Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “JGR Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

641 records · Page 23Linked to original sources
USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗
USGS2024

Estimation of reservoir storage capacity and geomorphic change detection analysis from a multibeam bathymetric survey of Randy Poynter Lake, Rockdale County, Georgia

Rockdale County Department of Water Resources has a directive to update estimates of the reservoir storage capacity of Randy Poynter Lake, located in northern Georgia, and to assess recent sedimentation and associated storage capacity loss. In 2022, the U.S. Geological Survey completed a multibeam bathymetric survey of Randy Poynter Lake to update storage capacity estimates and to quantify storage capacity change since the first multibeam bathymetric survey in 2012 in consideration of estimated errors inherent to bathymetric surveys. Data from the 2022 survey were used to generate contours of the reservoir as well as compute storage capacity at regular increments of water-surface elevation. Storage capacity comparisons between 2012 and 2022 at Randy Poynter Lake show minimal changes that are within the estimated uncertainties, with consistent or slightly increased storage capacities observed at most water-surface elevations and reductions observed at the remaining few elevations. Comparison of the multibeam bathymetric data collected in 2012 with data collected in 2022 further allowed for a formal geomorphic change detection analysis to map, quantify, and infer causation of morphological change over time with respect to a level of detectable change. The volume change in Randy Poynter Lake for the decade between 2012 and 2022 was slightly net-depositional and within the estimated uncertainty. The spatial distribution of sediment deposition was primarily concentrated in the northern portion of the lake, where the principal tributary flows into Randy Poynter Lake. The results of the geomorphic change analysis were used to further understand the future implications to storage capacity change. Despite the challenges of confirming systematic biases because of uncertainties exceeding the observed changes, insights from the study help predict long-term reservoir sediment accumulation, indicating a reservoir half-life extending about 650 years from 2022 on the basis of the current sediment yield estimates.

Georgia↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2025

Summary of selenium in the lower Gunnison River Basin, Colorado—Information and data gaps

The Cretaceous Mancos Shale is a geologic source of selenium in the lower Gunnison River Basin. Natural weathering processes and human activity mobilize selenium from the Mancos Shale and derived materials, and surface water, groundwater, and sediment all affect the transport of selenium from source areas to receiving streams and biota. Selenium accumulates through the aquatic food chain, and its toxic effects can result in invertebrate mortality and mortality, decreased reproduction, and deformities to fish and birds. The Bureau of Reclamation, in cooperation with the State of Colorado and Gunnison River Basin water users, is implementing a Selenium Management Program to reduce selenium concentrations in the lower Gunnison River Basin of Colorado. Goals of the Selenium Management Program are to (1) achieve compliance with the State of Colorado chronic aquatic-life standard for dissolved selenium (4.6 micrograms per liter) in the Gunnison River near Grand Junction, Colorado; (2) sufficiently improve water-quality conditions to assist in the recovery of endangered species in the Gunnison and Colorado Rivers by reducing selenium concentrations; and (3) support continued water uses in the basin. Many previous studies have contributed to the understanding of selenium in the environment; however, monitoring and research data gaps exist in the lower Gunnison River Basin. The purpose of this report is to summarize information regarding selenium in the lower Gunnison River Basin and describe strategies for scientific research and monitoring to potentially improve understanding of selenium sources; processes affecting the mobilization, transport, and fate of selenium; and the effects of selenium-mitigation projects in the lower Gunnison River Basin. Monitoring and research data gaps discussed in this report include geologic mapping and geochemical source characterization, long-term and ongoing monitoring of the surface-water and groundwater networks, developing and refining statistical models, characterizing selenium on suspended sediment, modeling selenium in the food web, evaluating best management practices, and more.

Colorado↗
USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2026

Evaluating groundwater quality influences from oil field operations and other anthropogenic activities in an urban setting, Santa Fe Springs, California

Groundwater quality is often affected by anthropogenic activities in urban settings. This study examines groundwater quality in and around the Santa Fe Springs Oil Field in Los Angeles County, California, where oil and gas production commonly intersects with high density industrial, commercial and residential land uses. Utilizing a combination of new and historical data, we evaluated potential pathways that would allow for oil field formation fluids to migrate into groundwater and whether mixing may have occurred based on the distribution of groundwater and oil field formation fluid tracers in samples. Samples were analyzed for a wide array of constituents including volatile organic compounds, light hydrocarbons, major ions, and various isotopic compositions. Despite evidence of oil field infrastructure providing potential pathways of migration via uncemented annular spaces, casing breaches and historical disposal of oil field formation water in surface ponds, the distribution and occurrence of stable isotopes of water, chloride, boron, and total dissolved solids do not indicate mixing of oil field formation water and groundwater. However, methane isotopic signatures and the presence of heavier alkanes suggest gas from oil-bearing formations have migrated from depth via oil field well infrastructure. Volatile organic compound detections were mainly from manufactured compounds unrelated to oil and gas production, with a relatively limited number of petroleum hydrocarbons also detected. Volatile organic compounds were generally found in wells tapping shallow, modern aged groundwater, indicating anthropogenic activities occurring at or near land surface as the source. Study results suggest that while oil field infrastructure provides migration pathways for oil field formation fluids to be introduced into groundwater, urban land uses not related to oil and gas production are the primary drivers of groundwater quality degradation.

California↗
USGS2026

Restoring dryland water cycles for precipitation feedback and climate stability; a review

Drylands across the globe are experiencing intensifying water scarcity, land degradation, and hydroclimatic extremes. This review integrates evidence from multidecadal field studies, hydrologic monitoring, geomorphic and ecological assessments, remote sensing, and land–atmosphere science to evaluate how restoration influences key components of the terrestrial water cycle. Low-tech natural infrastructure in dryland streams (NIDS)—including check dams, leaky weirs, one-rock dams, and gabions—has emerged as a promising but under-synthesized nature-based solution for restoring hydrologic function in these environments. We describe the mechanisms through which these interventions modify runoff detention, infiltration, sediment and alluvial storage, shallow-groundwater recharge, vegetation recovery, and surface-energy partitioning, and we summarize outcomes across diverse dryland settings. Findings consistently show increased water residence time, enhanced soil-moisture storage, expanded riparian vegetation, extended flow duration, and shifts toward greater latent-heat flux—producing localized cooling and strengthened ecohydrological feedbacks. Building on these localized effects, we articulate a hypothesis that links the spatial extent of restoration, the density of NIDS per unit drainage area, and the magnitude of the latent-to-sensible-heat contrast generated by wetter post-rainfall conditions. Specifically, we hypothesize that when NIDS are implemented at densities permitted by topography and across areas large enough to maintain elevated soil moisture after storm events, the resulting increases in latent heat flux, surface cooling, and boundary-layer moistening may enhance moisture convergence and boundary-layer development, potentially increasing the likelihood or stability of convective precipitation, analogous to how reductions in these processes have contributed to regional drought intensification. These land–atmosphere feedbacks remain untested at scale but represent an important research Frontier. By integrating hydrologic, geomorphic, ecological, and atmospheric perspectives, this review provides a comprehensive framework for considering how low-tech, landscape-scale interventions can strengthen watershed resilience and contribute to climate-relevant nature-based solutions.

Arizona↗
USGS2024

2024 Crustal Deformation Modeling Workshop report

The 2024 Crustal Deformation Modeling Workshop was held June 10–14 at the Colorado School of Mines. The workshop included two days of tutorials on using PyLith for crustal deformation modeling, followed by three days of science talks and discussions. The workshop focused on four primary themes: ● Constraining long-term fault slip rates and their uncertainties using geodetic and geologic data; ● Earthquake cycle modeling with a focus on constraining models using seismic and geodetic data; ● Interaction of fluids and faulting; and ● Separating contributions of surface loading and tectonic loading in crustal deformation. The complete agenda is available on the CIG website.

Conference Paper↗
USGS2025

U.S. Geological Survey National Groundwater Climate Response Network

What is the U.S. Geological Survey National Groundwater Climate Response Network? The U.S. Geological Survey’s (USGS) National Water Monitoring Network is a network of networks that includes the Climate Response Network (CRN). The CRN is a network of wells selected to monitor the effects of climate variability, including droughts, on groundwater systems within the United States, Puerto Rico, and the U.S. Virgin Islands. The primary purpose of the CRN is to monitor these effects on groundwater levels in unconfined or near-surface confined aquifers that are minimally affected by pumping or other human-induced stresses.

Fact Sheet↗
USGS2024

The U.S. Geological Survey Ohio Water Microbiology Laboratory

The U.S. Geological Survey Ohio Water Microbiology Laboratory is a part of the Ohio-Kentucky-Indiana Water Science Center. The mission of the laboratory is to provide microbiological data of public health significance from surface waters, groundwaters, and sediments for a variety of study objectives. The laboratory conducts internal projects, works with external cooperators, and assists U.S. Geological Survey offices and National programs. The laboratory offers guidance, study design, and data interpretation expertise to collaborators, all following rigorous quality control and quality assurance procedures.

Fact Sheet↗
USGS2024

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California↗
USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗
USGS2025

Estimating agricultural irrigation water consumption for the High Plains aquifer region with integrated energy- and water-balance evapotranspiration modeling approaches

Estimation of irrigation water use provides essential information for the management and conservation of agricultural water resources. Conventionally, water use data are created based on reports and surveys from water users, whereas manual records may not be complete due to lacking flow meters, measurement gaps, inconsistent methods across regions, and time- and cost-consuming data processing. Alternatively, spatially explicit estimation of irrigation water use can be conducted efficiently using remote sensing evapotranspiration (ET) modeling approaches. In this study, we created a gridded blue water evapotranspiration (BWET) dataset to estimate historical irrigation water consumption (1986 – 2020) in the croplands across the United States High Plains aquifer region. The BWET data were generated by integrating an energy-balance ET model [Operational Simplified Surface Energy Balance model (SSEBop)] and a water-balance ET model [Vegetation ET model (VegET)]. BWET in croplands indicates crop consumptive use of irrigation water extracted from surface water and groundwater resources. The BWET estimates were compared with reported irrigation water use data for all counties within the aquifer region. The results revealed high agreement between growing season (May – September) BWET and annual water withdrawal at county level. Specifically, correlation coefficients of volumetric BWET and water withdrawal were 0.90 and 0.96, respectively, for the entire aquifer region and western Kansas. The timeseries of BWET and water withdrawal showed similar temporal trends and high covariations. The BWET estimates were systematically lower than the water withdrawal measurements, which was primarily attributed to blue water losses in the irrigation system. The irrigation efficiency, calculated as the ratio of BWET to water withdrawal depth, was 0.57 and 0.74 for the entire aquifer region and western Kansas, respectively. This study demonstrates the capability of using satellite-based ET models (e.g., SSEBop and VegET) to efficiently estimate crop water consumption and evaluate irrigation efficiency at landscape, county, and regional scales.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗
USGS2026

Hydrogeologic conceptualization of the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory, Edwards Air Force Base, Antelope Valley, California, 2017–21

Research and testing within the Air Force Research Laboratory at Edwards Air Force Base in the southwestern Mojave Desert has been conducted since the 1950s. This testing requires large quantities of groundwater for cooling and operations involving hazardous constituents that have entered the groundwater. To better understand the potential movement of contaminants through the groundwater system, the U.S. Geological Survey entered into a cooperative agreement with the U.S. Air Force Civil Engineer Center with the purpose of (1) gaining a more detailed understanding of the hydraulic connection between the unconsolidated basin-fill sediment and the underlying weathered and crystalline bedrock and (2) investigating faults and their potential effect on groundwater flow. This study was specific to the Arroyos subarea and Northeast Air Force Research Laboratory subarea of the Air Force Research Laboratory. The refined hydrogeologic characterization was derived by evaluating surface geologic maps, a regional gravity model, new subsurface geophysical surveys, lithology data from boreholes, and groundwater-level data. Refinement of the hydrogeologic characterization of the study area involved developing a map of basin-fill sediment thickness, estimating the geometry and depth to bedrock, determining the presence of weathered bedrock material, and identifying the location of faults and subsurface structures. The thickness of basin-fill sediment was derived from a regional gravity model. Basin-fill sediment ranges from less than 20 feet (ft) thick to about 150 ft thick and increases substantially toward a deep structural basin in the northwestern part of the study area. The top of bedrock estimated from the new surface geophysical surveys is generally deeper than the top of bedrock from the regional gravity model. These differences in interpreted bedrock tops indicate that there may be a zone of weathered bedrock in the subsurface, overlying crystalline bedrock. Additional subsurface data evaluating the geometry and thickness of weathered bedrock are necessary for a comprehensive evaluation of weathered bedrock in the study area. Previously unmapped extensions of the Leuhman Fault, Spring Fault Zone, and Boron Gate Fault were identified in the new surface geophysical surveys. Evaluation of groundwater flow between bedrock and basin-fill sediment, and the effects of faults on groundwater flow, was done using groundwater-level data from 2020. The groundwater table was in crystalline bedrock throughout most of the Arroyos and Northeast Air Force Research Laboratory subareas, with a few exceptions where it was in basin-fill sediment and weathered bedrock. Basin-fill sediment, and likely weathered bedrock, was partially saturated in parts of the study area where basin-fill sediment was as thick as 150 ft. Weathered bedrock material may be present near the Spring Fault Zone, and if so, was likely saturated in 2020. The groundwater-level data near and within Spring Fault Zone indicate that the Spring Fault Zone acts as a vertical-along-strike conduit for, and as an across-strike impediment to, groundwater flow. In addition, steep groundwater-level gradients in the southeastern part of the study area indicate that a subsurface structure affecting groundwater flow could be related to the Leuhman Fault. Sufficient groundwater-level data were not available to conclusively determine if the Arroyos, Rich, and Boron Gate Faults, and their inferred extensions from the geophysical surveys, affect the movement or direction of groundwater flow.

California↗
USGS2024

The 3D National Topography Model Call for Action—Part 1. The 3D Hydrography Program

The U.S. Geological Survey is initiating the 3D Hydrography Program (3DHP), the first systematic remapping of the Nation’s surface waters since the original 1:24,000-scale topographic mapping program was active from 1947 to 1992. Building on decades of experience maintaining the National Hydrography Dataset (NHD), the Watershed Boundary Dataset (WBD), and the NHDPlus High Resolution (NHDPlus HR), the 3DHP will completely refresh the Nation’s hydrography data and improve discovery and sharing of water-related data. The design of the 3DHP is based on the results of a study that estimated that the fully implemented program would have the potential to provide more than $1 billion in benefits to Federal, State, Tribal, Territorial, and local governments and to private and nonprofit organizations every year, in addition to myriad societal benefits. The 3DHP would directly support better decision making regarding water resources by providing more accurate, complete, and integrated information than is currently available. The 3DHP datasets will include a three-dimensional (3D) hydrography network generated from and integrated with elevation data from the 3D Elevation Program (3DEP) to better represent stream gradients and channel conditions, along with waterbodies, hydrologic units, hydrologically enhanced elevation and other surfaces, and more consistent and accurate attributes. The 3DHP datasets will inherit key attributes of the NHD, WBD, and NHDPlus HR, and they also will include new attributes and links to other data such as the U.S. Fish and Wildlife Service National Wetlands Inventory, groundwater data, and engineered hydrologic systems such as stormwater networks. The 3DHP will be designed to provide a set of open and interoperable web-based tools, maps, and data catalogs, creating a robust system for users to reference their information about water; the system elements are collectively referred to as the “infostructure.” The 3DHP and the infostructure can provide a foundational geospatial underpinning for the Internet of Water, a community-based effort to modernize tools and technologies to share water data. As proposed, the 3DHP would begin providing products and services to the public in 2024.

Circular↗
USGS2025

Groundwater-level elevations in the Denver Basin bedrock aquifers and Upper Black Squirrel Creek alluvial aquifer, El Paso County, Colorado, 2021–24

El Paso County is the second-most populous county in Colorado and is projected to grow another 15 percent by 2030. Within El Paso County is the Upper Black Squirrel Creek Designated Groundwater Basin (Black Squirrel Basin), an area where surface water is scarce and water users rely primarily on groundwater from five different aquifers (the Upper Black Squirrel Creek alluvial aquifer and four bedrock aquifers within the Denver Basin aquifer system: the lower Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers) to meet their needs. Currently (2024), land within the Upper Black Squirrel Creek Basin is primarily used for rural grazing and agriculture; however, municipal development is ongoing. In 2021, the U.S. Geological Survey, in cooperation with the Upper Black Squirrel Creek Ground Water Management District, began a study to establish a baseline dataset and assess the groundwater resources of the aquifers within the Black Squirrel Basin. A network of 39 wells was established in 2021; discrete groundwater-level measurements were made bimonthly. Nine of the 39 wells were equipped with pressure transducers to record hourly groundwater-level data. Seven wells had statistically significant seasonal trends, and trends at 3 wells were negative. For the discrete data, 16 wells had a significant trend for the study period, and 4 wells had negative trends. For the time-series data, 8 wells had significant trends, and 3 wells had negative trends. Potentiometric surface maps were created for this study using discrete, static groundwater levels measured in April 2023. These maps showed the estimated groundwater flow direction from the north-northwest to the south-southeast in the alluvial aquifer and from the northwest to the east-southeast for the lower Dawson and Denver aquifer wells. This study indicates the potential benefit of monitoring wells in the areas near municipal pumping. Additional monitoring could lead to a better understanding of connectivity between aquifers and be an important tool for assessing long-term sustainability of groundwater use.

Colorado↗