Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth System Science Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,193 records · Page 23Linked to original sources
USGS2026

Comparative assessment of STIC sensors, streamflow and rain gauges for quantifying river connectivity in intermittent systems

In intermittent stream systems, including those occurring in Texas, USA, the severity of low-flow conditions, duration of seasonal disconnection, and frequency of no-flow events have been amplified by drought. Documentation of these no-flow events is necessary to evaluate ecosystem health. However, many intermittent reaches remain un-gauged given that perennial river sec-tions are often prioritized for gauge placement. Our objectives were to 1) document stream flow using Stream Temperature, Intermittency, and Conductivity (STIC) loggers to determine the frequency and duration of no-flow events in intermittent tributaries of the Colorado River, Texas and 2) compare logger data to publicly available data from streamflow discharge and precipitation gauge networks to understand differences among these data types for drying event characterization. We use these comparisons to summarize benefits and limitations of the application of in-stream data loggers. STIC loggers were deployed at 19 sites, one in each pool and riffle habitat of a stream reach. STIC loggers recorded a measurement of relative conductance every six hours from June 2022 to March 2024, which was used to determine the presence or absence of flow connectivity in a reach. No-flow duration among intermittent reaches varied between 37 and 270 days across tributaries during an ongoing drought in the study area. Overall, logger data was more precise than discharge data for characterizing no-flow events or precipitation data when documenting presence of water in the stream channel due to runoff. Lack of discharge gauges in intermittent tributaries left large sections of stream reaches undocumented and resulted in mischaracterization of flow patterns. Drought severity across the tributaries did not follow longitudinal patterns that would be expected by the climatic precipitation gradient of the study area. More research is needed to determine if factors such as population size affect severity. Likewise, precipitation data did not correlate well with logger water presence data, lacking consideration for groundwater recharge, soil hydrophobicity, and surface compaction. This study shows that to monitor no-flow events, detailed spatial datasets are necessary and that STIC loggers are useful tools that provide data to fill spatial information gaps and facilitate more accurate flow characterization and water presence data in intermittent systems.

Texas↗
USGS2024

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch↗
USGS2025

Characterizing Meteor Crater impact melts through geochemistry and textural analysis

The U.S. Geological Survey Astrogeology Science Center houses the Meteor Crater sample collection, an assemblage of over 2,500 meters of cuttings from 161 drill holes into Meteor Crater’s rim, flanks, and ejecta blanket. We have utilized this unique collection to study the composition and spatial distribution of impact-generated materials from within the ejecta blanket. Meteor Crater has historically been known to have generated only a relatively small amount of impact melt compared to other terrestrial craters of similar size. A detailed compositional and textural dataset of impact-derived melts from this impact can therefore be a useful asset in improving our understanding of crater formation, and in particular impact melt formation. We have characterized 42 impact-melt particles from Meteor Crater using a scanning electron microscope and an electron microprobe for textural and compositional analysis. We analyzed samples from six drill holes in the ejecta blanket, situated to the northwest, southeast, south, and southwest of the crater (ejecta northeast of the crater is devoid of impact melts). Impact melts were collected from drill cuttings at various depths within the ejecta blanket, ranging from a few centimeters below the surface down to ~6.5 meters. Backscattered electron (BSE) images were acquired for each analyzed impact-melt particle. To characterize the various textures and phases present in each impact melt, we also took many detailed BSE images. Our geochemical analyses include full spectral profiles using energy dispersive X-ray spectrometry and well-calibrated wavelength dispersive spectrometry for a number of phases, including minerals (olivine, pyroxene, and so on), pristine glass, and metallic inclusions. The full dataset is available in ScienceBase as a data release (Gullikson and others, 2024), accessible at https://doi.org/10.5066/P9OGAJ8P . Our goal for this Open-File Report is to provide a summary of this immense dataset, details on data collection, descriptions of the different phases observed within impact-melt particles (both geochemically and texturally), and observable trends.

Arizona↗
USGS2025

Petrogenesis and mineralization potential of spinifex komatiitic basalts in the Bradley Peak greenstone terrane, Wyoming Province

Komatiitic volcanic rocks are important hosts of Ni sulfide mineralization and record early Earth evolution; however, those in the well-studied Archean Wyoming Province have received little attention. Here, we elucidate the timing and petrogenesis of the Bradley Peak komatiitic volcanic rocks using field and textural observations, geochronology, and geochemistry. Detrital and igneous zircon U-Pb ages for two samples from previously undated units support published age determinations, placing the eruption age at 2.72 Ga. Stratigraphy of the volcanic flows was mapped and 36 samples including cumulates, greenschists, and spinifex-textured rocks were collected. Whole-rock geochemistry was used to classify the spinifex-textured samples as Al-undepleted komatiitic basalts (11–17 wt% MgO). Platinum-group element concentrations (n = 25) are like those in global Al-undepleted komatiitic basalts, and PGE/Ti ratios do not indicate the volcanic flows likely host sulfide mineralization. Initial ε Nd values of −0.5 to +4.7 (n = 16), indicate that these lavas were derived from a depleted mantle source and have negligible evolved crust contamination. The primary magma to the komatiitic basalt flows is estimated to have had 19 wt% MgO and be derived from ∼15 to 25 % mantle partial melting at 3–4 GPa. Trace element chemistry and thermodynamic modeling suggest the primary melt assimilated local banded iron formation. Although the Bradley Peak komatiitic basalts do not contain positive evidence of magmatic sulfide deposits, depleted Au in the flows suggests they could be source rocks for nearby orogenic gold deposits.

Wyoming↗
USGS2025

Mapping bedrock outcrops in the Sierra Nevada Mountains (California, USA) using machine learning

Accurate, high-resolution maps of bedrock outcrops can be valuable for applications such as models of land–atmosphere interactions, mineral assessments, ecosystem mapping, and hazard mapping. The increasing availability of high-resolution imagery can be coupled with machine learning techniques to improve regional bedrock outcrop maps. In the United States, the existing 30 m U.S. Geological Survey (USGS) National Land Cover Database (NLCD) tends to misestimate extents of barren land, which includes bedrock outcrops. This impacts many calculations beyond bedrock mapping, including soil carbon storage, hydrologic modeling, and erosion susceptibility. Here, we tested if a machine learning (ML) model could more accurately map exposed bedrock than NLCD across the entire Sierra Nevada Mountains (California, USA). The ML model was trained to identify pixels that are likely bedrock from 0.6 m imagery from the National Agriculture Imagery Program (NAIP). First, we labeled exposed bedrock at twenty sites covering more than 83 km 2 (0.13%) of the Sierra Nevada region. These labels were then used to train and test the model, which gave 83% precision and 78% recall, with a 90% overall accuracy of correctly predicting bedrock. We used the trained model to map bedrock outcrops across the entire Sierra Nevada region and compared the ML map with the NLCD map. At the twenty labeled sites, we found the NLCD barren land class, even though it includes more than just bedrock outcrops, accounted for only 41% and 40% of mapped bedrock from our labels and ML predictions, respectively. This substantial difference illustrates that ML bedrock models can have a role in improving land-cover maps, like NLCD, for a range of science applications.

California↗
USGS2024

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗
USGS2024

Identifying transportation data and system needs for a Federal lands transportation data platform

Executive Summary Modern transportation and land-use planning efforts include information from many sources to address topics such as safety, efficiency, commercial, and social needs. This wide breadth of topics provides opportunities for collaboration and development of common tools for diverse users. In many cases, different information systems provide the spatial data and geographic content necessary for transportation and land-use planners to consider multiple lines of evidence. The Federal Highway Administration Office of Federal Lands Highway (FLH) and Federal Land Management Agency partners use detailed spatial and quantitative data to inform transportation decisions. However, logistic challenges to data sharing exist because data are often managed by separate agencies; data-exchange frameworks and interagency data agreements are insufficient; and consistency from aggregated data requires maintenance, coordination, and supporting infrastructure. The FLH and U.S. Geological Survey collaboratively examined (1) use and availability of spatial data for transportation planning and (2) a possible mechanism to use more shared and consistent data in a common planning environment. The goals of this collaborative effort were to describe data needs from the perspective of planners and to identify opportunities for shared data resources. Results presented here focus on two workshops and a subsequent investigation of data and tools available from partner agencies. The objectives of this report are to (1) describe information used in transportation planning with geographic data; (2) identify spatially explicit data that inform transportation plans and could be shared among all partners; and (3) describe current platforms, planning and administrative opportunities, and potential barriers to developing an integrated planning tool. Key information and data needs were identified in three major classes: system, user, and influential factors. System data are parts of the transportation network and information about the condition of individual segments and the network. User data provide details about the function of the system and insights into potential needs; for example, user trips between source and destinations inform road and network demands that can lead to congestion and safety issues (in the future, user data might also include scenarios and projections based on land-use plans). Influential data represent social and environmental factors that influence transit demands and network conditions. These factors could be popular locations or seasonal events that influence demand and congestion; wildlife habitat or migration intersections that affect safety and management priorities; or geologic features that influence hazards, maintenance, and safety. Responses described here provide specific information for web-tool design and give a framework for interagency communication and cooperation to address specific information needs for integrated planning. Existing web-mapping and web-services, and the data that inform them, are also described. Commonly, these data are created and published by one agency, and the core users are outside of that agency; for example, threatened species distributions are published by the U.S. Fish and Wildlife Service for consideration by planners in advance of National Environmental Policy Act (42 U.S.C. 4321 et seq.) evaluation. This report is provided to inform FLH leaders and Federal Land Management Agency partners by articulating user needs and requirements for integrated planning tool(s). Programmers creating a secure web-based data-sharing platform (with data-viewing, -analysis and -download functions) can use the information presented here to organize data and user interfaces. This integrated perspective can help FLH and Federal Land Management Agency partners develop transportation networks that better serve the needs of people in local communities and across States and the Nation.

Open-File Report↗
USGS2025

Using public participatory geographic information systems (PPGIS) to explore uses and values for Mojave Trails National Monument, California

Many people ascribe a variety of values to public lands and waters, but some values are more difficult to assess and quantify than others. Public participatory geographic information systems (PPGIS) are tools that have been used to help quantify and map the public’s diverse values for a landscape. This work describes the first known Office of Management and Budget–approved use of PPGIS by a Department of the Interior bureau. The U.S. Geological Survey developed an internet-based application to aid in gathering PPGIS data, called Values Mapping for Planning in Regional Ecosystems (VaMPIRE). Further, this work describes the first pilot of the VaMPIRE application in coordination with the Bureau of Land Management to collect spatial data and other survey data regarding the public’s uses of and values for locations within Mojave Trails National Monument. We emailed the link to the VaMPIRE application to an interested party email list in 2024 with 207 valid emails and received 74 responses; we also received 47 responses from members of an off-roading social media group. Of the list of 16 value options, recreation was the most popular value for the monument, followed by wilderness and inspirational. Over 1,000 points were placed throughout the monument, indicating locations people use or value, with the locations spread throughout the entire monument. Additionally, most survey respondents stated their ability to receive benefits in locations they mapped would not change in response to a hypothetical scenario related to recreational facility development. This report describes exploratory results from the first use of the VaMPIRE tool in Mojave Trails National Monument and includes reflections on how the process went and considerations for future use of VaMPIRE.

California↗
USGS2025

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California↗
USGS2025

Meet the people where they are: Assessing user needs for aftershock forecast products in El Salvador, Mexico and the United States

Aftershock forecasts can help communities reduce their seismic risk by conveying how many aftershocks can be expected following a large earthquake, and how the expected number of aftershocks and their corresponding ground shaking evolves over time and space. Prior work finds that graphical forecast products may communicate such information better than only text or numbers. To identify which visual products can serve multiple user groups, we held workshops with members of several professions, including emergency managers, engineers, critical infrastructure operators, public health specialists, science communicators, and more. We conducted these workshops in El Salvador, Mexico and the United States to understand which forecast products may be effective across different countries. In these workshops, users performed small-group activities to elicit the types of aftershock forecast information that would support decisions in their respective roles and how this information would optimally be displayed. Maps of shaking hazards were frequently requested across all professions and countries, even for dissimilar forecast uses. The design of these maps, and other product needs, were differentiated by profession, country and other factors. Other forecast products, including those showing forecasts about the magnitudes and time periods of future aftershocks, also served a variety of users, but for different types of decisions. We found a greater variation in user needs by profession than by country, and that user needs also vary with time, communication channel and other contextual factors. We discuss practical implications for user-centered visual communication of operational aftershock forecasts.

International Journal for Disaster Risk Reduction↗
USGS2023

Prediction of the probability of elevated nitrate concentrations at groundwater depths used for drinking-water supply in the Puget Sound basin, Washington, 2004–19

The Puget Sound basin encompasses the 13,700-square-mile area that drains to the Puget Sound and the adjacent marine waters of Washington State. Well more than 4 million people live within the basin, with numbers continuing to increase, who rely on the basin’s natural resources including groundwater. The Puget Sound Partnership was created by a Washington State statute to implement a science-based recovery of the Puget Sound to help address impacts to these resources. As part of the recovery, the partnership developed the Puget Sound Vital Signs as measures of ecosystem health that guide the assessment of progress toward Puget Sound recovery goals. The Puget Sound Partnership Leadership Council adopted a Drinking Water Vital Sign associated with human health and quality of life, recognizing certain indicators as integral to the sustainability of Puget Sound recovery efforts. One such Vital Sign indicator was the vulnerability of groundwater throughout the aquifers of the Puget Sound basin to elevated nitrate concentrations as defined by the probability of exceeding 2 milligrams/liter (mg/L) at a specific location and well depth. The U.S. Geological Survey (USGS) led the effort to characterize groundwater vulnerability. For this study, groundwater vulnerability refers to a probability with which a contaminant applied at or near the land surface can migrate to the aquifer of interest for a given set of land-use practices. Nitrate concentration data were selected for evaluation because elevated nitrate concentrations are typically caused by anthropogenic activities and have been associated with deleterious impacts on human health. To identify groundwater vulnerability to elevated nitrate concentrations, logistic regression was used to relate anthropogenic (human associated) and natural variables to the occurrence of elevated nitrate concentrations in untreated groundwater from large public water supply system wells found within the Washington State Department of Health Sentry database. Variables that were analyzed included well depth, soil hydraulic conductivity, precipitation, population density, fertilizer application amounts, and land-use types. Statistically significant models that predicted the probabilities of groundwater nitrate concentrations greater than 2 mg/L based on the predictor variables were created for the time periods 2000–04, 2005–09, 2010–14, and 2015–19. For all time periods, well depth and a measure of the abundance of urban and agricultural land over or near the well consistently helped explain the vulnerability of the well to elevated nitrate concentrations defined as a probability of exceeding 2 mg/L of nitrate. Precipitation and (or) soil hydraulic conductivity were also important predictor variables in the models. The models for each time period were used to create maps of groundwater vulnerability at 150- and 300-foot depths throughout the Puget Sound basin. As expected, the most vulnerable locations were associated with shallower well depths and increased agriculture and urban land cover. Across all four time periods, groundwater vulnerability throughout the Puget Sound was low, with probabilities of exceeding 2 mg/L concentrations of nitrate at depths at 150 and 300 feet typically less than 50 percent. Results also found a slight decrease in probabilities of elevated nitrate concentrations throughout the basin over time. More specifically, additional statistical tests found that groundwater with probabilities of less than about 60 percent declined from 2000 to 2019 and represented more than 75 percent of the modeled Puget Sound basin aquifer. Wells with greater than 60 percent probability increased over the same time period but represented only about 25 percent of the aquifer. The maps and statistical analysis presented in the study provide valuable and informative evaluation of the vulnerability of groundwater in the Puget Sound basin to elevated nitrate concentrations. The probability maps do not represent measured nitrate concentrations in groundwater, but rather they present the probability that nitrate concentrations exceed 2 mg/L. The models and predictions from this study are a viable indicator for the Puget Sound Partnership’s Healthy Human Population—Drinking Water Vital Sign. The logistic regression modeling approach presented here benefits water managers by allowing them to assess temporal trends in a range of probabilities, explore vulnerability changes as new regional land cover and anthropogenic data are generated, and distinguish vulnerabilities at different depths within the aquifer.

Washington↗
USGS2026

Regreening, restoring, and reconnecting a southwestern wetland ecosystem – the Zeedyk wetland

Alluvial wetland ecosystems are vital as biodiversity hotspots but are increasingly threatened by anthropogenic stressors and drought. These pressures are especially acute in arid and semi-arid regions, where eco-hydrologic connectivity is fragile and recovery is slow. This study quantifies the efficacy of nature-based solutions, particularly the ‘Zeedyk approach,’ which employs low-tech Natural Infrastructure in Dryland Streams (NIDS)—including rock detention structures—to slow surface water, raise groundwater tables, and restore wetland function at a spring-fed wetland in Cebolla Canyon, New Mexico, U.S.A. Our results depict a Restoration Feedback Loop that captures stages of change from a healthy wetland in 1935, altered by 20th-century agriculture and grazing, to the re-establishment of the historical flow regime by 2024 documented through an 89-year archive of aerial imagery (1935–2024). By the end of our study period, the Spring-Fed Wetland had expanded by roughly 229% of the original 1935 area, to 4.13 ha. Using 40 years of satellite data, we assess changes in vegetation and hydrology with remote sensing indices. Spatial and temporal analyses reveal significant increases in vegetation greenness and wetness, particularly in an Expanded Wetland subregion, which exhibited ∼3.5x higher wetness and ∼1.5x higher greenness trends compared to adjacent areas. Monthly metrics highlight seasonal variability, with increases in greenness linked to monsoonal rainfall and lateral water redistribution, indicating that restoration impacts extend beyond the primary wetland. This study demonstrates the utility of cloud-based platforms like Google Earth Engine and USGS EarthExplorer for long-term monitoring of wetland restoration, while quantifying the efficacy of the ‘Zeedyk approach’ and demonstrating its potential as a scalable method to restore and conserve wetland meadows in other arid and semi-arid landscapes.

New Mexico↗
USGS2000

Use of a ground-penetrating radar system to detect pre- and post-flood scour at selected bridge sites in New Hampshire, 1996-98

Ground-penetrating radar was used to measure the depth and extent of existing and infilled scour holes and previous scour surfaces at seven bridges in New Hampshire from April 1996 to November 1998. Ground-penetrating-radar survey techniques initially were used by the U.S. Geological Survey to study streambed scour at 30 bridges. Sixteen of the 30 bridges were re-surveyed where floods exceeded a 2-year recurrence interval. A 300-megahertz signal was used in the ground-penetrating radar system that penetrated through depths as great as 20 feet of water and as great as 32 feet of streambed materials. Existing scour-hole dimensions, infilled thickness, previous scour surfaces, and streambed materials were detected using ground-penetrating radar. Depths to riprap materials and pier footings were identified and verified with bridge plans. Post data-collection-processing techniques were applied to assist in the interpretation of the data, and the processed data were displayed and printed as line plots. Processing included distance normalization, migration, and filtering but processing was kept to a minimum and some interference from multiple reflections was left in the record. Of the 16 post-flood bridges, 22 ground-penetrating-radar cross sections at 7 bridges were compared and presented in this report. Existing scour holes were detected during 1996 (pre-flood) data collection in nine cross sections where scour depths ranged from 1 to 3 feet. New scour holes were detected during 1998 (post-flood) data collection in four cross sections where scour depths were as great as 4 feet deep. Infilled scour holes were detected in seven cross sections, where depths of infilling ranged from less than 1 to 4 feet. Depth of infilling by means of steel rod and hammer was difficult to verify in the field because of cobble and boulder streambeds or deep water. Previous scour surfaces in streambed materials were identified in 15 cross sections and the depths to these surfaces ranged from 1 to 10 feet below the streambed. Riprap materials or pier footings were identified in all cross sections. Calculated record depths generally agree with bridge plans. Pier footings were exposed at two bridges and steel pile was exposed at one bridge. Exposures were verified by field observations.

New Hampshire↗
USGS2026

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California↗
USGS2025

Physicochemical properties and bioreactivity of sub-10 µm geogenic particles: Comparison of volcanic ash and desert dust

Exposure to ambient particulate matter (PM) with an aerodynamic diameter of <10 μm (PM 10 ) is a well-established health hazard. There is increasing evidence that geogenic (Earth-derived) particles can induce adverse biological effects upon inhalation, though there is high variability in particle bioreactivity that is associated with particle source and physicochemical properties. In this study, we investigated physicochemical properties and biological reactivity of volcanic ash from the April 2021 eruption of La Soufrière volcano, St. Vincent, and two desert dust samples: a standardized test dust from Arizona and an aeolian Gobi Desert dust sampled in China. We determined particle size, morphology, mineralogy, surface texture and chemistry in sub-10 μm material to investigate associations between particle physicochemical properties and observed bioreactivity. We assessed cellular responses (cytotoxic and pro-inflammatory effects) to acute particle exposures (24 hr) in monocultures at the air-liquid interface using two types of cells of the human airways: BEAS-2B bronchial epithelial cells and A549 alveolar type II epithelial cells. In acellular assays, we also assessed particle oxidative potential and the presence of microorganisms. The results showed that volcanic ash and desert dust exhibit intrinsically different particle morphology, surface textures and chemistry, and variable mineralogical content. We found that Gobi Desert dust is more bioreactive than freshly erupted volcanic ash and Arizona test dust, which is possibly linked to the presence of microorganisms (bacteria) and/or nanoscale elongated silicate minerals (potentially clay such as illite or vermiculite) on particle surfaces.

GeoHealth↗
USGS2025

Observing northern high-latitude river systems to understand changes in a warming Arctic

Purpose of Review Streams and rivers are undergoing rapid change as the Arctic warms and thaws. We review recent observations in Arctic stream systems to identify ubiquitous changes and the most useful tools for observing change and exploring the underlying processes. Recent Findings Recent literature indicates increasingly significant trends in river hydrology and chemistry due to persistent warming in the Arctic and longer observational records for analysis. However, regional differences in the magnitude and direction of these trends persist. We also observe thresholds in ground thaw and surface–groundwater interactions that can impact river hydrology and chemistry. Summary Warming and thaw are occurring rapidly at high latitudes, resulting in increasing, yet variable responses in stream systems across regions and scales. These differences highlight the need for long-term records and an interdisciplinary approach to explain trends and predict future states. Stream systems respond to multiple landscape changes related to hydrology (changing precipitation and subsurface flow), geology (ground thaw dynamics), and ecology (vegetation change).

Current Climate Change Reports↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗