Geology ReportsSearch

SEARCH · Geology Reports

Results for “Geologic Notes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

Satellite image atlas of glaciers of the world

U.S. Geological Survey Professional Paper 1386, Satellite Image Atlas of Glaciers of the World, contains 11 chapters designated by the letters A through K. Chapter A provides a comprehensive, yet concise, review of the "State of the Earth's Cryosphere at the Beginning of the 21st Century: Glaciers, Global Snow Cover, Floating Ice, and Permafrost and Periglacial Environments," and a "Map/Poster of the Earth's Dynamic Cryosphere," and a set of eight "Supplemental Cryosphere Notes" about the Earth's Dynamic Cryosphere and the Earth System. The next 10 chapters, B through K, are arranged geographically and present glaciological information from Landsat and other sources of historic and modern data on each of the geographic areas. Chapter B covers Antarctica; Chapter C, Greenland; Chapter D, Iceland; Chapter E, Continental Europe (except for the European part of the former Soviet Union), including the Alps, the Pyrenees, Norway, Sweden, Svalbard (Norway), and Jan Mayen (Norway); Chapter F, Asia, including the European part of the former Soviet Union, China, Afghanistan, Pakistan, India, Nepal, and Bhutan; Chapter G, Turkey, Iran, and Africa; Chapter H, Irian Jaya (Indonesia) and New Zealand; Chapter I, South America; Chapter J, North America (excluding Alaska); and Chapter K, Alaska. Chapters A–D each include map plates.

Professional Paper

Thickness and consolidation of deep-sea sediments: A discussion

Hamilton (1959) concluded that in most sediments excess pore-water pressure is equal to zero - that is, the hydrostatic pressure is at atmospheric pressure. This note points out that in terrestrial environments the occurrence of artesian water (excess pore-water pressure) is commonplace and widespread and that such excess pressure is the source of energy for flowing water wells and for many flowing oil wells, "gushers," or "blowouts".

Bulletin of the Geological Society of America

User’s guide and metada for the PICES Nonindigenous Species Information System

Introduction Welcome to the PICES Nonindigenous Species Information System, a Microsoft Access database that displays the biogeographic distributions, invasion status, vectors, and key life history attributes of the approximately 740 reported nonindigenous species (NIS) in the estuarine and near-coastal habitats of the North Pacific and Hawaii. This database was developed by the U.S. Environmental Protection Agency and the U.S. Geological Survey under the auspices of Working Group 21 (Invasive Species) of the North Pacific Marine Science Organization (PCIES). The PICES database contains the data used to generate the “Atlas of Nonindigenous Marine and Estuarine Species in the North Pacific” (Lee and Reusser, 2012; herein referred to as the “Atlas”). The User’s Guide provides instructions on how to use the PICES database as well as metadata for the database and the Atlas. We note that for most users, the Atlas provides a simpler approach to accessing key information on NIS in the PICES countries than the database, though the database does provide additional information on species and sources as well as allowing users to extract information on specific taxa and/or locations (see Section 4). The PICES database also includes species reported from the PICES Rapid Assessment Surveys (RAS). PICES sponsored four rapid assessment surveys with the objective of quickly characterizing the native, non-native, and cryptogenic species present in different locations. Surveys were sponsored in Dalian, China in 2008, Jeju, Korea in 2009, Newport, Oregon, USA in 2010, and Peter the Great Bay, near Vladivostok and Nakhodka, Russia in 2011 ( http://www.pices.int/publications/pices_press/volume19/v19_n1/pp_30-31_Kobe-WS_f.pdf , http://www.pices.int/publications/pices_press/volume20/v20_n1/pp_26-29_RAS-2011.pdf ). The PICES database contains the RAS species that were made available in time for inclusion. Thus, the database does not capture all the species found in these surveys. In addition, much of the information on the RAS species was provided by the experts conducting the survey, and their distributions, environmental requirements, and life history attributes were not evaluated to the same level of detail by the PICES authors as the North Pacific NIS. In lieu of the more extensive review as conduced with the Atlas species, the information on the RAS species needs to be considered preliminary. Additionally, it is important to use the “Map All Distributions” option (see Section 3.6.6) when mapping their distribution or conducting a query. The general reference for the RAS surveys in the PICES database is “PICES Working Group 21, YEAR SURVEY”. The overall goal of both the database and Atlas was to simplify and standardize the dissemination of distributional, habitat, and life history characteristics of near-coastal and estuarine nonindigenous species. This database provides a means of querying these data and displaying the information in a consistent format. The specific classes of information the database captures include: Regional and global ranges of native and nonindigenous near-coastal and estuarine species at different hierarchical spatial scales. Habitat and physiological requirements of near-coastal and estuarine species. Life history characteristics of near-coastal and estuarine species. Invasion history and vectors for nonindigenous species. This standardized and synthesized data in the database and the Atlas provide the basic information needed to address a number of managerial and scientific needs. Thus, users will be able to: Create a baseline on the extent of invasion by region in order to assess new invasions. Use existing geographical patterns of invasion to gain some insights into potential new invaders. Use existing geographical patters of invasion to gain some insights into mechanisms affecting relative invasibility of different areas. Use life history attributes and environmental requirements of the reported nonindigenous species to evaluate traits of invaders. Understand the potential spread of invaders based on their habitat and environmental requirements. Understand importance of different vectors of introduction of nonindigenous species by region. The data in the Atlas of Nonindigenous Marine and Estuarine Species in the North Pacific (Lee and Reusser, 2012) are up-to-date as of June 2012. Updates to the PICES database were made in September 2012.

Report

California deepwater investigations and groundtruthing (Cal DIG) I: Fault and shallow geohazard analysis offshore Morro Bay

The California Deepwater Investigations and Groundtruthing (Cal DIG) I project focuses on the potential seafloor hazards and impacts of alternative energy infrastructure in the outer continental shelf region offshore of south-central California. This is one of three reports covering a single study area located between Monterey and Point Conception, California in federal waters outside of the State of California three nautical mile limit and in water depths of 400 to 1500 meters. The goal of this report is to provide baseline geologic interpretations of the area for the purpose of improving regional models of shallow geologic hazards and sedimentary processes. Geophysical and geological data from this project will help to address important issues associated with marine spatial planning and potential offshore infrastructure development, such as offshore floating wind turbines. Datasets covered in this report include comprehensive high-resolution sub-bottom (multi-channel and Chirp seismic reflection profiles), seafloor (bathymetry), and sampling (piston, gravity, and vibracore) data collected in 2018-2019 during a series of seven seagoing geological and geophysical surveys. Specifically, this report outlines interpretation of subsurface geologic structure from the geophysical data, details preliminary core analysis results related to fluid, gas, and sediment transport activity, provides interpretations of the current geohazards in the area, and suggests next steps for improving interpretations of geohazard processes. Specific targets of geohazard interest in the study area are geological structures such as faults and folds, seafloor pockmarks within a large field (the Big Sur pockmark field), submarine channels, and mass wasting (slope failure) features. The vast majority of faults and other structures in the study occur within sediment and rock formations we interpret to be pre-Quaternary (older than 2.58 Myr BP), and thus we interpret that these structures are unlikely to present significant current hazard to seabed infrastructure, although we note that the numerous structures mapped in the study area may have the potential to become reactivated. Similarly, we find no new evidence of Holocene (younger than 11,650 years BP) fluid or gas advection in the Big Sur pockmark field. However, such fluid and gas hazards are currently difficult to assess, as additional analyses and sampling of existing core data is needed to better understand pockmark formation processes and potential gas accumulations we have mapped in the subsurface. Mass wasting along the eastern and western edges of the Santa Lucia Bank during earthquakes, as well as sediment transport down the Lucia Chica and San Simeon channels, are among the most significant, although still likely infrequent during the Holocene, hazards to seabed stability in the study area. Further analyses of the existing cores, including radiocarbon dating, stable isotope, and compositional analyses, are again needed to better understand the timing and sources of the numerous sand deposits found throughout the study area, which may have been transported downslope due to mass wasting and/or earthquake shaking processes.

California

Flood-Inundation Maps of Selected Areas Affected by the Flood of October 2015 in Central and Coastal South Carolina

Heavy rainfall occurred across South Carolina during October 1–5, 2015, as a result of an upper atmospheric low-pressure system that funneled tropical moisture from Hurricane Joaquin into the State. The storm caused major flooding in the central and coastal parts of South Carolina. Almost 27 inches of rain fell near Mount Pleasant in Charleston County during this period. U.S. Geological Survey (USGS) streamgages recorded peaks of record at 17 locations, and 15 other locations had peaks that ranked in the top 5 for the period of record. During the October 2015 flood event, USGS personnel made about 140 streamflow measurements at 86 locations to verify, update, or extend existing rating curves (which are used to compute streamflow from monitored river stage). Immediately after the storm event, USGS personnel documented 602 high-water marks, noting the location and height of the water above land surface. Later in October, 50 additional high-water marks were documented near bridges for South Carolina Department of Transportation. Using a subset of these high-water marks, 20 flood-inundation maps of 12 communities were created. Digital datasets of the inundation area, modeling boundary, and water depth rasters are all available for download.

South Carolina

Paleoslumps in coal-bearing strata of the Breathitt Group (Pennsylvanian), Eastern Kentucky Coal Field, U.S.A

The benefits of geologic analysis for roof-control studies and hazard prediction in coal mines are well documented. Numerous case studies have illustrated the importance of recognizing geologic features such as paleochannels, coal riders, and kettlebottoms in mine roofs. Relatively understudied features, in terms of mining, are paleoslumps .Paleoslumps represent ancient movement and rotation of semi-consolidated sediment. Because bedding in paleoslumps is deformed or inclined, these features cause instability in mine roofs, haul roads, surface highwalls, and other excavations. Various types of paleoslumps above coals in the Eastern Kentucky Coal Field were studied in order to aid in their recognition and prediction in mines. The paleoslumps studied all showed characteristic slump-deformation features, although some differences in magnitude of deformation and overall slump size were noted. Coals beneath slumps often exhibited folding, reverse displacements, truncation, clastic dikes, and locally increased thickness. Slumps are inferred to have been triggered by a wide range of mechanisms, such as loading of water-saturated sediment on rigid substrates, synsedimentary faulting, and over-pressurization of channel margin and bar slopes. Analysis of paleoslumps in underground mines, where paleoslumps are viewed from beneath rather than in profile is difficult, since characteristic bed rotation may not be conspicuous. Sudden increases in bed-dip angle inferred from changes in rock type or bedding contacts in the roof; occurrence of bounding, polished rotation surfaces; or roof irregularity and occurrence of loading features may indicate the presence of paleoslumps. Another key to recognition may be the sudden appearance of over-thickened coal, which can occur because of slump-created paleotopography, synsedimentary faults, and slump-generated overthrusting. In addition, steeply inclined, folded, or transported coal marginal to paleoslumps can create apparent increases in coal thickness in cores. Although thick coals are obviously a target of exploration, anomalously thick coals may actually indicate adjacent paleoslumps accompanied by hazardous roof conditions and loss of seam thickness.

International Journal of Coal Geology

Rare-earth elements

The rare-earth elements (REEs) are 15 elements that range in atomic number from 57 (lanthanum) to 71 (lutetium); they are commonly referred to as the “lanthanides.” Yttrium (atomic number 39) is also commonly regarded as an REE because it shares chemical and physical similarities and has affinities with the lanthanides. Although REEs are not rare in terms of average crustal abundance, the concentrated deposits of REEs are limited in number. Because of their unusual physical and chemical properties, the REEs have diverse defense, energy, industrial, and military technology applications. The glass industry is the leading consumer of REE raw materials, which are used for glass polishing and as additives that provide color and special optical properties to the glass. Lanthanum-based catalysts are used in petroleum refining, and cerium-based catalysts are used in automotive catalytic converters. The use of REEs in magnets is a rapidly increasing application. Neodymium-iron-boron magnets, which are the strongest known type of magnets, are used when space and weight are restrictions. Nickel-metal hydride batteries use anodes made of a lanthanum-based alloys. China, which has led the world production of REEs for decades, accounted for more than 90 percent of global production and supply, on average, during the past decade. Citing a need to retain its limited REE resources to meet domestic requirements as well as concerns about the environmental effects of mining, China began placing restrictions on the supply of REEs in 2010 through the imposition of quotas, licenses, and taxes. As a result, the global rare-earth industry has increased its stockpiling of REEs; explored for deposits outside of China; and promoted new efforts to conserve, recycle, and substitute for REEs. New mine production began at Mount Weld in Western Australia, and numerous other exploration and development projects noted in this chapter are ongoing throughout the world. The REE-bearing minerals are diverse and often complex in composition. At least 245 individual REE-bearing minerals are recognized; they are mainly carbonates, fluorocarbonates, and hydroxylcarbonates (n = 42); oxides (n = 59); silicates (n = 85); and phosphates (n = 26). Many of the world’s significant REE deposits occur in carbonatites, which are carbonate igneous rocks. The REEs also have a strong genetic association with alkaline magmatism. The systematic geologic and chemical processes that explain these observations are not well understood. Economic or potentially economic REE deposits have been found in (a) carbonatites, (b) peralkaline igneous systems, (c) magmatic magnetite-hematite bodies, (d) iron oxide-copper-gold (IOCG) deposits, (e) xenotime-monazite accumulations in mafic gneiss, (f) ion-absorption clay deposits, and (g) monazite-xenotime-bearing placer deposits. Carbonatites have been the world’s main source for the light REEs since the 1960s. Ion-adsorption clay deposits in southern China are the world’s primary source of the heavy REEs. Monazite-bearing placer deposits were important sources of REEs before the mid-1960s and may be again in the future. In recent years, REEs have been produced from large carbonatite bodies mined at the Mountain Pass deposit in California and, in China, at the Bayan Obo deposit in Nei Mongol Autonomous Region, the Maoniuping deposit in Sichuan Province, the Daluxiang deposit in Sichuan Province, and the Weishan deposit in Anhui Province. Alkaline igneous complexes have recently been targeted for exploration because of their enrichments in the heavy REEs. Information relevant to the environmental aspects of REE mining is limited. Little is known about the aquatic toxicity of REEs. The United States lacks drinking water standards for REEs. The concentrations of REEs in environmental media are influenced by their low abundances in crustal rocks and their limited solubility in most groundwaters and surface waters. The scarcity of sulfide minerals, including pyrite, minimizes or eliminates concerns about acid-mine drainage for carbonatite-hosted deposits and alkaline-intrusion-related REE deposits. For now, insights into environmental responses of REE mine wastes must rely on predictive models.

Professional Paper

Records and water-level measurements of selected wells and chemical analysis of ground water, East Shore area, Davis, Weber, and Box Elder Counties

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources and (2) to supplement an interpretive report that will be published later. Records were collected during the period 1935-61 by the U.S. Geological Survey in cooperation with the Utah State Engineer as a part of the investigation of the ground-water resources of the East Shore area in Davis, Weber, and southern Box Elder Counties, Utah. During the period 1952-61 additional records were collected by the U.S. Bureau of Reclamation. The interpretive material will be published cooperatively by the U.S. Geological Survey and the Utah State Engineer as a report entitled "Groundwater conditions in the East Shore area, Utah, 1953-61," by Ralph E. Smith. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells as shown on the tables and figures. From table 1 he can note (1) the depth and diameter of wells in the vicinity and the yield of some of those wells, and (2) the depth to water or the feet of water pressure in wells in the vicinity; from table 2 and figure 2 he may note the historic fluctuations and trends of water levels in the vicinity; and from tables 3 and l he may note the chemical quality of the water from wells in the vicinity and the use made of this water. If the reader decides from his examination that conditions are favorable, he may place an application to drill a well with the State Engineer. If the State Engineer believes unappropriated water is available, the application may be approved after minimum statutory requirements have been satisfied. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Utah

Contributions to economic geology, 1902

This bulletin has been prepared primarily with a view to securing prompt publication of the economic results of investigations by the United States Geological Survey. It is designed to meet the wants of the busy man, and is so condensed that he will be able to obtain results and conclusions with a minimum expenditure of time and energy. It also affords a better idea of the work which the Survey as an organization is-carrying on for the direct advancement of mining interests throughout the country than can readily be obtained from the more voluminous reports. Should this bulletin be favorably received by those interested in the development of the mineral industries of the United States, it is proposed to publish early in each calendar year a similar bulletin containing the results of the last year's field work in economic geology. In the preparation of the present volume, promptness of publication has been made secondary only to the economic utility of the material presented. The papers included are such only as have a direct economic bearing, all questions of purely scientific interest being excluded. The papers represent three classes : (1) Preliminary discussions of the results of extended economic investigations, which will later be published by the Survey in more detailed form; (2) comparatively detailed descriptions of occurrences of economic interest, noted by geologists of the Survey in the course of their field work, but not of sufficient importance to necessitate a later and more extended description; (3) abstracts of certain economic papers which have appeared in Survey publications during the last year, chiefly such as give a general account of the distribution and mode of occurrence of particular mineral deposits throughout the United States. The papers have been grouped according to the subjects treated. At the end of each section is given a list of previous publications on that subject by this Survey. These lists will be found serviceable by those who wish to ascertain what has been accomplished by the Survey in the investigation of any particular group of mineral products. They are generally confined to Survey publications, though a few titles of important papers published elsewhere by members of the Survey are included.

Bulletin

Environmental issues associated with fossil fuel resources; an evaluation of research opportunities for the U.S. Geological Survey's Energy Resources Program

Fossil fuel consumption in the United States has nearly tripled within the last 50 years (fig. 1), and is expected to continue increasing. As our knowledge and awareness of environmental consequences related to fossil fuel extraction and use grow, we as a nation, face the challenge of balancing our energy requirements with a desire for environmentally cleaner fuel. To help meet this challenge, the Energy Resources Program (ERP) of the Geologic Division (GD), U.S. Geological Survey (USGS) sponsored three internal workshops and a World Wide Web (WWW) workshop. The primary goal of these workshops was to identify those environmental issues that are related to fossil fuels, are national in scope, and are within the purview of the USGS as an earth-science government agency. Those issues so identified will be prioritized according to ERP's future research plan and according to the extent they provide an environmental framework for ERP's petroleum and coal assessments. The purpose of this paper is to provide the results of the internal and WWW workshops as proposed topics of research for future ERP work, delineate studies to answer the questions related to each proposed research area, and link the studies to the seven science goals of the Geologic Division. The information provided herein will be used in preparing the USGS Geologic Division's FY2000 prospectus and ERP's next five-year strategic plan. Acknowledgements. The authors wish to acknowledge information on ERP environmental projects provided by Les Magoon, Paul Lillis, Keith Kvenvolden, Tom Lorenson, and Bob Rosenbauer. Peter Schweitzer was instrumental in providing the software for the WWW workshop, Cheryl Adkisson for constructing the workshop web pages, and Laura Friedrich for constructing the web pages summarizing the internal workshops. Stan Mroczkowski, Jim Otton, Donna Read, and Dorothy Tanti provided notes of or logistical assistance for the internal workshops. This report reflects the collective input of numerous USGS managers and scientists their participation in the workshops is greatly appreciated.

Open-File Report

Preliminary report on stratigraphy and structure of the area of Kigalik and Awuna Rivers, Alaska

During the summer of. 1947, U. S. Geological Survey Party No. 2 made a reconnaissance survey of the area between Awuna River and the divide north of the Kigalik River. The westernmost observations were made along the Awuna anticline to longitude about 157°30' W. and along the Kigalik anticline to longitude about 156°55'W. The easternmost work was done along the Knife Blade Ridge anticline at a longitude of about 154°30'W. Not all of this area was traversed, but a general idea of the area studied may be had by noting the distribution of dip and strike symbols on Figure 1. Parts of this area had been previously visited by Smith 1/ in 1927 as a part of his traverse from Allakaket to the Arctic Coast. In the period from about July 10 to August 5 his party ascended the Awuna River and Birthday Creek, portaged over the Kigalik-Awuna divide at Birthday Pass, and descended the Kigalik River to its mouth. Various parties in the field season of 1946 worked in areas not far distant. Webber 2/ began his field work near the headwaters of the Meade River and measured a section across the Kigalik anticline about 25 miles beyond the westernmost observations made on that structure by Party No. 2. Work by Chapman and Thurrell 3/ along the Colville River parallels at a distance of three or four miles work by Party No. 2 in the vicinity of Knife Blade Ridge. The easternmost observations by Party No. 2 in the vicinity of Knife Blade Ridge are about 11 miles west of the area south of Maybe Creek mapped by Ray and Fischer.4/ Of the 1947 work of other field parties that of Thurrell 5/ along the Colville River is most closely related to this report. His thickness from the base of Zone A to his Trace No. 5 is included in Column 1 of Figure 3. Webber's work 6/ along the Ikpikpuk and Titaluk Rivers is also in a closely related area. Party No. 2 moved through this area by weasel, the weasels being used extensively on the daily traverses. The party assembled at Umiat late in May and was flown out to a lake about one mile west of the Ikpikpuk River at latitude 69°40' N. where the weasels and initial supplies had been previously cached. Early in June the party moved south into the area in which it was to begin work. For the next several weeks the party worked in the area north of the Kigalik River, moving westward along the divide north of that river. At this time considerable work was done south of the Kigalik River, west of longitude 154°40'W. No closure was detected along the Kigalik anticline. Shortly after the middle of July the party moved southwestward to the vicinity of the Awuna anticline where a westerly plunge had been suggested from the study of aerial photographs. The general route of the party from then on was eastward along the divide between the Awuna and Kigalik Rivers. Due to the need to reach a food cache further east very little data was gathered in the area between Birthday and Section Creeks. It was intended to work this area by one or two spike trips from the camp at the head of Section Creek. However, after constructing a cross-section from data gathered by the party along Section Creek and by Thurreli in the area between the Colville and Awuna Rivers it became apparent that the strata exposed along the axis of the Awuna anticline were stratigraphically below the base of Zone A. It thus appeared that there would be little point in attempting to gather additional data in the area between Birthday and Section Creeks. The party continued eastward, working along the south flank of the Kigalik anticline. On September 1, the party camped about one mile west of the summit of Knife Blade Ridge. Because of unfavorable weather at this time only a small amount of field work was accomplished in the next week. Enough data was gathered to give a general picture of the structure here, but the data on stratigraphy and structure is far from exhaustive. On September 9 the party moved eastward, camping that night about 3 miles northeast of :Wolf Creek, and arriving at Umiat on the afternoon of September 10. Aerial photographs were carried in the field and used to record the points at which observations were made. A considerable amount of data was recorded on the photographs. Approximate elevations were obtained, at first by aneroid barometers, and later by more sensitive airplane altimeters. Plane table and alidade were used in local traverses in the area north of the Kigalik River to obtain dips and strikes by the 'three-point method. Nearly all other dips and strikes recorded were measured by Brunton compass. Dips of 5° or less in the area south of the Kigalik River should, in general, be considered as dip components with only the approximate strike shown. These low dips were taken on bedding traces* where it was usually impossible to observe an accurate strike with the Brunton.

Alaska

United States Geological Survey uranium and thorium resource assessment and exploration research program, fiscal year 1977

The U.S. Geological Survey Uranium and Thorium Resource Assessment and Exploration Research Program began in July 1974 (FY 1975). The first year was spent chiefly in redirecting an on-going effort and in staffing for the nearly fourfold increase in funding. A summary of the Fiscal Year 1976 program, including objectives, program model, and project descriptions, is published as Open-File Report 75-575. The overall objectives and program model remain essentially the same as in FY 1976. It should be noted that the beginning of the fiscal year was changed from July 1 to October 1 during the 1976 calendar year and that a transitional quarter was used to make this change. Some program changes were made during the transitional quarter, but these details are not recorded in the present summary.

Open-File Report

USGS exploration geochemistry studies at the Pebble porphyry Cu-Au-Mo deposit, Alaska— Pdf of presentation

From 2007 through 2010, scientists in the U.S. Geological Survey (USGS) have been conducting exploration-oriented geochemical and geophysical studies in the region surrounding the giant Pebble porphyry Cu-Au-Mo deposit in southwestern Alaska. The Cretaceous Pebble deposit is concealed under tundra, glacial till, and Tertiary cover rocks, and is undisturbed except for numerous exploration drill holes. These USGS studies are part of a nation-wide research project on evaluating and detecting concealed mineral resources. This report focuses on exploration geochemistry and comprises illustrations and associated notes that were presented as a case study in a workshop on this topic. The workshop, organized by L.G. Closs and R. Glanzman, is called 'Geochemistry in Mineral Exploration and Development,' presented by the Society of Economic Geologists at a technical conference entitled 'The Challenge of Finding New Mineral Resources: Global Metallogeny, Integrative Exploration and New Discoveries,' held at Keystone, Colorado, October 2-5, 2010.

Alaska

Hydrologic changes after clear-cut logging in a small Oregon coastal watershed

Preliminary graphical analysis indicates that clear-cut logging of a small Oregon watershed has significantly altered certain hydrologic characteristics. After logging, moderate increases were noted in annual runoff, but no significant changes were detected in either peak or minimum flow rates. Both the annual sediment yields and the maximum monthly water temperatures increased greatly after logging; sediment yields and temperatures in the unlogged control watershed actually decreased during the postlogging period.

Oregon

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report

An Automated Cropland Classification Algorithm (ACCA) for Tajikistan by combining Landsat, MODIS, and secondary data

The overarching goal of this research was to develop and demonstrate an automated Cropland Classification Algorithm (ACCA) that will rapidly, routinely, and accurately classify agricultural cropland extent, areas, and characteristics (e.g., irrigated vs. rainfed) over large areas such as a country or a region through combination of multi-sensor remote sensing and secondary data. In this research, a rule-based ACCA was conceptualized, developed, and demonstrated for the country of Tajikistan using mega file data cubes (MFDCs) involving data from Landsat Global Land Survey (GLS), Landsat Enhanced Thematic Mapper Plus (ETM+) 30 m, Moderate Resolution Imaging Spectroradiometer (MODIS) 250 m time-series, a suite of secondary data (e.g., elevation, slope, precipitation, temperature), and in situ data. First, the process involved producing an accurate reference (or truth) cropland layer (TCL), consisting of cropland extent, areas, and irrigated vs. rainfed cropland areas, for the entire country of Tajikistan based on MFDC of year 2005 (MFDC2005). The methods involved in producing TCL included using ISOCLASS clustering, Tasseled Cap bi-spectral plots, spectro-temporal characteristics from MODIS 250 m monthly normalized difference vegetation index (NDVI) maximum value composites (MVC) time-series, and textural characteristics of higher resolution imagery. The TCL statistics accurately matched with the national statistics of Tajikistan for irrigated and rainfed croplands, where about 70% of croplands were irrigated and the rest rainfed. Second, a rule-based ACCA was developed to replicate the TCL accurately (∼80% producer’s and user’s accuracies or within 20% quantity disagreement involving about 10 million Landsat 30 m sized cropland pixels of Tajikistan). Development of ACCA was an iterative process involving series of rules that are coded, refined, tweaked, and re-coded till ACCA derived croplands (ACLs) match accurately with TCLs. Third, the ACCA derived cropland layers of Tajikistan were produced for year 2005 (ACL2005), same year as the year used for developing ACCA, using MFDC2005. Fourth, TCL for year 2010 (TCL2010), an independent year, was produced using MFDC2010 using the same methods and approaches as the one used to produce TCL2005. Fifth, the ACCA was applied on MFDC2010 to derive ACL2010. The ACLs were then compared with TCLs (ACL2005 vs. TCL2005 and ACL2010 vs. TCL2010). The resulting accuracies and errors from error matrices involving about 152 million Landsat (30 m) pixels of the country of Tajikistan (of which about 10 million Landsat size, 30 m, cropland pixels) showed an overall accuracy of 99.6% (k hat = 0.97) for ACL2005 vs. TCL2005. For the 3 classes (irrigated, rainfed, and others) mapped in ACL2005, the producer’s accuracy was >86.4% and users accuracy was >93.6%. For ACL2010 vs. TCL2010, the error matrix showed an overall accuracy on 96.2% (k hat = 0.96). For the 3 classes (irrigated, rainfed, and others) mapped in ACL2010, the producer’s and user’s accuracies for the irrigated areas were ≥82.9%. Any intermixing was overwhelmingly between irrigated and rainfed croplands, indicating that croplands (irrigated plus rainfed areas) as well as irrigated areas were mapped with high levels of accuracies (∼90% or higher) even for the independent year. The ACL2005 and ACL2010, each, were produced using ACCA algorithm in ∼30 min using a Dell Precision desktop T7400 computer for the entire country of Tajikistan once the MFDCs for the years were ready. The ACCA algorithm for Tajikistan is made available through US Geological Survey’s ScienceBase: http://www.sciencebase.gov/catalog/folder/4f79f1b7e4b0009bd827f548 or at: https://powellcenter.usgs.gov/globalcroplandwater/content/models-algorithms . The research contributes to the efforts of global food security through research on global croplands and their water use (e.g., https://powellcenter.usgs.gov/globalcroplandwater/ ). The above results clearly demonstrated the ability of a rule-based ACCA to rapidly and accurately produce cropland data layer year after year (hindcast, nowcast, forecast) for the country it was developed using MFDCs that consist of combining multiple sensor data and secondary data. It needs to be noted that the ACCA is applicable to the area (e.g., country, region) for which it is developed. In this case, ACCA is applicable for the Country of Tajikistan to hindcast, nowcast, and forecast agricultural cropland extent, areas, and irrigated vs. rainfed. The same fundamental concept of ACCA applies to other areas of the World where ACCA codes need to be modified to suite the area/region of interest. ACCA can also be expanded to compute other crop characteristics such as crop types, cropping intensities, and phenologies.

Remote Sensing

Graphic and algebraic solutions of the discordant lead-uranium age problem

Uranium-bearing minerals that give lead-uranium and lead—lead ages that are essentially in agreement, i.e. concordant, generally are considered to have had a relatively simple geologic history and to have been unaltered since their deposition. The concordant ages obtained on such materials are, therefore, assumed to approach closely the actual age of the minerals. Many uranium-bearing samples, particularly uranium ores, give the following discordant age sequences; Pb 206 U 238 &lt; Pb 207 U 235 &#x2AA1; Pb 207 Pb 206 "> Pb 206 U 238 <Pb 207 U 235 ⪡Pb 207 Pb 206 or, less frequently, Pb 207 Pb 206 &#x2AA1; Pb 207 U 235 &lt; Pb 206 U 238 "> Pb 207 Pb 206 ⪡Pb 207 U 235 <Pb 206 U 238 . These discordant age sequences have been attributed most often to uncertainties in the common lead correction, selective loss of radio-active daughter products, loss or gain of lead or uranium, or contamination by an older generation of radiogenic lead. The evaluation of discordant lead isotope age data may be separated into two operations. The first operation, with which this paper is concerned, is mechanical in nature and involves the calculation of the different possible concordant ages corresponding to the various processes assumed to have produced the discordant ages. The second operation is more difficult to define and requires, in part, some personal judgement. It includes a synthesis of the possible concordant age solutions with other independent geologic and isotopic evidence. The concordant age ultimately chosen as most acceptable should be consistent not only with the known events in the geologic history of the area, the age relations of the enclosing rocks, and the mineralogic and paragenetic evidence, but also with other independent age measurements and the isotopic data obtained on the lead in related or associated non-radioactive minerals. The calculation of the possible concordant ages from discordant age data has been greatly simplified by Wetherill's graphical method of plotting the mole ratios of radiogenic Pb 206 U 238 "> Pb 206 U 238 ( N 206 N 238 "> N 206 N 238 ) vs. radiogenic Pb 207 U 235 "> Pb 207 U 235 ( N 207 N 235 "> N 207 N 235 ) after correcting for the contaminating common Pb 206 and Pb 207 . The linear relationships noted in this graphical procedure have been extended to plots of the mole ratios of total Pb 206 U 238 "> Pb 206 U 238 ( t N 206 N 238 "> t N 206 N 238 ) vs. total Pb 207 U 235 "> Pb 207 U 235 ( t N 207 N 235 "> t N 207 N 235 ). This modification permits the calculation of concordant ages for unaltered samples using only the Pb 207 Pb 206 "> Pb 207 Pb 206 ratio of the contaminating common lead. If isotopic data are available for two samples of the same age, x and y , from the same or related deposits or outcrops, graphs of the normalized difference ratios [ ( N 206 N 204 )x &#x2212; ( N 206 N 204 )y ( N 238 N 204 )x &#x2212;( N 238 N 204 )y ] vs. [ ( N 207 N 204 )x &#x2212; ( N 207 N 204 )y ( N 235 N 204 )x &#x2212;( N 235 N 204 )y ] "> [(N 206 N 204 )x − (N 206 N 204 )y(N 238 N 204 )x −(N 238 N 204 )y] vs. [(N 207 N 204 )x − (N 207 N 204 )y(N 235 N 204 )x −(N 235 N 204 )y] can give concordant ages corrected for unknown amounts of a common lead with an unknown Pb 207 / Pb 206 ratio. (If thorium is absent the difference ratios may be normalized with the more abundant index isotope, Pb 208 .) Similar plots of tho normalized, difference ratios for three genetically related samples ( x − y ) and( x − z ), will give concordant ages corrected, in addition, for either one unknown period of past alteration or initial contamination by an older generation of radiogenic lead of unknown Pb 207 /Pb 206 ratio. Practical numerical solutions for many of tho concordant age calculations are not currently available. However, the algebraic equivalents of these new graphical methods give equations which may be programmed for computing machines. For geologically probable parameters the equations of higher order have two positive real roots that rapidly converge on the exact concordant ages corrected for original radiogenic lead and for loss or gain of lead or uranium. Modifications of these general age equations expanded only to the second degree have been derived for use with desk calculators. These graphical and algebraic methods clearly suggest both the type and minimum number of samples necessary for adequate mathematical analysis of discordant lead isotope age data. This mathematical treatment also makes it clear that discordant lead isotope data alone cannot provide the basis for the choice of one of the possible concordant age solutions. The new equations, in particular, provide an incentive to improve our physical constants, analytical techniques and sampling methods in order that we may derive all of the useful geologic information that is available in a comprehensive lead isotope age study.

Geochimica et Cosmochimica Acta

Invertebrate response to changes in streamflow hydraulics in two urban areas in the United States

Stream hydrology is foundational to aquatic ecosystems and has been shown to be a structuring element for fish and invertebrates. The relations among urbanization, hydraulics, and invertebrate communities were investigated by the U.S. Geological Survey, National Water-Quality Assessment Program by using measures of stream hydraulics in two areas of the United States. Specifically, the hypothesis that the effects of urbanization on streamflow and aquatic biota are transferable across geographic regions was tested. Data from sites in Raleigh, North Carolina, and Milwaukee&ndash;Green Bay, Wisconsin, were compared and indicate that increasing urbanization has an effect on hydraulic characteristics (Reynolds number, shear stress, and stream power for example) in each metropolitan area, though limited commonality of significant correlations was noted between areas. Correspondence of significant correlations between invertebrate and hydraulic metrics between study areas also was limited. The links between urbanization, hydraulics, and invertebrates could be seen only in the Raleigh data. Connections among these three elements in the Milwaukee&ndash;Green Bay data were not clear and likely were obscured by antecedent land cover. Observed biotic differences due to hydrology and urbanization characteristics are not similar between geographic regions.

Scientific Investigations Report