Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surface Water Techniques”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS1977

Geological and geochemical investigations of uranium occurrences in the Arrastre Lake area of the Medicine Bow Mountains, Wyoming

Metasedimentary rocks of Precambrian X age in and near the Snowy Range wilderness study area of southeastern Wyoming are lithologically and chronologically similar to those on the north shore of Lake Huron in Canada. The rocks in Canada contain major deposits of uranium in quartz-pebble conglomerates near the base of the metasedimentary sequence. Similar conglomerates in the Deep Lake Formation in the Medicine Bow Mountains of southeastern Wyoming are slightly radioactive and may contain deposits of uranium and other valuable heavy metals. During the summer of 1976, a geological and geochemical pilot study was conducted in the vicinity of Arrastre Lake in the Medicine Bow Mountains to determine the most effective exploration methods for evaluating the uranium potential of the Snowy Range wilderness study area. The area around Arrastre Lake was selected because of the presence of a radioactive lens within a quartz-pebble conglomerate of the Deep Lake Formation. The results of the survey indicate possible uranium mineralization in the subsurface rocks of this formation. The radon content of the dilute waters of the area is much higher than can be accounted for by the uranium content of the surface rocks. Two sources for the high content of the radon are possible. In either case, the high values of radon obtained in this study are a positive indication of uranium mineralization in the subsurface rocks. The determination of the radon content of water samples is the recommended geochemical technique for uranium exploration in the area. The determination of uranium in water and in organic-rich bog material is also recommended.

Wyoming↗
USGS2008

USGS Research Helps the County of Los Angeles Address New Arsenic Standards

In January 2006, the U.S. Environmental Protection Agency (USEPA) enacted stringent standards on arsenic in drinking water. The new limitsraised concerns about wells in the Antelope Valley of northern Los Angeles County that had high levels of naturally occurring arsenic. To meet the new standard, Los Angeles County Waterworks District No. 40, part of the Los Angeles County Department of Public Works, considered building arsenic-removal facilities at a cost of nearly $34 million. Instead, the District initiated a well-modification project that was based on the findings of a U.S. Geological Survey (USGS) scientific investigation. Using a well flowmeter and down-hole sampler - invented by USGS scientists ? the study team found that high-arsenic levels were concen-trated in the deepest portions of the wells, 600 feet or more below the land surface. Using this finding, the District implemented a well modification pilot project where the deep portions of five wells were sealed off permanently, while preserving the ability to pump high-quality water from the upper sections. Well screens in the upper sections were first cleaned using an innovative sonic technique to increase the yield of high-quality water. The deeper sections then were sealed using micro-fine cement technology. The District now pumps water that meets the new USEPA standard for arsenic from the affected wells. Arsenic concentrations are lower by an average of 84 percent, while well yield is lower by only 24 percent. The total cost of the modification project for the five wells was $608,580; a one-time net savings of 550 percent over construction of an arsenic-removal facility.

Fact Sheet↗
USGS1976

Integration of geological remote-sensing techniques in subsurface analysis

Geological remote sensing is defined as the study of the Earth utilizing electromagnetic radiation which is either reflected or emitted from its surface in wavelengths ranging from 0.3 micrometre to 3 metres. The natural surface of the Earth is composed of a diversified combination of surface cover types, and geologists must understand the characteristics of surface cover types to successfully evaluate remotely-sensed data. In some areas landscape surface cover changes throughout the year, and analysis of imagery acquired at different times of year can yield additional geological information. Integration of different scales of analysis allows landscape features to be effectively interpreted. Interpretation of the static elements displayed on imagery is referred to as an image interpretation. Image interpretation is dependent upon: (1) the geologist's understanding of the fundamental aspects of image formation, and (2.) his ability to detect, delineate, and classify image radiometric data; recognize radiometric patterns; and identify landscape surface characteristics as expressed on imagery. A geologic interpretation integrates surface characteristics of the landscape with subsurface geologic relationships. Development of a geologic interpretation from imagery is dependent upon: (1) the geologist's ability to interpret geomorphic processes from their static surface expression as landscape characteristics on imagery, (2) his ability to conceptualize the dynamic processes responsible for the evolution 6f interpreted geologic relationships (his ability to develop geologic models). The integration of geologic remote-sensing techniques in subsurface analysis is illustrated by development of an exploration model for ground water in the Tucson area of Arizona, and by the development of an exploration model for mineralization in southwest Idaho.

Open-File Report↗
USGS1991

Characteristics of low-slope streams that affect O2 transfer rates

Multiple-regression techniques were used to derive the reaeration coefficients estimating equation for low sloped streams: K2 = 3.83 MBAS-0.41 SL0.20 H-0.76, where K2 is the reaeration coefficient in base e units per day; MBAS is the methylene blue active substances concentration in milligrams per liter; SL is the water-surface slope in foot per foot; and H is the mean-flow depth in feet. Fourteen hydraulic, physical, and water-quality characteristics were regressed against 29 measured-reaeration coefficients for low-sloped (water surface slopes less than 0.002 foot per foot) streams in Massachusetts and New York. Reaeration coefficients measured from May 1985 to October 1988 ranged from 0.2 to 11.0 base e units per day for 29 low-sloped tracer studies. Concentration of methylene blue active substances is significant because it is thought to be an indicator of concentration of surfactants which could change the surface tension at the air-water interface.

Conference Paper↗
USGS1985

Stage fluctuations of Wisconsin lakes

This report describes lake-stage fluctuations of 83 gaged lakes in Wisconsin and presents techniques for estimating stage fluctuation at ungaged lakes. Included are stage information at 83 lakes and stage-frequency data for 32 of these lakes that had sufficient record for analysis. Lakes are classified by a hydrologic-topographic lake classification scheme as ground-water flowthrough (GWF) lakes, surface-water drainage (SWD) lakes, and surface-water flow-through (SWF) lakes. Lakes within the same class were found to have similar water-level fluctuations. The lake-stage records indicate that most annual maximums occur during the months of May and June for all three classes. Annual minimum lake levels generally occur in September for surface-water drainage lakes, in March for surface-water flowthrough lakes, and in November for ground-water flow-through lakes. Data for each lake include location, period of water-level record, hydrologic classification, drainage area, surface area, lake volume, maximum depth, long-term mean stage and its standard deviation, maximum and minimum observed lake stage, and the average annual lake-stage fluctuation.

Wisconsin↗
USGS2012

Simulation of groundwater and surface-water resources and evaluation of water-management alternatives for the Chamokane Creek basin, Stevens County, Washington

A three-dimensional, transient numerical model of groundwater and surface-water flow was constructed for Chamokane Creek basin to better understand the groundwater-flow system and its relation to surface-water resources. The model described in this report can be used as a tool by water-management agencies and other stakeholders to quantitatively evaluate the effects of potential increases in groundwater pumping on groundwater and surface-water resources in the basin. The Chamokane Creek model was constructed using the U.S. Geological Survey (USGS) integrated model, GSFLOW. GSFLOW was developed to simulate coupled groundwater and surface-water resources. The model uses 1,000-foot grid cells that subdivide the model domain by 102 rows and 106 columns. Six hydrogeologic units in the model are represented using eight model layers. Daily precipitation and temperature were spatially distributed and subsequent groundwater recharge was computed within GSFLOW. Streamflows in Chamokane Creek and its major tributaries are simulated in the model by routing streamflow within a stream network that is coupled to the groundwater-flow system. Groundwater pumpage and surface-water diversions and returns specified in the model were derived from monthly and annual pumpage values previously estimated from another component of this study and new data reported by study partners. The model simulation period is water years 1980-2010 (October 1, 1979, to September 30, 2010), but the model was calibrated to the transient conditions for water years 1999-2010 (October 1, 1998, to September 30, 2010). Calibration was completed by using traditional trial-and-error methods and automated parameter-estimation techniques. The model adequately reproduces the measured time-series groundwater levels and daily streamflows. At well observation points, the mean difference between simulated and measured hydraulic heads is 7 feet with a root-mean-square error divided by the total difference in water levels of 4.7 percent. Simulated streamflow was compared to measured streamflow at the USGS streamflow-gaging station-Chamokane Creek below Falls, near Long Lake (12433200). Annual differences between measured and simulated streamflow for the site ranged from -63 to 22 percent. Calibrated model output includes a 31-year estimate of monthly water budget components for the hydrologic system. Five model applications (scenarios) were completed to obtain a better understanding of the relation between groundwater pumping and surface-water resources. The calibrated transient model was used to evaluate: (1) the connection between the upper- and middle-basin groundwater systems, (2) the effect of surface-water and groundwater uses in the middle basin, (3) the cumulative impacts of claims registry use and permit-exempt wells on Chamokane Creek streamflow, (4) the frequency of regulation due to impacted streamflow, and (5) the levels of domestic and stockwater use that can be regulated. The simulation results indicated that streamflow is affected by existing groundwater pumping in the upper and middle basins. Simulated water-management scenarios show streamflow increased relative to historical conditions as groundwater and surface-water withdrawals decreased.

Washington↗
USGS1977

A brief investigation of the surface-water hydrology of Yemen Arab Republic

Yemen, near the southwest tip of the Arabian Peninsula, is a mountainous country bordered by a desert on the east and a coastal plain on the west. Rainfall is low and seasonal; consequently, most streams (wadis) are ephemeral. The natural flow regimens of many of the smaller wadis are modified by terracing for agriculture. The only streamflow data available in Yemen are short records on four large wadis. A brief field investigation and application of reconnaissance techniques are the bases for the largely qualitative description of the hydrology, and for the proposal to collect streamflow data needed for orderly development of the expanding economy. (Woodard-USGS)

Open-File Report↗
USGS2011

Characterization of the intragranular water regime within subsurface sediments: pore volume, surface area, and mass transfer limitations

Although "intragranular" pore space within grain aggregates, grain fractures, and mineral surface coatings may contain a relatively small fraction of the total porosity within a porous medium, it often contains a significant fraction of the reactive surface area, and can thus strongly affect the transport of sorbing solutes. In this work, we demonstrate a batch experiment procedure using tritiated water as a high-resolution diffusive tracer to characterize the intragranular pore space. The method was tested using uranium-contaminated sediments from the vadose and capillary fringe zones beneath the former 300A process ponds at the Hanford site (Washington). Sediments were contacted with tracers in artificial groundwater, followed by a replacement of bulk solution with tracer-free groundwater and the monitoring of tracer release. From these data, intragranular pore volumes were calculated and mass transfer rates were quantified using a multirate first-order mass transfer model. Tritium-hydrogen exchange on surface hydroxyls was accounted for by conducting additional tracer experiments on sediment that was vacuum dried after reaction. The complementary ("wet" and "dry") techniques allowed for the simultaneous determination of intragranular porosity and surface area using tritium. The Hanford 300A samples exhibited intragranular pore volumes of ~1% of the solid volume and intragranular surface areas of ~20%–35% of the total surface area. Analogous experiments using bromide ion as a tracer yielded very different results, suggesting very little penetration of bromide into the intragranular porosity.

Water Resources Research↗
USGS1998

DNA-labeled clay: A sensitive new method for tracing particle transport

The behavior of mobile colloids and sediment in most natural environments remains poorly understood, in part because characteristics of existing sediment tracers limit their widespread use. Here we describe the development of a new approach that uses a DNA-labeled montmorillonite clay as a highly sensitive and selective sediment tracer that can potentially characterize sediment and colloid transport in a wide variety of environments, including marine, wetland, ground-water, and atmospheric systems. Characteristics of DNA in natural systems render it unsuitable as an aqueous tracer but admirably suited as a label for tracing particulates. The DNA-labeled-clay approach, using techniques developed from molecular biology, has extremely low detection limits, very specific detection, and a virtually infinite number of tracer signatures. Furthermore, DNA-labeled clay has the same physical characteristics as the particles it is designed to trace, it is environmentally benign, and it can be relatively inexpensively produced and detected. Our initial results show that short (500 base pair) strands of synthetically produced DNA reversibly adsorb to both Na-montmorillonite and powdered silica surfaces via a magnesium bridge. The DNA-montmorillonite surface complexes are stable in calcium-bicarbonate spring waters for periods of up to 18 days and only slowly desorb to the aqueous phase, whereas the silica surface complex is stable only in distilled water. Both materials readily release the adsorbed DNA in dilute EDTA solutions for amplification by the polymerase chain reaction (PCR) and quantification. The stability of the DNA-labeled clay complex suggests that this material would be appropriate for use as an extremely sensitive sediment tracer for flow periods of as long as 2 weeks, and possibly longer.

Geology↗
USGS2002

Estimating recharge at Yucca Mountain, Nevada, USA: Comparison of methods

Obtaining values of net infiltration, groundwater travel time, and recharge is necessary at the Yucca Mountain site, Nevada, USA, in order to evaluate the expected performance of a potential repository as a containment system for high-level radioactive waste. However, the geologic complexities of this site, its low precipitation and net infiltration, with numerous mechanisms operating simultaneously to move water through the system, provide many challenges for the estimation of the spatial distribution of recharge. A variety of methods appropriate for arid environments has been applied, including water-balance techniques, calculations using Darcy's law in the unsaturated zone, a soil-physics method applied to neutron-hole water-content data, inverse modeling of thermal profiles in boreholes extending through the thick unsaturated zone, chloride mass balance, atmospheric radionuclides, and empirical approaches. These methods indicate that near-surface infiltration rates at Yucca Mountain are highly variable in time and space, with local (point) values ranging from zero to several hundred millimeters per year. Spatially distributed net-infiltration values average 5 mm/year, with the highest values approaching 20 mm/year near Yucca Crest. Site-scale recharge estimates range from less than 1 to about 12 mm/year. These results have been incorporated into a site-scale model that has been calibrated using these data sets that reflect infiltration processes acting on highly variable temporal and spatial scales. The modeling study predicts highly non-uniform recharge at the water table, distributed significantly differently from the non-uniform infiltration pattern at the surface.

Hydrogeology Journal↗
USGS2020

Inoculation and habitat amelioration efforts in biological soil crust recovery vary by desert and soil texture

As dryland degradation continues, it is increasingly important to understand how to effectively restore biocrust communities. Potential techniques include the addition of biocrust inoculum to accelerate biocrust recovery. Enhanced erosion typical of degraded environments creates a challenge for these approaches, due to loss by wind or water and burial by saltating particles. To retain and protect added inoculum, the inclusion of habitat‐amelioration techniques can improve recovery rates. This study tested three different types of inoculum (field‐collected, greenhouse‐cultivated, and laboratory‐cultivated biocrust) coupled with two treatments to augment soil stability and ameliorate habitat limitations: soil surface polyacrylamide additions and installation of straw barriers. This was done across two deserts (Great Basin and Chihuahuan) and separated into generally coarse‐ or finer‐textured soils in each desert, with results monitored for 3 years (2015, 2016, 2017). While the inoculum type, coupled with habitat ameliorations, occasionally enhanced biocrust growth across years and treatments, in other cases, it made no difference compared to natural recovery rates. Rather, the desert location and soil texture groupings were the most prominent factors in determining recovery trajectories. Recovery proportions were similar in the finer‐textured sites in both the Great Basin and the Chihuahuan deserts, while the coarser‐textured site in the Great Basin did show some recovery over time and the Chihuahuan coarser‐textured site did not. This study demonstrates the importance of understanding site potential and identifying key limitations to biocrust recovery for successful restoration projects.

New Mexico, Texas↗
USGS1995

Radon-222 concentrations in ground water and soil gas on Indian reservations in Wisconsin

The weighted average radon-222 concentration of indoor air in homes located on Wisconsin Indian Reservations is 5.8 picocuries per liter, which exceeds the U.S. Environmental Protection Agency action limit of 4 picocuries per liter. Ground water is the principle source of drinking water on Wisconsin Indian Reservations and generally accounts for about 5 percent of the total indoor air radon-222 concentrations found in homes. To determine the distribution of radon-222, ground water from 29 private and community Wisconsin Indian Reservation wells and soil gas at a depth of about 3 feet below land surface adjacent to the wells were sampled. Sites with wells were distributed among the 11 Wisconsin Indian Reservations so that each Reservation contained at least 2 sites. The remaining seven sites were divided among the Reservation by acreage held by each tribe. Ground-water samples were collected using a syringe technique after the wells had been purged sufficiently to reach chemical stability. Samples were then sent by overnight mail to the U.S. Geological Survey, National Water Quality Lab for analysis by liquid scintillation counting. Soil gas was collected in Lucas cells, using a small-diameter soil probe and peristaltic pump. The cells were then analyzed by Lucas cell alpha scintillation counting with a portable radon detector. The highest radon-222 concentrations in ground water and soil gas are from sites with wells finished in the crystalline bedrock aquifer. Radon-222 concentrations in 29 ground-water samples collected from the sand and gravel and sedimentary and crystalline bedrock aquifers range from 260 to 22,000 picocuries per liter with a median concentration of 560 picocuries per liter. Only 2 of the 29 ground-water samples have radon-222 concentrations less than the U.S. Environmental Protection Agency proposed standard of 300 picocuries per liter. The highest radon-222 concentrations were found in ground water from wells in Shawano, Menominee, Forest, and Marathon counties. Radon-222 concentrations in soil gas range from 130 to 7,810 picocuries per liter with a median concentration of 560 picocuries per liter. For sites with wells finished in the sand and gravel aquifer, the coefficient of determination (R2) of the regression of concentration of radon-222 in ground water as a function of well depth is 0.003 and the significance level is 0.32, which indicates that there is not a statistically significant relation between radon-222 concentrations in ground water and well depth. The coefficient of determination of the regression of radon-222 in ground water and soil gas is 0.19 and the root mean square error of the regression line is 271 picocuries per liter. Even though the significance level (0.036) indicates a statistical relation, the root mean square error of the regression is so large that the regression equation would not give reliable predictions. Because of an inadequate number of samples, similar statistical analyses could not be performed for sites with wells finished in the crystalline and sedimentary bedrock aquifers.

Wisconsin↗
USGS1991

Ground-penetrating radar: A tool for mapping reservoirs and lakes

Ground-penetrating radar was evaluated as a tool for mapping reservoir and lake bottoms and providing stage-storage information. An impulse radar was used on a 1.4-ha (3.5-acre) reservoir with 31 transects located 6.1 m (20 feet) apart. Depth of water and lateral extent of the lake bottom were accurately measured by ground-penetrating radar. A linear (positive) relationship existed between measured water depth and ground-penetrating radar-determined water depth (R 2 =0.989). Ground-penetrating radar data were used to create a contour map of the lake bottom. Relationships between water (contour) elevation and water surface area and volume were established. Ground-penetrating radar proved to be a useful tool for mapping lakes, detecting lake bottom variations, locating old stream channels, and determining water depths. The technology provides accurate, continuous profile data in a relatively short time compared to traditional surveying and depth-sounding techniques.

Journal of Soil and Water Conservation↗
USGS1988

Cooperative federal-state liming research on surface waters impacted by acidic deposition

In the eastern and north-central United States, lakes and streams with low acid neutralizing capacity are at risk from acidity. Resource management agencies are interested in developing mitigation strategies that protect or restore fisheries in these waters. Addition of limestone (calcium carbonate) to improve water quality and prevent episodic depressions of pH during precipitation events and spring runoff is one mitigation technique being used. The ecological changes that accompany such treatment of streams and lakes are being investigated in a cooperative program between the U.S. Fish and Wildlife Service and individual states. Streams in Massachusetts, West Virginia and Tennessee, and a lake in Minnesota are included in this 5-yr research program. Intensive monitoring during pre- and post-liming tracks a suite of physical, chemical and biological parameters that influence the re-establishment or maintenance of healthy fisheries. Supporting studies on liming being conducted at Adirondack lakes in New York focus on fisheries management. A model on the influence of liming on light attenuation and thermal stratification is also being developed. Management guidelines are to be generated from the program results.

Massachusetts, Minnesota, Tennessee, West Virginia↗
USGS2011

Estimation of land surface evapotranspiration with A satellite remote sensing procedure

There are various methods available for estimating magnitude and trends of evapotranspiration. Bowen ratio energy balance system and eddy correlation techniques offer powerful alternatives for measuring land surface evapotranspiration. In spite of the elegance, high accuracy, and theoretical attractions of these techniques for measuring evapotranspiration, their practical use over large areas can be limited due to the number of sites needed and the related expense. Application of evapotranspiration mapping from satellite measurements can overcome the limitations. The objective of this study was to utilize the METRIC TM (Mapping Evapotranspiration at High Resolution using Internalized Calibration) model in Great Plains environmental settings to understand water use in managed ecosystems on a regional scale. We investigated spatiotemporal distribution of a fraction of reference evapotranspiration (ETrF) using eight Landsat 5 images during the 2005 and 2006 growing season for path 29, row 32. The ETrF maps generated by METRIC TM allowed us to follow the magnitude and trend in ETrF for major land-use classes during the growing season. The ETrF was lower early in the growing season for agricultural crops and gradually increased as the normalized difference vegetation index of crops increased, thus presenting more surface area over which water could transpire toward the midseason. Comparison of predictions with Bowen ratio energy balance system measurements at Clay Center, NE, showed that METRIC TM performed well at the field scale for predicting evapotranspiration from a cornfield. If calibrated properly, the model could be a viable tool to estimate water use in managed ecosystems in subhumid climates at a large scale.

Great Plains Research↗
USGS1978

Digital-model simulation of the glacial-outwash aquifer, Otter Creek-Dry Creek basin, Cortland County, New York

The city of Cortland, New York, and surrounding areas obtain water from the highly productive glacial-outwash aquifer underlying the Otter Creek-Dry Creek basin. Pumpage from the aquifer in 1976 was approximately 6.3 million gallons per day and is expected to increase as a result of population growth and urbanization. A digital ground-water model that uses a finite-difference approximation technique to solve partial differential equations of flow through a porous medium was used to simulate the movement of water within the aquifer. The model was calibrated to equilibrium conditions by comparing water levels measured in the aquifer in March 1976 with those computed by the model. Then, from the simulated water-level surface for March, a transient-condition run was made to simulate the surface as measured in September 1976. Computed water levels presented as contours are generally in close agreement with potentiometric-surface maps prepared from field measurements of March and September 1976.

New York↗
USGS2007

Remote sensing sensors and applications in environmental resources mapping and modeling

The history of remote sensing and development of different sensors for environmental and natural resources mapping and data acquisition is reviewed and reported. Application examples in urban studies, hydrological modeling such as land-cover and floodplain mapping, fractional vegetation cover and impervious surface area mapping, surface energy flux and micro-topography correlation studies is discussed. The review also discusses the use of remotely sensed-based rainfall and potential evapotranspiration for estimating crop water requirement satisfaction index and hence provides early warning information for growers. The review is not an exhaustive application of the remote sensing techniques rather a summary of some important applications in environmental studies and modeling.

Sensors↗
USGS2014

Integrated assessment of runoff from livestock farming operations: analytical chemistry, in vitro bioassays, and in vivo fish exposures

Animal waste from livestock farming operations can contain varying levels of natural and synthetic androgens and/or estrogens, which can contaminate surrounding waterways. In the present study, surface stream water was collected from 6 basins containing livestock farming operations. Aqueous concentrations of 12 hormones were determined via chemical analyses. Relative androgenic and estrogenic activity was measured using in vitro cell assays (MDA-kb2 and T47D-Kbluc assays, respectively). In parallel, 48-h static-renewal in vivo exposures were conducted to examine potential endocrine-disrupting effects in fathead minnows. Mature fish were exposed to surface water dilutions (0%, 25%, 50%, and 100%) and 10-ng/L of 17α-ethynylestradiol or 50-ng/L of 17β-trenbolone as positive controls. Hepatic expression of vitellogenin and estrogen receptor α mRNA, gonadal ex vivo testosterone and 17β-estradiol production, and plasma vitellogenin concentrations were examined. Potentially estrogenic and androgenic steroids were detected at low nanogram per liter concentrations. In vitro estrogenic activity was detected in all samples, whereas androgenic activity was detected in only 1 sample. In vivo exposures to the surface water had no significant dose-dependent effect on any of the biological endpoints, with the exception of increased male testosterone production in 1 exposure. The present study, which combines analytical chemistry measurements, in vitro bioassays, and in vivo fish exposures, highlights the integrated value and future use of a combination of techniques to obtain a comprehensive characterization of an environmental chemical mixture.

Arkansas, Iowa, Kentucky, New York, Wisconsin↗