SEARCH · Geology Reports

Results for “Environmental Engineering and Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22Linked to original sources

USGS2000

Accuracy assessment for the U.S. Geological Survey Regional Land-Cover Mapping Program: New York and New Jersey Region

The U.S. Geological Survey, in cooperation with other government and private organizations, is producing a conterminous U.S. land-cover map using Landsat Thematic Mapper 30-meter data for the Federal regions designated by the U.S. Environmental Protection Agency. Accuracy assessment is to be conducted for each Federal region to estimate overall and class-specific accuracies. In Region 2, consisting of New York and New Jersey, the accuracy assessment was completed for 15 land-cover and land-use classes, using interpreted 1:40,000-scale aerial photographs as reference data. The methodology used for Region 2 features a two-stage, geographically stratified approach, with a general sample of all classes (1,033 sample sites), and a separate sample for rare classes (294 sample sites). A confidence index was recorded for each land-cover interpretation on the 1:40,000-scale aerial photography The estimated overall accuracy for Region 2 was 63 percent (standard error 1.4 percent) using all sample sites, and 75.2 percent (standard error 1.5 percent) using only reference sites with a high-confidence index. User's and producer's accuracies for the general sample and user's accuracy for the sample of rare classes, as well as variance for the estimated accuracy parameters, were also reported. Narrowly defined land-use classes and heterogeneous conditions of land cover are the major causes of misclassification errors. Recommendations for modifying the accuracy assessment methodology for use in the other nine Federal regions are provided.

Photogrammetric Engineering and Remote Sensing↗

USGS1996

The Springdale, Utah, landslide: An extraordinary event

The most dramatic geologic effect of the M-5.7 St. George, Utah earthquake of 2 September 1992 was the triggering of the 14,000,000-m3 Springdale, Utah landslide. The roughly 10 m of landslide movement destroyed three houses, threatened several condominiums, disrupted utility lines, and temporarily closed the southwest entrance to Zion National Park. The seismic triggering of this landslide is puzzling because its distance from the earthquake epicenter, 44 km, is much greater than the farthest distance (18 km) at which similar landslides have been triggered in worldwide earthquakes of the same magnitude. Other Colorado Plateau earthquakes also have produced landslides far beyond worldwide distance limits, which suggests that regional variations in ground-shaking attenuation may require different landslide-triggering distance limits for different seismotectonic regions. Slope stability analysis and historical records of landslide movement suggest that the Springdale landslide was only slightly above limit-equilibrium conditions at the time of the earthquake. Dynamic stability analysis using Newmark's permanent-displacement method indicates coseismic landslide displacement of only 1-8 cm; this rather modest displacement probably induced enough deformation in the montmorillonitic clays along the failure surface to reduce shear strength and destabilize the slide, which continued to move for several hours after the earthquake.

Utah↗

USGS2015

Ground-truthing electrical resistivity methods in support of submarine groundwater discharge studies: Examples from Hawaii, Washington, and California

Submarine groundwater discharge (SGD) is an important conduit that links terrestrial and marine environments. SGD conveys both water and water-borne constituents into coastal waters, where these inflows may impact near-shore ecosystem health and sustainability. Multichannel electrical resistivity techniques have proven to be a powerful tool to examine scales and dynamics of SGD and SGD forcings. However, there are uncertainties both in data aquisition and data processing that must be addressed to maximize the effectiveness of this tool in estuarine or marine environments. These issues most often relate to discerning subtle nuances in the flow of electricity through variably saturated media that can also be highly conductive ( i.e., seawater). Three contrasting field sites were examined for this study to assess the effectiveness of electrical resistivity techniques in varying coastal settings by comparing resistivity data to direct salinity and resistivity observations, quantifying changes in lithology and beach geomorphology, and fine-tuning inversion protocols. The three study sites all have substantial (up to 85 cm day −1 ) submarine groundwater discharge rates, but the hydrologic, oceanographic, and geologic characteristics of the sites are all very different. At a site in Pelekane Bay on the Big Island of Hawaii, seasonal flooding introduces very high concentrations of fine to coarse sediment into the bay. Near-shore circulation is limited in Pelekane Bay, so this newly introduced sediment can become deposited in the bay where it accumulates over time. At a site in Hood Canal, a fjord within Puget Sound, Washington, SGD rates can be high because of the large tidal range, abundant recharge, and steep hydrologic gradients. At Younger Lagoon in northern California, the flow of groundwater towards the coast is much more parsimonious, but here marine processes, including recirculated seawater, are important in controlling the flow of material towards the coast. Rigorous ground-truthing at each field site showed that multi-channel electrcial resistivity techniques can reproduce the scales and dynamics of a seepage field when such data are correctly collected, and when the model inversions are tuned to field site characteristics. Such information can provide a unique perspective on the scales and dynamics of exchange processes within a coastal aquifer—information essential to scientists and resource managers alike.

California, Hawaii, Washington↗

USGS1975

Sediments, structural framework, petroleum potential, environmental conditions, and operational considerations of the United States North Atlantic Outer Continental Shelf

The area designated for possible oil and gas lease sale as modified from BLM memorandum 3310 #42 (722) and referred to therein as the North Atlantic Outer Continental Shelf (OCS) contains about 58,300 sq km of shelf beneath water depths of less than 200 m and lies chiefly within the Georges Bank basin. The oldest sediments drilled or dredged on the bordering Continental Slope are sandstone, clay, and silt of Upper Cretaceous age. In Upper Cretaceous exposures, on Marthas Vineyard and nearby New England islands, the predominant lithology appears to be clay. About 125 km northeast of the eastern tip of Georges Bank, the Shell B-93 well penetrated clays and silts of Upper and Lower Cretaceous age above dense Jurassic carbonate rocks which overlie a basement of lower Paleozoic slate, schist, quartzite, and granite. Structurally, the Georges Bank basin is a westerly trending trough which opens to the west-southwest. Post-Paleozoic sediments are more than 8 km thick in parts of the basin. Major structural features appear to be directly related to basement structures. Local anticlines, probably caused by differential compaction over basement flexures and horst blocks or by later uplift along basement faults are reflected principally in Lower Cretaceous and older sediments, though some of these features continue upward to within 0.7 of a second (about 650 m) of the seafloor. Tertiary deposits in the Georges Bank basin are probably up to a kilometre thick and are made up of poorly consolidated sand, silt, and clay. The Cretaceous section is inferred to be up to 3.5 km thick and to be mainly clastics -- shale, siltstone, calcareous shale, changing to limestone in the lowest part of the system. Jurassic rocks in the deepest part of the basin appear to be about 3.6 to 4.0 km thick and probably consist mainly of dense carbonates. Potential source rocks in the Georges Bank basin may include organic-rich Cretaceous shale and carbonaceous Jurassic limestone. By analogy with the Scotian Shelf, Cretaceous sandstones are considered to be potential reservoir rocks. Local zones of porous dolomite are believed to be present in carbonate rocks of Jurassic age and should not be overlooked as potential reservoirs. Structural highs related to draping and differential compaction over basement blocks could be important potential petroleum traps. Additional traps may include reef structures near the shelf edge, updip pinchouts, and stratigraphic traps in both clastic and carbonate sediment. A statistical mean for the undiscovered recoverable petroleum resources is calculated to be 0.9 billion barrels of oil and 4.2 trillion cubic feet of gas. At the 5 percent probability level (1 in 20 chance) the undiscovered recoverable petroleum resources are calculated to be 2.4 billion barrels of oil and 12.5 trillion cubic feet of gas. These undiscovered recoverable petroleum resources are those quantities of oil and gas that may be reasonably expected to exist in favorable settings, but which have not yet been identified by drilling. Such estimates, therefore, carry a high degree of uncertainty. Environmental studies of Georges Bank indicated a low-moderate risk from petroleum development. However, the risk estimate is based on very limited data. Drift bottle returns used to infer oil spill trajectories show about a 2% overall recovery rate. Meteorologic data comes mainly from nearby land areas and from ships attempting to avoid storms. Seismicity on Georges Bank is low. This may reflect, in large part, the difficulty of land-based stations in recording earthquakes far from the coast. Direct data on the engineering properties of shallow buried sediment comes mainly from two Texas Tower surveys of limited areas on Georges Shoal and Nantucket Shoals made in the early 1950's. The 17 holes (most less than 30 m deep) reveal some silty layers below loose sand and much lateral variability in sediment type over short distances. The technology for exploration at the required water depths (20 m - 200 m) is available. Mobil drilling units are in great demand around the world and will have to be brought in from other areas along with skilled manpower. Our highest estimates indicate 50 platforms, 800 producing wells, 1,100 km of pipeline, and 5 onshore terminals may be needed. The time frame for production, using our high estimates (5% probability) for the undiscovered recoverable resources, could include 4-5 years for significant development, 6-7 years until production commences, and 18 years until peak production.

Open-File Report↗

USGS2025

Developing a probabilistic tsunami hazard assessment framework for Pacific sources: USGS Powell Center meeting summary

Multi-organizational principal investigators formed a U.S. Geological Survey (USGS) Powell Center Working Group (WG), Tsunami Source Standardization for Hazards Mitigation in the United States, to develop a comprehensive series of sources capable of generating tsunamis that could impact U.S. state and territory coastal areas using probabilistic tsunami hazard analysis (PTHA). PTHA results are commonly used to provide consistent tsunami hazard information for use in engineering and risk assessment and, to a lesser extent, hazard response planning. Following an initial weeklong planning meeting in April 2018, designed to establish the WG’s scope, a series of weeklong meetings devoted to aspects of tsunami hazards placed emphasis on assessment of various tsunami sources, including subduction zones in Alaska, the Atlantic and Caribbean, Cascadia, and the Pacific Basin, as well as landslides in Alaska, the Atlantic, and the Caribbean. The final meeting in the series discussed tsunami sources from crustal faults. These meetings, each with a regional geographic focus, were designed to incorporate reviews and feedback from subject matter experts (SMEs) in academia, private industry, and federal, state, and local governmental organizations. Incorporating consensus from SMEs is important because the results derived from the tsunami source models will be used to inform the public about potential hazards from tsunamis related to safety concerns. This paper describes the USGS Powell Center meeting in March 2023, devoted specifically to developing a PTHA for tsunami sources in the Pacific Ocean Basin other than the Alaska–Aleutian and Cascadia subduction zones that were addressed during previous WG meetings.

Environmental & Engineering Geoscience↗

USGS2006

Water resources of Carbon County, Wyoming

Carbon County is located in the south-central part of Wyoming and is the third largest county in the State. A study to describe the physical and chemical characteristics of surface-water and ground-water resources in Carbon County was conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer's Office. Evaluations of streamflow and stream-water quality were limited to analyses of historical data and descriptions of previous investigations. Surface-water data were not collected as part of the study. Forty-five ground-water-quality samples were collected as part of the study and the results from an additional 618 historical ground-water-quality samples were reviewed. Available hydrogeologic characteristics for various aquifers in hydrogeologic units throughout the county also are described. Flow characteristics of streams in Carbon County vary substantially depending on regional and local basin char-acteristics and anthropogenic factors. Precipitation in the county is variable with high mountainous areas receiving several times the annual precipitation of basin lowland areas. For this reason, streams with headwaters in mountainous areas generally are perennial, whereas most streams in the county with headwaters in basin lowland areas are ephemeral, flowing only as a result of regional or local rainfall or snowmelt runoff. Flow characteristics of most perennial streams are altered substantially by diversions and regulation. Water-quality characteristics of selected streams in and near Carbon County during water years 1966 through 1986 varied. Concentrations of dissolved constituents and suspended sediment were smallest at sites on streams with headwaters in mountainous areas because of resistant geologic units, large diluting streamflows, and increased vegetative cover compared to sites on streams with headwaters in basin lowlands. Both water-table and artesian conditions occur in aquifers within the county. Shallow ground water is available throughout the county, although much of it is only marginally suitable or is unsuitable for domestic and irrigation uses mainly because of high total dissolved solids (TDS) concentrations. Suitable ground water for livestock use is available in most areas of the county. Ground-water quality tends to deteriorate with increasing distance from recharge areas and with increasing depth below land surface. Ground water from depths greater than a few thousand feet tends to have TDS concentrations that make it moderately saline to briny. In some areas, even shallow ground water is moderately saline. Specific constituents in parts of some aquifers in the county occur in relatively high concentrations when compared to U.S. Environmental Protection Agency drinking-water standards; for example, relatively high concentrations of sulfate, chloride, fluoride, boron, iron, manganese, and radon were found in several aquifers. The estimated mean daily water use in Carbon County in 2000 was about 320 million gallons per day. Water used for irrigation accounted for about 98 percent of this total. About 98 percent of the total water used was supplied by surface water and about 2 percent by ground water. Excluding irrigation, ground water comprised about 78 percent of total water use in Carbon County. Although ground water is used to a much lesser extent than surface water, in many areas of the county it is the only available water source.

Scientific Investigations Report↗

USGS2003

The National Map: from geography to mapping and back again

When the means of production for national base mapping were capital intensive, required large production facilities, and had ill-defined markets, Federal Government mapping agencies were the primary providers of the spatial data needed for economic development, environmental management, and national defense. With desktop geographic information systems now ubiquitous, source data available as a commodity from private industry, and the realization that many complex problems faced by society need far more and different kinds of spatial data for their solutions, national mapping organizations must realign their business strategies to meet growing demand and anticipate the needs of a rapidly changing geographic information environment. The National Map of the United States builds on a sound historic foundation of describing and monitoring the land surface and adds a focused effort to produce improved understanding, modeling, and prediction of land-surface change. These added dimensions bring to bear a broader spectrum of geographic science to address extant and emerging issues. Within the overarching construct of The National Map, the U.S. Geological Survey (USGS) is making a transition from data collector to guarantor of national data completeness; from producing paper maps to supporting an online, seamless, integrated database; and from simply describing the Nation’s landscape to linking these descriptions with increased scientific understanding. Implementing the full spectrum of geographic science addresses a myriad of public policy issues, including land and natural resource management, recreation, urban growth, human health, and emergency planning, response, and recovery. Neither these issues nor the science and technologies needed to deal with them are static. A robust research agenda is needed to understand these changes and realize The National Map vision. Initial successes have been achieved. These accomplishments demonstrate the utility of The National Map to the Nation and give confidence in evolving its future applications.

Photogrammetric Engineering and Remote Sensing↗

USGS2008

Landslide hazard mitigation in North America

Active landslides throughout the states and territories of the United States result in extensive property loss and 25-50 deaths per year. The U.S. Geological Survey (USGS) has a long history of detailed examination of landslides since the work of Howe (1909) in the San Juan Mountains of Colorado. In the last four decades, landslide inventory maps and landslide hazard maps have depicted landslides of different ages, identified fresh landslide scarps, and indicated the direction of landslide movement for different regions of the states of Colorado, California, and Pennsylvania. Probability-based methods improve landslide hazards assessments. Rainstorms, earthquakes, wildfires, and volcanic eruptions can trigger landslides. Improvements in remote sensing of rainfall make it possible to issue landslide advisories and warnings for vulnerable areas. From 1986 to 1995, the USGS issued hazard warnings based on rainfall in the San Francisco Bay area. USGS workers also identified rainfall thresholds triggering landslides in Puerto Rico, Hawaii, Washington, and the Blue Ridge Mountains of central Virginia. Detailed onsite monitoring of landslides near highways in California and Colorado aided transportation officials. The USGS developed a comprehensive, multi-sector, and multi-agency strategy to mitigate landslide hazards nationwide. This study formed the foundation of the National Landslide Hazards Mitigation Strategy. The USGS, in partnership with the U.S. National Weather Service and the State of California, began to develop a real-time warning system for landslides from wildfires in Southern California as a pilot study in 2005.

Environmental & Engineering Geoscience↗

USGS2018

Analysis of groundwater response to tidal fluctuations, Operable Unit 2, Area 8, Naval Base Kitsap, Keyport, Washington

Operable Unit 2, Area 8, at Naval Base Kitsap, Keyport is the site of a former chrome-plating facility that released metals (primarily chromium and cadmium), chlorinated volatile organic compounds, and petroleum compounds into the local environment. To ensure long-term protectiveness, as stipulated in the Fourth Five-Year Review for the site, Naval Facilities Engineering Command Northwest collaborated with the U.S. Environmental Protection Agency, the Washington State Department of Ecology, and the Suquamish Tribe, to collect data to monitor the contamination left in place and to ensure the site does not pose a risk to human health or the environment. To support these efforts, refined information was needed on the interaction of fresh groundwater with seawater in response to the up-to 13-ft tidal fluctuations at this nearshore site adjacent to Port Orchard Bay. The information was analyzed to meet the primary objective of this investigation, which was to determine the optimal time during the semi-diurnal and the neap-spring tidal cycles to sample groundwater for freshwater contaminants in Area 8 monitoring wells. Groundwater levels and specific conductance in five monitoring wells, along with marine water-levels (tidal levels) in Port Orchard Bay, were monitored every 15 minutes during a 3-week duration to determine how nearshore groundwater responds to tidal forcing. Time series data were collected from October 24, 2017, to November 16, 2017, a period that included neap and spring tides. Vertical profiles of specific conductance were also measured once in the screened interval of each well prior to instrument deployment to determine if a freshwater/saltwater interface was present in the well during that particular time. The vertical profiles of specific conductance were measured only one time during an ebbing tide at approximately the top, middle, and bottom of the saturated thickness within the screened interval of each well. The landward-most well, MW8-8, was completely freshwater, while one of the most seaward wells, MW8-9, was completely saline. A distinct saltwater interface was measured in the three other shallow wells (MW8-11, MW8-12, and MW8-14), with the topmost groundwater occurring fresh underlain by higher conductivity water. Lag times between minimum spring-tide level and minimum groundwater levels in wells ranged from about 2 to 4.5 hours in the less-than 20-ft deep wells screened across the water table, and was about 7 hours for the single 48-ft deep well screened below the water table. Those lag times were surprisingly long considering the wells are all located within 200-ft of the shoreline and the local geology is largely coarse-grained glacial outwash deposits. Various manmade subsurface features, such as slurry walls and backfilled excavations, likely influence and confuse the connectivity between seawater and groundwater. The specific-conductance time-series data showed clear evidence of substantial saltwater intrusion into the screened intervals of most shallow wells. Unexpectedly, the intrusion was associated with the neap part of the tidal cycle around November 13–16, when relatively low barometric pressure and high southerly winds led to the highest high and low tides measured during the monitoring period. The data consistently indicated that the groundwater had the lowest specific conductance (was least mixed with seawater) during the prior neap tides around October 30, the same period when the shallow groundwater levels were lowest. Although the specific conductance response is somewhat different between wells, the data do suggest that it is the heights of the actual high-high and low-low tides, regardless of whether or not they occur during the neap or spring part of the cycle, that allows seawater intrusion into the nearshore aquifer at Area 8. With all the data taken into consideration, the optimal time for sampling the shallow monitoring wells at Area 8 would be centered on a 2–5-hour period following the predicted low-low tide during neap tide, with due consideration of local atmospheric pressure and wind conditions that have the potential to generate tides that can be substantially higher than those predicted from lunar-solar tidal forces. The optimal time for sampling the deeper monitoring wells at Area 8 would be during the 6–8-hour period following a predicted low-low tide, also during the neap tide part of the tidal cycle. The specific time window to sample each well following a low tide can be found in table 5. Those periods are when groundwater in the wells is most fresh and least diluted by seawater intrusion. In addition to timing, consideration should be given to collecting undisturbed samples from the top of the screened interval (or top of the water table if below the top of the interval) to best characterize contaminant concentrations in freshwater. A downhole conductivity probe could be used to identify the saltwater interface, above which would be the ideal depth for sampling.

Washington↗

USGS2021

Geologic and hydrogeologic characteristics of the White River Formation, Lance Formation, and Fox Hills Sandstone, northern greater Denver Basin, southeastern Laramie County, Wyoming

In cooperation with the Wyoming State Engineer’s Office, the U.S. Geological Survey studied the geologic and hydrogeologic characteristics of Cenozoic and Upper Cretaceous strata at a location in southeastern Laramie County within the Wyoming part of the Cheyenne Basin, the northern subbasin of the greater Denver Basin. The study aimed to improve understanding of the aquifers/aquifer systems in these strata, motivated in part by declining groundwater levels and interest in exploring future groundwater supplies. Based on detailed geologic characterization using information obtained by drilling and coring a 960-foot-(ft) deep exploratory borehole, and comparisons with previously published descriptions, identified Cenozoic lithostratigraphic units included 40 ft of Quaternary older alluvial fan deposits consisting of an unconsolidated mixture of sand and gravel with lesser quantities of silt and clay in varying proportions and the underlying 407.3-ft-thick White River Formation of late Eocene-Oligocene age consisting largely of mudrocks with sparse thin beds of sandstone, muddy gravel, and conglomeratic mudrocks. Identified Upper Cretaceous lithostratigraphic units included the 351.6-ft-thick Lance Formation, consisting of terrestrial sedimentary rocks including mudrocks (muddy shale and silty and sandy shale, siltstone, claystone, and mudstone) interbedded with much smaller quantities of very fine- to medium-grained muddy and silty sandstone and coal; the 79.6-ft-thick Fox Hills Sandstone, consisting of a transitional marine sequence of muddy or silty sandstone present in five individual beds; and 86.7 ft of the upper transition member of the Pierre Shale, consisting largely of marine sedimentary rocks such as muddy shale. Beds of the upper and lower Fox Hills Sandstone were separated by tongues of the Lance Formation and upper transition member of the Pierre Shale, respectively. The White River hydrogeologic unit, consisting of the entire White River Formation or Group at the study site, did not contain any substantial secondary permeability features in the mudrocks that composed almost all the unit. A monitoring well (BR–1) was completed in the White River aquifer with the well screen open to the only coarse-grained unit (muddy sandstone) that had sufficient thickness and permeability to be considered as an aquifer. Sampling of the well for a broad suite of constituents indicated groundwater generally was of excellent quality except dissolved arsenic was detected at a concentration greater than the U.S. Environmental Protection Agency (EPA) Maximum Contaminant Level, and dissolved sodium was measured at a concentration greater than several EPA Drinking Water Advisory Levels (DWAs) for the constituent. Well development, well purging for groundwater sampling, and calculated aquifer properties indicated the sandstone aquifer screened by monitoring well BR–1 was not very productive. Analysis of the well water-level responses in BR–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response with wellbore-storage effects. Hydraulic properties estimated based on these responses yielded values of hydraulic conductivity ( K , 0.057 foot per day [ft/d]), specific storage ( Ss , 1.6×10 −6 per foot [ft −1 ]) and porosity ( n , 0.43). Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated an upward trend (+1.13 foot per year [ft/yr]) during the period analyzed, September 5, 2014, to September 30, 2017. Lithologic characteristics of the Lance hydrogeologic unit, consisting of the entire Lance Formation at the study site, indicated a potential aquifer in a “sandy” interval in the upper part of the unit. Most of the Lance hydrogeologic unit below the “sandy” interval consisted of various low-permeability lithologies unlikely to yield substantial quantities of water. This lower part of the hydrogeologic unit likely functions as a confining unit separating the underlying Lance-Fox Hills aquifer. A geologic cross section constructed for this study indicated fine-grained sediments composed most of the Lance Formation/hydrogeologic unit not only at the study location, but also throughout southern Laramie County along the line of section and throughout the Wyoming and Colorado parts of the Cheyenne Basin. A monitoring well (LN–1) completed in a sandstone bed in the “sandy” interval of the Lance hydrogeologic unit produced a mean of about 23 gallons per minute (gal/min) during well development, indicating sandstone beds can form moderately productive confined subaquifers in this part of the hydrogeologic unit. Analysis of the well water-level responses in well LN–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties estimated based on these responses yielded values for a lower bounding K of 0.60 ft/d, Ss of 1.6×10 −6 ft −1 , and n of 0.38. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−0.86 ft/yr) during the period analyzed (November 8, 2014, to September 30, 2017). Analyses for a broad suite of constituents in samples from well LN–1 indicated groundwater quality generally was excellent, although dissolved sodium was measured at a concentration greater than two EPA DWA levels for the constituent. Because of the absence of any overlying or intertonguing sandstone beds belonging to the lower/basal part of the Lance Formation, the Lance-Fox Hills aquifer at the study site consisted only of the five sandstone beds of the Fox Hills Sandstone. The cross section constructed for this study illustrated how the Fox Hills Sandstone, and thus, most of the Lance-Fox Hills aquifer, consists of a series of sandstone bodies that overlap (shingle) upward to the east across southern Laramie County. These bodies collectively form a fairly continuous body of sandstone, thus potentially forming an areally extensive aquifer across southern Laramie County, and by extension, throughout most of the formation’s extent in the Wyoming part of the Cheyenne Basin, as is the case in the Colorado part of the basin. A monitoring well (FH–1) completed in part of the thickest sandstone bed of the Lance-Fox Hills aquifer was moderately to highly productive and easily produced 25 to 30 gal/min after development. Substantially larger water production rates likely could be obtained by penetrating the full thickness of this bed and by completing a well open to the other overlying and underlying sandstone beds of the aquifer. Analysis of the water-level responses in well FH–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties computed based on these responses yielded values for a lower bounding estimate for K of 0.26 ft/d, for Ss of 1.0×10 −6 ft −1 , and for n of 0.41. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−1.74 ft/yr) during the period analyzed, December 19, 2014, to September 30, 2017. Sampling of monitoring well FH–1 and two production wells completed in the Fox Hills Sandstone in other parts of Laramie County indicated groundwater quality generally is excellent, although pH exceeded a recommended EPA aesthetic drinking-water standard (Secondary Maximum Contaminant Level) in two of three sampled wells, total dissolved solids concentrations exceeded the Secondary Maximum Contaminant Level in one of the two sampled production wells, and dissolved sodium was measured in all three sampled wells at a concentration greater than two EPA DWA levels for the constituent. The Wyoming Class II agricultural (irrigation) sodium adsorption ratio standard of 8 was exceeded in all three sampled wells, indicating these waters are not suitable for irrigation use. Computed vertical hydraulic gradients indicated a strong potential for downward flow throughout the groundwater system at the study site, including from the low-yielding aquifer in the upper White River Formation/hydrogeologic unit (monitoring well BR–1) to the sandstone subaquifer in the Lance Formation/hydrogeologic unit (monitoring well LN–1), and from the Lance subaquifer (monitoring well LN–1) to the sandstone bed/aquifer that composes much of the Lance-Fox Hills aquifer thickness at the study site (monitoring well FH–1). However, large hydraulic-head differences between wells indicated high resistance to vertical flow attributable to the low vertical hydraulic conductivity of intervening strata, which consisted almost entirely of low-permeability mudrocks. The confined nature of the sandstone aquifers monitored by the various wells coupled with dissimilarities between groundwater-level fluctuations and trends in groundwater levels indicated downward flow through the intervening strata (primarily mudrocks in the various lithostratigraphic/hydrogeologic units) between the examined sets of wells likely was small.

Wyoming↗

USGS2004

Evaluation of multidimensional transport through a field-scale compacted soil liner

A field-scale compacted soil liner was constructed at the University of Illinois at Urbana-Champaign by the U.S. Environmental Protection Agency (USEPA) and Illinois State Geological Survey in 1988 to investigate chemical transport rates through low permeability compacted clay liners (CCLs). Four tracers (bromide and three benzoic acid tracers) were each added to one of four large ring infiltrometers (LRIs) while tritium was added to the pond water (excluding the infiltrometers). Results from the long-term transport of Br - "> Br - from the localized source zone of LRI are presented in this paper. Core samples were taken radially outward from the center of the Br - "> Br - LRI and concentration depth profiles were obtained. Transport properties were evaluated using an axially symmetric transport model. Results indicate that (1) transport was diffusion controlled; (2) transport due to advection was negligible and well within the regulatory limits of k sat ⩽ 1 × 10 - 7 cm / s ; "> k sat ⩽ 1 × 10 − 7 cm / s; (3) diffusion rates in the horizontal and vertical directions were the same; and (4) small positioning errors due to compression during soil sampling did not affect the best fit advection and diffusion values. The best-fit diffusion coefficient for bromide was equal to the molecular diffusion coefficient multiplied by a tortuosity factor of 0.27, which is within 8% of the tortuosity factor (0.25) found in a related study where tritium transport through the same liner was evaluated. This suggests that the governing mechanisms for the transport of tritium and bromide through the CCL were similar. These results are significant because they address transport through a composite liner from a localized source zone which occurs when defects or punctures in the geomembrane of a composite system are present.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2000

Louisiana coastal ecosystem

Louisiana's coast and its degradation and restoration are major environmental issues being studied at the National Wetlands Research Center. Coastal ecosystems are vulnerable because of the tremendous amount of human activity that takes place along the coast. Information on ecological processes is essential to guide the development along the coast as well as to protect and restore wildlife habitat. Louisiana has about 40% of coastal wetlands in the lower 48 states; they support fish, waterfowl, and fur-bearing animals as well as unique cultures like that of the Acadians. The fish and wildlife resources of Louisiana's coast produce over $1 billion each year in revenues. But Louisiana has the highest coastal loss rate because of natural and human causes. Over the past three decades, Louisiana has lost as much as 35-40 mi 2 (90-104 km 2 ) of coastal wetlands a year. The National Wetlands Research Center is qualified to assess and monitor this ecosystem because of its proximity to the study area, a staff chosen for their expertise in the system, and a number of established partnerships with others who study the areas. The Center is often the lead group in partnerships with universities, other federal agencies, and private entities who study this ecosystem. Most of the Center's research and technology development performed for coastal wetlands are done at the Lafayette headquarters; some work is performed at the National Wetlands Research Center's project office in Baton Rouge, LA.

Fact Sheet↗

USGS1972

Preliminary photointerpretation map of landslide and other surficial deposits of the Mount Hamilton quadrangle and parts of the Mount Boardman and San Jose quadrangles, Alameda and Santa Clara Counties, California

The nine San Francisco Bay region counties lie within a geologically active, young, and dynamic part of the central and northern Coast Ranges of California. Significant movements of the earth's crust are occurring here at the present time, posing numerous problems to urbanization, including some of special concern. Geological processes such as fault movements, earthquakes, land subsidence, landsliding, slow downslope movement of bedrock and surficial materials, coastal and stream erosion, flooding, and sedimentation are all potentially hazardous. Because of these factors, an understanding of the operation of physical processes in the bay region is desirable for harmonious, efficient, and safe land-use planning, particularly now, with greatly expanded pressures for urban growth. This map presents preliminary information about one aspect of the physical environment necessary to sound land-use planning--the nature and distribution of surficial deposits. Because surficial deposits are common and well developed in much of the bay region, it is useful to know how and why they have formed, as well as what properties they possess. When maps like this are used in combination with other types of environmental information, such as data on soils, bedrock geology, slopes, vegetation, climatic variation, seismic response, and hydrology, it should be easier to arrive at sound decisions regarding the physical aspects of land use. The U.S. Geological Survey is studying many of these factors in the bay region and hopes to provide the community with much of the required information as part of its San Francisco Bay Region Study in cooperation with the Department of Housing and Urban Development. The representation of surficial deposits on this map reflects the way in which a geologist, working exclusively with aerial photographs, interpreted the origin of various elements of the present landscape. The deposits shown here have not been examined in the field. However, by viewing overlapping vertical aerial photographs through a stereoscope, the geologist sees a three-dimensional relief model of the ground surface and can study and interpret the origins of landforms with considerable ease. In fact, for mapping surficial deposits, particularly in reconnaissance-type studies, photointerpretation has advantages over both ground observations and laboratory studies of surficial materials. Of course, better information can be provided when all aspects of the study are integrated. These preliminary photointerpretation maps are only the first stage in a detailed study of surficial deposits in the bay region, but they should provide land-use planners with immediately useful information about the regional distribution of landslide and other surficial deposits. This map indicates the dominant surficial processes that have probably been operative by showing the distribution of different types of surficial deposits. Processes such as weathering, erosion, sedimentation, and the slow as well as rapid downslope movement of earth materials have constantly reshaped the land surface in the past and will continue to in the future, although at varying rates. The processes are interrelated to varying degrees. For example, crustal uplift of the Coast Ranges will lead to increased erosion and downcutting by streams that in turn generally results in increased deposition of sediments in river valleys, lakes, and shoreline areas. Older flood planes and river deposits may be eroded, leaving elevated terrace deposits. In addition, downcutting by streams may cause adjacent slopes to become unstable, thereby increasing the possibility of slope failures. Man's activities can alter natural physical processes in many ways. Simple acts such as overwatering a lawn or placing a septic tank drainfield in ground that is marginally stable may weaken the bedrock and surficial materials enough to induce landsliding. Relatively stable areas may be made unstable as a result of construction activities that involve cutting or oversteepening of natural slopes. Engineers, builders, conservationists, and others concerned with land use must evaluate the potential effects of all types of development, and maps that show the nature and distribution of surficial deposits should provide much of the basic information they need. This map, then, shows the cumulative effects of various processes that have yielded surficial deposits up to the time the photographs used for photointerpretation were taken. It does not indicate directly areas where processes will be most active, nor does it show the rate at which they will operate. However, knowledge of the history of geologic events is a key to understanding and predicting the evolution of an area, even where man's activities significantly change the character of the land. Almost all new landslides, for example, occur in areas with a history of landslide activity.

California↗

USGS2022

Rockfall kinematics from massive rock cliffs: Outlier boulders and flyrock from Whitney Portal, California, rockfalls

Geologic conditions and topographic setting are among the most critical factors for assessing rockfall hazards. However, other subtle features of rockfall motion may also govern the runout of rockfall debris, particularly for those sourced from massive cliffs where debris can have substantial momentum during transport. Rocks may undergo collisions with trees and talus boulders, with the latter potentially generating flyrock—launched rock pieces resulting from boulder collisions that follow distinctively different paths than the majority of debris. Collectively, these intricacies of rockfall kinematics may substantially govern the hazards expected from rockfall to both persons and infrastructure located beneath steep cliffs. Here, we investigate the kinematics, including outlier boulder and flyrock trajectories, of seismically triggered rockfalls on 24 June 2020 that damaged campground facilities near Whitney Portal, CA, a heavily used outdoor recreation gateway to the Sierra Nevada mountains. Our results, obtained in part by rockfall runout model simulations, indicate that outlier boulder trajectories resulted from opportunities provided by less steep terrain beyond the talus edge. The influence of trees, initially thought to have served a protective capacity in attenuating rockfall energy, appears to have been negligible for the large boulder volumes (>50 m 3 ) mobilized, although they did potentially deflect the trajectory of flyrock debris. Rockfall outlier boulders from the event were comparable in volume and runout distance to prehistoric boulders located beyond the talus slope, thereby providing some level of confidence in the use of a single rockfall shadow angle for estimating future rockfall hazards at the site.

California↗

USGS2007

U.S. Geological Survey Activities Related to American Indians and Alaska Natives: Fiscal Year 2005

Introduction This report describes the activities that the U.S. Geological Survey (USGS) conducted with American Indian and Alaska Native governments, educational institutions, and individuals during Federal fiscal year (FY) 2005. Most of these USGS activities were collaborations with Tribes, Tribal organizations, or professional societies. Others were conducted cooperatively with the Bureau of Indian Affairs (BIA) or other Federal entities. The USGS is the earth and natural science bureau within the U.S. Department of the Interior (DOI). The USGS does not have regulatory or land management responsibilities. As described in this report, there are many USGS activities that are directly relevant to American Indians, Alaska Natives, and to Native lands. A USGS website, dedicated to making USGS more accessible to American Indians, Alaska Natives, their governments, and institutions, is available at www.usgs.gov/indian. This website includes information on how to contact USGS American Indian/Alaska Native Liaisons, training opportunities, and links to other information resources. This report and previous editions are also available through the website. The USGS realizes that Native knowledge and cultural traditions of living in harmony with nature result in unique Native perspectives that enrich USGS studies. USGS seeks to increase the sensitivity and openness of its scientists to the breadth of Native knowledge, expanding the information on which their research is based. USGS scientific studies include data collection, mapping, natural resource modeling, and research projects. These projects typically last 2 or 3 years, although some are parts of longer-term activities. Some projects are funded cooperatively, with USGS funds matched or supplemented by individual Tribal governments, or by the BIA. These projects may also receive funding from the U.S. Environmental Protection Agency (USEPA), the Indian Health Service (part of the Department of Health and Human Services), or other Federal agencies. The USGS routinely works with its sister bureaus in the Department of the Interior to provide the scientific information and expertise needed to meet the Department's science priorities. Some USGS activities described in this report are conducted as collateral tasks that result from USGS employees identifying and responding to perceived needs. These endeavors are usually prompted by employee interests and frequently involve educational activities. The education is often a reciprocal learning and teaching experience for USGS employees and for Native participants. Through these activities, USGS employees help to fulfill a mission of the USGS - to demonstrate scientific relevance - while helping their fellow citizens. Increasingly, some of the educational activities are becoming parts of formal USGS projects. USGS employees also take initiative in assisting American Indians and Alaska Natives by participating in several organizations that promote awareness of science career opportunities among Native peoples and help build support and communication networks. One such group is the American Indian Science and Engineering Society (AISES). USGS employees join this organization on a voluntary basis, bringing the benefits of this expanded network to the USGS, as many employees do with other professional organizations. The studies briefly described in this report span subsistence issues, wildlife health, water quality, mineral resources, monitoring and modeling to gather information and predict what may happen in the future. Although each project description relates to Native Americans in some way, the projects vary widely, including who conducted the work, the goals and products, the duration of the study, and whether it was local or covered a broad area. Each major organizational unit of the USGS has identified an American Indian/Alaska Native liaison. The USGS has a regional organizational structure, with Western, Central,

Circular↗

USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

USGS2000

Interim report on the scientific investigations in the Animas River watershed, Colorado to facilitate remediation decisions by the U.S. Bureau of Land Management and the U.S. Forest Service, March 29, 2000 meeting, Denver, Colo.

INTRODUCTION The joint U.S. Department of the Interior and U.S. Department of Agriculture Abandoned Mine Lands Initiative (AMLI) was developed as a collaborative effort between the Federal land management agencies (FLMA, that is the U.S. Bureau of Land Management and the U.S. Forest Service) and the U.S. Geological Survey (USGS) in 1996. The stated goal of the AML Initiative was to develop a strategy for gathering and communicating the scientific information needed to develop effective and cost-efficient remediation of abandoned mines within the framework of a watershed. Four primary objectives of the AMLI are to: 1. Provide the scientific information needed (in the short-term) by the FLMAs to make decisions related to the design and implementation of cleanup actions, 2. Develop a multi-disciplined, multi-division approach that integrates geologic, hydrologic, geochemical and ecological information into a knowledge base for sound decision making, 3. Transfer technologies developed within the scientific programs of the USGS to the field and demonstrate their suitability to solve real, practical problems, and 4. Establish working relationships among involved members of land management and regulatory agencies within the framework of a watershed approach to the cleanup of abandoned mines. Long-term process-based research, including development of analytical tools, is recognized as being critical to the long-term success in remediating watersheds impacted by historical mining activities (AML 5-year plan, http://amli.usgs.gov/amli). In a meeting of Federal agencies (U.S. Bureau of Land Management [BLM], U.S. Bureau of Reclamation [BOR], U.S. National Park Service [NPS], U.S. Forest Service [USFS], the U.S. Environmental Protection Agency [EPA], the U.S. Fish and Wildlife Service [F&WS]), and State agencies (Colorado Division of Public Health and Environment, Colorado Division of Mines and Geology), several watersheds were examined within the state whose water quality was presumed to be impacted by historical mining activities. The Animas River watershed (fig. 1) was selected by the State and Federal agencies as one of two watersheds in the U.S. to be studied in detail by the USGS in the AML Initiative. Beginning in October 1997, each of the four Divisions of the USGS (Water Resources, Geologic, Biological Resources, and National Mapping) initiated a collaborative integrated science study of the watershed. Funds were provided from USGS base funding to each of the four Divisions in response to the priorities set by Congressional action and within the flexibility provided by the budgetary framework funding individual research programs. The AML Initiative provides for a five-year focused scientific effort in the two watersheds with final synthesis of the scientific results from each to be published in 2001. Publications are released on the AML web site on a regular basis (http://amli.usgs.gov/amli). On March 29, 2000, the USGS hosted a meeting for the BLM and USFS to discuss remediation options that were under consideration for the summer of 2000. The purpose of this report is to provide an overview of the scientific rational provided by the USGS to meet objective one above, and to summarize our preliminary interpretations of our data. Additional information from sites on private lands have been collected by the State of Colorado, EPA, and the ARSG. Unfortunately, these data have not been fully supplied to the USGS so our conclusions are based only upon our data. These interpretations provide science-based constraints on possible remediation options to be considered by the FLMA, the State, and local property owners in the Animas River watershed. The report is presented in outline format to facilitate discussion of remediation options at the March 29, 2000 meeting. Not all historical mining sites within the watershed are on public lands. This should not be construed to be a final report of the USGS

Denver↗

USGS2004

Water resources of Sweetwater County, Wyoming

Sweetwater County is located in the southwestern part of Wyoming and is the largest county in the State. A study to quantify the availability and describe the chemical quality of surface-water and ground-water resources in Sweetwater County was conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer’s Office. Most of the county has an arid climate. For this reason a large amount of the flow in perennial streams within the county is derived from outside the county. Likewise, much of the ground-water recharge to aquifers within the county is from flows into the county, and occurs slowly. Surface-water data were not collected as part of the study. Evaluations of streamflow and stream-water quality were limited to analyses of historical data and descriptions of previous investigations. Forty-six new ground-water-quality samples were collected as part of the study and the results from an additional 782 historical ground-water-quality samples were reviewed. Available hydrogeologic characteristics for various aquifers throughout the county also are described. Flow characteristics of streams in Sweetwater County vary substantially depending on regional and local basin characteristics and anthropogenic factors. Because precipitation amounts in the county are small, most streams in the county are ephemeral, flowing only as a result of regional or local rainfall or snowmelt runoff. Flows in perennial streams in the county generally are a result of snowmelt runoff in the mountainous headwater areas to the north, west, and south of the county. Flow characteristics of most perennial streams are altered substantially by diversions and regulation. Water-quality characteristics of selected streams in and near Sweetwater County during water years 1974 through 1983 were variable. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were smallest at sites on the Green River because of resistant geologic units, increased vegetative cover, large diluting streamflows, and large reservoirs. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were largest at sites in the Big Sandy River and Bitter Creek Basins. Some nutrient concentrations and bacteria counts exceeded various State and Federal water-quality criteria. Historical and recent anthropogenic activities contributed to natural sources of many dissolved constituents and suspended sediment. Both water-table and artesian conditions occur in aquifers within the county. Shallow ground water is available throughout the county, although much of it is only marginally suitable or is unsuitable for domestic and irrigation uses mainly because of high total dissolved solids (TDS) concentrations. Suitable ground water for livestock use can be found in most areas of the county. Ground-water quality tends to deteriorate with increasing distance from recharge areas and with increasing depth below land surface. Ground water from depths of greater than a few thousand feet tends to have TDS concentrations that make it moderately saline to briny. In some areas even shallow ground water has moderately saline TDS concentrations. Specific constituents in parts of some aquifers in the county occur in relatively high concentrations when compared to U.S. Environmental Protection Agency drinking-water standards. Relatively high concentrations of sulfate, fluoride, boron, iron, and manganese were found in several aquifers. Many ground-water samples from the Battle Spring aquifer in the Great Divide Structural Basin had high radionuclide concentrations. The estimated mean daily water use in Sweetwater County in 2000 was 170.73 million gallons per day. Irrigation was the largest single use of water in the county with an estimated mean use of more than 92 million gallons per day. Surface water irrigation accounted for nearly 90 percent of the total irrigation water used in 2000. Although ground water is used to a much lesser extent than surface water, in many areas of the county it is the only source of water available.

Wyoming↗