Geology ReportsSearch

SEARCH · Geology Reports

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,642 records · Page 22Linked to original sources

Validating antler- and movement-based estimates of caribou reproduction using video camera collars

Wildlife agencies invest substantial resources in monitoring ungulate reproductive rates given ongoing concerns about population trends and their implications for management. For barren-ground caribou ( Rangifer tarandus ) in the North American Arctic, data on parturition and neonate survival have traditionally been collected using visual observations of antler retention and calf presence from small, fixed-wing aircraft. However, these surveys are weather-dependent, expensive, and dangerous, motivating the development of movement-based approaches that infer reproductive events from global positioning system (GPS) location data. We had the unique opportunity to use video camera collars to validate both antler- and movement-based methods for estimating reproduction in barren-ground caribou, using data from the Porcupine (2018–2023) and Western Arctic (2021, 2023) herds in Alaska, USA, and Yukon, Canada. For the movement-based approaches, we assessed individual-based and population-based methods, which both inferred parturition following a sharp decline in movement and inferred calf loss following a sharp increase in movement. We investigated these approaches using rarified 1-, 2-, 4-, and 8-hour fix intervals. Based on video collar observations, we found that antler retention at the onset of the calving period was highly accurate for predicting parturition (96% accuracy) but became unreliable as calving progressed, as approximately 80% of parturient females shed their antlers during the calving period. In contrast, both movement methods performed marginally for estimating caribou parturition (~70% accuracy), with estimates from the individual-based method exhibiting greater bias than those from the population-based method. The individual-based method also poorly predicted neonate survival (≤49% accuracy for detecting parturition and calf fate for the Porcupine Herd). Video data revealed that inaccuracies with the movement methods often occurred when caribou bedded during storms, rested after traversing mountainous terrain, lost a calf shortly after birth, or increased movement to evade insects. These results have important implications for management agencies using antler- and movement-based methods to estimate caribou reproduction, particularly when informing assessments of population decline or recovery. Our results demonstrate the utility of video collar data for validating reproductive monitoring approaches and provide insights into how these approaches can be improved.

Alaska, Yukon

Stream nitrate dynamics driven primarily by discharge and watershed physical and soil characteristics at intensively monitored sites: Insights from deep learning

We developed a suite of models using deep learning to make hindcast predictions of the 7‐day average backward‐looking nitrate concentration at 46 predominantly agricultural sites across the midwestern and eastern United States. The models used daily observations of discharge and meteorological variables and watershed attributes describing anthropogenic modification to hydrology, nitrogen application, climate, groundwater, land use, watershed physiographic attributes, and soils. Across all sites, discharge and watershed soil and physiographic attributes showed a strong influence on model performance. Analysis of drivers across sites revealed considerable regional differences related to controlling processes such as groundwater contributions. We tested several ways to pool data across sites to develop accurate models and make the most effective use of available data. Single‐site models, in which models are trained and tested at a single location, showed generally strong predictive performance (median Kling‐Gupta Efficiency = 0.66), and accuracy at poorly performing sites could be improved by grouping sites with similar characteristics. Developing a single model for all sites reduced performance at several locations with distinct characteristics, suggesting that there is a threshold of dissimilarity beyond which more data does not improve the model. While many deep learning studies have shown that national or even global models can outperform local models, it is not clear that this is true for water quality constituents. This study demonstrates how data can be combined effectively, using deep learning to develop accurate and interpretable models of instream nitrate at sites where varying processes are responsible for changes in nitrate concentration.

Water Resources Research

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi

Is satellite-derived bathymetry vertical accuracy dependent on satellite mission and processing method?

This research focusses on three satellite-derived bathymetry methods and optical satellite instruments: (1) a stereo photogrammetry bathymetry module (SaTSeaD) developed for the NASA Ames stereo pipeline open-source software (version 3.6.0) using stereo WorldView data; (2) physics-based radiative transfer equations (PBSDB) using Landsat data; and (3) a modified composite band-ratio method for Sentinel-2 (SatBathy) with an initial simplified calibration, followed by a more rigorous linear regression against in situ bathymetry data. All methods were tested in three different areas with different geological and environmental conditions, Cabo Rojo, Puerto Rico; Key West, Florida; and Cocos Lagoon and Achang Flat Reef Preserve, Guam. It is demonstrated that all satellite derived bathymetry (SDB) methods have increased accuracy when the results are aligned with higher-accuracy ICESat-2 ATL24 track bathymetry data using the iterative closest point (ICP). SDB vertical accuracy depends more on location characteristics than the method or optical satellite instrument used. All error metrics considered (mean absolute error, median absolute deviation, and root mean square error) can be less than 5% of the maximum bathymetry depth penetration for at least one method, although not necessarily for the same method for all sites. The SDB error distribution tends to be bimodal irrespective of method, satellite instrument, alignment, site, or maximum bathymetry depth, leading to the potential ineffectiveness of traditional error metrics, such as the root mean square error. However, our analysis demonstrates that performing detrending where possible can achieve an error distribution as close to normality as possible for which error metrics are more diagnostic.

Florida

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho

Triggering the 2022 eruption of Mauna Loa

Distinguishing periods of intermittent unrest from the run-up to eruption is a major challenge at volcanoes around the globe. Comparing multidisciplinary monitoring data with mineral chemistry that records the physical and spatio-temporal evolution of magmas fundamentally advances our ability to forecast eruptions. The recent eruption of Mauna Loa, Earth’s largest active volcano, provides a unique opportunity to differentiate unrest from run-up and improve forecasting of future eruptions. After decades of intermittent seismic and geodetic activity over 38 years of repose, Mauna Loa began erupting on 27 November 2022. Here we present a multidisciplinary synthesis that tracks the spatio-temporal evolution of precursory activity by integrating mineral and melt chemistry, fluid inclusion barometry, numerical modeling of mineral zoning, syn-eruptive gas plume measurements, the distribution and frequency of earthquake hypocenters, seismic velocity changes, and ground deformation. These diverse data indicate that the eruption occurred following a 2-month period of sustained magma intrusion from depths of 3–5 km up to 1–2 km beneath the summit caldera, providing a new model of the plumbing system at this very high threat volcano. Careful correlation of both the geochemistry and instrumental monitoring data improves our ability to distinguish unrest from the run-up to eruption by providing deeper understanding of the both the monitoring data and the magmatic system—an approach that could be applied at other volcanic systems worldwide.

Hawaii

Groundwater budget for the Mountain Home area, southern Idaho, 2022–23

The U.S. Geological Survey, with funding from the Idaho Department of Water Resources, developed a groundwater budget for the Mountain Home area in southern Idaho for irrigation year 2023 (November 1, 2022–October 31, 2023). This study focused on the water balance across the Cinder Cone Butte Critical Groundwater Area (CGWA), Mountain Home Groundwater Management Area (GWMA), and the rest of the study area (RoSA), compiling data from various sources, including precipitation records, groundwater level measurements, metered groundwater pumpage data, surface water diversions and evapotranspiration (ET) estimates derived from remote sensing satellite imagery, and ground-based reference data. Key inflow components included recharge from applied surface water irrigation (which incorporates incidental recharge from irrigation practices and conveyance losses), estimated tributary streamflow, and estimated mountain block recharge. The key outflow components were groundwater pumpage for irrigation, municipal, industrial, and domestic uses, and ET. Recharge from applied irrigation and mountain block recharge were the largest inflows, and groundwater pumpage for irrigation was the largest outflow. The CGWA had a positive groundwater budget residual of 2,170 acre-feet (acre-ft), which contrasts with observed long-term groundwater level declines and historical trends of storage depletion. This positive residual is likely associated with unquantified outflows, including lateral groundwater flow out of the subregion, or other complexities, such as overestimated tributary contributions relative to the actual recharge for the 2023 water budget. The GWMA exhibited a positive residual of 56,563 acre-ft, primarily owing to recharge from applied surface water irrigation and areal recharge during a wetter-than-average year, which allowed irrigation entities to deliver more water from in-basin and out-of-basin reservoirs. The RoSA showed a large positive residual of 124,933 acre-ft. The interpretation of these positive residuals must account for significant uncertainties, including estimations of areal recharge, tributary streamflow (particularly losses and diversions), ET, the volume of surface water loss to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and the unquantified groundwater discharge to the Snake River. These uncertainties, in combination with the complex hydrogeologic controls on water movement and limitations of remotely sensed data, directly affect the accuracy of water availability assessments. Future data collection efforts would help reduce these uncertainties and support water resource management decisions in the Mountain Home area. Key efforts could include installing additional streamflow gaging stations (particularly to quantify tributary losses and gains and surface water losses to the Snake River), improving groundwater pumpage metering, and validating remotely sensed ET data with ground-based measurements. Furthermore, to better quantify unrepresented or highly uncertain fluxes, focused investigations on groundwater discharge to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and a more robust determination of the actual influence and volume of mountain block recharge would help refine future water availability assessments for the Mountain Home area.

Idaho

Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

Scientific Investigations Report

Use of a ground-penetrating radar system to detect pre- and post-flood scour at selected bridge sites in New Hampshire, 1996-98

Ground-penetrating radar was used to measure the depth and extent of existing and infilled scour holes and previous scour surfaces at seven bridges in New Hampshire from April 1996 to November 1998. Ground-penetrating-radar survey techniques initially were used by the U.S. Geological Survey to study streambed scour at 30 bridges. Sixteen of the 30 bridges were re-surveyed where floods exceeded a 2-year recurrence interval. A 300-megahertz signal was used in the ground-penetrating radar system that penetrated through depths as great as 20 feet of water and as great as 32 feet of streambed materials. Existing scour-hole dimensions, infilled thickness, previous scour surfaces, and streambed materials were detected using ground-penetrating radar. Depths to riprap materials and pier footings were identified and verified with bridge plans. Post data-collection-processing techniques were applied to assist in the interpretation of the data, and the processed data were displayed and printed as line plots. Processing included distance normalization, migration, and filtering but processing was kept to a minimum and some interference from multiple reflections was left in the record. Of the 16 post-flood bridges, 22 ground-penetrating-radar cross sections at 7 bridges were compared and presented in this report. Existing scour holes were detected during 1996 (pre-flood) data collection in nine cross sections where scour depths ranged from 1 to 3 feet. New scour holes were detected during 1998 (post-flood) data collection in four cross sections where scour depths were as great as 4 feet deep. Infilled scour holes were detected in seven cross sections, where depths of infilling ranged from less than 1 to 4 feet. Depth of infilling by means of steel rod and hammer was difficult to verify in the field because of cobble and boulder streambeds or deep water. Previous scour surfaces in streambed materials were identified in 15 cross sections and the depths to these surfaces ranged from 1 to 10 feet below the streambed. Riprap materials or pier footings were identified in all cross sections. Calculated record depths generally agree with bridge plans. Pier footings were exposed at two bridges and steel pile was exposed at one bridge. Exposures were verified by field observations.

New Hampshire

Evaluation of models for estimating hydraulic conductivity in glacial aquifers from NMR logging

Nuclear magnetic resonance (NMR) logging is a promising method for estimating hydraulic conductivity ( K ). During the past ∼60 years, NMR logging has been used for petroleum applications, and different models have been developed for deriving estimates of permeability. These models involve calibration parameters whose values were determined through decades of research on sandstones and carbonates. We assessed the use of five models to derive estimates of K in glacial aquifers from NMR logging data acquired in two wells at each of two field sites in central Wisconsin, USA. Measurements of K , obtained with a direct push permeameter (DPP), K DPP , were used to obtain the calibration parameters in the Schlumberger-Doll Research, Seevers, Timur-Coates, Kozeny-Godefroy, and sum-of-echoes (SOE) models so as to predict K from the NMR data; and were also used to assess the ability of the models to predict K DPP . We obtained four well-scale calibration parameter values for each model using the NMR and DPP measurements in each well; and one study-scale parameter value for each model by using all data. The SOE model achieved an agreement with K DPP that matched or exceeded that of the other models. The Timur-Coates estimates of K were found to be substantially different from K DPP . Although the well-scale parameter values for the Schlumberger-Doll, Seevers, and SOE models were found to vary by less than a factor of 2, more research is needed to confirm their general applicability so that site-specific calibration is not required to obtain accurate estimates of K from NMR logging data.

Wisconsin

An inset groundwater-flow model to evaluate the effects of layering configuration on model calibration and assess managed aquifer recharge near Shellmound, Mississippi

The U.S. Geological Survey has developed a high-resolution inset groundwater-flow model in the Mississippi Delta as part of an interdisciplinary collaboration coordinated by the Mississippi Alluvial Plain project to provide a tool that stakeholders can use to support water-resource management decisions. Groundwater withdrawals from the Mississippi River Valley alluvial (MRVA) aquifer have been vital to support agricultural production in the region, but substantial groundwater-level declines near Shellmound, Mississippi, have caused concerns for long-term sustainability of the aquifer. To better understand the subsurface and try to mitigate the long-term groundwater-level declines, stakeholders have undertaken actions including a Groundwater Transfer and Injection Pilot (GTIP) project using a riverbank filtration-based managed aquifer recharge approach. The pilot project consisted of extracting groundwater near the Tallahatchie River and reinjecting it into the aquifer 3 kilometers west where water levels have substantially declined. A high-resolution airborne electromagnetic (AEM) survey was also completed to collect electrical resistivity data to support the GTIP project and the development of the groundwater model. The inset groundwater-flow model was developed to (1) integrate the AEM data into the optimal layering configuration of the MRVA aquifer that the available observation data can support through calibration, and (2) assess the potential effect of the GTIP project on the groundwater levels. The AEM data were processed into three different layering configurations leading to the development of model A (18 layers), model B (16 layers), and model C (8 layers), all at a 100- x 100-meter cell spatial resolution using the U.S. Geological Survey modular finite-difference flow model 6 code with Newton-Raphson formulation. The model development process integrated recent advances in modeling, such as the incorporation of AEM data, the use of outputs from the soil-water-balance (SWB) model, and the Aquaculture and Irrigation Water-Use Model, and was facilitated by robust automation using the open-source python packages Modflow-setup and SFRmaker. Using Parameter Estimation ++ Iterative Ensemble Smoother, the three numerical groundwater-flow models (models A, B, and C) were calibrated against a set of observations, which included aquifer groundwater levels, streamflows, stream stage, and aquifer transmissivity. Results indicate that the detailed representation of MRVA aquifer layers in model A produced the best calibrated model by history matching, and the integration of data representing surficial connectivity played a key role in improving groundwater recharge and enhancing the ability of the model to match groundwater levels in the cone of depression. A forecast model simulated the managed aquifer recharge approach, and the results indicated that, given average irrigation and recharge conditions (2010–15), the GTIP project has the potential to induce groundwater-level increases of as much as 3 meters around the injection site, but a sustained increase would require repetition in subsequent years of water transfer at 2022 rates or above.

Mississippi

GST-1: A high-resolution global sediment thickness model

Global Sediment Thickness 1 (GST-1) is a high-resolution sedimentary thickness model calculated on a 0.125° x 0.125° grid. It modifies the sediment thickness of the 1° x 1° Earth Crustal Model 1 (ECM1) by means of 3D inversions of free air gravity anomalies. GST-1 is calculated by performing structural inversions on high-density contrasts across two crustal boundaries: the sediment – basement interface and the crystalline crust – upper mantle interface. The inversions are calculated in each of ten overlapping 3D models that span the globe. These ten models are merged to obtain the GST-1 global model, providing an eight-fold increase in lateral spatial resolution in comparison with ECM1 and CRUST 1.0. Our sediment thickness model exploits the nearly continuous sampling of gravity data when compared to the irregular, sparse sampling of seismic refraction data. Sediment thickness values in GST-1 are in excellent agreement with independently derived cross sections from well-studied sedimentary basins, and within expected resolution limits of seismic refraction data. GST-1 offers a robust, high resolution global model of sedimentary thickness to support studies of sedimentary basins.

Tectonophysics

Twentieth century extreme precipitation detected in a high-resolution, coastal lake-sediment record from California

California faces increasing economic and societal risks from extreme precipitation and flooding associated with atmospheric rivers (ARs) under projected twenty-first century climate warming. Lake sediments can retain signals of past extreme precipitation events, allowing reconstructions beyond the period of instrumental records. Here, we calibrate AR-related extreme precipitation from the last century to proxy data from lake sediments collected in the latitudinal zone of the highest frequency landfall for modern ARs in California. Excursions in erosional proxy data (Ti/Al) are positively and significantly correlated (r median = 0.45, p median = 0.04) with modern records of integrated vapor transport (IVT, kg m −1 s −1 ), a key metric of AR intensity, using correlations that incorporate age-model uncertainty. Despite the land-use change near the study site, the data suggest intense and long-lasting AR storms are identifiable in this sedimentary record. These results allow conservative inferences concerning past extreme hydrology at this site.

California

U.S. Geological Survey Groundwater Climate Response Network, 2024

As of October 2024, the U.S. Geological Survey (USGS) operated 588 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells selected to monitor the effects of climate variability, such as droughts, on groundwater levels nationwide. The CRN includes nearly 500 locations with real-time data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper

Airborne geophysics for geologic mapping of critical mineral systems in the United States southern midcontinent

The increased demand for clean energy technology and a significant reliance on foreign supply chains have given impetus to understanding critical mineral systems and locating potential resources within the United States. At least thirteen critical mineral-bearing systems have been identified throughout the U.S. southern Midcontinent (Hofstra and Kreiner, 2020) but much of the region’s geologic framework is concealed by vegetation and sedimentary cover that hinder traditional geologic mapping efforts. Airborne geophysical data provide an effective way to overcome these obstacles and to provide additional insight into the deeper structures that underlie shallow mineralization. However, legacy airborne magnetic and radiometric data were collected using now-outdated instruments and methods, inconsistent survey parameters, and large flight-line spacings resulting in low-resolution data that present challenges to regional-scale study and interpretation. Over the last decade, the U.S. Geological Survey Earth Mapping Resources Initiative (EMRI) and National Cooperative Geologic Mapping Program have conducted a series of high-resolution airborne magnetic and radiometric surveys across the southern Midcontinent (Fig. 1) as part of an effort to improve understanding of the geophysical framework and natural resource potential in the region. These surveys are designed using modern survey methods and instruments with consistent parameters for flight-line spacing and flight height relative to magnetic sources. The EMRI airborne surveys are planned in collaboration with State geological surveys based on focus areas (Dicken et al., 2022) according to the presence of or potential for critical mineral deposits. High-resolution airborne magnetic and radiometric data cover focus areas such as the southeast Missouri iron metallogenic province and South-Central iron-oxide-apatite (IOA) – iron-oxide-copper-gold (IOCG) province, the Magnet Cove alkaline-carbonatite complex, the Midwest Permian ultramafic dike district, the Illinois-Kentucky fluorspar district, and several Mississippi Valley-type lead-zinc deposits and districts (Fig. 1). These focus areas represent known deposits or prospective host systems of critical minerals including rare earth elements (REEs), platinum-group elements (PGEs), cobalt, lithium, fluorspar, niobium, titanium, vanadium, lead, zinc, gallium, germanium, and many more. Other significant geologic and geophysical features covered include the Reelfoot rift, the New Madrid seismic zone, the Illinois basin, the Arkoma basin, the South-Central magnetic lineament, and the Kentucky-Tennessee magnetic anomaly (Fig. 1). This presentation focuses on new airborne magnetic and radiometric data with continuous coverage across parts of six states, preliminary interpretations, examples of geologic mapping applications, and discussion of newly discovered magnetic anomalies and follow-up investigations.

Conference Paper

U.S. Geological Survey Groundwater Climate Response Network—2023

As of October 2023, the U.S. Geological Survey (USGS) operated more than 660 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells and springs selected to monitor the effects of climate variability, such as droughts, on groundwater levels and spring discharge nationwide. The CRN includes more than 550 locations with realtime data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product