SEARCH · Geology Reports

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

USGS1998

Fluid-deposited graphitic inclusions in quartz: Comparison between KTB (German Continental Deep-Drilling) core samples and artificially reequilibrated natural inclusions

We used Raman microsampling spectroscopy (RMS) to determine the degree of crystallinity of minute (2–15 μm) graphite inclusions in quartz in two sets of samples: experimentally reequilibrated fluid inclusions in a natural quartz grain and biotite-bearing paragneisses from the KTB deep drillhole in SE Germany. Our sequential reequilibration experiments at 725°C on initially pure CO 2 inclusions in a quartz wafer and the J. Krautheim 1993 experiments at 900–1100°C on organic compounds heated in gold or platinum capsules suggest that, at a given temperature, (1) fluid-deposited graphite will have a lower crystallinity than metamorphosed organic matter and (2) that the crystallinity of fluid-deposited graphite is affected by the composition of the fluid from which it was deposited. We determined that the precipitation of more-crystalline graphite is favored by lower f H 2 (higher f O 2 ), and that the crystallinity of graphite is established by the conditions (including gas fugacities) that pertain as the fluid first reaches graphite saturation. Graphite inclusions within quartz grains in the KTB rocks show a wide range in crystallinity index, reflecting three episodes of carbon entrapment under different metamorphic conditions. Isolated graphite inclusions have the spectral properties of totally ordered, completely crystalline graphite. Such crystallinity suggests that the graphite was incorporated from the surrounding metasedimentary rocks, which underwent metamorphism at upper amphibolite-facies conditions. Much of the fluid-deposited graphite in fluid inclusions, however, shows some spectral disorder. The properties of that graphite resemble those of experimental precipitates at temperatures in excess of 700°C and at elevated pressures, suggesting that the inclusions represent precipitates from C-O-H fluids trapped under conditions near those of peak metamorphism at the KTB site. In contrast, graphite that is intimately associated with chlorite and other (presumably low-temperature) silicates in inclusions is highly disordered and spectrally resembles kerogens. This graphite probably was deposited during later greenschist-facies retrograde metamorphism at about 400–500°C. The degree of crystallinity of fluid-deposited graphite is shown to be a much more complex function of temperature than is the crystallinity of metamorphic graphite. To some extent, experiments can provide temperature-calibration of the crystallinity index. However, the difference in time scales between experimental runs and geologic processes makes it difficult to infer specific temperatures for naturally precipitated graphite.

Bohemian Massif↗

USGS2000

Correlation of offshore seismic profiles with onshore New Jersey Miocene sediments

The New Jersey passive continental margin records the interaction of sequences and sea-level, although previous studies linking seismically defined sequences, borehole control, and global ??18O records were hindered by a seismic data gap on the inner-shelf. We describe new seismic data from the innermost New Jersey shelf that tie offshore seismic stratigraphy directly to onshore boreholes. These data link the onshore boreholes to existing seismic grids across the outer margin and to boreholes on the continental slope. Surfaces defined by age; facies, and log signature in the onshore boreholes at the base of sequences Kw2b, Kw2a, Kw1c, and Kw0 are now tied to seismic sequence boundaries m5s, m5.2s, m5.4s, and m6s, respectively, defined beneath the inner shelf. Sequence boundaries recognized in onshore boreholes and inner shelf seismic profiles apparently correlate with reflections m5, m5.2, m5.4, and m6, respectively, that were dated at slope boreholes during ODP Leg 150. We now recognize an additional sequence boundary beneath the shelf that we name m5.5s and correlate to the base of the onshore sequence Kw1b. The new seismic data image prograding Oligocene clinoforms beneath the inner shelf, consistent with the results from onshore boreholes. A land-based seismic profile crossing the Island Beach borehole reveals reflector geometries that we tie to Lower Miocene litho- and bio-facies in this borehole. These land-based seismic profiles image well-defined sequence boundaries, onlap and downlap truncations that correlate to Transgressive Systems Tracts (TST) and Highstand Systems Tracts (HST) identified in boreholes. Preliminary analysis of CH0698 data continues these system tract delineations across the inner shelf The CH0698 seismic profiles tie seismically defined sequence boundaries with sequences identified by lithiologic and paleontologic criteria. Both can now be related to global ??18O increases and attendant glacioeustatic lowerings. This integration of core, log, and seismic character of mid-Tertiary sediments across the width of the New Jersey margin is a major step in the long-standing effort to evaluate the impact of glaciouestasy on siliciclastic sediments of a passive continental margin. (C) 2000 Elsevier Science B.V. All rights reserved.

Conference Paper↗

USGS2000

Lithofacies identification using multiple adaptive resonance theory neural networks and group decision expert system

Lithofacies identification supplies qualitative information about rocks. Lithofacies represent rock textures and are important components of hydrocarbon reservoir description. Traditional techniques of lithofacies identification from core data are costly and different geologists may provide different interpretations. In this paper, we present a low-cost intelligent system consisting of three adaptive resonance theory neural networks and a rule-based expert system to consistently and objectively identify lithofacies from well-log data. The input data are altered into different forms representing different perspectives of observation of lithofacies. Each form of input is processed by a different adaptive resonance theory neural network. Among these three adaptive resonance theory neural networks, one neural network processes the raw continuous data, another processes categorial data, and the third processes fuzzy-set data. Outputs from these three networks are then combined by the expert system using fuzzy inference to determine to which facies the input data should be assigned. Rules are prioritized to emphasize the importance of firing order. This new approach combines the learning ability of neural networks, the adaptability of fuzzy logic, and the expertise of geologists to infer facies of the rocks. This approach is applied to the Appleton Field, an oil field located in Escambia County, Alabama. The hybrid intelligence system predicts lithofacies identity from log data with 87.6% accuracy. This prediction is more accurate than those of single adaptive resonance theory networks, 79.3%, 68.0% and 66.0%, using raw, fuzzy-set, and categorical data, respectively, and by an error-backpropagation neural network, 57.3%. (C) 2000 Published by Elsevier Science Ltd. All rights reserved.

Computers & Geosciences↗

USGS1997

Organic geochemical study of sequences overlying coal seams; example from the Mansfield Formation (Lower Pennsylvanian), Indiana

Roof successions above two coal seams from the Mansfield Formation (Lower Pennsylvanian) in the Indiana portion of the Illinois Basin have been studied with regard to sedimentary structures, organic petrology and organic geochemistry. The succession above the Blue Creek Member of the Mansfield Formation is typical of the lithologies covering low-sulphur coals (< 1%) in the area studied, whereas the succession above the unnamed Mansfield coal is typical of high-sulphur coals (>2.%). The transgressive-regressive packages above both seams reflect the periodic inundation of coastal mires by tidal flats and creeks as inferred from bioturbation and sedimentary structures such as tidal rhythmites and clay-draped ripple bedforms. Geochemistry and petrology of organic facies above the Blue Creek coal suggest that tidal flats formed inland in fresh-water environments. These overlying fresh water sediments prevented saline waters from invading the peat, contributing to low-sulphur content in the coal. Above the unnamed coal, trace fossils and geochemical and petrological characteristics of organic facies suggest more unrestricted seaward depositional environment. The absence of saline or typically marine biomarkers above this coal is interpreted as evidence of very short periods of marine transgression, as there was not enough time for establishment of the precursor organisms for marine biomarkers. However, sufficient time passed to raise SO 4 2− concentration in pore waters, resulting in the formation of authigenic pyrite and sulphur incorparation into organic matter.

International Journal of Coal Geology↗

USGS2015

Enigmatic eight-meter trace fossils in the Lower Pennsylvanian Lee sandstone, central Appalachian basin, Tennessee

Enigmatic tubular trace fossils up to eight meters long occur in the Lower Pennsylvanian Middlesboro Member of the Lee Formation. Two morphotypes occur: type 1 trace fossils are plain, smooth, vertical, nonbranching, parallel-walled, tubular structures; type 2 trace fossils branch, have walls with faint vertical striations, regularly or irregularly spaced nodes, and funnel-shaped terminations. Sandstone casts filling type 2 structures have helical spiral morphology, and, in rare individuals, faint meniscate fills have been observed. Both trace-fossil morphotypes have poorly cemented wall linings containing framboidal pyrite, amorphous carbon, quartz sand, and poorly preserved fecal material. The trace fossils occur in a massive, structureless, channel-form sandstone, originating at the contact between a channel lag and the overlying massive fill. The stratigraphic sequence is interpreted to represent a barrier island transgressing an estuarine facies. A tidal inlet within the barrier facies scoured into the underlying estuarine sediments. Subsequent rapid filling of the inlet led to the deposition of the massive sandstone. Origin of these structures is uncertain. The preponderance of evidence favors the hypothesis that the structures are escape burrows of animals that had colonized, or were concentrated in, the lag and were suddenly buried by the deposition of the massive sand. However, no likely burrower has been identified, and several characteristics of the structures and the enclosing sediments indicate that they may be completely inorganic in origin.

Journal of Paleontology↗

USGS2006

Satellite-derived, melt-season surface temperature of the Greenland Ice Sheet (2000-2005) and its relationship to mass balance

Mean, clear-sky surface temperature of the Greenland Ice Sheet was measured for each melt season from 2000 to 2005 using Moderate-Resolution Imaging Spectroradiometer (MODIS)–derived land-surface temperature (LST) data-product maps. During the period of most-active melt, the mean, clear-sky surface temperature of the ice sheet was highest in 2002 (−8.29 ± 5.29°C) and 2005 (−8.29 ± 5.43°C), compared to a 6-year mean of −9.04 ± 5.59°C, in agreement with recent work by other investigators showing unusually extensive melt in 2002 and 2005. Surface-temperature variability shows a correspondence with the dry-snow facies of the ice sheet; a reduction in area of the dry-snow facies would indicate a more-negative mass balance. Surface-temperature variability generally increased during the study period and is most pronounced in the 2005 melt season; this is consistent with surface instability caused by air-temperature fluctuations.

Geophysical Research Letters↗

USGS2009

Contemporaneous deposition of phyllosilicates and sulfates: Using Australian acidic saline lake deposits to describe geochemical variability on Mars

Studies of the origin of the Martian sulfate and phyllosilicate deposits have led to the hypothesis that there was a marked, global-scale change in the Mars environment from circum-neutral pH aqueous alteration in the Noachian to an acidic evaporitic system in the late Noachian to Hesperian. However, terrestrial studies suggest that two different geochemical systems need not be invoked to explain such geochemical variation.Western Australian acidic playa lakes have large pH differences separated vertically and laterally by only a few tens of meters, demonstrating how highly variable chemistries can coexist over short distances in natural environments. We suggest diverse and variable Martian aqueous environments where the coetaneous formation of phyllosilicates and sulfates at the Australian sites are analogs for regions where phyllosilicates and sulfates coexist on Mars. In these systems, Fe and alkali earth phyllosilicates represent deep facies associated with upwelling neutral to alkaline groundwater, whereas aluminous phyllosilicates and sulfates represent near-surface evaporitic facies formed from more acidic brines. Copyright 2009 by the American Geophysical Union.

Geophysical Research Letters↗

USGS2011

Hydrostratigraphic analysis of the MADE site with full-resolution GPR and direct-push hydraulic profiling

Full‐resolution 3D Ground‐Penetrating Radar (GPR) data were combined with high‐resolution hydraulic conductivity ( K ) data from vertical Direct‐Push (DP) profiles to characterize a portion of the highly heterogeneous MAcro Dispersion Experiment (MADE) site. This is an important first step to better understand the influence of aquifer heterogeneities on observed anomalous transport. Statistical evaluation of DP data indicates non‐normal distributions that have much higher similarity within each GPR facies than between facies. The analysis of GPR and DP data provides high‐resolution estimates of the 3D geometry of hydrostratigraphic zones, which can then be populated with stochastic K fields. The lack of such estimates has been a significant limitation for testing and parameterizing a range of novel transport theories at sites where the traditional advection‐dispersion model has proven inadequate.

Mississippi↗

USGS2018

Kinematic, deformational, and thermochronologic conditions along the Gossan Lead and Fries shear zones: Constraining the western-eastern Blue Ridge boundary in northwestern North Carolina

The fault boundary between the western and eastern Blue Ridge (WBR-EBR) in the southern Appalachians separates Mesoproterozoic basement rocks and their cover from Neoproterozoic to Paleozoic accreted rocks. Several northeast striking faults delineate the boundary, including the Gossan Lead shear zone in northwestern North Carolina. Varying tectonic interpretations of WBR-EBR boundary include a premetamorphic fault, an Acadian dextral strike-slip fault, or an Alleghanian fault. We use field-based, microstructural, and theromochronometric analyses to determine the conditions, kinematics, and timing of deformation, in order to distinguish among competing hypotheses for the Gossan Lead shear zone. This comprehensive approach has allowed us to attribute a number of new and previously observed tectonic fabrics to specific orogenic events; key relationships necessary to the study of multiply deformed tectonic margins. Detailed mapping and microstructural analysis of the Gossan Lead shear zone document a several kilometer-wide mylonitic zone with kinematic indicators that record dominantly top-to-the-NW thrust motion, with local strike-slip and normal sense indicators. Dynamically recrystallized quartz and feldspar constrain a range of deformation conditions from amphibolite to greenschist facies. Two unaltered lineation-forming amphiboles from mylonitic amphibolites record 40 Ar/ 39 Ar cooling ages of 347–345 Ma, and a mylonitized metagraywacke records a muscovite 40 Ar/ 39 Ar cooling age of 336 Ma. These data are consistent with dominantly NW directed thrusting along the Gossan Lead shear zone at amphibolite to greenschist facies conditions, and rapid cooling in the Middle Mississippian. We suggest these data support overprinting and/or reactivation of an earlier structure along this complexly deformed boundary by 336 Ma.

North Carolina↗

USGS2010

Mid‐Cretaceous extensional tectonics of the Yukon‐Tanana Terrane, Trans‐Alaska Crustal Transect (TACT), east‐central Alaska

Mid‐Cretaceous crustal extension played a fundamental role in the structural evolution of the Yukon‐Tanana terrane (YTT) in the northern Cordilleran interior. In the central portion of the YTT northwest of Delta Junction, Alaska, a mylonitic shear zone juxtaposes greenschist facies rocks in the upper plate against middle to upper amphibolite facies metamorphic rocks in the lower plate, a juxtaposition suggesting elimination of as much as 10 km of crustal section. The mylonites form a partial sheath enveloping a domal footwall structure and kinematic analysis of the mylonite zone yields a uniform transport direction of hanging wall to ESE. These relations suggest analogies to the metamorphic core complexes of the southern Cordillera. However, the YTT structures are entirely ductile, suggesting either a relatively deep erosional level or relatively high geothermal gradients during extension. In the study area remnants of an older preextensional thrusting event are preserved at the highest structural levels at the base of the Seventymile terrane and the leading edge of YTT in the Wickersham terrane. However, most areas display a regional, subhorizontal fabric that is superimposed on older fabrics, and in the study area this latest fabric is subparallel to the mylonitic sheath of the apparent extensional structure. Thus the conventional viewpoint that this latest fabric is related to thrusting needs to be reevaluated and this fabric may be entirely extensional in origin. Further evidence for extension is provided by clear similarities between YTT and characteristic features of other extensional terranes. Thus we suggest that the YTT is a deeply eroded view of highly extended continental crust. The tectonic mechanism for the extensional event and the magnitude of the extension is uncertain because of complications in regional timing relationships and in alternative interpretations of the reconstruction of the crustal section. Three end‐member models based on analogies with Neogene extensional systems are presented as working models to accommodate the alternative interpretations: (1) a Jurassic collision and Cretaceous extension model based on comparisons with the Neogene history of the Mediterranean region; (2) an Early to mid‐Cretaceous syncollisional model analogous to the Carpathian Mountains of eastern Europe; and (3) a syncollisional plateau uplift model with extension driven by gravity spreading.

Alaska↗

USGS2010

Structure, metamorphism, and geochronology of the Cosmos Hills and Ruby Ridge, Brooks Range schist belt, Alaska

The boundary of the internal zones of the Brooks Range orogenic belt (the schist belt) is a fault contact that dips toward the hinterland (the Yukon-Koyukuk province). This fault, here referred to as the Cosmos Hills fault zone, juxtaposes oceanic rocks and unmetamorphosed sedimentary rocks structurally above blueschist-to-greenschist facies metamorphic rocks of the schist belt. Near the fault contact, schist belt rocks are increasingly affected by a prominent, subhorizontal transposition foliation that is locally mylonitic in the fault zone. Structural and petrologic observations combined with 40 Ar/ 39 Ar incremental-release geochronology give evidence for a polyphase metamorphic and deformational history beginning in the Middle Jurassic and continuing until the Late Cretaceous. Our 40 Ar/ 39 Ar cooling age for Jurassic metamorphism is consistent with stratigraphic and other evidence for the onset of Brooks Range orogenesis. Jurassic metamorphism is nearly everywhere overprinted by a regional greenschist-facies event dated at 130–125 Ma. Near the contact with the Cosmos Hills fault zone, the schist belt is increasingly affected by a younger greenschist metamorphism that is texturally related to a prominent foliation that folds and transposes an older fabric. The 40 Ar/ 39 Ar results on phengite and fuchsite that define this younger fabric give recrystallization ages ranging from 103 to less than 90 Ma. We conclude that metamorphism that formed the transposition fabric peaked around 100 Ma and may have continued until well after 90 Ma. This age for greenschist metamorphism is broadly synchronous with the depositional age of locally derived, shallow-marine clastic sedimentary strata in the hanging wall of the fault zone and thus substantiates the interpretation that the fault zone accommodated extension in the Late Cretaceous. This extension unroofed and exhumed the schist belt during relative subsidence of the Yukon-Koyukuk province.

Tectonics↗

USGS2012

Rapid extension recorded by cooling‐age patterns and brittle deformation, Naxos, Greece

The metamorphic core complex exposed as the island of Naxos in the Aegean Sea records an unusually complete sequence of structures developed as a result of continental extension. The structures formed during Miocene rise and cooling from ductile, upper amphibolite facies and anatectic conditions to brittle near‐surface conditions beneath the Naxos detachment fault. Top‐to‐the‐north ductile fabrics in the footwall, which initially developed during amphibolite facies prograde metamorphism, were overprinted by a succession of north directed, normal sense lower‐temperature brittle structures as the footwall was tectonically unloaded and unroofed. Pseudotachylite and cataclasite formation, brittle faulting, alteration, and erosion of the footwall occurred during continued slip and tectonic denudation. Neogene conglomerate and megabreccia, in part derived from exhumation of this footwall, lie structurally above the peripheral Naxos fault. Published K‐Ar and 40 Ar/ 39 Ar ages for hornblende, white mica, and biotite in the footwall decrease northwestward; apparent ages 17–50 Ma in the southeast correspond to areas of low metamorphic grade where preextension argon was partially retained. Published ages 16–10 Ma in higher‐grade rocks of the domal core in the north are cooling ages that for each of the three minerals show a component of younging in the NNE direction of extension. Assuming this is the direction of unroofing, we interpret the rate of this younging as the fault slip rate as the footwall rocks moved >20 km SSW relative to their hanging wall along the base of the Naxos detachment fault. The calculated rates of slip average 5–8 mm/yr, comparable to maximum rates reported in the Basin and Range province.

Naxos↗

USGS1998

Paleozoic orogens in New England, USA

Stratigraphy and isotope geochronology in the crystalline core of the Appalachians suggest revised interpretations of the extent, nature and timing of Paleozoic orogens in New England. Five major episodes of magmatism, deformation, and high-grade regional metamorphism are recognized: Taconian (455-442 Ma), Acadian (423-385 Ma), Neo-Acadian (366-350 Ma), Late Pennsylvanian (300-290 Ma) and Alleghanian (280-260 Ma). In the Taconian, the passive margin of Laurentia was subducted below a complex magmatic arc lasting from 480 to 442 Ma, founded in part on continental crust of a Medial New England terrane with possible affinities with Amazonia. Questions about Medial New England involve its coherence as a single plate, and the nature of its underlying crust. The Acadian began in Late Silurian as a collision between the amalgamated Laurentia-Medial New England and outer belts of Composite Avalon along a cryptic suture in coastal Maine, and progressed northwestward to the Connecticut Valley basin by mid-Devonian. Tonalitic-granitic magmatism and up to granulite-facies metamorphism culminated in Early Devonian, possibly tied to lithospheric detachment below the subducting northwestern plate and consequent asthenosphere upwelling. Newly discovered Neo-Acadian Late Devonian to Early Mississippian tonalitic-granitic magmatism, up to granulite-facies metamorphism, and severe deformation in central Massachusetts took place in a plate context poorly understood. Late Pennsylvanian effects include magmatism, metamorphism, and deformation near south New England gneiss domes and the Sebago batholith, and development of the right-lateral Norumbega fault system. Permian Alleghanian effects include penetrative deformation, granitic intrusions and up to sillimanite-grade metamorphism of Pennsylvanian beds in southeastern New England. These last two episodes relate to the arrival of Africa.

GFF↗

USGS1971

Origin and emplacement of the ultramafic rocks of the Emigrant Gap area, California

The ultramafic bodies of the Emigrant Gap area are part of a mafic complex within a large composite pluton of the northern Sierra Nevada. The pluton was magmatically emplaced and is surrounded by an aureole of hornblende-hornfels facies rocks. Inclusions of country rock in ultramafic rock are of pyroxene-hornfels facies and appear to have been partly melted. Gravity studies indicate that the ultramafic bodies have near-vertical contacts extending to depths of at least 1½ to 2½ km. The mafic complex shows rough concentric zoning of rock types: ultramafic bodies occur at the core; gabbro forms a discontinuous intermediate unit; and diorite, tonalite, and granodiorite occur at the margins. Within the ultramafic bodies, unserpentinized wehrlitic peridotite is dominant; dunite and olivine clinopyroxenite are present but greatly subordinate. The ultramafic rocks consist almost entirely of olivine (FO 80 ) and diopside (Ca 46 Mg 46 Fe 8 ); orthopyroxene, hornbolende, and plagioclase occur locally. The gabbro, diorite, tonalite, and granodiorite contain both ortho- and clinopyroxene. Both ultramafic and two-pyroxene-bearing rocks were emplaced nearly simultaneously, as partly crystallized magmas and magmatic crystal mushes that had similar temperature. In all the rocks the structures are dominantly magmatic and were produced by sorting and orientation of crystals by magmatic flow. Structures produced by post-consolidation deformation and replacement are minor and local. The structural and chemical relations within the mafic complex suggest that all the rocks are derived from a single gabbroic magma by crystal fractionation, with the ultramafic rocks formed by mechanical accumulation of early crystallized mafic minerals, and the two pyroxene-bearing granodiorite crystallized from a felsic differentiate. It is likely that flowage differentiation was the dominant process of crystal segregation. The Emigrant Gap mafic complex is similar in structure, rock texture, and mineralogy to zoned ultramafic complexes, such as those of south-eastern Alaska, and is very different from either stratiform or alpine-type bodies. Though unlike the Alaskan bodies in detail, it appears that this complex should be classed with the zoned complexes in any broad grouping of ultramafic occurrences.

California↗

USGS2013

Late Quaternary stratigraphy, sedimentology, and geochemistry of an underfilled lake basin in the Puna (north-west Argentina)

Depositional models of ancient lakes in thin-skinned retroarc foreland basins rarely benefit from appropriate Quaternary analogues. To address this, we present new stratigraphic, sedimentological and geochemical analyses of four radiocarbon-dated sediment cores from the Pozuelos Basin (PB; northwest Argentina) that capture the evolution of this low-accommodation Puna basin over the past ca. 43 cal kyr. Strata from the PB are interpreted as accumulations of a highly variable, underfilled lake system represented by lake-plain/littoral, profundal, palustrine, saline lake and playa facies associations. The vertical stacking of facies is asymmetric, with transgressive and thin organic-rich highstand deposits underlying thicker, organic-poor regressive deposits. The major controls on depositional architecture and basin palaeogeography are tectonics and climate. Accommodation space was derived from piggyback basin-forming flexural subsidence and Miocene-Quaternary normal faulting associated with incorporation of the basin into the Andean hinterland. Sediment and water supply was modulated by variability in the South American summer monsoon, and perennial lake deposits correlate in time with several well-known late Pleistocene wet periods on the Altiplano/Puna plateau. Our results shed new light on lake expansion–contraction dynamics in the PB in particular and provide a deeper understanding of Puna basin lakes in general.

Basin Research↗

USGS2006

Distributary channels, sand lobes, and mesotopography of Navy Submarine Fan, California Borderland, with applications to ancient fan sediments

The deep-tow instrument package of Scripps Institution of Oceanography provides a unique opportunity to delineate small-scale features of a size comparable to those features usually described from ancient deep-sea fan deposits. On Navy Fan, the deep-tow side-scanning sonar readily detected steep channel walls and steps and terraces within channels. The most striking features observed in side-scan are large crescentic depressions commonly occurring in groups. These appear to be large scours or flutes carved by turbidity currents. Four distinct acoustic facies were mapped on the basis of qualitative assessment of reflectivity of 4 kHz reflection profiles. There is a distinct increase in depth of acoustic penetration, number of sub-bottom reflectors, and reflector continuity from the upper fan-valley to the lower fan. These changes are accompanied by a decrease in surface relief. Navy Fan is made up of three active sectors. The active upper fan is dominated by a single channel with prominent levees that decrease in height downstream. The active mid-fan region or suprafan is where sand is deposited. Well defined distributary channels with steps, terraces, and other mesotopography terminate in depositional lobes. Interchannel areas are rough, containing giant scours as well as other relief. The active lower fan accumulates mud and silt and is without resolvable surface morphology. The morphological features seen on Navy Fan other than levees, interchannel areas, and lobes are principally erosional. The distributary channels are up to 0.5 km wide and 5–15 m deep. Such features, because of their large size and low relief, are rarely completely exposed or easily detectable in ancient rock sequences. Some flute-shaped scours are larger than channels in cross section but many are 5-30 m across and 1-2 m deep. If observed in ancient rocks transverse to palaeo-current direction, they would perhaps be indistinguishable from channels. Surface sediment distribution combined with fan morphology can be used to relate modern sediments to facies models for ancient fan sediments. Gravel and sand occur in the upper valley, massive sand beds in the mid-fan distributary channels, classical complete Bouma sequences on depositional lobes, incomplete Bouma sequences (lacking division a) on the lower mid-fan, and Bouma sequence with lenticular shape or other limited extent on mid-fan interchannel areas and on levees.

California↗

USGS2006

Evolution of a trench-slope basin within the Cascadia subduction margin: The Neogene Humboldt Basin, California

The Neogene Humboldt (Eel River) Basin is located along the north-eastern margin of the Pacific Ocean within the Cascadia subduction zone. This sedimentary basin originated near the base of the accretionary prism in post-Eocene time. Subduction processes since that time have elevated strata in the south-eastern portion of the basin above sea level. High-resolution chronostratigraphic data from the onshore portion of the Humboldt Basin enable correlation of time-equivalent lithofacies across the palaeomargin, reconstruction of slope-basin evolution, and preliminary delineation of climatic and tectonic influence on lithological variation. Emergent basin fill is divided into five lithofacies which clearly document shoaling of the inner trench slope from deep-water environments in early Miocene time to paralic environments in Pleistocene time. The oldest strata consist of hemipelagic mudstones and minor debris-flow breccias deposited in a deep-water setting during elevated sea level. These strata are overlain by glauconite-rich, fine-grained turbidites which heralded an increasing influx of terrigenous detritus. Water depths shoaled earlier in the eastern basin area as the palaeoshoreline prograded seaward. Turbidite deposition ceased in the eastern basin area at about 2-2 Ma, whereas 22 km to the west, turbidite deposition continued until about 1-8 Ma. Lithofacies at the western study site change abruptly across a middle Pleistocene unconformity from outer shelf to paralic deposits. In the east, a more complete Pleistocene section records transition from outer to inner shelf, beach and fluvial environments. The Humboldt Basin lithofacies sequence is overprinted by eustatic control of sediment source. Comparison of sediment character with palaeoceanographic conditions indicates dominance of hemipelagic facies during periods of elevated sea level in the middle Miocene and early Pliocene when depocentres were isolated from terrigenous sediment. Glauconite-rich facies were mobilized from an upper slope setting following these periods of elevated sea level and redeposited in a deep-marine environment. Pleistocene shoreline lithofacies display glacio-esutatic control of depositional environment by recording several cycles of nearshore to fluvial progressions. General models of accretionary prism behaviour and trench-slope basin evolution are compatible with the overall coarsening-upward lithofacies sequence filling the Humboldt Basin. Early structural barriers precluded deposition of terrigenous material except from locally derived debris flows; subsequent shoaling and burial of deactivated thrust-folds enabled turbidity flows to reach the basin floor. However, late-stage tectonism apparently controlled the onset of coarse-grained deposition in this sequence. Significant sand-rich turbidite deposition began in the middle Pliocene, synchronous with tectonic uplift of the southern basin margin. Conversely, cessation of turbidite deposition in the eastern basin area in latest Pliocene time was synchronous with growth of anticlinal structures which again blocked widespread dispersal of turbidity flows. This middle Pliocene to Holocene period of crustal shortening is synchronous with continued reduction in spreading rate along the southern Juan de Fuca ridge, and probably reflects partial coupling between the subducting lithosphere and the overlying accretionary prism.

California↗

USGS2005

The effects of sea level and palaeotopography on lithofacies distribution and geometries in heterozoan carbonates, south-eastern Spain

This study utilized three-dimensional exposures to evaluate how sea-level position and palaeotopography control the facies and geometries of heterozoan carbonates. Heterozoan carbonates were deposited on top of a Neogene volcanic substrate characterized by palaeotopographic highs, palaeovalleys, and straits that were formed by subaerial erosion, possibly original volcanic topography, and faults prior to carbonate deposition. The depositional sequence that is the focus of this study (DS1B) consists of 7-10 fining upward cycles that developed in response to relative sea-level fluctuations. A complete cycle has a basal erosion surface overlain by deposits of debrisflows and high-density turbidity currents, which formed during relative sea-level fall. Overlying tractive deposits most likely formed during the lowest relative position of sea level. Overlying these are debrites grading upward to high-density turbidites and low-density turbidites that formed during relative sea-level rise. The tops of the cycles consist of hemipelagic deposits that formed during the highest relative position of sea level. The cycles fine upward because upslope carbonate production decreased as relative sea level rose due to less surface area available for shallow-water carbonate production and partial drowning of substrates. The cycles are dominated by two end-member types of facies associations and stratal geometries that formed in response to fluctuating sea-level position over variable substrate palaeotopography. One end-member is termed 'flank flow cycle' because this type of cycle indicates dominant sediment transport down the flanks of palaeovalleys. Those cycles drape the substrate, have more debrites, high-density turbidites and erosion on palaeovalley flanks, and in general, the lithofacies fine down the palaeovalley flanks into the palaeovalley axes. The second end-member is termed 'axial flow cycle' because it indicates a dominance of sediment transport down the axes of palaeovalleys. Those cycles are characterized by debrites and high-density turbidites in palaeovalley axes, and lap out of strata against the flanks of palaeovalleys. Where and when an axial flow cycle or flank flow cycle developed appears to be related to the intersection of sea level with areas of gentle or steep substrate slopes, during an overall relative rise in sea level. Results from this study provide a model for similar systems that must combine carbonate principles for sediment production, palaeotopographic controls, and physical principles of sediment remobilization into deep water. ?? 2005 International Association of Sedimentologists.

Sedimentology↗