fig. 3). Only three large areas remain almost entirely unmapped: One in southwestern Alaska, between Cook Inlet and the lower Kuskokwim, and the others in northern Alaska, embracing the Arctic watershed east and west of the Colville River. Nearly all the surveys of the interior, however, have been of a preliminary and exploratory character, and to meet the requirements of exact geography must be followed by more detailed mensuration. Though the coast line has been fairly well known for more than half a century, knowledge of the interior has been gained chiefly within the last two decades. This has not yet found its way into text-books and has too often been entirely ignored by cartographers. If facts are presented which may seem elementary, it is because even well-informed people have been known to harbor misconceptions in regard to the orographic features, climate, and general character of Alaska. Those who read of the perils and privations of winter travel and explorations are apt to picture a region of ice and snow; others, again, who have personal knowledge of the tourist route of southeastern Alaska, regard the whole district as one of rugged mountains and glaciers. In point of fact, glaciers are now nearly limited to the ranges bordering the Pacific and to the two slopes of the Alaska range; and even during the greatest development of glaciers but a small portion of Alaska was under ice (see map, PI. XXII). As a treatise on geography would hardly be complete without some discussion of the climate, meteorologic data have been compiled by Mr. Cleveland Abbe, jr., but the discussion of this does not pretend to be more than a cursory treatment of the subject. The scope of the paper seems to require also a brief summary of the development of geographic knowledge of Alaska. This subject, with its many ramifications, is of fascinating interest and offers a magnificent field for the trained historian. If the accompanying sketch of discovery and exploration awakens any measure of popular interest the writer will feel amply rewarded for having attacked a theme which hardly falls within the scope of his investigations. When this compilation was begun it was intended to be chiefly a description of the topography of Alaska, as illustrated by the accompanying map (PI. XXXIV, in pocket), which was compiled under the direction of the late R. U. Goode. In the course of the work there accumulated much geologic as well as geographic material which seemed worthy of inclusion in the report. As no comprehensive statement of the geology of Alaska has been made since the modern epoch of investigation was begun, an attempt will be made to give a summary of all results achieved. Since the writer has obtained much of his knowledge of the facts from the work of others, he disclaims any pretense of making an entirely original contribution to geologic science. He feels, however, that a personal familiarity with a considerable part of the province, gained during seven consecutive seasons of field work, will justify Mm in presenting conclusions which may in some cases be at variance with those in the reports on which he must draw for his facts. Throughout this report attempt will be made to credit borrowed material to the source from which it is drawn. Where such matter has been obtained entirely from published reports there is no difficulty in so doing; but as regards investigators of the Geological Survey, with whom the writer has collaborated both in field and in office, the case is somewhat different, for it is not always possible to know whether this or that theory originated with the writer or with one of his colleagues. It will, then, perhaps suffice to state that this report could not have been prepared without the explorations and researches of the geologists, F. C. Schrader, Walter C. Mendenhall, Arthur J. Collier, J. E. Spurr, and Arthur C. Spencer; and the surveys of the topographers, T. G. Gerdine, D. C. Witherspoon, D. L. Reaburn, W. J. Peters, and E. C. Barnard. Each of these men, in the course of from two to six years of field work, has made important contributions to the knowledge of the geography and geology of Alaska, and not all of these results have yet been put in print. In the last season (1903) L. M. Prindle, C. W. Wright, Arthur Hollick, G. C. Martin, F. L. Hess, and Fred H. Moffit have carried on geologic work in Alaska, and the writer has made use of their work now in course of publication. He has also been fortunate in having access to the manuscript reports of Walter C. Mendenhall and F. C. Schrader on the Copper River basin, to which references will be made. The matter here presented should be credited in a measure to all of these investigators, but for many of the theories advanced the writer alone is responsible. As this manuscript goes to press there has been opportunity to incorporate some of the results of the field work of 1904. As far as possible these have been embodied in the text, but in some instances it has been found advisable to add them only as footnotes. During the past summer F. E. and C. W. Wright extended the geologic reconnaissance in southeastern Alaska. In southwestern Alaska G. C. Martin and T. W. Stanton have determined the general Mesozoic section, while F. H. Moffit has made a reconnaissance of the northern part of the Kenai Peninsula. A. J. Collier has mapped the geology of the Cape Lisburne region, and L. M. Prindle and F. L. Hess have made contributions to the knowledge of the metamorphic terranes of the Yukon-Tanana district. It is the writer's purpose to describe in nontechnical language the larger geographic features and discuss their relation as far as the data available will permit. In the treatment of the geology, however, less effort will be made to make the matter acceptable to the lay reader. It is hoped, however, that a brief summary of the salient features of the geologic history' may be not without interest to the general public. If this paper serves in some measure to dispel the popular fallacies regarding Alaska and to disseminate more accurate knowledge of its geographic and geologic features, the purpose of its publication will be accomplished.

Alaska

Atlas of nonindigenous marine and estuarine species in the North Pacific

Executive Summary Marine and estuarine nonindigenous species (NIS) are found across the world’s oceans, and designing effective management strategies to mitigate this economic, ecological and human health threat requires a basic understanding of the existing invasion patterns at regional to global scales. However, to date, syntheses at ocean basin scales have essentially been nonexistent. To fill the gap for the North Pacific, we synthesized the distributions, invasion history, environmental tolerances, and natural history of the near-coastal nonindigenous species (NIS) reported from the member countries of the North Pacific Marine Science Organization (PICES; United States, Canada, China, Republic of Korea, Japan, and Russia). The hierarchical “Marine Ecoregions of the World” (MEOW) biogeographic schema was used as the framework for assessing species’ distributions, with the modification that we added a “region” level to differentiate eastern and western sides of oceans. The two North Pacific regions are the Northeast Pacific (NEP), which extends from the Gulf of California to the Aleutian Islands, and the Northwest Pacific (NWP), which extends from the East China Sea to the Kamchatka Shelf. To have complete coverage of the United States, we included the MEOW Hawaii Ecoregion as a separate reporting unit. To have complete coverage of Japan and China, we combined five MEOW ecoregions in southern China and Japan into the North Central-Indo Pacific (NCIP) Region. The various types of information were synthesized in a Microsoft Access database, the “PICES Nonindigenous Species Information System”, which is further described in the “User’s Guide and Metadata for the PICES Nonindigenous Species Information System” (Lee et al., 2012). The PICES database was then used to generate two-page “species profiles” that map the native and introduced distributions of each species and provide a standardized summary of its invasion history, environmental tolerances, and natural history. These species profiles form the bulk of the “Atlas of Nonindigenous Marine and Estuarine Species in the North Pacific”. A total of 747 near-coastal nonindigenous species were identified in the PICES countries, with four phyla (Arthropoda, Chordata, Mollusca, and Annelida) constituting more than 70% of these invaders. The NEP and Hawaii have similar numbers of reported nonindigenous species, 368 and 347, respectively. In comparison, the NWP has about 60% of the number of reported NIS, 208. The NCIP contains only 73 NIS, though there is limited information for these ecoregions. When evaluated at an individual MEOW ecoregion scale, the Hawaii Ecoregion was the most invaded with 347 invaders, followed by the Northern California Ecoregion, which includes the San Francisco Estuary, with 287 NIS. The most invaded ecoregion in the NWP was the Central Kuroshio Current Ecoregion, which includes Tokyo Bay, with 87 reported NIS. Eight potential reasons for this geographical discrepancy in the extent of invasion were considered. The two most important appear to be: 1) the milder temperature regimes in the NEP and Hawaii are more conducive for NWP species to invade the NEP and Hawaii than the reverse and 2) there has been a greater search effort for NIS in Hawaii and the NEP at least for certain taxonomic groups. In terms of how the NIS were transported, hull fouling was potentially the most important vector in the NEP, NWP, and Hawaii, with ballast water discharges the second most important in all three regions. Intentional stocking and aquaculture escapees were relatively more important in the NWP than the NEP or Hawaii, reflecting the extensive aquaculture in Asia. Aquaculture associated species (i.e., aquaculture hitchhikers) was relatively important in the NEP, reflecting the historical influx of invaders with the importation of Atlantic and Pacific oysters.

Report

Potential pollutant sources in a Choptank River (USA) subwatershed and the influence of land use and watershed characteristics

Row-crop and poultry production have been implicated as sources of water pollution along the Choptank River, an estuary and tributary of the Chesapeake Bay. This study examined the effects of land use, subwatershed characteristics, and climatic conditions on the water quality parameters of a subwatershed in the Choptank River watershed. The catchments within the subwatershed were defined using advanced remotely-sensed data and current geographic information system processing techniques. Water and sediment samples were collected in May–October 2009 and April–June 2010 under mostly baseflow conditions and analyzed for select bacteria, nitrate-N, ammonium-N, total arsenic, total phosphorus (TP), orthophosphate (ortho-P), and particle-phase phosphorus (PP); n = 96 for all analytes except for arsenic, n = 136, and for bacteria, n = 89 (aqueous) and 62 (sediment). Detections of Enterococci and Escherichia coli concentrations were ubiquitous in this subwatershed and showed no correlation to location or land use, however larger bacterial counts were observed shortly after precipitation. Nitrate-N concentrations were not correlated with agricultural lands, which may reflect the small change in percent agriculture and/or the similarity of agronomic practices and crops produced between catchments. Concentration data suggested that ammonia emission and possible deposition to surface waters occurred and that these processes may be influenced by local agronomic practices and climatic conditions. The negative correlation of PP and arsenic concentrations with percent forest was explained by the stronger signal of the head waters and overland flow of particulate phase analytes versus dissolved phase inputs from groundwater. Service roadways at some poultry production facilities were found to redirect runoff from the facilities to neighboring catchment areas, which affected water quality parameters. Results suggest that in this subwatershed, catchments with poultry production facilities are possible sources for arsenic and PP as compared to catchment areas where these facilities were not present.

Choptank River

Mapping of Florida's coastal and marine resources: Setting priorities workshop

The importance of mapping habitats and bioregions as a means to improve resource management has become increasingly clear. Large areas of the waters surrounding Florida are unmapped or incompletely mapped, possibly hindering proper management and good decisionmaking. Mapping of these ecosystems is among the top priorities identified by the Florida Oceans and Coastal Council in their Annual Science Research Plan. However, lack of prioritization among the coastal and marine areas and lack of coordination of agency efforts impede efficient, cost–effective mapping. A workshop on Mapping of Florida’s Coastal and Marine Resources was sponsored by the U.S. Geological Survey (USGS), Florida Department of Environmental Protection (FDEP), and Southeastern Regional Partnership for Planning and Sustainability (SERPPAS). The workshop was held at the USGS Florida Integrated Science Center (FISC) in St. Petersburg, FL, on February 7-8, 2007. The workshop was designed to provide State, Federal, university, and non-governmental organizations (NGOs) the opportunity to discuss their existing data coverage and create a prioritization of areas for new mapping data in Florida. Specific goals of the workshop were multifold, including to: provide information to agencies on state-of-the-art technology for collecting data; inform participants of the ongoing mapping programs in waters off Florida; present the mapping needs and priorities of the State and Federal agencies and entities operating in Florida; work with State of Florida agencies to establish an overall priority for areas needing mapping; initiate discussion of a unified classification of habitat and bioregions; discuss and examine the need to standardize terminology and data collection/storage so that data, in particular habitat data, can be shared; identify opportunities for partnering and leveraging mapping efforts among agencies and entities; identify impediments and organizational gaps that hinder collection of data for mapping; seek innovative solutions to the primary obstacles identified; identify the steps needed to move mapping of Florida’s oceans and coasts forward, in preparation for a better coordinated, more cost-effective mapping program to allow State and Federal agencies to make better decisions on coastal-resource issues. Over 90 invited participants representing more than 30 State and Federal agencies, universities, NGOs, and private industries played a large role in the success of this two-day workshop. State of Florida agency participants created a ranked priority order for mapping 13 different regions around Florida. The data needed for each of the 13 priority regions were outlined. A matrix considering State and Federal priorities was created, utilizing input from all agencies. The matrix showed overlapping interests of the entities and will allow for partnering and leveraging of resources. The five most basic mapping needs were determined to be bathymetry, high-vertical resolution coastline for sea-level rise scenarios, shoreline change, subsurface geology, and benthic habitats at sufficient scale. There was a clear convergence on the need to coordinate mapping activities around the state. Suggestions for coordination included: creating a glossary of terms: a standard for specifying agency data-mapping needs; creating a geographic information officer (GIO) position or permanent organizing group to maintain communications established at this workshop and to maintain progress on the issues identified during the workshop. The person or group could develop a website, maintain a project-status matrix, develop a list of contacts, create links to legislative updates and links to funding sources; developing a web portal and one-stop/clearinghouse of data. There was general consensus on the need to adopt a single habitat classification system and a strategy to accommodate existing systems smoothly. Unresolved aspects of the systems warrant that a separate workshop would be needed to work out details. Participants recognized that the State priority list would necessarily be updated periodically. An annual review of priorities would facilitate information exchange, mapping activities updates, and re-allocation of funding among changing priorities. It was recognized that mapping of State waters would take billions of dollars and in light of tightening budgets there was need for processes that could be used to appropriate or leverage monies for mapping and reduce data-collection costs. Fourteen different avenues were explored. There was a clear consensus that the linking of public to private partnerships to support mapping was imperative, and ways to achieve this were discussed.

Florida

Movements of Atlantic Sturgeon of the Gulf of Maine inside and outside the geographically defined Distinct Population Segment

Identification of potential critical habitat, seasonal distributions, and movements within and between river systems is important for protecting the Gulf of Maine (GOM) Distinct Population Segment of Atlantic Sturgeon. To accomplish these objectives, we captured Atlantic Sturgeon in four GOM rivers (Penobscot, Kennebec system, Saco, and Merrimack), and tagged 144 (83.3–217.4 cm TL) internally with uniquely coded acoustic transmitters. Tagged fish were detected between 2006 to 2014 by primary receiver arrays deployed in the four GOM rivers or opportunistically on a secondary group of receivers deployed within the GOM and along the continental shelf. Atlantic Sturgeon tagged in the four rivers were documented at three spawning areas in the Kennebec system in June and July, including one that became accessible in 1999 when the Edwards Dam was removed. After being tagged, the majority (74%) of Atlantic sturgeon were detected in the estuaries of the four GOM rivers, primarily from May through October. Tagged fish spent most of their time in saline water in the Saco River and Merrimack River, moved into brackish water in the Penobscot River, and were found in saline, brackish, and fresh water in the Kennebec system. Approximately 70% of the tagged fish were detected in GOM coastal waters, and aggregated in the Bay of Fundy (May–January), offshore of the Penobscot River (September-February and May), offshore of the Kennebec River (September–February), in Saco Bay and the Scarborough River (July–November), and along the eastern Massachusetts coast between Cape Ann and Cape Cod (April–February). Nine tagged Atlantic sturgeon (7%) left the GOM, three of which moved as far north as Halifax in Canada and six moved as far south as the James River in Virginia. Information from this study will be used to make recommendations to avoid, reduce or mitigate the impacts of in-water projects and on Atlantic sturgeon.

Maine, Massachusetts, New Hampshire

Science support for evaluating natural recovery of polychlorinated biphenyl concentrations in fish from Crab Orchard Lake, Crab Orchard National Wildlife Refuge, Illinois

Introduction Crab Orchard Lake in southern Illinois is one of the largest and most popular recreational lakes in the state. Construction of the nearly 7,000-acre reservoir in the late 1930s created employment opportunities through the Works Progress Administration, and the lake itself was intended to supply water, control flooding, and provide recreational opportunities for local communities (Stall, 1954). In 1942, the Department of War appropriated or purchased more than 20,000 acres of land around Crab Orchard Lake and constructed the Illinois Ordnance Plant, which manufactured bombs and anti-tank mines during World War II. After the war, an Act of Congress transferred the property to the U.S. Department of the Interior. Crab Orchard National Wildlife Refuge was established on August 5, 1947, for the joint purposes of wildlife conservation, agriculture, recreation, and industry. Production of explosives continued, but new industries also moved onsite. More than 200 tenants have held leases with Crab Orchard National Wildlife Refuge and have operated a variety of manufacturing plants (electrical components, plated metal parts, ink, machined parts, painted products, and boats) on-site. Soils, water, and sediments in several areas of the refuge were contaminated with hazardous substances from handling and disposal methods that are no longer acceptable environmental practice (for example, direct discharge to surface water, use of unlined landfills). Polychlorinated biphenyl (PCB) contamination at the refuge was identified in the 1970s, and a PCB-based fish-consumption advisory has been in effect since 1988 for Crab Orchard Lake. The present advisory covers common carp ( Cyprinus carpio ) and channel catfish ( Ictalurus punctatus ); see Illinois Department of Public Health (2017). Some of the most contaminated areas of the refuge were actively remediated, and natural ecosystem recovery processes are expected to further reduce residual PCB concentrations in the lake. The U.S. Fish and Wildlife Service sought technical support to understand environmental drivers of current (2017) PCB residues in fish tissue and patterns in PCB residues through time to inform the fish-consumption advisory for Crab Orchard Lake. This project is planned in two phases (Tasks 1 and 2); the first phase is included in this report. Task 1, reported here, includes a review of existing literature and a brief overview focused on environmental and biochemical/physiological processes that drive PCB residues in fish tissue. This review specifically targets processes that are relevant for freshwater lacustrine environments such as those at Crab Orchard Lake. In addition to discussions of environmental fate, metabolism, and accumulation of PCBs, this review includes a brief scientifically based explanation of approaches used to establish fish-consumption advisories. A planned second task (Task 2) will include a compilation and summary of existing data on PCB residues in fish tissue samples from Crab Orchard Lake. This summary will also place Crab Orchard Lake data in a broader geographic context through a comparison with fish data from other Midwestern lakes. When Task 1 and Task 2 are complete, resource managers will have (a) a synthesis of existing literature that characterizes the processes influencing the fate of residual PCBs remaining in systems such as Crab Orchard Lake, (b) a summary of natural PCB attenuation processes for use in risk communication with the public, and (c) a summary of existing data on PCBs in fish tissues from Crab Orchard Lake, including exploratory plots of tissue residues through time. Overall, this project will provide data to help resource managers better understand the ecological and public health consequences of residual PCBs in Crab Orchard Lake.

Illinois

Evolutionary dynamics inform management interventions of a hanging garden obligate, Carex specuicola

Uncovering the historical and contemporary processes shaping rare species with complex distributions is of growing importance due to threats such as habitat destruction and climate change. Species restricted to specialized, patchy habitat may persist by virtue of life history characteristics facilitating ongoing gene flow and dispersal, but they could also reflect the remnants of formerly widespread, suitable habitat that existed during past climate regimes. If formerly widespread species did not rely upon traits facilitating high dispersibility to persist, contemporary populations could be at high risk of extirpation or extinction. Fortunately, genomic investigations provide an opportunity to illuminate such alternative scenarios while simultaneously offering guidance for future management interventions. Herein, we test the role of these mechanisms in shaping patterns of genomic diversity and differentiation across a highly restricted and rare ecosystem: desert hanging gardens. We focus on Carex specuicola (Cyperaceae), a hanging garden obligate narrowly distributed in the Four Corners region of the southwestern United States that is listed as Threatened under the United States Endangered Species Act. Population structure and diversity analyses reveal that hanging garden populations are shaped by strong genetic drift, but that individuals in gardens are occasionally more closely related to individuals at other gardens than to individuals within the same garden. Similarly, gardens separated by long geographic distances may contain individuals that are more closely related compared to individuals in gardens separated by short geographic distances. Demographic modeling supports historical gene flow between some contemporary garden pairs, which is corroborated by low estimates of inbreeding coefficients and recent divergence times. As such, multiple lines of evidence support dispersal and gene flow across C. specuicola populations at both small and large spatial scales, indicating that even if C. specuicola was formerly more widespread, it may be well suited to persist in hanging gardens so long as suitable habitat remains available. Analyses like those demonstrated herein may be broadly applicable for understanding the short- and long-term evolutionary processes influencing rare species, and especially those having complex distributions across heterogeneous landscapes.

Arizona, Utah

EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired pre-Hurricane Sandy on October 18, 22, 23, and 26, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York

EAARL-B coastal topography: eastern New Jersey, Hurricane Sandy, 2012: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for a portion of the New Jersey coastline beachface, acquired pre-Hurricane Sandy on October 26, and post-Hurricane Sandy on November 1 and November 5, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New Jersey

EAARL Coastal Topography-Chandeleur Islands, Louisiana, 2010: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and submerged topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Chandeleur Islands, acquired March 3, 2010. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

EAARL Coastal Topography-Maryland and Delaware, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Maryland and Delaware coastline beachface, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

The Circumpolar Arctic vegetation map

Question: What are the major vegetation units in the Arctic, what is their composition, and how are they distributed among major bioclimate subzones and countries? Location: The Arctic tundra region, north of the tree line. Methods: A photo-interpretive approach was used to delineate the vegetation onto an Advanced Very High Resolution Radiometer (AVHRR) base image. Mapping experts within nine Arctic regions prepared draft maps using geographic information technology (ArcInfo) of their portion of the Arctic, and these were later synthesized to make the final map. Area analysis of the map was done according to bioclimate subzones, and country. The integrated mapping procedures resulted in other maps of vegetation, topography, soils, landscapes, lake cover, substrate pH, and above-ground biomass. Results: The final map was published at 1:7 500 000 scale map. Within the Arctic (total area = 7.11 x 106 km 2), about 5.05 ?? 106 km2 is vegetated. The remainder is ice covered. The map legend generally portrays the zonal vegetation within each map polygon. About 26% of the vegetated area is erect shrublands, 18% peaty graminoid tundras, 13% mountain complexes, 12% barrens, 11% mineral graminoid tundras, 11% prostrate-shrub tundras, and 7% wetlands. Canada has by far the most terrain in the High Arctic mostly associated with abundant barren types and prostrate dwarf-shrub tundra, whereas Russia has the largest area in the Low Arctic, predominantly low-shrub tundra. Conclusions: The CAVM is the first vegetation map of an entire global biome at a comparable resolution. The consistent treatment of the vegetation across the circumpolar Arctic, abundant ancillary material, and digital database should promote the application to numerous land-use, and climate-change applications and will make updating the map relatively easy. ?? IAVS; Opulus Press.

Journal of Vegetation Science

EAARL-B submerged topography: Barnegat Bay, New Jersey, post-Hurricane Sandy, 2012-2013

These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Barnegat Bay, New Jersey, acquired post-Hurricane Sandy on November 1, 5, 16, 20, and 30, 2012; December 5, 6, and 21, 2012; and January 10, 2013. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site .

New Jersey

Combining ecological and genomic diversity surveys to inform conservation and restoration of an endangered wetland plant, soft salty bird’s-beak (Chloropyron molle ssp. molle)

Emergent tidal wetlands are declining globally as a result of sea level rise and land use change. This habitat loss can keenly affect rare plant species within wetlands, and may require restoration to meet species recovery goals related to retaining populations throughout species' ranges. Soft salty bird’s-beak ( Chloropyron molle ssp. molle ) is a federally- and state-endangered hemi-parasitic plant that occurs at the upper marsh transition zone in the San Francisco Bay–Delta, California, USA. We combined field surveys to document habitat associations and trends in abundance with genomic surveys to understand patterns of genetic structure in this rare endemic. We found that C . molle ssp. molle persisted at nine previously occupied marsh sites, although four sites (Hill Slough, MOTCO East, Fagan Marsh, and Joice Island) were smaller in population size than when surveyed in the 1990s. Additionally, twelve sites contained plots with suitable but unoccupied habitat that could be further assessed for restoration. Genomic analysis of over 40,000 single-nucleotide polymorphisms (SNPs) and 253 individuals grouped C . molle ssp. molle into six to seven regional genetic clusters with isolation by distance, and confirmed that C . molle ssp. molle is genetically distinct from adjacent populations of its closest relative ( C . molle ssp. hispidum ). The western-most C . molle ssp. molle sites of Point Pinole and Fagan Marsh were the most genetically and geographically isolated and had the lowest genome-wide diversity. Heterozygosity in sets of genes associated with tidal elevation, salinity, and annual and summer precipitation varied independently across populations. Overall, these genomic patterns indicate that selecting donor sites with similar environmental conditions and utilizing composite seeding approaches from multiple sites could allow for local adaptation to a range of possible environmental conditions. This comprehensive survey of habitat and genomic patterns can allow for the development of restoration actions and build climate-adaptation planning to help prevent the loss of a rare plant.

California

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

Project Description These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Coastal and Marine Geology Program (CMGP), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 17 and 18, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

Data Series