Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Exploration Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2022

Science mission requirements for a globally ranging, riserless drilling vessel for U.S. Scientific Ocean Drilling

Through the collection and analysis of shallow and deep subseafloor sediments, rocks, fluids, and life, scientific ocean drilling has enriched our understanding of the complex Earth system. Among other achievements, scientific ocean drilling has documented the history of Earth’s climate, the waxing and waning of polar ice sheets, the past changes in ocean and atmospheric circulation, the existence and function of microbial life in the subseafloor, the compositional variations in Earth’s crust and underlying mantle, and the physical and chemical processes acting at subduction zones, including those associated with tsunamigenic earthquakes. Over the decades, more than 12,000 articles that depend on analyses of scientific ocean drilling samples and geophysical data have been published, many detailing breakthrough contributions to global knowledge about the Earth system. Approximately 45% of these publications were led by U.S.-affiliated authors (International Ocean Discovery Program Publication Services, 2021). Since the mid-1980s, the workhorse of this multidisciplinary, international research effort has been the riserless D/V JOIDES Resolution, operated by Texas A&M University with funding from the U.S. National Science Foundation (NSF). D/V JOIDES Resolution has conducted the vast majority of scientific ocean drilling expeditions and collected most of the scientific cores over that period, including 82% of the expeditions and 93% of the cores in the last decade alone, despite being one of three platforms that is operated within the International Ocean Discovery Program. However, D/V JOIDES Resolution is approaching the end of its useful life. With a strong commitment to continue scientific ocean drilling beyond the end of the current phase, the community developed a document outlining the research frontiers that should be pursued. Exploring Earth by Scientific Ocean Drilling: 2050 Science Framework (Koppers and Coggon, 2020) describes seven scientific strategic objectives that focus on understanding interconnections within the Earth system and five flagship initiatives that integrate these objectives into long-term research efforts that address issues facing society. Additional elements in the 2050 Science Framework, including STEM education, workforce development, technology development, and innovative applications of data analytics, will advance the goals of scientific ocean drilling. Addressing the 2050 Science Framework also requires building partnerships with allied U.S. and international science programs and strengthening existing ones. To implement a significant portion of the 2050 Science Framework, the U.S. scientific community seeks to lease or acquire a newly built, globally ranging, state-of-the art, riserless drilling vessel. The many and varied technical and human resources requirements for successful accomplishment of scientific and educational goals summarized in this document and described in detail in the 2050 Science Framework require broad community input and careful consideration. Following receipt of NSF’s formal Request for Assistance to the United States Science Support Program (USSSP), the U.S. scientific ocean drilling community conducted a one-year exercise to identify its national scientific needs and priorities in order to determine the Science Mission Requirements (SMRs) presented here. This community effort included: (1) a U.S. community-wide survey to identify the specific operational and technical capabilities critical to addressing science in the 2050 Science Framework; (2) a series of online workshops focusing on critical capabilities identified by the survey; and (3) a large in-person workshop to synthesize the results of the survey and the virtual workshops (Appendix 1). The approach was designed to reach as many participants as possible. Overall, 278 survey responses were received from U.S. community members, representing 104 unique institutions from 39 states and the District of Columbia, and 137 unique individuals participated in the workshops (Appendix 2). The results of this effort comprise two classes of SMRs: Foundational Science Mission Requirements and Primary Science Mission Requirements. Foundational SMRs define minimum criteria for a new riserless drilling vessel that can address significant portions of the 2050 Science Framework. Primary SMRs build upon the Foundational SMRs and will create more robust science opportunities and data collection capabilities, will increase progress in addressing the 2050 Science Framework objectives, and will provide more real-time ship-to-shore interaction to improve science productivity, engagement, and outreach. Modern safety and environmental standards, including meeting standards to access protected waters such as exclusive economic zones, extended continental shelves, or high latitudes, while being cognizant of the vessel’s environmental footprint. Safe and efficient operations in global locations and in water depths from 70 m to 6000+ m, with total drill string length of at least 7000 m. High-quality core and data collection from a range of key subseafloor environments. Advanced heave compensation, dynamic positioning, and drill pipe stability. Modern mud and cement/casing systems. Critical onboard measurements for safety, operational decision-making, documentation of ephemeral properties, mission-specific science, and long-term science goals that extend beyond a single expedition. Designated and appropriate space for sample and data preservation. Highly skilled onboard personnel, including technical staff for curation and core handling; support for safety, time-sensitive, and critical shipboard measurements; computer support; equipment and instrument repair; application support; and data assurance. Primary Science Mission Requirements include: Flexible shipboard space for laboratories and on deck to ensure safe, successful implementation of diverse science objectives and operations. Minimizing contamination of recovered samples. Over-the-side capabilities for science-supporting technology (e.g., remotely operated vehicles, water- column sampling, sediment-water interface sampling). Downhole logging and measurements. Expanded borehole observatory capabilities. Reliable and consistent ship-to-shore communications. NSF’s investment in a new globally ranging, riserless drilling vessel will have a powerful economic multiplier effect, including the infusion of additional science support funds in the United States for training and research, the development of new technologies and tools, and the associated scientific and technical workforce development. The skills and knowledge gained through scientific ocean drilling are translatable to careers in fields such as sustainable energy development (e.g., geothermal and offshore wind), carbon sequestration, data management and cyberinfrastructure, biotechnology, communications, science education, policy, hazard mitigation, and environmental management. The United States is a leader in a well-established and internationally collaborative scientific ocean drilling community. A modern, globally ranging, riserless drilling vessel will allow the United States to expand its leadership position, address broad scientific questions that current capabilities preclude, and cultivate equitable international, multidisciplinary collaborations that will ensure scientific ocean drilling’s future success.

Report↗
USGS2023

Spatial and temporal analysis of geologic slip rates, Cucamonga Fault, California, USA: Implications for along-strike applications and multi-fault rupture

To constrain fault processes and hazard, fault slip rates may be extrapolated over different fault lengths or time intervals. Here, we investigate slip rates for the Cucamonga Fault (CF). The CF is located at the junction of the Transverse Range fault system with the San Andreas and San Jacinto Faults, and it is hypothesized to connect with these faults, promoting the propagation of large, multi-fault earthquakes. Previous work has shown that CF displacements on late Quaternary alluvial fan surfaces are highly variable along strike. We present two new 10 Be surface exposure ages from depth profiles on the alluvial fans. Slip rates are consistent with a rate of 1.4 ± 0.3 m/kyr over time intervals of ∼20, ∼30, and ∼40 kyr. If the CF participates in multi-fault ruptures, then these earthquakes occur either rarely or with sufficient regularity to maintain apparently steady rates over multiple intervals. We also explore along-strike fault displacement variability using a calibrated morphological model. The model successfully reproduces scarp profiles and indicates that fault displacement variability can be explained in part by scarp age but not uplift rate. We infer that both erosion by ephemeral gullying and distributed deformation contribute to fault displacement variability, although both are difficult to detect confidently without excavations across the scarp. These investigations show that better characterization of cumulative-slip variability along strike may improve accuracy and precision of slip rates. Slip rates that do not consider epistemic uncertainties may not be suitable for extrapolation over longer fault sections.

California↗
USGS1976

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report↗
USGS2018

The Global food‐energy‐water nexus

Water availability is a major factor constraining humanity's ability to meet the future food and energy needs of a growing and increasingly affluent human population. Water plays an important role in the production of energy, including renewable energy sources and the extraction of unconventional fossil fuels that are expected to become important players in future energy security. The emergent competition for water between the food and energy systems is increasingly recognized in the concept of the “food‐energy‐water nexus.” The nexus between food and water is made even more complex by the globalization of agriculture and rapid growth in food trade, which results in a massive virtual transfer of water among regions and plays an important role in the food and water security of some regions. This review explores multiple components of the food‐energy‐water nexus and highlights possible approaches that could be used to meet food and energy security with the limited renewable water resources of the planet. Despite clear tensions inherent in meeting the growing and changing demand for food and energy in the 21st century, the inherent linkages among food, water, and energy systems can offer an opportunity for synergistic strategies aimed at resilient food, water, and energy security, such as the circular economy.

Reviews of Geophysics↗
USGS2013

Representation of ecological systems within the protected areas network of the continental United States

If conservation of biodiversity is the goal, then the protected areas network of the continental US may be one of our best conservation tools for safeguarding ecological systems (i.e., vegetation communities). We evaluated representation of ecological systems in the current protected areas network and found insufficient representation at three vegetation community levels within lower elevations and moderate to high productivity soils. We used national-level data for ecological systems and a protected areas database to explore alternative ways we might be able to increase representation of ecological systems within the continental US. By following one or more of these alternatives it may be possible to increase the representation of ecological systems in the protected areas network both quantitatively (from 10% up to 39%) and geographically and come closer to meeting the suggested Convention on Biological Diversity target of 17% for terrestrial areas. We used the Landscape Conservation Cooperative framework for regional analysis and found that increased conservation on some private and public lands may be important to the conservation of ecological systems in Western US, while increased public-private partnerships may be important in the conservation of ecological systems in Eastern US. We have not assessed the pros and cons of following the national or regional alternatives, but rather present them as possibilities that may be considered and evaluated as decisions are made to increase the representation of ecological systems in the protected areas network across their range of ecological, geographical, and geophysical occurrence in the continental US into the future.

PLoS ONE↗
USGS1985

Geologic characteristics of sediment- and volcanic-hosted disseminated gold deposits - Search for an occurrence model

The current expansion of resource information, particularly on "disseminated" gold, and the improved technologies now available for resource investigations should place us in an enhanced position for developing a better predictive methodology for meeting one of the important responsibilities of the U.S. Geological Survey-to examine and assess the mineral resources of the geologic terranes composing the public (and privately owned) lands of the United States. The first step is systematic organization of these data. Geologic-occurrence models are an effective systematic method by which to organize large amounts of resource information into a logical sequence facilitating its use more effectively in meeting several industry and Survey objectives, which include the exploration for resources and the assessment of resource potential for land-use decisions. Such models also provide a scientific basis for metallogenesis research, which considers the observable features or attributes of ore occurrence and their "fit" into the Earth's resource puzzle. The use of models in making resource assessments/appraisals was addressed by Shawe (1981), who reported the results of a workshop on methods for resource appraisal of Wilderness and Conterminous United States Mineral Appraisal Program (CUSMAP; 1:250,000-scale quadrangles) areas. The Survey's main objective in the 1982 workshop was to evaluate the status of knowledge about disseminated or very fine grained gold deposits and, if possible, to develop an occurrence model(s). This report on the workshop proceedings has three main objectives: (1) Education through the publication of a summary review and presentation of new thinking and observations about the scientific bases for those geologic processes and environments that foster disseminated gold-ore formation; (2) systematic organization of available geologic, geochemical, and geophysical information for a range of typical disseminated gold deposits (including recognition of gaps in those data); and (3) assessment of current understanding (as presented in objective 2) toward formulating an empirical ore-occurrence model for this type of deposit. As such, this volume represents a preliminary first step at classification and provides a source of pertinent background information. Readers of this volume will soon discover, however, that full agreement has not yet been achieved in the interpretation of some of the geologic evidence. The resulting variations in tentative occurrence models for these controversial deposits ultimately will be resolved by filling the gaps in information that have already been identified. Thus, this volume does not report a U.S. Geological Survey consensus; the conclusions expressed in each chapter represent the particular interpretations of the various workshop participants.

Arizona, California, Idaho, Nevada, Utah↗
USGS1976

Geologic appraisal of the petroleum potential of offshore southern California; the borderland compared to onshore coastal basins

Offshore southern California is part of a much larger Pacific continental margin, and the two areas have a similar geologic history at least as far back as middle Tertiary time. Assessment of the petroleum potential of the offshore Southern California borderland is accomplished by examining the adjacent highly explored productive coastal basins in the tectonically unstable area west of the San Andreas fault. Known oil and gas accumulations in this region can be characterized as follows: 88 percent comes from the Los Angeles and Ventura basins; 87 percent has been found in late Miocene and younger strata and only 0.2 percent has been found in Eocene strata; 80 percent has been found in thick deposits of deep-water turbidite reservoirs; and 5 percent has been found in fractured Miocene siliceous shale reservoirs. The percentage of siliceous shale reservoirs will increase as a result of recent discoveries in this rock type in the Santa Barbara Channel. Of the 212 known fields only 5 are giants (greater than 500 million barrels), and these fields account for 52 percent of all past production from the region. Most fields are faulted anticlines, and the largest fields have the highest oil recoveries per acre. Geologic knowledge of the offshore is limited by the availability of data. Data have been obtained from geophysical surveys, analyses of bedrock samples from the sea floor, and extrapolations of data from the mainland and offshore islands. Several factors have a negative effect on the assessment of the petroleum potential of the southern California borderland. They are: 1. The Neogene section is relatively thin, and the Paleogene section is thin and has a limited distribution. 2. Over large areas, Miocene sediments apparently rest directly on basement. 3. Along much of the Santa Rosa-Cortes Ridge, sediments are uplifted and truncated, exposing Paleogene rocks. 4. Organic content in Paleogene sediments is believed too low to generate large amounts of petroleum. 5. Source rocks are immature, even in sediments as old as Eocene. 6. Burial and thermal history are insufficient for the generaton of hydrocarbons over much of the borderland area. 7. Documented oil and gas seeps are unknown seaward of the Channel Islands. 8. Limited exploratory drilling nearshore, the best prospective area, has not been favorable. 9. Adequate or thick reservoirs of deep-water turbidire origin are not evident. These negative factors are partly offset by the following positive factors: 1. Miocene sediments are excellent potential source rocks. 2. Asphaltic oil in rocks of Monterey-type lithology may be generated at lower than normal temperatures. 3. Shallow-water sands of reservoir quality possibly are present in the uppermost Paleogene and lowermost Neogene section. 4. Potential structural traps may be analogous to major structural producing trends onshore. 5. Fractured shale reservoirs may be present along flanks of major banks and ridges. 6. Buried and unsampled Paleogene and Late Cretaceous sediments may be better source rocks than those sampled and measured. The southern California borderland, although a part of a locally rich petroliferous region, has no known basins with geologic histories or characteristics similar to the Los Angeles and Ventura basins. Some offshore basins are similar to less endowed basins in terms of petroleum potential such as the Santa Maria and Salinas basins. Areas with the best petroleum potential may be in deep water (greater than 500 m). Some of the past high estimates of the petroleum potential may have been overstated; the existing geologic data tend to substantiate low estimates of 0.6 to 5.8 billion barrels of oil and 0.6 to 5.8 trillion ft3 of gas for the southern California borderland at the 5 and 95 percent probability level.

Circular↗
USGS2017

Connecting crustal seismicity and earthquake-driven stress evolution in Southern California

Tectonic stress in the crust evolves during a seismic cycle, with slow stress accumulation over interseismic periods, episodic stress steps at the time of earthquakes, and transient stress readjustment during a postseismic period that may last months to years. Static stress transfer to surrounding faults has been well documented to alter regional seismicity rates over both short and long time scales. While static stress transfer is instantaneous and long lived, postseismic stress transfer driven by viscoelastic relaxation of the ductile lower crust and mantle leads to additional, slowly varying stress perturbations. Both processes may be tested by comparing a decade-long record of regional seismicity to predicted time-dependent seismicity rates based on a stress evolution model that includes viscoelastic stress transfer. Here we explore crustal stress evolution arising from the seismic cycle in Southern California from 1981 to 2014 using five M ≥6.5 source quakes: the M 7.3 1992 Landers, M6.5 1992 Big Bear, M 6.7 1994 Big Bear, M 7.1 1999 Hector Mine, and M 7.2 2010 El Mayor-Cucapah earthquakes. We relate the stress readjustment in the surrounding crust generated by each quake to regional seismicity using rate-and-state friction theory. Using a log likelihood approach, we quantify the potential to trigger seismicity of both static and viscoelastic stress transfer, finding that both processes have systematically shaped the spatial pattern of Southern California seismicity since 1992.

California↗
USGS2011

Widespread seismicity excitation throughout central Japan following the 2011 M=9.0 Tohoku earthquake and its interpretation by Coulomb stress transfer

We report on a broad and unprecedented increase in seismicity rate following the M=9.0 Tohoku mainshock for M ≥ 2 earthquakes over inland Japan, parts of the Japan Sea and Izu islands, at distances of up to 425 km from the locus of high (≥15 m) seismic slip on the megathrust. Such an increase was not seen for the 2004 M=9.1 Sumatra or 2010 M=8.8 Chile earthquakes, but they lacked the seismic networks necessary to detect such small events. Here we explore the possibility that the rate changes are the product of static Coulomb stress transfer to small faults. We use the nodal planes of M ≥ 3.5 earthquakes as proxies for such small active faults, and find that of fifteen regions averaging ~80 by 80 km in size, 11 show a positive association between calculated stress changes and the observed seismicity rate change, 3 show a negative correlation, and for one the changes are too small to assess. This work demonstrates that seismicity can turn on in the nominal stress shadow of a mainshock as long as small geometrically diverse active faults exist there, which is likely quite common.

Geophysical Research Letters↗
USGS2020

The influence of frost weathering on the debris flow sediment supply in an alpine basin

Rocky, alpine mountains are prone to mass wasting from debris flows. The Chalk Cliffs study area (central Colorado, USA) produces debris flows annually. These debris flows are triggered when overland flow driven by intense summer convective storms mobilizes large volumes of sediment within the channel network. Understanding the debris flow hazard in this, and similar alpine settings, requires determining the magnitude of sed- iment accumulation between debris flow seasons, and identifying the control on sediment production. To address these knowledge gaps, we measured changes in sediment produc- tion using a sediment retention fence to quantify how sedimentation was influenced by temperature at the plot scale. These measurements were extrapolated to a larger area, where we extended the sediment fence results to explore how rockfall sedimentation con- tributed to channel refilling between active debris flow periods. This work shows debris flow channel refilling is correlated with low temperatures and time in the frost-cracking window, implicating frost weathering mechanisms as a key driver of sedimentation. This sediment production process resulted in a large amount of sediment accumulation dur- ing a single winter season in our study reach (up to 0.4 m in some locations). Using these observations, we develop a channel refilling model that generally describes the mass bal- ance of debris flow watersheds in alpine areas.

Colorado↗
USGS2021

Identification of low-frequency earthquakes on the San Andreas fault with deep learning

Low-frequency earthquakes are a seismic manifestation of slow fault slip. Their emergent onsets, low amplitudes, and unique frequency characteristics make these events difficult to detect in continuous seismic data. Here, we train a convolutional neural network to detect low-frequency earthquakes near Parkfield, CA using the catalog of Shelly (2017), https://doi.org/10.1002/2017jb014047 as training data. We explore how varying model size and targets influence the performance of the resulting network. Our preferred network has a peak accuracy of 85% and can reliably pick low-frequency earthquake (LFE) S-wave arrival times on single station records. We demonstrate the abilities of the network using data from permanent and temporary stations near Parkfield, and show that it detects new LFEs that are not part of the Shelly (2017), https://doi.org/10.1002/2017jb014047 catalog. Overall, machine-learning approaches show great promise for identifying additional low-frequency earthquake sources. The technique is fast, generalizable, and does not require sources to repeat.

Geophysical Research Letters↗
USGS2006

Integrated exploration for low-temperature geothermal resources in the Honey Lake Basin, California

An integrated exploration study is presented to locate low-temperature geothermal reservoirs in the Honey Lake area of northern California. Regional studies to locate the geothermal resources included gravity, infra-red, water-temperature, and water-quality analyses. Five anomalies were mapped from resistivity surveys. Additional study of three anomalies by temperature-gradient and seismic methods was undertaken to define structure and potential of the geothermal resource. The gravity data show a graben structure in the area. Seismic reflection data indicate faults associated with surface-resistivity and temperature-gradient data. The data support the interpretation that the shallow reservoirs are replenished along the fault zones by deeply circulating heated meteoric waters.

California↗
USGS2006

Active dust devils in Gusev crater, Mars: Observations from the Mars Exploration Rover Spirit

A full dust devil "season" was observed from Spirit from 10 March 2005 (sol 421, first active dust devil observed) to 12 December 2005 (sol 691, last dust devil seen); this corresponds to the period Ls 173.2?? to 339.5??, or the southern spring and summer on Mars. Thermal Emission Spectrometer data suggest a correlation between high surface temperatures and a positive thermal gradient with active dust devils in Gusev and that Spirit landed in the waning stages of a dust devil season as temperatures decreased. 533 active dust devils were observed, enabling new characterizations; they ranged in diameter from 2 to 276 m, with most in the range of 10-20 m in diameter, and occurred from about 0930 to 1630 hours local true solar time (with the maximum forming around 1300 hours) and a peak occurrence in southern late spring (Ls ??? 250??). Horizontal speeds of the dust devils ranged from <1 to 21 m/s, while vertical wind speeds within the dust devils ranged from 0.2 to 8.8 m/s. These data, when combined with estimates of the dust content within the dust devils, yield dust fluxes of 3.95 ?? 10-9 to 4.59-4 kg/m2/s. Analysis of the dust devil frequency distribution over the inferred dust devil zone within Gusev crater yields ???50 active dust devils/km2/sol, suggesting a dust loading into the atmosphere of ???19 kg/km2/sol. This value is less than one tenth the estimates by Cantor et al. (2001) for regional dust storms on Mars. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS1993

Summary of the mineral- and energy-resource endowment, BLM roswell resource area, east-central New Mexico

In this summary of two comprehensive resource reports produced by the U.S. Bureau of Mines and the U.S. Geological Survey for the U.S. Bureau of Land Management, we discuss the mineral- and energyresource endowment of the 14-millon-acre Roswell Resource Area, New Mexico, managed by the Bureau of Land Management. The Bureau and Survey reports result from separate studies that are compilations of published and unpublished data and integrate new findings on the geology, geochemistry, geophysics, mineral, industrial, and energy commodities, and resources for the seven-county area. The reports have been used by the Bureau of Land Management in preparation of the Roswell Resource Area Resource Management Plan, and will have future use in nationwide mineral- and energy-resource inventories and assessments, as reference and training documents, and as public-information tools. In the Roswell Resource Area, many metals, industrial mineral commodities, and energy resources are being, or have been, produced or prospected. These include metals and high-technology materials, such as copper, gold, silver, thorium, uranium and/or vanadium, rare-earth element minerals, iron, manganese, tungsten, lead, zinc, and molybdenum; industrial mineral resources, including barite, limestone/dolomite, caliche, clay, fluorspar, gypsum, scoria, aggregate, and sand and gravel; and fuels and associated resources, such as oil, gas, tar sand and heavy oil, coal, and gases associated with hydrocarbons. Other commodities that have yet to be identified in economic concentrations include potash, halite, polyhalite, anhydrite, sulfur, feldspar, building stone and decorative rock, brines, various gases associated with oil and gas exploration, and carbon dioxide. ?? 1993 Oxford University Press.

Nonrenewable Resources↗
USGS1995

Optimization techniques for integrating spatial data

Two optimization techniques ta predict a spatial variable from any number of related spatial variables are presented. The applicability of the two different methods for petroleum-resource assessment is tested in a mature oil province of the Midcontinent (USA). The information on petroleum productivity, usually not directly accessible, is related indirectly to geological, geophysical, petrographical, and other observable data. This paper presents two approaches based on construction of a multivariate spatial model from the available data to determine a relationship for prediction. In the first approach, the variables are combined into a spatial model by an algebraic map-comparison/integration technique. Optimal weights for the map comparison function are determined by the Nelder-Mead downhill simplex algorithm in multidimensions. Geologic knowledge is necessary to provide a first guess of weights to start the automatization, because the solution is not unique. In the second approach, active set optimization for linear prediction of the target under positivity constraints is applied. Here, the procedure seems to select one variable from each data type (structure, isopachous, and petrophysical) eliminating data redundancy. Automating the determination of optimum combinations of different variables by applying optimization techniques is a valuable extension of the algebraic map-comparison/integration approach to analyzing spatial data. Because of the capability of handling multivariate data sets and partial retention of geographical information, the approaches can be useful in mineral-resource exploration. ?? 1995 International Association for Mathematical Geology.

Mathematical Geology↗
USGS2009

Hydrologic support of carbon dioxide flux revealed by whole-lake carbon budgets

Freshwater lakes are an important component of the global carbon cycle through both organic carbon (OC) sequestration and carbon dioxide (CO 2 ) emission. Most lakes have a net annual loss of CO 2 to the atmosphere and substantial current evidence suggests that biologic mineralization of allochthonous OC maintains this flux. Because net CO 2 flux to the atmosphere implies net mineralization of OC within the lake ecosystem, it is also commonly assumed that net annual CO 2 emission indicates negative net ecosystem production (NEP). We explored the relationship between atmospheric CO 2 emission and NEP in two lakes known to have contrasting hydrologie characteristics and net CO 2 emission. We calculated NEP for calendar year 2004 using whole-lake OC and inorganic carbon (IC) budgets, NEP oc and NEP IC , respectively, and compared the resulting values to measured annual CO 2 flux from the lakes. In both lakes, NEP Ic and NEP Ic were positive, indicating net autotrophy. Therefore CO 2 emission from these lakes was apparently not supported by mineralization of allochthonous organic material. In both lakes, hydrologie CO 2 inputs, as well as CO 2 evolved from netcalcite precipitation, could account for the net CO 2 emission. NEP calculated from diel CO 2 measurements was also affected by hydrologie inputs of CO 2 . These results indicate that CO 2 emission and positive NEP may coincide in lakes, especially in carbonate terrain, and that all potential geologic, biogeochemical, and hydrologie sources of CO 2 need to be accounted for when using CO 2 concentrations to infer lake NEP. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research G: Biogeosciences↗
USGS2014

Report of committee on glaciers, 1940–41

The personnel of the Committee is now as follows: Harry Fielding Reid, Professor Emeritus of Geology, Johns Hopkins University, 608 Cathedral Street, Baltimore, Maryland; William H. Hobbs, Professor Emeritus of Geology, University of Michigan, Ann Arbor, Michigan; Lawrence Martin, Chief of the Division of Maps, Library of Congress, Washington, D.C.; J. E. Church, Professor of Meteorology, Agricultural Experiment Station, University of Nevada, Reno, Nevada; Wm. Osgood Field, Jr., Explorer, 18 West Twelfth Street, New York, New York; Oliver Kehrlein, Chairman, Committee on Glacier Studies of Sierra Club, 1050 Mills Tower, 220 Bush Street, San Francisco, California; Kenneth N. Phillips, Associate Hydraulic Engineer, Water Resources Branch, United States Geological Survey, Chairman, Research Committee of the Mazamas, 606 Post‐Office Building, Portland, Oregon; William S. Cooper, Professor of Botany, University of Minnesota, Minneapolis, Minnesota; Gerald Fitzgerald, Senior Topographic Engineer, Alaska Branch, United States Geological Survey, Washington, D.C.; Laurence M. Gould, Professor of Geology, Carleton College, Northfield, Minnesota; Dr. Max Demorest, Department of Geology, Yale University, New Haven, Connecticut; François E. Matthes (Chairman), Senior Geologist, Section of Glacial Geology, United States Geological Survey, Washington, D.C.

Eos, Transactions, American Geophysical Union↗
USGS1981

Seismic amplitude anomalies associated with thick First Leo sandstone lenses, eastern Powder River basin, Wyoming

Several new discoveries of oil production in the Leo sandstone, an economic unit in the Pennsylvanian middle member of the Minnelusa formation, eastern Powder River basin, Wyoming-Nebraska-South Dakota, have renewed exploration interest in this area. Vertical seismic profiles (VSP) and model studies suggested that a measurable seismic amplitude anomaly is frequently associated with the thick First Leo sandstone lenses. To test this concept, a surface reflection seismic profile was run between two wells about 12 miles apart. The First Leo was present and productive in one well and thin and barren in the other. The surface profile shows the predicted amplitude anomaly at the well where a thick lens is known to exist. Two other First Leo amplitude anomalies also appear on the surface seismic profile between the two wells, which may indicate the presence of additional lenses.

Geophysics↗