Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23Linked to original sources
USGS2007

Crustal structure of Wrangellia and adjacent terranes inferred from geophysical studies along a transect through the northern Talkeetna Mountains

Recent investigations of the Talkeetna Mountains in south-central Alaska were undertaken to study the region's framework geophysics and to reinterpret structures and crustal composition. Potential field (gravity and magnetic) and magnetotelluric (MT) data were collected along northwest-trending profiles as part of the U.S. Geological Survey's Talkeetna Mountains transect project. The Talkeetna Mountains transect area comprises eight 1:63,360 quadrangles (∼9500 km 2 ) in the Healy and Talkeetna Mountains 1° × 3° sheets that span four major lithostratigraphic terranes ( Glen et al., this volume ) including the Wrangellia and Peninsular terranes and two Mesozoic overlap assemblages inboard (northwest) of Wrangellia. These data were used here to develop 2½-dimensional models for the three profiles.

Special Paper of the Geological Society of America↗
USGS2007

Characterizing infiltration through a mine-waste dump using electrical geophysical and tracer-injection methods, Clear Creek County, Colorado

Infiltration of surface water through mine waste can be an important or even dominant source of contaminants in a watershed. The Waldorf mine site in Clear Creek County, Colorado, is typical of tens of thousands of small mines and prospects on public lands throughout the United States. In this study, electromagnetic (EM) conductivity and direct current (dc) resistivity surveys were conducted in tandem with a NaCl tracer study to delineate ground-water flow paths through a mine-waste dump and adjacent wetland area. The tracer was used to tag adit water infiltrating from braided channels flowing over the top of the dump to seeps at the base of the dump. Infiltration from the braided channels had a maximum flow rate of 92 m/day and a hydraulic conductivity of 1.6 × 10 4 cm 3 /s. After rerouting of adit flow around the waste dump, discharge at some of the largest seeps was reduced, although not all seepage was eliminated entirely. Integrating results of the tracer study with those of the EM and dc geophysical surveys revealed two main flow paths of ground water, one beneath the dump and one through the dump. The main source of water to the first flow path is deeper ground water emerging from the fault zone beneath the collapsed adit. This flow path travels beneath the waste dump and appears to have been unaffected by rerouting of the adit discharge around the waste dump. The source of the second flow path is infiltration of adit water from braided channels flowing over the top of the dump, which is intermediate in depth and flows through the center of the waste dump. Following rerouting of adit flow, discharge to seeps at the toe of the dump along this flow path was reduced by as much as two-thirds, although not eliminated entirely. Improved understanding of ground-water flow paths through this abandoned mine site is important in developing effective remediation strategies to target sources of metals emanating from the adit, waste dump, and contaminated wetland area. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. government.

Colorado↗
USGS2014

Geophysical framework of the Peninsular Ranges batholith—Implications for tectonic evolution and neotectonics

The crustal structure of the Peninsular Ranges batholith can be divided geophysically into two parts: (1) a western mafic part that is dense, magnetic, and characterized by relatively high seismic velocities (>6.25 km/s), low heat flow (<60 mW/m 2 ), and relatively sparse seismicity, and (2) an eastern, more felsic part that is less dense, weakly magnetic, and characterized by lower seismic velocities (<6.25 km/s), high heat flow (>60 mW/m 2 ), and abundant microseismicity. Potential-field modeling indicates that the dense, mafic part of the batholith extends to depths of at least 20 km and likely to the Moho. The magnetic anomalies of the western part of the batholith extend south beyond the spatially extensive exposures of the batholith to the tip of the Baja California peninsula, which suggests that the mafic part of the batholith projects beneath Cenozoic volcanic cover another 400 km. The linearity and undisrupted nature of the magnetic belt of anomalies suggest that the western part of the batholith has behaved as a rigid block since emplacement of the batholith. The batholith may have influenced not only the development of the Gulf of California oblique rift, but also strike-slip faulting along its northern margin, and transtensional faulting along its western margin, likely because it is thermally and mechanically more resistant to deformation than the surrounding crust.

California↗
USGS2004

Geophysical and isotopic mapping of preexisting crustal structures that influenced the location and development of the San Jacinto fault zone, southern California

We examine the role of preexisting crustal structure within the Peninsular Ranges batholith on determining the location of the San Jacinto fault zone by analysis of geophysical anomalies and initial strontium ratio data. A 1000-km-long boundary within the Peninsular Ranges batholith, separating relatively mafic, dense, and magnetic rocks of the western Peninsular Ranges batholith from the more felsic, less dense, and weakly magnetic rocks of the eastern Peninsular Ranges batholith, strikes north-northwest toward the San Jacinto fault zone. Modeling of the gravity and magnetic field anomalies caused by this boundary indicates that it extends to depths of at least 20 km. The anomalies do not cross the San Jacinto fault zone, but instead trend northwesterly and coincide with the fault zone. A 75-km-long gradient in initial strontium ratios (Sri) in the eastern Peninsular Ranges batholith coincides with the San Jacinto fault zone. Here rocks east of the fault are characterized by Sri greater than 0.706, indicating a source of largely continental crust, sedimentary materials, or different lithosphere. We argue that the physical property contrast produced by the Peninsular Ranges batholith boundary provided a mechanically favorable path for the San Jacinto fault zone, bypassing the San Gorgonio structural knot as slip was transferred from the San Andreas fault 1.0-1.5 Ma. Two historical M6.7 earthquakes may have nucleated along the Peninsular Ranges batholith discontinuity in San Jacinto Valley, suggesting that Peninsular Ranges batholith crustal structure may continue to affect how strain is accommodated along the San Jacinto fault zone. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗
USGS2005

Geophysical evidence for wedging in the San Gorgonio Pass structural knot, southern San Andreas fault zone, southern California

Geophysical data and surface geology define intertonguing thrust wedges that form the upper crust in the San Gorgonio Pass region. This picture serves as the basis for inferring past fault movements within the San Andreas system, which are fundamental to understanding the tectonic evolution of the San Gorgonio Pass region. Interpretation of gravity data indicates that sedimentary rocks have been thrust at least 5 km in the central part of San Gorgonio Pass beneath basement rocks of the southeast San Bernardino Mountains. Subtle, long-wavelength magnetic anomalies indicate that a magnetic body extends in the subsurface north of San Gorgonio Pass and south under Peninsular Ranges basement, and has a southern edge that is roughly parallel to, but 5-6 km south of, the surface trace of the Banning fault. This deep magnetic body is composed either of upper-plate rocks of San Gabriel Mountains basement or rocks of San Bernardino Mountains basement or both. We suggest that transpression across the San Gorgonio Pass region drove a wedge of Peninsular Ranges basement and its overlying sedimentary cover northward into the San Bernardino Mountains during the Neogene, offsetting the Banning fault at shallow depth. Average rates of convergence implied by this offset are broadly consistent with estimates of convergence from other geologic and geodetic data. Seismicity suggests a deeper detachment surface beneath the deep magnetic body. This interpretation suggests that the fault mapped at the surface evolved not only in map but also in cross-sectional view. Given the multilayered nature of deformation, it is unlikely that the San Andreas fault will rupture cleanly through the complex structures in San Gorgonio Pass. ?? 2005 Geological Society of America.

Geological Society of America Bulletin↗
USGS2004

Geophysical investigation of the Denali fault and Alaska Range orogen within the aftershock zone of the October–November 2002, M = 7.9 Denali fault earthquake

The aftershock zone of the 3 November 2002, M = 7.9 earthquake that ruptured along the right-slip Denali fault in south-central Alaska has been investigated by using gravity and magnetic, magnetotelluric, and deep-crustal, seismic reflection data as well as outcrop geology and earthquake seismology. Strong seismic reflections from within the Alaska Range orogen north of the Denali fault dip as steeply as 25°N and extend to depths as great as 20 km. These reflections outline a relict crustal architecture that in the past 20 yr has produced little seismicity. The Denali fault is nonreflective, probably because this fault dips steeply to vertical. The most intriguing finding from geophysical data is that earthquake aftershocks occurred above a rock body, with low electrical resistivity (>10 Ω·m), that is at depths below ∼10 km. Aftershocks of the Denali fault earthquake have mainly occurred shallower than 10 km. A high geothermal gradient may cause the shallow seismicity. Another possibility is that the low resistivity results from fluids, which could have played a role in locating the aftershock zone by reducing rock friction within the middle and lower crust.

Alaska↗
USGS2007

Crustal controls on magmatic-hydrothermal systems: A geophysical comparison of White River, Washington, with Goldfield, Nevada

The White River altered area, Washington, and the Goldfield mining district, Nevada, are nearly contemporaneous Tertiary (ca. 20 Ma) calc-alkaline igneous centers with large exposures of shallow (<1 km depth) magmatic-hydrothermal, acid-sulfate alteration. Goldfield is the largest known high-sulfidation gold deposit in North America. At White River, silica is the only commodity exploited to date, but, based on its similarities with Goldfield, White River may have potential for concealed precious and/or base metal deposits at shallow depth. Both areas are products of the ancestral Cascade arc. Goldfield lies within the Great Basin physiographic province in an area of middle Miocene and younger Basin and Range and Walker Lane faulting, whereas White River is largely unaffected by young faults. However, west-northwest–striking magnetic anomalies at White River do correspond with mapped faults synchronous with magmatism, and other linear anomalies may reflect contemporaneous concealed faults. The White River altered area lies immediately south of the west-northwest–striking White River fault zone and north of a postulated fault with similar orientation. Structural data from the White River altered area indicate that alteration developed synchronously with an anomalous stress field conducive to left-lateral, strike-slip displacement on west-northwest–striking faults. Thus, the White River alteration may have developed in a transient transtensional region between the two strike-slip faults, analogous to models proposed for Goldfield and other mineral deposits in transverse deformational zones. Gravity and magnetic anomalies provide evidence for a pluton beneath the White River altered area that may have provided heat and fluids to overlying volcanic rocks. East– to east-northeast–striking extensional faults and/or fracture zones in the step-over region, also expressed in magnetic anomalies, may have tapped this intrusion and provided vertical and lateral transport of fluids to now silicified areas. By analogy to Goldfield, geophysical anomalies at the White River altered area may serve as proxies for geologic mapping in identifying faults, fractures, and intrusions relevant to hydrothermal alteration and ore formation in areas of poor exposure.

Nevada, Washington↗
USGS2016

Late Oligocene to present contractional structure in and around the Susitna basin, Alaska—Geophysical evidence and geological implications

The Cenozoic Susitna basin lies within an enigmatic lowland surrounded by the Central Alaska Range, Western Alaska Range (including the Tordrillo Mountains), and Talkeetna Mountains in south-central Alaska. Some previous interpretations show normal faults as the defining structures of the basin (e.g., Kirschner, 1994). However, analysis of new and existing geophysical data shows predominantly (Late Oligocene to present) thrust and reverse fault geometries in the region, as previously proposed by Hackett (1978). A key example is the Beluga Mountain fault where a 50-mGal gravity gradient, caused by the density transition from the igneous bedrock of Beluga Mountain to the >4-km-thick Cenozoic sedimentary section of Susitna basin, spans a horizontal distance of ∼40 km and straddles the topographic front. The location and shape of the gravity gradient preclude a normal fault geometry; instead, it is best explained by a southwest-dipping thrust fault, with its leading edge located several kilometers to the northeast of the mountain front, concealed beneath the shallow glacial and fluvial cover deposits. Similar contractional fault relationships are observed for other basin-bounding and regional faults as well. Contractional structures are consistent with a regional shortening strain field inferred from differential offsets on the Denali and Castle Mountain right-lateral strike-slip fault systems.

Alaska↗
USGS2020

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland

Catalina Basin, located within the southern California Inner Continental Borderland (ICB), is traversed by two active submerged fault systems that are part of the broader North America-Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the approximately 8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ~3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

California↗
USGS2022

Revisiting the 1899 earthquake series using integrative geophysical analysis in Yakutat Bay, Alaska

A series of large earthquakes in 1899 affected southeastern Alaska near Yakutat and Disenchantment Bays. The largest of the series, a M W 8.2 event on 10 September 1899, generated an ~12-m-high tsunami and as much as 14.4 m of coseismic uplift in Yakutat Bay, the largest coseismic uplift ever measured. Several complex fault systems in the area are associated with the Yakutat terrane collision with North America and the termination of the Fairweather strike-slip system, but because faults local to Yakutat Bay have been incompletely or poorly mapped, it is unclear which fault system(s) ruptured during the 10 September 1899 event. Using marine geophysical data collected in August 2012, we provide an improved tectonic framework for the Yakutat area, which advances our understanding of earthquake hazards. We combined 153 line km of 2012 high-resolution multichannel seismic (MCS) reflection data with compressed high-intensity radar pulse (Chirp) profiles, basin-scale MCS data, 2018 seafloor bathymetry, published geodetic models and thermochronology data, and previous measurements of coseismic uplift to better constrain fault geometry and subsurface structure in the Yakutat Bay area. We did not observe any active or concealed faults crossing Yakutat Bay in our high-resolution data, requiring faults to be located entirely onshore or nearshore. We interpreted onshore faults east of Yakutat Bay to be associated with the transpressional termination of the Fairweather fault system, forming a series of splay faults that exhibit a horsetail geometry. Thrust and reverse faults on the west side of the bay are related to Yakutat terrane underthrusting and collision with North America. Our results include an updated fault map, structural model of Yakutat Bay, and quantitative assessment of uncertainties for legacy geologic coseismic uplift measurements. Additionally, our results indicate the 10 September 1899 rupture was possibly related to stress loading from the earlier Yakutat terrane underthrusting event of 4 September 1899, with the majority of 10 September coseismic slip occurring on the Esker Creek system on the northwest side of Yakutat Bay. Limited (~2 m) coseismic or postseismic slip associated with the 1899 events occurred on faults located east of Yakutat Bay.

Alaska↗
USGS2024

Deep resistivity geophysics of the San Juan–Silverton caldera complex, San Juan County, Colorado (USA)

Magnetotelluric (MT) and audiomagnetotelluric (AMT) data are used to better understand the subsurface geology and mineral resources in the San Juan–Silverton caldera complex located near Silverton, Colorado, western United States, as part of the extensive southern Rocky Mountains volcanic field that covers much of southwestern Colorado and northern New Mexico. Seven MT and AMT profiles of varying lengths image resistivity structure to depths of ~5 km. The AMT inversion models characterize geophysical responses of near-surface lithologies, structures, and mineralized systems and also help corroborate airborne electromagnetic data at shallow levels. The MT inversion models extend our depth of investigation from near the surface to great depths (~5 km) and help to form hypotheses about roots of the hydrothermal plumbing that fed shallower mineralized systems. Subsurface high resistivities occur beneath intermediate-composition lava flows and Proterozoic units. Subsurface moderate- to low-resistivity values may reflect hydrothermal plumbing that served as flow paths for mineralizing fluids and metallic ore formation. The model interpreta­tions presented in this study could be utilized in remediation planning or mineral resource applications. The methods used could be applied to other watersheds with similar volcanic environments containing acid-generating historical mines or hydrothermally altered and mineralized source rocks.

Colorado↗
USGS2021

Toward an integrative geological and geophysical view of Cascadia subduction zone earthquakes

The Cascadia subduction zone (CSZ) is an exceptional geologic environment for recording evidence of land level changes, tsunamis, and ground motion that reveals at least 19 great megathrust earthquakes over the past 10 kyr. Such earthquakes are among the most impactful natural hazards on Earth, transcend national boundaries, and can have global impact. Reducing the societal impacts of future events in the U.S. Pacific Northwest and coastal British Columbia, Canada requires improved scientific understanding of megathrust earthquake rupture, recurrence, and corresponding hazards. Despite substantial knowledge gained from decades of research, large uncertainties remain about the characteristics and frequencies of past CSZ earthquakes. In this review, we summarize geological, geophysical, and instrumental evidence relevant to understanding megathrust earthquakes along the CSZ and associated uncertainties. We discuss how the evidence constrains various models of great megathrust earthquake recurrence in Cascadia and identify potential paths forward for the earthquake science community.

British Columbia, Oregon, Washington↗
USGS2011

Recovery and reprocessing of legacy geophysical data from the archives of the State Company of Geology and Mining (GEOSURV) of Iraq and Iraq Petroleum Company (IPC)

Aeromagnetic data belonging to the State Company of Geology and Mining of Iraq (GEOSURV) have been recovered from magnetic tapes and early paper maps. In 1974 a national airborne survey was flown by the French firm Compagnie General de Geophysique (CGG). Following the survey the magnetic data were stored on magnetic tapes within an air conditioned archive run by GEOSURV. In 1990, the power supply to the archive was cut resulting in the present‐day poor condition of the tapes. Frontier Processing Company and the U.S. Geological Survey (USGS) have been able to recover over 99 percent of the original digital data from the CGG tapes. Preliminary reprocessing of the data yielded a total magnetic field anomaly map that reveals fine structures not evident in available published maps. Successful restoration of these comprehensive, high quality digital datasets obviates the need to resurvey the entire country, thereby saving considerable time and money. These data were delivered to GEOSURV in a standard format for further analysis and interpretation. A parallel effort by GETECH concentrated on recovering the legacy gravity data from the original field data sheets archived by IPC (Iraq Petroleum Company). These data have been compiled with more recent GEOSURV sponsored surveys thus allowing for the first time a comprehensive digital and unified national gravity database to be constructed with full principal facts. Figure 1 shows the final aeromagnetic and gravity data coverage of Iraq. The only part of Iraq lacking gravity and aeromagnetic data coverage is the mountainous areas of the Kurdish region of northeastern Iraq. Joint interpretation of the magnetic and gravity data will help guide future geophysical investigations by GEOSURV, whose ultimate aim is to discover economical mineral and energy resources.

SEG Technical Program Expanded Abstracts↗
USGS2020

Integrated geophysical analysis provides an alternate interpretation of the northern margin of the North American Midcontinent Rift System, Central Lake Superior

The Midcontinent Rift System (MRS) is a 1.1 Ga sequence of voluminous basaltic eruptions and multiple intrusions followed by widespread sedimentation that extends across the Midcontinent and northern Great Lakes region of North America. Previous workers have commonly used seismic-reflection data (Great Lakes International Multidisciplinary Program on Crustal Evolution [GLIMPCE] line A) to demonstrate that the northern rift margin in central Lake Superior developed as a normal growth fault that was structurally inverted to a reverse fault during a compressional event after rifting had ended. A prominent, curvilinear aeromagnetic anomaly that extends from Isle Royale, Michigan, to Superior Shoal in central Lake Superior, Ontario (the IR-SS anomaly), is commonly presented as a manifestation of this reverse fault. We have integrated multidisciplinary geophysical analyses (seismic-reflection, seismic-refraction, aeromagnetic, and gravity), physical-property information (density, magnetic susceptibility and remanence, and compressional-wave velocity), and geologic concepts to develop an alternate interpretation of the rift margin along GLIMPCE line A, where it intersects the IR-SS anomaly. Our new model indicates that a normal fault is the dominant structure at the northern rift margin along line A, contrary to the original rift-margin paradigm, which asserts that compressional structures are the dominant features preserved today. Integral to this alternate model is a newly interpreted, prerift sedimentary basin intruded by sills in northern Lake Superior. Our alternate model of the northern rift margin has implications for interpreting the style, scale, and timing of extension, rift-related intrusion, and compression during development of the MRS.

Lake Superior↗
USGS2022

Mapping aquifer salinity gradients and effects of oil field produced water disposal using geophysical logs: Elk Hills, Buena Vista and Coles Levee Oil Fields, San Joaquin Valley, California

The effects of oil and gas production on adjacent groundwater quality are becoming a concern in many areas of the United States. As a result, it has become increasingly important to identify which aquifers require monitoring and protection. In this study, we map the extent of groundwater with less than 10,000 mg/L TDS both laterally and vertically near the Elk Hills, Buena Vista and Coles Levee Oil Fields in the San Joaquin Valley, California and note evidence of effects of produced water disposal on salinity within the Tulare aquifer. Subsurface maps showing the depth at which groundwater salinity is less than 10,000 mg/L (or Base 10K) in the Tulare aquifer are generated using geophysical logs and verified by comparison to water sample analyses. The depth to Base 10K ranges from 240 m (800 ft) in Elk Hills to 800 m (2650 ft) in the adjacent Buena Vista syncline and is 670 m (2,200 ft) deep in the Coles Levee area to the east. Log-calculated salinities show a relatively smooth increase with depth prior to disposal activities whereas salinities calculated from logs collected near and after disposal activities show a more variable salinity profile with depth. The effect of produced water injection is represented by log resistivity profiles that change from low resistivity at the base of the sand to higher resistivity near the top due to density differences between the saline produced water and the brackish groundwater within each sand. Continued post-disposal logging in new wells in the 18G disposal area on the south flank of Elk Hills shows that injected water has migrated approximately 1,200 m (4,000 ft) downdip (south) over a period of 20 years since the inception of disposal activity.

California↗
USGS2004

Mapping saline groundwater beneath the Sea Galilee and its vicinity using time domain electromagnetic (TDEM) geophysical technique

An extensive time domain electromagnetic (TDEM) survey covering the Sea of Galilee with a dense grid of points has been recently carried out. A total of 269 offshore and 33 supplementary onshore TDEM soundings were performed along six N-S and ten W-E profiles and at selected points both offshore and onshore along the whole coastal line. The interpreted resistivities were calibrated with the direct salinity measurements in the Haon-2 borehole and relatively deep (5 m) cores taken from the lake bottom. It was found that resistivities below 1 ohm-m are solely indicative of groundwater salinity exceeding 10,000 mg Cl/l. Such low resistivities (high salinities) were detected at depths greater than 15 m below almost the entire bottom of the lake. At some parts of the lake, particularly in the south, the saline water was detected at shallower depths, sometimes at a few meters below the bottom. Relatively high resistivity (fresh groundwater) was found along the margins of the lake down to roughly 100 m, the maximum exploration depth of the system. The detected sharp lateral contrasts at the lake margin between high and low resistivities coincide with the faults separating the carbonate and clastic units, respectively. The geometry of the fresh/saline groundwater interface below the central part of the lake is very similar to the shape of the lake bottom, probably due to the diffusive salt transport from the bottom sediments to the lake water. The above geophysical observations suggest differentsalt transport mechanisms from the sediments to the central part of the lake (diffusion) and from regional aquifers to the margins of the lake (advection). ?? 2004 Science From Israel/LPPLtd.

Israel Journal of Earth Sciences↗
USGS2004

Geophysical data reveal the crustal structure of the Alaska range orogen within the aftershock zone of the Mw 7.9 Denali fault earthquake

Geophysical information, including deep-crustal seismic reflection, magnetotelluric ( mt ), gravity, and magnetic data, cross the aftershock zone of the 3 November 2002 M w 7.9 Denali fault earthquake. These data and aftershock seismicity, jointly interpreted, reveal the crustal structure of the right-lateral-slip Denali fault and the eastern Alaska Range orogen, as well as the relationship between this structure and seismicity. North of the Denali fault, strong seismic reflections from within the Alaska Range orogen show features that dip as steeply as 25° north and extend downward to depths between 20 and 25 km. These reflections reveal crustal structures, probably ductile shear zones, that most likely formed during the Late Cretaceous, but these structures appear to be inactive, having produced little seismicity during the past 20 years. Furthermore, seismic reflections mainly dip north, whereas alignments in aftershock hypocenters dip south. The Denali fault is nonreflective, but modeling of mt , gravity, and magnetic data suggests that the Denali fault dips steeply to vertically. However, in an alternative structural model, the Denali fault is defined by one of the reflection bands that dips to the north and flattens into the middle crust of the Alaska Range orogen. Modeling of mt data indicates a rock body, having low electrical resistivity (>10 Ω·m), that lies mainly at depths greater than 10 km, directly beneath aftershocks of the Denali fault earthquake. The maximum depth of aftershocks along the Denali fault is 10 km. This shallow depth may arise from a higher-than-normal geothermal gradient. Alternatively, the low electrical resistivity of deep rocks along the Denali fault may be associated with fluids that have weakened the lower crust and helped determine the depth extent of the aftershock zone.

Alaska↗
USGS2016

Acquisition of a unique onshore/offshore geophysical and geochemical dataset in the Northern Malawi (Nyasa) Rift

The Study of Extension and maGmatism in Malawi aNd Tanzania (SEGMeNT) project acquired a comprehensive suite of geophysical and geochemical datasets across the northern Malawi (Nyasa) rift in the East Africa rift system. Onshore/offshore active and passive seismic data, long‐period and wideband magnetotelluric data, continuous Global Positioning System data, and geochemical samples were acquired between 2012 and 2016. This combination of data is intended to elucidate the sedimentary, crustal, and upper‐mantle architecture of the rift, patterns of active deformation, and the origin and age of rift‐related magmatism. A unique component of our program was the acquisition of seismic data in Lake Malawi, including seismic reflection, onshore/offshore wide‐angle seismic reflection/refraction, and broadband seismic data from lake‐bottom seismometers, a towed streamer, and a large towed air‐gun source.

Seismological Research Letters↗