Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS2012

Quaternary geologic map of the Havre 1° x 2° quadrangle

The Havre quadrangle encompasses approximately 16,084 km 2 (6,210 mi 2 ). The northern boundary is the Montana/Saskatchewan (U.S./Canada) boundary. The quadrangle is in the Northern Plains physiographic province and it includes parts of the Bearpaw Mountains, the Little Rocky Mountains, and the Boundary Plateau. The primary river is the Milk River. The ancestral Missouri River was diverted south of the Bearpaw Mountains by a Laurentide ice sheet. The fill in the buried ancestral valley at and southwest of Havre contains a complex stratigraphy of fluvial, glaciofluvial, ice-contact, glacial, lacustrine, and eolian deposits. The old valley east of Havre now is occupied by the Milk River. The map units are surficial deposits and materials, not landforms. Deposits that comprise some constructional landforms (e.g., ground-moraine deposits, end-moraine deposits, stagnation-moraine deposits, all composed of till) are distinguished for purposes of reconstruction of glacial history. Surficial deposits and materials are assigned to 24 map units on the basis of genesis, age, lithology or composition, texture or particle size, and other physical, chemical, and engineering characteristics. It is not a map of soils that are recognized in engineering geology, or of substrata or parent materials in which pedologic or agronomic soils are formed. Glaciotectonic (ice-thrust) structures and deposits are mapped separately, represented by a symbol. On the glaciated plains and on the Boundary Plateau the surficial deposits are glacial, ice-contact, glaciofluvial, catastrophic flood, alluvial, lacustrine, eolian, and colluvial deposits. In the Bearpaw Mountains and Little Rocky Mountains beyond the limit of Quaternary glaciation they are fluvial, colluvial, and mass-wasting deposits and residual materials. Tills of late Wisconsin and Illinoian ages are represented by map units. Tills of two pre-Illinoian glaciations are not mapped but are widespread in the subsurface and are identified in stratigraphic sections. Thirteen stratigraphic sections document a complex glacial and interglacial history in the quadrangle. Pliocene continental glaciation possibly is represented by erratic blocks of garnet gneiss and pegmatite from the Canadian Shield, perched high on drainage divides in the western Bearpaw Mountains. Glacial striations on bedrock, two boulder trains, and linear ice-molded landforms (primarily drumlins) indicate the possible presence of an east-southeast flowing ice stream in the Havre glacial lobe during late Wisconsin glaciation.

Montana↗
USGS1971

Hydrologic data for Horseshoe Lake, Arkansas and vicinity

During the summer and fall, seepage and evaporation losses from Horseshoe Lake, an oxbow or an 'old river' lake adjacent to the Mississippi River, exceed inflow to the lake, and seasonal declines of 2.5-3.0 feet in the lake level are common. In exceptionally dry years, the minimum lake level has been as much as 4 feet below the normal seasonal low. These low levels severely affect the recreational uses of the lake. Seepage and evaporation rates at Horseshoe Lake were determined from hydrologic and meteorologic data. Analysis of these data indicates that the direction of seepage is out of the lake except for a period of about 2 months in the spring, when the stage of the Mississippi River is high. The lake can be maintained at a constant level by supplementing the inflow to the lake with surface or ground water. Contributions to the lake from local drainage can be increased, but this water contains undesirable amounts of pesticides, herbicides, and plant nutrients, and the flow is insufficient to eliminate seasonal declines in the lake level. Water from r the Mississippi River can be used to maintain a given lake level, but the bacteriological quality of water from the river makes this an undesirable source of supplemental water. Water from the Quaternary alluvium contains troublesome amounts of iron, but it probably is free of pesticides, herbicides, and coliform bacteria which are commonly found in surface water. An electric-analog model was used to determine the rate at which inflow to the lake must be supplemented to maintain various lake levels. During this investigation, the lake could have been maintained very near the normal spring level by supplementing the inflow at a maximum rate of 10,600 gallons per minute. The analog model was also used to determine the effects of pumping wells on seepage. With the exception of wells near the southeast end of the lake, wells located within one-half mile of the lake would obtain more than 50 percent of their yield from the lake after pumping for 90 days.

Open-File Report↗
USGS1972

Reconnaissance geology of the Precambrian rocks in the Wadi Mahraghah quadrangle, Kingdom of Saudi Arabia

The Wadi Mahraghah quadrangle covers an area of 2863 sq km at the eastern edge of the Precambrian Shield in Saudi Arabia. Precambrian rocks are exposed in the western quarter of the quadrangle. To the east the Precambrian rocks are overlain by limestone of Permian age and by Quaternary sand and gravel. The Precambrian rocks consist of granite intruded by a swarm of andesite dikes. These igneous rocks are overlain by sedimentary formations of the Precambrian Murdama Group comprising conglomerate of the Z'reiba Formation which grades upward into graywacke of the Abt Formation. Rhyolite dikes intrude the Abt. Possibly owing to these rhyolite dikes, or possibly as a result of weak mineralization along west-northwest- and east-trending faults related to the Najd fault zone, the area underlain by graywacke and conglomerate is characterized by threshold or anomalous amounts of beryllium in samples of wadi sand. Samples of sand from granitic areas contain threshold amounts of barium and lanthanum, but none is anomalous, no ancient mine nor other megascoplc evidence of mineralization was found; however,

Open-File Report↗
USGS2012

Preliminary surficial geologic map of the Newberry Springs 30' x 60' quadrangle, California

The Newberry Springs 30' x 60' quadrangle is located in the central Mojave Desert of southern California. It is split approximately into northern and southern halves by I-40, with the city of Barstow at its western edge and the town of Ludlow near its eastern edge. The map area spans lat 34°30 to 35° N. to long -116 °to -117° W. and covers over 1,000 km 2 . We integrate the results of surficial geologic mapping conducted during 2002-2005 with compilations of previous surficial mapping and bedrock geologic mapping. Quaternary units are subdivided in detail on the map to distinguish variations in age, process of formation, pedogenesis, lithology, and spatial interdependency, whereas pre-Quaternary bedrock units are grouped into generalized assemblages that emphasize their attributes as hillslope-forming materials and sources of parent material for the Quaternary units. The spatial information in this publication is presented in two forms: a spatial database and a geologic map. The geologic map is a view (the display of an extracted subset of the database at a given time) of the spatial database; it highlights key aspects of the database and necessarily does not show all of the data contained therein. The database contains detailed information about Quaternary geologic unit composition, authorship, and notes regarding geologic units, faults, contacts, and local vegetation. The amount of information contained in the database is too large to show on a single map, so a restricted subset of the information was chosen to summarize the overall nature of the geology. Refer to the database for additional information. Accompanying the spatial data are the map documentation and spatial metadata. The map documentation (this document) describes the geologic setting and history of the Newberry Springs map sheet, summarizes the age and physical character of each map unit, and describes principal faults and folds. The Federal Geographic Data Committee (FGDC) compliant metadata provides detailed information about the digital files and file structure of the spatial data.

California↗
USGS2023

Paleohydrologic history of pluvial lake San Agustin, New Mexico: Tracking changing effective moisture in southwest North America through the last glacial transition

Paleoclimate records across the Intermountain West region of North America show significant regional variation in timing and magnitude of wet conditions that accompanied the last glacial-interglacial transition. To understand the climate controls on paleohydrologic change, well-dated records are needed across the region. The Plains of San Agustin (New Mexico, USA) is a closed-basin watershed of the American Southwest influenced by both winter westerly and summer North American Monsoon precipitation. The flat valley floors of the Plains contain lake and groundwater discharge deposits that record multiple periods of past wet climate. We present a record of hydroclimate for the past 26,000 years based on radiocarbon, U–Th series, and OSL dating of these deposits and stratigraphic correlation across the three sub-basins of the lake system. We find that two major lake oscillations occurred, coincident with the global Last Glacial Maximum (∼23–18 ka) and with Heinrich Stadial 1 (∼17–14 ka). The LGM lake cycle created a deep lake in the lowermost sub-basin, fed by marsh/lake overflow in the upper sub-basins. The Heinrich Stadial 1 wet interval attained the highest recorded lake level between ∼17.0 and 15.3 ka, merging the lower two sub-basins into one lake. Both lake cycles agree well in timing and magnitude with other lake-based records from the southwestern U.S., supporting previous interpretations that a south-shifted cool season storm track brought a dipole-like pattern of enhanced moisture to the southwest at the expense of drier conditions in the northwest during the LGM and deglaciation. A transition from lake to groundwater discharge conditions followed during the Bølling-Allerød (14.7–12.9 ka) across the study area. Wet meadows prevailed in the lower sub-basin during the Younger Dryas (12.9–11.7 ka), with marsh and open lake conditions in the upper and middle sub-basins, respectively. During the early Holocene, discrete wet intervals are recorded by ages for wet meadow deposits in all sub-basins with centennial-millennial frequency at 9.9, 8.8, 8.2 ka. These events agree well with other Intermountain West records showing wetter-than-present conditions prior to 8 ka. Two additional wet periods, centered at 6.8 and 5.4 ka, occurred during the driest known interval of the middle Holocene, and likely were partly supported in the Plains of San Agustin by summer moisture associated with the peak strength of the North American Monsoon. Our record highlights that both winter and summer moisture support water resources in New Mexico watersheds.

New Mexico↗
USGS2007

Near-Surface Shear Wave Velocity Versus Depth Profiles, VS30, and NEHRP Classifications for 27 Sites in Puerto Rico

In 2004 and 2005 the Puerto Rico Seismic Network (PRSN), Puerto Rico Strong Motion Program (PRSMP) and the Geology Department at the University of Puerto Rico-Mayaguez (UPRM) collaborated with the U.S. Geological Survey to study near-surface shear-wave (Vs) and compressional-wave (Vp) velocities in and around major urban areas of Puerto Rico. Using noninvasive seismic refraction-reflection profiling techniques, we acquired velocities at 27 locations. Surveyed sites were predominantly selected on the premise that they were generally representative of near-surface materials associated with the primary geologic units located within the urbanized areas of Puerto Rico. Geologic units surveyed included Cretaceous intrusive and volcaniclastic bedrock, Tertiary sedimentary and volcanic units, and Quaternary unconsolidated eolian, fluvial, beach, and lagoon deposits. From the data we developed Vs and Vp depth versus velocity columns, calculated average Vs to 30-m depth (VS30), and derived NEHRP (National Earthquake Hazards Reduction Program) site classifications for all sites except one where results did not reach 30-m depth. The distribution of estimated NEHRP classes is as follows: three class 'E' (VS30 below 180 m/s), nine class 'D' (VS30 between 180 and 360 m/s), ten class 'C' (VS30 between 360 and 760 m/s), and four class 'B' (VS30 greater than 760 m/s). Results are being used to calibrate site response at seismograph stations and in the development of regional and local shakemap models for Puerto Rico.

Open-File Report↗
USGS2007

Geologic Map of the Goleta Quadrangle, Santa Barbara County, California

This map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying those parts of the Santa Barbara coastal plain and adjacent southern flank of the Santa Ynez Mountains within the Goleta 7 ?? quadrangle at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. The Goleta map overlaps an earlier preliminary geologic map of the central part of the coastal plain (Minor and others, 2002) that provided coverage within the coastal, central parts of the Goleta and contiguous Santa Barbara quadrangles. In addition to new mapping in the northern part of the Goleta quadrangle, geologic mapping in other parts of the map area has been revised from the preliminary map compilation based on new structural interpretations supplemented by new biostratigraphic data. All surficial and bedrock map units are described in detail in the accompanying map pamphlet. Abundant biostratigraphic and biochronologic data based on microfossil identifications are presented in expanded unit descriptions of the marine Neogene Monterey and Sisquoc Formations. Site-specific fault-kinematic observations (including slip-sense determinations) are embedded in the digital map database. The Goleta quadrangle is located in the western Transverse Ranges physiographic province along an east-west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The Santa Barbara coastal plain surface, which spans the central part of the quadrangle, includes several mesas and hills that are geomorphic expressions of underlying, potentially active folds and partly buried oblique and reverse faults of the Santa Barbara fold and fault belt (SBFFB). Strong earthquakes have occurred offshore within 10 km of the Santa Barbara coastal plain in 1925 (6.3 magnitude), 1941 (5.5 magnitude) and 1978 (5.1 magnitude). These and numerous smaller seismic events located beneath and offshore of the coastal plain, likely occurred on reverse-oblique-slip faults that are similar to, or continuous with, Quaternary reverse faults crossing the coastal plain. Thus, faults of the SBFFB pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. In addition, numerous Quaternary landslide deposits along the steep southern flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements in developed areas. Folded, faulted, and fractured sedimentary rocks in the subsurface of the coastal plain and adjacent Santa Barbara Channel are sources and form reservoirs for economic deposits of oil and gas, some of which are currently being extracted offshore. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and interpretation of these and other geologic hazards and resources in the Goleta region.

Open-File Report↗
USGS1986

Mines and prospects of the Butte 1° x 2° Quadrangle, Montana

The Butte quadrangle, in the Northern Rocky Mountains of southwestern Montana, has had a long, productive, and colorful mining history. Butte, the city from which the quadrangle takes its name, is located in the most famous mining district of the quadrangle. This district, the Butte or Summit Valley district, has been described as the "richest hill on earth" and is one of the richest and most productive mining districts of the world. The quantity of metals produced from this district alone are far greater than the combined total of all commodities from all other mining districts of the quadrangle. However, many districts other than Butte have had significant production as compared to other mining districts of the Northern Rocky Mountains. The dollar value of production from the Butte district is more than $6 billion (Miller, 1973) and that of the combined total of production from the other districts in the quadrangle is more than $400 million. These values are based on actual metal prices at the time of production. The totals would be many times larger if converted to present day commodity prices. Mineral occurrence data for a total of 1111 mines, prospects, and mineral occurrences have been compiled for the Butte quadrangle. These mineralized sites are found throughout the quadrangle but most are concentrated in the major mining districts; 78 percent are clustered in 46 established mining districts and the remaining 22 percent are more widely scattered in 24 geographic areas (fig. 1). Only small areas of the quadrangle lack significant mines, prospects, or mineral occurrences. The locations of mines and prospects are shown on maps (pl. 1 and 2) and a brief description of each site is given in a table arranged by mining district or geographic area (table 1) (all tables are at end of report). This table gives a brief description of each district or area and details of each site within the district or area including site number, name and alternate name(s), location by latitude and longitude, commodities present, description of the site, and sources of data. Data for this report come from the U.S. Geological Survey Mineral Resource Data System (MRDS; this was formerly known as the Computerized Resource Information Bank (CRIB)), from many published and unpublished sources, and from geologic field work. The Butte quadrangle is in southwestern Montana and is bounded by latitudes 46° and 47° N. and longitudes 112° and 114° W. The city of Butte is near the southern edge and in the southeastern corner of the quadrangle. Helena, the state capital of Montana, is located on the eastern edge and Missoula is located near the northwestern corner of the quadrangle. Most of the area of the quadrangle is in Granite, Powell, Lewis and Clark, and Jefferson Counties and the remaining area includes parts of Missoula, Ravalli, Deer Lodge, and Silver Bow Counties. The quadrangle includes a number of major and minor mountain ranges separated by intermontane valleys. The continental divide trends nearly north-south through the eastern part of the quadrangle to a point near Butte, then trends generally east-west near the southern boundary of the quadrangle, west of Butte. East of the divide the drainages are tributary to the Missouri River and west of the divide the drainages are tributary to the Clark Fork, which heads in the vicinity of Butte. The geology of the Butte quadrangle is very complex. Sedimentary and igneous rocks range in age from Proterozoic to Tertiary. Most of the pre-Tertiary sedimentary rocks are structurally complex due to widespread faulting and folding. Due to thrust faulting, complete sequences of these sedimentary units are not generally present in the quadrangle and the thicknesses and lithologies are variable from one thrust plate to another. The oldest rocks in the quadrangle are sedimentary rocks of the Belt Supergroup of Middle Proterozoic age. They form very thick sequences, are exposed over a large percentage of the area of the quadrangle, and include formations of the lower, middle, and upper parts of the Belt. Individual formations are as much as 13,000 ft thick (C. A. Wallace, unpub. data) and the maximum thickness of the Belt Supergroup in the quadrangle may be similar to that of the entire sequence near Alberton, Montana, to the northwest of the Butte quadrangle where it exceeds 67,000 ft (Harrison, 1972). In many areas of the quadrangle these Precambrian rocks are overlain by thin to moderately thick sequences of Cambrian to Permian sedimentary rocks. The maximum thickness of the Paleozoic section is about 8,000 ft (C. A. Wallace, unpub. data). A relatively thick sequence of Mesozoic sedimentary rocks, predominantly Cretaceous in age, which is found mostly in the central part of the quadrangle, overlies the Paleozoic rocks. If complete, the Mesozoic sequence would total about 28,000 ft (C. A. Wallace, unpub. data). The Butte quadrangle is located in a structurally complex region. Most of the Butte quadrangle is in the southern part of the Montana Disturbed Belt, a tectonic belt in the Northern Rocky Mountains characterized by northwest-trending faults and intense deformation. An element of the Disturbed Belt, called the Sapphire Thrust System occupies most of the western two-thirds of the quadrangle. Sedimentary rocks of Cretaceous and older ages in the Sapphire Thrust System have been complexly folded and faulted. Plutonic rocks, which intrude the sedimentary units, and volcanic rocks of Cretaceous and Tertiary ages are widespread in the quadrangle. Most of these are post-thrusting but some may be pre- or syn-tectonic and involved in the thrusting and folding. Most of the mineral wealth in the quadrangle, in the form of hydrothermal ore deposits, is genetically related to Cretaceous granitic plutonism. Igneous activity decreased but continued into Tertiary time, at least until the Oligocene. In the Butte quadrangle the Cenozoic Era was important for normal faulting, volcanism, sedimentation, glaciation, and the formation of many important mineral deposits. Many normal faults were especially active during the Miocene and Pliocene and some were active into the Quaternary. Volcanic rocks of Eocene and Oligocene age cover large areas and are genetically related to several important mining districts. During Cenozoic time, thick accumulations of Tertiary basin-fill sediments, Pleistocene glacial till and outwash, and Holocene alluvium and colluvium were deposited. The Cenozoic was important for the formation of placer deposits valuable mainly for gold but some have produced important quantities of sapphires and tungsten. This map is part of a folio of maps of the Butte 1° x 2°quadrangle, Montana, prepared under the Conterminous United States Mineral Assessment Program (CUSMAP). Other maps to be published as part of this folio are a geologic map, geochemical maps, geophysical maps, maps of linear features and limonitic alteration interpreted from satellite and airborne radar data, and mineral resource assessment maps.

Montana↗
USGS1994

Evidence of prehistoric flooding and the potential for future extreme flooding at Coyote Wash, Yucca Mountain, Nye County, Nevada

Coyote Wash, east of Yucca Mountain and southwest of the Nevada Test Site, is the potential location for an exploratory shaft to investigate the feasibility of underground storage of radioactive waste. The potential for flooding and related fluvial-debris hazards was investigated with respect to the potential shaft location. Trenches excavated through fluvial sediment deposits revealed interstratified rock detritus emplaced by floods and debris flows. Most of the deposits are believed to be of late Quaternary age. Debros-flow deposits contain boulders as large as 3 feet in diameter. This evidence of intense prehistoric flooding and debris movement indicates the possibility of similar continuing activity. Empirical estimates of extreme flood flows in North Fork Coyote Wash, a 0.094- square-mile drainage to the shaft site, range from 900 to 2,600 cubic feet per second. Current (1992) knowledge indicates that flows of water and debris as much as 2,500 cubic feet per second can occur in the vicinity of the shaft from this drainage. Similar size flows from adjacent South Fork Coyote Wash, could arrive simultaneously in the vicinity of the shaft. Thus, cumulative water and debris from both tributaries could subject the alluvial flood plain near the shaft site to flows of as much as 5,000 cubic feet per second.

Open-File Report↗
USGS2000

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through 1999

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground-water resources. An increase in the population of about 35 percent from 1980 to 1990 has resulted in an increased demand for water. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. This network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly. Currently (1999), the network consists of 221 wells and piezometers. U.S. Geological Survey personnel collect water-level measurements at sites 1-88 and sites 165-221. Water-level and other data for sites 89-164 are measured by other agencies and reported to the USGS.

Open-File Report↗
USGS2001

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through 2000

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the Albuquerque Basin are obtained solely from ground- water resources. An increase of about 35 percent in the population from 1980 to 1990 has resulted in an increased demand for water. From April 1982 through September 1983, a network of wells was established to monitor changes in ground-water levels throughout the Albuquerque Basin. This network consisted of 6 wells with analog- to-digital recorders and 27 wells where water levels were measured monthly. Currently (2000), the network consists of 221 wells and piezometers. U.S. Geological Survey personnel collect water- level measurements at sites 1-88 and sites 165-221. Water-level and other data for sites 89-164 are measured by other agencies and reported to the U.S. Geological Survey.

Open-File Report↗
USGS1979

Possible uranium mineralization, Mineral Mountains, Utah

The Mineral Mountains block in west-central Utah is a horst whose core stands structurally high relative to all nearby basin-and-range fault blocks. Rocks of the Mineral Mountains range from Precambrian to Quaternary in age, but mostly consist of Tertiary granitic rocks. The range lies with the Wah Wah-Tusher mineral belt. Lead, silver, gold, and tungsten have been mined commercially. During a geochemical survey conducted in the summer of 1978, 30 water samples and 29 stream-sediment samples were collected from the Mineral Mountains area. The interpretation of simple plots of uranium concentrations and the results of a Q-mode factor analysis indicate that potential exists for uranium mineral deposits within the Mineral Mountains. The most favorable areas are in the granitic pluton near its contacts with sedimentary and metamorphic rocks. The most likely source of the uranium anomalies is uraninite-bearing epigenic veins along faults and fractures within the pluton. Three hypothetical models are proposed to account for the uranium mineralization.

Open-File Report↗
USGS2017

Oxygen isotope geochemistry of mafic phenocrysts in primitive mafic lavas from the southernmost Cascade Range, California

Previously reported whole-rock δ 18 O values (5.6–7.8‰) for primitive quaternary mafic lavas from the southernmost Cascades (SMC) are often elevated (up to 1‰) relative to δ 18 O values expected for mafic magmas in equilibrium with mantle peridotite. Olivine, clinopyroxene, and plagioclase crystals were separated from 29 geochemically well-characterized mafic lavas for δ 18 O measurements by laser fluorination to assess modification of the mantle sources by ancient and modern subducted components. Oxygen isotope values of olivine phenocrysts in calc-alkaline lavas and contemporaneous high alumina olivine tholeiitic (HAOT) lavas generally exceed depleted mantle olivine values (~4.9–5.3‰). Modern addition of up to 6 wt% slab-derived fluid from Gorda serpentinized peridotite dehydration (~15‰) or chlorite dehydration (~10‰) within the serpentinized peridotite can provide the 18 O enrichment detected in olivine phenocrysts (δ 18 O olivine = 5.3–6.3‰) in calc-alkaline mafic lavas, and elevate 18 O in overlying mantle lithosphere, as well. Specifically, although HAOT δ 18 O olivine values (5.5–5.7‰) may reflect partial melting in heterogeneous 18 O enriched mantle source domains that developed during multiple subduction events associated with terrane accretion (e.g., <1 wt% of ~15‰ materials), an additional 18 O enrichment of up to 2 wt% of 10–15‰ slab-derived hydrous fluids might be accommodated. The calc-alkaline primitive magmas appear to have experienced a continuous range of open system processes, which operate in the mantle and during rapid magma ascent to eruption, and occasionally post quench. Textural relationships and geochemistry of these lava samples are consistent with blends of mafic phenocrysts and degassed melts in varying states of 18 O disequilibrium. In lenses of accumulated melt within peridotite near the base of the crust, coexisting olivine and clinopyroxene δ 18 O values probably are not at isotopic equilibrium because fluids introduced into the system perturbed the δ 18 O melt values. A “sudden” melt extraction event interrupts 18 O equilibration in phenocrysts and poorly mixed melt(s). Rapid ascent of volatile oversaturated primitive mafic magma through the crust appears to be accompanied by devolatilization and crystallization of anorthite-rich plagioclase with elevated δ 18 O plag values. The (Sr/P) N values for the whole rock geochemistry are consistent with a 87 Sr/ 86 Sr ~0.7027 slab-derived fluid addition into the infertile peridotite source of magmas, and melt devolatilization is recorded in the mixture of disequilibrium δ 18 O values for the constituent phases of lavas. Morbidity of the Gorda Plate as it undergoes intense deformation from the spreading ridge to the trench is likely a key factor to developing the carrying capacity of hydrous fluids and mineral phases in the slab subducting into the SMC mantle.

California↗
USGS2018

Geologic map of the Washington West 30’ × 60’ quadrangle, Maryland, Virginia, and Washington D.C.

The Washington West 30’ × 60’ quadrangle covers an area of approximately 4,884 square kilometers (1,343 square miles) in and west of the Washington, D.C., metropolitan area. The eastern part of the area is highly urbanized, and more rural areas to the west are rapidly being developed. The area lies entirely within the Chesapeake Bay drainage basin and mostly within the Potomac River watershed. It contains part of the Nation's main north-south transportation corridor east of the Blue Ridge Mountains, consisting of Interstate Highway 95, U.S. Highway 1, and railroads, as well as parts of the Capital Beltway and Interstate Highway 66. Extensive Federal land holdings in addition to those in Washington, D.C., include the Marine Corps Development and Education Command at Quantico, Fort Belvoir, Vint Hill Farms Station, the Naval Ordnance Station at Indian Head, the Chesapeake and Ohio Canal National Historic Park, Great Falls Park, and Manassas National Battlefield Park. The quadrangle contains most of Washington, D.C.; part or all of Arlington, Culpeper, Fairfax, Fauquier, Loudoun, Prince William, Rappahannock, and Stafford Counties in northern Virginia; and parts of Charles, Montgomery, and Prince Georges Counties in Maryland. The Washington West quadrangle spans four geologic provinces. From west to east these provinces are the Blue Ridge province, the early Mesozoic Culpeper basin, the Piedmont province, and the Coastal Plain province. There is some overlap in ages of rocks in the Blue Ridge and Piedmont provinces. The Blue Ridge province, which occupies the western part of the quadrangle, contains metamorphic and igneous rocks of Mesoproterozoic to Early Cambrian age. Mesoproterozoic (Grenville-age) rocks are mostly granitic gneisses, although older metaigneous rocks are found as xenoliths. Small areas of Neoproterozoic metasedimentary rocks nonconformably overlie Mesoproterozoic rocks. Neoproterozoic granitic rocks of the Robertson River Igneous Suite intruded the Mesoproterozoic rocks. The Mesoproterozoic rocks are nonconformably overlain by Neoproterozoic metasedimentary rocks of the Fauquier and Lynchburg Groups, which in turn are overlain by metabasalt of the Catoctin Formation. The Catoctin Formation is overlain by Lower Cambrian clastic metasedimentary rocks of the Chilhowee Group. The Piedmont province is exposed in the east-central part of the map area, between overlapping sedimentary units of the Culpeper basin on the west and those of the Coastal Plain province on the east. In this area, the Piedmont province contains Neoproterozoic and lower Paleozoic metamorphosed sedimentary, volcanic, and plutonic rocks. Allochthonous mélange complexes on the western side of the Piedmont are bordered on the east by metavolcanic and metasedimentary rocks of the Chopawamsic Formation, which has been interpreted as part of volcanic arc. The mélange complexes are unconformably overlain by metasedimentary rocks of the Popes Head Formation. The Silurian and Ordovician Quantico Formation is the youngest metasedimentary unit in this part of the Piedmont. Igneous rocks include the Garrisonville Mafic Complex, transported ultramafic and mafic inclusions in mélanges, monzogranite of the Dale City pluton, and Ordovician tonalitic and granitic plutons. Jurassic diabase dikes are the youngest intrusions. The fault boundary between rocks of the Blue Ridge and Piedmont provinces is concealed beneath the Culpeper basin in this area but is exposed farther south. Early Mesozoic rocks of the Culpeper basin unconformably overlie those of the Piedmont and Blue Ridge provinces in the central part of the quadrangle. The north-northeast-trending extensional basin contains Upper Triassic to Lower Jurassic nonmarine sedimentary rocks. Lower Jurassic sedimentary strata are interbedded with basalt flows, and both Upper Triassic and Lower Jurassic strata are intruded by diabase of Early Jurassic age. The Bull Run Mountain fault, a major Mesozoic normal fault characterized by down-to-the-east displacement, separates rocks of the Culpeper basin from those of the Blue Ridge province on the west. On the east, the contact between rocks of the Culpeper basin and those of the Piedmont province is an unconformity, which has been locally disrupted by normal faults. Sediments of the Coastal Plain province unconformably overlie rocks of the Piedmont province along the Fall Zone and occupy the eastern part of the quadrangle. Lower Cretaceous deposits of the Potomac Formation consist of fluvial-deltaic gravels, sands, silts, and clays. Discontinuous fluvial and estuarine terrace deposits of Pleistocene and middle- to late-Tertiary age flank the modern Potomac River valley unconformable capping these Cretaceous strata and the crystalline basement where the Cretaceous has been removed by erosion. East of the Potomac River, the Potomac Formation is onlapped and unconformably overlain by a westward thinning wedge of marine sedimentary deposits of Late Cretaceous and early- and late-Tertiary age. Basement rooted Coastal Plain faults of Tertiary to Quaternary age occur along the Fall Zone and this part of the inner Coastal Plain. These Coastal Plain faults have geomorphic expression that appear to influence river drainage patterns. The geologic map of the Washington West quadrangle is intended to serve as a foundation for applying geologic information to problems involving land use decisions, groundwater availability and quality, earth resources such as natural aggregate for construction, assessment of natural hazards, and engineering and environmental studies for waste disposal sites and construction projects. This 1:100,000-scale map is mainly based on more detailed geologic mapping at a scale of 1:24,000.

Maryland, Virginia↗
USGS1997

Digital data sets that describe aquifer characteristics of the Central Oklahoma Aquifer in central Oklahoma

ARC/INFO export files The data sets in this report include digitized aquifer boundaries and maps of hydraulic conductivity, recharge, and ground-water level elevation contours for the Central Oklahoma aquifer in central Oklahoma. This area encompasses all or part of Cleveland, Lincoln, Logan, Oklahoma, Payne, and Pottawatomie Counties. The Central Oklahoma aquifer includes the alluvial and terrace deposits along major streams, the Garber Sandstone and Wellington Formations, and the Chase, Council Grove, and Admire Groups. The Quaternary-age alluvial and terrace deposits consist of unconsolidated clay, silt, sand, and gravel. The Permian-age Garber Sandstone and Wellington Formations consist of sandstone with interbedded siltstone and mudstone. The Permian-age Chase, Council Grove, and Admire Groups consist of sandstone, shale, and thin limestone. The Central Oklahoma aquifer underlies about 3,000 square miles of central Oklahoma where the aquifer is used extensively for municipal, industrial, commercial, and domestic water supplies. Most of the usable ground water within the aquifer is from the Garber Sandstone and Wellington Formations. Substantial quantities of usable ground water also are present in the Chase, Council Grove, and Admire Groups, and in alluvial and terrace deposits associated with the major streams. The aquifer boundaries, hydraulic conductivity and recharge values, and ground-water level elevation contours are from previously published reports.

Oklahoma↗
USGS2016

Potash—A vital agricultural nutrient sourced from geologic deposits

This report summarizes the primary sources of potash in the United States. Potash is an essential nutrient that, along with phosphorus and nitrogen, is used as fertilizer for growing crops. Plants require sufficient potash to activate enzymes, which in turn catalyze chemical reactions important for water uptake and photosynthesis. When potassium is available in quantities necessary for healthy plant growth, disease resistance and physical quality are improved and crop yield and shelf life are increased. Potash is a water-soluble compound of potassium formed by geologic and hydrologic processes. The principal potash sources discussed are the large, stratiform deposits that formed during retreat and evaporation of intracontinental seas. The Paradox, Delaware, Holbrook, Michigan, and Williston sedimentary basins in the United States are examples where extensive potash beds were deposited. Ancient marine-type potash deposits that are close to the surface can be mined using conventional underground mining methods. In situ solution mining can be used where beds are too deep, making underground mining cost-prohibitive, or where underground mines are converted to in situ solution mines. Quaternary brine is another source of potash that is recovered by solar evaporation in manmade ponds. Groundwater from Pleistocene Lake Bonneville (Wendover, Utah) and the present-day Great Salt Lake in Utah are sources of potashbearing brine. Brine from these sources pumped to solar ponds is evaporated and potash concentrated for harvesting, processing, and refinement. Although there is sufficient potash to meet near-term demand, the large marine-type deposits are either geographically restricted to a few areas or are too deep to easily mine. Other regions lack sources of potash brine from groundwater or surface water. Thus, some areas of the world rely heavily on potash imports. Political, economic, and global population pressures may limit the ability of some countries from securing potash resources in the future. In this context, a historical perspective on U.S. potash production in a global framework is discussed.

Open-File Report↗
USGS2021

Geologic and hydrogeologic characteristics of the White River Formation, Lance Formation, and Fox Hills Sandstone, northern greater Denver Basin, southeastern Laramie County, Wyoming

In cooperation with the Wyoming State Engineer’s Office, the U.S. Geological Survey studied the geologic and hydrogeologic characteristics of Cenozoic and Upper Cretaceous strata at a location in southeastern Laramie County within the Wyoming part of the Cheyenne Basin, the northern subbasin of the greater Denver Basin. The study aimed to improve understanding of the aquifers/aquifer systems in these strata, motivated in part by declining groundwater levels and interest in exploring future groundwater supplies. Based on detailed geologic characterization using information obtained by drilling and coring a 960-foot-(ft) deep exploratory borehole, and comparisons with previously published descriptions, identified Cenozoic lithostratigraphic units included 40 ft of Quaternary older alluvial fan deposits consisting of an unconsolidated mixture of sand and gravel with lesser quantities of silt and clay in varying proportions and the underlying 407.3-ft-thick White River Formation of late Eocene-Oligocene age consisting largely of mudrocks with sparse thin beds of sandstone, muddy gravel, and conglomeratic mudrocks. Identified Upper Cretaceous lithostratigraphic units included the 351.6-ft-thick Lance Formation, consisting of terrestrial sedimentary rocks including mudrocks (muddy shale and silty and sandy shale, siltstone, claystone, and mudstone) interbedded with much smaller quantities of very fine- to medium-grained muddy and silty sandstone and coal; the 79.6-ft-thick Fox Hills Sandstone, consisting of a transitional marine sequence of muddy or silty sandstone present in five individual beds; and 86.7 ft of the upper transition member of the Pierre Shale, consisting largely of marine sedimentary rocks such as muddy shale. Beds of the upper and lower Fox Hills Sandstone were separated by tongues of the Lance Formation and upper transition member of the Pierre Shale, respectively. The White River hydrogeologic unit, consisting of the entire White River Formation or Group at the study site, did not contain any substantial secondary permeability features in the mudrocks that composed almost all the unit. A monitoring well (BR–1) was completed in the White River aquifer with the well screen open to the only coarse-grained unit (muddy sandstone) that had sufficient thickness and permeability to be considered as an aquifer. Sampling of the well for a broad suite of constituents indicated groundwater generally was of excellent quality except dissolved arsenic was detected at a concentration greater than the U.S. Environmental Protection Agency (EPA) Maximum Contaminant Level, and dissolved sodium was measured at a concentration greater than several EPA Drinking Water Advisory Levels (DWAs) for the constituent. Well development, well purging for groundwater sampling, and calculated aquifer properties indicated the sandstone aquifer screened by monitoring well BR–1 was not very productive. Analysis of the well water-level responses in BR–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response with wellbore-storage effects. Hydraulic properties estimated based on these responses yielded values of hydraulic conductivity ( K , 0.057 foot per day [ft/d]), specific storage ( Ss , 1.6×10 −6 per foot [ft −1 ]) and porosity ( n , 0.43). Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated an upward trend (+1.13 foot per year [ft/yr]) during the period analyzed, September 5, 2014, to September 30, 2017. Lithologic characteristics of the Lance hydrogeologic unit, consisting of the entire Lance Formation at the study site, indicated a potential aquifer in a “sandy” interval in the upper part of the unit. Most of the Lance hydrogeologic unit below the “sandy” interval consisted of various low-permeability lithologies unlikely to yield substantial quantities of water. This lower part of the hydrogeologic unit likely functions as a confining unit separating the underlying Lance-Fox Hills aquifer. A geologic cross section constructed for this study indicated fine-grained sediments composed most of the Lance Formation/hydrogeologic unit not only at the study location, but also throughout southern Laramie County along the line of section and throughout the Wyoming and Colorado parts of the Cheyenne Basin. A monitoring well (LN–1) completed in a sandstone bed in the “sandy” interval of the Lance hydrogeologic unit produced a mean of about 23 gallons per minute (gal/min) during well development, indicating sandstone beds can form moderately productive confined subaquifers in this part of the hydrogeologic unit. Analysis of the well water-level responses in well LN–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties estimated based on these responses yielded values for a lower bounding K of 0.60 ft/d, Ss of 1.6×10 −6 ft −1 , and n of 0.38. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−0.86 ft/yr) during the period analyzed (November 8, 2014, to September 30, 2017). Analyses for a broad suite of constituents in samples from well LN–1 indicated groundwater quality generally was excellent, although dissolved sodium was measured at a concentration greater than two EPA DWA levels for the constituent. Because of the absence of any overlying or intertonguing sandstone beds belonging to the lower/basal part of the Lance Formation, the Lance-Fox Hills aquifer at the study site consisted only of the five sandstone beds of the Fox Hills Sandstone. The cross section constructed for this study illustrated how the Fox Hills Sandstone, and thus, most of the Lance-Fox Hills aquifer, consists of a series of sandstone bodies that overlap (shingle) upward to the east across southern Laramie County. These bodies collectively form a fairly continuous body of sandstone, thus potentially forming an areally extensive aquifer across southern Laramie County, and by extension, throughout most of the formation’s extent in the Wyoming part of the Cheyenne Basin, as is the case in the Colorado part of the basin. A monitoring well (FH–1) completed in part of the thickest sandstone bed of the Lance-Fox Hills aquifer was moderately to highly productive and easily produced 25 to 30 gal/min after development. Substantially larger water production rates likely could be obtained by penetrating the full thickness of this bed and by completing a well open to the other overlying and underlying sandstone beds of the aquifer. Analysis of the water-level responses in well FH–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties computed based on these responses yielded values for a lower bounding estimate for K of 0.26 ft/d, for Ss of 1.0×10 −6 ft −1 , and for n of 0.41. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−1.74 ft/yr) during the period analyzed, December 19, 2014, to September 30, 2017. Sampling of monitoring well FH–1 and two production wells completed in the Fox Hills Sandstone in other parts of Laramie County indicated groundwater quality generally is excellent, although pH exceeded a recommended EPA aesthetic drinking-water standard (Secondary Maximum Contaminant Level) in two of three sampled wells, total dissolved solids concentrations exceeded the Secondary Maximum Contaminant Level in one of the two sampled production wells, and dissolved sodium was measured in all three sampled wells at a concentration greater than two EPA DWA levels for the constituent. The Wyoming Class II agricultural (irrigation) sodium adsorption ratio standard of 8 was exceeded in all three sampled wells, indicating these waters are not suitable for irrigation use. Computed vertical hydraulic gradients indicated a strong potential for downward flow throughout the groundwater system at the study site, including from the low-yielding aquifer in the upper White River Formation/hydrogeologic unit (monitoring well BR–1) to the sandstone subaquifer in the Lance Formation/hydrogeologic unit (monitoring well LN–1), and from the Lance subaquifer (monitoring well LN–1) to the sandstone bed/aquifer that composes much of the Lance-Fox Hills aquifer thickness at the study site (monitoring well FH–1). However, large hydraulic-head differences between wells indicated high resistance to vertical flow attributable to the low vertical hydraulic conductivity of intervening strata, which consisted almost entirely of low-permeability mudrocks. The confined nature of the sandstone aquifers monitored by the various wells coupled with dissimilarities between groundwater-level fluctuations and trends in groundwater levels indicated downward flow through the intervening strata (primarily mudrocks in the various lithostratigraphic/hydrogeologic units) between the examined sets of wells likely was small.

Wyoming↗
USGS1978

Mercury analysis of sediments from cores in Clear Lake, Lake County, California

Cores of late Quaternary sediments were collected from several sites in Clear Lake (fig. 1). Samples from two of these cores (fig. 2, 3) have been analyzed for their mercury content as part of a study on the time of emplacement of the mercury ore body at the nearby Sulphur Bank mine (fig. 1). The samples were analyzed in laboratories of the U.S. Geological Survey by the mercury vapor detector method (Vaughn and McCarthy, 1964; Vaughn, 1967). The analyses of core 6, except samples 332, 341, 343, 386, 406, and 462, were done by Mr. Kam Leong (Table 1); the remaining analyses were done by Mr. Allen Meier. Analyses of core 10 (table 2) were done by Mr. Meier. Meier reported interference by organic material in the samples he analyzed. Because the two sets of data are not in agreement, most of the samples submitted to Leong and Meier are being reanalyzed.

California↗