Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources
USGS1995

Quaternary soils and dust deposition in southern Nevada and California

Eolian dust constitutes much of the pedogenic material in late Pleistocene and Holocene soils of many arid regions of the world. Comparison of the compositions and influx rates of modern dust with the eolian component of dated soils at 24 sites in southern Nevada and California yields information on (1) the composition and influx rate of dust in late Pleistocene and Holocene soils, (2) paleoclimate and its effects on the genesis of aridic soils, especially with regard to dustfall events, (3) the timing and relative contribution of dust from playa sources versus alluvial sources, and (4) the effects of accumulation of dust in soil horizons. The <2 mm fractions of A and B horizons of soils formed on gravelly alluvial-fan deposits in the study area are similar to modern dust in grain size, content of CaCO 3 and salt, major oxides, and clay mineralogy; thus, they are interpreted to consist largely of dust. The major-oxide compositions of the shallow soil horizons are nearly identical to that of the modern dust, but the compositions of progressively deeper horizons approach that of the parent material. The clay mineralogy of modern dust at a given site is similar to that of the Av horizons of nearby Holocene soils but is commonly different from the mineralogies of deeper soil horizons and of the Av horizons of nearby Pleistocene soils. These results are interpreted to indicate that dust both accumulates and is transformed in Av horizons with time. Changes in soil-accumulation rates provide insights into the interplay of paleoclimate, dust supply, and soil-forming processes. Modern dust-deposition rates are more than large enough to account for middle and late Holocene soil-accumulation rates at nearly all sites. However, the early Holocene soil-accumulation rates in areas near late Pleistocene pluvial lakes are much higher than modern rates and clearly indicate a dust-deflation and -deposition event that caused rapid formation of fine-grained shallow soil horizons on uppermost Pleistocene and lower Holocene deposits. We interpret late Pleistocene soil-accumulation rates to indicate that dust-deposition rates were low during this period but that increased effective moisture during the late Wisconsinan favored translocation of clay and CaCO 3 from near the surface to deeper in the soil profile. Pre–late Pleistocene rates are very low in most areas, mainly due to a pedogenic threshold that was crossed when accumulations of silt, clay, and CaCO 3 began to inhibit the downward transport of eolian material, but in part due to erosion.

Geological Society of America Bulletin↗
USGS1997

Quaternary history of sea ice and paleoclimate in the Amerasia basin, Arctic Ocean, as recorded in the cyclical strata of Northwind Ridge

The 19 middle-early Pleistocene to Holocene bipartite lithostratigraphic cycles observed in high-resolution piston cores from Northwind Ridge in the Amerasia Basin of the Arctic Ocean, provide a detailed record of alternating glacial and interglacial climatic and oceanographic conditions and of correlative changes in the character and thickness of the sea-ice cover in the Amerasia Basin. Glacial conditions in each cycle are represented by gray pelagic muds that are suboxic, laminated, and essentially lacking in microfossils, macrofossils, trace fossils, and generally in glacial erratics. Interglacial conditions are represented by ochre pelagic muds that are oxic and bioturbated and contain rare to abundant microfossils and abundant glacial erratics.

Geological Society of America Bulletin↗
USGS2001

Origin of late Quaternary dune fields on the Southern High Plains of Texas and New Mexico

Mostly stabilized late Holocene eolian sands on the Southern High Plains of the United States were studied to determine their origins and to assess whether present dune stability depends more strongly on sediment supply, sediment availability, or transport limitations. Geomorphic, sedimentological, and geochemical trends indicate that late Holocene dunes formed under westerly paleowinds, broadly similar to those of today. Mineralogical and geochemical data indicate that the most likely source for the sands is not the Pecos River valley, but the Pleistocene Blackwater Draw Formation, an older, extensive eolian deposit in the region. These observations suggest that new sand is supplied whenever vegetation cover is diminished to the extent that the Blackwater Draw Formation can be eroded, in agreement with modern observations of wind erosion in the region. We conclude, therefore, that Southern High Plains dunes are stabilized primarily due to a vegetation cover. The dunes are thus sediment-availability limited. This conclusion is consistent with the observation that, in the warmest, driest part of the region (where vegetation cover is minimal), dunes are currently active over a large area. Geochemical data indicate that Southern High Plains dunes are the most mineralogically mature (quartz rich) sands yet studied in the Great Plains, which suggests a long history of eolian activity, either in the dune fields or during deposition of the Blackwater Draw Formation.

New Mexico, Texas↗
USGS2002

Paleoseismology at high latitudes: Seismic disturbance of upper Quaternary deposits along the Castle Mountain fault near Houston, Alaska

Most paleoseismic studies are at low to moderate latitudes. Here we present results from a high-latitude (61°30′ N) trenching study of the Castle Mountain fault in south-central Alaska. This fault is the only one known in the greater Anchorage, Alaska, area with historical seismicity and a Holocene fault scarp. It strikes east-northeast and cuts glacial and postglacial sediments in an area of boreal spruce-birch forest, shrub tundra, and sphagnum bog. The fault has a prominent vegetation lineament on the upthrown, north side of the fault. Nine trenches were logged across the fault in glacial and postglacial deposits, seven along the main trace, and two along a splay. In addition to thrust and strike-slip faulting, important controls on observed relationships in the trenches are the season in which faulting occurred, the physical properties of the sediments, liquefaction, a shallow water table, soil-forming processes, the strength of the modern root mat, and freeze-thaw processes. Some of these processes and physical properties are unique to northern-latitude areas and result in seismic disturbance effects not observed at lower latitudes. The two trenches across the Castle Mountain fault splay exposed a thrust fault and few liquefaction features. Radiocarbon ages of soil organic matter and charcoal within and overlying the fault indicate movement on the fault at ca. 2735 cal. (calendar) yr B.P. and no subsequent movement. In the remaining seven trenches, surface faulting was accompanied by extensive liquefaction and a zone of disruption 3 m or more wide. The presence of numerous liquefaction features at depths of <0.5–1.0 m indicates faulting when the ground was not frozen—i.e., from about April to October. Sandy-matrix till, sand, silt, gravel, and pebbly peat were injected up to the base of the modern soil, but did not penetrate the interlocking spruce-birch root mat. The strength of the root mat prohibited development of a nonvegetated scarp face and colluvial wedge. In only one trench did we observe a discrete fault plane with measurable offset. It lay beneath a 2-m-thick carapace of liquefied sand and silt and displayed a total of 0.9–1.85 m of thrust motion since deposition of the oldest deposits in the trenches at ca. 13,500 yr B.P. We found liquefaction ejecta on paleosols at only one other trench, where there were bluejoint ( Calamagrostis canadensis ) tussocks that lacked an extensive root mat. From crosscutting relationships, we interpret three paleoliquefaction events on the main trace of the Castle Mountain fault: 2145–1870, 1375–1070, and 730–610 cal. yr B.P. These four earthquakes on the Castle Mountain fault in the past ∼2700 yr indicate an average recurrence interval of ∼700 yr. As it has been 600–700 yr since the last significant earthquake, a significant (magnitude 6–7) earthquake in the near future may be likely. Paleoseismic data indicate that the timing and recurrence interval of megathrust earthquakes is similar to the timing and recurrence interval of Castle Mountain fault earthquakes, suggesting a possible link between faulting on the megathrust and on “crustal” structures.

Alaska↗
USGS1973

Late Quaternary sedimentation in the active eastern Aleutian Trench

Sediments originally deposited on the Alaskan Abyssal Plain have been depressed to form the eastern Aleutian Trench. Simultaneously, a wedge of horizontally bedded sediments, about 1 km thick at its axis, has been deposited in the trench. The time-transgressive facies change between this wedge of sediment and the abyssal-plain sediment sequence shows up as a discontinuity on seismic records. Sediment is being deposited up to 10 times faster in the trench than on the abyssal plain. Ninety percent of the sediment in the trench arrived there by moving down the trench wall as slumps or in turbidity currents, and has been partly redistributed by turbidity currents flowing in a channel along the trench axis; 7 percent has come from the Surveyor Channel distribution system on the abyssal plain; and 3 percent is pelagic (mainly ice rafted). Sediments pass from a sandy facies near the trench wall to a silt-mud facies on the abyssal plain. If a similar trench were exposed on land, the stratigraphic sequence would consist of sandstone grading transitionally downward into shale, and then into an abyssal-plain sequence. Sediment fill in the Aleutian Trench is abnormally thick as a result of Pleistocene glaciation; Neogene trench-fill sediments would be less than 800 m thick.

Alaska↗
USGS1985

10Be analysis of a Quaternary weathering profile in the Virginia Piedmont

Samples from a residual weathering profile in the Virginia Piedmont have been analyzed for cosmogenic 10 Be. Concentrations are highest in clay-rich soil and decrease exponentially to a depth of about 15 m. Despite uncertainties about the processes by which 10 Be may be intercepted before entering the solum and eroded after incorporation, a minimum age may be calculated for the regolith. This calculation is based on the delivery rate of 10 Be and its decay rate and suggests that this residual profile developed during a period no shorter than 8 × 10 5 yr. The calculated minimum age may be within a factor of 2 of maximum-age estimates based on surface lowering by erosion and on the rate of rock weathering to saprolite. The vertical distribution of 10 Be in the profile could result from a steady-state balance of deposition, weathering, radioactive decay, and erosion.

Geology↗
USGS1996

Isotopic evidence for shifts in atmospheric circulation patterns during the late Quaternary in mid-North America

Wyoming is now at the eastern margin of westerlies originating in the Pacific, but in the Pleistocene appears to have received moisture from elsewhere, possibly the Gulf of Mexico. Oxygen isotope ratios of pedogenic carbonate in postglacial terraces correspond to ratios in equilibrium with present meteoric waters, which show a strong relation to precipitation seasonality and storm sources. In contrast, the oxygen isotope ratios of all pre-Holocene soils are significantly more positive, even though the carbon isotope composition of coexisting organic matter suggests that the carbonate formed in temperatures cooler than today. The oxygen isotope ratios of paleowaters in mid–North America appear to be more useful for identifying past storm sources than for estimating paleotemperatures.

Geology↗
USGS1999

Late Quaternary slip rate and seismic hazards of the West Klamath Lake fault zone near Crater Lake, Oregon Cascades

Crater Lake caldera is at the north end of the Klamath graben, where this N10°W-trending major Basin and Range structure impinges upon the north-south–trending High Cascades volcanic arc. East-facing normal faults, typically 10–15 km long, form the West Klamath Lake fault zone, which bounds the graben on its west side. The fault zone terminates on the south near the epicentral area of the September 1993 Klamath Falls earthquakes. It continues north past Crater Lake as the Annie Spring fault, which is within ∼1 km of the west caldera rim, and Red Cone Spring fault. We have determined a long-term vertical slip rate of 0.3 mm/yr for these two faults using high-precision K-Ar and 40 Ar/ 39 Ar age measurements on offset lava flows ranging in age from ca. 35 to 300 ka. Holocene offset reported by Hawkins et al. and epicenters of eight M W 2 earthquakes in 1994 and 1995 indicate that the West Klamath Lake fault zone is active. Empirical relations between earthquake magnitudes and scarp heights or fault lengths suggest that the fault zone is capable of producing earthquakes as large as M W 7¼. Earthquakes on these or other faults of the zone could trigger landslides and rockfalls from the walls of the caldera, possibly resulting in large waves on Crater Lake.

Oregon↗
USGS2003

Quaternary low-angle slip on detachment faults in Death Valley, California

Detachment faults on the west flank of the Black Mountains (Nevada and California) dip 29??-36?? and cut subhorizontal layers of the 0.77 Ma Bishop ash. Steeply dipping normal faults confined to the hanging walls of the detachments offset layers of the 0.64 Ma Lava Creek B tephra and the base of 0.12-0.18 Ma Lake Manly gravel. These faults sole into and do not cut the low-angle detachments. Therefore the detachments accrued any measurable slip across the kinematically linked hanging-wall faults. An analysis of the orientations of hundreds of the hanging-wall faults shows that extension occurred at modest slip rates (<1 mm/yr) under a steep to vertically oriented maximum principal stress. The Black Mountain detachments are appropriately described as the basal detachments of near-critical Coulomb wedges. We infer that the formation of late Pleistocene and Holocene range-front fault scarps accompanied seismogenic slip on the detachments.

Geology↗
USGS2006

Geomorphological, depositional, and foraminiferal indicators of late Quaternary tectonic uplift in Iskenderun Bay, Turkey

Iskenderun Bay is a major shallow embayment in the eastern part of the Mediterranean Sea, where the African and Anatolian Plates converge. This tectonically active basin was investigated for oceanographic, sedimentological, geochemical, and foraminiferal parameters. On the basis of the data acquired, the distribution of living and fossil foraminifera in 284 grab and 54 gravity core samples was determined, the basin floor bathymetry of the bay constructed, radiocarbon ages of sediments and fossils ascertained, and depositional environments reconstructed. It has been discovered that for the last 13.5 k.y., water masses were stratified and sedimentation was discontinuous within the basin, which is characterized by irregular sea bottom morphology. The sedimentation rate was very slow, varying in time and space from 0 to 0.012 cm yr −1 . The foraminiferal distributions were spatially varied and discontinuous and indicate a reversal from deep to shallow marine conditions in the cores. These irregularities were attributed to active tectonics in the bay and a major tectonic uplift of the bay since the late Pleistocene.

Iskenderun Bay↗
USGS2009

Sedimentary constraints on late Quaternary lake-level fluctuations at Bear Lake, Utah and Idaho

A variety of sedimentological evidence was used to construct the lake-level history for Bear Lake, Utah and Idaho, for the past ???25,000 years. Shorelines provide evidence of precise lake levels, but they are infrequently preserved and are poorly dated. For cored sediment similar to that in the modern lake, grain-size distributions provide estimates of past lake depths. Sedimentary textures provide a highly sensitive, continuous record of lake-level changes, but the modern distribution of fabrics is poorly constrained, and many ancient features have no modern analog. Combining the three types of data yields a more robust lake-level history than can be obtained from any one type alone. When smooth age-depth models are used, lake-level curves from multiple cores contain inconsistent intervals (i.e., one record indicates a rising lake level while another record indicates a falling lake level). These discrepancies were removed and the multiple records were combined into a single lake-level curve by developing age-depth relations that contain changes in deposition rate (i.e., gaps) where indicated by sedimentological evidence. The resultant curve shows that, prior to 18 ka, lake level was stable near the modern level, probably because the lake was overflowing. Between ca. 17.5 and 15.5 ka, lake level was ???40 m below the modern level, then fluctuated rapidly throughout the post-glacial interval. Following a brief rise centered ca. 15 ka ( = Raspberry Square phase), lake level lowered again to 15-20 m below modern from ca. 14.8-11.8 ka. This regression culminated in a lowstand to 40 m below modern ca. 12.5 ka, before a rapid rise to levels above modern ca. 11.5 ka. Lake level was typically lower than present throughout the Holocene, with pronounced lowstands 15-20 m below the modern level ca. 10-9, 7.0, 6.5-4.5, 3.5, 3.0-2.5, 2.0, and 1.5 ka. High lake levels near or above the modern lake occurred ca. 8.5-8.0, 7.0-6.5, 4.5-3.5, 2.5, and 0.7 ka. This lake-level history is more similar to records from Pyramid Lake, Nevada, and Owens Lake, California, than to those from Lake Bonneville, Utah. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2014

Glacial and Quaternary geology of the northern Yellowstone area, Montana and Wyoming

This field guide focuses on the glacial geology and paleoecology beginning in the Paradise Valley and progressing southward into northern Yellowstone National Park. During the last (Pinedale) glaciation, the northern Yellowstone outlet glacier flowed out of Yellowstone Park and down the Yellowstone River Valley into the Paradise Valley. The field trip will traverse the following Pinedale glacial sequence: (1) deposition of the Eightmile terminal moraines and outwash 16.5 ± 1.4 10Be ka in the Paradise Valley; (2) glacial recession of ~8 km and deposition of the Chico moraines and outwash 16.1 ± 1.7 10Be ka; (3) glacial recession of 45 km to near the northern Yellowstone boundary and moraine deposition during the Deckard Flats readjustment 14.2 ± 1.2 10Be ka; and (4) glacial recession of ~37 km and deposition of the Junction Butte moraines 15.2 ± 1.3 10Be ka (this age is a little too old based on the stratigraphic sequence). Yellowstone's northern range of sagebrush-grasslands and bison, elk, wolf, and bear inhabitants is founded on glacial moraines, sub-glacial till, and outwash deposited during the last glaciation. Floods released from glacially dammed lakes and a landslide-dammed lake punctuate this record. The glacial geologic reconstruction was evaluated by calculation of basal shear stress, and yielded the following values for flow pattern in plan view: strongly converging—1.21 ± 0.12 bars (n = 15); nearly uniform—1.04 ± 0.16 bars (n = 11); and strongly diverging—0.84 ± 0.14 bars (n = 16). Reconstructed mass balance yielded accumulation and ablation each of ~3 km3/yr, with glacial movement near the equilibrium line altitude dominated by basal sliding. Pollen and charcoal records from three lakes in northern Yellowstone provide information on the postglacial vegetation and fire history. Following glacial retreat, sparsely vegetated landscapes were colonized first by spruce parkland and then by closed subalpine forests. Regional fire activity increased significantly with the development of closed subalpine forests as a result of increased fuel biomass and warmer summers. Warm dry conditions prevailed at low elevations during the early Holocene, as indicated by the presence of steppe and open mixed conifer forest. At the same time, closed subalpine forests with low fire frequency were present at higher elevations, suggesting relatively wet summer conditions. Douglas fir populations expanded throughout northern Yellowstone in the middle Holocene as a result of effectively drier conditions than before, and a decline of mesophytic plant taxa during the late Holocene imply continued drying, even though fire frequency decreased in recent millennia.

Montana;Wyoming↗
USGS2008

Origin and paleoclimatic significance of late Quaternary loess in Nebraska: Evidence from stratigraphy, chronology, sedimentology, and geochemistry

Loess is one of the most extensive surficial geologic deposits in midcontinental North America, particularly in the central Great Plains region of Nebraska. Last-glacial-age loess (Peoria Loess) reaches its greatest known thickness in the world in this area. New stratigraphic, geochronologic, mineralogic, and geochemical data yield information about the age and provenance of Peoria Loess, as well as evaluation of recent climate models. Sixteen new radiocarbon ages and recently acquired optically stimulated luminescence ages indicate that Peoria Loess deposition in Nebraska occurred between ca. 25,000 cal yr B.P. and ca. 13,000 cal yr B.P. After ca. 13,000 cal yr B.P. a period of pedogenesis began, represented by the dark, prominent Brady Soil. At some localities, further loess deposition was minimal. At other localities, sometime after ca. 11,000 cal yr B.P., there were additional episodes of loess deposition (Bignell Loess) intermittently throughout the Holocene. The spatial variability of particle size abundances in Peoria Loess shows a northwest-to-southeast fining in Nebraska, consistent with maps of previous workers that show a northwest-to-southeast thinning of loess. These observations indicate that paleowinds that deposited the loess were from the west or northwest and that the source or sources of Peoria Loess lay to the west or northwest. New mineralogical and geochemical data indicate that the most important sources of loess were likely Tertiary siltstones of the White River and Arikaree Groups, silt facies of Pliocene eolian sediments, and small contributions from Pierre Shale. It is likely that fine-grained silts were transported episodically through the Nebraska Sand Hills from Tertiary and Cretaceous bedrock sources to the north, in agreement with a model presented recently. The identification of Tertiary siltstones and silts as the primary sources of loess is consistent with isotopic data presented in a companion paper. Contributions of glaciogenic silt from the Platte and Missouri Rivers were limited to loess zones close to the valleys of those drainages. An earlier computer-based model of global dust generation during the last glacial period did not identify the Great Plains of North America as a significant source of nonglaciogenic eolian silt. However, a refined version of this model does simulate this region as a significant non-glacial dust source during the last glacial period, in good agreement with the results presented here.

Nebraska↗
USGS2008

Isotopic evidence for the diversity of late Quaternary loess in Nebraska: Glaciogenic and nonglaciogenic sources

Pb isotope compositions of detrital K-feldspars and U-Pb ages of detrital zircons are used as indicators for determining the sources of Peoria Loess deposited during the last glacial period (late Wisconsin, ca. 25&ndash;14 ka) in Nebraska and western Iowa. Our new data indicate that only loess adjacent to the Platte River has Pb isotopic characteristics suggesting derivation from this river. Most Peoria Loess in central Nebraska (up to 20 m thick) is non-glaciogenic, on the basis of Pb isotope ratios in K-feldspars and the presence of 34-Ma detrital zircons. These isotopic characteristics suggest derivation primarily from the Oligocene White River Group in southern South Dakota, western Nebraska, southeastern Wyoming, and northeastern Colorado. The occurrence of 10&ndash;25 Ma detrital zircons suggests additional minor contributions of silt from the Oligocene-Miocene Arikaree Group and Miocene Ogallala Group. Isotopic data from detrital K-feldspar and zircon grains from Peoria Loess deposits in eastern Nebraska and western Iowa suggest that the immediate source of this loess was alluvium of the Missouri River. We conclude that this silt probably is of glaciogenic origin, primarily derived from outwash from the western margin of the Laurentide Ice Sheet. Identification of the White River Group as the main provenance of Peoria Loess of central Nebraska and the Missouri River valley as the immediate source of western Iowa Peoria Loess indicates that paleowind directions during the late Wisconsin were primarily from the northwest and west, in agreement with earlier studies of particle size and loess thickness variation. In addition, the results are in agreement with recent simulations of non-glaciogenic dust sources from linked climate-vegetation modeling, suggesting dry, windy, and minimally vegetated areas in parts of the Great Plains during the last glacial period.

Nebraska↗
USGS2015

Late Quaternary slip history of the Mill Creek strand of the San Andreas fault in San Gorgonio Pass, southern California: The role of a subsidiary left-lateral fault in strand switching

The fault history of the Mill Creek strand of the San Andreas fault (SAF) in the San Gorgonio Pass region, along with the reconstructed geomorphology surrounding this fault strand, reveals the important role of the left-lateral Pinto Mountain fault in the regional fault strand switching. The Mill Creek strand has 7.1&ndash;8.7 km total slip. Following this displacement, the Pinto Mountain fault offset the Mill Creek strand 1&ndash;1.25 km, as SAF slip transferred to the San Bernardino, Banning, and Garnet Hill strands. An alluvial complex within the Mission Creek watershed can be linked to palinspastic reconstruction of drainage segments to constrain slip history of the Mill Creek strand. We investigated surface remnants through detailed geologic mapping, morphometric and stratigraphic analysis, geochronology, and pedogenic analysis. The degree of soil development constrains the duration of surface stability when correlated to other regional, independently dated pedons. This correlation indicates that the oldest surfaces are significantly older than 500 ka. Luminescence dates of 106 ka and 95 ka from (respectively) 5 and 4 m beneath a younger fan surface are consistent with age estimates based on soil-profile development. Offset of the Mill Creek strand by the Pinto Mountain fault suggests a short-term slip rate of &sim;10&ndash;12.5 mm/yr for the Pinto Mountain fault, and a lower long-term slip rate. Uplift of the Yucaipa Ridge block during the period of Mill Creek strand activity is consistent with thermochronologic modeled uplift estimates.

Geological Society of America Bulletin↗
USGS2018

Late Neogene–Quaternary tephrochronology, stratigraphy, and paleoclimate of Death Valley, California, USA

Sedimentary deposits in midlatitude continental basins often preserve a paleoclimate record complementary to marine-based records. However, deriving that paleoclimate record depends on having well-exposed deposits and establishing a sufficiently robust geochronology. After decades of research, we have been able to correlate 77 tephra beds exposed in multiple stratigraphic sections in the Death Valley area, California, United States. These correlations identify 25 different tephra beds that erupted from at least five different volcanic centers from older than 3.58 Ma to ca. 32 ka. We have informally named and determined the ages for seven previously unrecognized beds: ca. 3.54 Ma tuff of Curry canyon, ca. 3.45 Ma tuff of Furnace Creek, ca. 3.1 Ma tuff of Kit Fox Hills, ca. 3.1 Ma tuff of Mesquite Flat, ca. 3.15 Ma tuff of Texas Spring, 3.117 ± 0.011 Ma tuff of Echo Canyon, and the ca. 1.3 Ma Amargosa ash bed. Several of these tephra beds are found as far northeast as central Utah and could be important marker beds in western North America. Our tephrochronologic data, combined with magnetic polarity data and 40 Ar/ 39 Ar age determinations, redefine Neogene sedimentary deposits exposed across 175 km 2 of the Death Valley area. The alluvial/lacustrine Furnace Creek Formation is a time-transgressive sedimentary sequence ranging from ca. 6.0 to 2.5 Ma in age. The ca. 2.5–1.7 Ma Funeral Formation is typically exposed as a proximal alluvial-fan facies overlying the Furnace Creek Formation. We have correlated deposits in the Kit Fox Hills, Salt Creek, Nova Basin, and southern Death Valley with the informally named ca. 1.3–0.5 Ma Mormon Point formation. In addition, our correlation of the late Pleistocene Wilson Creek ash bed 15 in the Lake Rogers deposits represents the first unambiguous sequences deposited during the Last Glacial Maximum (marine isotope stage [MIS] 2) in Death Valley. Based on this new stratigraphic framework, we show that the Pliocene and Pleistocene climate in Death Valley is consistent with the well-established marine tropical/subtropical record. Pluvial lakes in Death Valley and Searles Valley began to form ca. 3.5–3.4 Ma in the late Pliocene during MIS MG5. Initiation of lakes in these two hydrologically separated valleys at the same time at the beginning of a cooling trend in the marine climate record suggests a link to a cooler, wetter (glacial) regional climate in North America. The Death Valley lake persisted until ca. 3.30 Ma, at the peak of the M2 glaciation, after which there is no evidence of Pliocene lacustrine deposition, even at the peak of the Northern Hemisphere Glaciation (ca. 2.75 Ma). If pluvial lakes in the Pliocene are an indirect record of glacial climate conditions, as they are for the Pleistocene, then a glacial climate was present in western North America for ∼200,000 yr during the Pliocene, encompassing MIS MG5–M2. Pleistocene pluvial lakes in Death Valley that formed ca. 1.98–1.78 Ma, 1.3–1.0 Ma, and ca. 0.6 Ma (MIS 16) are consistent with other regional climate records that indicate a regional glacial climate; however, Death Valley was relatively dry at ca. 0.77 Ma (MIS 19), when large lakes existed in other basins. The limited extent of the MIS 2 marsh/shallow lake in the Lake Rogers basin of northern Death Valley reflects the well-known regional glacial climate at that time; however, Death Valley received relatively lower inflow and rainfall in comparison.

Geological Society of America Bulletin↗